FABRICATION FORM. CORRUGATED MANHOLE/CATCH BASIN 300 mm (12 in) TO 900 mm (36 in) FOR NON-ROADWAY USE
|
|
|
- Job Underwood
- 5 years ago
- Views:
Transcription
1 ORRUGTED MNHOLE/TH SIN TO FOR NON-RODWY USE PROJET : FRME HEIGHT TOP LIENT : TELEPHONE :_ PPROVED Y : H STD: 1.3 m (4.3 ft) QUNTITY : MNHOLE/TH SIN NUMER : s on the site plan. DIMENSIONS : 1 Nomal diameter : Height(H) : Standard 1.3 m (4.3 ft) Other : m ft H1 OTTOM INVERT OUTLETS ND OUPLERS : 2 Outlet diameter () H1 () NGLE (º) 3 TYPE OF OUPLER Standard : Top view PLIN SNP GSKT. PV D FRMES and OVERS/GRTES : None HDPE grate Frame and grate S series cast iron Frame and cover S series cast iron OUTLET NGLES : OPTIONS : Ladder (galvanised steel, stalled) Hook or eyelet (for hookg system) PPROVL OMMENTS : 1
2 ORRUGTED MNHOLE/TH SIN 1050 (42 ) TO 1200 (48 ) FOR NON-RODWY USE PROJET : HUTEUR FRME HEIGHT DRE TOP 1 LIENT : 300 (11.8 ) MIN TELEPHONE :_ PPROVED Y : QUNTITY : MNHOLE/TH SIN NUMER : s on the site plan. 300 (11.8 ) MIN 3 2 1,5 m (4,9 ft) MIN H DIMENSIONS : 1 Nomal diameter : INVERT H1 OTTOM Height (H) : _ m ft OUTLETS ND OUPLERS : 2 Outlet diameter () H1 () NGLE (º) 3 TYPE OF OUPLER Standard : Top view PLIN SNP GSKT. PV D FRMES and OVERS/GRTES : Frame and grate S series cast iron None Frame and cover S series cast iron OUTLET NGLES : OPTIONS : Ladder (galvanised steel, stalled) Hook or eyelet (for hookg system) Safety platform PPROVL OMMENTS : 2
3 TH SIN WITH SMOOTH EXTERIOR WLL TO FOR RODWY* OR NON-RODWY USE PROJET : LIENT : TELEPHONE :_ PPROVED Y : QUNTITY : TH SIN NUMER : s on the site plan. DIMENSIONS : 1 Nomal diameter : Height(H) : Standard 2.0 m (6.6 ft) Other : m ft OUTLETS ND OUPLERS : FRME HEIGHT H STD: 2 m (6.6 ft) H1 TOP OTTOM INVERT 2 Outlet diameter () H1 () NGLE (º) 3 TYPE OF OUPLER Standard : Top view PLIN SNP GSKT. PV D FRMES and OVERS/GRTES : djustable cast iron frame, guide frame and grate ** **no guide frame Roadway None Rectangular adjustable cast iron frame, guide frame and grate x (14 x 24 ) x (18 x 36 ) Roadway Frame and grate S series cast iron OUTLET NGLES : OPTIONS : Hook or eyelet (for hookg system) Lift eyelets (anchors not cluded) PPROVL OMMENTS : * Note : When used with a suitable frame and grate. 3
4 MNHOLE WITH SMOOTH EXTERIOR WLL TO 900 (36 ) FOR RODWY* OR NON-RODWY USE PROJET: DTE REQUIRED: LIENT: TELEPHONE: PPROVED Y: QUNTITY: MNHOLE NUMER: s on the site plan. DIMENSIONS : 1 Nomal diameter : Height(H) : Standard 2.0 m (6.6 ft) Other : m ft FRME HEIGHT H STD: 2 m (6.6 ft) H1 TOP OTTOM INVERT OUTLETS ND OUPLERS: 2 Outlet diameter () H1 () NGLE (º) 3 TYPE OF OUPLER Standard: Top view PLIN SNP GSKT. PV D FRMES and OVERS/GRTES : djustable cast iron frame, guide frame and grate None Frame and cover S series cast iron Roadway OUTLET NGLES : OPTIONS : Ladder (galvanised steel, stalled) Lift eyelets (anchors not cluded) Safety platform PPROVL OMMENTS : * Note : When used with a suitable frame and grate. 4
5 MNHOLE WITH SMOOTH EXTERIOR WLL 1,050 (42 ) TO 3,350 (132 ) FOR RODWY* OR NON-RODWY USE PROJET : LIENT : TELEPHONE :_ PPROVED Y : QUNTITY : MNHOLE NUMER : s on the site plan. DIMENSIONS : 1 Nomal diameter : Height (H) : _ m ft OTTOM TOP FRME HEIGHT 300 (11.8 ) MIN 300 (11.8 ) MIN INVERT 1.5m (4.9 ft) MIN H OUTLETS ND OUPLERS : 2 Outlet diameter () H1 () NGLE (º) 3 TYPE OF OUPLER Standard : Top view PLIN SNP GSKT. PV D FRMES and OVERS/GRTES : djustable cast iron frame, guide frame and cover None Roadway OUTLET NGLES : OPTIONS : Ladder (galvanised steel, stalled) Lift eyelets (anchors not cluded) Safety platform PPROVL OMMENTS : * Note : When used with a suitable frame and grate. 5
6 MNHOLE/TH SIN HIMNEY TYPE TO FOR RODWY* OR NON-RODWY USE PROJET : DTE REQUIRED : _ LIENT : TELEPHONE : PPROVED Y : QUNTITY : MNHOLE NUMER : s on the site plan. FRME HEIGHT DIMENSIONS: ) Diameters himney : onduit : _ Smooth exterior wall (FOR RODWY) orrugated wall (NON-RODWY) po po OTTOM INVERT ) Heights H : po H1 (bottom) : po NGLE ( ) EDGE : Male Female ) Lengths L totale : L1 : po po D) ngle : L1 FRMES and OVERS/GRTES : None L2 djustable cast iron frame, guide frame and cover Frame and cover S Series cast iron Frame and grate S series cast iron djustable cast iron frame, guide frame and grate Non-Roadway Non-Roadway Roadway OPTIONS : Ladder (galvanised steel, stalled) Lift eyelets (anchors not cluded) PPROVL OMMENTS : * Note : When used with a suitable frame and grate. 6
7 STNDRD OR USTOM-MDE RISER FOR MNHOLE OR TH SIN WITH SMOOTH EXTERIOR WLL PROJET : LIENT : FOR OFFIE USE ORDER #:_ D1 H1 H2 Diameter D1 Quantity Rgs Specify lengths 2 3 Standard (accordg to data sheet) or H1 : H2 : Note : For a manhole riser, validate the ladder height before orderg. PPROVL OMMENTS : 7
8 OUTSIDE OR INSIDE DPTER PROJET : OUTSIDE DPTER LIENT : TELEPHONE :_ PPROVED Y : QUNTITY: SOLENO PIPE NOMINL DIMETER : Ø EXISTING ONRETE PIPE ~ EXISTING STEEL PIPE ~ TYPE OF OUPLER PLIN ~ SNP ~ GI ~ Ø Ø NEOPRENE ~ INSIDE DPTER SOLENO PIPE NOMINL DIMETER : Ø EXISTING ONRETE PIPE ~ EXISTING STEEL PIPE ~ TYPE OF OUPLER PLIN ~ SNP ~ GI ~ Ø Ø NEOPRENE ~ PPROVL OMMENTS : 8
9 MONOLITHI TH SIN INLET/ONNETION PROJET : LIENT : TELEPHONE :_ PPROVED Y: VIEW FROM MLE SIDE 4 m (13.1 ft) 3.8 m (12.5 ft) 3 m (9.8 ft) 2 m (6.5 ft) 1 m (3.3 ft) MLE SIDE ell with tegrated gasket FEMLE SIDE 6 m (19.7 ft) 5.8 m (19 ft) 5 m (16.4 ft) 4 m (13.1 ft) 3 m (9.8 ft) 2 m (6.5 ft) 1 m (3.3 ft) MLE SIDE ell snap FEMLE SIDE # IDENTIFITION 4 m (13.1 ft) Ø MIN 6 m (19.7 ft) Ø FEEDER MIN (ONNETIONS) GSKT. SNP PV HDPE SNP HDPE GSKT. 1 m (3.3 ft) 2 m (6.5 ft) ONNETIONS POSITIONING 3 m (9.8 ft) MLE END 3.8 m (12.5 ft) 4 m (13.1 ft) 5 m (16.4 ft) 5.8 m (19 ft) NGLE QTY OMMENTS : 9
10 QU-SWIRL PROJET : SITE : LIENT : PHONE E-MIL : DTE REQUIRED : DESIGNING ENGINEER : OMPNY ND ONTT INFORMTION : INSPETION ONTRT ND MINTENNE REQUIRED : YES NO TRETMENT DEVIE SPEIFITIONS : Rate of flow to be treated : L/s Model number (if specified the plans) : S-X ONLY FOR LÉVIS rea (ha) Runoff oefficient Onle Offle Onle or offle configuration : Onle Offle If offle, how many bypass manholes? _ Pipe diameter : let outlet Pipe Type : let outlet Invert : let outlet ngle between let and outlet les : _ Slope of the let le : % Slope of the outlet pipe : % Direction of flow (clockwise or counterclockwise) : _ Elevation of the water table : Fal grade (fished ground elevation) : PPROVL Will unit be subjected to traffic loadg? YES NO OMMENTS : 10
11 NON-STNDRD MNHOLE DPTER - to PROJET : LIENT : FOR OFFIE USE ORDER # :_ Type of openg Specify the diameter SOLFLO MX () Quantity Product Drawg Specify dimension required PV : : PV : : : oncrete : : : : PPROVL OMMENTS : 11
12 NON-STNDRD MNHOLE DPTER (42 ) to 1200 (48 ) PROJET : DTE REQUIRED : LIENT : FOR OFFIE USE ORDER # :_ Type of openg Specify the diameter SOLFLO MX () Quantity Product Drawg Specify dimension required oncrete 1050 (42 ) M 1200 (48 ) M : : oncrete 1050 (42 ) F 1200 (48 ) F : : oncrete 1050 (42 ) S 1200 (48 ) S : : Legend : M = male outlet with O-rg seal; F = female outlet; S = smooth outlet with collar sleeve; both male rgs of the pipe to connect must be cut before stallation PPROVL OMMENTS : 12
13 STNDRD OR USTOM MDE ELOW PROJET : LIENT : FOR OFFIE USE ORDER # :_ D1 D1 L2 L1 L2 L sections D1 Diameter Quantity ngle Fittg Specify lengths 100 (4 ) 150 (6 ) 200 (8 ) 250 (10 ) sections Side Pla end lip Standard (accordg to data sheet) or L1 : Side L2 : Not required for 90 Pla end lip 1050 (42 ) 1200 (48 ) PPROVL OMMENTS : 13
14 STNDRD OR USTOM MDE ROSS ND ROSS-REDUER PROJET : LIENT : FOR OFFIE USE ORDER # :_ D2 D1 L2 D1 L2 L1 ross L1 ross-reducer D1 Diameter D2 Diameter Quantity Fittg Specify lengths 100 (4 ) 150 (6 ) 200 (8 ) 250 (10 ) 100 (4 ) 150 (6 ) 200 (8 ) 250 (10 ) Side Pla end lip Standard (accordg to data sheet) or L1 : L2 : Side Pla end lip 1050 (42 ) 1200 (48 ) PPROVL OMMENTS : 14
15 STNDRD OR USTOM MDE REDUER PROJET : LIENT : FOR OFFIE USE ORDER # :_ PLQUE PEHD SOUDÉE D1 D2 L1 L2 D1 Diameter D2 Diameter (If different from D1) Quantity Fittg Specify lengths 150 (6 ) 200 (8 ) 250 (10 ) 100 (4 ) 150 (6 ) 200 (8 ) 250 (10 ) Side Pla end lip Side Standard (accordg to data sheet) or L1 : L2 : Pla end lip PPROVL OMMENTS : 15
16 STNDRD OR USTOM TEE / REDUER-TEE OR ORRUGTED MNHOLE/TH SIN-TEE PROJET : LIENT : FOR OFFIE USE ORDER # :_ L2 D1 D1 Diameter L1 Tee D2 Diameter (If different from D1) Tee-reducer Quantity Fittg Specify lengths 100 (4 ) 150 (6 ) 200 (8 ) 250 (10 ) 100 (4 ) 150 (6 ) 200 (8 ) 250 (10 ) Side Pla end lip Side Pla end lip Side Standard (accordg to data sheet) or L1 : L2 : PPROVL Pla end 1050 (42 ) lip 1200 (48 ) FRMES and OVERS/GRTES : None HDPE grate Frame and grate S series cast iron OMMENTS : 16 Frame and cover S series cast iron
17 STNDRD OR USTOM MDE WYE (Y) ND WYE (Y) REDUER PROJET : LIENT : FOR OFFIE USE ORDER # :_ D2 Y Y-reducer D1 Diameter D2 Diameter (If different from D1) Quantity Fittg Specify lengths 100 (4 ) 150 (6 ) 200 (8 ) 250 (10 ) 100 (4 ) 150 (6 ) 200 (8 ) 250 (10 ) Side Pla end lip Standard (accordg to data sheet) or L1 : Side Pla end lip L2 : 1050 (42 ) 1200 (48 ) Side Pla end lip PPROVL OMMENTS : 17
Future Extension of Total Area 51.10m2 Core House of Total Area 38.57m2
Legend: 7.50 1 2 3 2.80 2.60 7.50 4.50 3.00 03 3.74 3.70 01 3.74 3.70 1.30 rawing : 2.22 3.10 3.80 8.00 2.22 3.09 01 01 01 3.80 8.00 1/60 4 R-PL-01 rev. escription ate 1.23 1.30 2.80 2.60 1.23 02 02 1.30
CONSTRUCTION SPECIFICATION FOR MAINTENANCE HOLE, CATCH BASIN, DITCH INLET, AND VALVE CHAMBER INSTALLATION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 407 NOVEMBER 2013 CONSTRUCTION SPECIFICATION FOR MAINTENANCE HOLE, CATCH BASIN, DITCH INLET, AND VALVE CHAMBER INSTALLATION TABLE OF CONTENTS 407.01
CONCRETE MANHOLES.
CONCRETE CONCRETE SHAW PIPE produces circular, precast, concrete manholes in diameters 1050mmØ through 3000mmØ. Precast, concrete manholes are most frequently used for pipeline and sewer entry and are
Pipe Product Catalog Table of Contents
Pipe Product Catalog Table of Contents Section A: Drawing #: Page Description A1 Reinforced Concrete Pipe A3 Storm Manhole Sizing Chart (48" - 96") A3.1 Storm Manhole Sizing Chart (108" - 144") A4 48"
DROP FORGED TURNBUCKLES
(Class C) (Class B) (Class B) & Take-up Body Only Maximum load ratgs are based on a straight vertical lift a gradually creasg manner. Any deviations as angular lifts, shock loads, modification of the basic
MH Table of Contents Standard Title/Scope Page Table of Contents SCE Public
MH Table of Contents Standard Title/Scope MH 300 MH 310 MH 318 MH 320 MH 325 MH 330 MH 335 MH 340 MH 350 Manholes Requirements MH 300.1 Manholes Requirements...........................................
Manholes Table of Contents
Standard MH 300 Title Manholes Requirements MH 300.1 Manholes Requirements Manholes Table of Contents Underground Structures Standards MH 310 MH 318 MH 320 MH 325 MH 330 MH 335 MH 340 MH 350 Precast Tub-Type
SECTION MANHOLES
SECTION 02601 MANHOLES PART 1 GENERAL 1.01 SCOPE OF WORK A. WORK required under this section consists of all materials, accessories, equipment, tools, and labor required to install precast concrete standard
TIMARU DISTRICT COUNCIL 2 King George Place P.O. Box 522 Timaru 7940 Telephone: Website:
INITIAL SURVEY ILE: CHANGES TO CORBEL DETAIL REVISION BY CHK APP. PLANNING.dwg 711696 AS SHOWN PERMISSION O THE CODE O PRACTICE TYPICAL PRECAST CONCRETE MANHOLE DETAILS 1 13 A B INITIAL SURVEY ILE: CHANGES
MAINTENANCE HOLES, CATCH BASINS AND DITCH INLETS - MTC FORM 407 INDEX
407-1 - MAINTENANCE HOLES, CATCH BASINS AND DITCH INLETS - MTC FORM 407 INDEX 407-1.1 GENERAL Tender Items Specifications Standard Drawings 407-1.1.1 Frame and Grate Selection 407-1.1.2 Selection of Structure
HEADED ANCHOR BOLT OPTION
Ground Rod 18" min. Depth, 2 Required nchor Bolts. Number (min. 8) and Size as Required by Manufacturer. 6" to 12" Ground Line " dia. Conduit Number and Direction as Shown on Lighting Layout Sheets. Slope
Manhole or Catch Basin Type A & B Cone Sections Precast - Design F Manhole or Catch Basin Cover (Reducer Cone Section Precast) Design D
MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards ISSUED BY: Office of Program Management and Technical Support, Design Support Section TRANSMITTAL LETTER NO. (14-02) MANUAL: Standard
Flange Dimensions Class 125 Bronze Flange Dimensions Class 300 Bronze Flange Dimensions Class 150 Bronze Flange Dimensions
Dimensions Class Bronze Dimensions Meets Ib. A.S.M.E. Stard Class 00 Bronze Dimensions Meets ANSI STD B. Nominal Dim. A O.D. Dim. B Circle Dim. C Hole No. Holes Nominal Dim. A Diam. Dim. B Min. Dim. C
C-M TMR Products Index
C-M TMR Products Index TMR Dwg. No. Grate/Frames 9x6 Dwg. AS3996 Recessed Road Gully Units Dwg. 1443, 1444 Protruded Road Gully Units Dwg. 1443, 1444 1220 Road Gully Units Dwg. 1459 7x4 Road Gully Units
STANDARD CATCH BASIN GUTTER LINE CB INLET FRAME & GRATE, GROUTED TO GRADE RINGS AS REQ'D CONCRETE CURB FINISHED GRADE ASPHALT MAX 50 MIN
CB INLET FRAME & GRATE, GROUTED TO GRADE RINGS AS REQ'D ASPHALT 20 GUTTER LINE CONCRETE CURB FINISHED GRADE PRECAST GRADE RINGS, 2 50 100 MAX PRECAST CB LID GROUT ALL AROUND CB LEAD, INSIDE & OUTSIDE OF
Anti-Trust Statement
Anti-Trust Statement http://www.concrete-pipe.org/ A joint effort of the Texas Concrete Pipe Association and the Texas Department of Transportation What brought this about? The TxDOT organization consists
S.R. 32 AT GRADE CROSSING
DESIGNTION CONTRCT THE CITY OF NOBLESVILLE RILROD PLNS S.R. 3 T GRDE CROSSING The Noblesville 8th Street railroad crossing replacement from south of S.R. 3 to Logan Street will GROSS LENGTH:- 0.03 mi.
Utility Structures. Utility vaults, trenches, transformer pads Electrical Pole Bases and switching cubicles
Utility Structures Utility vaults, trenches, transformer pads Electrical Pole Bases and switching cubicles PRODUCT GUIDE & TECHNICAL REFERENCE MANUAL Providing the right solutions. UTILITY STRUCTURES Perfect
MANHOLES PART I: GENERAL. A. Precast Concrete Manholes
MANHOLES PART I: GENERAL A. Precast Concrete Manholes 1) Manholes shall be made of precast concrete sections of which the top section shall be eccentric or flat slab top. The bottom section shall be a
CS3 represents manufacturers of products for use in the municipal waterworks industry.
Brian Drexel & Rob Grier WWW.CS3WATERWORKS.COM Established in 2000, CS3 Waterworks is a Florida Based company with offices in Orange Springs Florida and Savannah Georgia. CS3 represents manufacturers of
Code Review The following is a review of selected portions of the International Building Code 2015 (IBC2015) which apply to this project.
ESIGNE Y: RWN Y: HEKE Y: TE: SLE: //07 /" = '-0" OVER SHEET Hoover Metal uildings, Inc. PROJET FOR: PPROVLS: TE REVISIONS: Y: UILING "" P.O. ox 99 Lexington, S 907 (80)9-98 ode Review The following is
RECORD DRAWINGS REVISED TO CONFORM TO CONSTRUCTION RECORDS PROVIDED BY CONTRACTOR GMG BY DATE 11/13 CRS NO.
CELL: (715) 803-8009 MABOSI@WISCONSINPUBLICSERVICE.COM CELL: (715) 573-7806 CHVIRCKS@WISCONSINPUBLICSERVICE.COM CALVIN.KLADE@FTR.COM DGAU@KRONENWETTER.COM SCOTT OLSEN (715) 302-1348 S REVISED TO CONFORM
SECTION PRECAST CONCRETE SECTIONAL MANHOLES
SECTION 02545 PRECAST CONCRETE SECTIONAL MANHOLES PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: 1. Precast reinforced concrete cylindrical sectional manholes, complete with openings, inserts, hardware,
Piper GI Conduits. Heavy Gauge Welded GI Conduit, threaded
Piper GI Conduits Piper GI Conduits from Eurotube is a range of Conduits manufactured from high grade galvanized steel. The products are available in class 4 hot dipped galvanized, black enameled and class
AMENDMENT TO ADVERTISED CONTRACT
November 16, 2016 AMENDMENT TO ADVERTISED ONTRAT ONTRAT I.D. NUMBER: GEORGIA PROJET NUMBER: B1BA1601612-0 BRSLB-2015-00(003) PN: - OUNTY: TROUP AMENDMENT NUMBER: 2 LETTING NOVEMBER 18, 2016 LETTING NUMBER:
Current Standard Plates including Transmittal Letters are available on the web at:
MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards ISSUED BY: Office of Project Management and Technical Support, Design Support Section TRANSMITTAL LETTER NO. (17-04) MANUAL: Standard
CORR/GUARD. Viton diameters; integral sleeve design.
ORR/GUR - 3 diameters; integral sleeve design. Intergal Sleeve connections are formed to fit with precision at each connection. ll-welded construction provides liquid-tight performance and clean appearance.
NORTH CAROLINA DEPARTMENT OF HEALTH AND HUMAN SERVICES DIVISION OF PUBLIC HEALTH ENVIRONMENTAL HEALTH SECTION ON-SITE WATER PROTECTION BRANCH
NORTH CAROLINA DEPARTMENT OF HEALTH AND HUMAN SERVICES DIVISION OF PUBLIC HEALTH ENVIRONMENTAL HEALTH SECTION ON-SITE WATER PROTECTION BRANCH SEPTIC/PUMP TANK RISER ASSEMBLIES APPROVAL Septic/Pump Tank
FOR SERVICE BOXES IN CONCRETE DRIVEWAYS, SEE NOTE Min. COVER UNDER DITCHES. 600 Min. COVER
WOOD SERVICE MARKER STAKE (50 x 00) PAINTED BLUE PL mm FROM PROPERTY LINE STANDARD CONCRETE SERVICE BOX WITH EXTENSION AS REQ'D 00 FINISHED GROUND/ROAD SURFACE FOR SERVICE BOXES IN CONCRETE DRIVEWAYS,
ILA. Round ducts and fittings. Flexible duct connector for circular ducts without flanges. Dimensions. Description. ALNOR ventilation systems.
Flexible duct connector for circular ducts without flanges IA IA Flexible duct connector with male ends for joining two spiral or plain round ducts. Most commonly used for reducing vibration caused by
STRUCTURES FOR SANITARY AND STORM SEWERS
SUDAS Standard Specifications Division 6 - Structures for Sanitary and Storm Sewers Section 600 - Structures for Sanitary and Storm Sewers STRUCTURES FOR SANITARY AND STORM SEWERS PART - GENERAL.0 SECTION
INSTRUCTIONS: 1. Record the transmittal letter number, date, and subject on the transmittal record sheet located in the front of the manual.
MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards ISSUED BY: Office of Technical Support Design Services Section TRANSMITTAL LETTER NO. (0-03) MANUAL: Standard Plates DATED: September
Flush Round Single or Multi-Service Non-Metallic Concrete Floor Box Floor Boxes
Flush Round Single or Multi-Service Non-Metallic Concrete Floor ox Flush Round Single or Multi-Service Non-Metallic Concrete Floor ox Dimensions Inches (mm) D C PF1 Min. Depth of Pour 3.00" (76.2) Capacity
Section 8 Stainless Steel Buttweld Fittings & Flanges
Section 8 Stainless Steel uttweld Fittings & Flanges Edition 3 133 [8] STINLESS STEEL UTTWELD FITTINGS & FLNGES Specifications Stainless Steel utt Weld Fittings are made from the finest quality stainless
SECTION 095 SPECIFICATIONS DETAIL DRAWINGS. Index of Detail Drawings
SECTION 095 SPECIFICATIONS DETAIL DRAWINGS Index of Detail Drawings Flat Top Manhole... 095-1 Splash Drop Manhole and Regular Drop Manhole... 095-2 Special Detail Splash Drop Manhole and Special Detail
SECTION PUBLIC UTILITY MANHOLES AND STRUCTURES. 2. Modular precast concrete pump wetwell. 5. Manhole bedding and cover materials.
SECTION 02082 PUBLIC UTILITY MANHOLES AND STRUCTURES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Modular precast concrete manholes with tongue-and-groove joints, transition to cover frame, covers,
INSTALLATION INSTRUCTIONS. March 2016 FOR FURTHER QUESTIONS, PLEASE CALL
March 2016 INSTALLATION INSTRUCTIONS FOR FURTHER QUESTIONS, PLEASE CALL 775 440 2025 JENSEN WATER RESOURCES 521 Dunn Circle, Sparks, NV 89431 JensenPumps.com Figure 1: This illustration shows a complete
Standard Plate Sheer Reinforcement for Precast Drainage Structures has been updated upon recommendation of the Bridge Office.
MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards ISSUED BY: Office of Program Management and Technical Support, Design Support Section TRANSMITTAL LETTER NO. (13-03) MANUAL: Standard
SUBJECT: Standard Plate Turf Establishment Areas (at Pipe Culvert Ends)
MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards ISSUED BY: Office of Program Management and Technical Support, Design Support Section TRANSMITTAL LETTER NO. (14-01) MANUAL: Standard
DETAIL A SCALE 1 : 85
ISIONS ZONE LTR. ESRIPTION TE PP - INITIL RELESE PER N NORTH.0 0 EST ISOLTE P (0" X.") 0 9 0 X FOOKE # 0 ENTER ISOLTE P (" X 9") WEST ISOLTE P (0" X.") FOOKE # 0. RWING ONTENTS SHEET : OVERLL LYOUT SHEET
CONSTRUCTION PLANS COLLIER BOULEVARD & GOLDEN GATE CANAL 36" WATER MAIN DIRECTIONAL DRILL
CHIPLEY CONSTRUCTION PLNS COLLIER BOULEVRD & GOLDEN GTE CNL PENSCOL PNM CITY TLLHSSEE JCKSONVILLE LKE CITY ST UGUSTINE GINESVILLE DYTON BECH OCL DELND JOHNSON STREET P.O. BOX FORT MYERS, FLORID - PHONE:
24" B B Joint X501 Joint See MARKINGS Note PCB-RXX-350-TL3 " X501 Y301 (Typ.) " A PLAN (reinforced casting option shown) A " dia. Hinge Bar (Typ.) NOT
B B Joint Joint See MARKINGS Note PCB-RXX-350-TL3 " Y301 (Typ.) " A PLAN (reinforced casting option shown) A " dia. Hinge Bar (Typ.) NOTES GENERAL: This barrier may be manufactured with reinforcing steel
STORM M ANHOLE FOR 42" PIPE AND SM ALLER JOB NO. SHEET NO. DATE MARCH 2015 OF MIN OF 3 CRSES MAX OF 5 CRSES 30"MAX 3 OR 3.5 PRECAST ECCENTIC CONC
01-APR-2015 13:33 = I:\MSV8i\Plotting\piblack.ptb V:\201001\\C\8x11_Howell_Det\stm_det01_8x11_st01.dgn TIME = MIN 3 CRSES MAX 5 CRSES 3 OR 3.5 PRECAST ECCENTIC CONC ID PIPE GRADE A CONC FILL 4" 8" 2-0"SUMP
QUANTITY DISCOUNTS ARE AVAILABLE FOR CONNECTORS AND ADAPTORS
ONNETORS and DPTORS SUMMRY QUNTITY DISOUNTS RE VILLE FOR ONNETORS ND DPTORS ONNETORS ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ EI Flange 7/16" DIN N FME SM and SM TN UHF Mini-UHF MMX Micro Miniature Reverse
GENERAL NOTES USE OF DESIGN DATA SHEETS:
GENERL DT: TE FOLLOWING DT IS SSUMED: USE OF DT SEETS: ED REVIEWED INTERNL NGLE OF FRITION OF KFILL SOIL, = 30 TOTL UNIT WEIGT OF KFILL SOIL = 20 PF bf. LULTE TE REQUIRED EIGT "" PER TE "STEM EIGT" NOTE
Existing and proposed contours at 1-foot intervals. The fill and/or excavation quantities in cubic yards.
PLAN REQUIREMENTS The plans for street design shall conform to the requirements of Sections 3 and 4. The following requirements shall also be shown on the plans where applicable. Road and Storm Plans:
Appendix C Construction Details
7172 Kennedy Road Warrenton, Virginia 20187 Appendix C Construction Details November 2017 TABLE OF CONTENTS THRUST BLOCKS Anchorage for 11 1/4 o, 22 1/2 o & 45 o Upper Vertical Bends... AV 01 Buttresses
MUNICIPAL INFRASTRUCTURE
2440 MUNICIPAL INFRASTRUCTURE 100 50 90 90 1220 305 65 65 45 MUNICIPALITY OR SERVICE OARD Department of Municipal Affairs and Environment Hon., Minister 40 100 50 50 WHITE REFLECTIVE ACKGROUND 1. LETTERING
ERRATA APRIL Manual of Standard Practice 29th Edition, 1st Printing, 2018
RRT PRIL 2018 Manual of Standard Practice 29th dition, 1st Printing, 2018 The following pages supersede the versions currently shown in the RSI s Manual of Standard Practice, and shoule referenced as such.
MEDIUM DUTY CAST IRON SLIDE GATES SERIES 20-10C
MEDIUM DUTY CAST IRON SLIDE GATES SERIES 20-10C Revised October 2007 Armtec reserves the right to alter designs. General The Armtec Sluice Gate is a quality and highly economical gate for a variety of
5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
LORING THE SMARTER WAY TO ROAST PROPRIETARY ITEM:
TLE, MXIMUM WEIGHTS, L (KG) ROSTER (.) JOS TUING +. (.) ZONE.. 9.. 0.. 9. WLL TO L 0F STK 9.9 MINIMUM ROSTER LERNES R9.. ELETRIL ENLOSURE OOR OPENING EXHUST VENT JOS TUING EN ISION HISTORY ESRIPTION INITIL
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
AN INTRODUCTION IN PENSTOCKS
SPECIALISED IN WATE MANAGEMENT PODUCTS HISTOY From its beginnings in 1942, TBS SOEST bv has not only been a supplier of manhole covers and gullies, but has also established a reputation as a supplier of
ADVANCE PRODUCTS & SYSTEMS. Monolithic Isolating Joints. ISO-9001 Ce r t i f i e d Co m p a n y - FM537405
ADVANCE PRODUCTS & SYSTEMS Monolithic Isolatg Jots ISO-1 Ce r t i f i e d Co m p a n y - FM5375 Is ojo i n t Mo n o l i t h i c Is o l at i o n Jo i n t s 90 Diameter Is ojo i n t Monolithic Isolation
Charlotte County Utilities DESCRIPTION
As-built Drawings / Surveyor 1. Electronic copy of survey data in tabular form of the utility assets 2. A signed and sealed letter with the following statement: "I hereby certify that the as-built location
A '-4" 10'-10" 16'-6" 7'-0" 23'-0" 10 3/4" 9'-6" 5 1/4" 2'-11 1/2" 2'-6" 3'-2 3/4" 3'-1" 4'-8 3/4" 2'-5 3/4" 2'-6" 7'-2" R.O. HD 7'-3" R.O.
Name of Trust, First Floor Plan -. -. 7'-" 0'-0" '-" 7'-0" '-0" -. N '-0" 9'-0" 7'-" 7'-" '-0" '-" " 0" '- /" '-0" '- /" 9" '-0" 9" '-0" 0 /" '-" '- /" '-" '-" '-0" '-" 0 /" 9'-" /" '- /" '-" '- /" '-"
SECTION 8: DRAINAGE, SEWER AND WATER SUPPLY NETWORKS
UDNP Standard Specifications SECTION 8: DRAINAGE, SEWER AND WATER SUPPLY NETWORKS 8.01 - Page i UDNP Standard Specifications SECTION 8: DRAINAGE, SEWER AND WATER SUPPLY NETWORKS Table of Contents SECTION
* * 98/9949WDC. 1-Point Latch (LBL) 2-Point Latch includes these additional parts. Customer Service
*24017501* 24017501 Coneled Vertil Devie for Wood Doors 98/9949WDC Instlltion Instrutions 1-Point Lth (LBL) 2-Point Lth inludes these dditionl prts NOTE: If door does not hve utout for ling inside lok
PLASTIC PIPE & FITTINGS. September 14, 2017 K-1 NO-HUB SOIL PIPE & FITTINGS LUBRICANT BENDS CONNOLLY Y SV SOIL PIPE SADDLE
September 14, 2017-1 NO-HUB SOIL PIPE & FITTINGS NO-HUB SOIL PIPE LESS COUPLING SSC No. Manuf No. Size Length Price Each Price Per 100' 26C 0010 0156 1 1 /2" 10' $ 75.09 $ 750.90 26C 0110 0158 2" 10' 96.78
NOTES. 3D VIEW OF RAILING WITH TYPE 1 - PICKET INFILL PANEL (42" Height shown, 54" Height Similar) TABLE 1 - RAILING MEMBERS
NOTES :\d\projects\standards\structures\current\ready4release\20book\00852-of8.dgn 5/2/202 0:09:4 M D VIEW OF RILING WITH TYPE - PIKET INFILL PNEL (4 Height shown, 54" Height Similar) TLE - RILING MEMERS
Riser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18. Manual 40100X35-8
Riser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18 Manual 40100X35-8 3 2 4 Access covers with bolts supplied with Interceptor 1 5 14 6 11 15 Sampling Port/Cleanout cap supplied with Interceptor 12
Ford Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
LORING THE SMARTER WAY TO ROAST PROPRIETARY ITEM:
TLE, MXIMUM WEIGHTS, L (KG) ROSTER (9) JOS TUING + (9.) GREEN EN RT + (.) EXHUST STK VENT UTO HOPPER.9.. 9.. ZONE TRIER UTO ISHRGE OOR PPROVE J HUTTON. 0....0 9. WLL TO. 0..0 0. REOMMENE LERNE.0. REOMMENE
Oil-Water Separator Design Checklist
CHECKLIST C3 Revised 5/2/2016 Oil-Water Separator Design Checklist DISCLAIMER - This checklist is provided to Consulting Engineers for the express purpose of assisting them in compiling private oil-water
Typical Drawings for Schools
0.85 1.7 0.85 3 3 0.6 3 3 0.85 1.7 0.85 0.3 4 4 1 1 2 2 0.425 0.425 0.425 0.425 1.2 2.4 1.2 0.6 0.6 4 4 1 1 3 3 0.4 0.6 0.3 0.3 3 3 4 4 0.4 4 4 1 1 2 2 Detail of (W 1.2 x 0.4 m) Detail of (W0.6 x 0.4 m)
Sewer Line Extension Permit Design Checklist
CHECKLIST C1 Revised 4/7/2017 Sewer Line Extension Permit Design Checklist DISCLAIMER - This checklist is provided to Consulting Engineers for the express purpose of assisting them in compiling sewer line
MOE FLEXIBLE LEARNING SPACE NELSON 2-STOREY BLOCK WELLINGTON AND CHRISTCHURCH - OPTION 1
MOE FLEXILE LERNING SPE NELSON 2-STOREY LOK WELLINGTON N HRISTHURH - Plot ate: Office: Filename: 19/08/201 :18:4 a.m. -MOE-NELSON LOK ENTRL FILE 201 - ONRETE-_detached.rvt 1 TE N: 54 005 19 87 person using
CITY OF BEVERLY HILLS Department of Public Works and Transportation Civil Engineering Division STORM DRAIN IMPROVEMENT PLAN REVIEW CHECKLIST
CITY OF BEVERLY HILLS Department of Public Works and Transportation Civil ing Division STORM DRAIN IMPROVEMENT PLAN REVIEW CHECKLIST The following checklist consists of the minimum requirements for preparation
SECTION 39 - MANHOLES TABLE OF CONTENTS
SECTION 39 - MANHOLES TABLE OF CONTENTS Section Page 39-1 GENERAL... 39.1 39-2 PRECAST CONCRETE MANHOLES... 39.1 39-2.01 Precast Concrete Sewer Manholes... 39.1 39-2.02 Precast Concrete Storm Drain Manholes...
2. Remove from the Standard Plate manual: Standard Plate Index, Sheets 1-4 of 4, Numerical Index of Standard Plates (August 31, 2012)
MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards ISSUED BY: Office of Program Management & Technical Support, Design Support Section TRANSMITTAL LETTER NO. (12-04) MANUAL: Standard
F-5-1a. Concrete Bollards (Detail 1 of 2) WEIGHT: 166kg. WEIGHT: 227kg. WEIGHT: 113kg. WEIGHT: 212kg
Contents F-5-1a Concrete Bollards F-5-1b Concrete Bollards F-5-2 Concrete Bollards with City Logo F-5-3 Cast Iron Bollards F-5-4 Decorative Steel Bollard F-5-5 Swivel P Gate Steel Bollard F-5-6 Steel Bollard
TYPE J (20 FT - 40 FT) MICHIGAN DEPARTMENT OF TRANSPORTATION 10-0" 7-6" NOTE: sheet 5 & 6 of 10) DEPARTMENT DIRECTOR. Kirk T.
Column truss connection Chord splice (see details (See details sheets 3 & 4 of 10) s Top truss chord Free end panel 10-0" Support end panels length varies (See chart below) \ Truss Back truss chord Top
SUBJECT: Standard Plate 9102 Turf Establishment Areas At Pipe Culvert Ends
MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards ISSUED BY: Office of Project Management and Technical Support, Design Support Section TRANSMITTAL LETTER NO. (17-03) MANUAL: Standard
SWITCH STAND Switch Stand Assembly Connecting Rod Target Assembly (when required) TURNOUT ACCESSORIES Standard Tie Plates Rail Anchors Joints
Turnouts A turnout is an arrangement of a switch, a frog and closure rails, which diverts rolling stock from one track to another. Because industrial trackwork often handles lighter loads at slower speeds
THE IMPORTANCE OF THE FITTING
JOHNSON RISER PIPES Geometrical characteristics (diameter, depth), pump pressure and water quality are the principal factors determining the choice of the riser pipe and the fitting type. These choices
TYPE 4-C TYPE 6 TYPE 7 TYPE 8
````` Face of ase rad. 42 TYPE rad. " T T T 22.5 2'- unless otherwise shown on plans 5" 5" 5" Slope 2: TYPE 2 rad. Concrete TYPE 2-A rad. Wearing Course Concrete ase Course TYPE 2-0" rad. TYPE 3 As Shown
Grease Interceptor Design Checklist
CHECKLIST C2 Revised 5/2/2016 Grease Interceptor Design Checklist Public Works DISCLAIMER - This checklist is provided to Consulting Engineers for the express purpose of assisting them in compiling private
TOTAL NUMBER OF 150 WATT HPS CONVENTIONAL CUTOFF TYPE 3 LUMINAIRES MOUNTED ON ALUMINUM POLES
FEDERAL PROJET LEGEND OF SYMBOLS PROPOSED FOUNDATION AND METER ABINET, TYPE 2M-M PROPOSED 18"X36" JUNTION BOX GENERAL NOTES PROPOSED JUNTION BOX FOUNDATION TOTAL NUMBER OF LIGHTING UNITS ON THE PROJET
Stargrip series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Stargrip series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe INFORMATION The Stargrip Mechanical Joint Restraint System is a unique product with a proven design that provides an exceptional
Ford Couplings For Pipe And Tubing
Section J 6/2002 Ford Couplings For Pipe And Tubing The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
Standard Specifications
Standard Specifications PART 1.00 GENERAL 1.01 DECRIPTION SECTION 02620 PRECAST REINFORCED CONCRETE SANITARY MANHOLES A. Work included: The Contractor shall furnish all labor, materials, equipment, and
SYARIKAT BEKALAN AIR SELANGOR SDN BHD
NOTE : 1. FOR LEGEND, ABBREVIATION AND GENERAL NOTES SEE DRG. NO. SYA / STD / 001. 2. ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE STATED. 3. ACTUAL LENGTH OF PE COMMUNICATION PIPES SHALL BE DETERMINED ON
400 SERIES GRINDER PUMPS 41502, 42202,43302, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 6 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 400 SERIES GRINDER PUMPS 41502, 42202,43302, AND 44402 MODELS DESIGN FEATURES Housing: Cast iron Pump Rotor: Chrome
LOWNDES COUNTY ENGINEERING PLAN REVIEW CHECKLIST. Design Professional: Phone: Developer: Phone: 2 nd Submittal (No Fee)
MEMORANDUM MICHAEL B. FLETCHER, P.E. COUNTY ENGINEER 327 N. Ashley Street Valdosta, GA 31601 Telephone: (229) 671-2424 Fax: (229) 245-5299 mfletcher@lowndescounty.com LOWNDES COUNTY ENGINEERING PLAN REVIEW
(50 FT FT) MICHIGAN DEPARTMENT OF TRANSPORTATION 10-0" 7-6" 8-0" 6-0" Truss Depth. 3" sheets 5 & 6 of 10) DEPARTMENT DIRECTOR. Kirk T.
Column truss connection (See details sheets 3 & 4 of 10) \ Span (Odd number of panels) \ Span (Even number of panels) Back truss chord Top truss chord \ Truss Chord splice Truss depth (See details \ Left
, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45,
CHPTER FEEER GGE Made of hardened alloy steel Meet DIN7 : ±(+T/8) µm, T is the thickness of leaves in µm leaf 7 - Thickness of leaves included () -.-..,.,.,.7,.8,.9,.,.,.,.,.,.,.,.,.,.,.,.,.7,.7,.8,.8,.9,.9,.
Ring Type Joint CALVOSEALING DESCRIPTION
CALVOSEALING Ring Type Joint DESCRIPTION Ring Type Joints are metal ring to be used with elevated pressure and temperature applications. The sealing contact area results very reliability. Sealing gasket
18" 1.5" 3"R 11.5" 10" 3-1/2" MINIMUM STONE CUSHION GRADATION CA-6
18" 1.5" 3"R 1.5" 4"R 1" 11.5" 10" 13.5" 5" 3-1/2" MINIMUM STONE CUSHION GRADATION CA-6 NOTES: 1. REINFORCEMENT: PROVIDE TWO (2) #4 REINFORCING BARS CONTINUOUS BETWEEN EXPANSION JOINTS, WITH LOCATION SPACING
Ti-Color STAINLESS STEEL HANDRAIL
Ti-Color STINLESS STEEL HNDRIL Handrail Custom-made Rail HNDRIL STNDRD Handrail Custom-made rail Vertical Type Horizontal Type Elegance Type HNDRIL TYPE Vertical Type 5001 / 6001 6002 / 7002 5004 / 6004
APPENDIX 1: CONSTRUCTION PLAN CHECKLIST
APPENDIX 1: CONSTRUCTION PLAN CHECKLIST October 2017 APPENDIX A APPENDIX 1: CONSTRUCTION PLAN CHECKLIST ALL PLANS Plans on 24-inch by 36-inch paper (Originals shall be transmitted on a CD as an electronic
Plate 8132A - Preformed Rigid PVC Conduit Loop Detector, is a new plate requested by OTST.
DISTRIBUTION: 7 MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards ISSUED BY: Design Services Section TRANSMITTAL LETTER NO. (0-0) MANUAL: Standard Plates DATED: January 9, 00 SUBJECT:
UTILITY AND STREET CONSTRUCTION PLAN REQUIREMENTS SECTION 1
UTILITY AND STREET CONSTRUCTION PLAN REQUIREMENTS SECTION 1 ENGINEERING STANDARDS FOR UTILITY AND STREET CONSTRUCTION PLANS MARCH 2014 CONSTRUCTION PLAN SHEET FORMAT REQUIREMENTS REPRODUCIBLE MYLAR 1.
D. Thermally Sprayed Metallic Coating (Flame Spray): STD SPEC
STANDARD SPECIFICATION SECTION 05121 MISCELLANEOUS METALWORK PART 1 - GENERAL 1.01 DESCRIPTION This section includes materials, fabrication, and installation of structural steel, connecting bolts, pipes,
RemoteTeller SYSTEM - RTS VAT 21 GX CUSTOMER UNIT COMPONENTS CUSTOM DESIGNED CUSTOMER AREA
SEND SEND CLL CLL L " LCD COLOR MONITOR 4-29- COLOR CCD CMER 4-29- 486G VT 2 GX CUSTOMER UNIT CLL -8-999-6 LISTINGS ND PPROVLS CLSSIFIED TO UL 4R SFETY OF INFORMTION TECHNOLOGY EQUIPMENT UL TESTED TO THE
SUBJECT: Standard Plates 4132, 4155, Drainage Structures and Castings Info
MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards ISSUED BY: Office of Project Management and Technical Support, Design Support Section TRANSMITTAL LETTER NO. (18-01) MANUAL: Standard
ADA-COMPLIANT SAFETY DEVICES PRODUCT GUIDE. SafetyRail TM Barricade SafetyWall TM Barricade BoardWalk Temporary RAMP
ADA-COMPLIANT SAFETY DEVICES PRODUCT GUIDE SafetyRail TM Barricade SafetyWall TM Barricade BoardWalk Temporary RAMP SafetyWall TM ADA-COMPLIANT PEDESTRIAN BARRICADE Ideal for creating accessible work zones.
CITY OF VISTA STANDARD DRAWINGS
CITY OF VISTA STANDARD DRAWINGS May, 2015 THIS SHEET INTENTIONALLY LEFT BLANK TABLE OF CONTENTS MODIFICATIONS Modifications to San Diego Regional Standard Drawings DRAINAGE STRUCTURES DRN 01 Corrugated
ALUMINUM PEDESTRIAN/BICYCLE RAILING
MEMBER s (Type "" & "B") s (Type "") Top Plate (Type "") End Hoops Joint/Splice Sleeves Intermediate & Int. & onnection Sleeve Handrail Joint/Splice Sleeves Handrails Handrail Support Bar Pickets (Type
SYARIKAT BEKALAN AIR SELANGOR SDN BHD
NOTE : 1. FOR LEGEND, ABBREVIATION AND GENERAL NOTES SEE DRG. NO. SYA / STD / 001. 2. ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE STATED. 3. ACTUAL LENGTH OF PE COMMUNICATION PIPES SHALL BE DETERMINED ON