AUTODESK INVENTOR 11. Creating Production-Ready Drawings. Autodesk Training Courseware (AOTC)

Transcription

1 AUTODESK INVENTOR 11 Creating Production-Ready Drawings Official Autodesk Training Courseware (AOTC) A April 2006

2 Copyright 2006 Autodesk, Inc. All rights reserved. This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. AUTODESK, INC., MAKES NO WARRANTY, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS, AND MAKES SUCH MATERIALS AVAILABLE SOLELY ON AN AS-IS BASIS. IN NO EVENT SHALL AUTODESK, INC., BE LIABLE TO ANYONE FOR SPECIAL, COLLATERAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF PURCHASE OR USE OF THESE MATERIALS. THE SOLE AND EXCLUSIVE LIABILITY TO AUTODESK, INC., REGARDLESS OF THE FORM OF ACTION, SHALL NOT EXCEED THE PURCHASE PRICE OF THE MATERIALS DESCRIBED HEREIN. Autodesk, Inc., reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product at all times in the future. Autodesk Trademarks The following are registered trademarks of Autodesk, Inc., in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3D Studio, 3D Studio MAX, 3D Studio VIZ, 3ds Max, ActiveShapes, Actrix, ADI, AEC-X, Alias, Alias (swirl design/logo), Alias Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD LT, Autodesk, Autodesk Envision, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, Autodesk WalkThrough, Autodesk World, AutoLISP, AutoSketch, Backdraft, Bringing information down to earth, Buzzsaw, CAD Overlay, Can You Imagine, Character Studio, Cinepak, Cinepak (logo), Civil 3D, Cleaner, Combustion, Create>what s>next (design/logo), DesignStudio, Design Studio (design/logo), Design Your World, Design Your World (design/logo), EditDV, Education by Design, FBX, Filmbox, Gmax, Heidi, HOOPS, HumanIK, i-drop, IntroDV, Kaydara, Kaydara (design/logo), Lustre, Maya, Mechanical Desktop, ObjectARX, Open Reality, PortfolioWall, Powered with Autodesk Technology (logo), ProjectPoint, RadioRay, Reactor, Revit, SketchBook, Visual, Visual Construction, Visual Drainage, Visual Hydro, Visual Landscape, Visual Roads, Visual Survey, Visual Toolbox, Visual Tugboat, Visual LISP, Voice Reality, Volo, WHIP!, and WHIP! (logo). The following are trademarks of Autodesk, Inc., in the USA and other countries: AutoCAD Learning Assistance, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, AutoSnap, AutoTrack, Built with ObjectARX (logo), Burn, CAiCE, Cinestream, Cleaner Central, ClearScale, Colour Warper, Content Explorer, Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, Design Web Format, DWF, DWFit, DWG Linking, DWG TrueConvert, DWG TrueView, DXF, Extending the Design Team, GDX Driver, Gmax (logo), Gmax ready (logo), Heads-up Design, Incinerator, jobnet, LocationLogic, MotionBuilder, ObjectDBX, Plasma, PolarSnap, Productstream, RealDWG, Real-time Roto, Render Queue, StudioTools, Topobase, Toxik, Visual Bridge, Visual Syllabus, and Wiretap. Autodesk Canada Co. Trademarks The following are registered trademarks of Autodesk Canada Co. in the USA and/or Canada and other countries: Discreet, Fire, Flame, Flint, Flint RT, Frost, Glass, Inferno, MountStone, Riot, River, Smoke, Sparks, Stone, Stream, Vapour, Wire. The following are trademarks of Autodesk Canada Co., in the USA, Canada, and/or other countries: Backburner, Multi-Master Editing. Third Party Trademarks Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. TList 5 Active X control, Bennet-Tec Information Systems. All other brand names, product names or trademarks belong to their respective holders. All other brand names, product names, or trademarks belong to their respective holders. Third Party Software Program Credits 2D DCM UGS Corp. All rights reserved. ACIS Spatial Corp. CDM UGS Corp. All rights reserved. COPRA MetalBender data M Software GmbH. All rights reserved. dbase databased Intelligence., Inc. All rights reserved. FLEXlm Macrovision Corp. All rights reserved. HTML Help Microsoft Corp. All rights reserved. Internet Explorer Microsoft Corp. All rights reserved. libpng Glenn Randers-Pehrson. Contributing Authors: John Bowler, Kevin Bracey, Sam Bushell, Simon-Pierre Cadieux, Andreas Dilger, Magnus Holmgren, Tom Lane, Dave Martindale, Eric S. Raymond, Greg Roelofs, Guy Eric Schalnat, Paul Schmidt, Tom Tanner, Cosmin Truta, Willem van Schaik, Gilles Vollant, and Tim Wegner. Macromedia Flash Player Adobe Systems, Inc. All rights reserved. Microsoft SQL Server Microsoft Corp. All rights reserved. Objective Grid Quovadx, Inc. All rights reserved. Portions Microsoft Corp. Portions International TechneGroup, Inc. All rights reserved. RSA Data Security, Inc., MD5 Message-Digest Algorithm RSA Data Security, Inc. All rights reserved. SafeCast Macrovision Corp. All rights reserved. SMLib IntegrityWare, Inc., and Solid Modeling Solutions, Inc. All rights reserved. TList Bennet-Tec Information Systems, Inc. All rights reserved. Typefaces 1992 Bitstream, Inc. All rights reserved

3 Typefaces 1992,1996 Payne Loving Trust. All rights reserved. uuencode/uudecode 1983 Regents of the University of California. All rights reserved. Visual Basic (logo) Microsoft Corp. All rights reserved. Visual Basic Microsoft Corp. All rights reserved. Windows NetMeeting Microsoft Corp. All rights reserved. Wise for Windows Installer Wise Solutions, Inc. All rights reserved. zlib Jean-loup Gailly and Mark Adler. Objective Grid control licensed from Quovadx, Inc. Portions of this software licensed from UGS Corp. Portions of this software are based on the work of the Independent JPEG Group. This software contains Macromedia Flash Player software by Adobe Systems, Inc. TList control licensed from Bennet-Tec Information Systems, Inc. XpressFreeLib, XpressQuantumTreeList, XpressSideBar, XtraBars for XtraGrid, XtraGrid, and XtraTreeList for XtraGrid controls licensed from Developer Express, Inc. All other brand names, product names, or trademarks belong to their respective holders. GOVERNMENT USE Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in FAR (Commercial Computer Software-Restricted Rights) and DFAR (Rights in Technical Data and Computer Software), as applicable

4

5 Contents Introduction ix Chapter 1: Basic View Creation Lesson: Drawing Creation Environment Overview About Creating Drawings Creating Drawings About the Drawing Creation Environment Location of Interface Tools in the Drawing Creation Environment Using the Drawing Environment Exercise: Use the Drawing Creation Environment Lesson: Base and Projected Views Overview Creating Base Views Creating Projected Views Properties of Editing Base and Projected Views Exercise: Create and Edit Base and Projected Views Lesson: Section Views Overview Creating Section Views Editing Section Views Properties of Assembly Section Views Exercise: Create and Edit Section Views Lesson: Detail Views Overview Creating Detail Views Moving and Editing Detail Views Exercise: Create and Edit Detail Views Lesson: Broken Views Overview About Broken Views Creating Broken Views Editing, Relocating and Shortening Broken Views Exercise: Create and Edit Broken Views v

6 Lesson: Managing Views Overview About View Organization About Moving, Aligning, and Editing Views Moving, Aligning, and Editing Views About Line Visibility Controlling Line Visibility in Drawings Exercise: Manage Views Chapter Summary Chapter 2: Dimensions, Annotations, and Tables Lesson: Automated Dimensioning Techniques Overview About Automatically Placed Dimensions Retrieving Model Dimensions Editing Model Dimensions Exercise: Dimension a Drawing View Lesson: Manual Dimensioning Techniques Overview About General, Baseline, and Ordinate Dimensioning Creating General Dimensions Creating Baseline Dimensions Creating Ordinate Dimensions Exercise: Create General Dimensions Exercise: Create Baseline Dimensions Exercise: Create Ordinate Dimensions Lesson: Hole and Thread Notes Overview About Hole and Thread Notes Adding Hole and Thread Notes Editing Hole and Thread Notes Creating and Editing Hole Notes Exercise: Create and Edit Holes Notes Lesson: Hole Tables Overview About Hole Tables Hole Tables Editing Hole Tables Creating and Editing Hole Tables Exercise: Create and Edit Hole Tables Lesson: Creating Centerlines, Symbols, and Leaders Overview About Centerlines and Center Marks Creating Centerlines and Center Marks About Symbols Documenting Views with Symbols About Leaders and Text Adding Leaders and Text Editing Leaders and Text Exercise: Add Centerlines, Center Marks, and Symbols vi Contents

7 Lesson: Creating Tables Overview About Revision Tables and Tags Properties of Revision Tables and Tags Creating Revision Tables and Tags About Tables Table Properties Creating and Editing Tables Exercise: Create Revision Tables, Tags and Custom Tables Chapter Summary Chapter 3: Drawing Standards and Resources Lesson: Setting Drawing Standards Overview About Styles Creating Styles with the Style Editor About Drawing Standards Properties of Drawing Standards Defining the Active Style Using Layers Exercise: Set Drawing Standards Lesson: Drawing Resources Overview About Drawing Sheets Creating Sheets About Custom Borders and Title Blocks Creating Custom Borders Creating Custom Title Blocks Exercise: Use Drawing Resources Exercise: Customize a Title Block Chapter Summary Appendix A: Additional Resources Courseware from Autodesk Autodesk Authorized Training Centers Autodesk Certification Autodesk Consulting Autodesk Developer Network Product Support Contents vii

8 viii Contents

9 Introduction Welcome to the Autodesk Inventor 11 Creating Production-Ready Drawings Autodesk Official Training Courseware (AOTC), a training course for use in Authorized Training Center (ATC ) locations, corporate training settings, and other classroom settings. Although this courseware is designed for instructor-led courses, you can also use it for self-paced learning. The courseware encourages self-learning through the use of the Autodesk Inventor Help system. This introduction covers the following topics: Course objectives Prerequisites Using this courseware CD contents Completing the exercises Installing the exercise data files from the CD Projects Notes, tips, and warnings Feedback This courseware is complementary to the software documentation. For detailed explanations of features and functionality, refer to the Help in the software. Course Objectives After completing this course, you will be able to: Use the main interface components in the drawing environment related to creating productionready drawings, and create and edit the views required for effective and complete design drawings. Dimension and annotate your drawings, add hole and thread notes, and tables to your drawings, and create centerlines, symbols and leaders. Describe the drawing resources that are available and set drawing standards within the drawing environment. ix

10 Prerequisites This course is designed for new Autodesk Inventor users. It is recommended that you have: Completed the Autodesk Inventor 11 Introduction to 3D Design course, or an equivalent understanding of the Autodesk Inventor 11 user interface. A basic understanding of mechanical drafting or design. A working knowledge of Microsoft Windows 2000 or Microsoft Windows XP. Using This Courseware The lessons are independent of each other. However, it is recommended that you complete these lessons in the order that they are presented unless you are familiar with the concepts and functionality described in those lessons. Each chapter contains: Lessons Usually two or more lessons in each chapter. Exercises Practical, real-world examples for you to practice, using the functionality you have just learned. Each exercise contains step-by-step procedures and graphics to help you complete the exercise successfully. CD Contents The CD attached to the back cover of this book contains all the data and drawings you need to complete the exercises in this course. Completing the Exercises You can complete the exercise in two ways: using the book or online. Using the book Follow the step-by-step exercises in the book. Online Click the Autodesk Inventor 11 Creating Production-Ready Drawings AOTC icon on your desktop, installed from the CD, and follow the step-by-step exercises online. The online exercises are the same as those in the book. The online version has the advantage that you can concentrate on the screen without having to glance down at your book. x Introduction

11 After launching the online exercises, you might need to alter the size of your application to align both windows. Installing the Exercise Data Files from the CD To install the data files for the exercises: 1. Insert the courseware CD. 2. When the setup wizard begins, follow the instructions on screen to install the data. 3. If the wizard does not start automatically, browse to the root directory of the CD and double-click Setup.exe. Unless you specify a different folder, the exercise files are installed in the following folder: C:\Documents and Settings\All Users\Autodesk Learning\Inventor 11\ Creating Production-Ready Drawings After you install the data from the CD, this folder contains all the files necessary to complete each exercise in this course. You can also use the Autodesk Learning shortcut on your desktop to quickly access the datasets for each AOTC course on your system. Introduction xi

12 Projects Most engineers work on several projects at a time, and each project might consist of a number of files. You can use Autodesk Inventor projects to organize related files and maintain links between files. This courseware has a project file that stores the paths to all the files related to the exercises. When you open a file, Autodesk Inventor uses the paths in the current project file to locate other required files. To work on a different project, you make a new project active in the Project Editor. Follow the instructions in the courseware to locate the project file for the course and make it active. Use the following the instructions to locate the Creating Production-Ready Drawings project file for this courseware and make it active. 1. Start Autodesk Inventor. 2. If the Autodesk Inventor Launchpad does not appear, click File menu > Getting Started. 3. In the Launchpad, under What To Do, click Projects. A project helps you manage files for this courseware. 4. At the bottom of the Open dialog box, click Browse. Browse to C:\Documents and Settings\All Users\Autodesk Learning\Inventor 11\ Creating Production-Ready Drawings. Click Creating Production-Ready Drawings.ipj. Click Open. xii Introduction

13 Notes, Tips, and Warnings Throughout this courseware, notes, tips, and warnings are called out for special attention. Notes contain guidelines, constraints, and other explanatory information. Tips provide information to enhance your productivity. Warnings provide information about actions that might result in the loss of data, system failures, or other serious consequences. Feedback We always welcome feedback on Autodesk Official Training Courseware. After completing this course, if you have suggestions for improvements or if you want to report an error in the book or on the CD, please send your comments to Introduction xiii