Technical Data Pack: Dollaro Faux Leather

Transcription

1

2 Technical Data Pack: Dollaro Faux Leather Page 1: Working with Yarwood Leather Page 2: Range Information Page 3: Colour Offering Page 4: Technical Information Page 5: Fire Certification: Cigarette and Match Page 6: Fire Certification: Crib 5 Page 7: Care Information

3 Working with Yarwood Leather We look forward to working with you as your leather supplier, here are the main advantages of working with us: Yarwood provides a wide range of leather and faux leather ranges which are suitable for the domestic, aviation, automotive, contract and office upholstery sectors. Yarwood has its own Tannery & Finishing Plant based in Italy, giving us total control of production & matching services. This also allows us to trace all of our hides from source to distribution. Both Yarwood Leather and our Italian Tannery are accredited to ISO9001. All of our leathers are tested in our on-site laboratory, testing includes flex, rub, colour and abrasion. As well as supplying leather, we offer a cutting service which allows you to save time and money by having your leather order delivered as cut parts. Additionally, we also offer a sewing service, once again allowing you to save money by having your leather cut and sewn ready for assembly. If you require any samples of our ranges please contact the Sales Office: T: E: enquiries@yarwoodleather.com

4 Range Information The Dollaro faux leather range starts with the high-performance base layer, a textile material that has strength and durability throughout. The base layer has great torsional stability resulting in very high tear strength; our special process also makes it much less susceptible to edge fraying and stitch hole tears. Finally, the top coat is treated with our SanitizedTM anti-bacterial process to ensure that the surface is as inhospitable as possible to bacteria. The Dollaro faux range is available in a wide range of colours making it the consistent choice in synthetic leathers, which is suitable for all upholstery applications. Featured Projects

5 Colour Offering White Stone Ivory Biscuit Taupe Fudge V DOLL08 V DOLL05 V DOLL29 V DOLL04 V DOLL28 V DOLL30 Tan Rust Chestnut Bronze Brown Yellow V DOLL31 V DOLL20 V DOLL10 V DOLL48 V DOLL02 V DOLL07 Mustard Pumpkin Orange Salsa Red Deep Red V DOLL32 V DOLL33 V DOLL09 V DOLL34 V DOLL19 V DOLL49 Wine Burgundy Plum Pink Lavender Amethyst V DOLL21 V DOLL22 V DOLL35 V DOLL12 V DOLL14 V DOLL36 Mulberry Lime Green Apple Green Olive Soft Jade Green V DOLL37 V DOLL06 V DOLL38 V DOLL39 V DOLL40 V DOLL11 Teal Light Blue Azure Marine Blue Royal Blue Blue V DOLL41 V DOLL18 V DOLL42 V DOLL25 V DOLL13 V DOLL24 Dark Blue Gold Silver Platinum Seal Grey Fossil V DOLL26 V DOLL50 V DOLL51 V DOLL43 V DOLL44 V DOLL45 Coyote Gunmetal Pewter Dark Brown Anthracite Black V DOLL46 V DOLL47 V DOLL52 V DOLL03 V DOLL23 V DOLL01

6 Technical Information Application Usage Wear Tests Test Units Warp Weft Method Tensile Strength N EN ISO UNE-EN ISO 1421 Tear Resistance N EN ISO Seam Slippage Resistance mm EN ISO : 2004 Peeling Resistance Grade 5 5 EN ISO : 2000 Flex Endurance No. of Flexes >100,000 >100,000 ISO 7854: 1995 Abrasion Resistance No. of Cycles >45,000 >45,000 EN ISO y2: 1999 Bagging / Poaching mm NF G Fastness to Light Grade EN ISO 105 B02 Colour Fastness to Rubbing Wet Rubs EN ISO 105 X 12 Colour Fastness to Rubbing Dry Rubs EN ISO 105 X 12 Staining and Cleaning Tests Test Substance Orange Juice Coffee Wine Oil When Cleaned with Detergent When Cleaned with Alcohol Material Characteristics Weight Thickness Width Textile Synthetic g/m mm cm 15+5 % % - 100% PE 100% PVC Flammability Tests Test Method Assessment of Ignitability of Upholstered Furniture UNE - EN 1021: 1y2 UNE IR Assessment of Ignitability of Upholstered Furniture BS 5852 Crib 5 Smouldering cigarette UNE IR Butane flame equivalent to match flame

7 Client: Nepshaw Lane South, Morley, Leeds, LS27 7JQ Materials Testing Manager: D. J. Brockbank t: e: Entry No: Date received: 12/02/2016 TEST REPORT Yarwood Leather Ltd Treefield Industrial Estate Gelderd Road Gildersome Leeds LS277JU Client s Description: Sample of fabric: Carlton and Dollara Test Required: Pre-treatment: Conditioning: Flammability in accordance with The Furniture and Furnishings (Fire) (Safety) Regulations 1988 and Amendments Schedule 4 Part I and Schedule 5 Part I None Date Tests Completed: 17/02/2016 Method of Test: BS 5852: Part 1: 1979 A minimum of 96 hours at 50+/-20% Relative Humidity, 20+/-5 C The following test results relate only to the ignitability of the combination of materials under the particular conditions of test; they are not intended as a means of assessing the full potential fire hazard of the materials in use. Ignition Source Observations Result 0 (cigarette) No flaming or progressive smouldering was observed within one hour of PASS placement of the cigarettes. 1 (butane flame) Flaming ceased within the specified two minute period after removal of the butane and no progressive smouldering occurred. PASS Note: Comments A kg/m3 non fire retardant polyurethane foam was used as the filling for the tests. On the basis of the tests carried out this sample of fabric meets the requirements of Schedule 4 Part I and Schedule 5 Part I End of Document This is hereby certified to be a correct return of the tests made of the items referred to herein Dale Brockbank Materials Testing Manager 17 February 2016 Unless instructed otherwise by the client sample remnants will be disposed of after 28 days. Opinions and interpretations expressed herein are outside the scope of UKAS accreditation. Uncertainty budgets for test methods contained within this report are available on request. This Certificate relates only to the sample received and, unless that sample has been drawn by the staff of this laboratory, or its agent, and endorsed accordingly, any application of the result to a bulk quantity or other material is entirely the responsibility of the client. Page 1 of 1

8

9 Cleaning & Care Advice Care Information 1. Remove abrasive material The biggest enemy to a piece of upholstery is the build-up of material on the surface of the vinyl. If material is allowed to build up, when you move against the surface of the vinyl instead of only rubbing fabric material against the surface, the fabric grabs any free material and rubs said material under force and pressure against the surface of the vinyl. This can cause severe abrasion of the surface. We recommend vacumming the vinyl, as this removes the dirt particles and prevents them abrading against the surface of the vinyl. Dusting with a cloth is also a suitable process. 2. What to do with wet stains a. The simple answer is to simply remove any excess liquid or puddles with a damp lint free cloth (such as a Yarwood Leather cleaning cloth). b. DO NOT use household cleaning products, anything with a solvent base will solubilize the finish and damage the vinyl. c. For watery or oily stains, absorb with a paper-like tissue or an absorbing tissue until it is completely absorbed. For fat or ball-pen stains, clean with an absorbent tissue soaked in a warm, soapy water.

10