ISO 29990:2010 Standards

Transcription

1 07-10 November 2016 Kampala, Uganda 24-MAR-16 This course is Designed, Developed, and will be Delivered under ISO 29990:2010 Standards

2 Why Choose this Course? What are the Goals? This training course provides the concepts for soil mechanics and the soil investigation tests on site as well as the borehole, standard penetration and cone penetration tests. The tests will be illustrated through videos and technical practice for the solution of the soil with problems. The training course will then explore how the data obtained from the geotechnical investigation can be evaluated and defined. The training course will cover the techniues of soil test and geotechnical investigation in general, with specific focus on geotechnical investigation of offshore structures. It will also assist participants in defining scope of work for geotechnical study. The methods of laboratory and site tests will be presented during the course theoretically and through videos. Who is this Course for? The design of the offshore structure pile and the soil structure interaction will be defined in detail. The construction of offshore structure and specifically the pile will be discussed with the main problems. The derivability analysis will be covered during the training course and also the design of the mudmat. The pile capacity for aging structure will be addressed in the training course and also the scour problem and new ways to overcome it. The effects of the settlement on the facilities will be discussed during the course. This training course is suitable to a wide range of professionals but will greatly benefit: Structural Engineers Civil/Construction Engineers Project Engineers Engineering Managers How will this be Presented? This training course will feature: Soil investigation for offshore structure The soil structure interaction for offshore platform The deliverability analysis for pile foundation Offshore pile capacity calculation Offshore pile construction Mudmat design and stability calculation This training course will utilise a variety of proven adult learning techniues to ensure maximum understanding, comprehension and retention of the information presented. The daily workshops will be highly interactive and participative. The illustration will depend on videos and photos. QUALITY CERTIFICATION PetroKnowledge utilises a Quality Management System which covers technical, administrative and commercial aspects of its business operations. It was designed in accordance with the principles of ISO 9001:2008 uality standard. PetroKnowledge has acuired the ISO 29990:2010 international standard which ensures that the design, development, and delivery of the learning service meet the ISO reuirements. This uality mark ensures excellence of our training courses.

3 Daily Topics Day One Introduction to Soil Mechanics know the concept of soil investigation for offshore structure. Introduction of formation of different offshore soils Cyclic effect of the marine soils Include other tests like: Tria axial test, direct shear tests etc. Impact of carbonate contents on soil behavior to be included Understand the soil investigation Understand the soil test and the reuirements Understand the main concept of offshore structure design Soil structure interaction behaviour Performing an Offshore Soil Investigation Bore hole specification and reuirements CPT SPT Vane shear test Settlement Oedometer test Drilling Euipment and Method Wire-Line Sampling Techniue General Design Considerations Basics design of fixed offshore platforms Topside load calculation and environment load factors in ISO Example of load calculation in different codes ISO 19902, AISC LRFD,EC3, BS5950 Platform optimum configuration Jacket framing pattern Calculation of forces in a tubular member Load calculation on the pile Soil structure interaction Day Two Pile Design know the concept of pile design. Understand the pile design soil investigation Understand the effect of cyclic loading Understand the pile capacity calculation for offshore structure design Understand pile calculation based on API RP2A P-y, t-z and Q-Z curves concepts to be included Include drilled and grouted piles concepts and analysis Uplift capacity of the pile concepts Concept of steel Pile design Offshore Site Investigation Geotechnical Engineering for offshore structure Offshore Piles design philosophy Parameters of soil mechanics Basics of Earthuake and Seismic Analysis with API approach Axial Pile Performance Pile Capacity Calculation Methods Pile Capacity under Cyclic Loadings Fundamental Concepts and Case Studies for Laterally Loaded Piles Design of Pile Foundations for Axial Loading Calculation for estimating pile load Calculate the capacity of the pile Design Pile Stresses Pile calculation based on API RP2A Geotechnical Investigation

4 Daily Topics Day Three Pile Derivability know the pile deliverability. Understand the pile stresses due to hammer Understand the pile deliverability s Understand the pile wave euation Understand pile installation Stresses Due to Hammer Effect Minimum Wall Thickness Driving Shoe and Head Pile Section Lengths Pile drivability analysis Example of pile drivability analysis Evaluation of Soil Resistance to Driving (SRD) Unit Shaft Resistance and Unit End Bearing for Uncemented Materials Upper- and Lower-Bound SRD Results of Wave Euation Analyses Results of Drivability Calculations Recommendations for Pile Installation Day Four Mudmat and Stability Design know the mudmat design and stability deliverability. Understand the scour problem Understand the mudmat design principal Understand the pile construction Understand geotechnical in SACS software Scour problem Example for calculation pile axial capacity from soil report Mud mat design Example of mudmat calculation On bottom stability analysis The data to receive from the geotechnical report Piles construction Proudly associated with: Geotechnical Investigation

5 Please use BLOCK CAPITALS to fill in this form. It is important that you read carefully through all information before starting to complete the form. REGISTRATION DETAILS Family Name First Name (Mr./Ms.) Position Company Mailing Address... Telephone Fax AUTHORISATION Mobile Authorised by Position Mailing Address... Telephone Fax Mobile COURSE SCHEDULE November 2016 Kampala, Uganda REGISTRATION FEES US$ 4,950/ - per participant This fee is inclusive of Documentation, Lunch and Refreshments MODE OF PAYMENT Please invoice my company Please invoice me Cheue payable to PetroKnowledge Limited WAYS TO REGISTER T: F: E: info@petroknowledge.com W: HOTEL ACCOMMODATION Hotel accommodation is not included in the Registration Fee. A reduced corporate rate and a limited number of rooms are available for attendees wishing to stay at the hotel venue. Please make your reuest for accommodation at least 3 weeks prior to the commencement of the course. CERTIFICATION A Certificate of Completion will only be awarded to those delegates who attend the entire course Training & Development Services for the Oil & Gas Industry PetroKnowledge Limited P. O. Box Abu Dhabi, U.A.E. CANCELLATIONS & SUBSTITUTIONS You must notify the Registrar of cancellations at least 2 weeks before a scheduled seminar in order to be eligible for a credit. If you cannot attend, you may send a replacement from your organisation at no charge. There is a $250 handling charge for all cancellations or rescheduling. We reserve the right to cancel a seminar due to low enrolment. All registrants will be notified in advance and a full refund will be provided upon reuest. DISCLAIMER Circumstances beyond the control of PetroKnowledge may necessitate postponement, change of venue or substitution of the Instructor. As such, PetroKnowledge reserves the right to implement such amendments.