Mohammad Asjad (PhD, IITD)

Size: px

Start display at page:

Download "Mohammad Asjad (PhD, IITD)"

Arabella Mitchell
5 years ago
Views:

1 Mohammad Asjad (PhD, IITD) Assistant Professor Department of Mechanical Engineering Faculty of Engineering and Technology Jamia Millia Islamia, New Delhi, Mohammad Asjad is currently an Assistant Professor with the Discipline of Mechanical Engineering at Jamia Millia Islamia, New Delhi. He is associated with Industrial Engineering Research Group of the Department, since 10 th January, He graduated in Mechanical Engineering from Z.H.C.E.T (AMU, Aligarh) and later did his Masters in Industrial and Production Engineering from Z.H.C.E.T (AMU, Aligarh) and securing first position in both of them. Subsequently, he completed his Ph.D. in the area of Maintenance engineering from Indian Institute of Technology Delhi (IITD) under the supervision of Prof. O.P. Gandhi and Prof. M. S. Kulkarni. He also receipts the scholarships during Master and Research at A.M.U and IIT Delhi, respectively. His research interests are: Strategic Asset Management, Reliability Engineering, Maintenance Management, Manufacturing Operations Planning, Life Cycle Costing, Soft computing and Applied Artificial Intelligence. He has published several research articles at various national and international journals and conferences of repute. He is also on the panel of Editorial board and reviewer for various reputed international journals and conferences. 1

2 Awards/Recognition/Scholarships Institute Scholarship for pursuing Ph.D. at IIT Delhi. University Gold Medal for Master of Technology, GATE Scholarship during Master of Technology. University Gold Medal for Bachelor of Engineering, Anjuman-E-Farz-E-Momin award, Bareilly, U.P., India. Computer/Software Proficiency Reliability, Maintenance Maintainability and LCC software: Reliasoft, Relex, GoldSim and Vensim. Analysis: MATLAB (Mathematical programming language and optimization) Simulation: ARENA, GPSS-PC Optimization: Maple (Mathematical calculation, analysis, optimization, simulation) Statistical Analysis: MINITAB, SPSS, Statistica, XLSTAT. Artificial Intelligence: Fuzzy, Genetic Algorithm, Neuro Intelligent, Alyuda, Easy NN and Tiberuis. Courses Teaching/Taught Reliability Engineering Operations Research Optimization Methods Foundry Technology Production Technology Modern Manufacturing Methods Workshop Practices Research/Dissertation/Project Guidance Ph.D. (Three as a Main Supervisor and Three as a Co-Supervisor) M. Tech. (Six completed and Two ongoing) B. Tech./B.E. (Eight completed) 2

3 Research Collaborations Delhi Technological University, Delhi; Aligarh Muslim University, Aligarh; Inter university accelerator centre, Delhi; Sam Ratulangi University, Manado, North Sulawesi, Indonesia. Reviewer International Journal of System Assurance and Engineering Management, Springer; Benchmarking: An International, Emerald; International Journal of Modelling in Operations Management, Inderscience; Cogent Engineering, Taylor and Francis; Journal of the Institution of Engineers (India): Series C, Springer; Journal of Engineering Design and Technology, Emerald; International Journal of Operations Research, Inderscience; Journal of Facilities Management, Emerald; International Journal of Process Management and Benchmarking, Inderscience. Member of the Editor board International Journal of Performability Engineering. International Journal of Engineering and Industries. Work Experience/ Lecture Series Organized/Industrial Training/Seminar/Workshop/Conference Attended Since, 10 th Jan 2011, working as an Assistant Professor in the Department of Mechanical Engineering, Jamia Millia Islamia, New Delhi. More than three years as Teaching Assistant at Industrial Tribology, Machine Dynamics and Maintenance Engineering Centre (ITMMEC), IIT Delhi (01 st January 2008 to 09 th January 2011). Worked as a Guest Faculty in the Department of Mechanical Engineering, AMU, Aligarh from 30 th Nov, 2007 to 28 th Dec, Worked as a Guest Faculty in Mechanical Engineering Section, University Polytechnic, AMU, Aligarh, from 06 th Dec, 2006 to 15 th May,

4 Worked on a joint research project between IIT Delhi and Burckhardt Compression Ltd., Pune, India. Member of Committee for up-gradation of the PG website at IIT Delhi. Member of Departmental Committee for NAAC. Incharge, Material Science Lab., Department of Mechanical. Engineering, Jamia Millia Islamia, New Delhi. Involved in various Departmental activities, such as preparation of Annual Report, Plan Proposal, etc. Attendance and Sessional Mark Incharge for B.Tech/B.E/M.Tech. Actively participated in M. Tech. re-structuring. Assistant Superintendent, Verification and Identification officer in admission process for B. Tech./B.E./M.Tech. and PhD at JMI, New Delhi. Coding officer of B. Tech./M. Tech./B.E for University Exam at JMI, New Delhi. Tabulator/Verifier of B. Tech./M. Tech./B.E for University Exam at JMI, New Delhi. Appointed to serve as a designated reviewer on the technical program committee for ICEBU Member of the Technical Program Committee of nd International Conference on Management Science and Engineering [MSE2016], 16 th -18 th December 2016, Chengdu, China. Member of the Technical Program Committee of 2 nd International Conference on Modern Management [MM2016], 11 th -13 th November 2016, Wuhen, Hubei, China. Member of the Advisory Committee of Modern Research In Aerospace Engineering- 2016, September, 2016, Amity Institute of Aerospace Engineering, Amity University Uttar Pradesh, India. Invited Lecture on Maintenance Issues for manufacturing systems under Faculty Development Program, Azad Engineering College, Lucknow 14 th January Invited Lecture on Supportability Issues for mechanical systems under Faculty Development Program, Azad Engineering College, Lucknow 14 th January Member of the Technical Program Committee of 2015 International Conference on Management Science and Engineering [MSE2015], 25 th -27 th December 2015, Chengdu, China. Member of the Technical Program Committee of International Conference on Mechanics& Applied Physics [ICMAPH 2015], 05 th -07 th November 2015, Rome, Italy. 4

5 Member of the Technical Program Committee of International Conference on Modern Management [MM2015], 26 th -28 th June 2015, Guilin, Guangxi, China. Appointed to serve as a designated reviewer on the technical program committee for ICCME Appointed to serve as a designated reviewer on the technical program committee for ADMMET'2015. Attended 2-Week Faculty development program on Mechatronics & Robotics in Manufacturing Industries, from 27 th Feb to 12 th March 2015 at Department of Mechanical Engineering, JMI. Participated in 3 rd 3 week winter special school from 17 th December 2014 to 08 th January 2015 at UGC ASC JMI. Attended one week QIP course on Advances in solar energy from 09 th 15 th Dec 2014 IITD. Participated 108 th Orientation program from 9 th April, 2014 to 9 th May 2014 at UGC ASC JMI. Attended National conference on Water Resources Management-Achievements & Challenges (WRM-A&C) 22 rd March 2014 at Department of Mechanical Engineering, JMI. Participated in National conference RAMCE-2014 on th April 2014 at AKGEC, Ghaziabad, U.P., India. Participated and presented the research work carried out in Open House at IIT Delhi on 20 th April Poster presented on research work at National Science day function at IIT Delhi, on 27 Feb, Participated and paper presented at IME, in International conference on Business Cases Organized one day lecture series EXPLORER 2009 at IIT Delhi on the theme of Industry-Academia-Research interaction. Participated and paper presented in a conference at Institute of Engineers, Delhi State Chapter, Attended three days workshop on Entrepreneurship at University Polytechnic, AMU, Aligarh. 5

6 Papers published in National(s)/International(s)/Conference(s)/Journal(s)/Magazine 1. Throughput prediction of seven station unpaced production line using ANN, Recent trend and Innovation in Mechanical Engineering, D C E T Hyderabad, 5-6 March A comparison between DA and ANN technique for lift index classification, International Ergonomics Conference, Human Work and Work Environment (HWWE-2007),10-12 December 2007, Central Institute of Agricultural Engineering, Bhopal, India. 3. Prediction of make-span performance of FMS using ANN modeling, International conference on recent development in mechanical engineering, ICRDME-2008, Jan 2008, Saheed Uddham Singh College of Engineering and Technology, Tangori (Mohali), Punjab, India. 4. Development of e-maintenance: A way of maintenance in present scenario, Institute of Engineers, Delhi State Chapter, th May, Supportability: A way of enhancing the performance, Published in Explorers Magazine, IIT Delhi, Contract alternatives for maintenance supportability of mechanical systems, International conference on Business Cases-2010, at IME Sahibabad, U.P., India, 2-3 December Some studies on recent advancements in welding, National conference on recent advances in Mechanical and Civil Engineering (RAMCE-2014), ISSN: , pp Comparison of Vibrating and Non-vibrating Manufacturing unit worker s using semg signals on CTS, National conference on Mechanical Engineering Ideas, Innovations and Initiatives (NCMEI3-2016), at AMU Aligarh, ISBN: , PP A review of ergonomic aspects of hearing impairment in humans in different environments, International Conference on Innovative Product Design & Development (ICIPROD-2017), 20 April 2017, Al-Falah University, Dhauj, Faridabad. 10. Lean Waste Classification Model to Support the Sustainable Operational Practices, 1 st International Conference on Industrial and System Engineering 2017 (IConISE 2017), August 2017, Bali, Indonesia. 11. Effect of noise-induced stress on bus drivers of Faridabad (India), Human Work and Work Environment (HWWE-2017), 8 to 10 December 2017, A.M.U, Aligarh. 6

7 12. Effect of anthropometry factors on the industrial system design and maintenance a state of art, Human Work and Work Environment (HWWE-2017), 8 to 10 December 2017, A.M.U, Aligarh. 13. Hybridization of Entropy and Taguchi Loss Function for Accessing Waste Risk in Modified FMEA, IEEE International Conference on Industrial Engineering and Engineering Management (IEEM2017), 10 to 13 December 2017, Singapore. 14. Integrating AHP and Taguchi Loss Function into FMEA for Evaluating Operational Risks in Disaster Response Supply Chain, 1st Asia Pacific Conference on Research in Industrial and Systems Engineering 2018 (APCoRISE 2018), 18 April 2018, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia. 15. A conceptual framework for analyzing, improving and optimizing supportability of mechanical systems, Int. J. of Strategic Engineering Asset Management 1.2 (2012): Supportability based contract alternatives for operating life of mechanical systems, Int. J. of Indian Culture and Business Management 6.1 (2013): Opportunistic Actions for Subassemblies of a Reciprocating Compressor: An LCC-based Approach, Int. J. of Performability Engineering, 9.3 (2013): Life Cycle Cost based O&M support for mechanical systems, Int. J. of System Assurance and Engineering Management, 4.2 (2013): A conceptual framework for capturing the supportability attributes of a mechanical system, Int. J. of Service and Operations Management, 17.1 (2014): Supportability Perspectives: Current Practices and Potential Area for Future Research, Int. J. of Industrial and Systems Engineering, 17.2 (2014): Comparison of operators computing efficiency with special reference to readability with different viewing angles on a desktop, J. of Industrial Engineering International, 11.1(2015): Review of modern optimization techniques, Int. J. of Engineering Research & Technology, 4.4(2015): An insight to availability for O&M support of mechanical systems, Int. J. of Productivity and Quality Management, 16.4 (2015):

8 24. Optimal support strategy for mechanical systems under contract realm, Benchmarking: An international Journal, 22.7 (2015): Supportability issues for mechanical systems for their useful life, Journal of Engineering, Design and Technology, 14.1 (2016): Parametric optimization of organic rankine cycle for power generation from low grade waste heat, Int. Journal of Sustainable Energy, (2016): 774: Some investigations on Low Back Pain Amongst Workers Involved in Lifting Tasks, International Journal of Procurement Management, 9.6 (2016): Friction Stir welds of Al alloy-cu: An investigation on effect of plunge depth, Archive of Mechanical Engineering, 63.4 (2016): A Review of Ergonomic Aspects of Hearing Impairment of Humans in Different Environments, International Journal of Scientific & Engineering Research, 8.7 (2017): Analysis of maintenance cost for an asset using the Genetic Algorithm, Int. J. of System Assurance and Engineering Management, 8.2 (2017): Grey relational analysis coupled with principal component analysis for optimization of the cyclic parameters of a solar-driven organic Rankine cycle. Grey Systems: Theory and Application, 7.2 (2017): Some investigations on the relationship between ergonomic and TQM, Int. J. of Industrial and Systems Engineering, 27.2 (2017): Reconfigurable manufacturing systems: The Journey and road ahead, Accepted for publication, Int. J. of System Assurance and Engineering Management. 34. A comparative study of Classifier Techniques for Lift Index Data Analysis, Accepted for publication, Benchmarking: An international Journal. 35. Prioritization and selection of non-traditional machining processes and their criteria using analytic hierarchy process approach, Accepted for publication, International Journal of Process Management and Benchmarking. 36. Selection of optimal machining parameters using integrated MCDM approaches, Accepted for publication, International Journal of Advanced Operations Management. 8

9 37. Performance Evaluation of Solar Photovoltaic Electricity Generating Systems: An Indian perspective, communicated, Int. Journal of Sustainable Engineering. 38. An Improved Modified FMEA Model for Prioritization of Lean Waste Risk, communicated, Int. Journal of Lean Six Sigma. 39. Fuzzy-based failure mode and effect analysis (FMEA) of solar photovoltaic (SPV) systems, communicated, International Journal of Reliability and Safety. 40. Reconfigurable Machine Tools: a perspective, communicated, International Journal of Advanced Operations Management. 41. Classification of key elements of electrical power generation utilizing solar energy using ISM technique and MICMAC analysis, communicated, Clean Technologies and Environmental Policy. 42. Effects of Feed Force and Exposure Duration on Operators Performing Tool Grinding Task, Under Preparation. 43. Failure Mode and Effect Analysis (FMEA) for service quality improvement: A current state of art and directions for future research, Under Preparation. Place: New Delhi Dated: Feb 21, 2018 (Mohammad Asjad) 9

Saman Ahmad. 4/1476 Jamia Urdu Road, Dodhpur, Aligarh

Saman Ahmad. 4/1476 Jamia Urdu Road, Dodhpur, Aligarh Saman Ahmad 4/1476 Jamia Urdu Road, Dodhpur, Aligarh-202002 Email: saman.ahmad@yahoo.co.in Academic Qualifications: MSc. In Thermal Engineering- 1 st Division Awarded by Z.H. College of Engineering and