China Resources Wandong Medical Equipment Co., Ltd. High Frequency 50kW, 150kV Radiography System - HF50-R

Transcription

1 China Resources Wandong Medical Equipment Co., Ltd. High Frequency 50kW, 150kV Radiography System - HF50-R Building 3, No.9, Jiuxianqiaodong Road, Chaoyang District, Beijing , P.R. China international@wandong.com.cn Tel/Fax: /3/5, Page 1 of 7

2 WDM: A successful journey of 60 years China Resources Wandong Medical Equipment Co., Ltd. (WANDONG, originally Beijing Wandong Medical Equipment Co., Ltd.) was established in 1955, and has been listed on the Shanghai Stock Exchange since Headquartering in High-Tech industrial park in Beijing, Wandong occupies an area of more than 100,000 square meters as its modern production base and R&D center, and has 30+ branches in China and a wide sales and service network in about 70 countries all over the world. With the 60 years dedication to the medical imaging, Wandong has made brand name of WDM, a well-known brand in the world. As one of the largest radiology imaging equipment manufacturers in the world, Wandong has wide range of product lines including General Radiography, Mobile X-ray & C-arm, Digital Radiography (DR), Digital Fluoroscopy (DRF), Digital Mammography, Cath-Lab, Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) machine, and the annual production capability is more than 6,000 units. Page 2 of 7

3 Performance feature: 1) Excellent High-frequency Generator High-frequency generator output is stable and precise. System effectively reduced radiation to patient by much lower scattering dose than traditional machine Transient exposure eliminates motion artifacts. APR (Anatomical Program Radiography) of more than 600 set exposure programs can meet all clinical requirements. (5 kinds of body size, 30 anatomical positions, 4 projection directions) 2) Humanization Design Console Fast and reliable operation guaranteed by soft touch buttons and LCD display of parameters. Categorized buttons in control panel match with doctor s operation procedure. Variety of console installation including wall-hanging, pedestal table, desktop placed fits for different site requirements. Operation fatigue will be reduced by ergonomic design. 3) Integrated Radiography table The wide range of movement of Stand and radiography table to ensure patient to be covered the whole body by X-ray tube, To fully meet the lateral position oblique position and the head of table and requirement of special position. Stand rotation makes stretcher patients to do diagnostic without moving. Page 3 of 7

4 1. Configurations: Standard Configurations: No. Component Part Number Brand Quantity 1 High Frequency Generator GFS501-1 WDM 1 2 X-ray Tube Assembly E7843X Toshiba 1 3 HV cable DL7512-1B WDM 1 4 Collimator XS1-2 WDM 1 5 Radiography Table SC4-4 WDM 1 6 Vertical Bucky Stand LS-3 WDM 1 Optional Configurations: No. Component Part Number Brand Quantity 1 Ionization Chamber SSMC610 3 fields Claymount 1 2 Radiography Table SC4-1 WDM 1 Page 4 of 7

5 2. Technical Specification: Standard configuration Component Specifications Part Number: GFS501-1 Power: 50kW Constant Frequency of Inverter: 25kHz KV Range: 40~150kV ma Range: 25~630mA High Frequency Generator Time Range: 2ms~5s mas:0.5mas~500mas AEC interface, APR Power Supply: 380VAC, three-phase Fault Auto Detection and Diagnosis Console: LCD Displays APR:600 positions Part Number: Toshiba E7843X X-ray Tube Assembly Focal Spot: 0.6mm/ 1.2mm Power: 22 / 50kW Anode Heat Capacity: 150kHU Collimator Target Angle: 12 Part Number: XS1-2 External Dimension: 250mm 224mm 250mm Projection Field(SID=65cm) Max: 35cm 35cm; Operation Mode: Manual Min: 0cm 0cm Page 5 of 7

6 Part Number: SC4-4 External Dimension(Length* Width*Height): 2000mm*740mm*658mm Tabletop Movement(Longitudinal):1200mm Tabletop Movement(Transverse): 200mm Longitudinal Travel of Tube Stand: 1200mm Vertical Travel: 810mm~1710mm (Distance from X-ray Tube Focus to The Floor) SID: 1100mm Max. (to Table Bucky) Rotation Range of X-ray Tube Around Horizontal Arm: +120 ~-120 Radiography Table Tube Stand Self-Rotation Range: +180 ~ -180, and the interval of 90 could be located. Tabletop Locking Mode: Electromagnetic lock, braking force 100N Tabletop Locking Control: foot switch Bucky Mode: Fixed Grid Size: 356mm 432mm(14 17 ) Bucky specification: f 0 =100cm, r=10, N=40L/cm Cassette Size: Max Distance between Tabletop and Bucky Film 65mm Longitudinal Travel of Bucky(SID): 640mm Weight Capacity: Max. 135 kg Part Number: LS-3 Vertical Bucky Stand Vertical Travel: 1000mm Maximum Dimension: Grid (According to User s Requirement): N=40L/cm; r=8, 10 or 12; f 0 =150cm, 180cm or 200cm Page 6 of 7

7 Optional Components Component Specifications Part Number: Claymount SSMC610 Ionization Chamber AEC function, 3 fields Exposure dose range:1~100ugy Exposure time range: 1ms~5s Part Number: SC4-1 External Dimension (Length* Width*Height): 2000mm*730mm*690mm Tabletop Movement(Longitudinal): 1200mm Tabletop movement(transverse): 200mm X-ray tube Stand Travel Range (Longitudinal): 580mm Rotation Range of X-ray Tube Around Horizontal Arm: +90 ~-90 Radiography table X-ray Tube Stand Self-Rotation Range: +180 ~-180, interval of 90 could be located. Distance from X-ray tube focus to the floor 1030mm~1740mm Tabletop Locking Mode: Electromagnetic lock, footswitch control, braking force 100N Gird: 388mmх464mm, f 0 : 100cm, r10, N40 L/cm Cassette Size: Max Distance between Tabletop and Bucky Film 80mm Bucky Longitudinal Travel: 580mm Bucky locking: Electromagnetic, braking force 100N Page 7 of 7