STANDARD NUMBER & LETTER SCHEMES
|
|
- Amanda Parker
- 5 years ago
- Views:
Transcription
1 RECESSED SIGNGE
2 RECESSED SIGNGE Signage is an important accessory for most assembly venues to communicate to the audience. Seat signage is useful for ticketing and crowd control, allowing you to uniquely identify each seat in your venue. SERIES Seating provides a range of standard signage options and finishes available, appropriate for the various seating styles and options that we offer. We always recommend the signage with greatest visual and legible contrast, but continue to offer a range of standard finishes to meet your project s finish requirements.
3 STNDRD NUMER & LETTER SCHEMES SCHEME 1 SCHEME 2 The SERIES standard and most widely accepted numbering & lettering schemes of auditorium seating are illustrated on pages 2 and 3. If you would like a customized numbering & lettering scheme, please provide us with an illustrated example and we ll implement it in our numbering & lettering drawings specifically for your project. We recommend NOT using the letters ( I ) and ( O ), as they tend to look like the numbers one ( 1 ) and ( 0 ). One Section Chairs One Section Chairs ISLE ISLE ISLE ISLE Two Section Chairs Two Section Chairs ISLE ISLE ISLE ISLE ISLE ISLE Three Section Chairs Three Section Chairs ISLE ISLE ISLE ISLE ISLE ISLE ISLE ISLE Four Section Chairs Four Section Chairs ISLE ISLE ISLE ISLE ISLE ISLE ISLE ISLE ISLE ISLE dditional Information dditional Information 2 3
4 RECESSED SIGNGE RECTNGULR NUMER SET PLTES SERIES Seating rectangular number seat plates has been designed to be installed on wood or plastic laminated seat edge panels. The concealed fastener seamless design makes it easy to install and difficult to tamper with. ll signage plates are protected with a transparent oven-baked epoxy coating. P32668 lack Plate Semi-matte Finish Engraved Silver Numbers. P32669 rushed Stainless Steel Plate Finish lack Numbers. P32670 rass Plate Finish lack Numbers. P32671 ronze Plate Finish lack Numbers. P32672 lack Numbers. SCLE 1:1 4 5
5 RECESSED SIGNGE RCETRCK NUMER SET PLTES SERIES Seating racetrack number seat plates has been designed to be installed on wood or plastic laminated seat edge panels. The concealed fastener seamless design makes it easy to install and difficult to tamper with. ll signage plates are protected with a transparent oven-baked epoxy coating. P32663 lack Plate Semi-matte Finish Engraved Silver Numbers. P32664 rushed Stainless Steel Plate Finish lack Numbers. P32665 rass Plate Finish lack Numbers. P32666 ronze Plate Finish lack Numbers. P32667 lack Numbers. SCLE 1:1 6 7
6 RECESSED MOUNT SIGNGE ROUND LETTER ISLE PLTES SERIES Seating round letter aisle plates has been designed to be installed on wood or plastic laminated aisle panels. The concealed fastener seamless design makes it easy to install and difficult to tamper with. ll signage plates are protected with a transparent oven-baked epoxy coating. P32327 lack Plate Semi-matte Finish Screen Painted White Letter. P32689 rushed Stainless Steel Plate Finish lack Letter. P32690 rass Plate Finish lack Letter. P32691 ronze Plate Finish lack Letter. P32692 lack Letter. SCLE 1:1 8 9
7 RECESSED SIGNGE ROUND D ISLE PLTES SERIES Seating round D aisle plates has been designed to be installed on wood or plastic laminated aisle panels. The concealed fastener seamless design makes it easy to install and difficult to tamper with. ll signage plates are protected with a transparent oven-baked epoxy coating. P32328 lack Plate Semi-matte Finish Screen Painted White D Symbol. P32722 rushed Stainless Steel Plate Finish lack D Symbol. P32723 rass Plate Finish lack D Symbol. P32724 ronze Plate Finish lack D Symbol. P32725 lack D Symbol. SCLE 1:
8 RECESSED MOUNT SIGNGE RECTNGULR LETTER ISLE PLTES SERIES Seating rectangular letter aisle plates has been designed to be installed on wood or plastic laminated aisle panels. The concealed fastener seamless design makes it easy to install and difficult to tamper with. ll signage plates are protected with a transparent oven-baked epoxy coating. P32698 lack Plate Semi-matte Finish Engraved Silver Letter. P32699 rushed Stainless Steel Plate Finish lack Letter. P32700 rass Plate Finish lack Letter. P32701 ronze Plate Finish lack Letter. P32702 lack Letter. SCLE 1:
9 RECESSED MOUNT SIGNGE RECTNGULR D ISLE PLTES SERIES Seating rectangular D aisle plates has been designed to be installed on wood or plastic laminated aisle panels. The concealed fastener seamless design makes it easy to install and difficult to tamper with. ll signage plates are protected with a transparent oven-baked epoxy coating. P32731 lack Plate Semi-matte Finish Engraved Silver D Symbol. P32732 rushed Stainless Steel Plate Finish lack D Symbol. P32733 rass Plate Finish lack D Symbol. P32734 ronze Plate Finish lack D Symbol. P32735 lack D Symbol. SCLE 1:
10 RECESSED MOUNT SIGNGE RECTNGULR DONOR PLTES SERIES Seating rectangular donor plates has been designed to be installed on wood or plastic laminated chair components. This rectangular donor plate can be provided with mounting holes and tamper proof screws or without mounting holes to be used with concealed fastener. This size donor plate was designed for the chair armrests. ll signage plates are protected with a transparent oven-baked epoxy coating. *ll donor plates will be provided blank, without engraving. P32766 lack Plate Semi-matte Finish Silver Letters No holes P32754 P32302 rushed Stainless Steel Plate Finish in-filled lack Letters No holes P31341 P32767 rass Plate Finish in-filled lack Letters No holes P32755 P32768 ronze Plate Finish in-filled lack Letters No holes P32756 P32769 in-filled lack Letters No holes P32757 SCLE 1:
11 RECESSED MOUNT SIGNGE RECTNGULR LG DONOR PLTES SERIES Seating rectangular LG donor plates has been designed to be installed on wood or plastic laminated chair components. This rectangular donor plate can be provided with mounting holes and tamper proof screws or without mounting holes to be used with concealed fastener. This size donor plate was designed for the chair outer back. ll signage plates are protected with a transparent oven-baked epoxy coating. *ll donor plates will be provided blank, without engraving. P32770 lack Plate Semi-matte Finish Silver Letters No holes P32758 P32771 rushed Stainless Steel Plate Finish in-filled lack Letters No holes P31344 P32772 rass Plate Finish in-filled lack Letters No holes P32759 P32773 ronze Plate Finish in-filled lack Letters No holes P32760 P32774 in-filled lack Letters No holes P32761 SCLE 1:
12 RECESSED MOUNT SIGNGE RECTNGULR SGL DONOR PLTES SERIES Seating rectangular SGL donor plates has been designed to be installed on wood or plastic laminated chair components. This rectangular donor plate can be provided with mounting holes and tamper proof screws or without mounting holes to be used with concealed fastener. This size donor plate was designed for the chair inner back when a reveal is present. ll signage plates are protected with a transparent oven-baked epoxy coating. *ll donor plates will be provided blank, without engraving. P32775 lack Plate Semi-matte Finish Silver Letters in-filled No holes P32762 P32776 rushed Stainless Steel Plate Finish in-filled lack Letters No holes P31347 P32777 rass Plate Finish in-filled lack Letters No holes P32763 P32778 ronze Plate Finish in-filled lack Letters No holes P32764 P32779 in-filled lack Letters No holes P32765 SCLE 1:
13 S E T I N G SERIES US Corporate Headquarters NE 30th venue Suite 901 Miami, FL P E info@seriesseating.com SERIESWORSHIPSETING.COM SERIESSETING.COM SERIES Colombia Carrera 7 Km. 21 Chía, Cundinamarca Código Postal P E info@seriesseating.com SERIESWORSHIPSETING.COM SERIESSETING.COM ISO SERIES Seating Printed in US by SERIES Printing on FSC certified paper CO240256
STANDARD NUMBER & LETTER SCHEMES
SURFCE SIGNGE SURFCE SIGNGE Signage is an important accessory for most assembly venues to communicate to the audience. Seat signage is useful for ticketing and crowd control, allowing you to uniquely identify
More information2CH610-BOB 2CH67-BOB 2CH65-BOB ø 60 cm
CICERONE ST.132-1ENG SPECIFICATION Range: Cicerone Design: Lorenzo Stano SMALL TABLES WITH POWDER COATED FRAME AND HPL TOP Ø 60 cm Code: 2CH610-BOB height 103,5 cm, base Ø 50 cm, top Ø 60 cm 2CH67-BOB
More information77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.)
ARCHIMEDE ST.102-4ENG SPECIFICATION Range: ARCHIMEDE Design: Caimi Lab 5203-GA, 5203-BO, 5213-GA, 5213-BO, 5223-GA, 5223-BO, 5233/3-GA, 5233/3-BO, 5241/3-GA, 5241/3-BO, 5243/3-GA, 5243/3-BO, 5245/3-GA,
More informationSHELDON Versatile seating
UK street furniture designers & manufacturers As UK based, designers and manufacturers, Street Design can manufacture and supply Sheldon seating to suit your specific requirements. Sheldon versatile seating
More informationStreet Design. BUCKLAND seating. Buckland bench product details. Buckland technical specification. Buckland accessories. Buckland material finishes
Street Design established in 1986 UK street furniture designers & manufacturers, Leicestershire LE12 8LD Contact us BUCKLAND seating As UK based, designers and manufacturers, Street Design can manufacture
More informationStreet Design. MALL seating. Mall bench product details. Mall technical specification. Mall accessories. Mall material finishes
Street Design established in 1986 UK street furniture designers & manufacturers, Leicestershire LE12 8LD Contact us MALL seating As UK based, designers and manufacturers, Street Design can manufacture
More informationTelephone: Fax: Web site:
Street Design established in 1986 UK street furniture designers & manufacturers, Leicestershire LE12 8LD Contact us BEXLEY seating As UK based, designers and manufacturers, Street Design can manufacture
More informationStreet Design. CAMBERLEY seating. Camberley bench product details. Camberley seat product details. Camberley technical specification
Street Design established in 1986 UK street furniture designers & manufacturers, Leicestershire LE12 8LD Contact us CAMBERLEY seating As UK based, designers and manufacturers, Street Design can manufacture
More informationDaloc S33 (Y33) Security door RC3
Daloc S33 (Y33) Security door RC3 Reference Clear opening dimensions Outer dimensions frame Weight Single door S33 9 x 21 S33 10 x 21 S33 11 x 21 S33 12 x 21 ** Double door S33 15 x 21 S33 18 x 21 800
More informationPROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
More informationToilet Partition Hardware
Concealed and Surface Mounted Latches Toilet Partition Hardware D D 91-8 Used with 91-129 Housing merican Metal 91-330 Used with 91-129 Housing 91-84 91-130 For 1" Laminated Door 91-131 With Flat Tip Bar.
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationSECTION IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 53 IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationCLWP6048. Classic Sign Family Wall Panel. Part Number / Specifications. 60" Wide x 48" High CHPL Panel Wall Mount. ISO / Perspective View.
ISO / Perspective View Dwg. Date: pril 7, 25 ll Drawings Copyright. WP6048HRS (Single-Sided) Standard - Rectangular Panel C Upgrade Panel Option - Horizontal rched WP6048HPS (Single-Sided) Upgrade - Peaked
More informationIlluminated Components Portfolio
Illuminated Components Portfolio PRIME PRODUCTS, INC PRIME PRODUCTS, INC. 2755 Remico, S.W., Wyoming, MI 49519 T 616.531.8970 F 616.301.0033 info@primeproductsinc.com www. primeproductsinc.com 1 At Prime
More informationSECTION MECHANICAL IDENTIFICATION
SECTION 15190 MECHANICAL IDENTIFICATION PART 1 GENERAL 1.01 SECTION INCLUDES A. Section Includes: 1. Nameplates. 2. Tags. 3. Stencils. 4. Pipe Markers. 1.02 SUBMITTALS A. Submit valve chart and schedule,
More informationGota cassette. Version 1.10 Sun Protection AVZ 3G.1
Version 1.10 Sun Protection AVZ G.1 G.2 Sun Protection AVZ Version 1.10 Part number Description Paint finish Length in m 1 4211 772-090 Alu wall bracket 140 mm Mill finish 4211 772-008 Idem RAL 705 light
More informationDate Stamps DIN. Material. H ardness. Ød2 Ø
DIN Ø Ød2 Ø 5 Year & Months Months Year 1. Inner Insert can not be removed from front, but be removed from the mould parting line in the machine after dismantle the mold. 2. Inner insert are replaceable,
More informationoscar Design: Charaziak Design Studio
Design: Charaziak Design Studio oscar v i p oscar v i p Elite armchair designed for maximum comfort of use. The harmonious, timeless shape, the simple, classic design and comfortable, ergonomically profiled
More informationA. It is preferred that all submittals to be submitted electronically in PDF format.
June 20 2013, Rev 00 10 2800 Toilet, Bath, and Laundry Accessories PART 1. GENERAL 1.01 This Section includes: A. Toilet room accessories: 1.02 Submittals 1. Grab bars 2. Metal framed mirrors 3. Sanitary
More informationLAND PORTS AUTHORITY OF INDIA
LAND PORTS AUTHORITY OF INDIA DEPARTMENT OF BORDER MANAGEMENT MINISTRY OF HOME AFFAIRS, GOVERNMENT OF INDIA TENDER DOCUMENTS FOR DEVELOPMENT OF INTEGRATED CHECK POST SUPPLY AND FIXING SIGNAGE, AT JOGBANI
More informationSECTION IDENTIFICATION FOR HVAC PIPING, DUCTWORK AND EQUIPMENT
SECTION 23 05 53 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Plastic Nameplates 2. Tags 3. Plastic Pipe Markers 4. Ceiling Tags 5. Detectable Underground Tape 6. Stencils PART 2 - PRODUCTS 2.1 MANUFACTURERS
More informationmiramondo Technical Informations 1/6 Il Posto L
1/6 Il Posto L Technical Informations public design GmbH - Miramondostr. 6-2504 Sooss - Austria - office@.com - www..com Il Posto L 2/6 Dimensions 654 165 654 Convex Dimensions 654 165 440 625 public design
More informationDIVISION 12 - FURNISHINGS. Section General Discussion. Introduction
Section 12000 - General Discussion This General Discussion Section contains material which is important to the successful fabrication and/or installation of furnishings and equipment in construction projects.
More informationJunction boxes. Surface mounting - IP44 - IP55 - IP56 TECHNICAL CHARACTERISTICS
Junction boxes Surface mounting - IP44 - - IP56 TECHNICAL CHARACTERISTICS Technical specifications 3 models with cable outlets and snap fixed cover (IP44 according to Standards EN 60529) 7 models with
More informationDescription: SM-BGA socket for BGA223 19x15 array 0.5mm pitch 8mm x 10mm x 1.2mm DUT
Silver Ball Matrix BG Socket Recommended Torque 1.5 in-lb. Features Wide temperature range (-55C to +150C). Current capability is 4 per pin. Over 40GHz bandwidth @-1dB for edge pins. Low and stable contact
More informationIMPORTANT: WILL NOT FIT COUNTRYMAN MODELS
Part #1410-0102-07 2 3 1 IMPORTANT: WILL NOT FIT COUNTRYMAN MODELS Apply masking tape around the bottom grille opening and across the bottom of the upper facto ry grille.. Open the hood and remove the
More informationA. Submit properly identified manufacturer's literature before starting work.
SECTION 10400 IDENTIFYING DEVICES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Labor and materials required for installation of plaque, school name and address numbers, directional signage, signage
More informationATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.
F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405
More informationPiping & Equipment Identification
Piping & Equipment Identification Part 1 General 1.01 Description of Work A. Work in this section includes: Identification materials, including necessary accessories indicated on Contract Documents and
More informationBeautiful balustrades DESIGNER FRAMELESS GLASS BALUSTRADES & POOL FENCES
Beautiful balustrades DESIGNER FRAMELESS GLASS BALUSTRADES & POOL FENCES CUBOID FACE-FIXED BALUSTRADE A discreet and invisibly fixed system for attaching glass balustrades and pool fencing without disturbing
More informationWall-mount Bracket. VIVOTEK Fixed Dome & PTZ Series. Installation Guide. IP Sur veillance. Using AM-215 wall-mount bracket and compatible accessories
VIVOTEK Fixed Dome & PTZ Series Wall-mount Bracket Installation Guide Using AM-215 wall-mount bracket and compatible accessories Corresponding part numbers: AM-215: 909004300G (v01) 909004301G (v02) Rev.
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationSECTION 12345.1 - MODULAR STEEL LABORATORY CASEWORK 1 PART 1 PRODUCTS 1.01 MANUFACTURER A. Casework and equipment manufacturer: ALIR Systems, Inc., 245 Harrison St, Jamestown, New York, 14701. 1.02 CASEWORK
More informationSECTION CABLE TRAYS FOR ELECTRONIC SAFETY AND SECURITY
SECTION 26 05 36 CABLE TRAYS FOR ELECTRONIC SAFETY AND SECURITY PART 1 -GENERAL 1.1 SUMMARY A. Section includes cable tray. 1.2 REFERENCES A. ASTM A 123 Standard Specification for Zinc (Hot-Dip Galvanized)
More informationPRODUCT DETAILS HR Series
PROUT ETILS N. uyamaca, El ajon, 900 escription: The patented cast parts are designed for round, tubular handrails. The part is attached with two stainless steel tamper resistant screws and two-part epoxy.
More information1. ASME A Scheme for the Identification of Piping Systems.
SECTION 40 05 53 - IDENTIFICATION FOR PROCESS PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Nameplates. 2. Tags. 3. Stencils. 4. Pipe markers. 5. Labels. 6. Lockout devices. B. Related Requirements:
More informationTender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Finish carpentry items including shop prefabricated casework and countertops..2 Hardware and attachment accessories..3 Wood Benches..4
More informationAPPLICATION COMMERCIAL, INDUSTRIAL AND RESIDENTIAL; SCREW MOUNTED Gen Purpose Wiring Devices - Wall Plates & Covers
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com PJSE7I Single End Plate Ivory Pass & Seymour/Legrand Catalog Number Manufacturer Description
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationbehavioral health seating and tables
behavioral health seating and tables behavioral health Stance Healthcare is pleased to introduce this new offering of intensive-use seating designed for the most challenging environments. By integrating
More informationLocks. Locks OUTLETS NATIONWIDE
OUTLETS NATIONWIDE 500 Now it s easy to find just the right padlock for any security application. Choose from a wide selection of padlocks suitable for medium to high quality insurance quality and suitable
More informationPREMIUM QUALITY GATE LOCKS DESIGNED IN THE UK
PREMIUM QUALITY GATE LOCKS DESIGNED IN THE UK YOUR GATE S NOT LOCKED UNTIL IT S ZEDLOCKED Simple design with minimal moving parts makes the Zedlock perfect for harsh environments, and works even in freezing
More informationSECTION IDENTIFYING DEVICES
SECTION 10400 IDENTIFYING DEVICES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Labor and materials required for installation of plaque, school name and address numbers, directional signage, signage
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationARCHITECTURAL HARDWARE & ACCESSORIES
RHITETURL HRDWRE & ESSORIES rado Denver, olo DOOR PROTETION PLTES & DOOR EDGES DON-JO MFG., IN. P.O. ox 929 Sterling, M 01564 PHONE: 978.422.3377 FX: 978.422.3467 WTS: 800.628.8389 WTS FX: 800.278.8202
More informationSECTION 10520: FIRE EXTINGUISHERS AND CABINETS
SECTION 10520: FIRE EXTINGUISHERS AND CABINETS PART 1 GENERAL 1.01 GENERAL REQUIREMENTS: A. This section specifies fire extinguishers, cabinets for fire extinguishers, fire and other accessories. Their
More informationWALL PLATES & SPECIALTIES
& SPECIALTIES SWP26LA Screwless Polycarbonate Wall Plates A F A. Molded of rugged.065" thick polycarbonate. B. Seamless, sleek, super smooth construction provides no dirt-catching channel around plate
More informationfrom page 586 from page 609
from page from page 0 from page from page 0 from page from page 0 from page 0 from page MSX. Design Standard components - MSX-B base: glass-fibre reinforced polyamide based (PA) technopolymer, black colour,
More informationINSTALLER S MANUAL 2 MICROWAVE OVENS
Page Nº: 9 of 95 2 MICROWAVE OVENS Check that all the technical information appearing on the specification plate corresponds to the characteristics of the mains electrical supply in question (voltage and
More informationGeneral Purpose Flat Wagon
General Purpose Flat Wagon This is a freelance model of a flat wagon used by any number of railways for transporting large and awkward loads. The kit includes optional load securing rings and a pair of
More informationTuk-Rivet Punched rivet system
Tuk-Rivet Punched rivet system The process Punch riveting with a solid rivet permits one or more joined elements such as semi-finished product types, sheet, profile and cast components to be fastened together.
More informationDRAMA. HAMARI auditorium furniture solutions Oy Runeberginkatu 34 e FI Porvoo
DRAMA Drama is a comfortable chair with a curved plywood backrest. The theatre model comes with steel legs or upholstered side panels. Construction: Steel tube 40 x 20 mm. The seat works with counterweight
More information+91-8071806346 Suraj Enterprises http://www.surajlabel.com/ We counted among the prominent business names engaged in the domain of manufacturing, retailing and supplying Labels, Stickers & Name Plates.
More informationC. Samples for Initial Selection: Manufacturer's color charts showing the full range of colors available.
SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationirwin seating company
A u d i t o r i u m S e a t i n g irwin seating company The Irwin Difference People, Products & Services For over 100 years, Irwin Seating Company s sole focus has been on meeting our customers needs for
More information*********************************************************************************************************
10400 IDENTIFYING DEVICES ********************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 10 14 00 *********************************************************************************************************
More informationBanquet & Housekeeping SOLUTIONS
Banquet & Housekeeping SOLUTIONS Flexible, luxurious and natural That s where the banquet industry is going with respect to furnitures and at Hospitality Solutions Group, our endeavour is to create sturdy,
More informationTSB Suffix Suffix. 503Si 2 Suffix
Catalog Numbering Code Europa locks TS 230 02 Suffix Suffix Series Europa locks Options (blank) = Standard (105 ) HT = High Temperature (150 ) US = 600V Pitch 230 = 8mm 500 = 10mm 500SK = 10mm, Elongated
More informationMITCHELL FURNITURE SYSTEMS, INC.
MITCHELL FURNITURE SYSTEMS, INC. MITCHELL WALL MOUNTED TABLE/BENCH SYSTEM: ARCHITECTURAL DATA Laminate, Backer & Adhesive GREENGUARD Certified Components PART I. - ATTENTION: SPECIFIER AND/OR ARCHITECT
More informationSECTION IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 53 - IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Nameplates. 2. Tags. 3. Stencils. 4. Pipe markers. 5. Ceiling tacks. 6. Labels. 7. Lockout
More informationFloor Stops - Dome. FS13 Dome Stop. FS17 Dome Stop. R14 Riser. Features:
Floor Stops - Dome FS13 Dome Stop Standard FS13 for use where no threshold is used. Heavy-Duty Cast Dome Stops constructed of brass. Unique riser design of R14 (below) allows easy conversion to threshold
More informationPentagon. Fileguard Installation Instructions 1 IMPORTANT NOTE
Fileguard Installation Instructions 1 Tools that will be needed for this installation are: NOTE: DO NOT THROW OUT ANY PACKAGING MATERIAL UNTIL THE INSTALLATION IS COMPLETE AND YOU ARE SURE THAT YOU HAVE
More informationSECTION PRE-MANUFACTURED CABINETS
SECTION 12390 PRE-MANUFACTURED PART 1 GENERAL 1.1 DESCRIPTION OF WORK A. The work includes furnishing all labor, materials and equipment required to complete the Pre-Manufactured Cabinet work as shown
More informationFor a professional approach to your sign needs, consult a professional team.
POST MOUNTED SIGN SYSTEMS INTRODUCTION FIRST IMPRESSIONS When attracting new custom, your Company sign is often the primary thing to be noticed, so first impressions are paramount. Location, design, colour
More informationCLWP2418. Classic Sign Family Wall Panel. Part Number / Specifications. 24" Wide x 18" High CHPL Panel Wall Mount. ISO / Perspective View.
CLWP2418 ISO / Perspective View Dwg. Date: pril 7, 25 Temple, TX 765 CLWP2418. CLWP2418 WP2418HRS (Single-Sided) Standard - Rectangular Panel C Upgrade Panel Option - Horizontal rched WP2418HPS (Single-Sided)
More informationPRODUCT: TJ Corner Guards READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL M-F 7:00 AM 5:00 PM PST
PRODUCT: TJ Corner Guards READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL 916-631-8071 M-F 7:00 AM 5:00 PM PST The MetalCloak experience includes the ease of installation of our products.
More informationGCSE 4111/01 DESIGN AND TECHNOLOGY UNIT 1 FOCUS AREA: Resistant Materials Technology
Surname Other Names Centre Number 0 Candidate Number GCSE 4111/01 DESIGN AND TECHNOLOGY UNIT 1 FOCUS AREA: Resistant Materials Technology A.M. WEDNESDAY, 15 May 2013 2 hours ADDITIONAL MATERIALS Question
More informationSECTION IDENTIFICATION OF PLUMBING, PIPING AND EQUIPMENT. A. Section includes nameplates, tags, stencils and pipe markers.
SECTION 22 05 53 IDENTIFICATION OF PLUMBING, PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes nameplates, tags, stencils and pipe markers. B. Related Sections: 1. Section 09 05 00
More informationUrethane Edge Colors Cert no. SW-COC
Wear-Resistant Paint Colors Silver Slate Grey Black Khaki Dove Grey Putty Brown Fusion Monticello Natural Pear Huntington Wild Cherry Versailles Anigre Empire Mahogany Golden Oak Medium Lanty Oak Montana
More informationB. Samples: For color, letter style, and graphic representation required for each identification material and device.
PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
More informationFlush Round Single or Multi-Service Non-Metallic Concrete Floor Box Floor Boxes
Flush Round Single or Multi-Service Non-Metallic Concrete Floor ox Flush Round Single or Multi-Service Non-Metallic Concrete Floor ox Dimensions Inches (mm) D C PF1 Min. Depth of Pour 3.00" (76.2) Capacity
More information2016 Table Finish Guide
Cape Contract Furniture Inc. style innovation comfort 2016 Table Finish Guide www.capefurniture.net sales@capefurniture.net 1.888.343.2273 Index Standard High Pressure Laminate Finishes 3 Standard Base
More informationSECTION IDENTIFICATION OF HVAC PIPING AND EQUIPMENT. A. Section includes nameplates, tags, stencils and pipe markers.
SECTION 23 05 53 IDENTIFICATION OF HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes nameplates, tags, stencils and pipe markers. B. Related Sections: 1. Section 09 05 00 Common
More informationSECTION IDENTIFICATION FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220553 - IDENTIFICATION FOR PLUMBING PIPING AND EQUIPMENT Henderson Engineers, Inc. PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. Extent of Plumbing work to be identified as required by this Section
More informationRound Indicator Lights Mounting Hole Page
PRODUCT SERIES Round Indicator Lights Page 8, &. 9. &..7 - NEMA -R.7 8 & 9. 7. 8. 9 7. 8. - NEMA -R.9.9 Indicator Lights.7,.. 7. Rectangular Indicator Lights Panel Cutout. x.. x. 7 & 7. x.8 8. x. 9 & 7.
More informationBC-SERIES Screw-Jack Pedestal for Creative Design. Specifications text. Menu. Page 1/7
Specifications text BC Series Screwjack Pedestal 3rd Generation Menu Introduction of the BC series 1 Pedestal 1.1 Head 1.2 Base 2 Sleeve 3 Tabs 4 Lock 5 Slope corrector PH5 6 Slope corrector BC-PH5 7 Reverse
More information233/2 230-S multipurpose chair
230 range 230/1 230 multipurpose chair 30 ¾" 21 ¼" 22 ⅞" 17 ⅜" 230/2 230 multipurpose chair 30 ¾" 23 ¼" 22 ⅞" 17 ⅜" 232/1 230 task chair 29 ⅞"/34 ⅝" 25 ⅝" 25 ¼" 15 ¾"/20 ½" 232/2 230 visitor chair 29 ⅞"/34
More informationBottom Back Light OPT-FL series
Combined Bar Light Model -LIM -LIM -LIM -LIM V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W Bottom Back Light -FL series Applied in the large area illumination, to enhance the high contrast silhouettes for high
More information2018 WEDDING SERVICES
2018 WEDDING SERVICES Photography by Ryan & Alyssa Photography ryanandalyssa.com WEDDING SERVICES WEDDING INVITATIONS FULL CUSTOM SUITE: custom design fee starts at $600 INCLUDES: Main invitation, RSVP
More informationWall Plates & Specialties
Molded of rugged.065" thick polycarbonate. Seamless, sleek, super smooth construction provides no dirt-catching channel around plate s perimeter. & Specialties An extra 1/8" width and height than standard
More informationELECTRICAL CARGO BIKE with mechanical disc breaks
ELECTRICAL CARGO BIKE with mechanical disc breaks SAMLEMANUAL ASSEMBLE MANUAL Read and understand these instructions before you begin the assembly. The bike comes partly assembled, and it is important
More informationKitchen Fittings Hanging Cabinets and Accessories
Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting
More informationBrown lamp with projector 5 lamps 2 Brass lamp 4 lamps 3 Brass lamp 6 lamps 3 Stainless steel lamp 1 lamp 18 Stainless steel and glass lamp 1 lamp 16
LAMP PRODUCT QTY Brass and stone lamp 6 lamps 8 Brass and stone lamp 3 lamps 10 Brass and glass lamp 3 lamps 5 Brass and glass lamp 6 lamps 4 Brass and glass lamp 8 lamps 2 Brass and glass lamp 5 lamps
More informationALBUM: OPTI ALBUM MADE IN PLEXIGLASS OF DIFFERENT THICKNESS AND DIFFERENT COLOURS. MAXIMUM OF 80 CARDS OR AN ACCORDION WITH 60 PAGES.
PHOTOGRAPHIC ALBUM ALBUM: OPTI ALBUM MADE IN PLEXIGLASS OF DIFFERENT THICKNESS AND DIFFERENT COLOURS. INSIDE YOU CAN INSERT LOOSE CARDS EITHER IN WHITE OR BLACK, OR AS A ACCORDION. MAXIMUM OF 80 CARDS
More informationHorticulture Supplies & Services Private Limited
New Models 2017 Horticulture Supplies & Services Private Limited 1 Index Synthetic Pearl Sea Finish 03 Aluminium & Stainless Steel Planter Models 08 Metal Stands 11 2 Synthetic Pearl Sea Shell Finish Pearl
More informationTRADITIONAL Nameplates and Sign Holders. Traditional holders for desks, counters, walls and doors enhance the signs that serve you daily.
2 TRDITIONL Nameplates and Sign Holders Traditional holders for desks, counters, walls and doors enhance the signs that serve you daily. DESK HOLDERS 3 Sign holders for the desk are designed in many styles
More informationProcedure for Constructing Housings for Passive Field Sampling
Page 1 of 5 SOP #: 1130 1.0 Purpose and Applicability Procedure for Constructing Housings for Passive Field Sampling This document outlines a procedure for preparing a weather-proof housing for the Wagner-Leith
More informationMatte Black NEW! D Series. Ask about other finishes! D D D D Fasteners Included M4 x 25
2018 Addendum 2018 NEW! D200000 Series Matte Black D205192-94 28.5 C 8.5 D204128-80 C3 C2 C1 20 11 D205320-94 15 15 D29515-80 25 Ask about other finishes! Fasteners Included M4 x 25 3 NEW! D200000 Series
More information19. SHIELDED WINDOWS.
19. SHIELDED WINDOWS. GENERAL INFORMATION Shielded windows consist of one or more window layers with a conductive intermediate layer. They are applicable for all visual display systems, e.g. in meters
More information2100 series exit devices. rugged reliability
rugged reliability Yale 2100 introduction It s no secret that the 2100 series flatbar exit device has a reputation as the right choice for meeting the rigors of demanding industry segments. The quality
More informationCOLOURS PRODUCT DESCRIPTION SEAT CUSHION DESIGN KASPER SALTO 1967-
NAP The Danish designer Kasper Salto has designed the NAP chair for Fritz Hansen. NAP is a series of light chairs, armchairs and bar- and counter stools designed for optimum sitting comfort regardless
More informationLOW PROFILE LIFEGUARD STANDS
LOW PROFILE LIFEGUARD STANDS ASSEMBLY INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 (503) 266-2231 Fax (503) 266-4334 www.srsmith.com
More informationSINGLE TRACK BYPASS (patent pending) barn door hardware
SINGLE TRACK BYPASS (patent pending) barn door hardware Installation Manual What is included in your kit: Part number Part name Quantity 1 Inner door hanger 2 2 Outer door hanger 2 3 5/16 x 1.5 lag bolts
More informationADIRONDACK CHAIR STEP BY STEP INSTRUCTIONS
STEP BY STEP INSTRUCTIONS PLAN RC39 ADIRONDACK CHAIR DESIGN: REAL CEDAR ORIGINAL This super simple design puts a modern spin on the classic lawn chair. Boasting clean, bold lines, these oversized seats
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationSECTION COMMON WORK RESULTS FOR HVAC
SECTION 23 05 00 COMMON WORK RESULTS FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball Valve. 2. Hangers and Supports. 3. Identification Tags and Sleeves. 1.2 INCLUDED SECTIONS A. Section
More informationKASPER SALTO DESIGN ENVIRONMENT & TESTS DESCRIPTION WARRANTY UPHOLSTERY
ICE CHAIR The Ice chair, designed by Kasper Salto, marks a milestone in the history of Fritz Hansen: Ice is the first chair from the hand of Fritz Hansen that is equally suited for both indoor and outdoor
More informationWALL PLATES & SPECIALTIES
& SPECIALTIES SWP26LA Screwless Polycarbonate Wall Plates A F A. Molded of rugged.065" thick polycarbonate. B. Seamless, sleek, super smooth construction provides no dirt-catching channel around plate
More informationCamaro License Plate Frame Bracket, V8
PART #59389 2010-11 Camaro License Plate Frame Bracket, V8 PACKING LIST Before installation, use this checklist to make sure all necessary parts have been included. ITEM QTY CHECK PART NUMBER DESCRIPTION
More information