Note: Parts without part numbers are for reference only and cannot be purchased individually.
|
|
|
- Aubrey Gaines
- 5 years ago
- Views:
Transcription
1 Parts Ordering Replacement Parts To order parts or reach our service department, call between 7:30am and 5:30pm (CST), Monday through Friday. Having the Model Number and Serial Number of your machine available when you call Jointer/Planer Parts List Note: Parts without part numbers are for reference only and cannot be purchased individually. Index No. Part No. Description Size Qty 1... JJP8BT-1...Chain Support Bracket JJP8BT-2...Sprocket JJP8BT-3...E-Clip...Ø TS Lock Washer...M TS Hex Nut...M TS Flat Washer...M JJP8BT-7...Corner Sprocket JJP8BT-8...Chain JJP8BT-9...Base JJP8BT-10...Infeed Pointer Label TS Socket Head Cap Screw...M5x JJP8BT-12...Driven Lead Screw JJP8BT-13...Drive Lead Screw JJP8BT-14...Extension Table TS Socket Head Cap Screw...M6x JJP8BT-16...Crank Arm Bushing JJP8BT-18...Main Table JJP8BT-19...Crank Arm JJP8BT-20...Guide Rail TS Socket Head Cap Screw...M6x JJP8BT-23...Knob Screw JJP8BT-24...Knob JJP8BT-25...Locking Handle TS Pan Head Machine Screw...M4x TS Lock Washer...M JJP8BT-29...Pointer TS Hex Nut...M JJP8BT-32...Cord Clamp TS Pan Head Machine Screw...M4x JJP8BT-34...Cover JJP8BT-35...Rear Support JJP8BT-36...Self-Tapping Screw...ST4.2x JJP8BT-37...Scale TS Socket Head Cap Screw...M5x JJP8BT-39...Power Cord Protector JJP8BT-40...Rear Support Cover JJP8BT-41...Pin JJP8BT-42...Self-Tapping Screw...ST4.2x JJP8BT-43...Power Cord JJP8BT-44...Screw JJP8BT-45...Spring TS Flat Washer...M TS Cap Nut...M JJP8BT-48...Thread Lock Bushing TS Hex Nut...M
2 Jointer/Planer Parts List Index No. Part No. Description Size Qty JJP8BT-50...Outfeed Table Spacer JJP8BT-51...Infeed Table Spacer JJP8BT-52...Bearing JJP8BT-53...Spring JJP8BT-54...Bushing Block JJP8BT-55...Spring JJP8BT-56...Roller Knife JJP8BT-58...Hose Adapter JJP8BT-59...Pin JJP8BT-60...Knife Gib JJP8BT-61...Screw JJP8BT-62...Cutterhead TS Hex Nut...M JJP8BT-64...Outfeed Table TS Flat Washer...M TS Socket Head Cap Screw...M4x JJP8BT-67...Fence Support TS Flat Washer...M TS Lock Washer...M TS Hex Cap Screw...M6x JJP8BT-71...Fence Bracket JJP8BT-72...Screw TS Socket Head Cap Screw...M6x JJP8BT-74...Washer...Ø JJP8BT-75...Locking Nut JJP8BT-76...Angle Pointer JJP8BT-77...Pin JJP8BT-78...Shaft JJP8BT-80...Hex Cap Screw...M4x JJP8BT-81...Angle Marked Fence Support JJP8BT-82...Fence JJP8BT-83...Dust Chute JJP8BT-84...Knob JJP8BT-85...Dust Housing JJP8BT-3...E-Clip...Ø JJP8BT-87...Pointer JJP8BT-88...Infeed Direction Label TS Pan Head Machine Screw...M5x JJP8BT-90...Knob JJP8BT-91...Adjusting Rod TS Nylon Insert Lock Nut JJP8BT-93...Shaft JJP8BT-94...Bracket JJP8BT-95...Cushion Block JJP8BT-96...Cutterhead Guard TS Flat Head Screw...M5x JJP8BT-98...Post JJP8BT-99...Spring JJP8BT Support Bracket TS Pan Head Machine Screw...M6x JJP8BT Retaining Ring TS Lock Washer...M TS Socket Head Cap Screw...M8x JJP8BT Shield JJP8BT Shaft
3 Jointer/Planer Parts List Index No. Part No. Description Size Qty JJP8BT Washer JJP8BT Anti-Kickback Finger JJP8BT Bearing Cover JJP8BT Bearing JJP8BT Front Support JJP8BT Cut Depth Scale Label JJP8BT Spring TS Socket Head Cap Screw...M5x JJP8BT Switch Mount JJP8BT Switch JJP8BT Pulley JJP8BT Belt JJP8BT Spacer JJP8BT Sprocket JJP8BT Socket Head Cap Screw...M6x JJP8BT Drive Chain JJP8BT Gear JJP8BT Pulley TS Pan Head Machine Screw...M5x JJP8BT Key JJP8BT Belt JJP8BT Shaft JJP8BT Front Support Cover JJP8BT JET Nameplate JJP8BT Key JJP8BT Washer JJP8BT Sprocket JJP8BT Square Spacer JJP8BT Gear JJP8BT Gear Bracket JJP8BT Spring JJP8BT Key JJP8BT Pan Head Machine Screw...M3x TS Lock Washer...M TS Flat Washer...M JJP8BT Wire Clamp JJP8BT Wire JJP8BT Motor Pulley JJP8BT Screw JJP8BT Bracket JJP8BT Washer TS Lock Washer...M JJP8BT Socket Head Cap Screw...M8x JJP8BT Motor JJP8BT Cover JJP8BT Star Washer...M JJP8BT Strain Relief JJP8BT Switch Box TS Pan Head Machine Screw...M5x JJP8BT Overload Switch JJP8BT Switch Box Cover JJP8BT Self-Tapping Screw...ST4.2x JJP8BT Nut JJP8BT On/Off Switch JJP8BT Switch Safety Key (not shown) JJP8BT Shaft
4 Jointer/Planer Parts List Index No. Part No. Description Size Qty JJP8BT Infeed Table TS Set Screw...M4x Cord Clamp Motor Housing JJP8BT Brush Holder JJP8BT Brush JJP8BT Brush Cap Bearing Inductor Stator Insulation Pan Armature Stator Stator Insulation Pan Self-Tapping Screw...ST5x JJP8BT Fan Bearing JJP8BT Motor Cover JJP8BT Switch Box Faceplate JJP8BT Jack Screw JJP8BT Rivet...Ø3x JJP8BT Lock Shaft JJP8BT Fence End Cover JJP8BT Fence End Cover JJP8BT Lock Shaft JJP8BT Rod Push Block (not shown) JJP8BT-KSG...Knife/Blade Setting Gauge (not shown)
5 Assembly Drawing Index 30
6 Planer Table Assembly 31
7 Motor Front Frame Assembly
8 Chain Drive Assembly Front Cover Assembly 33
9 Cutterhead Guard Assembly Dust Cover Assembly 34
10 Jointer Infeed Table Assembly Jointer Outfeed Table Assembly 35
11 Cutter Head/Feed Roller Assembly 36
12 Jointer Fence Assembly 37
13 Rear Frame and Cover Assembly 38
14 Jointer/Planer Stand* Index No. Part No. Description Size Qty 1... JJP8BT Stand Top Support, Short JJP10BT Leg JJP10BT Support Plate, Long JJP8BT Support Plate, Short JJP10BT Stand Top Support, Long TS Hex Nut...M TS Lock Washer...M TS Flat Washer...M Carriage Bolt...M6x TS Hex Nut...M TS Flat Washer...M JJP10BT Rubber Foot TS Hex Cap Screw...M6x TS Flat Washer...M TS Lock Washer...M TS Socket Head Cap Screw...M8x * This item is an optional accessory. To order, call our service department at between 7:30am and 5:30pm (CST), Monday through Friday and ask for Stand - Model No. JJP-8BT, Stock #
15 Electrical Connection L N E Overload Switch Outlet Power Cord Plug Power Switch Start Switch Stop 0.33uF/275V C Stator Rotor (Yellow and green wire) M 1~ E Stator Rotor WALER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee Phone:
Parts List Index No. Part No. Description Size Qty
Parts List Index No. Part No. Description Size Qty 1... TS-1541031...Lock Nut...M8... 4 2... JJP12-002...Washer... 4 3... JJP12-003...Outfeed Table Bracket Shaft... 1 4... JJP12-004...Outfeed Table Bracket,
25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
Note: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours, www.waltermeier.com). Having the Model Number
SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
Operating Instructions and Parts Manual 22-inch Planer Models 201 and 201HH
Operating Instructions and Parts Manual 22-inch Planer Models 201 and 201HH WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-0460224 Ph.: 800-274-6848 Revision
Operating Instructions and Parts Manual Model JWS-25X Shaper
Operating Instructions and Parts Manual Model JWS-2X Shaper JET 27 New Sanford Road LaVergne, Tennessee 7086 Part No. M-70809 Ph.: 800-27-688 Revision A2 02/20 www.jettools.com Copyright 20 JET Table Parts
Parts List: Column Assembly
Column Assembly 39 Parts List: Column Assembly Index No. Part No. Description Size Qty 1... WP2510-401...Idler Support Base... 1 2... TS-1540071...Hex Nut...M10... 2 3... TS-1550061...Flat Washer...M8...
RYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
Note: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours, www.waltermeier.com). Having the Model Number
SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
J-3-D PART NO DATE:
37-380 & 37-877 8 PROFESSIONAL JOINTER J-3-D PART NO. 909563 DATE: 05-12-04 Page1/ J-3-D /DEB REPLACEMENT PARTS * 1345487 CUTTERHEAD ASSY, INCL: 1 1340196 KNIFE SCREW 2 1345488 BAR 3 37-355 KNIVES (SET
Symptom Possible Cause Correction. Motor will not start Low voltage. Check power line for proper voltage. Open circuit in motor or loose connection.
Saw blade Blade guard Troubleshooting Symptom Possible Cause Correction Motor will not start Low voltage. Check power line for proper voltage. Open circuit in motor or loose connection. Inspect all lead
Upper Wheel Assembly Index No. Part No. Description Size Qty
Upper Wheel Assembly 1... JWBS16B-101...Saw Body... 1 2... TS-0152011...Carriage Bolt...5/16-18x1... 6 3... JWBS18-103...Upper Wheel Bracket... 2 4... TS-0680031...Flat Washer...5/16... 6 5... TS-0720081...Lock
PARTS Stand Breakdown
PARTS Stand Breakdown 35-5 35-2 35-4 63 1 2 3 4 5 35-1 35-3 36 37 38 39 35 34 33 32 30 28 6 7 8 21 29 23 22 27 26 25 24 42 43 44 45 46 47 9 10 62 61 60 51 11 59 19 18 12 12 13 58 14 57 15 56 55 54 53 52
Parts List: Stand Assembly
Parts List: Stand Assembly Index No. Part No. Description Size Qty 1... VB-A50...Belt...A-50... 1 2... TS-0267021...Socket Set Screw...1/4-20x1/4... 2 3... PJ882-503...Motor Pulley... 1 4... PJ882-205...Key...5x5x22...
SPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 342186-7 SWITCH PROTECTOR 1 002 911118-1 PAN HEAD SCREW M4X12 6 003 155512-9 SWITCH PLATE 1 004 651757-2 SWITCH ABK266 1 006 685712-2 SPONGE SHEET 60X60 1 007 911118-1 PAN HEAD SCREW M4X12 1
Operating Instructions and Parts Manual 8-inch Parallelogram Jointer Model PJ-882 and PJ-882HH
Operating Instructions and Parts Manual 8-inch Parallelogram Jointer Model PJ-882 and PJ-882HH Powermatic 427 New Sanford Road LaVergne, TN 37086 Part No. M-1610079 Ph.: 800-274-6848 Revision F1 10/2015
Upper Wheel Assembly Exploded View
Upper Wheel Assembly Exploded View 36 Upper Wheel Assembly Parts List Index No. Part No. Description Size Qty 1... JWBS18-135...Hex Nut...5/8-18UNF, LH... 1 2... PM1800-102...Flat Washer... 1 3... BB-6204VV...Ball
Table Parts List Index No. Part No. Description Size Qty
Table Parts List 1... TS-1521011...Socket Set Screw...M4x4... 3 2... JWS35X-102...Insert Ring (Small)... 1 3... TS-2285121...Flat Head Machine Screw...M5x12... 3 4... JWS35X-104...Insert Ring (Large)...
Replacement Parts. Parts List: Body Assembly
Replacement Parts To order parts or reach our service department, call 1-800-274-6848, Monday through Friday (see our website for business hours, www.powermatic.com). Having the Model Number and Serial
MODEL RA-2500N RADIAL ARM SAW
1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900549 WASHER 1.78 3 6080529 ARBOR COLLAR 31.02 4 6760117 OILLESS METAL 1.57 5 9270612 CLAMP SCREW M6 X 12 0.19 6 9220625 HEX. SOCKET HEAD BOLT M6 X 25 0.22
Headstock Assembly 31
Headstock Assembly 31 Parts List: Headstock Assembly Index No. Part No. Description Size Qty 1... 6294736...Faceplate...3... 1 2... 6295796...Nyloc Insert Socket Set Screw...1/4-20x3/8... 4 3... 6294725...Spur
Parts List: Head Assembly
Head Assembly 23 Parts List: Head Assembly Index No. Part No. Description Size Qty 1...JWP15H-001... Head Casting......1 2...TS-1525021... Set Screw... M10x12...8...JWP15DX-CA... Cutter Head Assembly (Index
RYOBI 10 in. TABLE SAW MODEL NO. BTS16 REPAIR SHEET
RYOBI 0 in. TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A FIGURE E FIGURE H FIGURE C FIGURE D 0 0 FIGURE B 0 0 NOTE A WARNING: Improper electrical repair of the table saw can result in damage to the drive
8" JOINTER Model 60B
8" JOINTER Model 60B Instruction Manual & Parts List M-0460282 (800) 274-6848 www.powermatic.com Machine will not start, 7. Motor failure. 7. Have motor tested. Repair or or repeatedly trips replace as
ST1014 PARTS ST1014 Headstock Breakdown
ST1014 PARTS ST1014 Headstock Breakdown 112 114 23 104 105 108 102 106 20 19 21 22 101 100 103 111 38 14 15 37 46 44 47 45 107 93 39 41 40 67 110 109 74 75 76 11 12 13 9 8 6 10 31-2 31-3 3 2 7 26 24 31-1
SECTION 9: PARTS. Table. Spiral Cutterhead For Model G0452Z Cutterhead For Models G0452/P Model G0452/P/Z (Mfg.
SECTION 9: PARTS Table 17 18 19 87 86 21 262-3 262-1 262-2 27 28 29 30 22 23 24 35 36 37 38 262 25 26 2 13 Cutterhead For Models G0452/P 10 45 12 13 7 8 9 50A 6 11 31 14 15 16 12 13 81 82 83 84 32 85 33
10x15-inch Woodworking Lathe Models JWL-1015, JWL-1015VS
Operating Instructions and Parts Manual 10x15-inch Woodworking Lathe Models JWL-1015, JWL-1015VS model JWL-1015VS shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-719100 Ph.: 800-274-6848
Operating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
Model 2800 Drill Press
Model 2800 Drill Press 20 Parts List: Model 2800 Drill Press Index No. Part No. Description Size Qty 1... PM2800-001...Strain Relief... 2 2... TS-1482051...Hex Cap Screw...M6x25... 4 3... PM2800-003...Retaining
Model G " Planer/Moulder -33- G0477 Body Breakdown
Model G0477 15" Planer/Moulder -33- G0477 Body Breakdown 202 200 201 203 204 194 192 193 195 205 141 143 196 197 142 148 146 178 183 154 155 198 199 144 145 153 157 159 158 181 182 188 185 184 187 186
MODELS W1723 and W " PLANERS PARTS LIST
MODELS W1723 and W1724 15" PLANERS PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz COPYRIGHT DECEMBER, 2003 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF
Operating Instructions and Parts Manual 15-inch Thickness Planer Models JWP-15DX and JWP-15HH
Operating Instructions and Parts Manual 15-inch Thickness Planer Models JWP-15DX and JWP-15HH JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708538 Ph.: 800-274-6848 Revision D 08/2014 www.jettools.com
SAVE THIS MANUAL FOR FUTURE REFERENCE. WARNING: To reduce the risk of
- ($ 0$$/ PP-,( /$( WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Part SP SAVE THIS MANUAL FOR FUTURE REFERENCE Printed in Taiwan
W1812 Owner's Manual (Mfd. Since 02/11) PARTS. Headstock 11V2 30V2 95V V2 8 25V2 41V2 25V2 23V2 27V2 PARTS -45-
-45- Headstock 20 21 23V2 8 25V2 23V2 25V2 26 28 87 88 57 56 40 47 39 39 37 46 33 34 42 63 13 2 93 93 71 70 69 17 41V2 92 30V2 31 32 7 38 35 33 34 37 40 43 16 11V2 1 4 5 9 61 62 61 62 18 10 3 8 19 14 95V2
TP1300 OWNERS MANUAL 13 INCH THICKNESS PLANER WITH LEGSET. For Your Safety: Read all instructions carefully Save this manual for future referenece
TP00 OWNERS MANUAL INCH THICKNESS PLANER WITH LEGSET For Your Safety: Read all instructions carefully Save this manual for future referenece SP Printed in Taiwan Parts List for " Thickness Planer Model
SECTION 9: PARTS Table
SECTION 9: PARTS Table 33 We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/
Record the serial number and date of purchase on your parts list for future reference.
Jointer Model: 0-0 Parts List Record the serial number and date of purchase on your parts list for future reference. Serial number: Date of purchase: Part # 0-0PL For more information: www.rikontools.com
Repair Parts. Parts List for RIDGID 10 Inch Table Saw Model No. TS Figure 1. RIDGID parts are available on-line at
Parts List for RIDGID 0 Inch Table Saw Model TS00 Figure 0 0 0 0 See Figure 0 See Figure 0 See Figure Parts List for RIDGID 0 Inch Table Saw Model TS00 Figure Always Order by Part Number - not by Number
11.0 Replacement parts
11.0 Replacement parts Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours,
Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040
Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Models G0453, G0453Z, G0454, G0454Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 09/17 and Owner's Manuals Revised 11/12 For questions or help with this product contact Tech Support at
SECTION 9: PARTS G0453Z
parts breakdown SECTION 9: PARTS G0453Z Headstock Breakdown 4 3 2 20 26 104 21 19 23 22 24 99 97 98 25 94 95 93 14 15 39 40 107 86 41 42 45 62 30 66 61 60 13 9 10 12 11 27 31 33 34 35 73 77-1 77 36 3738
ST1007/ST1012 PARTS ST1007
ST1007/ST1012 PARTS ST1007 Main Breakdown 30-7 30-8 30-10 30-9 30-1 30-3 30-6 30-2 30-4 30-5 82 83 84 77 78 79 80 30 60 59 58 62 64 61 46 44 63 66 65 55 56 26 45 27 45 27 25 43 37 41 50 42 72 73 51 53
535-Manual. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine -Manual Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 0 Cutter Assembly Stop Pin 0 Pin Reamer Assembly Carriage Assembly 0 Stop Screw
SECTION 9: PARTS Jointer Breakdown
Model G0490/G0490X (Mfd. Since 8/12) -49-1 3 8 7 9 12 14 15 16 18 21 23 24 24 28 29 32 33 37 38 38 44 45 49 50 51 53 55 56 57 58 59 61 60 64 65 66 68 72 75 80 81 82 83 84 85 86 87 88 90 91 92 94 93 96
Parts List: VBS-3612 Band Saw
Parts List: VBS-3612 Band Saw (refer to breakdowns on pages 35 and 36) Index No. Part No. Description Size Qty 1... VBS3612-101...Gear Box... 1 2... TS-0209101...Socket Head Cap Screw...3/8-16 x 2-1/4...
2705 03-09 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 33 55 54
MODEL RA-200N RADIAL ARM SAW
ITEM NO PART NO DESCRIPTION PRICE 1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900079 CONICAL SPRING 16.3 X 31.5 X 1.2 0.78 3 6940444 OUTER FLANGE 4.49 4 6940443 INNER FLANGE 4.91 5 6100509 PARALLEL
MODEL NO.: MI / 42100
MODEL NO.: MI-50 / 00 MODEL NO.: MI-50 BOX 1 OF 6 ROUTER LIFT PARTS BREAKDOWN Router Lift Assembly 6 5 2 2 1 5 5 8 12 11 2 26 27 0 12 26 27 27 22 22 27 19 A 5 26 12 26 22 25 25 7 18 18 15 15 7 9 1 17 2
Instructions and Parts Manual PM1900 Dust Collector
Instructions and Parts Manual PM1900 Dust Collector PM1900 with Filter Bag Kit (1791075BK) PM1900 with Canister Kit (1791075CK) WALTER MEIER (Manufacturing), Inc. 427 New Sanford Road LaVergne, TN 37086
I PLANER & THICKNESSER PARTS LIST ERSATZTEILLISTE LISTE DE PIECES
JPT-410 I PLANER & THICKNESSER JPT-410-M..10000295M 1~230V, 50Hz JPT-410-T..10000295T.3~400V, 50Hz PARTS LIST ERSATZTEILLISTE LISTE DE PIECES Walter Meier (Tool) AG Tämperlistrasse 5 CH-8117 Fällanden
15" PLANER MODEL G1021Z PARTS LIST
15" PLANER MODEL G1021Z PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL,
MODEL W " PLANER PARTS LIST. Phone: On-Line Technical Support:
MODEL W1692 15" PLANER PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz COPYRIGHT AUGUST, 2003 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY
RYOBI 10 in. (254 mm) COMPOUND MITER SAW MODEL NO. TS1352 REPAIR SHEET
RYOBI 0 in. (5 mm) COMPOUND MITER SAW MODEL NO. TS5 REPAIR SHEET FIGURE A 50 89 5 6 5 5 5 9 8 8 5 6 0 9 8 9 0 5 5 6 5 6 5 0 9 8 0 6 8 9 9 5 0 55 56 WARNING: Improper repair of a double insulated tool can
Model W1837 (For Machines Mfd. Since 8/18) PARTS. Main PARTS -83-
-83- Main 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 113 96 90 91 92 93 95 96 97 98 100 101 102 103 104 105 106 109
TP1300 OWNER S MANUAL
TP00 OWNER S MANUAL INCH THICKNESS PLANER For Your Safety: Read all instructions carefully Save this manual for future reference SP PrintedinTaiwan Parts List for " Thickness Planer Model. TP00 Figure
REF PART # DESCRIPTION REF PART # DESCRIPTION
MODEL G0453P POLAR BEAR SERIES 15" PLANER Manual Insert Congratulations on your purchase of a Model G0453P Planer! The Model G0453P is the same machine as the Model G0453Z but with a "cool" new look and
SECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
Parts List for Type 1
1 422190430001 FENCE BODY 1 2 901010600677 CAP SCREW 2 3 904010331451 WASHER 3 4 901010600605 CAP SCREW 2 5 904010101604S STEEL WASHER 2 6 422040105002 REAR SLIDE BLOCK 1 7 905040714459 STEEL PIN 1 8 928010414118
MODEL W " Jointer PARTS LIST
MODEL W1684 8" Jointer PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@woodstockint.com COPYRIGHT SEPTEMBER, 2002 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL
SECTION 8: PARTS Main Parts Breakdown
SECTION 8: PARTS 10 Main Parts Breakdown 6 1 7 9 2 4 8 15 60 61 62 63 64 110 11 12 13 18 19 21 17 22 23 24 27 14 25 34 65 35 66 67 83 84 36 37 68 69 85 70 80 86 38 73 81 87 89 82 90 71 72 74 91 79 88 92
Parts. Ordering Replacement Parts. Parts List
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours, www.waltermeier.com). Having the Model Number
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HS4N SLICER ML-136338 HS4N A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43311 (August 2015) F-43311 (August 2015) - 2 - HOBART 2015 Table of Contents
Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #
Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #1002493 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C3 02/2014 www.jettools.com
Main SECTION 10: PARTS
Main SECTION 10: PARTS Main Parts List 3 P0732003 MITER GAUGE ASSEMBLY 37 P0732037 TRANSFER PULLEY 3-1 P0732003-1 MITER GAUGE HANDLE 38 PR05M EXT RETAINING RING 15MM 3-2 PW01M FLAT WASHER 8MM 39 P6002-2RS
G5959Z 12" Left-Tilting Table Saw -37-
Date Serial Number GROUND. 329 401 403 411 ALWAYS USE GUARDS AND ANTI-KICKBACK DEVICES 401 107 106 152 406 404 405 408 138 412 410 409 402 151 101A 139 144 143 140 142 141 114 101B 137 108 102 103 128A
EXCERPT FROM THE Jobsite saw OWNERS MANUAL
Table and Fence Table and Fence Parts List 0 0 0 0 0 0 0 0 Table JSS-00 Fence Roller Pin (mm x mm) JSS-0 Rear Lock Down Screw for Insert JSS-00 0 mm O-Ring JSS-00 Extension Wing JSS-00 Fence Roller Wheel
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun
Makita Werkzeug Ges.m.b.H. Airportstr. 4, 2401 Fischamend Tel: / Fax: / Mail: Web:
Airportstr., 0 Fischamend Tel: 0 / 777 00 Fax: 0 / 777 00-0 Makita Service Information / Model: LB00F Seite / (c) 09 by Makita Austria. All Rights Reserved. Änderungen und Irrtümer vorbehalten / MSIO V.0
Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set
Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C2 02/2013
CATALOG OF REPLACEMENT PARTS
The Choice of Experience CATALOG OF REPLACEMENT PARTS MODELS 909A 919A 909E 919E 909M 919M SLICERS EFFECTIVE MARCH 2009 - 2 - Table of Contents 5 ELECTRICAL COMPONENTS (909A & 919A) 7 ELECTRICAL COMPONENTS
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112
M2 Assembly. M2 Sub-Assemblies mm Belt Sub-Assembly mm Belt Sub-Assembly Spider Sub-Assembly... 4
M2 Assembly Table of Contents M2 Sub-Assemblies... 3 630mm Belt Sub-Assembly... 3 702mm Belt Sub-Assembly... 3 Spider Sub-Assembly... 4 Idler Bolt Sub-Assembly... 8 Y Motor Sub-Assembly... 9 X Motor Sub-Assembly...
BUY PARTS ONLINE AT GRIZZLY.COM!
SECTION 9: PARTS Tables, Fence & Cutterhead 28 29 26 27 25 23 23 22 24 22 35 37 36 38 16 15 17 18 39 11 14 19 20 21 13 12 6 7 8 9 10 1 2 5 49 3 4 3 31 30 6 7 94 93 95 40 96 43 42 44 45 46 47 48 55 55-4
PARTS. Base Cabinet & Motor PARTS. Model W1745W (For Machines Mfd. Since 9/16) V2 22V2-3 22V2-4 22V2-1 22V2-2
Model W1745W (For Machines Mfd. Since 9/16) Base Cabinet & Motor 22V2-1 22V2-2 22V2-5 22V2-9 22V2-8 22V2-7 22V2-6 22V2-3 22V2-4 22V2 23 24 26 25 46 47 48 49 44 45 15 14 16 17 50 18 13 12 11 7 20 9 8 9
EMS-2025scl 230v. Sliding Compound Mitre Saw Fig.1. Revision Date 26/01/2006
Fig.1 Fig.2 701 inc 2,702,703,704 1 Base 93 089100102700 Space washer Base Assembly Parts (A) 30.23 94 Screw, for base, 45 152 Miter scale label, 2 089100102002 Rubber feet 0.10 702 Pivot Shaft & Screw
Model LS1018 Parts List A = Standard Equipment 〇 = Circuit Diagram
LS1018 7-14 103 104 105 106 97 99 100 110 109 63 85 96 200 107 90 2 199 108 37 89 91 92 93 94 31 74 75 73 140 70 121 15 254 255 113 215 236 116 114 115 196 258 195 118 197 119 259 117 203 253 67 95 112
ELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E936 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 4 20 (E1) 1 2 3 23 24 7 8 9 10 6 5 4 15 11 16 12 13 12 14 18 25 26 27 28 29 30 19 17 1 9 11 16 21 624 20 22 39 40 41 42 35
READ THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0656/P/PX/X ***IMPORTANT UPDATE*** For Machines Mfg. Since April, 2014 & Owner's Manual Printed September, 2009 The following changes were recently made to these machines since the
READ THIS FIRST Models G0544/G5850Z/ G5851Z/G7213Z
READ THIS FIRST Models // G5851Z/G7213Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 12/16 and Owner's Manual Revised 03/06 For questions or help with this product contact Tech Support at (570) 546-9663
SECTION 10: PARTS Body
-76- Model G0690/G0691 (Mfd. 6/15+) SECTION 10: PARTS 55V2 55-1 55-2 55-3V2 55-5 55-6 8 9 9 56 10 10 68 69 70 71 55-4 1 2 3 4 5 6 7 8 9 14 15 18 19 20 21 22 23 24 25 26 27 27 28 29 30 31 32 32 33 33 34
Parts Breakdown 2030N
Page 1 of 8 8/18/2010 Page 2 of 8 8/18/2010 Page 3 of 8 8/18/2010 Products with multiple versions are listed in subsiding order with the newest version on top not indented Fig # Part ID Part Name Quantity
SECTION 9: PARTS Cabinet & Base
SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370
8 x 5 PLANER THICKNESSER OPERATING INSTRUCTIONS MODEL: W588
8 x 5 PLANER THICKNESSER OPERATING INSTRUCTIONS MODEL: W588 Charnwood, Cedar Court, Walker Road, Bardon, Leicestershire, LE67 1TU Tel. 01530 516 926 Fax. 01530 516 929 Email; sales@charnwood.net website;
SECTION 9: PARTS G0513/G0513P/G0513ANV
SECTION 9: PARTS G0513/G0513P/G0513ANV Main 21 22 23 82-6 82-5 48 22 19 20 24 18 17 24 17 26 21 55 17 16 14 15 32 33 34 20 18 27 25 50 13 47 18 82-1 175 35 55A 49 9 11-1 10 46 45 11 12 44 176 39 38 37
Model W1739 Variable Speed Planer Moulder Manual Insert
Model W1739 Variable Speed Planer Moulder Manual Insert READ and understand this W1739 manual insert and the W1693 instruction manual before using this machine. Ignoring this warning may lead to serious
Main Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
SECTION 9: PARTS Table
SECTION 9: PARTS Table 26 27 25 24 23 28 33 31 22 30 21 29 34 32 20 35 19 36 18 15 16 17 37 35 36 39 30 13 8 14 11 12 38 10 40 34 29 9 54 53 56 52 41 51 42 50 43 49 17 3 46 48 44 2 7 4 6 5 46 45 47 4 1
SECTION 9: PARTS. G9860/G9860ZX Cabinet Breakdown & Parts List
MIN SECTION 9: PARTS G9860/G9860ZX Cabinet Breakdown & Parts List 9 33 34 5 11 237V4 236V2 10 23 32 17 12 13 16 POWER STOP 5000 15 14 17 31 27 35 30 17 26 3 1 33 34 1 P9860001 BASE 17 PS68M PHLP HD SCR
Model LS0815F Parts List A = Standard Equipment 〇 = Circuit Diagram
LS0815F 4-14 1 3 4 6 32 7 47 48 42 44 41 43 11 10 16 14 15 8 9 24 20 19 22 17 21 18 13 23 27 26 29 33 31 35 34 36 86 87 89 90 93 105 104 107 108 109 110 111 101 100 63 83 84 69 67 65 72 79 80 81 85 77
BASE, COLUMN, ARM AND TABLE
SPARE S LIST Item No. 700000 Article No. 84-2265 IMPORTANT INSTRUCTIONS It is most important that the above illustration be studied prior to the assembly of the saw blade and arbor or the assembly of the
Horizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-1018VM EHB-1018VMH
Operating Instructions and Parts Manual Horizontal Band Saw Models EHB-08VM EHB-08VMH JET 427 New Sanford Road LaVergne, Tennessee 37086 www.jettools.com Ph.: 855-336-4032 Part No. M-89070 REV B2 08/204
G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
Operation and Maintenance Instructions Geared Head Bench Lathe Models GHB-1340A, GHB-1440A
Operation and Maintenance Instructions Geared Head Bench Lathe Models GHB-1340A, GHB-1440A (GHB-1340A shown with optional stand 321443AK) For Parts List and Electrical Diagrams, see document M-321357A