EMS-2025scl 230v. Sliding Compound Mitre Saw Fig.1. Revision Date 26/01/2006
|
|
|
- Roberta Stone
- 5 years ago
- Views:
Transcription
1 Fig.1
2 Fig.2
3 701 inc 2,702,703,704 1 Base Space washer Base Assembly Parts (A) Screw, for base, Miter scale label, Rubber feet Pivot Shaft & Screw Pack (A) 3 Pivot shaft, Pivot Shaft & Screw Pack (A) Washer, Ø6 86 Screw B, M6 703 Miter Lock Set (A) 4 Bolt, M10x Miter Lock Set (A) 8 Tension spring B 87 Ball, Ø8 704 Support Wing Pack (A) Support Wing Pack (A) Support wing 154 Screw, M4x Working table Working Table & Scale Pack (A) Bevel Scale & Rivet (B) 150 Bevel scale label 153 Rivet, Ø2x3 712 Nuts/Screws Pack, for orientation (A) Nuts/Screws Pack, for orientation (A) Nut, M6 88 Hexagon socket screw, M6x Connection Shaft Pack (A) Connection Shaft Pack (A) Connection shaft, Hexagon socket screw, M4x Miter Pointer Assembly (A) 5 Miter pointer Miter Pointer Assembly (A) 7 Cross head screw, M4x Miter Handle Assembly (A) 9 Miter handle 611 Extension Nose Pack (B) Miter Handle Assembly (A) Cross head screw, M5x15 11 Flat washer, Ø5 12 Extension nose 716 Throat Plate Assembly (A) 14 Flat head screw, M4x Throat Plate Assembly (A) Left throat plate, ABS 142 Right throat plate, ABS 717 inc Fence w/scale (B) 17 Fence, YL Fence Assembly (A) Flat washer, Ø8 19 Spring washer, Ø8 20 Hexagon bolt, M8x Fence scale label 613 Knob Pack, for fence (C) Mitre lock Knob Pack, for fence (C) Knob 21 Miter lock knob
4 721 Pivot Plate Set (A) 61 Flat head screw, M8x12 62 Torsion spring B 63 Special screw C, M8x Nuts/Screws Pack, for lower blade guard (B) Pivot Plate Set (A) Flat washer, Ø5 59 Lock nut, M5 60 Pivot plate 65 Fix plate, for lower blade guard 72 Cross head screw, M5x Lower Blade Guard Set (A) 64 Lower blade guard, PC Lower Blade Guard Set (A) Roller 118 Lock ring 723 Link Plate Pack (A) 66 Washer Link Plate Pack (A) Link plate 68 Screw, M6 731 inc 110 & Motor Housing w/brush Holder (B) 111 Carbon brush holder 114 Motor housing 149 Hexagon socket screw, M5x Motor Housing Brush & Cover Screws Pack, for motor housing (C) Assembly (A) Flat washer, Ø5 47 Spring washer, Ø5 51 Cross head screw, M5x Motor End Cover Assembly (D) 113 Motor end cover 115 Tapping screw, ST4.2x Brush cover Carbon brush Stator Assembly (A) 633 Stator Pack (B) 11 Flat washer, Ø5 137 Screw, for lock stator, M5x Field Coil (Stator) Assembly (A) Stator 634 Stator Sub Pack (C) 147 Magnetic ring w/winding 148 Wind Plate 733 Output Shaft Assembly (A) 119 Bearing, RZ 120 Retaining ring, Ø Output Shaft Assembly (A) Output shaft, Key, 5x Retaining ring, Ø Gear 734 Armature Assembly (A) 125 Bearing, Armature (Rotor) Assembly (A) Armature 127 Bearing, Bearing bush
5 735 Gear Box Housing Assembly (A) 136 Motor front cover(gear box included shaft bush) 635 Nuts/Screws Pack, for gear box (B) Gear Box Housing Assembly (A) Cross head screw, M5x Nut, M5 138 Screw, M8 736 Handle Assembly (A) 129 Upper handle cover 130 Lower handle cover Handle Assembly (A) Screws Pack, for handle (B) Flat washer, Ø5 128 Tapping screw, ST4.2x Power cord, with BS plug Switch for laser Switch Capacitor Connection-peg male w/wire, for laser switch Transformer Pack, for electrical assembly (B) Transformer Pack, for electrical Transformer 146 assembly (B) Self tapping screw for transformer 638 Power Cord Protection Pack (C) 133 Protection tube Power Cord Protection Pack (C) Power cord clamp 157 Tapping screw, ST4x Inc 640,742,743,744,745,746,747, Blade guard 641 Nuts/Screws Pack, for blade guard pack Upper Guard Assy (A) Nut, M6 33 Hexagon socket screw, M4x10 56 Spring washer, Ø6 57 Hexagon socket screw, M6x Dust Adapter Set (B) 55 Dust adaptor Dust Adapter Set (B) Taping screw, ST4.2x Protection plate B 742 Blade Flange Assembly (A) 35 Hexagon bolt, L/H, M8x Blade Flange Assembly (A) Washer A, Ø8, for blade 37 Outer flange, Inner flange, Guard Protection Plate Assembly (A) Guard Protection Plate Assembly (A) Cross head screw, M4x15 38 Spring washer, Ø4 39 Protection plate A 744 Dust Protection Plate Assembly (A) Dust Protection Plate Assembly (A) Cross head screw, M4x15 96 Nut, M4 97 Transparent cover, PC 745 Shaft Assembly (A) 31 Torsion spring A Shaft Assembly (A) Sleeve B 34 Shaft A
6 746 Carry Handle Assembly (A) 51 Cross head screw, M5x Carry Handle Assembly (A) Carry handle set 157 Tapping screw, ST4x Blade Release Lock Assembly (A) 10 Cross head screw, M5x15 46 Mounting plate Spring washer, Ø5 Blade Release Lock Assembly (A) Spring, for blade release plate 49 Blade release knob 50 Blade release plate 748 Safety Knob Assembly (A) 7 Cross head screw, M4x15 38 Spring washer, Ø4 43 Safety Knob Assembly (A) Fix plate, for safety knob Torsion spring D 45 Safety knob 52 Screw, for safety knob, M4 166 Lock Nut, for safety knob, M4 751 Support Bracket Assembly (A) 73 Bearing, LM25UU 80 Support bracket(arm) 650 Connection Backlash Pack (B) 13 pin, 5x35 79 Connection backlash 651 Plates/Screws Pack, for support bracket 70 Cross head screw, M4x Support Bracket Assembly (A) Plate 77 Absorbing vibration pin 652 Knob & Screws Pack, for support bracket (D) 29 Nut, M6 69 Lock knob, for slide bar 71 Hexagon socket screw, M6x Pad Pack, for support bracket (E) 74 Pad A 75 Pad B 752 Support Bracket Locking Assembly (A) 81 Lock nut, M16 Support Bracket Locking Assembly Bevel lock knob 83 (A) Flat washer, Ø16 84 Flat washer, Ø Power Cord Clamp Assembly (A) 154 Screw, M4x Power Cord Clamp Assembly (A) Power cord clamp 156 Washer(big), Ø4 754 Bevel Pointer Assembly (A) Bevel Pointer Assembly (A) Flat head screw, M4x10 89 Bevel pointer
7 755 Lock Down Pin Assembly (A) 22 Lock down pin, Lock Down Pin Assembly (A) Spring, for lock down pin 24 Lock down pin cap 25 pin, 3x Laser Light Assembly (A) 26 Laser light Laser Light Assembly (A) Laser bracket 28 Hexagon socket screw, M4x Connection-peg female w/wire, for laser light 757 Slide Bar Guard Bracket Assembly (A) 13 pin, 5x35 15 Slide Bar Guard Bracket Assembly Bracket, for blade guard (A) Nut, M6 30 Hexagon bolt, M6x40 78 Sliding bar ~ Brand label 0.48 ~ Rating label 0.48 ~ Warning label 0.32 ~ Laser warning label 0.32 ~ Hand off label on lower blade guard 0.32 ~ Clamp workpiece label 0.32 ~ Miter table label (left) 0.65 ~ Miter table label (right) 0.65 Accessories Work Clamp Assembly (A) 98 Connection bar 99 Adjustable knob Work Clamp Assembly (A) Wing knob 101 Fix arm 102 Press plate 160 INC Extension bar 169 Orientation Unit & Adjustable Plate (D) 100 Wing knob Complete Extension Bar Assembly Extension wing(orientation plate) 107 (A) Adjustable plate 108 Adjustable plate cover 163 Flat washer(thick), Ø6 164 Rubber washer, Ø6 168 Nuts/Bolts Pack, for extension Bar assembly (C) 96 Nut, M Extension bar clamp pack Fix holder Cross head screw, M4x Blade 254mmx30mmx40T Dust bag Hex key 6mm Wrench
LISTA DE REFACCION MODELO LS1017L PAGINA 1. Pos. NUMERO DESCRIPCION Cant. NOTA
PAGINA 1 001 JM23100006 CROSS HEAD SCREW M5X20 2 002 JM23100007 FLAT WASHER 5 2 003 JM23100008 PAD 4 004 JM23100009 LOCKNUT M10 1 005 JM23100010 FLAT WASHER 10 2 006 JM23100300 BASE COMPLETE 1 INC. 7 007
LISTA DE REFACCION MODELO LS1018L PAGINA 1. Pos. NUMERO DESCRIPCION Cant. NOTA
PAGINA 1 001 JM23100006 CROSS HEAD SCREW M5X20 2 002 JM23100007 FLAT WASHER 5 2 003 JM23100008 PAD 4 004 JM23100009 LOCKNUT M10 1 005 JM23100010 FLAT WASHER 10 2 006 JM23100300 BASE COMPLETE 1 INC. 7 007
Model LS1018 Parts List A = Standard Equipment 〇 = Circuit Diagram
LS1018 7-14 103 104 105 106 97 99 100 110 109 63 85 96 200 107 90 2 199 108 37 89 91 92 93 94 31 74 75 73 140 70 121 15 254 255 113 215 236 116 114 115 196 258 195 118 197 119 259 117 203 253 67 95 112
RYOBI 10 in. (254 mm) COMPOUND MITER SAW MODEL NO. TS1352 REPAIR SHEET
RYOBI 0 in. (5 mm) COMPOUND MITER SAW MODEL NO. TS5 REPAIR SHEET FIGURE A 50 89 5 6 5 5 5 9 8 8 5 6 0 9 8 9 0 5 5 6 5 6 5 0 9 8 0 6 8 9 9 5 0 55 56 WARNING: Improper repair of a double insulated tool can
Model No. MLT100 TABLE SAW 255MM
Page 1 / 6 Page 2 / 6 Page 3 / 6 Page 4 / 6 Page 5 / 6 Page 6 / 6 Page 1 / 8 001 JM27000001 HEX.BOLT M10X35 4 002 JM27000002 SPRING WASHER 10 4 003 JM27000003 FLAT WASHER 10 4 004 JM27000004 CROSS HEAD
Model LS0815F Parts List A = Standard Equipment 〇 = Circuit Diagram
LS0815F 4-14 1 3 4 6 32 7 47 48 42 44 41 43 11 10 16 14 15 8 9 24 20 19 22 17 21 18 13 23 27 26 29 33 31 35 34 36 86 87 89 90 93 105 104 107 108 109 110 111 101 100 63 83 84 69 67 65 72 79 80 81 85 77
RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
ELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E936 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 4 20 (E1) 1 2 3 23 24 7 8 9 10 6 5 4 15 11 16 12 13 12 14 18 25 26 27 28 29 30 19 17 1 9 11 16 21 624 20 22 39 40 41 42 35
RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
RYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
2705 03-09 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 33 55 54
SPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 342186-7 SWITCH PROTECTOR 1 002 911118-1 PAN HEAD SCREW M4X12 6 003 155512-9 SWITCH PLATE 1 004 651757-2 SWITCH ABK266 1 006 685712-2 SPONGE SHEET 60X60 1 007 911118-1 PAN HEAD SCREW M4X12 1
SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
RYOBI 10 in. TABLE SAW MODEL NO. BTS16 REPAIR SHEET
RYOBI 0 in. TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A FIGURE E FIGURE H FIGURE C FIGURE D 0 0 FIGURE B 0 0 NOTE A WARNING: Improper electrical repair of the table saw can result in damage to the drive
Parts List for Type 1
1 422190430001 FENCE BODY 1 2 901010600677 CAP SCREW 2 3 904010331451 WASHER 3 4 901010600605 CAP SCREW 2 5 904010101604S STEEL WASHER 2 6 422040105002 REAR SLIDE BLOCK 1 7 905040714459 STEEL PIN 1 8 928010414118
MODEL RA-200N RADIAL ARM SAW
ITEM NO PART NO DESCRIPTION PRICE 1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900079 CONICAL SPRING 16.3 X 31.5 X 1.2 0.78 3 6940444 OUTER FLANGE 4.49 4 6940443 INNER FLANGE 4.91 5 6100509 PARALLEL
Note: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours, www.waltermeier.com). Having the Model Number
MODEL RA-2500N RADIAL ARM SAW
1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900549 WASHER 1.78 3 6080529 ARBOR COLLAR 31.02 4 6760117 OILLESS METAL 1.57 5 9270612 CLAMP SCREW M6 X 12 0.19 6 9220625 HEX. SOCKET HEAD BOLT M6 X 25 0.22
Parts Breakdown LS1212. Page 1 of 6 2/13
Page 1 of 6 2/13 Page 2 of 6 2/13 Products with multiple versions are listed in subsiding order with the newest version on top not indented Fig # Part ID Part Name Quantity 1 911373-5 P.H. SCREW M6X50,
SERVICE PARTS LIST MOTOR ARM/LOWER GUARD ASSEMBLIES SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 7.25" MITER SAW
0 Component Parts (Small #) Are Included When Ordering The Assembly (Large #). 3 4 67 5 49 628 MOTOR ARM/LOWER GUARD ASSEMBLIES SPECIFY AND NO. WHEN ORDERING PARTS 4 5 3 8 7 50 49 Page Page 2 Page 3 Page
25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
Parts Breakdown Page 1 of 13 2/13
Page 1 of 13 2/13 Page 2 of 13 2/13 Page 3 of 13 2/13 Page 4 of 13 2/13 Page 5 of 13 2/13 Page 6 of 13 2/13 Page 7 of 13 2/13 Products with multiple versions are listed in subsiding order with the newest
SECTION 10: PARTS Body
-76- Model G0690/G0691 (Mfd. 6/15+) SECTION 10: PARTS 55V2 55-1 55-2 55-3V2 55-5 55-6 8 9 9 56 10 10 68 69 70 71 55-4 1 2 3 4 5 6 7 8 9 14 15 18 19 20 21 22 23 24 25 26 27 27 28 29 30 31 32 32 33 33 34
EXCERPT FROM THE Jobsite saw OWNERS MANUAL
Table and Fence Table and Fence Parts List 0 0 0 0 0 0 0 0 Table JSS-00 Fence Roller Pin (mm x mm) JSS-0 Rear Lock Down Screw for Insert JSS-00 0 mm O-Ring JSS-00 Extension Wing JSS-00 Fence Roller Wheel
Model No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW
PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135
No. Part no. Name *LARGE FLAT WSHER 6 10PK KNOB *BLUE WASHER 5 JS PK HANDLE
1 No. Part no. Name 10 253010-8 *LARGE FLAT WSHER 6 10PK 100 271423-1 KNOB 32 2704 101 267010-2 *BLUE WASHER 5 JS1660 10PK 103 271073-2 HANDLE 100 2704 104 224347-0 OUTER FLANGE 53 2704/.2702 105 252155-9
Parts Breakdown Page 1 of 12 2/13
Page 1 of 12 2/13 Page 2 of 12 2/13 Page 3 of 12 2/13 Page 4 of 12 2/13 Page 5 of 12 2/13 Page 6 of 12 2/13 Products with multiple versions are listed in subsiding order with the newest version on top
Note: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours, www.waltermeier.com). Having the Model Number
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27B
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS = Part number change from previous service
Makita Werkzeug Ges.m.b.H. Airportstr. 4, 2401 Fischamend Tel: / Fax: / Mail: Web:
Airportstr., 0 Fischamend Tel: 0 / 777 00 Fax: 0 / 777 00-0 Makita Service Information / Model: LS08L Seite / (c) 08 by Makita Austria. All Rights Reserved. Änderungen und Irrtümer vorbehalten / MSIO V.0
Model W1819/W1820 (Mfg. Since 09/11) PARTS. Body V V PARTS -79-
-79- Model W1819/W1820 (Mfg. Since 09/11) 155V2 155-1 155-2 155-3V2 155-6 155-5 108 109 109 156 110 110 168 169 170 171 101 102 103 104 105 106 107 108 109 114 115 118 119 120 121 122 123 124 125 126 127
SECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
SECTION 8: PARTS Main Parts Breakdown
SECTION 8: PARTS 10 Main Parts Breakdown 6 1 7 9 2 4 8 15 60 61 62 63 64 110 11 12 13 18 19 21 17 22 23 24 27 14 25 34 65 35 66 67 83 84 36 37 68 69 85 70 80 86 38 73 81 87 89 82 90 71 72 74 91 79 88 92
Repair Parts. Parts List for RIDGID 10 Inch Table Saw Model No. TS Figure 1. RIDGID parts are available on-line at
Parts List for RIDGID 0 Inch Table Saw Model TS00 Figure 0 0 0 0 See Figure 0 See Figure 0 See Figure Parts List for RIDGID 0 Inch Table Saw Model TS00 Figure Always Order by Part Number - not by Number
Parts Breakdown 2030N
Page 1 of 8 8/18/2010 Page 2 of 8 8/18/2010 Page 3 of 8 8/18/2010 Products with multiple versions are listed in subsiding order with the newest version on top not indented Fig # Part ID Part Name Quantity
SECTION 10: PARTS. Body
SECTION 10: PARTS Body 1 P0715P001 EXTENSION WING 17 PS14M PHLP HD SCR M6-1 X 12 2 PCAP88M CAP SCREW M10-1.25 X 25 18 PLW03M LOCK WASHER 6MM 3 PLW06M LOCK WASHER 10MM 19 PWF06M FENDER WASHER 6MM 4 PW04M
Record the serial number and date of purchase in your manual for future reference.
10 Woodworking Bandsaw Model: 10-305 Parts List Record the serial number and date of purchase in your manual for future reference. Serial number: Date of purchase: Part # 10-305PL1 For more information:
G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
J-3-D PART NO DATE:
37-380 & 37-877 8 PROFESSIONAL JOINTER J-3-D PART NO. 909563 DATE: 05-12-04 Page1/ J-3-D /DEB REPLACEMENT PARTS * 1345487 CUTTERHEAD ASSY, INCL: 1 1340196 KNIFE SCREW 2 1345488 BAR 3 37-355 KNIVES (SET
RECIPRO SAW MODEL JR3000V 01-03
RECIPRO SAW MODEL JR3000V 0-03 3 6 7 5 67 8 9 3 0 4 6 66 8 9 0 7 7 3 4 5 6 65 7 8 9 3 3 70 33 34 36 6 37 38 39 4064 4 4 6 59 58 47 46 57 56 48 49 55 5 53 4 73 74 Item Part Qty. Item Part Qty... Used Description..
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112
SECTION 9: PARTS G0513/G0513P/G0513ANV
SECTION 9: PARTS G0513/G0513P/G0513ANV Main 21 22 23 82-6 82-5 48 22 19 20 24 18 17 24 17 26 21 55 17 16 14 15 32 33 34 20 18 27 25 50 13 47 18 82-1 175 35 55A 49 9 11-1 10 46 45 11 12 44 176 39 38 37
Upper Wheel Assembly Index No. Part No. Description Size Qty
Upper Wheel Assembly 1... JWBS16B-101...Saw Body... 1 2... TS-0152011...Carriage Bolt...5/16-18x1... 6 3... JWBS18-103...Upper Wheel Bracket... 2 4... TS-0680031...Flat Washer...5/16... 6 5... TS-0720081...Lock
Main Parts. -6- Model G0555LA35 (Mfd. Since 10/17) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 48 62 16 61V2 50 51 55 56 57 70 49 69 64 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34 194 186 6 68 24 115 116
Model PLM5113N PETROL LAWN MOWER
Strana 1 / 2 Strana 2 / 2 Strana 1 / 4 001 671006065 "BLADE TIGHTEN BOLT 3/8""24" 1 002 671010730 LID SHAPE WASHER 1 003 DA00000973 BLADE 510MM 1 004 671015252 BLADE SUPPORT 1 005 DA00000535 FLAT KEY 1
Main Breakdown. ST " Bandsaw -41-
Main Breakdown ST1000 14" Bandsaw -41- Main Breakdown Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 XST1000001 MOTOR 3/4HP 110/220V 48 XPHTEK4M TAP SCREW M4 X 8 1-1 XST1000001-1 FAN COVER
Makita Werkzeug Ges.m.b.H. Airportstr. 4, 2401 Fischamend Tel: / Fax: / Mail: Web:
Airportstr., 0 Fischamend Tel: 0 / 777 00 Fax: 0 / 777 00-0 Makita Service Information / Model: LB00F Seite / (c) 09 by Makita Austria. All Rights Reserved. Änderungen und Irrtümer vorbehalten / MSIO V.0
Replacement Parts. Parts List: Body Assembly
Replacement Parts To order parts or reach our service department, call 1-800-274-6848, Monday through Friday (see our website for business hours, www.powermatic.com). Having the Model Number and Serial
TP1300 OWNERS MANUAL 13 INCH THICKNESS PLANER WITH LEGSET. For Your Safety: Read all instructions carefully Save this manual for future referenece
TP00 OWNERS MANUAL INCH THICKNESS PLANER WITH LEGSET For Your Safety: Read all instructions carefully Save this manual for future referenece SP Printed in Taiwan Parts List for " Thickness Planer Model
Model G " Planer/Moulder -33- G0477 Body Breakdown
Model G0477 15" Planer/Moulder -33- G0477 Body Breakdown 202 200 201 203 204 194 192 193 195 205 141 143 196 197 142 148 146 178 183 154 155 198 199 144 145 153 157 159 158 181 182 188 185 184 187 186
Spare part list. piece rotor 220/240V SERVICE. piece brush holder 220V/240V assy 7. piece electronics 230V assy. piece protective sleeve DM10 9
cid_etlx V. 0. FEHRMAN For information only, will not be exchanged when altered! Date.05.003 09:39 Cnt-no 38 piece stator 0/0V SERV. 5 3 piece rotor 0/0V SERVICE 009 piece brush holder 0V/0V assy 7 3 piece
Note: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 between 7:30am and 5:30pm (CST), Monday through Friday. Having the Model Number and Serial Number of
PARTS Stand Breakdown
PARTS Stand Breakdown 35-5 35-2 35-4 63 1 2 3 4 5 35-1 35-3 36 37 38 39 35 34 33 32 30 28 6 7 8 21 29 23 22 27 26 25 24 42 43 44 45 46 47 9 10 62 61 60 51 11 59 19 18 12 12 13 58 14 57 15 56 55 54 53 52
SECTION 9: PARTS. Table. Spiral Cutterhead For Model G0452Z Cutterhead For Models G0452/P Model G0452/P/Z (Mfg.
SECTION 9: PARTS Table 17 18 19 87 86 21 262-3 262-1 262-2 27 28 29 30 22 23 24 35 36 37 38 262 25 26 2 13 Cutterhead For Models G0452/P 10 45 12 13 7 8 9 50A 6 11 31 14 15 16 12 13 81 82 83 84 32 85 33
G5959Z 12" Left-Tilting Table Saw -37-
Date Serial Number GROUND. 329 401 403 411 ALWAYS USE GUARDS AND ANTI-KICKBACK DEVICES 401 107 106 152 406 404 405 408 138 412 410 409 402 151 101A 139 144 143 140 142 141 114 101B 137 108 102 103 128A
PARTS. W1669 & W1670 Parts PARTS. Model W1669/W1670 (For Machines Mfd. Since 04/18) 66V A A A 28A
W1669 & W1670 Parts 23 66V2 22 21 25 26 53A 62 63 89 64 9 65 24 20 15 16A 54 93 10 16A-1 81 77 94 53 79 102 103 28 36 8 30 19 31 32 32-1 109 28A 28 27 34 33 56 49 76 76 19-3 19-1 19-2 38-1 89 35 60 59
PARTS LIST CHARGER 2716 DB
PARTS LIST CHARGER 2716 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495381 LEFT OUTER BEARING / PIVOT MOUNT 1 102 9121450 5/16-18 HEX NUT WITH NY-LOK INSERT - PACK OF 5 4 103 9121210 1/4-20 X 5/8 HEX BOLT
ST1014 PARTS ST1014 Headstock Breakdown
ST1014 PARTS ST1014 Headstock Breakdown 112 114 23 104 105 108 102 106 20 19 21 22 101 100 103 111 38 14 15 37 46 44 47 45 107 93 39 41 40 67 110 109 74 75 76 11 12 13 9 8 6 10 31-2 31-3 3 2 7 26 24 31-1
EXPLODED PARTS LIST VSS 60
Page(s): / ENGINE Page(s): / No Code Name Qty No Code Name Qty 05083 Handle assembly 05076 Connecting rod 3 Box Hex locking nut M8 7 5 Washer 8xx 6 Hex locking nut M6 7 T bolot M8x 8 Pin with hole 9 0506
Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040
Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com
Main SECTION 10: PARTS
Main SECTION 10: PARTS Main Parts List 3 P0732003 MITER GAUGE ASSEMBLY 37 P0732037 TRANSFER PULLEY 3-1 P0732003-1 MITER GAUGE HANDLE 38 PR05M EXT RETAINING RING 15MM 3-2 PW01M FLAT WASHER 8MM 39 P6002-2RS
Disc, Belt, and Combination Disc/Belt Sanders
This Manual is Bookmarked Operating Instructions Parts Manual Disc, Belt, and Combination Disc/Belt Sanders Models: 4200A, 4300A, 4400A 4200A Disc/Belt Sander 4300A 6 Inch Belt Sander 4400A 12 Inch Disc
Operating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
535-Manual. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine -Manual Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 0 Cutter Assembly Stop Pin 0 Pin Reamer Assembly Carriage Assembly 0 Stop Screw
MODEL NO.: MI PARTS BREAKDOWN
MODEL NO.: MI-76350 PARTS BREAKDOWN MAGNUM DRILL PRESS ASSEMBLY INSTRUCTIONS MODEL MI-76350 Before you begin to assemble your drill press, review the parts breakdown and keep it ready for reference. Start
MODEL NO.: MI / 42100
MODEL NO.: MI-50 / 00 MODEL NO.: MI-50 BOX 1 OF 6 ROUTER LIFT PARTS BREAKDOWN Router Lift Assembly 6 5 2 2 1 5 5 8 12 11 2 26 27 0 12 26 27 27 22 22 27 19 A 5 26 12 26 22 25 25 7 18 18 15 15 7 9 1 17 2
Assembly Diagram for DH 50MB
Assembly Diagram for --- 1 --- CODE 1 313-415 FRONT CAP 1 2 318-608 GRIP 1 3 318-590 STOPPER RING 1 4 313-413 NEEDLE HOLDER 1 5 313-419 RETAINER SPRING 1 6 318-589 SPRING HOLDER 1 7 880-810 NYLOCK HEX.
Spare part list. piece rotor 110/115V assy. piece motor housing assy. piece stator 115V assy 8. piece grip frame assy 14. piece clutch gear assy 15
cid_etlx V. 0. FEHRMAN For information only, will not be exchanged when altered! Date 8.09.00 0:0 Cnt-no 7369 piece gear housing assy 73730 piece motor V assy 3 73690 piece cylinder 7368 piece motor housing
Symptom Possible Cause Correction. Motor will not start Low voltage. Check power line for proper voltage. Open circuit in motor or loose connection.
Saw blade Blade guard Troubleshooting Symptom Possible Cause Correction Motor will not start Low voltage. Check power line for proper voltage. Open circuit in motor or loose connection. Inspect all lead
SECTION 10: PARTS G1023RL
SECTION 10: PARTS 131 132 133 G1023RL (All) Main 121 118 119 128 126 125 124 123 124 122 120 119 128 116 6V2 5 4V2 4-1 129 127 128 117 26V3 26-3V2 26-1 6-2 (G1023RLWX) 26-2 26-4V3 7 6-1 1 (G1023RL) 19-1
Model W1837 (For Machines Mfd. Since 8/18) PARTS. Main PARTS -83-
-83- Main 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 113 96 90 91 92 93 95 96 97 98 100 101 102 103 104 105 106 109
Makita Werkzeug Ges.m.b.H. Airportstr. 4, 2401 Fischamend Tel: / Fax: / Mail: Web:
Airportstr., 0 Fischamend Tel: 0 / 777 00 Fax: 0 / 777 00-0 Makita Service Information / Model: LS08L Seite / (c) 09 by Makita Austria. All Rights Reserved. Änderungen und Irrtümer vorbehalten / MSIO V.0
SECTION 9: PARTS G0453Z
parts breakdown SECTION 9: PARTS G0453Z Headstock Breakdown 4 3 2 20 26 104 21 19 23 22 24 99 97 98 25 94 95 93 14 15 39 40 107 86 41 42 45 62 30 66 61 60 13 9 10 12 11 27 31 33 34 35 73 77-1 77 36 3738
Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
Spare part list. motor housing. piece. piece. stator 110V-120V assy 3. piece. rotor V assy 4. gear housing. piece. guide plate assy 6.
cid_etlx V. 7. BECKDOR For information only, will not be exchanged when altered! Date 0.0.00 08:3 Cnt-n 3700 motor housing 36373 stator 0V-0V assy 3 36379 rotor 0-0V assy 369 gear housing 366 guide plate
SECTION 9: PARTS. Main Breakdown -36- Model G5394 (Mfd. Since 11/08)
SECTION 9: PARTS Main Breakdown 105 137 136 113-1 113 141 140 113-2 113-3 111 113-4 114 135 143 144 101 121-1 -1 116 147-1 121-2 115 120 121 107 108 164 162 160 158 138 109 127 126 160 158 123 127 123
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
Model No: SM2502. Parts Information: Mini Drilling & Milling Machine
Page 1 of 6 Page 2 of 6 Page 3 of 6 1 SM2502.001 BASE 2 SM2502.002 X-AXIS FEEDING SCREW -- SM2502.002-1 KEY 4x16 4 SM2502.004 DIAL 5 SM2502.005 HAND WHEEL 6 SN8.S STEEL NUT M8 ZINC DIN934 (SINGLE) 7 SM2502.007
Parts Catalog Collector 34 Model Battery
Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-20)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering B (97104855)... 10 Travel drive, part 1
Parts Catalog Collector 34 Model Gasoline
Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-10)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering V (97104640)... 10 Travel drive, part 1
MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT
MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT The Model G0760 is the same machine as the Model G0705 except the Model G0760 has an X-axis table power feed. Except for the differences
SECTION 9: PARTS G0514X
SECTION 9: PARTS G0514X Main 48 23 24 21 55 17 19 22 24 50 49 3 22 26 17 21 15 14 16 13 46 47 10 32 7 38 33 3435 37 12 44 45 41 42 43 11 40 8 39 165 166 1 11-1 29 30 25 28 26 27 5 4 58 57 64 65 56 68 62
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL X13 SERIES SLICER FORM 43180 Rev. A (April 2013) F-43180 Rev. A (April 2013) - 2-2013 Table of Contents 5 ELECTRICAL COMPONENTS 7 RING GUARD AND CENTER PLATE 9 ARM ASSEMBLY
SECTION 9: PARTS Main
63 58 62 61A 66 65 67 66 67 58 58 59 64 SECTION 9: PARTS 162 161 Main 160 45 152 21 20 17 153 166 33 30A 31 32 135 144 133 136 34 35-2 35-3 131 16 130 134 139 15 35-1 137 14V2 151 140 38 143 150 18 142
SECTION 9: PARTS. G7947 Stand & Table Breakdown 4V2
SECTION 9: PARTS G7947 Stand & Table Breakdown 19 15 21 18 16 17 112 5 113 3 14 8 7 6 6-1 13 4V2 12 116 11 9 10 2 114 115 1 We do our best to stock replacement parts when possible, but we cannot guarantee
SECTION 9: PARTS Jointer Breakdown
Model G0490/G0490X (Mfd. Since 8/12) -49-1 3 8 7 9 12 14 15 16 18 21 23 24 24 28 29 32 33 37 38 38 44 45 49 50 51 53 55 56 57 58 59 61 60 64 65 66 68 72 75 80 81 82 83 84 85 86 87 88 90 91 92 94 93 96
8 x 5 PLANER THICKNESSER OPERATING INSTRUCTIONS MODEL: W588
8 x 5 PLANER THICKNESSER OPERATING INSTRUCTIONS MODEL: W588 Charnwood, Cedar Court, Walker Road, Bardon, Leicestershire, LE67 1TU Tel. 01530 516 926 Fax. 01530 516 929 Email; sales@charnwood.net website;
Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun
CATALOG OF REPLACEMENT PARTS
The Choice of Experience CATALOG OF REPLACEMENT PARTS MODELS 909A 919A 909E 919E 909M 919M SLICERS EFFECTIVE MARCH 2009 - 2 - Table of Contents 5 ELECTRICAL COMPONENTS (909A & 919A) 7 ELECTRICAL COMPONENTS
TECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 11 Model No. Description CONCEPT AND MAIN APPLICATIONS Specification Standard equipment TCT saw blade... 1 Rear table set (exclusively Europe, Turkey, South Africa..1 2704 This
Record the serial number and date of purchase on your parts list for future reference.
Jointer Model: 0-0 Parts List Record the serial number and date of purchase on your parts list for future reference. Serial number: Date of purchase: Part # 0-0PL For more information: www.rikontools.com
Parts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP20 & SPC20 SP20 0--2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
Parts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP0 & SPC0 SP0-3-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HS4N SLICER ML-136338 HS4N A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43311 (August 2015) F-43311 (August 2015) - 2 - HOBART 2015 Table of Contents