Collet Mandrels 15. Registered trade mark of RINGSPANN GmbH, Bad Homburg
|
|
- Barrie Hunt
- 5 years ago
- Views:
Transcription
1 Mandrels 1 RINGSPANN Registered trade mark of RINGSPANN GmbH, Bad Homburg
2 Flange Mandrels Advantages High concentricity up to 0,01 Rapid changeover to other clamping diameters Pull-back action during clamping; axial backstops adapted to workpiece geometry can be manufactured by the customer or on request by RINGSPANN Large expansion range of collets from: 0, for the size 1,2 for the sizes ,4 for the sizes 2-4 Fine size gradations to cover all clamping diameters between, and 2, with flange mandrel bodies and collets diameters up to 1 available from stock Higher clamping diameters up to available on request Standard series for balancing machines (see catalogue 1.1) s secured against rotation on request Screw plate Hand clamping bolt Characteristics For hand- or power-clamping. Consists of flange mandrel body with screw plate and collet with clamping bolt. The flange mandrel body requires a screw plate for hand-clamping. For power-clamping please remove the screw plate. Power clamping Technical Data and Dimensions See pages 4 and. Flange mandrel body Axial backstop (by customer) Issue 07/04 We reserve the right to make technical modifications. 2
3 Centre Mandrels Advantages High concentricity up to 0,01 Rapid changeover to other clamping diameters Pull-back action during clamping; axial backstops adapted to workpiece geometry can be manufactured by the customer or on request by RINGSPANN Large expansion range of collets from: 0, for the size 1,2 for the sizes ,4 for the sizes 2-4 Fine size gradations to cover all clamping diameters between, and 2, with centre mandrel bodies and collets diameters up to 1 available from stock Higher clamping diameters up to available on request Characteristics For hand- or power-clamping. Consists of centre mandrel body and collet with clamping nut. Circlip groove DIN 471 for axial backstop nut Technical Data and Dimensions See pages and 7. Centre mandrel body Axial backstop (by customer)
4 Flange Mandrels Flange mandrel body V Z (4 x ) DIN 74-1, Series bolt L ø A h K S (Across flats) ø R h ø T ø J G ø D f7 E Screw plate H Y (4X ) P Q N Technical Data and Dimensions Flange mandrel body with screw plate 1. with clamping bolt range D f7 Transmissible torque Mm 1) Mo 2) Nm Nm Necessary actuating on the clamping bolt A E Drawbar Actuating force torque F M N Nm G H J K max. stroke L N P Q R S T V Y Z MDF MBB, - 1, M 7 7, 0 M MDF MBB 7, -, 000 M M MDF 0.00 MBB, - 27, M M MDF MBB 1 27, - 2, M M MDF MBB 1 2,0-42, M 0 1 M MDF MBB 27 42,0-1, M 0 1 M MDF MBB 2 1,0-4, M M MDF MBB 4,0-72, M M MDF MBB 44 71,0-2, M M MDF MBB 4 1,0-2, M M 1) with axial backstop 2) without axial backstop Workpiece The clamping surface of the workpiece must not be positioned completely within the area of dimension L.The larger portion of the clamping surface should be positioned over the tapered section of the flange mandrel body. The workpiece can either be positioned directly against the flange mandrel body or against a special axial backstop designed to fit the workpiece geometry. Axial backstop can be manufactured by customer or on request by RINGSPANN. 4
5 Flange Mandrels of collets with clamping bolt MBB, -, , MBB 27 42,0-4, ,0 MBB 4 1,0-4, ,0,40 -, ,40 4,0-44, ,0,0 -, ,0, -, , 44,0-4, ,0,0 -, ,0,40 -, ,40 4,0-4, ,0 7,0 -, ,0, -, , 4,0-47, ,0,0-2, ,0,40-1, ,40 47,0-4, ,0 1,0-4, ,0 MBB 7, - 1, , 4,0 -, ,0,0 -, ,0 1, - 1, ,,0-0, ,0,0 -, ,0 1, - 17, , 0,0-1, ,0 7,0-0, ,0 17, - 1, , MBB 2 1,0-4, ,0,0-2, ,0 1, - 1, ,,0 -, ,0 1,0-4, ,0 1, -, ,,0 -, ,0,0 -, ,0 MBB, - 21, , 7,0-0, ,0,0 -, ,0 21, -, ,,0-2, ,0 7,0-0, ,0, - 2, , 1,0-4, ,0,0-1, ,0 2, - 24, , MBB 4,0 -, ,0 1,0-1, ,0 24, - 2, ,,0 -, ,0,0 -, ,0 2, - 2, , 7,0 -, ,0,0 -, ,0 2, - 27, ,,0-72, ,0 7,0-0, ,0 MBB 1 27, - 2, , MBB 44 71,0-74, ,0,0-2, ,0 2, - 2, , 7,0-7, ,0 1,0-4, ,0 2, -, , 7,0-7, ,0,0 -, ,0,0-1, ,0 77,0-0, ,0,0 -, ,0 1,0-2, ,0 7,0-2, ,0 7,0-1, ,0 MBB 1 2,0 -, ,0,0-2, ,0,0-4, ,0 4,0 -, ,0,0 -, ,0,0-7, ,0 7,0 -, ,0,0 -, ,0,0-40, ,0 40,0-41, ,0 41,0-42, ,0 Example for ordering for clamping diameter 17 Infomation by ordering Item Flange mandrel body with screw plate MDF with clamping bolt MBB ,
6 Centre Mandrels Circlip groove DIN 471 for axial backstop Centre mandrel body K L nut ø A h G ø D f7 P Q E H S (Across flats) N Tecnical Data and Dimensions Centre mandrel body 20. with clamping bolt range D f7 Transmissible torque Mm 1) Mo 2) Nm Nm Tightening torque required at clamping nut M Nm A E G H K max. stroke L N P Q S MDS MBM, - 1, M x 0,,7 7, MDS MBM 7, -, 7 M x 0, MDS MBM, - 27, M x MDS MBM 1 27, - 2, M x MDS MBM 1 2,0-42,0 1 7 M 1 x 1, MDS MBM 27 42,0-1, M 1 x 1, MDS MBM 2 1,0-4, M 24 x 1, MDS MBM 4,0-72, M 24 x 1, MDS MBM 44 71,0-2, M x 1, MDS MBM 4 1,0-2, M x 1, ) with axial backstop 2) without axial backstop Workpiece The clamping surface of the workpiece must not be positioned completely within the area of dimension L.The larger portion of the clamping surface should be positioned over the tapered section of the flange mandrel body. The workpiece can be positioned against a special axial backstop designed to fit the workpiece geometry. Axial backstop can be manufactured by customer or on request by RINGSPANN.
7 Centre Mandrels of collets with clamping nut MBM, -, , MBM 27 42,0-4, ,0 MBM 4 1,0-4, ,0,40 -, ,40 4,0-44, ,0,0 -, ,0, -, , 44,0-4, ,0,0 -, ,0,40 -, ,40 4,0-4, ,0 7,0 -, ,0, -, , 4,0-47, ,0,0-2, ,0,40-1, ,40 47,0-4, ,0 1,0-4, ,0 MBM 7, - 1, , 4,0 -, ,0,0 -, ,0 1, - 1, ,,0-0, ,0,0 -, ,0 1, - 17, , 0,0-1, ,0 7,0-0, ,0 17, - 1, , MBM 2 1,0-4, ,0,0-2, ,0 1, - 1, ,,0 -, ,0 1,0-4, ,0 1, -, ,,0 -, ,0,0 -, ,0 MBM, - 21, , 7,0-0, ,0,0 -, ,0 21, -, ,,0-2, ,0 7,0-0, ,0, - 2, , 1,0-4, ,0,0-1, ,0 2, - 24, , MBM 4,0 -, ,0 1,0-1, ,0 24, - 2, ,,0 -, ,0,0 -, ,0 2, - 2, , 7,0 -, ,0,0 -, ,0 2, - 27, ,,0-72, ,0 7,0-0, ,0 MBM 1 27, - 2, , MBM 44 71,0-74, ,0,0-2, ,0 2, - 2, , 7,0-7, ,0 1,0-4, ,0 2, -, , 7,0-7, ,0,0 -, ,0,0-1, ,0 77,0-0, ,0,0 -, ,0 1,0-2, ,0 7,0-2, ,0 7,0-1, ,0 MBM 1 2,0 -, ,0,0-2, ,0,0-4, ,0 4,0 -, ,0,0 -, ,0,0-7, ,0 7,0 -, ,0,0 -, ,0,0-40, ,0 40,0-41, ,0 41,0-42, ,0 Example for ordering for clamping diameter 2 Information by ordering Item Centre mandrel body MDS with clamping nut MBM , 7
8 Freewheels Backstops Automatic protection against reverse running of conveyor belts, elevators, pumps and fans. Indexing Freewheels For gradual feed of materials. Overrunning Freewheels Automatic engaging and disengaging of drives. Catalogue Catalogue 0 Industrial Disc Brakes Manual Activated Manual Release. Catalogue 4 Freewheel Elements Cage Freewheels, Sprag Sets and Freewheel Chains. Catalogue 0 Housing Freewheels Automatic engaging and disengaging for multi-motor drives for installations with continuous operation. Catalogue 0.1 Industrial Disc Brakes Spring Activated Pneumatical, Hydraulical, Electromagnetical or Manual Release. Industrial Disc Brakes Pneumatical Activated Spring Release. Industrial Disc Brakes Hydraulical Activated Spring Release. Fail-Safe Units For secure and precise positioning of piston rods. Catalogue 4 Catalogue 4 Catalogue 4 Catalogue 2 Catalogue Brakes Torque and Force Limiters Torque Limiter with Screw Face Reliable overload protection for tough operating conditions. Torque Limiter with Rollers With double or single Roller. Through ratcheting or disengaging, also for synchronous running. Torque Limiter with Spherical Rollers Reliable overload protection with maximum response accuracy. Also backlash free. Torque Limiter with Friction Linings RIMOSTAT Torque Limiter for constant torque. Belleville Spring Torque Limiter for simple release. Force Limiter Reliable axial overload protection in piston rods. Catalogue 4 Catalogue 4 Catalogue 4 Catalogue 4 Catalogue Flange couplings Rigid, easily removable shaft coupling with no clearance cone clamping elements. HELICAL-Flexures Shaft Couplings Design to meet requirements for specific applications. Connecting components can be integrated to save space. Catalogue 4 HELICAL-Flexures Spring Elements Single Spring element with maximum resistance to wear. Coupling For the automatic coupling of rolls. Fast, safe and free from slipping connection. Couplings Flexible Couplings Large, safe radial and angular misalignements. Minimum resiliency. Catalogue 44 Catalogue 4 Cone Elements For shaft-hub connections. High torques with small dimensions. Two-part Shrink Discs External clamping connection. Advantages: Simple, secure mounting even without torque wrench. Three-part Shrink Discs External clamping connection for the fastening of hollow shafts on solid shafts Star Discs Ideal for shaft-hubconnection for frequent release. Star Spring Washers Axial spring elements for preloading of ball bearings. Catalogue 1 Catalogue 1.1 Catalogue 1 Catalogue Catalogue Special Fixtures Custom made solutions for specific clamping problems. Mandrels Universal, cost effective standard series. Fast collet change to other clamping diameters. Hydraulic Expanding Tools Mandrels and chucks with high concentricity. several workpieces in one process possible. Catalogue 1 Catalogue 1 Precision Fixtures Standard Parts for Fixtures The RINGSPANNSystem for the manufacture of your own precision clamping fixtures. Standard Fixtures Standard prograe in high precision, ready manufactured chucks and mandrels. Catalogue Catalogue Schaberweg 4 4 Bad Homburg Telefon Telefax internet: mailbox@ringspann.com 1e Steigerwald Druck Printed in Germany Shaft-Hub-Connection
Safety Clamping Units 32
Safety Clamping Units 32 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg RINGSPANN Safety Clamping Units Description The safety clamping unit System RINGSPANN is an automatic and precise
More informationCLAMPING TECHNOLOGY Individual special clamping tools
CLAMPING TECHNOLOGY Individual special clamping tools 1 QUALITY SINCE 1958 Know-how, the highest quality and first class engineering. We see ourselves as a system supplier and offer our customers a full
More informationExcellent Clamping. Mechanical Clamping Devices
Excellent Clamping Mechanical Clamping Devices Precise Mechanical Clamping Devices for All Requirements Experience in clamping technology For decades, König-mtm has been one of the leading manufacturers
More informationClamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
More informationShaft coupling: compensation of mismatching shaft ends (see page B 117) Flange bearing: linear drive bearing (see page B 96)
Overview Linear Drives At the employment of linear drives, the directly or via a toothed belt driven spindle is the most frequently applied variant. Motor flange bearing End flange bearing (two angular
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter
More informationTOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function
More informationPATENT EP COMPENSATING CHUCKS OVEKA & KA
PATENT EP1 190 815 COMPENSATING CHUCKS OVEKA & KA COMPENSATING CHUCKS For centric cylindrical, orbital pin or form grinding of complex shaft-type components, the workpiece is generally ground between centers.
More informationEG - Engineering Graphics
Coordinating unit: 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering Teaching unit: 717 - EGE - Department of Engineering Presentation Academic year: Degree: 2018 BACHELOR'S
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationInstallation and Operating Instructions for Shrink Discs RLK 608 and RLK 608 E E e
for Shrink Discs RLK 608 and RLK 608 E E 03.621e Schaberweg 30-34 Telephone +49 6172 275-0 61348 Bad Homburg Telefax +49 6172 275-275 Germany www.ringspann.com info@ringspann.com issue: 26.10.2018 version
More informationPRODUCTS & SERVICES GUIDE
PRODUCTS & SERVICES GUIDE IT S YOUR MOVE. 2 ROCKFORD BALL SCREW ABOUT US Ian McBain founded Rockford Ball Screw (RBS) in 1973 utilizing his years of experience in the industry with the goals of providing
More informationWORKHOLDING TECHNOLOGIES
ITC WORKHOLDING TECHNOLOGIES Expanding Mandrels and Collet Chucks INDUSTRIAL TOOLS CORPORATION n 54/14, D-II, M.I.D.C., Chinchwad, Pune - 411 019. Tel.: 020-7474394, 7470844 n 302, Vicky Apartment, P.
More informationMFG 316 Chapter 4 //Workholding Principles
Workholding Principles All devices that grip, hold, chuck, or retain a workpiece in order to perform a manufacturing operation. Force=hydraulic, pneumatic, electrical, mechanical Force multiplication by
More informationExample workpieces: - Gearbox casing. Example format: - Diameter 800 mm
RADIAL CHUCKS SAV 260.99-RSF 3 + 3 JAW CHUCKS - 3 + 3 jaw chuck with two independently actuated clamping circles - Easily adaptable from centred to balanced operation - Jaw stroke 15 mm (Stroke per jaw)
More informationExcellent Clamping. Mechanical Clamping Devices
Excellent Clamping Mechanical Clamping Devices Precise Mechanical Clamping Devices for All Requirements Experience in clamping technology For decades, König-mtm has been one of the leading manufacturers
More informationLathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More information[ means: Precision and reliability - In series. EMCO MAXXTURN 95. Universal CNC turning center for machining shafts and chuck parts
[ E[M]CONOMY] means: Precision and reliability - In series. EMCO MAXXTURN 95 Universal CNC turning center for machining shafts and chuck parts EMCO MAXXTURN 95 [Control unit] - Ergonomic, swivel-type control
More informationInstallation and operating instructions for Brake disc with clamping element RLK 608 E Schaberweg Telefon
Brake disc with clamping element RLK 608 E 09.683 Schaberweg 30-38 Telefon +49 6172 275 0 61348 Bad Homburg Telefax +49 6172 275 275 Deutschland www.ringspann.com info@ringspann.com Issue: 07.06.2017 Version:
More informationScrews. Introduction. 1. Nuts, bolts and screws used to clamp things together. Screws are used for two purposes:
Screws Introduction Screws are used for two purposes: 1. To clamp things together. 2. To control motion. 1. Nuts, bolts and screws used to clamp things together. Nuts, bolts and screws that are used for
More informationExcellent Clamping. Mechanical Clamping Devices
Excellent Clamping Mechanical Clamping Devices Precise Mechanical Clamping Devices for All Requirements Experience in clamping technology For decades, König-mtm has been a leading manufacturer of state-of-the
More informationHARDINGE Installation booklet For: Dead-Length Collet Adaptation Chucks Stationary Collet
HARDINGE Installation booklet For: Dead-Length Collet Adaptation Chucks Stationary Collet Read the enclosed instructions and recommendations before any installations CONTENTS Dead-Length Collet Adaptation
More informationHMZ Locknuts simple and reliable locking devices
simple and reliable locking devices Technical Product Information A Member of the Schaeffler Group Application Characteristics Application The new HMZ locknuts are easy to handle, permitting accurate and
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More information5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC B COOPERATIVE PATENT CLASSIFICATION PERFORMING OPERATIONS; TRANSPORTING (NOTES omitted) SHAPING B25 HAND TOOLS; PORTABLE POWER-DRIVEN TOOLS; MANIPULATORS (NOTE omitted) B25B TOOLS OR BENCH DEVICES
More informationHYDRAULIC ZERO-REACH ARBORS. Zero-reach arbors with hydraulic chuck and matching POKOLM accessories
HYDRAULIC ZERO-REACH ARBORS Zero-reach arbors with hydraulic chuck and matching POKOLM accessories HYDRAULIC ZERO-REACH ARBORS ARBOR AND ADAPTER SYSTEMS HYDRAULIC ARBORS AND ADAPTERS: OUTSTANDING TOOL
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationType XTSR71 Sizes
(Page 1 of 13) s 494-5258 Type XTSR71 s 494-5258 Figure 1 Thomas XTSR71 Coupling 1. General Information 1.1 Thomas Couplings are designed to provide a mechanical connection between the rotating shafts
More informationTurning and Related Operations
Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.
More informationMacroJunior & MacroCombi
MacroJunior & MacroCombi gives extreme flexibility one chuck, two systems reduces setting-up times. ensures precision and quality is suitable for automatic changing with System 3R s automation program.
More informationTools for the Mechanical Mounting and Dismounting of Rolling Bearings
Tools for the Mechanical Mounting and Dismounting of Rolling Bearings Contents Page Mechanical mounting and dismounting of rolling bearings... 2 Cylindrical bearing seats... 2 Tapered bearing seats...
More informationNEW DUPLEX CLAMPING SYSTEM. Combined internal and external clamping in one clamping tool
NEW DUPLEX CLAMPING SYSTEM Combined internal and external clamping in one clamping tool DUPLEX CLAMPING SYSTEM The new DUPLEX clamping system combines mandrel and collet chuck in a single clamping tool,
More informationVertical and horizontal Turning/Grinding Centers
Vertical and horizontal Turning/Grinding Centers INDEX Turning/Grinding Centers Turning and grinding of course with INDEX The INDEX Turning/Grinding Centers combine the advantages of turning and grinding
More informationTURNING BORING TURNING:
TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single
More informationWM en. Zero point clamping system system 3000
Zero point clamping system system 3000 unique push-on very strong automatic monitoring flush mounted SPEEDY and spigot handling without interfering contour 50kN retention force suitable for automation
More informationCAM SYSTEM. Eccentric self-locking clamping devices. Set. CAM SYSTEM t. CAM SYSTEM t. Set. CAM SYSTEM s pag CAM SYSTEM s pag.
Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123 CAM-SYSEM eccentric self-locking he CAM SYSEM has been
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationMINIATURE METAL BELLOWS COUPLINGS
VERSATILE AND PRECISE. MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE ULTIMATE COUPLIN FROM 0.05 10 Nm BACKLASH FREE MINIATURE BELLOWS COUPLINS Areas of application: Ideal for precise transmission
More informationThis manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified.
This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified. Step #1 Lay all parts out to verify quantities. (2) 2 x 25-1/4
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More information4) Drive Mechanisms. Techno_Isel H830 Catalog
4) Drive Mechanisms This section will introduce most of the more common types of drive mechanisms found in linear motion machinery. Ideally, a drive system should not support any loads, with all the loads
More informationTHE GATE COACHAll Rights Reserved 28, Jia Sarai N.Delhi ,-9998
1 P a g e 1 DESIGN AGAINST STATIC AND FLUCTUATING LOADS 2 SHAFT, KEYS AND COUPLINGS CONTENTS Introduction 6 Factor of safety 6 Stress concentration 7 Stress concentration factors 8 Reduction of stress
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION Bed type milling machine FS(Q) 100/125 INTELLECTUAL PROPERRY OF TOS KUŘIM - OS, a.s. page: 1 from 14 Article 1. GENERAL CHARACTERISTICS OF THE MILLING MACHINE 3 2. MACHINE DESCRIPTION
More informationTCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
More informationBall screw spindles are roll manufactured using modern machines prior to hardening and polishing.
Functional overview Ball screw spindle Ø 16 Ball screw spindle Ø 25 Overview 2-45 2-46 2-46 Ball screw nut 2 2-47 Ball screw nut 3 2-47 Clamping blocks for nut version 3 2-48 for spindle Ø 16 2-49 for
More informationCORDIPAR. Universal Length Measuring Instruments. From our range. KORDT GmbH & Co. KG Preyerstraße D Eschweiler / GERMANY
From our range External Thread Measuring Gauges from 2-996 nominal diameter Internal Thread Measuring Gauges from - 1026 nominal diameter Thread Depth Gauges to check thread depth of bores Thread Setting
More informationStudent, Department of Mechanical Engineering, Knowledge Institute of Technology, Salem, Tamilnadu (1,3)
International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016 11 Combined Drilling and Tapping Machine by using Cone Mechanism N.VENKATESH 1, G.THULASIMANI 2, S.NAVEENKUMAR 3,
More informationService Parts List AA4V90
Service Parts List AA4V90 Series 1 06.96 Ordering of AA4V Parts For Rexroth to supply the correct parts for your unit, please include all of the following information with your parts order. TYPE CODE TYPE
More informationSHARP STA, STB, STC, STF SERIES CNC big bore flat bed lathe
SHARP STA, STB, STC, STF SERIES PRECISION MACHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, CA 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com Parts: parts@sharp-industries.com
More informationJaw chuck B-Top3 STANDARD CHUCKS. 215 Variant. Jaw chuck B-Top3. Technical data. Size. B-Top3
STANDARD CHUCKS. Technical data A AJ DH AI AT AW T BQ AS Size 215 ariant B-Top3 Concentricity [mm] Max. clamping force [kn] Max. axial drawtube force [kn] RPM n max. [1/min.] Stroke per jaw [mm] Ø Capacity
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationOverview Grinding Applications
GRINDING 14E Overview Grinding Applications SRG Workpieces High precision grinding Steady Rests Grinding diameter Ø 20-85 mm Camshafts Crankshafts Shafts Chapter 1 Fine adjustment of the grinding center
More informationTurning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
More informationHARDINGE Installation booklet For:
HARDINGE Installation booklet For: L Flange Nose Dead-Length Collet Adaptation Chucks Draw Collet Read the enclosed instructions and recommendations before any installations WARRANTY & RETURN PROCEDURES
More information25000 Series Lo-T TM Butterfly Control Valve Instructions
November 2001 25000 Series Lo-T TM Butterfly Control Valve Instructions Instruction No. 25.1:IM PRELIMINARY STEPS Before installation, note the flow direction arrow on the valve body. The flow should enter
More informationInternational Journal of Advanced Engineering Research and Studies
Research Paper DESIGN AND DEVELOPMENT OF SPM-A CASE STUDY IN GANG MILLING MACHINE FOR MANUFACTURING OF CONVEYOR CHAIN BUSHES Mr. S. V. Shekhar 1, Prof. H. G. Patil 2 Address for Correspondence 1 Post Graduate
More informationVarious other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
More informationDimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding
Info Dimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding DIN 55026 from taper size 4 with driver. Spindle head Size C1 C2 D hole count outer olt
More informationFNL-220Y / 220SY / 200LS Series CNC Turning-Milling Machines Linear Way
RICH WELL 206.0 Dimensions R450 E FNL-220Y / 220SY / 200LS Series CNC Turning-Milling Machines Linear Way 20 C D Chip conveyor 092 H G B 46 575 A F Unit:mm A B C D E F G H FNL220LSY/FNL220LY 952 2946 2700
More information[ means: One-stop shop. EMCOMAT FB-450 L / FB-600 L. Universal milling machines with Heidenhain TNC 320 or EMCO Easy Cycle
[ E[M]CONOMY] means: One-stop shop. EMCOMAT FB-450 L / FB-600 L Universal milling machines with Heidenhain TNC 320 or EMCO Easy Cycle EMCOMAT FB-450 L / FB-600 L Whether single or small series production,
More informationThat s E[M]CONOMY: Big Performance for small Parts. EMCO MAXXTURN 25. Universal turning center for the complete machining of small, precision parts
[ That s ] E[M]CONOMY: Big Performance for small Parts. EMCO MAXXTURN 25 Universal turning center for the complete machining of small, precision parts EMCO MAXXTURN 25 [Work area] - Spacious - Free chip
More informationSECTION 9: PARTS Main Breakdown
SECTION 9: PARTS Main Breakdown 2 115 75 113 112 8 9 7 8 11 4 5 3 3 85 81 79 78 90 84 68 69 69 68 87 86 86 91 95 98-2 98-1 98-3 98-4 98 98-8 98-9 98-5 98-6 99 97 98-7 100 92 114 108 107 110 109 111 104
More informationBNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA
BNA-42MSY2 Fixed Headstock Type Automatic CNC Lathe BNA BNA- 42MSY2 Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA-42MSY2 is able to handle complex machining,
More informationbcprecision Devices, Inc. HYDRAULIC ARBORS AND CHUCKS
UNEQUALED WORK HOLDING ACCURACY for: grinding; balancing; inspection; boring; facing; reaming; drilling; turning; shaving; hobbing and honing b SQUARENESS r CONCENTRICITY f PARALLELISM e ROUNDNESS v ALIGNMENT
More informationInspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent.
6010-34 Inspection 3. Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 3. If spring test equipment is available, check the tension of each spring according to the specifications
More informationDUGARD. DUGARD Machine. DUGARD CNC Lathes. Dugard 220LY / 220LSY CNC Turning and Milling Centres. Expertise with Imagination.
DUGARD Expertise with Imagination DUGARD CNC Lathes Dugard 220LY / 220LSY CNC Turning and Milling Centres Multi-axis lathes with linear ways and sub-spindle option DUGARD Machine Tools www.dugard.com sales@dugard.com
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationHardinge FlexC Collet System Style D 65mm
Hardinge FlexC Collet System Style D 65mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly read
More informationTroubleshooting for Milling Chuck. Details of the trouble Cause Solution / Countermeasures
TROUBLESHOOTING 571 Troubleshooting Troubleshooting for Milling Chuck Details of the trouble Cause Solution / Countermeasures Tool cannot be held Tool shank diameter should be within h7 tolerance. Tool
More informationRotary Position Technology Incremental Encoders
-40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationGeneral Four-Way Operation, Maintenance & Service Manual
General Four-Way Operation, Maintenance & Service Manual SCOPE Included in the following pages you will find assembly drawings, exploded views, parts lists, assembly tips, operational descriptions and
More informationWSG 8-115; 8-125; P; WSG ; WSG P; WSG PS; WSG P; WSG 15-70Inox
Repair instructions Page of 47 Contents. Models described 2. Technical data 3. Notes and requirements 4. Tools required 5. Lubricants and auxiliary substances required 6. Disassembly 7. Assembly 8. Connection
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More informationClamping devices - mechanical
Zero point reference also on down draw clamps A fixed zero point reference on down draw clamps is self-evident in the STARK zero point mounting system. This zero point reference on down draw clamps is
More informationPRODUCTS, PROCESSING AND PRODUCTION. ROLLING BEARINGS LINEAR TECHNOLOGY
LINEAR TECHNOLOGY PRODUCTS, PROCESSING AND PRODUCTION. ROLLING BEARINGS LINEAR TECHNOLOGY USE OUR STRENGHTS FOR YOUR SUCCSESS! PRODUCT GROUPS 8-11 LINEAR TECHNOLOGY 6/7 CONTENTS. 12/13 PRODUCTION & PRECISION
More informationSE 320 SE 520. CNC center lathes
CNC center lathes These machines combine advantages of universal lathes and CNC lathes. The machine works as an universal lathe, in manual mode, being controlled by the hand wheels. If required, the operation
More informationFBL-250Y/320Y/SY Series. CNC Turning-Milling Machines Linear/Box Way
FNLY/2Y/SY Series FBLY/2Y/SY Series CNC TurningMilling Machines Linear/Box Way Multifunctional Turning and Milling Excellence FNLY/2Y/SY Linear Way Series FBLY/2Y/SY Box Way Series CNC TurningMilling Machines
More informationAssembly and Adjusting Instructions for Modules 6x6 and 4x4 Alignment Adapter
Translated version of the instructions Version: 11/2017 SAP no.: 400151427 Assembly and Adjusting Instructions for Modules 6x6 and 4x4 Alignment Adapter The document was prepared by Gühring KG. All rights
More informationSERIES I MILLING MACHINES
INSTALLATION, OPERATION, MAINTENANCE, AND PARTS LIST SERIES I MILLING MACHINES TP5260 Revised: August 29, 2005 Manual No. M-450 Litho in U.S.A. Part No. M -0009500-0450 June, 2003 MAINTENANCE PROCEDURES
More information1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe
1. The Lathe 1.1 Introduction Lathe is considered as one of the oldest machine tools and is widely used in industries. It is called as mother of machine tools. It is said that the first screw cutting lathe
More informationROOP LAL Unit-6 Lathe (Turning) Mechanical Engineering Department
Notes: Lathe (Turning) Basic Mechanical Engineering (Part B) 1 Introduction: In previous Lecture 2, we have seen that with the help of forging and casting processes, we can manufacture machine parts of
More informationKTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
More informationHardinge FlexC Dead-Length Collet System Style DL 42mm. Installation Instructions and Parts Lists
Hardinge FlexC Dead-Length Collet System Style DL 42mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
More informationPARTS. W1669 & W1670 Parts PARTS. Model W1669/W1670 (For Machines Mfd. Since 04/18) 66V A A A 28A
W1669 & W1670 Parts 23 66V2 22 21 25 26 53A 62 63 89 64 9 65 24 20 15 16A 54 93 10 16A-1 81 77 94 53 79 102 103 28 36 8 30 19 31 32 32-1 109 28A 28 27 34 33 56 49 76 76 19-3 19-1 19-2 38-1 89 35 60 59
More informationOperating instruction for the quick-change tap holders type:
type: KSN 0 KSN 1 KSN 3 KSN 4 KSN 5 Date of edition: 01.02.2008 Stage of alteration: 1 Please keep this for future use! Contents: 1 Application range, safety instructions and technical data... 3 1.1 Application
More informationTools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File. 2. Cut the stock Place stock in vise and cut with hack saw
Purpose: MAKE CATAPULT ARM Step 1 Tools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File Materials: Flat aluminum ½ inch stock (see picture below) Gloves required 1. Pick up the aluminum ½
More informationThe Engineer s Guide: Lead Screws vs. Ball Screws
The Engineer s Guide: Lead Screws vs. Ball Screws It s All About the Application Each type of actuator has its advantages and disadvantages. Before you can decide on whether to use a ball screw or a precision
More informationQUICK, FLEXIBLE AND COPLANAR
EASY-CLAMPING BASE BENEFITS» quick adaption» modular clamping system for various combinations» use with standard clamping systems Easy-clamping base M Easy-clamping base L Easy-clamping base XL QUICK,
More information488 PARTS LIST 1 3 SCREWS FOR NO. 2 2 FLYWHEEL CAP 3 FLYWHEEL 4 END NUT FOR NO. 10 5 BALL BEARING FOR NO. 3 (1 st ) 6 BALLBEARING FOR NO. 3 (2nd) 7A CLUTCH RACE KEY 7B CLUTCH RACE 7C CLUTCH SPRING 7D 7
More informationBETEX MECHANICAL PULLERS. BETEX MSP 2/3-arm pullers, self-centering. Safe and easy dismounting of bearings, couplings, rings etc.
BETEX MSP 2/3-arm pullers, self-centering Safe and easy dismounting of bearings, couplings, rings etc. Ergonomic design, easily operated by one person! Practical! Self centering 2 or 3-arm puller with
More informationRotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationc. Pins, bolts, and retaining rings b. Washers, locking nuts, and rivets
62 20 HW 8: Fasteners / Force, Pressure, Density Mechanical Systems DUE Mon, 11/21/16 Start of class Check link on website for helpful fastener information Please use a scantron. Material is based primarily
More informationEnsat driving tools...
nsat driving tools... On this page, you can configure the optimum tool for your application. A configuration is provided in the following as an illustrative example. The article number is composed of two
More informationPREVIEW COPY. Table of Contents. Lathes and Attachments...3. Basic Lathe Operations Lesson Five Threads and Threading...73
Table of Contents Lesson One Lesson Two Lesson Three Lesson Four Lathes and Attachments...3 Basic Lathe Operations...21 Drilling and Boring...39 Reaming...57 Lesson Five Threads and Threading...73 Copyright
More informationCNC slant bed lathe OPUS
CNC slant bed lathe OPUS 41 5 T e c h n i c a l D a t a s h e e t Solid, polished, and hardened flat guides in combination with a powerful drive system of the main spindle and on the feed axes provide
More informationCaliper Brake WINDCAL 90
Caliper Brake WINDCAL 90 (i) FORM NO. L-20233-A-0601 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without
More informationInstallation and Operational Instructions for ROBA -DS couplings Type 95. _ (disk pack HF) Sizes
95. _ (disk pack HF) Sizes 6 22 Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to coupling failure, resulting
More informationINSTRUCTION MANUAL Q-HYDRAULIC
Dat: 15.04.02 No: 94-BA 5039E/1b TABLE OF CONTENTS Part III 3.0 Type code explanation 3.1 Service connections 3.2 Impeller clearance adjustment 3.2.1 Wear of wearing parts 3.2.2 General notes to adjustment
More information