Non-contact conveyance is possible.
|
|
- Abraham Greer
- 5 years ago
- Views:
Transcription
1 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) Cyclone Pad Non-contact conveyance is possible. Workpiece with uneven and/or viscous surface Solar battery cell Electrode line Substrate Workpiece sensitive to scars or suction traces Liquid crystal glass Film, Copper film, etc. Prevents deflection Thin workpiece Series XT661 Substrate Air layer Reflection prevention (viscous) film Workpiece with holes Note) Open hole ratio within 1% Porous workpiece Paper, Cardboard box, Lumber, etc. Supply port Working Principle Nozzle Negative pressure (vacuum part) Whirlwind flow Workpiece Air from the supply port is ejected from a nozzle on the cylindrical side to generate a whirlwind flow inside the cylinder and leading to the vacuum. (Cyclone effect.) Supply air is discharged to the atmosphere from between the suction surface and the workpiece. As a result, an air layer is generated between the cyclone pad and the workpiece, resulting in the workpiece being lifted without contact. Be sure to prepare a guide prior to use. For holding and positioning a workpiece, and for preventing collision between the workpiece and pad during lifting, provide a guide. See page for details. P-E7-8A
2 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) Original groove-channel design (PAT.PEND) provides cyclone effect with larger suction area and more even pressure dispersion! 1 Pressure dispersion in height direction Lifting force % improved, Air consumption % reduced ( comparison with conventional SMC cyclone method with an outer size of 6 mm) Outer body diameter (mm) Lifting force N Air consumption l/min (ANR) Grease-free Pressure dispersion in diameter direction (Supply pressure. MPa) Cyclone Pad Large vacuum area, even pressure dispersion Conventional SMC cyclone method Small vacuum area, highervacuum in the central part
3 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) XT661-2A XT661-6A XT661-1A Lifting Force XT661-A XT661-8A
4 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) P Depth PL Air supply port 11.6 ød XT661 Model XT661-2-R (L) XT661--R (L) XT661-6-R (L) XT661-8-R (L) XT661-1-R (L) 2 x M Depth ML P M x.8 M x.8 M x.8 Rc1/8 Rc1/8 A Outer body diameter 2A 2 mm A mm 6A 6 mm 8A 8 mm 1A 1 mm PL R Direction of whirling air R Clockwise L Counterclockwise Outer body diameter (mm) Piping port size M x.8 Rc1/8 Fluid Air Operating pressure Proof pressure Ambient and operating temperature Grease.1 to. MPa.7 MPa to 6 C (with no condensation) Grease-free Air purification rating: JIS B (ISO873-1) Quality Degree,, 2 XT661-2-R (L) How to Order Specifications Dimensions M M2 x. M x.7 M x.7 M x.7 M x ML 3.2 P Depth PL Air supply port C ød (mm) D Cyclone Pad Series XT661 ø2, ø, ø6, ø8, ø1 XT661- -R (L) p.c.d. C x M Depth ML 3
5 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) Guide Provide a guide in accordance with the application and/or configuration of a workpiece. q Holding/Positioning a Workpiece Due to non-contact, a workpiece may slide during conveyance. To hold the workpiece, provide a guide, etc. for the side of the workpiece. w Preventing Contact Depending on the operating conditions, the workpiece surface may contact the pad when lifted. To prevent contact, provide a guide to distance the workpiece. e Preventing Rotation 1) When using a single pad, the workpiece tends to rotate due to the cyclone effect. Provide a guide to prevent the workpiece from rotating. 2) When using more than one pad, use even numbered, clockwise or counterclockwise whirling pads. This can prevent the workpiece from rotating. Example of Guide Installation Workpiece Vacuum pad (Workpiece positioning) Guide Example of Vacuum Pad Application The cyclone pad can reduce the amount of surface contact while fixing the workpiece.
6 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) Air Dryer / Series IDF Decreases the dew point of compressed air. Limits moisture generation which can lead to damage. Digital Flow Switch / Series PF2A Decreases the air consumption by flow control. Related Products SMC can provide all pneumatic equipment required for supplying air to the cyclone pad. Recommended pneumatic circuit Air Filter / Series AF 3 Eliminates solid foreign matters such as powder particles in the compressed air. Mist Separator / Series AFM Eliminates oil mist which is difficult to eliminate with an air filter. 2-Color Display Digital Flow Switch / Series PFM Regulator / Series AR/SRH Decreases the air consumption by setting to an appropriate pressure. 6 Digital Pressure Switch / Series ISE3 Remote Type Digital Pressure Switch / Series PSE 7 2 Port Valve / Series VCA-X1/LVA 8 Restrictor / Series AS-X21 Regulates to the appropriate air volume depending upon the installation condition. Decreases the air consumption. Oil-free (Seal material: PTFE coat treated) Akihabara UDX 1F, -1-1, Sotokanda, Chiyoda-ku, Tokyo 11-21, JAPAN Phone: Fax: URL 27 SMC Corporation All Rights Reserved PSE3 PSE AR 9 Clean Air Filter / Series SFD Built-in capillary element Nominal filtration rating:.1 µm Adopted hollow fiber elements with over 99.99% filtering efficiency don't contaminate workpieces. 1 VCA-X1 (Oil-free) SRH LVA Clean Air Module / Series LLB Modularizes clean equipment. Nominal filtration rating:.1 µm Wetted parts: Grease-free, Silicon-free Specifications are subject to change without prior notice and any obligation on the part of the manufacturer. D-KS 1st printing LY printing LY 13KS Printed in Japan. This catalog is printed on recycled paper with concern for the global environment.
Non-contact conveyance is possible.
Cyclone Pad Non-contact conveyance is possible. Supply port Nozzle Workpiece with uneven and/or viscous surface Solar battery cell Whirlwind flow Air layer Electrode line Reflection prevention (viscous)
More informationNon-contact Gripper. Series XT EU605-UK INFORMATION. Assist in non-contact workpiece transfer. Max workpiece suction distance:10 mm
Non-contact Gripper INFORMTION ssist in non-contact workpiece transfer. Max workpiece suction distance: mm Refer to Lifting Force Distance from the Workpiece on pages to 3. Layer of air Workpiece mm Since
More informationElectric Actuator/ High Rigidity Slider Type
INFORMATION Electric Actuator/ High Rigidity Slider Type RoHS Clean Room Specification ISO Class 4 * (Class ) *2, *3! Built-in vacuum piping Possible to mount the main body without removing the external
More informationIntroduction to Filters. Master Pneumatic General Purpose Filters Coalescing Filters
Introduction to Filters Master Pneumatic General Purpose Filters Coalescing Filters Several Types of Filters Remove Contaminants from Compressed Air General Purpose --- Remove water and particulate matter
More informationIonizer. IZS40/41/42 Series. Potential amplitude: 25 V or less Rapid neutralization of static electricity: Fastest time: 0.
Ionizer // Series Note ) Potential amplitude: V or less Rapid neutralization of static electricity: Fastest time:. seconds Note ) RoHS Dual AC type Series Potential amplitude of the workpiece is reduced
More informationElectronic Vacuum Regulator. Standard Specifications. Model Voltage
Electronic Vacuum Regulator Series ITV9/9 Stepless control of vacuum in proportion to an electric signal Straight type Piping/Wiring Diagram (VDC, madc) Vacuum pump, Ejector ITV9 Right angle type Tank
More informationInformation. A hard stop is not required for the clamping. Mounting conditions are reproducible when the cylinder is replaced.
Information SMC Corporation Akihabara UDX 15F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 11-21, JAPAN http://www.smcworld.com 213 SMC Corporation All Rights Reserved Slim-line Power Clamp Cylinder (Clamp arm
More informationBernoulli grippers OGGB
Key features General Purpose Benefits Applications The Bernoulli gripper OGGB is ideally suited to transporting thin, extremely delicate and brittle workpieces. Minimised workpiece contact, gentle workpiece
More informationAdsorption Plate. SP Series. Specialized for adsorption and fixing in place of thin sheets, glass substrates, and soft workpieces.
dsorption Plate Series Specialized for adsorption and fixing in place of thin sheets, glass substrates, and soft workpieces. ZUK MJ J MV 749 Ideal for adsorption and fixing in place of thin sheets, glass
More informationCompact Hydraulic System for Energy Savings and High Precision. POWER Meister
Compact Hydraulic System for Energy Savings and High Precision POWER Meister POWER Meister Compact Hydraulic System Superior Energy Savings High Precision AC servo motor controls rotational speed and direction
More information37 mm x Width 30 mm. Rapid neutralization of static electricity: Fastest time 0.1 S. Dual AC Type IZT42 Series
Separate Controller Bar Type Ionizer Space saving Height Potential amplitude: 25 V or less *1 37 mm x Width 3 mm Rapid neutralization of static electricity: Fastest time.1 S *2 37 mm 3 mm High-voltage
More informationAdsorption Plate. Specialized for adsorption and fixing in place of thin sheets, glass substrates, and soft workpieces. Series SP
dsorption Plate Series Specialized for adsorption and fixing in place of thin sheets, glass substrates, and soft workpieces. Z Z K MJ MV P HP quipment 1239 Ideal for adsorption and fixing in place of thin
More informationSintec Optronics Technology Pte Ltd 10 Bukit Batok Crescent #07-02 The Spire Singapore Tel: Fax:
Sintec Optronics Technology Pte Ltd 10 Bukit Batok Crescent #07-02 The Spire Singapore 658079 Tel: +65 63167112 Fax: +65 63167113 High-power Nd:YAG Self-floating Laser Cutting Head We supply the laser
More informationAdsorption Plate. Specialized for adsorption and fixing in place of thin sheets, glass substrates, and soft workpieces. Series SP
dsorption Plate Series Specialized for adsorption and fixing in place of thin sheets, glass substrates, and soft workpieces. Z Z K MJ MV P HP Related quipment ourtesy of Steven ngineering, Inc.-230 Ryan
More informationEngineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input
More informationPlunger type Metering Pump
type Metering Pump High-precision, High-pressure Injection Now Possible Improved Seal Service Life Makes This Pump Ideal for Metering Injection of hemicals Features Stable discharge precision. High durability
More informationLPK1550 Hydraulic Crimping Tool 15-ton
SERVICE MANUAL LPK1550 Hydraulic Crimping Tool 15-ton Serial Code FYF Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationTPV 1200 BTB. Variable Displacement Closed Loop System Axial Piston Compact Tandem Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 160 / 0516 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationElectronic Vacuum Regulator. How to Order ITV S 5. Monitor output
Electronic Vacuum Regulator Series ITV29/29 How to Order [Option] RoHS ITV 29 2 S 5 Pressure range 9.3 to 8 kpa Power supply voltage 24 VDC to 5 VDC Note) Communication models are available only for 24
More informationSyncore Analyst Technical data sheet
STOP PROGRAMM SET DOWN UP DOWN UP Syncore Analyst Technical data sheet With the Syncore Analyst, BUCHI is offering a solution for a fast, gentle and environmentfriendly multiple sample concentration to
More informationPrinting Processes and their Potential for RFID Printing
Printing Processes and their Potential for RFID Printing Anne Blayo and Bernard Pineaux, EFPG 1 - Printing processes - A.Blayo and B. Pineaux - soc -EUSAI - 12th October 2005, Grenoble Outline General
More informationInstallation and Connection Manual
Installation and Connection Manual (E Controller) Kawasaki Heavy Industries, Ltd. 90202-1003DEA PREFACE This manual explains the installation and connection procedures for Kawasaki Painting Robot. Read
More informationImproved Cooling unit with Automatic Temperature Controller for Enhancing the Life of Ice Bonded Abrasive Polishing Tool
Improved Cooling unit with Automatic Temperature Controller for Enhancing the Life of Ice Bonded Abrasive Polishing Tool S.Rambabu 1 and N. Ramesh Babu 2 * 1 Department of Mechanical Engineering, Indian
More informationWDM-135A (2-wire type) WDM-136A (4-wire type) CONDUCTIVITY TRANSMITTER. Functions Features. Structure diagram. 10/ cm (note 3) 2-wire system
CONDUCTIVITY TRANSMITTR WDM-A (-wire type) WDM-6A (-wire type) It is a type of small firm aluminum -electrode site-installation CONDUCTIVITY TRANSMITTR (signal transmitter) and easy operate. The device
More informationOEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)
Electronic pressure measurement OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 Applications Hydraulics and pneumatics Pumps and compressors
More informationSeries 10-ZSE80/10-ISE80
Series 0-ZSE80/0-ISE80 RoHS -Color Display Digital Pressure Switch For General Fluids Directional Control Valves For positive 0 80 For vacuum/ compound 80 80F N P B R T S V Rated range Symbol -X50 Clean
More informationTrunnion bearing housings for grinding mills FSDR.. K series
Trunnion bearing housings for grinding mills FSDR.. K series Bearing types Spherical roller bearings Bearing dimension series 39, 48 and 49 Shaft diameter range 825 to 1 460 mm Typical bearing-shaft combinations
More informationDirectional valves Electrically operated Series 563, 565, 567. Brochure
Directional valves Electrically operated Brochure 2 Directional valves Electrically operated 3/2-directional valve, Series 563 Qn = 1350 l/min plate connection Electr. connection: Plug, Form B, industry
More informationSAFETY PRECAUTIONS GENERAL INFORMATION
Form No. 102831 SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.hytec.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800)
More informationMODEL T /2-TON ARBOR PRESS INSTRUCTIONS
MODEL T27033 1/2-TON ARBOR PRESS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction This arbor press is designed to perform
More informationMANUAL VERSION INDUSTRIAL RIVET & FASTENER CO. RIVETING TOOL MANUAL MODEL # RK-9000-LS
MANUAL VERSION B INDUSTRIAL RIVET & FASTENER CO. RIVETING TOOL MANUAL MODEL # RK-9000-LS N 8340000001133 (version 2016) TABLE OF CONTENTS : 1. GENERAL SAFETY INSTRUCTIONS AND PRINCIPLES... 2 2. DESCRIPTION
More informationEccentric vibrating mill
Eccentric vibrating mill Mechanical-chemical activation and finest reduction of all brittle materials Application Vibrating mills are suitable for the reduction of all brittle material. Depending on the
More informationDevelopment of Remote Hanford Connector Gasket Replacement Tooling for the Savannah River Site s Defense Waste Processing Facility
Development of Remote Hanford Connector Gasket Replacement Tooling for the Savannah River Site s Defense Waste Processing Facility - 9457 B. Metzger, J. Gee Defense Waste Processing Facility Savannah River
More informationThe transducer component converts the measured signal and displays the actual value.
Digital inductive conductivity transmitter System Integration Provides low Total Cost of Ownership PEEK/PPA version for CIP applications TEACH IN and SIMULATION Function Approval PVDF Version PEEK Version
More informationSeries 80 In-Line Mounted Centrifugal Pumps
Bulletin B-G Bell & Gossett Series In-Line Mounted Centrifugal Pumps Applications Hydronic Heating & Cooling Systems Industrial Process General Service Pressure Boosting Advantages Close Coupled Space
More informationFully understand the features above and select the equipment that suits your operating conditions.
1 Features and Precautions for Vacuum Adsorption Vacuum adsorption system as a method to hold a workpiece has the following features. Easy construction Compatible with any place where adsorption is possible.
More informationDrill for Wheel Hubs. Solid Carbide Drill MHE
. Update B3G Expanded New Grade Solid Carbide Drill Uniue design provides superior hole accuracy for shallow hole drilling. Effective drilling of hub bolt holes can be achieved. Additional new grade DP30
More informationSpeed Controller with One-touch Fittings In-line Type
Speed Controller with One-touch Fittings In-line Type New RoHS types of mounting variations Direct mounting DIN rail mounting mounting Holder mounting DIN rail mounting bracket Holder for speed controller
More informationDC88X DOUBLE CYLINDER E1330X - E1430X - E1530X
DC88X DOUBLE CYLINDER E1330X - E1430X - E1530X DOUBLE CYLINDER E1330X - E1430X - E1530X PNEUMATIC TAKEDOWN SIMPLIFIED SHELL SINGLE-MAGNET SELECTION All images in this brochure are indicative and not binding.
More informationModel Number Designation F- PV2R1-6 -L -R A A -42 -* Shaft Rotation. A: Upwards (Normal)
VNE PUMPS "PVR" Series Single Vane Pumps These pumps are of high pressure and high performance, which have been developed especially for low noise operation. To comply with a variety of applications including
More informationIonizer. Potential amplitude: 25 V or less Rapid neutralization of static electricity: Fastest time: 0.1 seconds. Series IZS40/41/42.
Ionizer Note ) Potential amplitude: V or less Rapid neutralization of static electricity: Fastest time:. seconds Note ) RoHS Dual C type Series IZS Potential amplitude of the workpiece is reduced with
More informationTOOLS NEWS B218G. Hydro-Clamp Type Valve Finisher HVF. New Product. Series. Drastically shortened time and reduced costs!
TOOLS NEWS Hydro-Clamp Type Valve Finisher HVF Series B218G New Product Drastically shortened time and reduced costs! Cooperated with Hydro-Clamp Type Valve Finisher HVF Series Greatly Reduced Costs The
More informationLiquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design SIHI extruvac LEME 13, LEME 155 Pressure range: Suction volume flow: 1 to 113 mbar 3 to 17 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement
More informationTOOLS NEWS B216B. High Feed Finish Milling Cutter FMAX. Feed Maximum (FMAX) Milling cutter for ultra efficient and accurate finishing.
TOOLS NEWS B216B Feed Maximum () Milling cutter for ultra efficient and accurate finishing. By CG image Ultra high efficiency machining The ultra fi ne pitch design is ideal for high effi ciency machining
More informationOperating Manual. for CUTTING, PERFORATING, BENDING SLB120
Operating Manual for CUTTING, PERFORATING, BENDING SLB120 31040\B06eng 0896 0 Contents 1. Scope of delivery... 1 2. Technical specifications... 1 3. Applications... 1 4. Commissioning... 2 5. Cutting...
More informationRepair System for Sixth and Seventh Generation LCD Color Filters
NTN TECHNICAL REVIEW No.722004 New Product Repair System for Sixth and Seventh Generation LCD Color Filters Akihiro YAMANAKA Akira MATSUSHIMA NTN's color filter repair system fixes defects in color filters,
More informationEffect of Corona Treatment on Spreading Behavior of UV Ink over Inkjet Printed Silver Nano-Particle Layer
Effect of Corona Treatment on Spreading Behavior of UV Ink over Inkjet Printed Silver Nano-Particle Layer Khushbeen Department of Printing Technology GJUS&T, Hisar, Haryana, India Email- khushveen12@gmail.com
More informationPressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
More informationMetrology Prof. Dr Kanakuppi Sadashivappa Bapuji Institute of Engineering and Technology Davangere. Lecture 34 Pneumatic Comparators
Metrology Prof. Dr Kanakuppi Sadashivappa Bapuji Institute of Engineering and Technology Davangere Lecture 34 Pneumatic Comparators (Refer Slide Time: 00:13) (Refer Slide Time: 00:17) I welcome you all
More informationRotary actuators Rotary wing drives Series RAK. Brochure
rochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
More informationFlexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism
Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions
More informationCUPRON NEXT TECHNICAL DATA SHEET
Product description New hard matrix antifouling paint free of copper and organostannic compounds. It provides good seasonal protection for boats that work even in particularly hot and aggressive waters.
More informationHIGH PERFORMANCE FILTERS FOR COMPRESSED AIR & GAS
HIGH PERFORMANCE FILTERS FOR COMPRESSED AIR & GAS P-2000 SERIES Value and Performance Through Advanced Technology P-2000 SERIES FILTERS VALUE AND PERFORMANCE THROUGH TECHNOLOGY State-of-the-art technologies
More informationSeries 10-ZSE30A(F)/10-ISE30A
Series 10-ZSEA(F)/10-ISEA RoHS 2-Color Display High-Precision Digital Pressure Switch Clean series For positive For vacuum/ compound Rated range ISEA 0.1 to 1 MPa How to Order 10 ISEA 01 N M 01 N01 C4H
More informationCNC Grinding Center Model Evolution
CNC Grinding Center Model Evolution High-Precision Tool Grinding Machine with 5 Axes The newest dimension in tool grinding Quality without compromise The Model Evolution has been developed for the production
More informationMODEL T26413, T26414, & T26415 ARBOR PRESS INSTRUCTIONS
MODEL T26413, T26414, & T26415 ARBOR PRESS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction This arbor press is designed
More informationOperating Manual Axis 60mm Self Centering Vise Axis 100mm Self Centering Vise
Operating Manual Including installation and assembly instructions 80000 5-Axis 60mm Self Centering Vise 80100 5-Axis 100mm Self Centering Vise 80300 5-Axis 40mm Fixed Jaw Vise 80400 5-Axis 60mm Fixed Jaw
More informationDisc Caliper Brake Model DBSE
AIR CHAMP PRODUCTS User Manual Disc Caliper Brake Model DBSE i In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to
More informationAir precision chucks APC
Air precision chucks APC MicroCentric GmbH Berblingerstr. 16 71254 Ditzingen / Germany Tel.: +49 (0)7156 17819-0 Fax: +49 (0)7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this
More informationOperating & Maintenance Instructions 320 Dome Blowing Unit
Operating & Maintenance Instructions 320 Dome Blowing Unit Table of Contents 1. On Delivery... 2 2. General Information... 3 3. Dome Blowing Technique... 4 4. Other Shapes... 6 5. Machine Maintenance...
More informationHigh Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
More informationOptimizing Spray Performance with Pulse Width Modulated Flow Control
Experts in Technology Nozzles Control Analysis Fabrication Optimizing Performance with Pulse Width Modulated Flow Control How to improve accuracy and lower operating costs in coating, dosing and other
More informationThe GX Fiber Bed A Novel Mist Eliminator with Improved Aerosol Removal Performances
A publication of CHEMICAL ENGINEERING TRANSACTIONS VOL. 69, 2018 Guest Editors: Elisabetta Brunazzi, Eva Sorensen Copyright 2018, AIDIC Servizi S.r.l. ISBN 978-88-95608-66-2; ISSN 2283-9216 The Italian
More informationPressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
More informationSFP-550. Operating Manual MATSUHIDAI, MATSUDO-CITY, CHIBA JAPAN TEL: FAX:
SFP-550 Operating Manual 296-1 MATSUHIDAI, MATSUDO-CITY, CHIBA 270-2214 JAPAN TEL: +81-47-388-6111 FAX: +81-47-388-4477 Safety Precautions To ensure safe operation and maximize product service life, observe
More informationMODEL T TON HYDRAULIC PRESS INSTRUCTIONS (For Machines Mfd. Since 10/17)
MODEL T1241 20-TON HYDRAULIC PRESS INSTRUCTIONS (For Machines Mfd. Since 10/17) For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Identification
More informationHC Hydraulic Expansion Chucks
Technical Information HC Hydraulic Expansion Chucks design, function, effect, and application features, handling, and action application instructions precision tool length setting torques accessories sealed
More informationHydraulic Clamping Systems
Hydraulic Clamping Systems Hydraulic Swivel clamps, double action Operating pressure max. 250 bar Hydraulic swivel clamps are particularly designed for applications which require high clamping forces and
More informationNON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM)
NON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM) A machining process is called non-traditional if its material removal mechanism is basically
More informationAbsolute pressure gauge with output signal For the process industry Models APGT and APGT43.160, NS 100 and 160
Mechatronic pressure measurement Absolute pressure gauge with output signal For the process industry Models APGT43.100 and APGT43.160, NS 100 and 160 k Applications for further approvals see page 4 WIKA
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationOPERATING USER MANUAL
Serial No. OPERATING USER MANUAL for TEMPERATURE RECORDERS MNW-003 Rev. F 01/04/19 Reorder Stock No. PD1014 Palmer Wahl Instruments, Inc. 234 Old Weaverville Road Asheville, NC 28804 Toll Free: 800-421-2853
More informationPrecision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
More informationTWIN ROD CYLINDERS 6 CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG TWIN ROD CYLINDERS6 CONTENTS TWIN ROD CYLINDERS 6 Features 745 Specifications/Order Codes 747 Inner Construction and Major Parts 748 Dimensions
More informationma output signal with transmitter module. - Adjustable frequency output signal with pulse divider module
/ - ; 0 PSI Advantages / Benefits Wireless easy mounting and dismounting of sensor head by a Turn & Lock technique 3-wire Hall version to interface directly with PLC's (both NPN and PNP) Easy to connect:
More informationProportional Directional Control Valves Size 6
Proportional Directional Control Valves Size 6 Direct operated, positioncontrolled Interface to DIN 2 30 and ISO 0 PN [p max. ] = 35 bar 75079.06.03.06 Description (standard units) Design The proportional
More informationMANUAL BEVELLING AND DEBURRING SYSTEM B15 AIR
MANUAL BEVELLING AND DEBURRING SYSTEM B15 AIR ord. No. 27 220 Operating Instructions for the device Subject to change 1 Table of Contents General Information 3 Description of the machine B15 AIR 3 Identification
More informationPressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
More informationHumidity/temperature measuring instrument
Data sheet testo 635 Humidity/temperature measuring instrument testo 635 Measurement technology for humidity measurement Connection of 2 plug-in probes and 3 wireless probes Measurement of temperature,
More informationClamping filigree parts
Clamping filigree parts August 2005 Getting a good hold on bits and pieces For almost all shapes and sizes of parts there are suitable clamping technologies available on the market. However demands on
More informationPressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Ship building Measurement and control technology
More informationCincom Evolution Line
Evolution and Innovation is the Future Sliding Headstock Type Automatic CNC Lathe Cincom Evolution Line Exceptional productivity and cost performance in a 5-axis ø20 mm machine Non-guide bushing spindle
More informationM20/32. Cincom Innovation Line. Sliding Headstock Type Automatic CNC Lathe. Evolution and Innovation is the Future
M20/32 Sliding Headstock Type Automatic CNC Lathe Cincom Innovation Line Evolution and Innovation is the Future Innovation is having your own vision and creating new technology. M20/32 The market leader
More informationSPECIFICATION SHEET DISSOLVED OXYGEN ANALYZER/TRANSMITTER SYSTEM CONFIGURATION
ISO-400 ISO-900 SPECIFICATION SHEET DISSOLVED OXYGEN ANALYZER/TRANSMITTER Model: ODM-36A FEATURES Microprocessor based 4-wire transmitter suitable for field installation. The unit features isolated inputs
More informationOPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
More informationEN 1092 PN 10 EN 1092 PN 16 JIS B K ANSI B16.5 Class 150 ANSI B16.47 Class 150 BS 10 Table D
HG EN 1092 PN 10 EN 1092 PN 16 JIS 2238 10K ANSI 16.5 Class 150 ANSI 16.47 Class 150 S 10 Table D Stafsjö s knife gate valve HG is a bi-directional valve, particularly well suited for severe operating
More informationSETTING UP THE MODEL 210B-2 SRA
SETTING UP THE MODEL 210B-2 SRA SAFETY PRECAUTIONS FOR THE MODEL 210B-2 SRA System Under Pressure: Shut off air supply and disconnect air hose before disassembling or disconnecting parts. Flying Debris:
More informationcaroma marc newson wall basin mixer
caroma marc newson wall basin mixer water efficient tapware (nominal flow rate = 5 L/min) PLUMBERS INSTALLATION INSTRUCTIONS IS1213A(07/12) Important Information Brazed connections should NOT be made directly
More informationSLIDE VANE FLOW METER SPECIFICATIONS
SLIDE VANE FLOW METER SPECIFICATIONS V20051 17.09 1. Outline Slide vane flow meter is vane type positive displacement flow meter, creating high accuracy measurement and low pressure loss by decreasing
More informationTLR wire System Level Radar. MICROWAVE level meter GENERAL FEATURES OPERATION PRINCIPLE
2-wire System Level Radar TLR3000 MICROWAVE level meter GENERAL The TLR3000 is a non-contact type continuous level meter using microwaves. It detects a level by measuring a reciprocating time of a microwave
More informationEXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 KC-5 KC-8 Pump RPM 638 1022 Motor HP (kw) 0.33 (0.25) 0.50 (0.37) Oil Capacity, qts. (liters) 0.8 (0.76) Forced Drain w/ open suction, qts. (liters) 0.85 (0.80)
More informationPURESTREAM SYSTEM - ASSEMBLY GUIDE
PURESTREAM SYSTEM - ASSEMBLY GUIDE VISIT OUR WEBSITE : www.cagpurification.com our installment procedure videos in the PURESTREAM Piping section. NECESSARY TOOLS FOR INSTALLATION We suggest the use of
More informationTelemetry System. Semester 3rd. Chapter-1 Telemetry Principles. Prof Z D Mehta Instrumentation and control Department Government Polytechnic Ahmedabad
Telemetry System Semester 3rd Chapter-1 Telemetry Principles Prof Z D Mehta Instrumentation and control Department Government Polytechnic Ahmedabad [Type text] Page 0 Telemetry Principles What is Telemetry?
More informationTechnical data sheet. Encapsulator B-390 / B-395 Pro
Encapsulator B-390 / B-395 Pro Technical data sheet Production of functionalized beads and core-shell capsules with narrow size distribution are the key benefits of this system. BUCHI offers the Encapsulator
More informationEHD2. Ultra Thin Film Measurement System
EHD2 Ultra Thin Film Measurement System A fully automated bench top, computer controlled instrument for film thickness measurements of lubricants in the elastohydrodynamic (EHD) lubricating regime EHD2
More informationPower Workholding. Power Workholding n Precision Vises n Zero Point Mounting n Assembly and Handling
Power Workholding Power Workholding n Precision Vises n Zero Point Mounting n Assembly and Handling OUR STORY In 1982 an independent joint venture was established to marry the proven product expertise
More informationFLOMID FX Electromagnetic Flowmeter
FLOMID FX Electromagnetic Flowmeter Working pressure manufacturing according to PED 97/23/CE (Lloyd s Register Certificate Nº 031) Introduction Modular design in two versions: Compact, sensor and electronics
More informationRoundness/Cylindricity Measurement ROUNDTEST RA-2200 Series
Form Measurement Roundness/Cylindricity Measurement ROUNDTEST RA-2200 Series Catalog No.E4385 Roundness/Cylindricity measuring system offering highest precision level in its class, exceptional ease-of-use,
More informationModule-3 Lecture-7 Limit guage-2. (Refer Slide Time: 00:12)
Metrology Prof. Dr. Kanakuppi Sadashivappa Department of Industrial and Production Engineering Bapuji Institute of Engineering and Technology-Davangere Module-3 Lecture-7 Limit guage-2 (Refer Slide Time:
More informationInstruction Manual X97
Index Page Technical data... 2 Dimensions... 3 General description... 4 Selection of cutter... 5 Instruction for grinding... 5 Dimensions of bevel... 7 Bevelling angle... 8 Adjustment: Straight edge (Land)...
More information