BX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications
|
|
- Mildred Bradford
- 5 years ago
- Views:
Transcription
1 BX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications Product data BX 3 battery-actuated fastening tool Nails (For fastening to concrete) X-P 17/20/24 B3 MX X-P 30/36 B3 P7 X-C 20/24 B3 MX (For fastening to steel) X-C: X-P: o 6.5 o Ls o 3 o o 3 Electrical elements to be used with nails L 15.8 X-ECT MX X-UCT MX X-EKS MX X-EKSC MX X-FB MX X-ECH MX X-DFB MX X-EKB MX 8 X-ECC MX X-EHS MX X-ET MX X-TT X-ECT 40 MX General information Material specifications X-P B3 MX/P7, X-S B3 MX Carbon steel, HRC 57.5, 2-10 μm zinc coating X-C B3 MX Carbon steel, HRC 56.5, 5-13 μm zinc coating X-ECT MX, X-EKS MX, X-EKSC MX, Polyamide (halogen and silicon-free), light grey RAL 7035 X-EKB MX, X-ECH MX X-ECT-FR MX, X-EKB-FR MX PBT (silicon free, flame retardant), stone grey RAL 7030 X-UCT MX, X-ET MX HDPE (halogen and silicon free), light grey RAL 7035 X-TT Polyester (PES) X-FB MX, X-DFB MX Galvanized steel sheet, f u = N/mm 2, μm zinc coating X-ECC MX, X-EHS MX Galvanized steel sheet, f u = N/mm 2, μm zinc coating Approvals ICC-ESR 1752 (USA) ETA-16/0301 X-P 20 B3 MX, X-P 24 B3 MX, various electrical elements (see ETA approval Annex A1) 03 /
2 Product data BX 3 battery-actuated fastening tool Threaded studs (For fastening to concrete) X-M B3 P7 (For fastening to steel) X-M B3 P7 M6 Ø 6 [0.236"] Ø 3 [0.118"] 1.5 [0.059"] 7 [0.276"] 24 [0.944"] X-W B3 P7 X-W B3 P7 Ø 6 [0.236"] Ø 6 [0.236"] W6 Ø 3 [0.118"] W6 Ø 3 [0.118"] M6 Ø 6 [0.236"] Ø 3 [0.118"] 1.5 [0.059"] 7 [0.276"] 14 [0.551"] 1.5 [0.059"] 12 [0.472"] 20 [0.787"] 1.5 [0.059"] [0.472"] [0.551"] General information Material specifications: B3 threaded studs Carbon steel shank HRC 57.5 Zinc coating 2 10 μm Applications Examples With nails and elements Flexible or rigid cable conduits with cable ties With threaded studs Fastening cables With nails Cable conduits or light-duty pipes Junction boxes, switch boxes, etc. Drywall tracks to concrete and steel 2 03 / 2017
3 Load data Recommended loads (nails and threaded studs only) Nrec V rec Design conditions Minimum 5 fastenings per fastened unit All visible failures must be replaced X-P B3 and X-C B3 nails (Base material: concrete / sand-lime masonry) N rec [kn] V rec [kn] h ET [mm] X-S 14 B3 nails (Base material: steel) N rec [kn] V rec [kn] Recommended loads and tightening torque Threaded stud N rec [kn] V rec [kn] T rec [Nm] Base material X-M B3 P Concrete, sand-lime X-W B3 P7 masonry X-M B3 P Steel X-W B3 P7 Recommended loads (electrical elements used with nails) Element Maximum service load F max [N] X-ECT (FR) MX 40 X-UCT MX 40 X-EKS MX 11 X-EKSC MX 32 X-FB MX / X-DFB MX 20 X-ECC MX 50 X-EHS MX 80 X-EKB (FR) 4 MX 9 X-EKB (FR) 8 MX 14 X-EKB (FR) 16 MX 18 X-ECH MX 40 Cable trunking X-ET MX /
4 Application requirements Thickness of base material Concrete (for nails Steel hmin d nom and threaded studs) h min = 60mm d nom = 3.0mm tii t II 4.0mm (for nails) t II 6.0mm (for threaded studs) Thickness of fastened material Wooden track: Metal track: t I 27mm t I 2mm Spacing and edge distances (mm) Spacing along track All track ends (cut-outs for doors), secure with 2 nails Fastener spacing max. 30 cm for proprietary light non-load-bearing partition walls with fire classification Distance to edge of concrete / sand-lime masonry Spacing between nails when fastening wood to concrete Distance to edge of fastened material (steel base material) d nom 4 03 / 2017
5 Application limits Steel thickness, tii [mm] S235Jxx S275Jxx S355Jxx Steel strength, R m [N/mm 2 ] Corrosion information X-M B3 P7, X-W B3 P7 The intended use only comprises fastenings which are not directly exposed to external weather conditions or moist atmospheres, i.e. only intended for dry indoor areas. Steel thickness, tii [mm] S235Jxx S275Jxx S355Jxx Base material strength, R m [N/mm 2 ] Fastener selection and system recommendation Fastener program Nails Nail Item no. Shank length (mm) Shank diameter (mm) Base material Steel X-P 17 B3 MX X-P 20 B3 MX X-P 24 B3 MX X-P 30 B3 P X-P 36 B3 P X-C 20 B3 MX X-C 24 B3 MX Concrete / Sand-lime masonry Length recommendation Increasing strenght of base material Increasing thickness of fastened material Threaded studs Threaded studs Item no. Thread Thread Shank Shank Base material size length length diameter (mm) (mm) (mm) X-M B3 P M Steel X-M B3 P M Concrete X-W B3 P W Steel X-W B3 P W Concrete 03 /
6 Fastener recommendations Nail Selector for BX 3 X-C 24 B3 MX X-C 20 B3 MX X-C 24 B3 MX X-C 20 B3 MX X-P 17 B3 MX X-C 36 B3 P7 X-C 24 B3 MX X-C 20 B3 MX X-P 20 B3 MX X-P 20 B3 MX X-P 17 B3 MX X-P 17 B3 MX X-C 24 B3 MX X-C 20 B3 MX X-W B3 P7 X-M B3 P7 X-W B3 P7 X-M B3 P7 Propellant-free For more details and information, please contact your nearest Hilti representative. Fastener guide Item no. Use X-FG B3-ME With nails + elements or only studs X-FG B3-IF With nails or studs only 6 03 / 2017
7 Fastening quality assurance Fastening inspection Nails and studs in concrete / sand-lime masonry Nails and studs in steel h NVS t I hnvs h NVS t I X-C_B3, X-P_B3: h NVS = 2 5 mm X-M B3 P7 X-W B3 P7 h NVS 7 mm 12 mm X-S_B3: h NVS = 2 9 mm t I X-C_B3, X-P_B3: h NVS = 2 3 mm X-M B3 P7 X-W B3 P7 h NVS 7 mm 12 mm Element Concrete h NVS (mm) Steel X-EKB 4/8 MX X-EKB 16 MX X-ECT MX X-UCT MX X-ECH MX X-EKS MX X-EKSC MX X-FB MX X-DFB MX X-ECC MX X-EHS MX X-ET MX* *) With X-ET MX, the h NVS is measured against the cable trunk. Examples 03 /
8 8 03 / 2017
BX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications
BX 3 system BX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications Product data Nails X-C: o 6.5 X-P: o 6.8 (For fastening to concrete) X-P 17/20/24 B3 MX X-P 30/36 B3 P7
More informationBX 3 system: fasteners for Interior Finishing, Mechanical and Electrical and Building Construction applications
Product data BX 3 system BX 3 system: fasteners for Interior Finishing, Mechanical and Electrical and Building Construction applications BX 3 battery-actuated direct fastening tools BX 3-ME BX 3-IF Fasteners
More informationX-ECT MX Electrical Cable Tie, X-EKS MX and X-EMTSC Conduit Clip Fastener
D X-ECTMX, X-EKSMX, X-ECT MX Electrical Cable Tie, X-EKS MX and Conduit Clip Fastener Product data Dimensions X-ECT MX X-EKS MX X-EKSC MX 18 X-GHP 20 X-GN 27 X-EGN 14 X-U 16/22/27 4 12.5 24.5 19 24.9 14
More informationX-EKB, X-ECH Electrical Cable Fasteners
X-EKB, X-ECH Electrical Cable Fasteners Product data Dimensions Single Fastener X-EKB 8/4-FR X-EKB 16 (FR) X-U 37 PH 1 2 4 o8.15 16.8 10 21.5 34 136/104 16.8 10 25 229 o3.7 37 49 o11.8 X-ECH-S (FR) X-ECH-M
More informationX-EKB, X-ECH Electrical Cable Fasteners
X-EKB, X-ECH Electrical Cable Fasteners Product data Dimensions Single Fastener X-EKB 8/4-FR X-EKB 16 (FR) X-U 37 PH 1 2 4 o 8.15 16.8 10 21.5 34 136/104 16.8 10 25 229.7 37 49 o 11.8 X-ECH-S (FR) X-ECH-M
More informationX-P High Performance Nail for Fastening to Concrete and Wood to Steel applications
X-P High Performance Nail for Fastening to Concrete and Wood to Steel applications Product data X-P_ MX Ø 8.2 2.4 X-P_ P8 Ø 8.2 2.4 Ø 4.0 L s L L s L Ø 4.0 Features and Benefits A specially hardened fastener
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2013 Hilti North American Product Technical Guide Volume 1 Direct Fastening. For complete details on this product, including data development, product specifications, general
More informationX-HS Threaded Hanger and X-CC Loop Hanger Systems
5, Threaded Hanger and oop Hanger Systems Product data Dimensions DKH À U Á U Â M5 7.5 25.5 10 o15 5 41 36 o 15 HITI 24 7 9.5 o 4 S dg 2 D o 4 12 1.5 8.5 4.5 o 4 8.5 DKH 48 P8S15 o8 o4 o15 X-U _ P8 Ø 8
More informationDrywall Applications. Electrical and Mechanical Fastenings
DIRECT FASTENING Drywall Applications Battery-actuated fastening tool GX 3 Page 179 Collated nail X-C G3 MX Page 179 Collated nail X-P G3X Page 180 Collated nail X-PN G3 MX Page 180 Collated nail X-GN
More informationDIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast.
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast. Powder-Actuated Tools and Fasteners DX - Light Tools DX 460-F8 Page 140 DX 460 MX Page 141 Consumables X-U, X-C, X-FS, X-HS U, X-M, X-EM Page 142 Insulation
More informationDIRECT FASTENING TECHNOLOGY MANUAL 2018
DIRECT FASTENING TECHNOLOGY MANUAL 2018 Hilti Corporation 9494 Schaan, Liechtenstein P +423-234 2965 www.facebook.com/hiltigroup www.hilti.group Contents Contents Hilti Direct Fastening System Part 1:
More informationHilti HIT-1 / HIT-1 CE Adhesive Anchor System
Concrete Hilti HIT-1 / HIT-1 CE Adhesive Anchor System Injection mortar system Benefits Hilti HIT-1 / HIT-1 CE 300 ml foil tube cartridge Mixer HIT PM HIT-V rods Dispenser: - chemical injection fastening
More informationHUS 6 Screw anchor, Redundant fastening
HUS 6 Screw anchor, Anchor version HUS-A 6 Carbon steel Concrete Screw with hex head HUS-H 6 Carbon steel Concrete Screw with hex head HUS-I 6 Carbon steel Concrete Screw with hex head Benefits - Quick
More informationDX-Kwik X-M6H, X-M8H Threaded Studs and DNH, X-DKH Nails
X-M6H, X-M8H Threaded Studs and DNH, X-DKH Nails Produt data Dimensions General information X-M6H- -37 FP8 Material speifiations M6 o 3.7 Carbon steel shank: HRC 58 g 37 Zin oating: 5 20 μm Reommended
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2013 Hilti North American Product Technical Guide Volume 1 Direct Fastening. For complete details on this product, including data development, product specifications, general
More informationGovernment Letters Job Reference 18 21
Hilti X-CR Nail Product Information 2 6 X-CR Nails DX 460 Tool DX 36 Tool Technical data 7-11 Government Letters 12 16 Country of Origin 17 Job Reference 18 21 Make your submission simple! To download
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 1: Direct Fastening, Edition 15.
The following excerpt are pages from the North American Product Technical Guide, Volume 1: Direct Fastening, Edition 15. Please refer to the publication in its entirety for complete details on this product
More informationAnchor HSA Fastening. Technology Manual HSA. Stud anchor. Version /
Anchor HSA Fastening Stud anchor Technology Manual HSA Stud anchor Version 2016-09 09 / 2016 1 HSA Stud anchor Anchor version Benefits HSA Carbon steel with DIN 125 washer HSA-F Carbon steel hot dipped
More informationHK I. Anchor size (carbon steel) HK6 HK6L HK8 Resistance F Rk [kn] 2,0 5,0 5,0
HK HK I Anchor version Benefits - well proven - small drill bit diameter - for fixing in cracked concrete, redundant fastening only, e.g. suspended ceilings a ) Redundant fastening only Approvals / certificates
More informationSpecifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish
Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish ASTM F 1667-05 Table 15 Type 1, Style 10 - Common Nails Size Length
More informationTECHNICAL DATA SHEET
Certificates ETA 16/0596 ETA 16/0595 09.10.2016 Page 1 of 6 Certification for anchoring of threaded bars in non-cracked concrete (Option 7) Certification for anchoring in solid and hollow masonry, with
More informationMaterial Specifications Technical Data
3.4.3.1 Product 3.4.3.2 Material Speciications 3.4.3.3 Technical Data 3.4.3.4 Installation Instructions 3.4.3.5 Ordering Information 3.4.3.1 Product Hilti provides a wide range of solutions for the attachment
More informationLetter of Transmittal/Submittal
Letter of Transmittal/Submittal FROM: TO: Baker Concrete Construction 1904 Jasper Street DATE JOB NUMBER 09/23/10 Aurora, CO 80011 9921 303.367.8111 ATTENTION Nick Dewald 937.536.9000 RE: Bruce Herman
More informationHUS3 redundant SCREW ANCHOR. Technical Datasheet Update: Dec-17
HUS3 redundant SCREW ANCHOR Technical Datasheet Update: Dec-17 HUS3 Screw anchor Ultimate performance screw anchor for redundant fastening applications Anchor version HUS3-H (R) HUS3-C HUS3-A Benefits
More informationUsing Hilti powderactuated. to install suspended metal-framed gypsum board ceilings. The application. Selection of fasteners.
Using Hilti powderactuated fasteners to install suspended metal-framed gypsum board ceilings The application Selection of fasteners Technical data Procedures Fastening quality 0 Using powder-actuated fasteners
More informationDrive Pins. Powder Actuated Systems. Powder Actuated Systems
Standard Drive Pins for Concrete, Masonry and Steel Drive Pins designed for fastening to standard strength concrete, masonry and steel up to a maximum of 8mm. Part No Drive Pin Length (thickness to steel)
More informationEuropean Technical Assessment. ETA-14/0426 of 15 December English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-14/0426 of 15 December 2014 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationHSL-3 / HSL-3-R EXPANSION ANCHOR. Technical Datasheet Update: Oct-18
HSL-3 / HSL-3-R EXPANSION ANCHOR Technical Datasheet Update: Oct-18 HSL-3 / HSL-3-R expansion anchor Ultimate-performance heavy-duty expansion anchor Anchor versions a) Condition valid only for HSL-3 carbon
More informationTECHNICAL DATASHEET MULTI ANCHOR GREEN PLUS styrene-free hybrid formulation chemical anchor
p. 1/6 Certificates ETA 16/0596 Certification for anchoring of threaded bars on non-cracked concrete (Option 7) ETA 16/0595 Certification for anchoring on solid and hollow masonry, with threaded bar or
More informationInternal threaded version: HSC-I carbon steel internal version HSC-IR Stainless steel version (A4) Hilti anchor design software
Anchor version Benefits Internal threaded version: HSC-I carbon steel internal version HSC-IR Stainless steel version (A4) the perfect solution for small edge and space distance suitable for thin concrete
More informationHDA-P HDA-PR HDA-PF Anchor for presetting. HDA-T HDA-TR HDA-TF Anchor for through-fasting. Nuclear ICC. Steel failure
Anchor version Benefits HDA-P HDA-PR HDA-PF Anchor for presetting HDA-T HDA-TR HDA-TF Anchor for through-fasting suitable for non-cracked and cracked concrete C 20/25 to C 50/60 mechanical interlock (undercut)
More informationIP30 floor Box wooden floors
87045 LIMOGES Cedex Phone : 05 55 06 87 87 Fax : 05 55 06 88 88 CONTENTS PAGES 1.Range 1 2.Backboxes installation 2 à 7 3.Technical characteristics 8 à 9 4.Material characteristics 9 Cat.Nos 89688 1 RANGE.
More informationHSL-3 / HSL-3-R EXPANSION ANCHOR. Technical Datasheet Update: Dec-17
HSL-3 / HSL-3-R EXPANSION ANCHOR Technical Datasheet Update: Dec-17 HSL-3 / HSL-3-R expansion anchor Ultimate-performance heavy-duty expansion anchor Anchor versions a) Condition valid only for HSL-3 carbon
More informationEuropean Technical Assessment. ETA-14/0426 of 21 December English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-14/0426 of 21 December 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationTrusted ICC ES. Issued 06/2018 HILTI, INC. Evaluation. report, or as to any. ICC-ES Evaluation
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg ESR 4185 Issued 06/2018 This report is subject to renewal 06/2019. SECTION: 05 05 23
More informationHVU2 adhesive capsule Anchor design (ETAG 001) / Rods&Sleeves / Concrete
HVU2 adhesive capsule Anchor design (ETAG 001) / Rods&Sleeves / Concrete Anchor version Benefits HVU2 Mortar capsule Anchor rod: HAS HAS-R HAS-HCR (M8-M30) Anchor rod: HAS-E HAS-E-R HAS-E-HCR (M8-M30)
More informationWELDA FASTENING PLATES
FASTENING PLATES Author: Markus Junes, M. Sc. Civ. Eng. R&D Manager, Peikko Group 1. INTRODUCTION Peikko Group has launched a new family of Fastening Plate products with resistances calculated on the basis
More informationInstallation Systems INSTALLATION SYSTEMS
INSTALLATION SYSTEMS 230 MM Channel System MM Channel System Page 230-237 MQ Channel System MQ Channel System Page 237-248 MC Channel System MC Channel System Page 249 Accessories Beam Clamp MAB Page 249
More informationSigma Fasteners, Inc. Section 7
DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings
More informationPRODUCT INFORMATION 0.145/0.130" 100 5,
PROUCT INFORMATION Fasteners.300" Head rive Pins rive pins with a.300" head are designed for permanently fastening a fixture to concrete, some types of concrete block, and A36 or A572 structural steel.
More information4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
More informationS-BT screw-in stainless steel and carbon steel threaded studs
S-BT screw-in stainless steel and carbon steel threaded studs Product data Dimensions S-BT-MR M10/15 SN 6 S-BT-MR M10/15 SN 6 AL**) S-BT-MR W10/15 SN 6 S-BT-MR W10/15 SN 6 AL**) S-BT-MR M10/15 SN 5 ***)
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More informationCONTENTS. Hammerscrews White Zinc Plated 2 Hammerscrews Stainless Steel A Nylon Frame Anchors Yellow Zinc Plated 3 Nylon Plug 3
C CONTENTS CONTENTS PAGE 1 HAMMERSCREWS Haerscrews White Zinc Plated 2 Haerscrews Stainless A2-304 2 2 NYLON FRAME ANCHOR Nylon Frame s Yellow Zinc Plated 3 Nylon Plug 3 3 WINDOW FRAME ANCHOR Window Frame
More informationDirect Fastening Systems. Hilti. Outperform. Outlast.
Direct Fastening Systems Hilti. Outperform. Outlast. DX_Entry.indd 214 31.5.2007 17:35:57 Uhr Direct Fastening Systems Gas-driven tools & fasteners GX 100 Gas-Driven Fastening System 218 X-ECT cable tie
More informationESR-2024* Reissued September 1, 2011 This report is subject to renewal September 1, 2013.
ICC-ES Evaluation Report ESR-2024* Reissued September, 20 This report is subject to renewal September, 20. www.icc-es.org (800) 42-68 (62) 699-04 A Subsidiary of the International Code Council DIVISION:
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationFastener selection guide. Concrete fastener selection Selecting the right nail for concrete What determines nail performance
Concrete fastener selection Selecting the right nail for concrete What determines nail performance Hilti Direct Fastening systems are designed to achieve maximum performance in a wide range of applications.
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationHPD Aerated concrete anchor. Approvals / certificates. Basic loading data (for a single anchor)
HPD Anchor version HPD Benefits - anchor for autoclaved aerated concrete - maximum use of base material capacity - setting without drilling Autoclaved aerated concrete Fire resistance Sprinkler approved
More informationFaçade Solution. Produces façade & cassette solutions
Façade Solution Façade Solution Produces façade & cassette solutions The company produces facade solutions using its cutting edge Qatari manufacturing facility. All facades are manufactured & delivered
More informationFASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
More informationLateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later
Lateral Support Decks over 24 above grade require lateral support* *Exceptions to be discussed later Decking Types of Decking: -2x4s & 2x6s -five quarter span rated decking boards -Wood plastic composite
More informationDYNABOLT PLUS ANCHORS DYNABOLT PLUS. Anchor Details. Installation Ramset Regions. Site Map. Home Page. Performance. Next Page. Date of Issue: 9/98
Date of Issue: 9/9 Dynabolt Plus is a general purpose all steel medium duty through fixing for masonry and concrete. For fixing to Concrete, solid and hollow brick, masonry, natural stone. Surface Finish
More informationPURE 150-PRO EPOXY ADHESIVE ANCHOR
ONLINE ANCHOR DESIGN SOFTWARE PURE 150-PRO EPOXY ADHESIVE ANCHOR Fully featured and easy to use interface Easy 5 step anchor design with 3D modelling of fastening Professional specification of DEWALT fastenings
More informationREPORT HOLDER: DEWALT 701 EAST JOPPA ROAD TOWSON, MARYLAND EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2024 Reissued 09/2017 This report is subject to renewal 09/2018. DIVISION: 03 00
More informationULT R A SPAC E SAV E R
ULT R A SPAC E SAV E R Double Capacity, Modular Construction The Ultra Space Saver provides easy and ample space for u-lock security on nearly any bike, including bikes with fenders. Thanks to design enhancements,
More informationGloEx Product List Assessment-Nail Selection
Item 01 Common Nail Bright Finish/HDG Flat Smooth/Ring FOR GENERAL CONSTRUCTION, CARPENTRY AND FRAMING. MADE TO CONFORM TO ASTM F1667. : Electrogalvanized option available Package s 3D 1-1/4" 14 13/64"
More informationRipple Construction Products Pvt Ltd
26 July 2017 1 Masonry: There is a tremendous variety of masonry bricks on the market. The different types of bricks (e.g. clay, sand-lime, or concrete bricks) are composed of different materials and are
More informationREPORT HOLDER: JAACO CORPORATION NORTHEAST 68 TH STREET, SUITE C-130 REDMOND, WASHINGTON EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2961 Reissued 09/2017 This report is subject to renewal 09/2019. DIVISION: 05 00
More informationPowder Actuated Fasteners - Drive Pins
122 Drive Pins Standard Pins Drive pins with a.300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured
More informationHilti, Inc. November Dallas Parkway, Suite 1000 Plano, Texas Toll Free Website Guide Specification
Hilti, Inc. November 2015 7250 Dallas Parkway, Suite 1000 Plano, Texas 75024 Toll Free 800-879-8000 Website www.us.hilti.com Guide Specification Specifier Notes: This guide specification is written in
More informationHilti HIT-HY 200 with HIT-Z
Hilti Injection Mortar System Benefits Hilti -R 500 ml foil pack (also available as 330 ml foil pack) Static mixer no cleaning required: zero succeptability to borehole cleaning conditions with dry and
More informationTO O L K IT. Public Bike Repair
TO O L K IT Public Bike Repair The Dero Tool Kit includes all the necessary tools to perform most routine maintenance and adjustments on most bikes. All the tools are securely fastened with stainless steel
More informationSubject of approval: fischer concrete screw ULTRACUT FBS II for the temporary fastening of building site equipment
Date: Reference: 13 July 2016 I 25-1.21.8-49/15 Approval number: Validity Z-21.8-2049 from: 13 July 2016 Applicant: fischerwerke GmbH & Co. KG Klaus-Fischer-Straße 1 72178 Waldachtal to: 13 July 2021 Subject
More informationCollins Engineers Palmetto Islands County Park Boardwalk Repairs 03/28/2014 SECTION ROUGH CARPENTRY
PART 1 GENERAL 1.1 RELATED SECTIONS SECTION 061000 ROUGH CARPENTRY A. Drawings and general provisions of the Construction Contract, including General Conditions and Division 1 Specification Sections, apply
More informationPEC-TA Cast-in Channels and Bolts. Certified German quality for high-end fixing solutions. Advantages of using PEC Cast-in Channels.
Fixing Technology s and Bolts PEC Cast-in Channels are ideally suited for quick, reliable and cost-efficient fixing of different construction elements. The possibility of making simple and flexible adjustments
More informationPlease direct powder-actuated and screw fastening technical inquiries to your local Hilti Field Engineer or Technical Support at
Section 3.1.2.8 Screws should only be used in non-corrosive applications, regardless of their coating, unless they are specifically listed as being suitable for outdoor or exposed conditions. More detailed
More informationENGINEERED BUILDING PRODUCTS. SplitHanger. mitek.com.au
ENGINEERED BUILDING PRODUCTS SplitHanger mitek.com.au S p l i t H a n g e r SUITABLE FOR VARIOUS WIDTHS OF TIMBER BEAM APPLICATION: SplitHangers are versatile hangers that provide a heavy duty connection
More informationWedge Type Anchors. Trubolt. Wedge Anchor ADVANTAGES
CONCRETE ANCHORING SPECIALISTS Dependable, Heavy-Duty, Inspectable, Wedge Type Expansion Anch 2015 IBC Compliant DESCRIPTION/SUGGESTED SPECIFICATIONS Wedge Type Anchs SPECIFIED FOR ANCHORAGE INTO CONCRETE
More informationC O N S T R U C T I O N F A S T E N E R S S T E E L POWDER ACTUATED CARBIDE DRILL BITS
C O N S T R U C T I O N F A S T E N E R S F O R C O N C R E T E & S T E E L MECHANICAL ANCHORS ADHESIVE ANCHORS HOLLOW WALL ANCHORS POWDER ACTUATED GAS FASTENING ROOFING FASTENERS CARBIDE DRILL BITS INTRODUCTION
More informationInstallation Systems. Hilti. Outperform. Outlast.
Systems Hilti. Outperform. Outlast. 446 Systems MM Channel System (galvanized) MM channels MM connectors 454-457 458-465 MQ Channel System (galvanized) MQ channels 466-469 MQ Connectors 470-480 MQ brackets
More informationULT R A S PACE SAV E R SQ UA R E D
ULT R A S PACE SAV E R SQ UA R E D Hip to be Square Dero s Ultra Space Saver Squared offers high-security, vertical bike parking. Adjustable sliding arms make it easy for customers to best utilize their
More informationB. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationB. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationTI: Efficient self tapping fasteners into concrete without plugs
TI: Efficient self tapping fasteners into concrete without plugs Application specific fastener solutions for use either with solid or pre-cast concrete substrates are highly sought after. Indeed, some
More informationHSV EXPANSION ANCHOR. Technical Datasheet Update: Dec-17
HSV EXPANSION ANCHOR Technical Datasheet Update: Dec-17 HSV Expansion anchor Economical expansion anchor for uncracked concrete Anchor version HSV (F) (M8-M16) HSV-BW (M8-M16) Benefits - Torque-controlled
More informationSCREW FASTENER SELECTION FOR COLD-FORMED STEEL FRAME CONSTRUCTION
test TECHNICAL NOTE On Cold-Formed Steel Construction $5.00 Cold-Formed Steel Engineers Institute Washington, DC www.cfsei.org 866-465-4732 SCREW FASTENER SELECTION FOR COLD-FORMED STEEL FRAME CONSTRUCTION
More informationITB TECHNICAL APPROVAL AT /2011
INSTYTUT TECHNIKI BUDOWLANEJ P L 0 0 6 1 1 W A R S A W, u l. F I L T R O W A 1 Phone: (48 22) 825-04-71; (48 22) 825-76-55; fax (48 22) 825-52-86 M e m b e r o f t h e E u r o p e a n U n i o n o f A g
More informationHUS-V SCREW ANCHOR. Technical Datasheet Update: Dec-17
HUS-V SCREW ANCHOR Technical Datasheet Update: Dec-17 HUS-V Screw anchors Economical screw anchor with hex head Anchor version Benefits - High productivity- less drilling and fewer operations than with
More informationCoatings ASTM B117 SST Salt Spray Test Kesternick Phosphate Zinc E-Coat Dip Spin Coatings
Head and Thread types Coatings ASTM B117 Two major types of coating tests: SST Salt Spray Test screws are placed in a container and a salt solution is sprayed on the screws for a number of hours, checking
More informationDesign Guide Pryda Connectors for Steel Framing
Pryda Connectors for Steel Framing Copyright: (c) Pryda Australia A Division of ITW Australia November 2012 November 2012 Design Guide Pryda Connectors for Steel Framing INDEX General Notes General information
More informationTYPE APPROVAL CERTIFICATE
Page 1 / 5 File number: ACM 139/1905/2 Product code: 0226H This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com TYPE APPROVAL CERTIFICATE
More informationSafety switches with slotted hole lever
Safety switches with slotted hole lever Selection diagram C1 C C C4 C5 Straight slotted hole lever Slotted hole lever at the left Slotted hole lever at the right (without bend) Slotted hole lever at the
More informationGeneral Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
More informationDIVISION 6 WOOD AND PLASTICS
DIVISION 6 WOOD AND PLASTICS PART 1 - GENERAL 1.01 SUMMARY A. This Section includes the following: 1. Wood framing. 2. Wood supports. 3. Wood blocking. 4. Wood cants. 5. Wood nailers. 6. Wood furring.
More informationCONTENTS CABLE MANAGEMENT AND
CONTENTS CABLE MANAGEMENT SECTION 9 SECTION 9 CABLE MANAGEMENT AND ASSOCIATED PRODUCTS.................................91 PIN CLIPS H335B SERIES.......................................92 COPPER EARTH RODS.........................................92
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationESR-1799 Reissued April 2014 This report is subject to renewal June 1, 2015.
ICC-ES Evaluation Report www.icc-es.org (800) 42-6587 (562) 699-054 ESR-799 Reissued April 204 This report is subject to renewal June, 205. A Subsidiary of the International Code Council DIVISION: 0 00
More informationWALL TO FABRICATED FLOOR
WALL TO FABRICATED FLOOR PERIMETER WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN PARTITION WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN
More informationMulti-Institutional Academic Health Science & Research Center Evansville, IN
SECTION 06 1053 - MISCELLANEOUS ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Division 01 Specification
More informationOptiLine 45 Floor boxes
OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with
More informationPURE150-PRO CHEMICAL ANCHOR
PURE150-PRO CHEMICAL ANCHOR www.dewalt.com/anchors FAST CURING & HIGH STRENGTH ADHESION. The Pure150-PRO is a two-component high strength epoxy adhesive anchoring system designed for bonding steel elements
More informationThread protection accessories are installed at the MODIX production factory and delivered with couplers.
Installation of MODIX Rebar Coupler Identification of the product The type of MODIX Rebar Coupler can be identified by the marking on the product. Size of the Coupler can be identified also according to
More information10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS
10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS 10x12 WOOD SKID FLOOR FLOOR SYSTEM FOR 10x12 TRICO AND FLORA SHEDS RAW MATERIALS LIST: 2 (9) FLOOR FRAMING AND SHEATHING: 1) BAND BOARD 2 x 6 x 12 PRESSURE
More informationICC-ES Evaluation Report Reissued June 1, 2011 This report is subject to renewal in one year.
ICC-ES Evaluation Report www.icc-es.org (800) 42-658 (562) 699-054 ESR-99* Reissued June, 20 This report is subject to renewal in one year. A Subsidiary of the International Code Council DIVISION: 0 00
More informationDowntown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
More informationDIVISION: CONCRETE SECTION: CONCRETE ANCHORS REPORT HOLDER: HILTI, INC. EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 42 6587 (562) 699 054 www.icc es.org ESR 279 Reissued 08/2018 This report is subject to renewal 08/2020. DIVISION: 0 00 00 CONCRETE
More informationStandard Specification for Carbon and Alloy Steel Nuts [Metric] 1
Designation: A 563M 04 METRIC Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1 This standard is issued under the fixed designation A 563M; the number immediately following the designation
More informationTech Guide. Screw Anchor Performance Why use a screw anchor? Ease in installation
Why use a screw anchor? Screw anchors are used in medium duty applications that normally require faster installation time, close concrete edge distance, close anchor spacing and removability of anchor.
More information