Installation Systems. Hilti. Outperform. Outlast.

Size: px

Start display at page:

Download "Installation Systems. Hilti. Outperform. Outlast."

Alexis Reynolds
5 years ago
Views:

1 Systems Hilti. Outperform. Outlast. 446

Systems MM Channel System (galvanized) MM channels MM connectors 454-457

470-480 MQ brackets 469-470 MC Channel System (galvanized) Overview MC system

(galvanized) 482 484-490 Beam clamp MAB 491 Threaded rod cutter 495 Threaded

clamps Overview Pipe rings 496 Pipe ring MP-LHI 499 Pipe ring MP-PI Pipe ring

hanger LH Sprinkler pipe hanger MP-SP Refrigeration pipe ring MI-CF

506-507 508 509 MQ System (hot-dip galvanized) MQ channels HDG 511-516 MQ

MC channels HDG 526-528 MC connectors HDG 529-536 MC brackets HDG 528-529

System (stainless steel) MQ channels SS 540-543 MQ connectors SS 544-547 MQ

547-549 MI System (heavy-duty supports) MI Girders MI Connectors 551 551-564

2 Systems MM Channel System (galvanized) MM channels MM connectors MQ Channel System (galvanized) MQ channels MQ Connectors MQ brackets MC Channel System (galvanized) Overview MC system 481 MC brackets 483 MC channels MC connectors Base connectors & accessories (galvanized) Beam clamp MAB 491 Threaded rod cutter 495 Threaded rods, washers, nuts, bolts Pipe Rings (galvanized), Hangers and Riser clamps Overview Pipe rings 496 Pipe ring MP-LHI 499 Pipe ring MP-PI Pipe ring MP-HI Heavy-duty pipe ring MP-MI Heavy-duty pipe ring MP-MXI Sprinkler pipe hanger LH Sprinkler pipe hanger MP-SP Refrigeration pipe ring MI-CF Refrigeration pipe ring MIP-M Clevis hanger MQ System (hot-dip galvanized) MQ channels HDG MQ connectors HDG MQ brackets HDG MC System (hot-dip galvanized) MC channels HDG MC connectors HDG MC brackets HDG Hot-dip Galvanized Parts Threaded rods, washers, nuts, bolts MQ System (stainless steel) MQ channels SS MQ connectors SS MQ brackets SS 543 Stainless Steel Parts Threaded rods, washers, nuts, bolts MI System (heavy-duty supports) MI Girders MI Connectors Ventilation System Perforated band hanger 565 Air duct brackets MVA Systems Perforated band LB 447

Systems Pipe fastening made easy SIMPLE... CLICK AND TIGHTEN. You have the pipes, we supply the rest the complete system for all of your pipe fastening needs.

Surprisingly simple. Pipe fastening made easy. A simple click is all it takes. For efficient assembly. Even the trickiest jobs become easy with the new Hilti MM system.

It s not only incredibly quick and convenient subsequent adjustment before final tightening simply couldn t be easier.

Preassembled parts save time and made the installation easier and more convenient. The range of versatile MM-C channels covers all common applications.

3 Systems Pipe fastening made easy SIMPLE... CLICK AND TIGHTEN. You have the pipes, we supply the rest the complete system for all of your pipe fastening needs. Cut pipes and installation channels easily, align them precisely, work cordlessly and install firestop solutions for maximum safety. Experience Hilti s technological lead. Surprisingly simple. Pipe fastening made easy. A simple click is all it takes. For efficient assembly. Even the trickiest jobs become easy with the new Hilti MM system. Simply push the connectors into the channel. The threaded plate engages securely in the toothed profile with an audible click during initial assembly. It s not only incredibly quick and convenient subsequent adjustment before final tightening simply couldn t be easier. The advantages of the new MM system at a glance Clever system for quick installation parts simply click together during initial assembly. Preassembled parts save time and made the installation easier and more convenient. The range of versatile MM-C channels covers all common applications. The flat head of the HUS-P screw anchor allows easy subsequent repositioning of the connectors even along the 16 mm channel. With the new beam clamps, MM channels can be fastened easily at the beam from both sides of the channel. The click-together MM channel system HUS-P screw anchor MM-T beam clamp 448

Systems You have the pipes, we supply the rest the complete system for all of your pipe fastening needs.

of jobs such as cutting pipes and channels to length.

attachment for virtually dustless drilling.

Reduction, the TE 60-ATC Combihammer offers maximum working comfort and safety for making pipe penetrations

CP 660 firestop foam is the simple solution for sealing round flammable and non-flammable pipes in openings

4 Systems You have the pipes, we supply the rest the complete system for all of your pipe fastening needs. With its tremendous 36V power, the compact WSR 36-A cordless reciprocating saw is ideal for a whole range of jobs such as cutting pipes and channels to length. The new TE 6-A36-AVR cordless rotary hammer can be fitted with its own self-contained dust removal attachment for virtually dustless drilling. Featuring the quick-acting safety cut-out known as Active Torque Control (ATC) plus Active Vibration Reduction, the TE 60-ATC Combihammer offers maximum working comfort and safety for making pipe penetrations and through holes in all kinds of jobs. CP 660 firestop foam is the simple solution for sealing round flammable and non-flammable pipes in openings where access is difficult. Innovative solutions for fastening piping. Systems PMC 46 Combilaser WSR 36-A cordless reciprocating saw MM-C installation channel MPN-RC pipe ring TE 6-A Li cordless rotary hammer SIW 14-A cordless impact screwdriver / HUS-P screw anchor TE 60-ATC Combihammer CP 644 firestop collar 449

Systems Air conditioning and ventilation

5 Systems Air conditioning and ventilation supports Electrical cable trays supports Elevator supports 1 System specially developed for ventilation and AC applications 2 Can be quickly modified or adapted to accomodate changing site situations 3 Easy and quick installation of supporting structures for elevator support and anchoring to any type of base materials. 450

Systems Mechanical and electrical supports in

Pipe supports with expansion movement capability 4

planning work. High strength and stability.

6 Systems Mechanical and electrical supports in mechanical room Air conditioning equipment support Pipe supports with expansion movement capability 4 Modular design reduces the need for detailed planning work. High strength and stability. 5 High corrosion protection-system available in hot dipped galvanised and stainless steel. 6 Complete pipe rings offer to be used in most of mechanical applications. Systems 451

Systems PROFIS PROFIS Profis is a Hilti PC applications for the static design of 3D structures assembled from Hilti channel installation system components.

Features and Functions - Design and static calculation of 3D support structures for pipes, cable trays and ventilation ducts - Design of structures to be fastened to

Calculations for the static verification of structures with detailed report: Drawing (3D model) of the structure The applicable data Comments Calculation results Parts lists

Entering the data in the design data table Features and Functions 3D design window: The 3D view of the structure can be zoomed and shifted using the mouse or program buttons

7 Systems PROFIS PROFIS Profis is a Hilti PC applications for the static design of 3D structures assembled from Hilti channel installation system components. It is suitable for use with Microsoft Windows. Features and Functions - Design and static calculation of 3D support structures for pipes, cable trays and ventilation ducts - Design of structures to be fastened to concrete or to steel beams - Graphical presentation of 3D structures on the PC screen - 3D structures can be exported to PDS and PDMS as well as other CAD programs - Calculations for the static verification of structures with detailed report: Drawing (3D model) of the structure The applicable data Comments Calculation results Parts lists Working with PROFIS The data can be entered by the following means: - Using the buttons on the screen and/or - Clicking on the corresponding component or dimension and/or - Entering the data in the design data table Features and Functions 3D design window: The 3D view of the structure can be zoomed and shifted using the mouse or program buttons The button at the edge of the design window can be used to create a 3D structure Left side of screen: Project Explorer showing structure of the project Creation of instullation sub-project Creation of parts lists As an alternative to the design window, models can also be created or modified by entering data in the table page 5 452

Systems Products Characteristics System MM Light and Medium-duty Channel Innovative system Easy and quick installation Minimum parts for a diversity of applications Suitable for most light and medium

quickly modified or adapted to accommodate changing site situations Labour saving design with one-man installation Greatly reduce the need for welding and drilling Preassembled angle pieces allow

galvanized and stainless steel Design software support Suitable for most mechanical and electrical support applications Horizontal and vertical heating pipe supports with expansion movement

equipment and machinery Suspending ceiling supports System MC Medium-Duty Channel High flexibility and 3D capability with fewer connection parts The innovative connection technology with 3D channel

8 Systems Products Characteristics System MM Light and Medium-duty Channel Innovative system Easy and quick installation Minimum parts for a diversity of applications Suitable for most light and medium mechanical and electrical support applications Ventilation duct supports Electrical cable trays supports System MQ Medium-Duty Channel Modular 3D system with unlimited number of connections Can be quickly modified or adapted to accommodate changing site situations Labour saving design with one-man installation Greatly reduce the need for welding and drilling Preassembled angle pieces allow rapid assembly, easy positioning and fast removal Modular design reduces the need for detailed planning work High strength and stability High corrosion protection-system also available in hot dipped galvanized and stainless steel Design software support Suitable for most mechanical and electrical support applications Horizontal and vertical heating pipe supports with expansion movement capability Vertical and horizontal fresh and waste water pipes fixing Ventilation duct supports Chilled water pipe supports Electrical cable trays and long bar supports Supporting industrial equipment and machinery Suspending ceiling supports System MC Medium-Duty Channel High flexibility and 3D capability with fewer connection parts The innovative connection technology with 3D channel design Compatible with MQ and MI Hilti installation systems Available in pre galvanized and hot-dipped galvanized coating Design software support available Electrical and instrumentation supports Integrated floor supports (Raised floor) Horizontal and vertical pipe supports Ventilation duct supports where 3D connectivity is required Suspending ceiling supports Supporting industrial equipment and machinery Busbar support System MI Industrial System Complete compatibility with MQ system High corrosion resistance Dynamic load tested System parts can weigh up to 50% less than conventional structures Non-welding - high flexibility PROFIS 3D support design software available Suitable for industrial pipes and cable tray support applications 3D applications Petrochemical applications Riser floor applications Elevator support Systems 453

9 Channel Systems channel MM-C-16 Fastening ventilation ducts and cable trays Fastening light to medium-duty pipe runs Recommended for use in dry interiors S250GD - DIN EN Sendzimir galvanized C-profile with serrated edges Reinforced slots for greater versatility Grid dimensions make installation and cutting easier Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MM-C-16 2m 16 mm 2 m 1 mm 565 g RAL-GZ 655-C 16 m MM-C-16 3m 16 mm 3 m 1 mm 565 g RAL-GZ 655-C 3 m

10 Channel Systems channel MM-C-30 Fastening ventilation ducts and cable trays Fastening light to medium-duty pipe runs Recommended for use in dry interiors S250GD - DIN EN Sendzimir galvanized C-profile with serrated edges Reinforced slots for greater versatility Grid dimensions make installation and cutting easier Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MM-C-30 3m 30 mm 3 m 1 mm 779 g RAL-GZ 655-C 3 m MM-C-30 3m M10 30 mm 3 m 1 mm 779 g RAL-GZ 655-C 18 m Systems 455

11 Channel Systems channel MM-C-36 Fastening ventilation ducts and cable trays Fastening light to medium-duty pipe runs Recommended for use in dry interiors S250GD - DIN EN Sendzimir galvanized C-profile with serrated edges Reinforced slots for greater versatility Grid dimensions make installation and cutting easier Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MM-C-36 3m M10 36 mm 3 m 1.75 mm 1287 g RAL-GZ 655-C 18 m

Channel Systems channel MM-C-45 Fastening ventilation ducts and cable trays Fastening light to medium-duty pipe runs S250GD - DIN EN 10346 Sendzimir galvanized Recommended for use in dry interiors

12 Channel Systems channel MM-C-45 Fastening ventilation ducts and cable trays Fastening light to medium-duty pipe runs S250GD - DIN EN Sendzimir galvanized Recommended for use in dry interiors C-profile with serrated edges Reinforced slots for greater versatility Grid dimensions make installation and cutting easier Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MM-C-45 3m 45 mm 3 m 1.75 mm 1875 g RAL-GZ 655-C 3 m Systems 457

13 Channel Systems Bracket MM-B-30 For fastening light to medium-duty pipe runs For fastening ventilation ducts and cable trays Recommended for use in dry interiors Serrated C-section Reinforced slots for greater versatility and rigidity Matched to anchor loading capacity Material channel: S235 JR - DIN EN , Material plate: S355 MC - DIN EN Galvanized Ordering designation Profile Length - L Material thickness Weight Sales pack Item number MM-B-30/200 MM-C mm Channel: 1 mm, Baseplate: 4 mm 278 g 10 pc MM-B-30/300 MM-C mm Channel: 1 mm, Baseplate: 4 mm 356 g 10 pc Bracket MM-B-36 For fastening light to medium-duty pipe runs For fastening ventilation ducts and cable trays Recommended for use in dry interiors Serrated C-section edge Elongated holes with flanged edges for greater versatility and strength Designed to match anchor loads Material channel: S235 JR - DIN EN , Material plate: S355 MC - DIN EN Galvanized Ordering designation Profile Length - L Material thickness Weight Sales pack Item number MM-B-36/300 MM-C mm Channel: 1.75 mm, Baseplate: 6 mm 585 g 10 pc MM-B-36/450 MM-C mm Channel: 1.75 mm, Baseplate: 6 mm 778 g 10 pc MM-B-36/600 MM-C mm Channel: 1.75 mm, Baseplate: 6 mm 971 g 10 pc

Channel Systems Angle brace MM-AB Constructing wall brackets with various cantilever lengths Support for all MM system brackets fastened on walls Allows easy customization

5 mm 230 g 10 pc 418772 Pipe ring saddle MM-S Installing threaded rods for pipe and air duct suspension systems of threaded studs for fastening pipes Suitable for all three

14 Channel Systems Angle brace MM-AB Constructing wall brackets with various cantilever lengths Support for all MM system brackets fastened on walls Allows easy customization of stand-alone structures S235JR - DIN EN Galvanized Ordering designation Height - H Length - L Material thickness Weight Sales pack Item number MM-AB 202 mm 202 mm 2.5 mm 230 g 10 pc Pipe ring saddle MM-S Installing threaded rods for pipe and air duct suspension systems of threaded studs for fastening pipes Suitable for all three MM channel profiles Can be fitted and removed without need for tools Easy alignment in the right position S355 MC - DIN EN Galvanized Approvals RAL-GZ 655-D Systems 459

Channel Systems Ordering designation Thread - M Approvals Tightening torque Weight Sales pack Item number MM-S M6 M6 RAL-GZ 655-D 5 Nm 25 g 25 pc 418759 MM-S M8 M8 RAL-GZ 655-D 12 Nm 25 g 25 pc

15 Channel Systems Ordering designation Thread - M Approvals Tightening torque Weight Sales pack Item number MM-S M6 M6 RAL-GZ 655-D 5 Nm 25 g 25 pc MM-S M8 M8 RAL-GZ 655-D 12 Nm 25 g 25 pc MM-S M10 M10 RAL-GZ 655-D 16 Nm 25 g 25 pc Wing nut MM-WN Fitting connectors to installation channels Connector for MM system installation channels Easy to handle Wing nut is flush mounted Handy, one-piece part Nut: DC04 - DIN EN 10130, Wing: PA Galvanized Ordering designation Thread - M Tightening torque Weight Sales pack Item number MM-WN M6 M6 5 Nm 12 g 50 pc MM-WN M8 M8 5 Nm 12 g 50 pc MM-WN M10 M10 5 Nm 12 g 50 pc

Channel Systems Angle MM-A-90 Assembly of frames and supporting structures Joining channels at right angles Recommended for U-frame structures Pre-assembled for rapid installation Can be fitted to

16 Channel Systems Angle MM-A-90 Assembly of frames and supporting structures Joining channels at right angles Recommended for U-frame structures Pre-assembled for rapid installation Can be fitted to channels in various positions DC04 - DIN EN Galvanized Approvals RAL-GZ 655-D Ordering designation Thread - M Wrench size Approvals Tightening torque Weight Sales pack Item number MM-A-90 M8 13 mm RAL-GZ 655-D 12 Nm 75 g 20 pc Systems 461

Channel Systems Angle MM-AH-90 Assembly of frames and supporting structures Joining channels at right angles Pre-assembled for rapid installation Can be fitted to channels in various positions DC04 -

17 Channel Systems Angle MM-AH-90 Assembly of frames and supporting structures Joining channels at right angles Pre-assembled for rapid installation Can be fitted to channels in various positions DC04 - DIN EN Galvanized Approvals RAL-GZ 655-D Ordering designation Thread - M Wrench size Approvals Tightening torque Weight Sales pack Item number MM-AH-90 M8 13 mm RAL-GZ 655-D 12 Nm 52 g 20 pc

Channel Systems Rail support MM-R-16-36 Fastening channels to any supporting material Pre-assembled for rapid installation Reliable and easy to use Very easy alignment of the

number MM-R-16-36 M8 13 mm 12 Nm 390 g 10 pc 418762 Beam clamp MM-T-16-36 Fastening MM channel profiles to steel beams The beam clamp set fits all common T-beams (max.

18 Channel Systems Rail support MM-R Fastening channels to any supporting material Pre-assembled for rapid installation Reliable and easy to use Very easy alignment of the pre-assembled system Material: DC04 - DIN EN 10130, Plate: DD11 - DIN EN Galvanized Ordering designation Thread - M Wrench size Tightening torque Weight Sales pack Item number MM-R M8 13 mm 12 Nm 390 g 10 pc Beam clamp MM-T Fastening MM channel profiles to steel beams The beam clamp set fits all common T-beams (max. clamping thickness 23mm) EN-GJMB DIN EN 1562 Galvanized Extremely quick installation of MM channel system on steel beams without drilling or welding Easy alignment in the right position Systems 463

Channel Systems Ordering designation Thread - M Wrench size Sales pack Item number MM-T-16-36 M8 13 mm 20 pc 418763 Channel washer MM-CW Used to support suspended MM channel systems Used together

19 Channel Systems Ordering designation Thread - M Wrench size Sales pack Item number MM-T M8 13 mm 20 pc Channel washer MM-CW Used to support suspended MM channel systems Used together with MM channels, wing nuts and brackets Perfectly matched to the MM installation channel system No lateral slippage possible thanks to an exact fit DD11 - DIN EN Galvanized Ordering designation Hole diameter - D Weight Sales pack Item number MM-CW M8 8.6 mm 15 g 20 pc MM-CW M mm 15 g 20 pc Channel end cap MM-E Edge protector for MM installation channel system Suitable for all MM installation channels Polypropylene (PP) Ordering designation Weight Sales pack Item number MM-E-16 2 g 50 pc MM-E-30 3 g 50 pc

Channel Systems Ordering designation Weight Sales pack Item number MM-E-36 5 g 50 pc 418775 MM-E-45 6 g 25 pc 2048095 Rubber inlay MM-RI Acoustic insulation of MM channel air duct supports Insulating

20 Channel Systems Ordering designation Weight Sales pack Item number MM-E-36 5 g 50 pc MM-E-45 6 g 25 pc Rubber inlay MM-RI Acoustic insulation of MM channel air duct supports Insulating layer between M8 and M10 threaded rods and the ventilation duct Suitable for all MM installation channel systems and M8/M10 threaded rods Prevents direct contact between the air duct and the channel Large contact area between the channel insulation profile and the air duct avoids transmission of vibration and structure-borne sound EPDM Ageing resistance Tested as per DIN and Temperature resistance C Resistance Hardness insulation material Noise reduction UV light, diluted acids and alkalis, alcohol solutions, water and waterbased solutions 55 ±5 Shore A 13 db (A) Ordering designation Length - L Weight Sales pack Item number MM-RI 10cm 0.1 m 33 g 100 pc MM-RI 20m 20 m 6660 g 1 pc Systems 465

21 Channel Systems channel MQ-21 Cable trays Pipework Air ducts S250GD - DIN EN Sendzimir galvanized C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21 3m 21 mm 3 m 2 mm 1438 g RAL-GZ 655-C 3 m MQ-21 6m 21 mm 6 m 2 mm 1438 g RAL-GZ 655-C 6 m MQ-21 6m 21 mm 6 m 2 mm 1438 g RAL-GZ 655-C 6 m channel MQ-31 Cable trays Pipework Air ducts S250GD - DIN EN Sendzimir galvanized C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-31 3m 31 mm 3 m 2 mm 1759 g RAL-GZ 655-C 3 m MQ-31 6m 31 mm 6 m 2 mm 1759 g RAL-GZ 655-C 6 m channel MQ-41 Cable trays Pipework Air ducts S250GD - DIN EN Sendzimir galvanized C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41 3m 41 mm 3 m 2 mm 2080 g RAL-GZ 655-C 3 m MQ-41 6m 41 mm 6 m 2 mm 2080 g RAL-GZ 655-C 6 m MQ-41 6m 41 mm 6 m 2 mm 2080 g RAL-GZ 655-C 6 m

22 Channel Systems channel MQ-41/3 Cable trays Pipework Air ducts S250GD - DIN EN Sendzimir galvanized Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41/3 3m 41 mm 3 m 3 mm 2910 g Fire resistance test IBMB 3646/261/07, RAL- GZ 655-C 3 m MQ-41/3 6m 41 mm 6 m 3 mm 2910 g Fire resistance test IBMB 3646/261/07, RAL- GZ 655-C 6 m channel MQ-52 Cable trays Pipework Air ducts S250GD - DIN EN Sendzimir galvanized C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-52 6m 52 mm 6 m 2.5 mm 2942 g RAL-GZ 655-C 6 m MQ-52 6m 52 mm 6 m 2.5 mm 2942 g RAL-GZ 655-C 6 m channel MQ-72 Cable trays Pipework Air ducts S250GD - DIN EN Sendzimir galvanized C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-72 6m 72 mm 6 m 2.75 mm 4101 g RAL-GZ 655-C 6 m Systems 467

23 Channel Systems channel MQ-21 D Cable trays Pipework Air ducts S250GD - DIN EN Sendzimir galvanized Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Versatile, flexible and secure fastening with lateral and vertical adjustment Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21 D 6m 41 mm 6 m 2 mm 2904 g RAL-GZ 655-C 6 m Double installation channel MQ-41 D Cable trays Pipework Air ducts S250GD - DIN EN Sendzimir galvanized Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Versatile, flexible and secure fastening with lateral and vertical adjustment Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41 D 6m 83 mm 6 m 2 mm 4188 g RAL-GZ 655-C 6 m Double installation channel MQ D Cable trays Pipework Air ducts S250GD - DIN EN Sendzimir galvanized Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Secure, versatile fastening method with lateral and vertical adjustment Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ D 6m 124 mm 6 m 2.5 mm, 2.75 mm 7078 g RAL-GZ 655-C 6 m

24 Channel Systems Double installation channel MQ-124X D Cable trays Pipework Air ducts S250GD - DIN EN Sendzimir galvanized Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Secure, versatile fastening method with lateral and vertical adjustment Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-124X D 6m 124 mm 6 m 3 mm 9841 g RAL-GZ 655-C 6 m Bracket MQK-21 Stand-alone use on ceilings, walls and floors or combined with channel systems Recommended for installation in dry interiors For the installation of cable trays, air ducts and pipe supports S235JR - DIN EN Electrogalvanized - for dry indoor use only Serrated C-section Easy assembly and higher shear loads Pre-marked dimensions make installation, assembly and measurement easy Ordering designation Profile Length - L Material thickness Weight Sales pack Item number MQK-21/300 MQ mm Channel: 2 mm, Baseplate: 6 mm 750 g 10 pc MQK-21/450 MQ mm Channel: 2 mm, Baseplate: 6 mm 970 g 10 pc Bracket MQK-41 Stand-alone use on ceilings, walls and floors or combined with channel systems Recommended for installation in dry interiors For the installation of cable trays, air ducts and pipe supports S235JR - DIN EN Electrogalvanized - for dry indoor use only Serrated C-section Easy assembly and higher shear loads Pre-marked dimensions make installation, assembly and measurement easy Ordering designation Profile Length - L Material thickness Weight Approvals Sales pack Item number MQK-41/300 MQ mm Channel: 2 mm, Baseplate: 8 mm 1030 g Fire resistance test IBMB 3646/261/07 MQK-41/450 MQ mm Channel: 2 mm, Baseplate: 8 mm 1340 g Fire resistance test IBMB 3646/261/07 MQK-41/600 MQ mm Channel: 2 mm, Baseplate: 8 mm 1700 g Fire resistance test IBMB 3646/261/07 10 pc pc pc Systems 469

25 Channel Systems Bracket MQK-72 Stand-alone use on ceilings, walls and floors or combined with channel systems Recommended for installation in dry interiors For the installation of cable trays, air ducts and pipe supports S235JR - DIN EN Electrogalvanized - for dry indoor use only Serrated C-section Easy assembly and higher shear loads Pre-marked dimensions make installation, assembly and measurement easy Ordering designation Profile Length - L Material thickness Weight Approvals Sales pack MQK-72/450 MQ mm Channel: 2.75 mm, Baseplate: 10 mm 2670 g Fire resistance test IBMB 3646/261/07 Item number 6 pc MQK-72/600 MQ mm Channel: 2.75 mm, Baseplate: 10 mm 3170 g Fire resistance test IBMB 3646/261/07 6 pc Angle brace MQK-S Recommended for fabricating wall brackets with individual stand-off lengths Increases the loadbearing capacity of brackets S235JR - DIN EN Electrogalvanized - for dry indoor use only Easily customized stand-alone structures Channel assembly in two positions is possible Two different lengths available Ordering designation Height - H Length - L a Material thickness Weight Sales pack Item number MQK-SK short 328 mm 324 mm 355 mm 3 mm 650 g 10 pc MQK-SL long 528 mm 524 mm 635 mm 3 mm 1060 g 10 pc Channel connector MQN Recommended for connecting angles to channels One-piece component for connecting channels and structural elements Universal: one and the same nut for all channels Fewer parts and high flexibility Universal: one pushbutton for all connectors and MQ installation channels Bolt: grade DIN EN ISO 898, Nut: QStE 380 TM, SEW 92, Plate: DD11 - DIN EN Electrogalvanized - for dry indoor use only 470

26 Channel Systems Ordering designation Thread - M Wrench size Tightening torque Weight Sales pack Item number MQN M10 17 mm 40 Nm 66 g 50 pc Wing nut MQM Simple part for connecting channels with structural elements Easy disassembly In-plane connection to channel possible Compact dimensions Wings: plastic PA, Nut: S355MC - DIN EN Electrogalvanized - for dry indoor use only Ordering designation Thread - M Tightening torque Weight Sales pack Item number MQM-M6 M6 10 Nm 23 g 50 pc MQM-M8 M8 20 Nm 23 g 50 pc Solid wing nut MQM Simple part for connecting channels to parts of structures Element for direct connection to channels Nut with flexible wing In-plane connection to channel possible Wings: plastic PA, Nut: C4C - DIN EN Electrogalvanized - for dry indoor use only Ordering designation Thread - M Tightening torque Weight Sales pack Item number MQM-M12 M12 40 Nm 33 g 50 pc Systems 471

27 Channel Systems Pipe ring saddle MQA Various suspensions with threaded rods Pipe ring saddle for pipe installation One-piece design Only one type of saddle nut for all MQ channels Versatile, one-piece design Nut: QStE 380 TM, SEW 92, Plate: DD11 - DIN EN 10111, Plastic: PA 6.6 Electrogalvanized - for dry indoor use only Ordering designation Thread - M Tightening torque Weight Sales pack Item number MQA-M6 M6 4 Nm 57 g 50 pc MQA-M8 M8 9 Nm 56 g 50 pc MQA-M10 M10 18 Nm 56 g 50 pc Pipe ring saddle MQA-B Various suspensions with threaded rods Pipe ring saddle for pipe installations with fire safety requirements Single-part design One and the same saddle nut for all MQ channels Easy alignment in the right position Nut: GTW45, DIN 1692, Plate: S 235 JRG2 - DIN EN 10025, Plastic: PBT Electrogalvanized - for dry indoor use only Approvals Fire resistance test IBMB 3646/261/07 Ordering designation Thread - M Approvals Tightening torque Weight Sales pack Item number MQA-M10-B M10 Fire resistance test IBMB 3646/261/07 18 Nm 87 g 50 pc MQA-M12-B M12 Fire resistance test IBMB 3646/261/07 31 Nm 83 g 50 pc MQA-M16-B M16 Fire resistance test IBMB 3646/261/07 40 Nm 84 g 50 pc Preassembled angle MQW-Q2 Assembly of frames and structures Connection of channels Pre-assembled for rapid installation High strength Material thickness Angle: DD11 - DIN EN 10111, Bolt: M10 grade DIN ISO 898 Electrogalvanized - for dry indoor use only 3 mm 472

28 Channel Systems Ordering designation Angle Wrench size Tightening torque Weight Sales pack Item number MQW-Q mm 40 Nm 200 g 20 pc Angle MQW 90 Assembly of frames and structures Quick installation Easy to handle S235JR - DIN EN Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Angle Weight Sales pack Item number MQW g 20 pc MQW g 10 pc MQW-8/ g 10 pc Angle MQW 45 /135 Assembly of frames and structures Connection of channels Quick installation Reliable keying action Three dimensional, thus high strength Material thickness DD11 MOD - HN 547, S235JR - DIN EN Electrogalvanized - for dry indoor use only 4 mm Ordering designation Angle Weight Sales pack Item number MQW-3/ g 20 pc MQW-8/ g 10 pc Systems 473

29 Channel Systems Angle bracket MQW-S Assembly of frames and structures Attachment to walls, ceilings, floors Connection of channels Quick installation Universal: few parts for all applications Easy to handle S235JR - DIN EN Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Angle Weight Sales pack Item number MQW-S/ g 10 pc MQW-S/ g 10 pc Connector 2-D MQV-2D Suitable for complex channel structures For clever single-plane channel design Universal: few parts for various applications Easy to use Two or three-dimensional, thus high strength S235JR - DIN EN Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQV-2/2 D 438 g 10 pc MQV-3/2 D 615 g 10 pc Connector 3-D MQV-3D For clever 3D channel design Universal: few parts for various applications Easy to use Three dimensional S235JR - DIN EN Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQV-3/3 D 451 g 10 pc

30 Channel Systems Ordering designation Weight Sales pack Item number MQV-4/3 D 770 g 10 pc Channel tie - flat MQV Suitable for complex channel structures For clever single-plane channel design Universal: few parts for various applications Easy to use S235JR - DIN EN Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQV-P4 188 g 10 pc MQV-T 196 g 10 pc MQV-P5 240 g 10 pc Channel tie MQV For connecting two MQ channels together Joints between MQ-41, MQ-41/3 and MQ-72 channels have the full section modulus Joints between MQ-41 D, and MQ-52/72 channels using 2 connectors have the full section modulus For threaded rods /screws in elongated holes S235JR - DIN EN Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQV g 4 pc MQV g 4 pc Channel tie MQV-12 For connecting two MQ channels together Simple extension of channel length Joints between MQ-41 D, and MQ-52/72 channels using 2 connectors have the full section modulus High 3-dimensional rigidity S235JRG2 - DIN EN Material thickness Electrogalvanized - for dry indoor use only 4 mm Systems 475

31 Channel Systems Ordering designation Weight Sales pack Item number MQV g 10 pc Rail support MQV-2/2 D Connection of channels to any supporting material High application flexibility Reliable and easy to use S235JR - DIN EN Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQV-2/2 D g 10 pc Rail support MQP-1 Connection of channels to any supporting material High application flexibility Reliable and easy to use Material thickness DD11 MOD - HN 547, S235JR - DIN EN Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQP-1/1 110 g 20 pc MQP-1/3 190 g 20 pc Rail support MQP-45 Connection of channels to any supporting material High application flexibility Reliable and easy to use Secure, easy attachment at angles below 45 Material thickness DD11 MOD - HN 547, S235JR - DIN EN Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQP g 10 pc

32 Channel Systems Rail support MQP Connection of channels to any supporting material High application flexibility Reliable and easy to use DD11 MOD - HN 547, S235JR - DIN EN Electrogalvanized - for dry indoor use only Ordering designation Weight Approvals Sales pack Item number MQP g Fire resistance test IBMB 3646/261/07 12 pc MQP g 8 pc MQP g 6 pc Pivot base MQP Connection of channels to any supporting material High application flexibility Reliable and easy to use S235JR - DIN EN Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQP-G 1055 g 10 pc MQP-FG 2070 g 1 pc Universal joint MQP-U For universal use on inclined supporting components High application flexibility Can be set at any angle up to 90 Easy handling and height adjustment of the threaded rod S235JR - DIN EN Material thickness Additional product information Electrogalvanized - for dry indoor use only 5 mm To be used with threaded rod of at least 4.8 grade (DIN 976), 8.8 grade bolts (DIN 933), 8 grade nuts (DIN 934) and washers (DIN 125) - these items are not included Ordering designation Hole diameter - D Weight Sales pack Item number MQP-U M mm 390 g 10 pc MQP-U M mm 390 g 10 pc Systems 477

33 Channel Systems Beam clamp MQT For fastening MQ channels to steel beams without drilling or welding (use only in pairs!) No drilling or welding neccessary The attachment fits all standard beams (max. clamping thickness = 23 mm) Quick installation Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025, Nut - DIN Electrogalvanized - for dry indoor use only Additional product information Beam clamps always to be used in pairs Ordering designation Thread - M Wrench size Tightening torque Weight Sales pack Item number MQT M8 13 mm 10 Nm 500 g 10 pc MQT M10 17 mm 20 Nm 650 g 10 pc MQT M12 19 mm 30 Nm 860 g 10 pc Clamp (channel to channel) MQB Channel to channel/wall mounting S235JR - DIN EN Universal: few parts for all applications Easy to use Suitable for various MQ channel profiles Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQB g 10 pc MQB g 10 pc MQB g 10 pc MQB g 10 pc

34 Channel Systems Clamp (channel to concrete) MQB For cross connection of MQ channels Pushbutton connector takes up shear and tensile loads Universal: few parts for all applications Easy to use S235JR - DIN EN Material thickness Electrogalvanized - for dry indoor use only 4 mm Ordering designation Weight Sales pack Item number MQB-G g 10 pc Drilled plate MQZ-L For wall, ceiling or floor attachment of angles, connectors or brackets For fastening metric threaded parts to MQ channel S235JR - DIN EN Electrogalvanized - for dry indoor use only Matching items in program Matches the MQ channel system perfectly Suitable for MQ installation channels and brackets Ordering designation Hole diameter - D Weight Approvals Sales pack Item number MQZ-L9 9.5 mm 92 g 20 pc MQZ-L mm 88 g Fire resistance test IBMB 3646/261/07 20 pc MQZ-L mm 84 g Fire resistance test IBMB 3646/261/07 20 pc MQZ-L mm 80 g Fire resistance test IBMB 3646/261/07 20 pc washer MQZ-U For use at butterfly holes, M10 anchor, M10 bolt Matching items in program All connectors can be installed with standard M10 bolts S235JR - DIN EN Electrogalvanized - for dry indoor use only Ordering designation Weight Sales pack Item number MQZ-U 30 g 40 pc Channel tie, shear brace MQZ For connecting installation channels back to back Easy fabrication of double channels using channel ties and magnetic wrench Easy to fit in the elongated holes in the channel S235JR - DIN EN Electrogalvanized - for dry indoor use only Systems 479

35 Channel Systems Ordering designation Thread - M Wrench size Material thickness Tightening torque Weight Sales pack Item number MQZ-SV M8 13 mm 4 mm 6 Nm 26 g 40 pc MQZ-SS M10 13 mm 3.5 mm 20 Nm 62 g 40 pc Channel end cap MQZ-E Provides protection when handling sharp cut edges Clean-cut appearance Additional protection when handling installation channels with sharp, cut edges Polypropylene (PP) Ordering designation Weight Sales pack Item number MQZ-E21 3 g 50 pc MQZ-E31 4 g 50 pc MQZ-E41 5 g 50 pc D-system MQ3D Assembly of 3-D structures on site Bracing and stiffening of complex fastening solutions Universal: few parts for all applications Quick and easy to use 45 angle and bracing with predetermined bending point Material thickness MQ3D-B, MQ3D-W45: QStE 380 TM - SEW 092; MQ3D-W90, MQ3D-A: DD11 - DIN EN 10111; Bolt: steel grade 8.8 Electrogalvanized - for dry indoor use only 3 mm Ordering designation Angle Thread - M Wrench size Tightening torque Weight Sales pack Item number MQ3D-A 45 M10 17 mm 40 Nm 95 g 20 pc

36 Channel Systems Overview System MC Galvanized Channels Brackets Longitudinal conn. End cap MC-3D-41 3m MC-3D-41 6m MC-72 6m MC-B-3D-41/ MC-BE MC-CL MC-B-3D-41/ MC-BE MC-B-3D-41/ MQZ-E MQZ-E Base Connector Channel Connectors Angles MC-CB MC-CH MC-CU MC-A MC-AH MC-AF Channel nuts Channel screws Channel stiffener Channel plate MC-WN-M MC-WN-3D MC-SI-M MC-S-M MC-PI MC-PU Accessories Systems M10x M10x M10-SL A10,5/

37 Channel Systems channel MC-3D-41 Cable tray supports indoors Integrated floor supports Instrumentation supports indoors Connectivity from all channel sides High flexibility in terms of fastening type and direction Dimension marks for easy cutting and installation Structural steel with a minimum yield strength of 280 N/mm2 Sendzimir galvanized Ordering designation Height Length Material thickness Weight per metre length Sales pack Item number MC-3D-41 3m 41 mm 3 m 1.6 mm 1713 g 3 m MC-3D-41 6m 41 mm 6 m 1.6 mm 1713 g 6 m channel MC-72 Cable tray supports indoors Integrated floor supports Instrumentation supports indoors Serrated C-section profile High load capacity Dimension marks for easy cutting and installation Structural steel with a minimum yield strength of 250 N/mm2 Galvanized Ordering designation Height Length Material thickness Weight per metre length Sales pack Item number MC-72 6m 72 mm 6 m 2.75 mm 4108 g 6 m

38 Channel Systems Bracket MC-B-3D-41 Cable tray supports indoors Instrumentation supports indoors Integrated floor supports Connectivity from all channel sides High flexibility Serrated C-section profile Structural steel with a minimum yield strength of 275 N/mm2 for the channel, 355 N/mm2 for the plate Electrogalvanized Ordering designation Profile Length - L Material thickness Weight Sales pack Item number MC-B-3D-41/450 MC-3D mm 1.6 mm 1242 g 12 pc MC-B-3D-41/650 MC-3D mm 1.6 mm 1508 g 12 pc MC-B-3D-41/1000 MC-3D mm 1.6 mm 2150 g 12 pc Electrical bracket MC-BE Cable tray supports indoors Easy to install Various fastening options High load performance Structural steel with a minimum yield strength of 250 N/mm2 Sendzimir galvanized Ordering designation Height - H Length - L a Material thickness Weight Sales pack Item number MC-BE mm 322 mm 50 mm 1.5 mm 557 g 12 pc MC-BE mm 632 mm 100 mm 1.5 mm 1138 g 12 pc Systems 483

Channel Systems Longitudinal channel connector MC-CL [ Longitudinal connector for MC channels % [ Easy to use on the open side or back of the channel Compatible with all MC channels High load

39 Channel Systems Longitudinal channel connector MC-CL [ Longitudinal connector for MC channels % [ Easy to use on the open side or back of the channel Compatible with all MC channels High load capacity $ [ Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized Material thickness 4 mm & [ [ [ [ Ordering designation Weight MC-CL 708 g Sales pack Item number pc Base connector MC-CB [ [ Connection of MC channels to concrete Fastening to floors, ceilings or walls % Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized & [ [ [ [ [ [ 484 Various, easy installation options Height adjustment High load capacity $ [

Channel Systems Ordering designation Weight Sales pack Item number MC-CB 925 g 12 pc 2061832 Angle MC-A-90 Connection of MC channels at 90 degrees Assembly of two and three-dimensional modular system

40 Channel Systems Ordering designation Weight Sales pack Item number MC-CB 925 g 12 pc Angle MC-A-90 Connection of MC channels at 90 degrees Assembly of two and three-dimensional modular system structures Various, easy installation options Can be fitted regardless of the direction in which the open side of the channel is facing High load capacity Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized 4 mm Ordering designation Angle Weight Sales pack Item number MC-A g 1 pc Height-adjustable angle MC-AH-90 Connection of MC channels at 90 degrees Assembly of two and three-dimensional modular system structures Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized High application flexibility Easy height adjustment along full channel length and on all channel sides High shear load capacity Material thickness 4 mm Systems 485

41 Channel Systems Ordering designation Angle Weight Sales pack Item number MC-AH g 20 pc Flat angle MC-AF-90 Connection of MC channels at 90 degrees Various, easy installation options High application flexibility Strong and cost-efficient connection Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized 4 mm Ordering designation Weight Sales pack Item number MC-AF g 20 pc

42 Channel Systems Height-adjustable connector MC-CH Cross-connector for MC channels Three-dimensional structures such as integrated floor supports Easy to install Height adjustment High load capacity Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized 4 mm Ordering designation Weight Sales pack Item number MC-CH 710 g 20 pc Universal connector MC-CU Connection of MC-3D channel to Hilti MC and MI installation channels Connection of MC-3D channel to concrete Bracing for modular system structures Various, easy installation options High flexibility in terms of fastening type and direction Multiple function as channel and base connector Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized 4 mm Systems 487

43 Channel Systems Ordering designation Weight Sales pack Item number MC-CU 338 g 12 pc Wing nut MC-WN-M10 Fastening bolts and threaded rods at the open side of MC channel Fastening connectors at the open side of MC channel, anywhere along its length QStE 380 TM - SEW 092 Electrogalvanized Easy-to-use single part For universal use with all channel sizes Reusable Ordering designation Thread - M Tightening torque Weight Sales pack Item number MC-WN-M10 M10 40 Nm 22 g 50 pc Wing nut MC-WN-3D Fastening bolts and threaded rods at any side of MC-3D channel Fastening connectors at any side of MC-3D channel Assembly of two and three-dimensional modular system structures QStE 380 TM - SEW 092 Electrogalvanized High application flexibility Easy-to-use single part Allows connection from all sides of MC-3D channel 488

44 Channel Systems Ordering designation Thread - M Tightening torque Weight Sales pack Item number MC-WN-3D M10 40 Nm 41 g 20 pc Universal plate MC-PU Load distribution plate for use where bolts and threaded rods are fitted through MC channel Various, easy installation options Can be fitted on all sides of MC-3D channel Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized Ordering designation Material thickness Hole diameter - D Weight Sales pack Item number MC-PU 4 mm 13.5 mm 53 g 100 pc Channel insert screw MC-SI-M10 Assembly of two and three-dimensional modular system structures Fitting connectors to the back or side of MC-3D channel Steel grade 8.8 Electrogalvanized Strong and cost-efficient connection High application flexibility Can be fitted at the back or side of MC-3D channel Ordering designation Thread - M Weight Sales pack Item number MC-SI-M10 M10 17 g 100 pc Systems 489

45 Channel Systems Channel connection screw MC-S-M10 Assembly of two and three-dimensional modular system structures Fitting connectors to the back of MC channels Steel grade 8.8 Electrogalvanized Strong and cost-efficient connection High application flexibility Fits at the back of MC channels Ordering designation Thread - M Weight Sales pack Item number MC-S-M10 M10 47 g 100 pc Channel stiffener insert MC-PI Channel stiffening insert for use where bolts and threaded rods are fitted through MC channels Easy-to-use single part Surface level with channel after installation Structural steel with a minimum yield strength of 235 N/mm2 Electrogalvanized Ordering designation Weight Sales pack Item number MC-PI 20 g 50 pc

46 Base Connectors Beam clamp MAB For fastening to steel beams without drilling or welding on steel beams without drilling or welding Through-hole without thread Infinite height adjustment possible after loosening the lock nut, also subsequently EN-GJMB Galvanized Ordering designation Thread - M Hole diameter - D X Y Maximum tensile load - F Approvals Weight Sales pack Item number MAB-9 M8 9 mm 20.9 mm 18 mm 1.2 kn 81 g 12 pc MAB-11 M10 11 mm 23.4 mm 19.5 mm 2.5 kn FM approved, UL approved 143 g 12 pc EX15279 MAB-13 M10 13 mm 35 mm 26 mm 3.5 kn FM approved, UL approved 216 g 12 pc EX15279 MAB-17 M12 17 mm 30 mm 28.5 mm 5.5 kn FM approved, UL approved EX g 12 pc Systems 491

47 Accessories Threaded rod AM Steel grade DIN Galvanized Ordering designation Thread - M Length - L Sales pack Item number AM6x zinced M mm 20 pc AM6x zinced M mm 20 pc AM8x zinced M mm 20 pc AM8x zinced M mm 20 pc AM8x zinced M mm 20 pc AM10x zinced M mm 20 pc AM10x zinced M mm 20 pc AM10x zinced M mm 20 pc AM12x zinced M mm 15 pc AM12x zinced M mm 15 pc AM16x zinced M mm 5 pc AM16x zinced M mm 5 pc AM16x zinced M mm 5 pc AM20x zinced M mm 5 pc AM20x zinced M mm 5 pc AM24x zinced M mm 5 pc Flat washer DIN 125 Steel 200 HV-A2K - DIN EN ISO 7089 Galvanized Ordering designation Inside diameter - DI Outside diameter - DA Cross section thickness - s Sales pack Item number A 6,4/12 zinced 6.4 mm 12 mm 1.6 mm 500 pc A 8,4/16 zinced 8.4 mm 16 mm 1.6 mm 200 pc A 10,5/20 zinced 10.5 mm 20 mm 2 mm 100 pc A 13/24 zinced 13 mm 24 mm 2.5 mm 100 pc A 17/30 zinced 17 mm 30 mm 3 mm 100 pc A 21/37 zinced 21 mm 37 mm 3 mm 50 pc A 25/44 zinced 25 mm 44 mm 3 mm 50 pc Flat washer similar to DIN 125 Steel Galvanized 492

48 Accessories Ordering designation Inside diameter - DI Outside diameter - DA Cross section thickness - s Sales pack Item number A 6,4/28 zinced 6.4 mm 28 mm 2 mm 200 pc A 8,4/28 zinced 8.4 mm 28 mm 2 mm 200 pc A 8,4/40 zinced 8.4 mm 40 mm 3 mm 100 pc A10,5/28 zinced 10.5 mm 28 mm 2 mm 100 pc A 10,5/28 zinced 10.5 mm 28 mm 2 mm 100 pc A 10,5/40 zinced 10.5 mm 40 mm 3 mm 100 pc A 13/40 zinced 13 mm 40 mm 3 mm 100 pc A 17/40 zinced 17 mm 40 mm 3 mm 100 pc Hexagon nut Steel grade 8 Galvanized Ordering designation Thread - M Height - H Wrench size - W Sales pack Item number M6 zinced M6 5 mm 10 mm 100 pc M8 zinced M8 7 mm 13 mm 100 pc M10 zinced M10 8 mm 17 mm 100 pc M12 zinced M12 10 mm 19 mm 100 pc M16 zinced M16 13 mm 24 mm 50 pc M20 zinced M20 16 mm 30 mm 50 pc M24 zinced M24 19 mm 36 mm 50 pc Prevailing torque hexagon nut M10-SL Steel grade 8 Electrogalvanized Ordering designation Tightening torque Weight Sales pack Item number M10-SL zinced 40 Nm 15 g 100 pc Hexagon bolt Steel grade 8.8 Galvanized Ordering designation Thread - M Thread length - L Height - H Wrench size - W Sales pack Item number M6x16 zinced M6 16 mm 4 mm 10 mm 100 pc M6x25 zinced M6 25 mm 4 mm 10 mm 100 pc M6x40 zinced M6 40 mm 4 mm 10 mm 100 pc M8x16 zinced M8 16 mm 5 mm 13 mm 100 pc M8x20 zinced M8 20 mm 5 mm 13 mm 100 pc M8x25 zinced M8 25 mm 5 mm 13 mm 100 pc Systems 493

49 Accessories Ordering designation Thread - M Thread length - L Height - H Wrench size - W Sales pack Item number M8x30 zinced M8 30 mm 5 mm 13 mm 100 pc M8x55 zinced M8 55 mm 5 mm 13 mm 100 pc M10x16 zinced M10 16 mm 6 mm 17 mm 100 pc M10x20 zinced M10 20 mm 6 mm 17 mm 100 pc M10x20 zinced M10 20 mm 6 mm 17 mm 100 pc M10x25 zinced M10 25 mm 6 mm 17 mm 100 pc M10x30 zinced M10 30 mm 6 mm 17 mm 100 pc M10x35 zinced M10 35 mm 6 mm 17 mm 100 pc M10x55 zinced M10 55 mm 6 mm 17 mm 100 pc M12x22 zinced M12 22 mm 8 mm 19 mm 50 pc M12x25 zinced M12 25 mm 8 mm 19 mm 50 pc M12x35 zinced M12 35 mm 8 mm 19 mm 50 pc M16x40 zinced M16 40 mm 10 mm 24 mm 50 pc Hexagon screw DIN 931 Steel grade 8.8 Electrogalvanized Ordering designation Thread - M Thread length - L a Height - H Wrench size - W Weight Sales pack Item number M10x65 zinced M10 27 mm 65 mm 6 mm 17 mm 45 g 100 pc Spacer coupling, round Steel Galvanized Ordering designation Thread - M Length - L Diameter - D Sales pack Item number M6x30 round M6 30 mm 10 mm 100 pc M8x30 round M8 30 mm 11 mm 50 pc M8x40 round M8 40 mm 11 mm 50 pc M10x30 round M10 30 mm 13 mm 50 pc M10x40 round M10 40 mm 13 mm 50 pc M12x30 round M12 30 mm 16 mm 50 pc M12x40 round M12 40 mm 16 mm 50 pc M16x60 round M16 60 mm 20 mm 20 pc

50 Accessories Spacer coupling Steel grade 4.6 Galvanized Ordering designation Thread - M Length - L Wrench size - W Sales pack Item number M6x18 M6 18 mm 10 mm 50 pc M8x25 M8 25 mm 13 mm 50 pc M8x40 M8 40 mm 13 mm 50 pc M10x30 M10 30 mm 17 mm 50 pc M12x40 M12 40 mm 19 mm 50 pc M16x40 M16 40 mm 24 mm 25 pc Threaded rod cutter NK-M/MRC Cutting threaded rods Cuts M6/M8/M10 threaded rods easily without burring or producing swarf Supplied complete with two pre-assembled dies (M8/M10) Saves time on site by offering two cutting possibilities Steel Painted Ordering designation Thread - M Sales pack Item number MRC - M8/10 1 pc MRC - M6 M6 1 pc MRC - M8 M8 1 pc MRC - M10 M10 1 pc Systems 495

51 Pipe Rings Overview Pipe Rings Pipe Ring Picture Techincal Data Features Approvals Fresh water distribution pipes Heating Pipes Gas distribution pipes Waste water distribution pipes Chilled water pipes Sprinkler pipes Light industrial applications Corrosive Surroundings Recommended static load for suspended installation - Frec Average noise reduction - (ΔL) Temperature resistance Clamping range Connection boss Special features Light and medium-duty galvanized pipe rings MP-PI N 16 db(a) -40 to +110 ºC mm M8, M8/ M10, M12 Securely fixed rubber inlay High quality, with third party approvals MP-HI M8/M N 17 db(a) -40 to +110 ºC mm M8/M10 Securely fixed rubber inlay Safe closure with click feedback Double connection boss 1) MP-H M8/M N mm M8/M10 Safe closure with click feedback Double connection boss MPN-RC N 15 db(a) -40 to +110 ºC mm M8/M10 M16 Three-stage quick closure Innovative low-friction strip for easy pipe positioning MPN-GK 750 N 17 db(a) -50 to +110 ºC mm M8 and M8/ M10 Three-stage quick closure Special partial flock coating for low friction Heavy-duty galvanized pipe rings 1) Only clamping range 8 mm to 110 mm MP-MI N 19 db(a) -40 to +110 ºC mm M10/M12, M16, 1/2, 3/4 Solidly made, strong and rigid Welded clamping nuts Civil protection approval 2) MP-M N mm M16, 1/2, 3/4 Solidly made, strong and rigid Welded clamping nuts Civil protection approval MP-MXI N 16 db(a) -50 to +120 ºC mm M10/ M12, M16, 3/4, 1 Highest loads upto 17 kn Dynamic load tested Civil protection approval 3) MP-MX N mm M10/ M12, M16, 3/4, 1 Highest loads upto 17 kn Dynamic load tested 4) 3) Chilled water and sprinkler systems galvanized pipe rings 2) Only clamping range 15 mm to 200 mm 3) Only boss sizes M16, 3/4, 1 4) Only M10/12 and M16 MIP-M/-H/-T N 16 db(a) -40 to +105 ºC mm M8/ M10, M16 Completely isolated system Thermal conductivity -0,030 W/mK Integrated vapour barrier MI-CF N -80 to +140 ºC mm M8, M10, M10/M12, M16 Thermal conductivity -0,030 W/mK Integrated vapour barrier Version with load sheet available KF N -160 to +130 ºC mm M8/1/2, M10/1/2, 3/4, M16, M20, M24 Thermal conductivity -0,042 W/mK High load capacity Absolute accurate fit of support surfaces MP-SP N 3/4-8 or mm M8,M10, M12. M16 Rapid installation thanks to click closure system System approved by Vds, FM and UL LH N 1/2-8 or mm M10, M12 System approved by FM and UL MP-MS N mm M8,M10, M12. M16 Welded clamping nuts System approved by Vds, FM and UL SDC N 1/2-12 or mm M10, M12. M16, M20, M24 Easy height adjustment System approved by FM and UL Hot-dipped galvanized pipe rings MP-MI-F 1800 N 18 db(a) -50 to +120 ºC mm M10 Good resistance to corrosion (45 µm) MP-M-F 1800 N mm M10 Good resistance to corrosion (45 µm) MP-MXI-F N 16 db(a) -50 to +120 ºC mm M10/ M12, M16 Good resistance to corrosion (45 µm) High loads to 17 kn MP-MX-F N mm M16 Good resistance to corrosion (45 µm) High loads to 17 kn Stainless steel pipe rings MP-SRNI N 15 db(a) -50 to +120 ºC mm M8, M10 High quality / (A4) MP-SRN 2000 N mm M8, M10 High quality / (A4) MP-MRI N 18 db(a) -50 to +120 ºC mm M10, M12, M16 High quality / (A4) MP-MR N mm M10, M12, M16 High quality / (A4) MP-MRXI N 16 db(a) -50 to +120 ºC mm M16 High quality / (A4) 496

Pipe Rings Pipe ring MP-PI Fresh water distribution pipes Waste water distribution pipes Heating and gas distribution pipes Securely fixed rubber inlay no dropping out High-quality product with

insulation material Noise reduction Approvals Additional product information Insulation material 75 ±5 Shore A 16 db (A) Acustic insulaton DIN 4109 inspected, Fire Class E The maximum load of 5000 N

52 Pipe Rings Pipe ring MP-PI Fresh water distribution pipes Waste water distribution pipes Heating and gas distribution pipes Securely fixed rubber inlay no dropping out High-quality product with third-party approvals with two threaded rods possible for sizes 8 inch and above to achieve higher loads SPCC-SD FB - Q/BQB402, DC01 EN Galvanized Temperature resistance C Hardness insulation material Noise reduction Approvals Additional product information Insulation material 75 ±5 Shore A 16 db (A) Acustic insulaton DIN 4109 inspected, Fire Class E The maximum load of 5000 N in accordance with RAL-GZ 655-B can be achieved if pipe rings 8 inches in diameter and larger are fastened with two threaded rods EPDM Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Distance between holes - A Sales pack Item number Kit MP-PI /4 M8 (900) 1 pc Kit MP-PI M8/M10 (300) 1 pc Kit MP-PI M8/M10 (300) 1 pc Kit MP-PI /2 M8/M10 1 pc (300) Kit MP-PI M8/M10 1 pc (300) Kit MP-PI M8/M10 1 pc (300) Kit MP-PI /8 M8 (900) 1 pc Kit MP-PI /2 M8 (900) 1 pc Kit MP-PI /4 M8 (900) 1 pc Kit MP-PI M8 (900) 1 pc Kit MP-PI /4 M8 (600) 1 pc Kit MP-PI /2 M8 (600) 1 pc Kit MP-PI M8 (600) 1 pc Kit MP-PI M8 (600) 1 pc Kit MP-PI M8/M10 (300) 1 pc Kit MP-PI /2 M8/M10 1 pc (300) MP-PI /4 M mm 1/4 in 54 mm 20 x 1.2 mm 22 mm 750 N 39 mm 150 pc MP-PI /8 M mm 3/8 in 58 mm 20 x 1.2 mm 24 mm 750 N 42 mm 150 pc Systems 497

53 Pipe Rings Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Distance between holes - A Sales pack Item number MP-PI /2 M mm 1/2 in 62 mm 20 x 1.2 mm 26 mm 750 N 47 mm 150 pc MP-PI /4 M mm 3/4 in 68 mm 20 x 1.2 mm 30 mm 750 N 53 mm 150 pc MP-PI M mm 1 in 76 mm 20 x 1.2 mm 32 mm 750 N 61 mm 150 pc MP-PI /4 M mm 1-1/4 in 91 mm 20 x 1.2 mm 37 mm 750 N 74 mm 100 pc MP-PI /2 M mm 1-1/2 in 98 mm 20 x 1.2 mm 40 mm 750 N 81 mm 100 pc MP-PI M mm 105 mm 20 x 1.5 mm 44 mm 1250 N 87 mm 100 pc MP-PI M mm 2 in 111 mm 20 x 1.5 mm 48 mm 1250 N 94 mm 100 pc MP-PI M8/M mm 119 mm 20 x 1.5 mm 62 mm 1250 N 101 mm 50 pc MP-PI /2 M8/M mm 2-1/2 in 124 mm 20 x 1.5 mm 64 mm 1250 N 106 mm 50 pc MP-PI M8/M mm 134 mm 20 x 1.5 mm 68 mm 1250 N 116 mm 50 pc

Pipe Rings Residential pipe ring MP-LHI Light-duty pipe installation up to 2 Fastening drinking water pipes and heating pipes in residential and industrial construction Gas distribution pipes

for closer installation to walls or ceilings DC01 - DIN EN 10130 Galvanized Temperature resistance -40-110 C Hardness insulation material Noise reduction Approvals Insulation material 45 ±5 Shore A

54 Pipe Rings Residential pipe ring MP-LHI Light-duty pipe installation up to 2 Fastening drinking water pipes and heating pipes in residential and industrial construction Gas distribution pipes Quick-release closure with only one clamping screw - easy, quick closing and easy re-opening The adhesive-bonded acoustic insulation insert doesn t drop out during installation Short connection boss for closer installation to walls or ceilings DC01 - DIN EN Galvanized Temperature resistance C Hardness insulation material Noise reduction Approvals Insulation material 45 ±5 Shore A 17 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2, RAL-GZ 655-B EPDM rubber Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Max. extension from centre - b1 Distance centre pipe to top - h Maximum load - F Sales pack Item number MP-LHI /4 M mm 1/4 in 47 mm 20 x 0.8 mm 27 mm 22 mm 400 N 25 pc MP-LHI /2 M mm 1/2 in 56 mm 20 x 0.8 mm 30 mm 27 mm 400 N 25 pc MP-LHI /4 M mm 3/4 in 62 mm 20 x 0.8 mm 34 mm 30 mm 400 N 25 pc MP-LHI M mm 1 in 70 mm 20 x 0.8 mm 37 mm 34 mm 400 N 25 pc MP-LHI /4 M mm 1-1/4 in 77 mm 20 x 1.2 mm 41 mm 37 mm 750 N 25 pc MP-LHI /2 M mm 1-1/2 in 85 mm 20 x 1.2 mm 45 mm 42 mm 750 N 25 pc MP-LHI M mm 92 mm 20 x 1.2 mm 49 mm 45 mm 750 N 25 pc MP-LHI M mm 2 in 100 mm 20 x 1.2 mm 53 mm 49 mm 750 N 10 pc Systems 499

Pipe Rings Residential pipe ring MP-HI Light-duty pipe installation up to 6 diameter Fastening drinking water pipes and heating pipes in residential and industrial construction Gas distribution pipes

insulation material Noise reduction Approvals Insulation material 40 ±5 Shore A 17 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2, RAL-GZ 656 EPDM rubber Ordering designation Clamping

55 Pipe Rings Residential pipe ring MP-HI Light-duty pipe installation up to 6 diameter Fastening drinking water pipes and heating pipes in residential and industrial construction Gas distribution pipes Two-screw pipe ring with side swivelling mechanism Safe click closure for easy and fast pre-fixing Clamping range without gaps DC01 - DIN EN Galvanized Temperature resistance C Hardness insulation material Noise reduction Approvals Insulation material 40 ±5 Shore A 17 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2, RAL-GZ 656 EPDM rubber Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Noise reduction Sales pack Item number MP-HI 8-12 M8/M10 assy 8-12 mm 52 mm 20 x 1 mm 30 mm 600 N 17 db (A) 25 pc MP-HI M8/M10 assy mm 1/4 in 52 mm 20 x 1 mm 30 mm 600 N 17 db (A) 25 pc MP-HI M8/M10 assy mm 3/8 in 57 mm 20 x 1 mm 32 mm 600 N 17 db (A) 25 pc MP-HI M8/M10 assy mm 1/2 in 62 mm 20 x 1 mm 35 mm 600 N 17 db (A) 25 pc MP-HI M8/M10 assy mm 3/4 in 69 mm 20 x 1 mm 38 mm 600 N 17 db (A) 25 pc MP-HI M8/10 assy mm 1 in 76 mm 20 x 1 mm 41 mm 600 N 17 db (A) 25 pc MP-HI M8/M10 assy mm 1-1/4 in 86 mm 20 x 1.2 mm 46 mm 750 N 17 db (A) 25 pc MP-HI M8/M10 assy mm 1-1/2 in 93 mm 20 x 1.2 mm 49 mm 750 N 17 db (A) 25 pc MP-HI M8/M10 assy mm 100 mm 20 x 1.2 mm 53 mm 750 N 17 db (A) 25 pc MP-HI M8/M10 assy mm 2 in 108 mm 20 x 1.2 mm 57 mm 750 N 17 db (A) 10 pc MP-HI M8/M10 assy mm 128 mm 25 x 1.8 mm 63 mm 1200 N 17 db (A) 10 pc MP-HI M8/M10 assy mm 2-1/2 in 137 mm 25 x 1.8 mm 67 mm 1200 N 17 db (A) 10 pc MP-HI M8/M10 assy mm 3 in 146 mm 25 x 1.8 mm 72 mm 1200 N 17 db (A) 10 pc MP-HI M8/M10 assy mm 155 mm 25 x 1.8 mm 76 mm 1200 N 17 db (A) 10 pc MP-HI M8/M10 assy mm 164 mm 25 x 1.8 mm 81 mm 1200 N 17 db (A) 10 pc MP-HI M8/10 assy mm 4 in 175 mm 25 x 2.2 mm 86 mm 1500 N 17 db (A) 10 pc MP-HI M8/M10 assy mm 185 mm 25 x 2.2 mm 91 mm 1500 N 17 db (A) 10 pc MP-HI M8/M10 assy mm 193 mm 25 x 2.2 mm 95 mm 1500 N 17 db (A) 10 pc MP-HI M8/M10 assy mm 5 in 203 mm 25 x 2.2 mm 100 mm 1500 N 17 db (A) 10 pc MP-HI M8/M10 assy mm 211 mm 25 x 2.2 mm 104 mm 1500 N 17 db (A) 10 pc MP-HI M8/10 assy mm 220 mm 25 x 2.2 mm 109 mm 1500 N 17 db (A) 10 pc MP-HI M8/M10 assy mm 6 in 228 mm 25 x 2.2 mm 113 mm 1500 N 17 db (A) 10 pc

56 Pipe Rings Heavy-duty pipe ring MP-MI M10/M12 Heavy-duty pipe installations in diameters up to 250 mm of industrial pipework Process and control lines M8 clamping screws, secured against loss, with comination cross-recess head Welded-on heavy-duty nuts for clamping screw sizes 68 / 72 and above Pre-assembled non-slip rubber profile S235JRG - DIN EN Galvanized Temperature resistance C Hardness insulation material Noise reduction Approvals Insulation material 50 ±5 Shore A 19 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2 EPDM rubber Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Noise reduction Sales pack Item number MP-MI 3/8 G mm 3/8 in 64 mm 24 x 2 mm 33 mm 1800 N 19 db (A) 25 pc MP-MI 1/2 G mm 1/2 in 69 mm 24 x 2 mm 36 mm 1800 N 19 db (A) 25 pc MP-MI 1 G mm 1 in 83 mm 24 x 2 mm 42 mm 1800 N 19 db (A) 25 pc MP-MI 1 1/4 G mm 1-1/4 in 92 mm 24 x 2 mm 47 mm 1800 N 19 db (A) 25 pc MP-MI 1 1/2 G mm 1-1/2 in 101 mm 24 x 2 mm 50 mm 1800 N 19 db (A) 25 pc MP-MI 54/57 G mm 107 mm 24 x 2 mm 53 mm 1800 N 19 db (A) 10 pc MP-MI 2 G mm 2 in 111 mm 24 x 2 mm 55 mm 1800 N 19 db (A) 10 pc MP-MI 68/72 G mm 123 mm 24 x 2 mm 60 mm 1800 N 19 db (A) 10 pc MP-MI 2 1/2 G mm 2-1/2 in 130 mm 24 x 2 mm 64 mm 1800 N 19 db (A) 10 pc MP-MI 78/84 G mm 139 mm 24 x 2 mm 68 mm 1800 N 19 db (A) 10 pc MP-MI 3 G mm 3 in 144 mm 24 x 2 mm 71 mm 1800 N 19 db (A) 10 pc MP-MI G mm 163 mm 30 x 2.5 mm 78 mm 2400 N 19 db (A) 5 pc MP-MI 4 G mm 4 in 174 mm 30 x 2.5 mm 84 mm 2400 N 19 db (A) 5 pc MP-MI 125 G mm 187 mm 30 x 2.5 mm 90 mm 2400 N 19 db (A) 5 pc MP-MI 133 G mm 198 mm 30 x 2.5 mm 95 mm 2400 N 19 db (A) 10 pc MP-MI 5 G mm 5 in 203 mm 30 x 2.5 mm 98 mm 2400 N 19 db (A) 10 pc MP-MI 159 G mm 223 mm 30 x 2.5 mm 107 mm 2400 N 19 db (A) 10 pc MP-MI 6 G mm 6 in 229 mm 30 x 2.5 mm 110 mm 2400 N 19 db (A) 10 pc Systems 501

Pipe Rings Heavy-duty pipe ring MP-MI M16 Heavy-duty pipe installations in diameters up to 250 mm of industrial pipework Process and control lines M8 clamping screws, secured against loss, with

-40-110 C Hardness insulation material Noise reduction Approvals Insulation material 50 ±5 Shore A 19 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2 EPDM rubber Ordering designation

57 Pipe Rings Heavy-duty pipe ring MP-MI M16 Heavy-duty pipe installations in diameters up to 250 mm of industrial pipework Process and control lines M8 clamping screws, secured against loss, with comination cross-recess head Welded-on heavy-duty nuts for clamping screw sizes 68 / 72 and above Pre-assembled non-slip rubber profile S235JRG - DIN EN Galvanized Temperature resistance C Hardness insulation material Noise reduction Approvals Insulation material 50 ±5 Shore A 19 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2 EPDM rubber Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Noise reduction Sales pack Item number MP-MI 2 C mm 2 in 111 mm 24 x 2 mm 56 mm 1800 N 19 db (A) 10 pc MP-MI 2 1/2 C mm 2-1/2 in 130 mm 24 x 2 mm 65 mm 1800 N 19 db (A) 10 pc MP-MI 3 C mm 3 in 144 mm 24 x 2 mm 72 mm 1800 N 19 db (A) 10 pc MP-MI 133 C mm 198 mm 30 x 2.5 mm 96 mm 2400 N 19 db (A) 10 pc MP-MI 159 C mm 223 mm 30 x 2.5 mm 107 mm 2400 N 19 db (A) 10 pc MP-MI 6 C mm 6 in 229 mm 30 x 2.5 mm 111 mm 2400 N 19 db (A) 10 pc MP-MI C mm 263 mm 30 x 3 mm 127 mm 4500 N 19 db (A) 10 pc MP-MI 212 C mm 283 mm 30 x 3 mm 136 mm 4500 N 19 db (A) 10 pc MP-MI C mm 8 in 288 mm 30 x 3 mm 139 mm 4500 N 19 db (A) 10 pc MP-MI C mm 314 mm 30 x 3 mm 152 mm 4500 N 19 db (A) 5 pc

Pipe Rings Heavy-duty pipe ring (metric) MP-MXI Heavy-duty installations up to 508 mm Process and control lines Heavy-duty pipe runs Solid connection boss, welded all round Strong clamping bolts for

Shore A 16 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2 EPDM rubber Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x

58 Pipe Rings Heavy-duty pipe ring (metric) MP-MXI Heavy-duty installations up to 508 mm Process and control lines Heavy-duty pipe runs Solid connection boss, welded all round Strong clamping bolts for high loads Non-slip, pre-fitted profiled rubber inlay DD11 - DIN EN Galvanized Temperature resistance C Hardness insulation material Noise reduction Approvals Insulation material 50 ±5 Shore A 16 db (A) Acustic insulaton DIN 4109 inspected, Fire class B2 EPDM rubber Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Distance between holes - A Sales pack Item number MP-MXI 4 M mm 4 in 210 mm 40 x 4 mm 90 mm 3100 N 172 mm 25 pc MP-MXI 125 M mm 221 mm 40 x 4 mm 95 mm 3100 N 183 mm 25 pc MP-MXI 133 M mm 231 mm 40 x 4 mm 100 mm 3100 N 193 mm 10 pc MP-MXI 5 M mm 5 in 238 mm 40 x 4 mm 104 mm 3100 N 200 mm 10 pc MP-MXI 159 M mm 261 mm 40 x 4 mm 115 mm 3100 N 223 mm 10 pc MP-MXI 6 M mm 6 in 265 mm 40 x 4 mm 117 mm 7500 N 234 mm 10 pc MP-MXI M mm 284 mm 40 x 4 mm 123 mm 7500 N 246 mm 10 pc MP-MXI M mm 303 mm 40 x 4 mm 132 mm 7500 N 264 mm 10 pc MP-MXI 210 M mm 321 mm 40 x 4 mm 141 mm 7500 N 283 mm 10 pc MP-MXI 219 M mm 330 mm 40 x 4 mm 146 mm 7500 N 292 mm 10 pc MP-MXI M mm 355 mm 40 x 4 mm 158 mm 7500 N 317 mm 10 pc MP-MXI 267/274 M mm 375 mm 40 x 4 mm 167 mm 7500 N 334 mm 10 pc MP-MXI 275 M mm 384 mm 40 x 4 mm 173 mm 7500 N 346 mm 10 pc MP-MXI 324 M mm 441 mm 50 x 5 mm 190 mm N 391 mm 1 pc MP-MXI 326 M mm 445 mm 50 x 5 mm 192 mm N 394 mm 1 pc MP-MXI 368 M mm 488 mm 50 x 5 mm 213 mm N 437 mm 1 pc MP-MXI 406 M mm 525 mm 50 x 5 mm 232 mm N 474 mm 1 pc MP-MXI 457 M mm 586 mm 70 x 6 mm 259 mm N 530 mm 1 pc MP-MXI 508 M mm 632 mm 70 x 6 mm 282 mm N 577 mm 1 pc Systems 503

Pipe Rings Sprinkler pipe hanger LH Sprinkler installations Cost-efficient pipe installation thanks to pre-assembled sprinkler band hangers Coordinated system of sprinkler components from one

size (imperial) Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Approvals Sales pack Item number LH 1/2 M10 20-25 mm 1/2 in 16 x 1.

59 Pipe Rings Sprinkler pipe hanger LH Sprinkler installations Cost-efficient pipe installation thanks to pre-assembled sprinkler band hangers Coordinated system of sprinkler components from one supplier - reduces administrative work as you are dealing with only one company Carbon steel type B - ASTM A653M- 06a, SGCC - JISG 3302 Galvanized Ordering designation Clamping range - D Nominal pipe size (imperial) Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Approvals Sales pack Item number LH 1/2 M mm 1/2 in 16 x 1.2 mm 62 mm 2000 N UL approved EX pc LH 3/4 M mm 3/4 in 16 x 1.2 mm 63 mm 2000 N UL approved EX15279, 100 pc FM approved LH 1 M mm 1 in 16 x 1.2 mm 67 mm 2000 N UL approved EX15279, 100 pc FM approved LH 1-1/4 M mm 1-1/4 in 16 x 1.2 mm 71 mm 2000 N UL approved EX15279, 100 pc FM approved LH 1-1/2 M mm 1-1/2 in 16 x 1.2 mm 77 mm 2000 N UL approved EX15279, 100 pc FM approved LH 2 M mm 2 in 16 x 1.2 mm 79 mm 2000 N UL approved EX15279, 100 pc FM approved LH 2-1/2 M mm 2-1/2 in 19 x 2 mm 98 mm 4500 N UL approved EX15279, FM approved 100 pc

Pipe Rings Sprinkler pipe hanger M10, M12, M16 MP-SP Sprinkler installations Insert the pipe, press to close, click - that s all Time-saving solution Simple levelling with the new height adjuster

Galvanized FM approved, UL approved EX2709, VDS approved G4930027 Ordering designation Clamping range - D Nominal pipe size (imperial) Cross section width and thickness (b x s) Distance centre pipe

60 Pipe Rings Sprinkler pipe hanger M10, M12, M16 MP-SP Sprinkler installations Insert the pipe, press to close, click - that s all Time-saving solution Simple levelling with the new height adjuster with one hand: no accident risk as the pipe and pipe ring don t have to be swivelled round to be screwed onto the threaded rod, and no special nut is required DX51D Z275 - DIN EN Approvals Galvanized FM approved, UL approved EX2709, VDS approved G Ordering designation Clamping range - D Nominal pipe size (imperial) Cross section width and thickness (b x s) Distance centre pipe to top - h Maximum load - F Approvals MP-SP 3/4 -M mm 3/4 in 21 x 1.5 mm 50 mm 2000 N FM approved, UL approved EX2709, VDS approved G MP-SP 1 -M mm 1 in 21 x 1.5 mm 50 mm 2000 N FM approved, UL approved EX2709, VDS approved G MP-SP 1 1/4 -M mm 1-1/4 in 21 x 1.5 mm 58 mm 2000 N FM approved, UL approved EX2709, VDS approved G MP-SP 1 1/2 -M mm 1-1/2 in 21 x 1.5 mm 65 mm 2000 N FM approved, UL approved EX2709, VDS approved G MP-SP 2 -M mm 2 in 21 x 1.5 mm 73 mm 2000 N FM approved, UL approved EX2709, VDS approved G MP-SP 2 1/2 -M mm 2-1/2 in 20 x 2.5 mm 78 mm 5000 N FM approved, UL approved EX2709, VDS approved G MP-SP 3 -M mm 3 in 20 x 2.5 mm 96 mm 5000 N FM approved, UL approved EX2709, VDS approved G MP-SP 108-M mm MP-SP 4 -M mm MP-SP 133-M mm MP-SP 5 -M mm MP-SP 159-M mm MP-SP 6 -M mm MP-SP 219,1-M mm 20 x 2.5 mm 5000 N FM approved, UL approved EX2709, VDS approved G in 20 x 2.5 mm 131 mm 5000 N FM approved, UL approved EX2709, VDS approved G x 2.5 mm 108 mm 6000 N FM approved, UL approved EX2709, VDS approved G in 24 x 2.5 mm 115 mm 6000 N FM approved, UL approved EX2709, VDS approved G x 2.5 mm 133 mm 6000 N FM approved, UL approved EX2709, VDS approved G in 24 x 2.5 mm 142 mm 6000 N FM approved, UL approved EX2709, VDS approved G x 2.5 mm 186 mm 7000 N FM approved, UL approved EX2709, VDS approved G Sales pack Item number 100 pc pc pc pc pc pc pc pc pc pc pc pc pc pc Systems 505

61 Pipe Rings Refrigeration pipe ring MI-CF For installing chilled pipes up to 3 diameter in industrial and air conditioning applications Fastening pipes for refrigeration and air-conditioning systems Contains no H-CFCs or CFCs Easy initial installation of the pipe thanks to the two-screw pipe ring with pivot mechanism Closed-cell polyurethane foam Galvanized Temperature resistance C Thermal conductivity (λ approx. value) Approx. density Compressive strength 0.03 W/mK 80 kg/m³ 0.7 N/mm² Diffusion resistance Impermeable = Ordering designation Diameter - D Nominal pipe size (imperial) Cross section width and thickness (b x s) Maximum load - F Clamping screw Tightening torque Sales pack Item number MI-CF 21/ mm 1/2 in 75 x 25 mm 50 N M16 20 Nm 20 pc MI-CF 27/ mm 3/4 in 75 x 25 mm 100 N M6 2 Nm 20 pc MI-CF 34/ mm 1 in 75 x 25 mm 125 N M6 2 Nm 20 pc MI-CF 42/ mm 1-1/4 in 75 x 25 mm 155 N M6 2 Nm 12 pc MI-CF 48/ mm 1-1/2 in 75 x 25 mm 180 N M6 2 Nm 12 pc MI-CF 60/ mm 2 in 75 x 25 mm 220 N M6 2 Nm 10 pc MI-CF 76/ mm 2-1/2 in 75 x 25 mm 280 N M6 2 Nm 10 pc

Pipe Rings Refrigeration pipe ring MI-CF Fastening pipes for refrigeration and air-conditioning systems Closed-cell polyurethane foam Contains no H-CFCs or CFCs Impact-resistant,

approx. value) Approx. density 0.03 W/mK 80 kg/m³ Compressive strength 0.

62 Pipe Rings Refrigeration pipe ring MI-CF Fastening pipes for refrigeration and air-conditioning systems Closed-cell polyurethane foam Contains no H-CFCs or CFCs Impact-resistant, aluminium-pet-aluminium laminations Easy initial installation of the pipe thanks to the two-screw pipe ring with pivot mechanism Galvanized Temperature resistance C Thermal conductivity (λ approx. value) Approx. density 0.03 W/mK 80 kg/m³ Compressive strength 0.7 N/mm² Diffusion resistance Impermeable Approvals Fire class B2 = Ordering designation Diameter - D Nominal pipe size (imperial) Cross section width and thickness (b x s) Maximum load - F Approvals Clamping screw Tightening torque Sales pack Item number MI-CF 21/ mm 1/2 in 75 x 30 mm 80 N Fire class B2 M6 2 Nm 20 pc MI-CF 27/ mm 3/4 in 75 x 30 mm 100 N Fire class B2 M6 2 Nm 16 pc MI-CF 34/ mm 1 in 75 x 30 mm 125 N Fire class B2 M6 2 Nm 12 pc MI-CF 42/ mm 1-1/4 in 75 x 30 mm 155 N Fire class B2 M6 2 Nm 12 pc MI-CF 48/ mm 1-1/2 in 75 x 30 mm 180 N Fire class B2 M6 2 Nm 12 pc MI-CF 54/30 54 mm 75 x 30 mm 160 N Fire class B2 M6 2 Nm 12 pc MI-CF 60/ mm 2 in 75 x 30 mm 220 N Fire class B2 M6 2 Nm 10 pc MI-CF 76/ mm 2-1/2 in 75 x 30 mm 280 N Fire class B2 M6 2 Nm 10 pc MI-CF 89/ mm 3 in 100 x 30 mm 325 N Fire class B2 M6 2 Nm 10 pc Systems 507

Pipe Rings Refrigeration pipe ring (medium insulated) MIP-M For installing chilled pipes and ducts up to 410 mm diameter in industrial and air-conditioning applications Designed for standard

thermal short-circuits) Temperature resistance -40-105 C Noise reduction Thermal conductivity (λ approx. value) Approx.

63 Pipe Rings Refrigeration pipe ring (medium insulated) MIP-M For installing chilled pipes and ducts up to 410 mm diameter in industrial and air-conditioning applications Designed for standard thicknesses of insulating material (material: elastomeric caoutchouc) Excellent joint between refrigeration pipe ring and insulating material (elastomeric caoutchouc) Completely isolated system (no thermal short-circuits) Temperature resistance C Noise reduction Thermal conductivity (λ approx. value) Approx. density CFC-free PUR/PIR (elastomer), outside bearing shells made of painted aluminium sheeting 0.8 mm thick Galvanized 15 db (A) W/mK 145 kg/m³ Diffusion resistance 7000 Approvals Acustic insulaton DIN 4109 inspected, Fire class B2 Ordering designation Clamping range - D Nominal pipe size (imperial) Width - B Cross section width and thickness (b x s) Max. extension from centre - b1 Distance centre pipe to top - h Maximum load - F Sales pack Item number MIP-M/ mm 1/4 in 94 mm 55 x 20 mm 44 mm 48 mm 40 N 18 pc MIP-M/ mm 3/8 in 102 mm 55 x 20 mm 48 mm 52 mm 50 N 18 pc MIP-M/ mm 1/2 in 107 mm 55 x 20 mm 51 mm 55 mm 75 N 12 pc MIP-M/ mm 3/4 in 113 mm 55 x 21 mm 54 mm 57 mm 75 N 12 pc MIP-M/ mm 1 in 119 mm 65 x 22 mm 57 mm 64 mm 150 N 12 pc MIP-M/ mm 1-1/4 in 134 mm 65 x 22 mm 64 mm 68 mm 200 N 12 pc MIP-M/ mm 154 mm 65 x 23 mm 76 mm 75 mm 300 N 12 pc MIP-M/ mm 2 in 161 mm 75 x 23 mm 79 mm 79 mm 475 N 12 pc MIP-M/ mm 2-1/2 in 176 mm 85 x 24 mm 86 mm 86 mm 750 N 12 pc MIP-M/ mm 3 in 186 mm 100 x 24 mm 91 mm 91 mm 1100 N 10 pc MIP-M/ mm 216 mm 100 x 25 mm 107 mm 107 mm 1300 N 8 pc MIP-M/ mm 4 in 214 mm 116 x 25 mm 105 mm 105 mm 1700 N 6 pc MIP-M/ mm 235 mm 116 x 25 mm 119 mm 116 mm 2000 N 6 pc MIP-M/ mm 5 in 254 mm 116 x 25 mm 133 mm 126 mm 2000 N 6 pc MIP-M/ mm 274 mm 118 x 25 mm 138 mm 136 mm 2200 N 6 pc MIP-M/ mm 6 in 274 mm 128 x 25 mm 138 mm 136 mm 2600 N 3 pc MIP-M/ mm 363 mm 170 x 25 mm 182 mm 154 mm 5000 N 3 pc MIP-M/ mm 428 mm 170 x 25 mm 210 mm 183 mm 6000 N 1 pc

64 Pipe Hangers and Riser Clamps Standard duty clevis hanger SDC Heavy-duty support for piping systems All models are for use with ANSI/MSS SP-58 (Type 1) heavyduty sizes Attachment to threaded rod porvides easy installation and hight adjustment Q235B - ASTM A36 Electrogalvanized Ordering designation Nominal pipe size (imperial) Distance centre pipe to top - h Cross section width - b SDC 1/2 EG 1/2 in 41 mm 19 mm M10 UL approved EX15279 SDC 1-1/4 EG 1-1/4 in 59 mm 25 mm M10 UL approved EX15279 SDC 1 EG 1 in 51 mm 19 mm M10 UL approved EX15279 SDC 2-1/2 EG 2-1/2 in 96 mm 30 mm M12 UL approved EX15279, FM approved SDC 2 EG 2 in 76 mm 25 mm M10 UL approved EX15279 SDC 3/4 EG 3/4 in 47 mm 19 mm M10 UL approved EX15279 SDC 3 EG 3 in 109 mm 30 mm M12 UL approved EX15279, FM approved SDC 4 EG 4 in 136 mm 30 mm M16 UL approved EX15279, FM approved SDC 5 EG 5 in 163 mm 30 mm M16 UL approved EX15279, FM approved SDC 6 EG 6 in 196 mm 38 mm M20 UL approved EX15279, FM approved SDC 8 EG 8 in 242 mm 38 mm M20 UL approved EX15279, FM approved SDC 10 EG 10 in 299 mm 50 mm M24 UL approved EX15279 SDC 12 EG 12 in 305 mm 50 mm M24 UL approved EX15279 Rod size - RS Approvals Allowable load Weight Sales pack Item number 2.8 kn 0.07 kg 50 pc kn 0.12 kg 25 pc kn 0.08 kg 50 pc kn 0.39 kg 10 pc kn 0.17 kg 25 pc kn 0.07 kg 50 pc kn 0.43 kg 10 pc kn 0.6 kg 10 pc kn 0.95 kg 5 pc kn 1.73 kg 5 pc kn 2.5 kg 2 pc kn 4.5 kg 2 pc kn 5 kg 2 pc Systems 509

65 Hot-Dip Galvanized Parts Editorial Page Editorial Full Page 09 System MQ/MC Channel Hot Dipped Galvanized Hilti. Outperform. Outlast. 510

66 Hot-Dip Galvanized Parts channel MQ-21 HDG ASTM Pipework Air ducts Cable trays S235JR - DIN EN Hot-dip galvanized, 65 µm - ASTM A123 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21 6m HDG 21 mm 6 m 2 mm 1480 g RAL-GZ 655-C 6 m ASTM channel MQ-41 HDG ASTM Pipework Air ducts Cable trays S235JR - DIN EN Hot-dip galvanized, 65 µm - ASTM A123 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41 6m HDG ASTM 41 mm 6 m 2 mm 2130 g RAL-GZ 655-C 6 m channel MQ-52 HDG ASTM Pipework Air ducts Cable trays S235JR - DIN EN Hot-dip galvanized, 65 µm - ASTM A123 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-52 6m HDG ASTM 52 mm 6 m 2.5 mm 3010 g RAL-GZ 655-C 6 m Systems 511

67 Hot-Dip Galvanized Parts channel MQ-72 HDG ASTM Pipework Air ducts Cable trays S235JR - DIN EN Hot-dip galvanized, 65 µm - ASTM A123 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-72 6m HDG ASTM 72 mm 6 m 2.75 mm 4200 g RAL-GZ 655-C 6 m channel MQ-21-HDG plus Pipework Air ducts Cable trays S235JR - DIN EN Continuous hot-dip galvanized, approx. 70 µm - DIN EN C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21-HDG plus 6m 21 mm 6 m 2 mm 1480 g RAL-GZ 655-C 6 m channel MQ-31-HDG plus Pipe work Air ducts Cable trays S235JR - DIN EN Continuous hot-dip galvanized, approx. 70 µm - DIN EN C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-31-HDG plus 6m 31 mm 6 m 2 mm 1760 g RAL-GZ 655-C 6 m

68 Hot-Dip Galvanized Parts channel MQ-41-HDG plus Pipework Air ducts Cable trays S235JR - DIN EN Continuous hot-dip galvanized, approx. 70 µm - DIN EN C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41-HDG plus 6m 41 mm 6 m 2 mm 2130 g RAL-GZ 655-C 6 m channel MQ-21 D-HDG plus Pipework Air ducts Cable trays S235JR - DIN EN Continuous hot-dip galvanized, approx. 70 µm - DIN EN C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21-D-HDG plus 41 mm 6 m 2 mm 2980 g RAL-GZ 655-C 6 m m Hot-dip galvanized double installation channel (HDG plus) MQ-41 D-HDG plus Pipework Air ducts Cable trays S235JR - DIN EN Continuous hot-dip galvanized, approx. 70 µm - DIN EN C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41 D-HDG plus 6m 83 mm 6 m 2 mm 4290 g RAL-GZ 655-C 6 m Systems 513

69 Hot-Dip Galvanized Parts Hot-dip galvanized installation channel MQ-21-F Pipework Air ducts Cable trays S235JR - DIN EN Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21-F 6m 21 mm 6 m 2 mm 1480 g RAL-GZ 655-C 6 m Hot-dip galvanized installation channel MQ-41-F Pipework Air ducts Cable trays S235JR - DIN EN Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41-F 6m 41 mm 6 m 2 mm 2130 g RAL-GZ 655-C 6 m Hot-dip galvanized installation channel MQ-52-F Pipework Air ducts Cable trays S235JR - DIN EN Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-52-F 6m 52 mm 6 m 2.5 mm 3010 g RAL-GZ 655-C 6 m

70 Hot-Dip Galvanized Parts Hot-dip galvanized installation channel MQ-72-F Pipework Air ducts Cable trays S235JR - DIN EN Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Aesthetic appearance Pre-marked dimensions make installation, assembly and cutting easy Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-72-F 6m 72 mm 6 m 2.75 mm 4200 g RAL-GZ 655-C 6 m Hot-dip galvanized installation channel MQ-21 D-F Pipework Air ducts Cable trays S250GD - DIN EN Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21 D-F 6m 41 mm 6 m 2 mm 2970 g RAL-GZ 655-C 6 m Hot-dip galvanized installation channel MQ-41 D-F Pipework Air ducts Cable trays S250GD - DIN EN Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41 D-F 6m 83 mm 6 m 2 mm 4290 g RAL-GZ 655-C 6 m Systems 515

71 Hot-Dip Galvanized Parts Hot-dip galvanized double installation channel MQ D-F Pipework Air ducts Cable trays S250GD - DIN EN Hot-dip galvanized, 45 µm - DIN EN ISO 1461 C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ D-F 6m 124 mm 6 m 2.5 mm, 2.75 mm 7260 g RAL-GZ 655-C 6 m Hot-dip galvanized bracket MQK-21-F For stand-alone use on ceilings, walls and floors or in conjunction with channel systems For the installation of cable trays, air ducts and pipe supports Serrated C-section Pre-marked dimensions make installation, assembly and measurement easy Great flexibility and easy alignment S235JR - DIN EN Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Profile Length - L Material thickness Weight Sales pack Item number MQK-21/300-F MQ-21-F 300 mm Channel: 2 mm, Baseplate: 6 mm 670 g 10 pc MQK-21/450-F MQ-21-F 450 mm Channel: 2 mm, Baseplate: 6 mm 890 g 10 pc Hot-dip galvanized bracket MQK-41-F Stand-alone use on ceilings, walls and floors or combined with channel systems For the installation of cable trays, air ducts and pipe supports Serrated C-section Pre-marked dimensions make installation, assembly and measurement easy Great flexibility and easy alignment S235JR - DIN EN Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Profile Length - L Material thickness Weight Approvals Sales pack Item number MQK-41/300-F MQ-41-F 300 mm Channel: 2 mm, Baseplate: 8 mm 950 g Fire resistance test IBMB 3646/261/07 10 pc

72 Hot-Dip Galvanized Parts Hot-dip galvanized bracket MQK-72-F Stand-alone use on ceilings, walls and floors or combined with channel systems For the installation of cable trays, air ducts and pipe supports Serrated C-section Pre-marked dimensions make installation, assembly and measurement easy Great flexibility and easy alignment S235JR - DIN EN Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Profile Length - L Material thickness Weight Approvals Sales pack MQK-72/450-F MQ-72-F 450 mm Channel: 2.75 mm, Baseplate: 10 mm 2510 g Fire resistance test IBMB 3646/261/07 Item number 6 pc MQK-72/600-F MQ-72-F 600 mm Channel: 2.75 mm, Baseplate: 10 mm 3130 g Fire resistance test IBMB 3646/261/07 6 pc Hot-dip galvanized angle brace MQK-S-F Recommended for fabricating wall brackets with individual stand-off lengths Increases the loadbearing capacity of brackets Easily customized stand-alone structures Channel assembly in two positions is possible For making your own brackets S235JR - DIN EN Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Height - H Length - L a Material thickness Weight Sales pack Item number MQK-SK-F 328 mm 324 mm 355 mm 3 mm 650 g 10 pc MQK-SL-F 528 mm 524 mm 635 mm 3 mm 1060 g 10 pc Systems 517

73 Hot-Dip Galvanized Parts Channel connector HDG plus MQN-HDG plus Recommended for connecting angles to channels One-piece component for connecting channels and structural elements Simple, compact, time-saving Provides a secure hold once pressed in, turned and tightened Universal: one pushbutton for all connectors and MQ installation channels Bolt: grade DIN EN ISO 898, Nut: C4C - DIN EN 10263, Plate: DD11 - DIN EN Multi-layer coating performance in salt spray test equal to hot-dip galvanizing Approvals Fire resistance test IBMB 3646/261/07 Additional product information Coating designed for corrosion environment category C3 according to EN ISO 9223 Ordering designation Wrench size Approvals Tightening torque Weight Sales pack Item number MQN-HDG plus 17 mm Fire resistance test IBMB 3646/261/07 40 Nm 66 g 50 pc Wing nut MQM-DG plus Simple part for connecting channels to parts of structures Simple, compact, time-saving Flush design of channel wing nut Easy disassembly Additional product information Wings: plastic PA, Nut: QStE 380 TM, SEW 92 Multi-layer coating Coating designed for corrosion environment category C3 according to EN ISO 9223 Ordering designation Thread - M Tightening torque Weight Sales pack Item number MQM-M6 HDG plus M6 10 Nm 23 g 50 pc MQM-M8 HDG plus M8 20 Nm 23 g 50 pc MQM-M10 HDG plus M10 40 Nm 22 g 50 pc

74 Hot-Dip Galvanized Parts Hot-dip galvanized wing nut MQM-F Simple part for connecting channels to parts of structures Simple, compact and time-saving Flush design of channel wing nut Easy disassembly Wings: plastic PA, Nut: C4C - DIN EN Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Thread - M Tightening torque Weight Sales pack Item number MQM-M12-F M12 40 Nm 36 g 25 pc Hot-dip galvanized pipe ring saddle MQA-F Various suspensions with threaded rods Pipe ring saddle for pipe installation For metric threads One-piece, time-saving and easy to handle Only one type of saddle nut for all MQ channels Easy alignment in the right position Nut: EN-GJMW DIN EN 1562, Plate: S235JR - DIN EN 10025, Plastic: PB Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Thread - M Approvals Tightening torque Weight Sales pack Item number MQA-M8-F M8 9 Nm 75 g 25 pc MQA-M10-F M10 Fire resistance test IBMB 3646/261/07 18 Nm 73 g 25 pc MQA-M12-F M12 Fire resistance test IBMB 3646/261/07 31 Nm 71 g 25 pc MQA-M16-F M16 Fire resistance test IBMB 3646/261/07 40 Nm 82 g 25 pc Hot-dip galvanized angle MQW 90 -F Assembly of frames as well as other assemblies Quick installation Suitability for universal use results in fewer parts for a variety of applications Easy to handle S235JR - DIN EN Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Systems 519

75 Hot-Dip Galvanized Parts Ordering designation Angle Weight Sales pack Item number MQW-2-F g 20 pc MQW-P2-F g 10 pc MQW-3-F g 20 pc MQW-4-F g 10 pc MQW-8/90-F g 10 pc Hot-dip galvanized angle MQW 45 /135 -F Assembly of frames and structures Connection of channels Quick installation Universal: only a few parts required for many different applications S235JR - DIN EN Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Angle Weight Sales pack Item number MQW-3/45-F g 20 pc MQW-2/45-F g 10 pc MQW-8/45-F g 10 pc

76 Hot-Dip Galvanized Parts Hot-dip galvanized angle bracket MQW-S-F Assembly of frames and structures Connection of channels For fastening to walls, floors and ceilings Quick installation Universal: few parts for all applications S235JR - DIN EN Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Angle Weight Sales pack Item number MQW-S/1-F g 10 pc MQW-S/2-F g 10 pc Connector 2-D HDG MQV-2D-F For clever single-plane channel design Universal: few parts for various applications Easy to use S235JR - DIN EN Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Angle Weight Sales pack Item number MQV-2/2 D-F g 10 pc MQV-3/2 D-F g 10 pc Hot-dip galvanized 3-D connector MQV-3D-F For clever 3D channel design Universal: few parts for various applications Easy to use Three dimensional S235JR - DIN EN Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Angle Weight Sales pack Item number MQV-3/3 D-F g 10 pc Systems 521

77 Hot-Dip Galvanized Parts Ordering designation Angle Weight Sales pack Item number MQV-4/3 D-F g 10 pc Hot-dip galavanized longitudinal connector MQV-F Connecting two MQ channels together Quick extension of installation channels Easy to handle S235JR - DIN EN Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MQV-12-F 583 g 10 pc Hot-dip galavanized longitudinal connector MQV-F For connecting two MQ channels together Simple extension of channel length The MQN-F pushbutton can be prefitted Easy to handle S235JR - DIN EN Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MQV-P4-F 188 g 10 pc Hot-dip galvanized flat connector MQV-T-F For clever single-plane channel design Universal: few parts for various applications Easy to use S235JR - DIN EN Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MQV-T-F 196 g 10 pc Hot-dip galvanized rail support MQV 2/2 D-F Connection of channels to any supporting material High application flexibility Reliable and easy to use S235JR - DIN EN Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm 522

78 Hot-Dip Galvanized Parts Ordering designation Weight Sales pack Item number MQV-2/2 D-14-F 451 g 10 pc Hot-dip galvanized rail support MQP-1-F Connection of channels to any supporting material High application flexibility Reliable and easy to use S235JR - DIN EN Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MQP-1/1-F 110 g 20 pc MQP-1/3-F 190 g 20 pc Hot-dip galvanized rail support MQP-F Connection of channels to any supporting material High application flexibility Reliable and easy to use Pre-assembly of the MQN HDG plus pushbutton is possible S235JR - DIN EN Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Weight Approvals Sales pack Item number MQP F 1150 g Fire resistance test IBMB 3646/261/07 12 pc MQP-82-F 1880 g 8 pc MQP-124-F 2730 g 6 pc Hot-dip galvanized rail support MQP-G-F For constructing channel structures for attachment to almost any supporting materials For connecting structures to inclined surfaces Channel connection on rotatable base High application flexibility Easy to attach to walls, ceilings, floors with anchors S235JR - DIN EN Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Systems 523

79 Hot-Dip Galvanized Parts Ordering designation Weight Sales pack Item number MQP-G-F 1055 g 10 pc Hot-dip galvanized beam clamp MQT-F For fastening MQ channels to steel beams without drilling or welding (use only in pairs!) No drilling or welding neccessary Versatile, no small parts to lose The attachment fits all standard beams (max. clamping thickness = 23 mm) U-bolt: S235JRG2 - DIN EN Additional product information Hot-dip galvanized, 56 µm - ASTM A153 Beam clamps always to be used in pairs Ordering designation Thread - M Wrench size Tightening torque Weight Sales pack Item number MQT F M8 13 mm 10 Nm 500 g 10 pc MQT F M10 17 mm 20 Nm 650 g 10 pc Clamp (channel to channel) HDG MQB-F Channel cross connection Universal: few parts for all applications Suitable for various MQ channel profiles Easy to handle thanks to pushbutton connectors S235JR - DIN EN Material thickness Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MQB-41-F 243 g 10 pc MQB-41x2-F 295 g 10 pc MQB-124-F 553 g 10 pc Hot-dip galvanized drilled plate MQZ-L-F For fastening metric threaded parts to MQ channel Matching items in program Suitable for MQ installation channels and brackets S235JR - DIN EN Hot-dip galvanized, 56 µm - ASTM A

80 Hot-Dip Galvanized Parts Ordering designation Hole diameter - D Weight Approvals Sales pack Item number MQZ-L9-F 9.5 mm 92 g 20 pc MQZ-L11-F 11.5 mm 88 g Fire resistance test IBMB 3646/261/07 20 pc MQZ-L13-F 13.5 mm 84 g Fire resistance test IBMB 3646/261/07 20 pc MQZ-L17-F 17.5 mm 80 g Fire resistance test IBMB 3646/261/07 20 pc Hot-dip galvanized 3D-System MQ3D-F Assembly of 3-D structures on site Bracing and stiffening of complex fastening solutions Designing three-dimensional support frames Universal: few parts for all applications Quick and easy to use 45 angle and bracing with predetermined bending point Material thickness Hot-dip galvanized, 56 µm - ASTM A153 3 mm Ordering designation Angle Thread - M Wrench size Tightening torque Weight Sales pack Item number MQ3D-W45-F 45 M10 17 mm 40 Nm 131 g 16 pc MQ3D-A-F 45 M10 17 mm 40 Nm 75 g 20 pc Systems 525

81 Hot-Dip Galvanized Parts Overview ystem MC Hot Dipped Galvanized Channels Brackets Longitudinal connector End cap MC-3D-41 OC-A 3m MC-3D-41 OC-A 6m MC-72 OC-A 6m MC-B-3D-41/350 OC-A MC-BE-320 OC-A MC-B-3D-41/450 OC-A MC-BE-630 OC-A MC-B-3D-41/650 OC-A MC-B-3D-41/1000 OC-A MC-CL OC-A MQZ-E MQZ-E Base Connector Channel Connectors Angles MC-CB OC-A MC-CH OC-A MC-CU OC-A MC-A-90 OC-A MC-AH-90 OC-A MC-AF-90 OC-A Wing nuts Channel screws Channel stiffener Channel plate MC-WN-M10 OC MC-WN-3D OC MC-SI-M10 OC-A MC-S-M10 OC-A MC-PI OC-A MC-PU OC-A Accessories MC-MI connector MI accessories M10x20-F M10x65-F M12x105-F M10-SL-F M12-F-SL-WS 3/ A10.5/28-F MC-MI-AH-90 OC-A MIA-EH MIA-EH-P

82 Hot-Dip Galvanized Parts channel HDG MC-3D-41 OC-A Cable tray supports outdoors Integrated floor supports Instrumentation supports outdoors Connectivity from all channel sides High flexibility in terms of fastening type and direction Dimension marks for easy cutting and installation Structural steel with a minimum yield strength of 275 N/mm2 Hot-dip galvanized, 65 µm - ASTM A123 Ordering designation Height Length Material thickness Weight per metre length Sales pack Item number MC-3D-41 OC-A 3m 41 mm 3 m 1.6 mm 1713 g 3 m MC-3D-41 OC-A 6m 41 mm 6 m 1.6 mm 1713 g 6 m channel HDG MC-72 OC-A Cable tray supports outdoors Integrated floor supports Instrumentation supports outdoors Serrated C-section profile High load capacity Dimension marks for easy cutting and installation Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 65 µm - ASTM A123 Ordering designation Height Length Material thickness Weight per metre length Sales pack Item number MC-72 OC-A 6m 72 mm 6 m 2.75 mm 4108 g 6 m Systems 527

83 Hot-Dip Galvanized Parts Bracket HDG MC-B-3D-41 OC-A Cable tray supports outdoors Instrumentation supports outdoors Integrated floor supports Connectivity from all channel sides High flexibility Serrated C-section profile Structural steel with a minimum yield strength of 275 N/mm2 for the channel, 355 N/mm2 for the plate Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Profile Length - L Material thickness Weight Sales pack Item number MC-B-3D-41/350 OC-A MC-3D mm 1.6 mm 1033 g 12 pc MC-B-3D-41/450 OC-A MC-3D mm 1.6 mm 1242 g 12 pc MC-B-3D-41/650 OC-A MC-3D mm 1.6 mm 1508 g 12 pc MC-B-3D-41/1000 OC-A MC-3D mm 1.6 mm 2150 g 12 pc Electrical bracket HDG MC-BE OC-A Cable tray supports outdoors Easy to install Various fastening options High load performance Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Height - H Length - L a Material thickness Weight Sales pack Item number MC-BE-320 OC-A 97 mm 322 mm 50 mm 1.5 mm 557 g 12 pc MC-BE-630 OC-A 147 mm 632 mm 100 mm 1.5 mm 1138 g 12 pc

84 Hot-Dip Galvanized Parts Longitudinal channel connector HDG MC-CL OC-A Longitudinal connector for MC channels Easy to use on the open side or back of the channel Compatible with all MC channels High load capacity Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MC-CL OC-A 708 g 20 pc Systems 529

85 Hot-Dip Galvanized Parts Base connector HDG MC-CB OC-A Connection of MC channels to concrete Fastening to floors, ceilings or walls Various, easy installation options Height adjustment High load capacity Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Weight Sales pack Item number MC-CB OC-A 925 g 12 pc Angle HDG MC-A-90 OC-A Connection of MC channels at 90 degrees Assembly of two and three-dimensional modular system structures Various, easy installation options Can be fitted regardless of the direction in which the open side of the channel is facing High load capacity Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm 530

86 Hot-Dip Galvanized Parts Ordering designation Angle Weight Sales pack Item number MC-A-90 OC-A g 10 pc Height-adjustable angle HDG MC-AH-90 OC-A Connection of MC channels at 90 degrees Assembly of two and three-dimensional modular system structures High application flexibility Easy height adjustment along the full channel length and on all channel sides High shear load capacity Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Angle Weight Sales pack Item number MC-AH-90 OC-A g 20 pc Systems 531

Hot-Dip Galvanized Parts Height-adjustable angle HDG MC-MI-AH-90 OC-A Connection of MC channels to Hilti MI channels at 90 degrees Easy to use Easy height adjustment Strong and cost-efficient

87 Hot-Dip Galvanized Parts Height-adjustable angle HDG MC-MI-AH-90 OC-A Connection of MC channels to Hilti MI channels at 90 degrees Easy to use Easy height adjustment Strong and cost-efficient connection to the Hilti MI system Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Angle Weight Sales pack Item number MC-MI-AH-90 OC-A g 10 pc Flat angle HDG MC-AF-90 OC-A Connection of MC channels at 90 degrees Various, easy installation options High application flexibility Strong and cost-efficient connection Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm 532

88 Hot-Dip Galvanized Parts Ordering designation Angle Weight Sales pack Item number MC-AF-90 OC-A g 20 pc Height-adjustable connector HDG MC-CH OC-A Cross-connector for MC channels Three-dimensional structures such as integrated floor supports Easy to install Height adjustment High load capacity Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm Ordering designation Weight Sales pack Item number MC-CH OC-A 710 g 20 pc Universal connector HDG MC-CU OC-A Connection of MC-3D channel to Hilti MC and MI installation channels Connection of MC-3D channel to concrete Bracing for modular system structures Various, easy installation options High flexibility in terms of fastening type and direction Multiple function as channel and base connector Material thickness Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 4 mm Systems 533

89 Hot-Dip Galvanized Parts Ordering designation Weight Sales pack Item number MC-CU OC-A 338 g 12 pc Wing nut MC-WN-M10 OC Fastening bolts and threaded rods at the open side of MC channel Fastening connectors at the open side of MC channel, anywhere along its length QStE 380 TM - SEW 092 Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223 Easy-to-use single part For universal use with all channel sizes Reusable Ordering designation Thread - M Tightening torque Weight Sales pack Item number MC-WN-M10 OC M10 40 Nm 22 g 50 pc Wing nut MC-WN-3D OC Fastening bolts and threaded rods at any side of MC-3D channel Fastening connectors at any side of MC-3D channel Assembly of two and three-dimensional modular system structures QStE 380 TM - SEW 092 Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223 High application flexibility Easy-to-use single part Allows connection from all sides of MC-3D channel 534

90 Hot-Dip Galvanized Parts Ordering designation Thread - M Tightening torque Weight Sales pack Item number MC-WN-3D OC M10 40 Nm 41 g 20 pc Universal plate HDG MC-PU OC-A Load distribution plate for use where bolts and threaded rods are fitted through MC channel Various, easy installation options Can be fitted on all sides of MC-3D channel Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Material thickness Hole diameter - D Weight Sales pack Item number MC-PU OC-A 4 mm 13.5 mm 53 g 100 pc Channel insert screw MC-SI-M10 OC-A Assembly of two and three-dimensional modular system structures Fitting connectors to the back or side of MC-3D channel Steel grade 8.8 Hot-dip galvanized, 56 µm - ASTM A153 Strong and cost-efficient connection High application flexibility Can be fitted at the back or side of MC-3D channel Ordering designation Thread - M Weight Sales pack Item number MC-SI-M10 OC-A M10 17 g 100 pc Systems 535

91 Hot-Dip Galvanized Parts Channel connection screw MC-S-M10 OC-A Assembly of two and three-dimensional modular system structures Fitting connectors to the back of MC channels Strong and cost-efficient connection High application flexibility Fits at the back of MC channels Steel grade 8.8 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Thread - M Weight Sales pack Item number MC-S-M10 OC-A M10 47 g 100 pc

92 Hot-Dip Galvanized Parts Channel stiffener insert MC-PI OC-A Channel stiffening insert for use where bolts and threaded rods are fitted through MC channels Easy-to-use single part Surface level with channel after installation Structural steel with a minimum yield strength of 235 N/mm2 Hot-dip galvanized, 56 µm - ASTM A153 Ordering designation Weight Sales pack Item number MC-PI OC-A 20 g 50 pc Hot-dip galvanized threaded rod AM Steel grade 4.8 Hot-dip galvanized Ordering designation Thread - M Length - L Sales pack Item number AM10x1000-F 4.8 M mm 20 pc AM10x2000-F 4.8 M mm 20 pc AM12x1000-F 4.8 M mm 15 pc AM12x2000-F 4.8 M mm 15 pc AM16x1000-F 4.8 M mm 5 pc AM16x2000-F 4.8 M mm 5 pc AM20x1000-F 4.8 M mm 5 pc AM20x2000-F 4.8 M mm 5 pc Hot-dip galvanized flat washer DIN 125 Steel Hot-dip galvanized Ordering designation Inside diameter - DI Outside diameter - DA Cross section thickness - s Sales pack Item number A 8,4/16-F 8.4 mm 16 mm 1.6 mm 100 pc A 10,5/20-F 10.5 mm 20 mm 2 mm 100 pc A 13/24-F 13 mm 24 mm 2.5 mm 100 pc A 17/30-F 17 mm 30 mm 3 mm 100 pc Systems 537

93 Hot-Dip Galvanized Parts Flat washer similar to DIN 125 (HDG) Steel grade 8 Hot-dip galvanized Ordering designation Inside diameter - DI Outside diameter - DA Cross section thickness - s Weight Sales pack Item number A 10,5/28-F 10.5 mm 28 mm 2 mm 8 g 100 pc Hot-dip galvanized hexagon nut Steel grade 8 Hot-dip galvanized - DIN EN ISO Ordering designation Thread - M Height - H Wrench size - W Sales pack Item number M8-F M8 7 mm 13 mm 100 pc M10-F M10 8 mm 17 mm 100 pc M12-F M12 10 mm 19 mm 100 pc M16-F M16 13 mm 24 mm 50 pc M20-F M20 16 mm 30 mm 50 pc Prevailing torque hexagon nut HDG Steel grade 8 Hot-dip galvanized Ordering designation Tightening torque Weight Sales pack Item number M10-SL-F 40 Nm 15 g 100 pc

94 Hot-Dip Galvanized Parts Hot-dip galvanized hexagon bolt Steel grade 8.8 Hot-dip galvanized Ordering designation Thread - M Thread length - L Height - H Wrench size - W Sales pack Item number M8x25-F M8 25 mm 5 mm 13 mm 100 pc M10x20-F M10 20 mm 6 mm 17 mm 100 pc M10x25-F M10 25 mm 6 mm 17 mm 100 pc M12x25-F M12 25 mm 8 mm 19 mm 50 pc M12x30-F M12 30 mm 8 mm 19 mm 50 pc M16x30-F M16 30 mm 10 mm 24 mm 25 pc Hexagon screw DIN 931 HDG Steel grade 8.8 Hot-dip galvanized Ordering designation Thread - M Thread length - L a Height - H Wrench size - W Weight Sales pack Item number M10x65-F M10 27 mm 65 mm 6 mm 17 mm 45 g 100 pc M12x105-F M12 32 mm 105 mm 7 mm 19 mm 105 g 50 pc Hot-dip galvanized spacer coupling Steel grade 4.6 Hot-dip galvanized Ordering designation Thread - M Length - L Diameter - D Sales pack Item number M8x25-F M8 25 mm 11 mm 50 pc M10x30-F M10 30 mm 13 mm 50 pc M12x40-F M12 40 mm 15 mm 50 pc M16x50-F M16 50 mm 20 mm 20 pc Systems 539

95 Stainless Steel Parts System MQ Channel Stainless Steel Hilti. Outperform. Outlast. 540

96 Stainless Steel Parts channel (A2 stainless steel) MQ-21-RA2 Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, (A2) - EN Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21-RA2 6m 21 mm 6 m 2 mm 1450 g RAL-GZ 655-C 6 m channel (A2 stainless steel) MQ-41-RA2 Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, (A2) - EN Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41-RA2 6m 41 mm 6 m 2 mm 2090 g RAL-GZ 655-C 6 m channel (A4 stainless steel) MQ-21-R Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, (A4) EN 10088, AISI 316L Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21-R 6m 21 mm 6 m 2 mm 1470 g RAL-GZ 655-C 6 m Systems 541

97 Stainless Steel Parts channel (A4 stainless steel) MQ-41-R Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, (A4) EN 10088, AISI 316L Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41-R 6m 41 mm 6 m 2 mm 2120 g RAL-GZ 655-C 6 m channel (A4 stainless steel) MQ-52-R Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, (A4) EN 10088, AISI 316L Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-52-R 6m 52 mm 6 m 2.5 mm 3000 g RAL-GZ 655-C 6 m channel (A4 stainless steel) MQ-21 D-R Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, (A4) EN 10088, AISI 316L Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-21 D-R 6m 41 mm 6 m 2 mm 2960 g RAL-GZ 655-C 6 m

98 Stainless Steel Parts channel (A4 stainless steel) MQ-41 D-R Recommended for installation in industrial atmospheres or areas with heavy condensation Pipework Air ducts C-profile with serrated edges Pre-marked dimensions make installation, assembly and cutting easy Modular channel system Stainless steel, (A4) EN 10088, AISI 316L Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack Item number MQ-41D-R 6m 83 mm 6 m 2 mm 4275 g RAL-GZ 655-C 6 m Bracket (A4 stainless steel) MQK-41-R For the installation of cable trays, air ducts and pipe supports For installation in industrial atmospheres or areas with high condensation Serrated C-section Pre-marked dimensions make installation, assembly and measurement easy Great flexibility and easy alignment Stainless steel, (A4) EN 10088, AISI 316L Ordering designation Profile Length - L Material thickness Weight Approvals Sales pack Item number MQK-41/300-R MQ-41-R 300 mm Channel: 2 mm, Baseplate: 8 mm 950 g Fire resistance test IBMB 3646/261/07 10 pc MQK-41/450-R MQ-41-R 450 mm Channel: 2 mm, Baseplate: 8 mm 1260 g Fire resistance test IBMB 3646/261/07 10 pc MQK-41/600-R MQ-41-R 600 mm Channel: 2 mm, Baseplate: 8 mm 1570 g Fire resistance test IBMB 3646/261/07 8 pc Systems 543

99 Stainless Steel Parts Channel connector (A4 stainless steel) MQN-R One-piece component for connecting channels and structural elements Universal: one and the same nut for all channels Holds securely once pushed in, turned and tightened Fewer parts and high flexibility Screw: A DIN ISO , Nut: (A4) - DIN EN 10283, Plate: (A4) EN 10088, AISI 316L Approvals Fire resistance test IBMB 3646/261/07 Ordering designation Thread - M Wrench size Approvals Tightening torque Weight Sales pack Item number MQN-R M10 17 mm Fire resistance test IBMB 3646/261/07 40 Nm 77 g 25 pc Wing nut (A4 stainless steel) MQM-R Simple part for connecting channels with structural elements For direct connection to channels In-plane connection to channel possible Allows use in shallow, standard and deep channel profiles Nut: (A4) - DIN EN 10283, Wings: plastic PA Ordering designation Thread - M Tightening torque Weight Sales pack Item number MQM-M6-R M6 10 Nm 29 g 25 pc MQM-M8-R M8 20 Nm 27 g 25 pc MQM-M10-R M10 40 Nm 25 g 25 pc MQM-M12-R M12 40 Nm 23 g 25 pc

100 Stainless Steel Parts Pipe ring saddle (A4 stainless steel) MQA-R Various suspensions with threaded rods Pipe ring saddle for pipe installation One-piece design Easy to use, time-saving Only one type of saddle nut for all MQ channels Nut: (A4) - DIN EN 10283, Plate: (A4) EN 10088, AISI 316L, Plastic: PB Ordering designation Thread - M Approvals Tightening torque Weight Sales pack Item number MQA-M8-R M8 9 Nm 75 g 25 pc MQA-M10-R M10 Fire resistance test IBMB 3646/261/07 18 Nm 73 g 25 pc MQA-M12-R M12 Fire resistance test IBMB 3646/261/07 31 Nm 71 g 25 pc MQA-M16-R M16 Fire resistance test IBMB 3646/261/07 40 Nm 84 g 25 pc Angle (A4 stainless steel) MQW 90 -R Assembly of frames and structures Connection of channels Quick installation Only few parts required for any application Easy to handle Material thickness Stainless steel, (A4) EN 10088, AISI 316L 4 mm Ordering designation Angle Weight Sales pack Item number MQW-2-R g 10 pc MQW-3-R g 10 pc MQW-4-R g 10 pc Angle (A4 stainless steel) MQW 45 /135 -R Assembly of frames and structures Connection of channels Quick installation Only few parts required for any application Material thickness Stainless steel, (A4) EN 10088, AISI 316L 4 mm Systems 545

101 Stainless Steel Parts Ordering designation Angle Weight Sales pack Item number MQW-3/45-R g 20 pc MQW-8/45-R g 10 pc Connector 2-D (A4 stainless steel) MQV-2D-R For clever single-plane channel design Universal: few parts for various applications Easy to use Material thickness Stainless steel, (A4) EN 10088, AISI 316L 4 mm Ordering designation Weight Sales pack Item number MQV-2/2 D-R 440 g 10 pc MQV-3/2 D-R 602 g 10 pc Rail support (A4 stainless steel) MQV-R Connection of channels to any supporting material High application flexibility Reliable and easy to use Material thickness Stainless steel, (A4) EN 10088, AISI 316L 4 mm Ordering designation Tightening torque Weight Sales pack Item number MQV-2/2 D-14-R 40 Nm 440 g 10 pc Rail support (A4 stainless steel) MQP-R Connection of channels to any supporting material High application flexibility Reliable and easy to use Stainless steel, (A4) EN 10088, AISI 316L Ordering designation Weight Approvals Sales pack Item number MQP R 1150 g Fire resistance test IBMB 3646/261/07 12 pc

102 Stainless Steel Parts Ordering designation Weight Approvals Sales pack Item number MQP-82-R 1880 g 8 pc Beam clamp (A4 stainless steel) MQT-R For fastening MQ channels to steel beams without drilling or welding (use only in pairs!) No drilling or welding neccessary Completely pre-assembled and suits all standard T-beams (max. clamping thickness 23 mm) Material thickness Additional product information Stainless steel, (A4) EN 10088, AISI 316L, Nut: A DIN EN ISO mm Beam clamps always to be used in pairs Ordering designation Thread - M Wrench size Tightening torque Weight Sales pack Item number MQT R M10 17 mm 10 Nm 427 g 10 pc MQT R M10 17 mm 20 Nm 471 g 10 pc Drilled plate (A4 stainless steel) MQZ-L-R For wall, ceiling or floor attachment of angles, connectors or brackets For fastening metric threaded parts to MQ channel Matches the MQ channel system perfectly Suitable for MQ installation channels and brackets Stainless steel, (A4) EN 10088, AISI 316L Ordering designation Hole diameter - D Weight Approvals Sales pack Item number MQZ-L9-R 9.5 mm 92 g 20 pc MQZ-L11-R 11.5 mm 88 g Fire resistance test IBMB 3646/261/07 20 pc MQZ-L13-R 13.5 mm 84 g Fire resistance test IBMB 3646/261/07 20 pc Threaded rod (A4 stainless steel) AM Stainless steel A DIN EN ISO Ordering designation Thread - M Length - L Sales pack Item number AM8x1000 A4-70 M mm 10 pc AM8x2000 A4-70 M mm 10 pc AM10x1000 A4-70 M mm 10 pc Systems 547

103 Stainless Steel Parts Ordering designation Thread - M Length - L Sales pack Item number AM10x2000 A4-70 M mm 10 pc AM12x1000 A4-70 M mm 5 pc AM12x3000 A4-70 M mm 5 pc AM16x1000 A4-70 M mm 5 pc AM20x1000 A4-70 M mm 5 pc AM24x1000 A4-70 M mm 5 pc Flat washer DIN 125 (A4 stainless steel) Ordering designation Inside diameter - DI Outside diameter - DA Cross section thickness - s Sales pack Item number A 8,4/16 A4 8.4 mm 16 mm 1.6 mm 50 pc A 10,5/20 A mm 20 mm 2 mm 50 pc A 13/24 A4 13 mm 24 mm 2.5 mm 50 pc A 17/30 A4 17 mm 30 mm 3 mm 25 pc A 21/37 A4 21 mm 37 mm 3 mm 25 pc A 25/44 A4 25 mm 44 mm 4 mm 25 pc Hexagon nut (A4 stainless steel) Stainless steel A4-70 Ordering designation Thread - M Height - H Wrench size - W Sales pack Item number M8 A4-70 M8 7 mm 13 mm 50 pc M10 A4-70 M10 8 mm 17 mm 50 pc M12 A4-70 M12 10 mm 19 mm 50 pc M16 A4-70 M16 13 mm 24 mm 25 pc M20 A4-70 M20 16 mm 30 mm 25 pc M24 A4-70 M24 19 mm 36 mm 25 pc Hexagon bolt (A4 stainless steel) Stainless steel A DIN EN ISO Ordering designation Thread - M Thread length - L Height - H Wrench size - W Sales pack Item number M8x25 A4-70 M8 25 mm 5 mm 13 mm 50 pc M10x20 A4-70 M10 20 mm 6 mm 17 mm 50 pc

104 Stainless Steel Parts Ordering designation Thread - M Thread length - L Height - H Wrench size - W Sales pack Item number M10x25 A4-70 M10 25 mm 6 mm 17 mm 50 pc M12x20 A4-70 M12 20 mm 8 mm 19 mm 50 pc M12x25 A4-70 M12 25 mm 8 mm 19 mm 50 pc Spacer coupling, round (A4 stainless steel) Stainless steel A4-70 Ordering designation Thread - M Length - L Diameter - D Sales pack Item number M8x30 A4-70 round M8 30 mm 11 mm 50 pc M10x30 A4-70 round M10 30 mm 13 mm 25 pc M12x40 A4-70 round M12 40 mm 15 mm 25 pc M16x40 A4-70 round M16 40 mm 25 mm 20 pc Systems 549

105 Heavy-Duty Supports System MI Industrial Pipe and Electrical Supports Hot Dipped Galvanized Hilti. Outperform. Outlast. 550

106 Heavy-Duty Supports Girder MI Provides easy-to-install, adjustable, flexible solution for industrial and heavy commercial applications, eliminating the need for welding Modular system for secondary steel structures such as pipe supports, cable tray supports and platforms Fast and efficient installation Hot-dip galvanized, no need to paint Girder with high torsional rigidity DD11 MOD - HN 555, S235JR - EN Hot-dip galvanized, 75 µm - ASTM A123 Ordering designation Height Length Weight per metre length Sales pack Item number MI-90 6m 90 mm 6 m 9430 g 6 m MI-120 6m 120 mm 6 m g 6 m Connector MIC-U Modular four-part system for supporting cable trays, pipes and miscellaneous secondary steel Provides easy-to-install, adjustable, flexible solutions for industrial and heavy commercial applications, eliminating the need for welding Strong and rigid connection Can be finely adjusted by up to 5 mm Vibration-resistant screw fastenings thanks to self-locking nuts Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW DIN EN 1562, EN-GJMW DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461 Additional product information No cantilever possible, Always support on both sides. Systems 551

Heavy-Duty Supports Ordering designation MI girder type Set Weight Wrench size Tightening torque Sales pack Item number MIC-90-U 90 Yes 2.36 kg 19 mm 84 Nm 4 pc 304803 MIC-120-U 120 Yes 2.

107 Heavy-Duty Supports Ordering designation MI girder type Set Weight Wrench size Tightening torque Sales pack Item number MIC-90-U 90 Yes 2.36 kg 19 mm 84 Nm 4 pc MIC-120-U 120 Yes 2.79 kg 19 mm 84 Nm 4 pc Connector MIC-L Modular four-part system for supporting cable trays, pipes and miscellaneous secondary steel Provides easy-to-install, adjustable, flexible solutions for industrial and heavy commercial applications, eliminating the need for welding Cantilever connections Strong and rigid connection Can be finely adjusted by up to 5 mm Vibration-resistant screw fastenings thanks to self-locking nuts Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW DIN EN 1562, EN-GJMW DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO

108 Heavy-Duty Supports Ordering designation MI girder type Set Weight Wrench size Tightening torque Sales pack Item number MIC-90-L 90 Yes 3.95 kg 19 mm 84 Nm 2 pc Connector MIC-T Supporting cable trays, pipes and miscellaneous secondary steel (MIC-T forms a safe, four-part system) Industrial and heavy commercial applications requiring an easyto-install, adjustable, flexible solution that eliminates the need for welding Positive engagement for optimum transmission of forces and moments Vibration-resistant screw fastenings thanks to self-locking nuts Rigid extension / connection of MI girders Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW DIN EN 1562, EN-GJMW DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461 Additional product information Use in pairs Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-T 90, kg 19 mm 84 Nm 2 pc Systems 553

Heavy-Duty Supports Connector MIC-E Connecting MI girders Fast and efficient installation Positive locking hold for optimum transmission of forces and moments Vibration-resistant screw fastenings

109 Heavy-Duty Supports Connector MIC-E Connecting MI girders Fast and efficient installation Positive locking hold for optimum transmission of forces and moments Vibration-resistant screw fastenings thanks to self-locking nuts Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461 Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-90-E kg 19 mm 84 Nm 2 pc MIC-120-E kg 19 mm 84 Nm 2 pc

Heavy-Duty Supports Connector (steel) MIC-S Modular four-part system for supporting cable trays, pipes and miscellaneous secondary steel Provides easy-to-install, adjustable, flexible solutions for

110 Heavy-Duty Supports Connector (steel) MIC-S Modular four-part system for supporting cable trays, pipes and miscellaneous secondary steel Provides easy-to-install, adjustable, flexible solutions for industrial and heavy commercial applications Fastening to standard steel beams without drilling or welding Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461 Provides a strong and rigid connection Base plates are designed to cover a large range of standard flange widths Adjustable and flexible for efficient and easy installation Ordering designation MI girder type Steel beam width Weight Width - B X Y Tightening torque Sales pack Item number MIC-S90-AA steel mm 4.37 kg 170 mm 84 Nm 2 pc MIC-S90-A steel mm 7.14 kg 280 mm 200 mm 140 mm 84 Nm 2 pc MIC-S90-C steel mm kg 430 mm 350 mm 290 mm 84 Nm 2 pc MIC-S120-A steel mm 7.54 kg 280 mm 200 mm 140 mm 84 Nm 2 pc MIC-S120-B steel mm 8.99 kg 350 mm 300 mm 210 mm 84 Nm 2 pc MIC-S120-C steel mm kg 430 mm 350 mm 290 mm 84 Nm 2 pc Systems 555

111 Heavy-Duty Supports Connector (concrete) MIC-C-AA/-D Modular four-part system for supporting cable trays, pipes and miscellaneous secondary steel Provides easy-to-install, adjustable, flexible solutions for industrial and heavy commercial applications, eliminating the need for welding Easy installation of MI girders between two walls Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461 Concrete connector base plates can be fastened using a variety of Hilti anchors No welding, no downtime Fast and easy installation and extension by one person Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-C90-AA concrete kg 19 mm 84 Nm 2 pc MIC-C90-D concrete kg 19 mm 84 Nm 2 pc MIC-C120-D concrete kg 19 mm 84 Nm 2 pc

Heavy-Duty Supports Connector (concrete) MIC-C-U of MI girders between two walls Fastening to concrete walls, floors or ceilings Light-duty version for non-cantilever structures with support on both

112 Heavy-Duty Supports Connector (concrete) MIC-C-U of MI girders between two walls Fastening to concrete walls, floors or ceilings Light-duty version for non-cantilever structures with support on both sides Oblong holes simplify exact positioning Suitable for use with mechanical or chemical anchors depending on loading and type of supporting material Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461 Additional product information No cantilever possible, Always support on both sides. Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-C90-U concrete kg 19 mm 84 Nm 2 pc Connector MIC-U-MA For supports or corner struts at angles between 0 and 180 Vibration-resistant screw fastenings thanks to self-locking nuts Can be finely adjusted by up to 5 mm Keyed hold for optimum transmission of forces and moments Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW DIN EN 1562, EN-GJMW DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461 Additional product information To be used in pairs Systems 557

Heavy-Duty Supports Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-U-MA 90, 120 2.

113 Heavy-Duty Supports Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-U-MA 90, kg 19 mm 84 Nm 2 pc Connector MIC-CU-MA Connecting girders directly to concrete at angles between 0 and 180 Fastening to concrete/walls Oblong holes simplify exact positioning Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461 Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack Item number MIC-CU-MA concrete 90, kg 19 mm 84 Nm 4 pc U-bolt connector MIC-UB Reliable fastening with U-bolts (not included) Reliable fastening system for use with U-bolts Long slots for precise adjustment of pipe position Keyed hold for optimum transmission of forces Connector, square washer: DD11 MOD - HN 547, S235JR - DIN EN 10025; washer: DIN EN ISO 7089; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector, square washer 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO

114 Heavy-Duty Supports Ordering designation MI girder type Weight Wrench size Sales pack Item number MIC-UB90-M kg 19 mm 6 pc MIC-UB90-M kg 19 mm 10 pc MIC-UB120-M kg 19 mm 10 pc U-bolt MI-UB Provides easy-to-install, adjustable, flexible solutions for industrial and heavy commercial applications, eliminating the need for welding Small contact surface between U-bolt and pipe Minimizes crevice corrosion Complies with the DIN standard for U-bolts U-bolt: DD11 MOD - HN 547, S235JR - DIN EN 10025; nut: 8 grade steel; washer: DIN EN ISO HV HDG: 45 µm - DIN EN ISO 1461 Systems 559

115 Heavy-Duty Supports Ordering designation Nominal pipe size Thread - M Weight Thread length - L Height - H Width - B Sales pack Item number MI-UB 25-M10 25 mm M10 oversized 0.13 kg 50 mm 76 mm 48 mm 20 pc MI-UB 40-M10 40 mm M10 oversized 0.16 kg 50 mm 92 mm 62 mm 20 pc MI-UB 50-M12 50 mm M12 oversized 0.24 kg 50 mm 109 mm 76 mm 20 pc MI-UB 65-M12 65 mm M12 oversized 0.27 kg 50 mm 125 mm 94 mm 10 pc MI-UB 80-M12 80 mm M12 oversized 0.29 kg 50 mm 138 mm 106 mm 10 pc MI-UB 100-M mm M16 oversized 0.64 kg 60 mm 171 mm 136 mm 10 pc MI-UB 125-M mm M16 oversized 0.72 kg 60 mm 191 mm 164 mm 10 pc MI-UB 150-M mm M16 oversized 0.8 kg 60 mm 217 mm 192 mm 5 pc MI-UB 200-M mm M16 oversized 1.01 kg 70 mm 283 mm 244 mm 5 pc MI-UB 250-M mm M16 oversized 1.19 kg 70 mm 334 mm 298 mm 5 pc Easy hand screw MIA-EH Bolt: 8.8 grade steel; toothed plate: EN-GJMW DIN EN 1562, EN- GJMW DIN EN 1562 HDG: 45 µm - DIN EN ISO 1461 Ordering designation MI girder type Length - L Weight Tightening torque Sales pack Item number MIA-EH mm 0.16 kg 84 Nm 10 pc MIA-EH mm 0.19 kg 84 Nm 10 pc One-hand screw MIA-OH Steel grade 8.8 HDG: 45 µm - DIN EN ISO 1461 Ordering designation MI girder type Length - L Weight Tightening torque Sales pack Item number MIA-OH mm 0.1 kg 84 Nm 10 pc MIA-OH mm 0.13 kg 84 Nm 10 pc Backing plate MIA-EH-P Plate: EN-GJMW DIN EN 1562, EN-GJMW DIN EN 1562; spring: AISI 302, DIN EN HDG: 45 µm - DIN EN ISO 1461 Ordering designation MI girder type Weight Sales pack Item number MIA-EH-P 90, kg 10 pc

116 Heavy-Duty Supports Toothed plate MIA-TP EN-GJMW DIN EN 1562, EN- GJMW DIN EN 1562 HDG: 45 µm - DIN EN ISO 1461 Ordering designation MI girder type Weight Sales pack Item number MIA-TP 90, kg 20 pc Prevailing torque hex nut M12-F-SL-WS 3/4 Steel grade 8 HDG: 45 µm - DIN EN ISO 1461 Ordering designation Weight Tightening torque Sales pack Item number M12-F-SL-WS 3/ kg 84 Nm 100 pc Girder end cap MIA-EC For closing the ends of girders Moplen EP 240H With built-in opening to permit drainage of liquids Temperature resistance C Ordering designation MI girder type Weight Sales pack Item number MIA-EC kg 25 pc MIA-EC kg 25 pc Systems 561

Heavy-Duty Supports Beam clamp MI-SGC MI beam clamp for direct connection of MI girder to steel beam For steel beams with flange thicknesses from 3 to 36 mm and angles of up to 15 Corrosion

M Weight Width - B Wrench size Tightening torque Sales pack Item number MI-SGC M12 M12 0.

117 Heavy-Duty Supports Beam clamp MI-SGC MI beam clamp for direct connection of MI girder to steel beam For steel beams with flange thicknesses from 3 to 36 mm and angles of up to 15 Corrosion protection on the steel beam is not damaged by the beam clamp Beam clamp is equipped with set of vibration-resistant washers Additional product information Use in pairs Ordering designation Thread - M Weight Width - B Wrench size Tightening torque Sales pack Item number MI-SGC M12 M kg 30 mm 19 mm 84 Nm 16 pc Beam clamp MI-DGC MI beam clamp for direct connection of MI girder to steel beam For steel beams with flange thicknesses from 3 to 36 mm and angles of up to 15 Corrosion protection on the steel beam is not damaged by the beam clamp Beam clamp is equipped with self-locking nuts Additional product information Clamp: EN-GJMB DIN EN 1562, EN-GJMW DIN EN 1562, EN-GJMW DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8 HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461 Beam clamps always to be used in pairs 562

Heavy-Duty Supports Ordering designation MI girder type Weight Tightening torque Sales pack Item number MI-DGC 90 90 0.

forces and moments Forces and moments are transmitted reliably through positive engagement Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.

118 Heavy-Duty Supports Ordering designation MI girder type Weight Tightening torque Sales pack Item number MI-DGC kg 84 Nm 4 pc MI-DGC kg 84 Nm 4 pc MI/MQ cross connector MIC-MI/MQ-X Direct connection of MQ installation channels to the MI system Keyed hold for optimum transmission of forces and moments Forces and moments are transmitted reliably through positive engagement Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 40 µm - DIN EN ISO Ordering designation MI girder type Weight Tightening torque Sales pack Item number MIC-MI/MQ-X 90, kg 50 Nm 16 pc Connector MIC-MI/MQ M8 Direct connection of MQ installation channels to the MI system Forces and moments are transmitted reliably through positive engagement Keyed hold for optimum transmission of forces and moments Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel HDG: connector 55 µm - DIN EN ISO 1461; bolt 45 µm - DIN EN ISO 1461 Systems 563

Heavy-Duty Supports Ordering designation MI girder type Weight Tightening torque Sales pack Item number MIC-MI/MQ-M8 90, 120 0.

119 Heavy-Duty Supports Ordering designation MI girder type Weight Tightening torque Sales pack Item number MIC-MI/MQ-M8 90, kg 20 Nm 5 pc Elevator part MIC Horizontal divider beam in elevator shafts Fastening the guide rails HDG: 55 µm - DIN EN ISO 1461 Easy installation between two walls Oblong holes simplify exact positioning No welding, no downtime Ordering designation MI girder type Weight Sales pack Item number MIC-U-EL kg 8 pc MIC-90-U-ED kg 2 pc MIC-U-EF 90, kg 8 pc

Ventilation Systems Perforated band hanger MV-SI For the installation of round air ducts to the ceiling Easy to use Fits all folded spiral-seam tube sizes Built-in acoustic insulation piece with

120 Ventilation Systems Perforated band hanger MV-SI For the installation of round air ducts to the ceiling Easy to use Fits all folded spiral-seam tube sizes Built-in acoustic insulation piece with through-hole and preassembled U-washer for M8/M10 threaded rods DD11 steel - DIN EN 10111, EPDM Sendzimir galvanized Temperature resistance C Hardness insulation material 60 ±5 Shore A Noise reduction 18 db (A) Ordering designation Maximum load - F Maximum tensile load - Fz Sales pack Item number MV-SI 600 N 0.6 kn 50 pc Perforated band LB DX51D+Z275-N-A - DIN EN Galvanized Ordering designation Width - B Hole diameter - D Distance between holes - A X Cross section thickness - s Length - L Maximum tensile load - F Sales pack Item number LB mm 5.1 mm 14 mm 7 mm 0.9 mm mm 0.75 kn 10 pc LB mm 7 mm 20 mm 10 mm 1 mm mm 1.2 kn 10 pc LB mm 8.2 mm 26 mm 17.2 mm 1.2 mm mm 2.2 kn 10 pc Systems 565

Ventilation Systems Air duct bracket MVA-LC/-LP For the installation of rectangular air ducts to ceilings Convenient solution for fastening ventilation ducts directly to ceilings, suspended on

121 Ventilation Systems Air duct bracket MVA-LC/-LP For the installation of rectangular air ducts to ceilings Convenient solution for fastening ventilation ducts directly to ceilings, suspended on threaded rods or in conjunction with MQ system for rising ducts Scale for precise alignment and stand-off installation Movable cage allows compensation of dimensional tolerances in the structure and avoidance of rebars during installation DD11 steel - DIN EN 10111, EPDM Galvanized Temperature resistance C Hardness insulation material 40 ±5 Shore A Noise reduction 12 db (A) Approvals Acustic insulaton DIN 4109 inspected Ordering designation Maximum load - F Thread - M Weight Approvals Sales pack Item number MVA-LC N M8, M g Acustic insulaton DIN 4109 inspected 25 pc Air duct bracket MVA-ZC For the installation of rectangular air ducts to ceilings Quick through-fastening for M8/M10 threaded rods Movable cage allows compensation of dimensional tolerances in the structure and avoidance of rebars during installation Can be fitted on MQ installation channel or fastened directly to the supporting material DD11 steel - DIN EN 10111, EPDM Galvanized Temperature resistance C Hardness insulation material 40 ±5 Shore A Noise reduction 12 db (A) Ordering designation Maximum load - F Thread - M Weight Sales pack Item number MVA-ZC 600 N M8, M g 25 pc

Ventilation Systems Heavy air duct bracket MVA-LH For rectangular air ducts in vertical shafts Perfect for heavy loads Convenient solution for bridging the thickness of the insulation (up to 30 mm)

122 Ventilation Systems Heavy air duct bracket MVA-LH For rectangular air ducts in vertical shafts Perfect for heavy loads Convenient solution for bridging the thickness of the insulation (up to 30 mm) Oblong hole allows compensation of tolerances DD11 - DIN EN Galvanized Temperature resistance C Hardness insulation material 60 ±5 Shore A Noise reduction 12 db (A) Approvals Acustic insulaton DIN 4109 inspected Insulation material EPDM rubber Ordering designation Maximum load - F Thread - M Weight Approvals Sales pack Item number MVA-LH 800 N M8, M g Acustic insulaton DIN 4109 inspected 25 pc Systems 567

Installation Systems INSTALLATION SYSTEMS

Installation Systems INSTALLATION SYSTEMS INSTALLATION SYSTEMS 230 MM Channel System MM Channel System Page 230-237 MQ Channel System MQ Channel System Page 237-248 MC Channel System MC Channel System Page 249 Accessories Beam Clamp MAB Page 249