MPS Electrical Test Laboratory, Larsen & Toubro Limited, Mysore Campus, KIADB Industrial Area, Hebbal Hootagalli, Mysore, Karnataka
|
|
- Norma Manning
- 6 years ago
- Views:
Transcription
1 Last Amended on - Page 1 of 6 SOURCE 1. DC VOLTAGE $ 1mV to 10 mv 0.13 % to 0.014% Using Multifunction Calibrator 10 mv to 1 V 0.014% to % By Direct Method 1 v to 10 V % to % 10 V to 100 V % to % 100 V to 1000 V % 2. AC VOLTAGE $ 45 Hz to 10 khz 5 mv to 100 mv 0.16% to 0.027% Using Multifunction Calibrator 100 mv to 1 V 0.027% to 0.025% By Direct Method 1 V to 10 V 0.025% 10 V to 100 V 0.025% to 0.031% 45 Hz to 1 khz 100 V to 1000 V 0.025% to 0.036% 10 khz to 100 khz 10 mv to 300 mv 0.54% to 0.11% 300 mv to 3 V 0.11% to 0.086% 3 V to 100 V 0.086% to 0.29% 3. DC CURRENT $ 10 µa to 100 µa 0.25 % to 0.040% Using Multifunction Calibrator 100 µa to 1 ma % to 0.017% By Direct Method 1 ma to 100 ma 0.017% to 0.015% 100 ma to 1 A %to 0.028% 1 A to 10 A 0.028% to 0.064% 10 A to 20 A 0.064% to 0.35% 20 A to 900 A 1.42% to 0.66% With Current Coil
2 Last Amended on - Page 2 of 6 4. AC CURRENT $ 45 Hz to 1 khz Using Multifunction Calibrator 30 µa to 100 µa 0.56% to 0.26% By Direct Method 100 µa to 3 ma 0.26% to 0.12% 3 ma to 100 ma 0.12 % to 0.078% 100 ma t0 1 A 0.078% to 0.074% 1 A to 10 A 0.074% to 0.14% 10 A to 20 A 014 % to 0.35 % 1 khz to 5 khz 10 ma to 100 ma 0.12% to 0.18% 100 ma to 1A 0.18% to 0.81% 1 A to 10 A 0.81% to 3.50% 50 Hz With Current Coil 20 A to 750 A 0.88% to 0.80% 5. RESISTANCE $ 1Ω to 10 Ω 0.13% to 0.016% Using Multifunction Calibrator 10 Ω to 100 Ω 0.016% to % By Direct Method 100 Ω to 100 k Ω % to % 100 k Ω to 1 M Ω % to % 1 M Ω to 10 M Ω % to 0.016% 10 M Ω to 100 M Ω 0.016% to 0.062% 100 M Ω to 1 G Ω 0.062% to 1.79% 6. CAPACITANCE $ 1 khz Using Multifunction Calibrator 350 pf to 10 nf 3.88% to 0.40% By Direct Method 10 nf to 300 nf 0.40% 100 Hz 1 µf to 100 µf 0.41% to 0.67%
3 Last Amended on - Page 3 of 6 7. FREQUENCY $ 1 Hz to 100 khz % to % Using Multifunction Calibrator 100 khz to 100 MHz % to % By Direct Method 100 MHz to 250 MHz % 8. OSCILLOSCOPE $ 5 mv to 33 V 2.60% to 0.29% Using Multifunction Calibrator DEFLECTION By Direct Method COEFFICIENT/ DC AMPLITUDE DEFLECTION 1 khz Using Multifunction Calibrator COEFFICIENT / 5 mv to 50 V 2.60% to 0.29% By Direct Method AC AMPLITUDE TIME MARKER 5 ns to 5 s % to 0.12% Using Multifunction Calibrator By Direct Method LEVELED DC to 250 MHz 4.89% Using Multifunction Calibrator SINE WAVE By Direct Method (Band Width) MEASURE 1. DC VOLTAGE $ 5 mv to 100 mv 0.086% to % Using Digital Multimeter 6½ 100mV to 10 V % to % By Direct Method 10 V to 1000 V % to % 2. AC VOLTAGE $ 10 Hz to 20 khz Using Fluke 8846 A 6½ DMM 5 mv to 100 mv 1.01% to 0.12% By Direct Method 100 mv to 30 V 0.12% to 0.19% 45 Hz to 1 khz 30 V to 1000 V 0.19% to 0.097%
4 Last Amended on - Page 4 of 6 50 Hz 35 V to 240 V % to % Using COM V to 320 V % to % 50 Hz Using Digital Multimeter 1 kv to 5 kv 1.31% to 0.32% by Direct Method 3. DC CURRENT $ 100 µa to 100 ma 0.088% to 0.064% Using Digital Multimeter 6½ 100 ma to 1 A 0.064% to 0.082% DMM by Direct Method 1 A to 10 A 0.082% to 0.20% 4. AC CURRENT $ 45 Hz to 1 khz Using 6½ DMM 100 µa to 1 ma 0.25% to 0.16% By Direct Method 1 ma to 1 A 0.16% to 0.17% 1 A to 10 A 0.18% to 0.28% 50 Hz 5 ma to 50 ma 0.035% to % Using COM ma to 120 A % to % 5. RESISTANCE $ 1Ω to 10 Ω 0.36% to 0.046% Using Fluke 6½ DMM 10 Ω to 100 Ω 0.046% to 0.016% By Direct Method 100 Ω to 100 k 0.016% to 0.013% 100 k Ω to 1 MΩ 0.013% 1 MΩ to 10 MΩ 0.013% to 0.047% 10 MΩ to 100 MΩ 0.047% to 0.94% 100 MΩ to 1 GΩ 0.94% to 2.32% 6. FREQUENCY $ 1 Hz to 10 Hz % to % Using 10 Hz to 100 Hz % to % Frequency Counter 100 Hz to 300 MHz % to % By Direct Method 300 MHz to 350 MHz % to %
5 Last Amended on - Page 5 of 6 60 V to 240 V Using DMM 45 Hz to 100 Hz By Direct Method 7. AC POWER $ 45 Hz to 65 Hz Using COM 3003 (Cos Ө = ± 0.25 to 1) 40 V to 320 V 0.027% to 0.013% Three & Single Calibration 1Φ ( Active) 10 ma to 120 A 0.2 W to 38.4 kw 0.6 W to kw 10 ma to 120 A Three & Single Calibration (Sin Ө = ± 0.25 to 1) 40 V to 320 V 0.027% to 0.013% Using COM Φ ( Active) 10 ma to 120 A Three & Single Calibration 0.2 VAr to 38.4 kvar 0.6 VAr to kVAr 10 ma to 120 A Three & Single Calibration 8. AC ENERGY $ 45 Hz to 65 Hz Using COM 3003 (Cos Ө = ± 0.25 to 1) 40 V to 320 V 0.027% to 0.013% Three & Single Calibration 1Φ ( Active) 10 ma to 120 A 0.2 Wh to 38.4 kwh 0.6 Wh to kwh 10 ma to 120 A Three & Single Calibration (Sin Ө = ± 0.25 to 1) 40 V to 320 V 0.027% to 0.013% Using COM Φ ( Active) 10 ma to 120 A Three & Single Calibration 0.2 VArh to 38.4 kvar
6 Last Amended on - Page 6 of VArh to 115.2kVAr 10 ma to 120 A Three & Single Calibration 9. IMMUNITY/IMPULSE GENERATORS $ Voltage ±125 V to± 500V 3.30% to 2.04 % Using Tektronixs / TDS 3054 B Amplitude ±500 V to ±12 kv 2.04 % to 3.56 % DPO, Tektronix/P5100/ P6015A HV Probes / KW 50 / Pulse Rise Time 5 ns to 75 ns 3.19 % to 2.06 % KW1000 EFT Attenuators by Direct Method Pulse Width 50 ns 2.34 % Front Time 1.2 µs 2.16% Time to Half Value 50 µs 2.79% Burst Duration 0.8 ms to 15 ms 2.43% to 2.38% Burst Period 300 ms 2.33% Repetition Frequency/Rate 40 Hz to 400 Hz 2.04 % 5 khz to 100 khz 2.32 % to 2.38% Oscillation frequency 100 khz to 1 MHz 2.04 % * Measurement Capability is expressed as an uncertainty ( ) at a confidence probability of 95% $ Only in Permanent Laboratory
Calsytech, # 38 North Mada Street Nandambakkam, Chennai, Tamil Nadu. Discipline Electro-Technical Calibration Issue Date
Last Amended on 23.11.2016 Page 1 of 7 SOURCE 1. DC VOLTAGE $ 1mV to 10 mv 10 mv to100 mv 100 mv to1000 V 0.43% to 0.05% 0.05% to 0.01% 0.01% to 0.004% Calibrator, Calibrator by DC VOLTAGE 1mV to 20 mv
More informationTesting & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra
Last Amended on - Page 1 of 5 SOURCE 1. DC VOLTAGE 1 mv to 32 mv 0.43 % to 0.02 % 32 mv to 32 V 0.02 % to 0.008 % 32 V to 1000 V 0.008 % to 0.02 % 2. DC CURRENT 10 µa to 320 µa 0.15 % to 0.03 % 32 µa to
More informationTechnical Services Department, BHEL, Piplani, Bhopal, Madhya Pradesh. Discipline Electro Technical Calibration Issue Date
Last Amended on 29.02.2016 Page 1 of 6 SOURCE 1. DC VOLTAGE $ 100mV to 220 mv 220 mv to 220 V 220 V to 1000 V 2. AC VOLTAGE $ 50 Hz to 1 khz 3 mv to 220 mv 220 mv to 220 V 220 V to 1000 V 3. DC CURRENT
More informationElectronics Test and Development Centre, STQC Directorate, Agriculture College Campus, Shivajinagar, Pune, Maharashtra
Last Amended on 23.02.2015 Page 1 of 8 SOURCE 1. DC VOLTAGE # 100 V to 1 mv 0.5 % to 0.06 % Using Multi-Function Calibrator 1 mv to 10 mv 0.06 % to 0.007 % by 10 mv to 100 mv 0.007 % to 0.0014 % 100 mv
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ADVANCED TEST EQUIPMENT CORP. 10401 Roselle Street San Diego, CA 92121 Gabriel Alcala Phone: 858 558 6500 CALIBRATION Valid To: April
More informationCalibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 10
Calibration Laboratory Assessment Service CLAS Certificate Number 95-02 Page 1 of 10 400 Britannia Road East, Unit #1 Mississauga, Ontario L4Z 1X9 Contact: Mr. Vince Casali Tel (905) 890-7600, (800) 36FLUKE
More informationCALIBRATION CMC 2, 4 ( )
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ADVANCED TEST EQUIPMENT CORP.. 104011 Roselle Street San Diego, CA 92121 Jill Berg Phone: 858 558 6500 CALIBRATION Valid To: April 30,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Wilmington Instrument Company, Inc. 332 North
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Instrument Company, Inc. 332 North Fries
More informationCalitron Calibration Laboratory, U1: 207, Kohinoor Arcade, Tilak Chowk, Nigdi, Pune, Maharashtra
Calitron Calibration, U1: 207, Kohinoor Arcade, Tilak Chowk, Last Amended on - Page 1 of 7 SOURCE 1. DC Voltage # 1 mv to 200 mv 200 mv to 1000 V 2. DC Current # 100 µa to 200 ma 200 ma to 20 A 20A to
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that TesCom 2600 Longhorn Blvd., Ste. 112 Austin,
More informationDiscipline Electro-Technical Calibration Issue Date Certificate Number C-0556 Valid Until Last Amended on - Page 1 of 7
SAC (ISRO)-TIMCD-Calibration, Space Applications Centre, Last Amended on - Page 1 of 7 SOURCE 1. DC VOLTAGE $ 10 V 4.0 µv Using DC Reference Standard Fluke /734A(732B) 100 mv to 1V 0.66 µv to 4 µv Using
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Palen Kimball, LLC 1717 University Ave. West
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 ACUCAL INC. 600 South 56th Street Chandler, AZ 85226 Thomas Efaw Phone: 480 753 7000 CALIBRATION Valid To: September
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Tra-Cal, LLC 7901 Beechcraft Avenue, Suite
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TRADEPORT ELECTRONICS CALIBRATION LABORATORY 1750 Steeles Ave. West, Suite 5 Concord, Ontario L4K 2L7 CANADA Barry Conway Phone: 905 660 3797 CALIBRATION Valid
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Rothe Development, Inc. Metrology Services
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Contact: Mr N Morgan Tel: +44 (0)1926 812066 Fax: +44
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INSTRUMENTATION DYNATHERM INC. 4127 Rue Cousens Ville St-Laurent, QC Canada H4S 1V6 Graziano Chila Phone: 514 636 7800 CALIBRATION Valid To: May 31, 2018 Certificate
More informationApril 10, 2018 VIA . Gore Laboratories, Inc. Jeff Buechler 10 Northern Blvd., Suite 5 Amherst, NH 03031
April 10, 2018 VIA EMAIL Gore Laboratories, Inc. Jeff Buechler 10 Northern Blvd., Suite 5 Amherst, NH 03031 Re: Extension for ISO/IEC 17025: 2005 accreditation Dear Jeff: This letter is to inform you that
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TEKTRONIX CANADA 400 Britannia Road E, Unit 2 Mississauga, Ontario L4Z 1X9 Canada Andrew Sweeny Phone: 905 241 3021 CALIBRATION Valid
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 4613 Northwest
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Wintronics, Inc. 50 Division Ave Millington,
More informationSOLICITUD XXVI CONGRESO NACIONAL DE METROLOGIA
SOLICITUD XXVI CONGRESO NACIONAL DE METROLOGIA Técnicas para la calibración de medidores analógicos Bill Gaviria Regional Product Manager Direct: +1.425.446.5335 Cell: +1.321.626.7845 Email: bill.gaviria@flukecal.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 YOKOGAWA CORPORATION OF AMERICA 2 Dart Road Newnan, GA 30265 Van Puymbrouck Phone: 770 254 0400 x 5021 CALIBRATION Valid To: December
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that DGI Metrology/Dimensional Gauge Company 2144
More informationFluke 83V and 87V Digital Multimeters
Fluke 83V and 87V Digital Multimeters Detailed Specifications For all detailed specifications: is given as ±([% of reading] + [number of least significant digits]) at 18 C to 28 C, with relative humidity
More informationPresident For the Accreditation Council Certificate Number Valid to January 31, 2010
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY HAYES INSTRUMENT SERVICE, INC. Billerica, MA for technical competence in the field of Calibration This laboratory
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CONNECTICUT CALIBRATION LABS 327 S. Main Street Newtown, CT 06470 Joseph Zeolla Phone: 203 270 1263 CALIBRATION Valid To: October 31,
More informationFor the National Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Intertek Japan K.K. Calibration Laboratory 3-2 Sunayama Kamisu Ibaraki 314-0255 JAPAN Ms. Masako Oyamada Phone: 81-465 89 2316 Fax: 81-465 89 2160 E-mail: masako.oyamada@intertek.com
More informationAnnex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-K-15195-01-02 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.10.2017 to 29.07.2019 Holder of certificate: Rohde
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AMETEK CO., LTD. NAGOYA OFFICE. (Main Laboratory) Onna, Atsugi-shi, Kanagawa-ken, Japan
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AMETEK CO., LTD. NAGOYA OFFICE (Main Laboratory) 5-1-1 Onna, Atsugi-shi, Kanagawa-ken, 243-0032 Japan (Commercial Office) 1-329 Kifune, Meito-ku Nagoya-shi,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 OHTAMA CALIBRATION SERVICE CO., LTD. 2-8-20 Kurigi, Asao-ku, Kawasaki-shi, Kanagawa, 215-0033 Japan Etsuji Nogami (Authorized Representative) Phone: +81 44-819-8660
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 BHD Test & ment 2100 W. 6th Ave. Broomfield, CO 80020 Everett Hedrick Phone: 303 469 5335 CALIBRATION Valid to: May 31, 2019 Certificate
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Caltronix, Inc. 100 Town Centre Drive Rochester,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & Z540.3-2006 INSPEC, INC. 7282 Haggerty Rd Canton, MI 48187 Dale Robenault Phone: 734 451 8740 CALIBRATION Valid To: September 30,
More informationDimensional Up to 25 mm/ mm 2.0 µm 0 mm to 100 mm/ 0.01 mm 7.4 μm 100 mm to 300 mm/ 0.01 mm 10 μm
IAS Accreditation Number Company Name CL-154 Almeer Technical Services Calibration Laboratory Address Plot No. 100/104, Area 7 P.O. Box 9240 Ahmadi, 61003 Kuwait Contact Name Satyananda Rao, Technical
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration, Inc. 1 Industrial
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 TEKTRONIX, INC. 9902 East 43 RD Street Suite D Tulsa, OK 74146 Mark Jackson Phone: 800 438 8165 CALIBRATION Valid To: September 30,
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Diamond Technical Services 11 Depot Street
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Total Solutions, Inc. 7722 Metric Drive Mentor,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 JEL LIMITED 2971 Nakabyo, Abiko-City Chiba-Prefecture, 270-1121, JAPAN Keiichiro Murata Phone: +81 4 7188 5333 Email: murata@jel.co.jp CALIBRATION Valid To:
More informationANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Precision Repair and Calibration 9150 Isanti Street NE Blaine, MN 55449 Jane McDougall
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Caliber Test & ment 2100 W. 6th Ave. Broomfield, CO 80020 Everett Hedrick Phone: 303 469 5335 CALIBRATION Valid to: May 31, 2019 Certificate
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Lockheed Martin Stennis IMC Bldg 5100 Stennis
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Contact: Mr N Morgan Tel: +44 (0)1926 812066 Fax: +44
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Accredited Calibration Services, Inc. (Marsh
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 TESTEQUITY LLC 6100 Condor Drive Moorpark, CA 93021 Ed Yankajtis Phone: 805 498 9933 CALIBRATION Valid To: October
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JM TEST SYSTEMS, INC. 3947 Lincoln Ave., Ste. B Groves, TX 77619 Jerry Kraus Phone: 432 580 7040 CALIBRATION Valid To: February 29,
More informationACLASS Accreditation Services An ANSI-ASQ National Accreditation Board Company
ACLASS Accreditation Services An ANSI-ASQ National Accreditation Board Company SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Oscilloscope Services 7827 Kingsley Houston, TX. 77087 Bill Whitworth Phone:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 TEKTRONIX, INC. 13725 SW Karl Braun Drive Beaverton, OR 97077 Andrew Mumford Phone: 503 627 2476 CALIBRATION Valid to: August 31, 2018
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that ARREGA TECNOLOGIA, SAPI, DE CV/ARREGA INDUSTRIAL
More informationSDM3045X Digital Multimeter. DataSheet
SDM3045X Digital Multimeter DataSheet-2016.06 User-friendly Design Product Overview SDM3045X is a 4½ digit digital (60000 count) multimeter incorporating a dual-display and is especially well suited for
More informationACCREDITED LABORATORY
THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY A2LA has accredited FLUKE ELECTRONICS Carrollton, TX for technical competence in the field of Calibration The accreditation covers
More informationCERTIFICATE OF ACCREDITATION. ANSI/NCSL Z (R2002) and ANSI/NCSL Z (R2013)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration 5909 Breckenridge
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 3000 Northwoods
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Techmaster Electronics, Inc. 46782 Lakeview
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Precision Repair and Calibration 9150 Isanti
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 G.T. MICHELLI COMPANY, INC. 130 Brookhollow Esplanade Harahan, LA 70123 Patrick Jester Phone: 504 733 9822 CALIBRATION Valid To: May
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 SIMCO ELECTRONICS 8203-J Piedmont Triad Parkway Greensboro, NC 27409 Gene Denmark Phone: 336 605 1665 Fax: 336
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 AMETEK CTS US 52 Mayfield Ave Edison, NJ 08837 Mary Jane Salvador Phone: 732 417 0501 E-mail: maryjane.salvador@ametek.com www.teseq.com
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI National Accreditation Board 11617 Coldwater Road, Fort Wayne, IN 46845 USA This is to certify that E2b Calibration, LLC 521 Fifth Avenue Chardon, OH 44024 has been assessed
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CENTURY LABS II dba CENTURY CALIBRATIONS 1929 Lakeview Drive Fort Wayne, Indiana 46808 Robin Bork Phone: 260 471 1673 CALIBRATION Valid
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Unit 3, Watt House Innovation Centre Pensnett Estate Kingswinford West Midlands DY6 7YD Contact: Mr A P Walker Tel: +44 (0)1384 401132 Fax: +44 (0)1384 400754 E-Mail: mail@quasartronics.com Website: www.quasartronics.com
More informationCurrent Clamp. 210
Our range of devices includes clamp meters for measuring current leaks, AC and DC current, voltage, power, resistance, continuity, capacitance or frequency. Some clamp meters have a clearly arranged display
More information8588A Reference Multimeter
8588A Reference Multimeter Product Specifications March 2019 Rev. A 2019 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Arrega Tecnologia, SAPI, de CV/Arrega Industrial
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z540.3
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3 SIMCO ELECTRONICS (Ireland) Limited IDA Business & Technology Park Garrycastle, Dublin Rd Athlone Westmeath, Ireland
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bankhead Industrial Estate Contact: Miss Alexis Ross Bankhead Avenue Tel: +44 (0)1224 710033 Bucksburn Fax: +44 (0)1224 710099 Aberdeen E-Mail:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z & ANSI/NCSL Z540.3
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3 WORLD CAL, INC. 2012 High Street Elk Horn, IA 51531 Michael W. Howard Phone: 712 764 2197 Email: mhoward@liberty-labs.com
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that McCune s Instrument, Inc. 108 North Lee Street
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 INSTRUMENT CALIBRATION SERVICE, INC., A TEST EQUIPMENT REPAIR CORPORATION company 5965 Shiloh Road East Alpharetta, GA 30005 Don Petersen
More informationFluke 5820A Oscilloscope Calibrator Specifications
Fluke 5820A Oscilloscope Calibrator Specifications Voltage Function Volt Function DC Signal Square Wave Signal 1 Load into 50Ω into 1 MΩ into 50Ω into 1 MΩ Amplitude Range 0V to ±6.6V 0V to ±130V ±1 mv
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 HAYES INSTRUMENT SERVICE, INC. 530 Boston Road Billerica, MA 01821 Tony Ganchi Phone: 978 663 4800 CALIBRATION Valid until: January
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 KEYSIGHT TECHNOLOGIES, INC. SERVICE CENTERS 2012 High Street Elk Horn, IA 51531 Brandt Langer Phone: 712 254
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CENTURY LABS II dba CENTURY CALIBRATIONS 1929 Lakeview Drive Fort Wayne, Indiana 46808 Robin Bork Phone: 260 471 1673 CALIBRATION Valid
More informationOscilloscope Calibration Options for 55XX Series Multi-Product Calibrators
Oscilloscope Calibration Options for 55XX Series Multi-Product Calibrators Extended Specifications These specifications apply to the 5520A-SC1100, 5500A- SC600 and 5500A-SC300 Oscilloscope Calibration
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 INSTRUMENT CALIBRATION SOLUTIONS, INC. 413 Hopewell Avenue Aliquippa, PA 15001 Mr. David Beier Phone: 724 846 0136 CALIBRATION Valid
More informationRS Pro DIGITAL MULTI-METER SDM3055 SERIES
ENGLISH Product Datasheet Stock No: 1236465 1236466 RS Pro DIGITAL MULTI-METER SDM3055 SERIES Product Overview RSDM3055 is a digital multimeter designed with 5 ½ digits readings resolution and dual-display,
More informationCalibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 19
Calibration Laboratory Assessment Service CLAS Certificate Number 2000-03 Page 1 of 19 Transmation Canada nc. 916 Gateway Canada L7L 5K7 Contact: Robert Whittaker Tel (905) 632-5869 Toll Free (800) 897-0067
More informationScope of Accreditation For The Calibration Solution Inc. Calibration
Scope of Accreditation For The Solution Inc. 9865 North Alpine Road Machesney Park, IL 61115 Jeff Tratnik 815-877-0880 In recognition of a successful assessment to ISO/IEC 17025:2005 and ANSI/NCSL Z540.1:1994,
More information5520A. Multi-Product Calibrator. Extended Specifications 2005
5520A Multi-Product Calibrator Extended Specifications 2005 5520A Specifications The following tables list the 5520A specifications. All specifications are valid after allowing a warm-up period of 30 minutes,
More information5080A Multi-Product Calibrator
5080A Multi-Product Calibrator Calibration solutions for your analog and digital workload 5080A Multi-Product Calibrator: expanded workload coverage Calibrate analog and digital meters, and much more The
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Pte. Ltd. Blk
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 SIMCO ELECTRONICS - DRAPER, UTAH 65 E. Wadsworth Park Drive Suite 101 Draper, UT 84020 Curtis Keller Phone:
More informationTR CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL DCLF METROLOGY. Approved By: Senior Manager: Mpho Phaloane Revised By:
CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL LF METROLOGY Approved By: Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee Date of Approval: 2015-08-26 Date of
More informationTRACEABLE MEASUREMENT CAPABILITY
PAGE 1 OF 8 DC Voltage Only 0 mv to 200 mv 20 V to 200 V 200 V to 1000 V 1 kv to 30 kv 15 ppm + 3 µv 6 ppm + 2 µv 5 ppm + 3 µv 7 ppm + 50 µv 13 ppm + 250 µv 0.5 % Only 0 mv to 200 mv 20 V to 200 V 200
More information5520A. Multi-Product Calibrator. Extended Specifications
5520A Multi-Product Calibrator Extended Specifications Specifications The following tables list the 5520A specifications. All specifications are valid after allowing a warm-up period of 30 minutes, or
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, CANADA 875, boul. Charest ouest, Suite 100 Quebec, QC, G1N 2C9 CANADA Ghislain Cournoyer, Systems Manufacturer & Services Manager Phone: 418 263 3686 CALIBRATION
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Portland 14058 SW Milton Court Portland,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRO LAB SERVICES, INC. 517 N. Fulton Avenue Evansville, IN 47710 Robert J. Dreier Phone: 812 423 5211 CALIBRATION Valid To: April 30, 2019 Certificate Number:
More informationDeutsche Akkreditierungsstelle GmbH. Scope of Accreditation D-K to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH to DIN EN ISO/IEC 17025:2005 Period of validity: 30.01.2018 to 27.10.2021 Date of issue: 30.01.2018 Certificate bearer: Testo Industrial Services GmbH Gewerbestraße
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 21-23 Campus Road Contact: Mr K G Dove Listerhills Science Park Tel: +44 (0)1274 393857 Bradford Fax: +44 (0)1274 393336 BD7 1HR E-Mail: sales@otc.co.uk
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 INDUSTRIAL PROCESS MEASUREMENT, INC. 3910 Park Avenue, Unit 7 Edison, NJ 08820 Mark Gural Phone: 732 632 6400 www.instrumentation2000.com
More informationOscilloscope Calibration Options for Fluke 5500A/5520A Multi-Product Calibrators
Oscilloscope Calibration Options for Fluke 5500A/5520A Multi-Product Calibrators Extended Specifications November 1999 General Specifications These specifications apply to the 5520A-SC1100, 5500A-SC600
More informationFluke 8845A/8846A Digital Multimeters Extended Specifications
Fluke 8845A/8846A Digital Multimeters Extended Specifications The Fluke 8845A and 8846A 6.5 digit precision multimeters have the precision and versatility to handle your most demanding measurements, on
More information