MATRIX COMBO PLATING SYSTEM. Streamlined set for craniofacial and mandibular trauma and reconstruction
|
|
- Barnaby Benson
- 6 years ago
- Views:
Transcription
1 MATRIX COMBO PLATING SYSTEM Streamlined set for craniofacial and mandibular trauma and reconstruction
2 MATRIXCOMBO PLATING SET MATRIXCOMBO PLATING SET ( ) The aim of surgical fracture treatment is to reconstruct the bony anatomy and restore its function. According to the AO, internal fixation is distinguished by anatomical reconstruction, stable fixation, preservation of blood supply, and early, active mobilization. 1 Plate and screw osteosynthesis has been established and clinically recognized for some time. Mandible Instrument Tray With the AO philosophy at its core, the Matrix plating platform for internal fixation of the craniomaxillofacial skeleton addresses neuro, craniofacial, mandibular, and orthognathic surgery. Matrix is a simple, yet comprehensive, system that offers flexibility and ease of use. The MatrixCOMBO Plating Set is streamlined and organized for the treatment of craniofacial and mandibular trauma and reconstruction. Key implants and instruments from the MatrixMIDFACE and MatrixMANDIBLE Plating Systems are combined in a single graphic case. For specific product information see the respective system technique guide. Note: The MatrixCOMBO Plating Set includes items shown. MatrixMIDFACE Trauma Module MatrixMANDIBLE Trauma Module 1. M.E. Müller, M. Allgöwer, R. Schneider, and H. Willenegger: Manual of Internal Fixation, 3rd Edition. Berlin; Springer-Verlag DePuy Synthes MatrixCOMBO
3 Matrix General Instrument Tray IMF Screw Module Matrix System All screws work with all plates within each Matrix system Reduced plate/screw profile where applicable Improved screw retention and reduced cam-out* Standardized instrumentation Reduced inventory for hospitals without compromising clinical solution Lag Screw Instrument and Implant Module MatrixMANDIBLE Reconstruction Module MatrixCOMBO Facilitates treatment of panfacial fractures Eliminates need to pull separate sets to treat mandible and midface cases Modular system allows set to be configured per surgeon and hospital needs Side-loading graphic case for complete set visibility *Mechanical test data on file at Synthes. MatrixCOMBO DePuy Synthes 1
4 INDICATIONS The Synthes MatrixMIDFACE Plating System is intended for use in selective trauma of the midface and craniofacial skeleton; craniofacial surgery; reconstructive procedures, and selective orthognathic surgery of the maxilla and chin. The Synthes MatrixMANDIBLE Plate and Screw System is intended for oral, maxillofacial surgery: Trauma Reconstructive surgery Orthognathic surgery (surgical correction of dentofacial deformities) Note: Please refer to package insert for full list of indications, contraindications, warnings and precautions. 2 DePuy Synthes MatrixCOMBO
5 MATRIXCOMBO PLATING SET ( ) INSTRUMENT TRAY FOR GENERAL INSTRUMENTS ( ) Finger Mat for use in Mini IMF Screw Module Mini Plate Holder, long In-Plane Bender for MatrixMIDFACE Plates Mesh Cutting Scissors, long nose Plate Bender for Midface Plates, 2 ea Plate Cutter for Midface Plates MatrixMANDIBLE Plate Introducing Forceps Orbital Retractor, left Orbital Retractor, right T-Handle, hex coupling, small mm Threaded Reduction tool, self-tapping, 78 mm, hex coupling mm Drill Guide Plate Holder for Reversible Matrix Plates mm Drill Bit, Stryker J-Latch, 75 mm Screwdriver Handle, with hex coupling, medium, 2 ea Ratcheting Screwdriver Handle, 2 ea mm/2.4 mm Universal Drill Guide Plate Holding Forcep with ball Bone Reduction Forceps, Large Bone Reduction Forceps, Small Bone Reduction Forceps, Small, Straight Mini IMF Screw Module mm IMF Screw, self-drilling, 8 mm, 3 ea mm IMF Screw, self-drilling, 12 mm, 3 ea mm Precut Cerclage Wire, 175 mm, 2 ea mm/3.0 mm Cruciform Screwdriver Blade, hex coupling Holding Sleeve mm Drill Bit, Stryker J-Latch, 8 mm stop, 2 ea mm Drill Bit, Stryker J-Latch, 12 mm stop, 2 ea. For detailed cleaning and sterilization instructions, please refer to: In Canada, the cleaning and sterilization instructions will be provided with the Loaner shipments. MatrixCOMBO DePuy Synthes 3
6 MatrixCOMBO Plating Set ( ) INSTRUMENT TRAY FOR MANDIBLE INSTRUMENTS ( ) Insert Tray for Trocar Instrumentation Insert tray for Plate Bending Irons and Small Plate Benders MatrixMANDIBLE Depth Gauge MatrixMANDIBLE Combination Bender MatrixMANDIBLE Short Cut Plate Cutter, for use with 1.5 mm through 2.8 mm plates, 2 ea. MatrixMANDIBLE Bending Irons Left Right MatrixMANDIBLE Small Plate Cutter, for use with 1.0 mm, 1.25 mm and 1.5 mm plates Plastic Cup with Lid, for Elastomeric Inserts Alternative Options for * Insert Tray for Plate Bending Pliers * Finger Mat *Also available DePuy Synthes MatrixCOMBO
7 Insert Tray for Trocar Instrumentation MatrixMANDIBLE Trocar Drill Guide MatrixMANDIBLE Threaded Trocar Drill Guide MatrixMANDIBLE 1.5 mm Calibrated Drill Bit, J-latch, 125 mm. 2 ea MatrixMANDIBLE 1.8 mm Calibrated Drill Bit, J-latch, 125 mm, 2 ea Universal Trocar Handle mm Cannula and Obturator Malleable C-Retractor mm Cheek Retractor Blade mm Cheek Retractor Ring MatrixCOMBO DePuy Synthes 5
8 MatrixCOMBO Plating Set ( ) MATRIX AUXILIARY MODULE, MEDIUM FOR MATRIXMIDFACE SYSTEM ( )* Screws, Drill Bits, Blades Insert, with recessed holes Orbital Plate and Mesh Insert mm/0.7 mm Plate Insert, half height, 2 ea Plate Insert for MatrixMIDFACE Generic Module Orbital Plate and Mesh Insert Titanium MatrixNEURO Contourable Mesh, 38 mm x 45 mm, 0.4 mm Silver, malleable Blue, rigid Titanium MatrixMIDFACE Orbital Floor Plates, anatomic, 0.3 mm thick, 2 ea Small Medium Large Titanium MatrixMIDFACE Orbital Mesh Plate, 0.3 mm thick, 2 ea Plate Insert for MatrixMIDFACE Generic Module Titanium MatrixMIDFACE Preformed Orbital Plates, 2 ea Small, left Large, left Small, right Large, right * Includes lid 6 DePuy Synthes ame of Product Technique Guide
9 Screws, Drill Bits, Blades Insert, with recessed holes Titanium MatrixMIDFACE Screws, self-drilling Length (mm) Pkgs. of Titanium MatrixMIDFACE Screws, self-tapping Length (mm) Pkgs. of Titanium MatrixMIDFACE Emergency Screws Length (mm) Pkgs. of Matrix 1.1 mm Drill Bits, Stryker J-latch, 2 ea mm stop mm stop mm stop MatrixMIDFACE 1.25 mm Drill Bits, Stryker J-latch, 2 ea mm stop mm stop MatrixMIDFACE Screwdriver Blade, hex coupling, self-retaining, 76 mm, 2 ea. Alternative Option for * Screws, Drill Bits, Blades Insert, with non-recessed holes *Also available MatrixCOMBO DePuy Synthes 7
10 MatrixCOMBO Plating Set ( ) MATRIX AUXILIARY MODULE, MEDIUM, FOR MATRIXMIDFACE SYSTEM ( ) mm/0.7 mm Plate Insert, half height, 2 ea. Titanium MatrixMIDFACE Plates, 0.5 mm thick H-Plate, 11 holes, 2 ea Oblique L-Plate, 2 x 3 holes, left, 3 ea Oblique L-Plate, 2 x 3 holes, right, 3 ea Oblique L-Plate, 3 x 4 holes, left, 3 ea Oblique L-Plate, 3 x 4 holes, right, 3 ea T-Plate, 3 x 4 holes, 2 ea Oblique L-Plate, 4 x 6 holes, left, 3 ea Oblique L-Plate, 4 x 6 holes, right, 3 ea Orbital Rim Plate,12 holes, 3 ea Adaption Plate, 20 holes, 3 ea Y-Plate,1 x 3 holes, 2 ea Double X-Plate, 6 holes, 2 ea Box Plate, 4 holes, 5 x 10 mm, 2 ea Box Plate, 4 holes, 10 x 10 mm, 2 ea X-Plate, 4 holes, 2 ea Strut Plate, 18 holes, 2 ea. Titanium MatrixMIDFACE Plates, 0.7 mm thick H-Plate, 11 holes, 2 ea Oblique L-Plate, 2 x 3 holes, left, 3 ea Oblique L-Plate, 2 x 3 holes, right, 3 ea Oblique L-Plate, 3 x 4 holes, left, 3 ea Oblique L-Plate, 3 x 4 holes, right, 3 ea T-Plate, 3 x 4 holes, 2 ea Oblique L-Plate, 4 x 6 holes, left, 3 ea Oblique L-Plate, 4 x 6 holes, right, 3 ea Orbital Rim Plate,12 holes, 3 ea Adaption Plate, 20 holes, 3 ea Y-Plate, 1 x 3 holes, 2 ea Double Y-Plate, 6 holes, 2 ea Box Plate, 4 holes, 5 mm x 10 mm, 2 ea Box Plate, 4 holes, 10 mm x 10 mm, 2 ea X-Plate, 4 holes, 2 ea Strut Plate, 18 holes, 2 ea. Note: The holds either 0.5 mm thick or 0.7 mm thick MatrixMIDFACE plates. 8 DePuy Synthes MatrixCOMBO
11 ALTERNATIVE OPTIONS FOR * 0.4 mm Plate Insert, half height Titanium MatrixMIDFACE Plates, 0.4 mm thick Orbital Rim Plate, 12 holes Adaption Plate, 20 holes Y-Plate, 1 x 3 holes Double Y-Plate, 6 holes Box Plate, 4 holes, 5 mm x 10 mm Box Plate, 4 holes, 10 mm x 10 mm X-Plate, 4 holes Strut Plate, 18 holes * 0.8 mm Plate Insert, half height Titanium MatrixMIDFACE Plates, 0.8 mm thick H-Plate, 11 holes Oblique L-Plate, 2 x 3 holes, left Oblique L-Plate, 2 x 3 holes, right Oblique L-Plate, 3 x 4 holes, left Oblique L-Plate, 3 x 4 holes, right T-Plate, 3 x 4 holes Oblique L-Plate, 4 x 6 holes, left Oblique L-Plate, 4 x 6 holes, left Adaption Plate, 20 holes Orbital Rim Plate, 12 holes *Also available MatrixCOMBO DePuy Synthes 9
12 MatrixCOMBO Plating Set ( ) MATRIXMANDIBLE TRAUMA MODULE ( )* Small Plate Insert for 1.0 mm Malleable MatrixMANDIBLE Plates Insert Tray for 1.0 mm MatrixMANDIBLE Plates Insert Tray for 1.25 mm MatrixMANDIBLE Plates Insert Tray for 1.5 mm MatrixMANDIBLE Plates Insert Tray for 2.0 mm MatrixMANDIBLE Plates Matrix Auxiliary Insert Tray, Medium Generic MatrixMANDIBLE Screw Insert Tray, for 2.0 mm, 2.4 mm and 2.9 mm screws Small Plate Insert for 1.0 mm Malleable MatrixMANDIBLE Plates Titanium MatrixMANDIBLE Plates, malleable, 1.0 mm thick, 2 ea x 2 Hole Mini Plate, tension band, narrow x 3 Hole Mini Plate, tension band, narrow Hole Box Plate Hole Strut Plate Hole Strut Plate, curved, mini x 2 Hole Mini Plate, tension band, broad x 3 Hole Mini Plate, tension band, broad x 3 Hole Mini Plate, tension band, broad Insert Tray for 1.0 mm MatrixMANDIBLE Plates Titanium MatrixMANDIBLE Plates, 1.0 mm thick, 2 ea x 2 Hole Mini Plate, tension band, narrow x 3 Hole Mini Plate, tension band, narrow Hole Adaption Plate Hole Adaption Plate Pre-Bent Tension Band Plate, right, 2 x 2 holes Pre-Bent Tension Band Plate, left, 2 x 2 holes * Includes lid 10 DePuy Synthes MatrixCOMBO
13 Insert Tray for 1.25 mm MatrixMANDIBLE Plates Titanium MatrixMANDIBLE Plates, 1.25 mm thick, 2 ea x 2 Hole DCP Plate x 2 Hole Crescent Plate x 3 Hole DCP Plate x 3 Hole Crescent DCP Plate X 3 Hole Angle DCP Plate Hole Plate Insert Tray for 1.5 mm MatrixMANDIBLE Plates Titanium MatrixMANDIBLE Plates, 1.5 mm thick, 2 ea Hole Plate x 3 Hole Plate Hole Plate Hole Plate x 3 Hole Angle Plate x 3 Hole Crescent Plate x 2 Hole DCP Plate x 3 Hole DCP Plate Insert Tray for 2.0 mm MatrixMANDIBLE Plates Titanium MatrixMANDIBLE Plates, 2.0 mm thick, 2 ea x 2 Hole Crescent Plate, broad x 3 Hole Crescent Plate, broad Hole Plate Hole Plate Hole Plate x 3 Hole Angle Plate, broad Matrix Auxiliary Insert Tray, medium Alternative options for , , , * Auxiliary Insert Tray, small (not shown) *Also available MatrixCOMBO DePuy Synthes 11
14 MatrixCOMBO Plating Set ( ) MATRIXMANDIBLE TRAUMA MODULE ( ) Generic MatrixMANDIBLE Screw Insert Tray, for 2.0 mm, 2.4 mm and 2.9 mm screws Holds up to 240 screws (including 40 emergency screws 2.0 mm Titanium MatrixMANDIBLE Screws, self-tapping Length (mm) Pkgs. of mm Titanium MatrixMANDIBLE Locking Screws, self-tapping Length (mm) Pkgs. of mm Titanium MatrixMANDIBLE Screws, self-tapping* Length (mm) Pkgs. of * 2.4 mm screw is the emergency screw for a 2.0 mm screw. 12 DePuy Synthes MatrixCOMBO
15 2.4 mm Titanium MatrixMANDIBLE Locking Screws, self-tapping Length (mm) Pkgs. of mm Titanium MatrixMANDIBLE Emergency Screws, self-tapping Length (mm) Pkgs. of MatrixMANDIBLE 1.5 mm Drill Bits J-latch, 50 mm, 2 ea mm stop mm stop mm stop mm stop MatrixMANDIBLE 1.5 mm Drill Bit, J-latch, 90 mm, for , 2 ea MatrixMANDIBLE 1.8 mm Drill Bit, J-latch, 90 mm, for mm Threaded Drill Guide, short mm Threaded Drill Guide, short MatrixMANDIBLE/THORAX Self-Retaining Screwdriver Blade, long, 2 ea. MatrixCOMBO DePuy Synthes 13
16 MatrixCOMBO Plating Set ( ) MATRIXMANDIBLE MODULES AND TRAYS Auxiliary Module, small Insert for 2.0 mm, 2.5 mm and 2.8 mm MatrixMANDIBLE Reconstruction Plates Titanium MatrixMANDIBLE Plates, 2.5 mm thick, 2 ea Hole Reconstruction Hole Reconstruction x 23 Hole Angle Reconstruction Plate, left x 23 Hole Angle Reconstruction Plate, right Bending Insert Holder Holds up to 16 bending inserts MatrixMANDIBLE Bending Insert, 8 ea Lag Screw Module mm/3.0 mm Cruciform Screwdriver Blade, hex coupling Holding Sleeve Lag Screw Cannula Lag Screw Pointer mm Insert Drill Guide mm Drill Guide 2.4 mm Titanium Cortex Screws, self-tapping, 2 ea. Length (mm) Length (mm) E E E E E E E E E E E mm Drill Bit, Stryker J-latch, 100 mm, 2 ea mm Drill Bit, Stryker J-latch, 125 mm, 2 ea mm Drill Bit, Stryker J-latch, 125 mm, 2 ea Countersink with centering pins, for 2.4 mm screws, hex coupling 14 DePuy Synthes MatrixCOMBO
17 SET ALSO INCLUDES MatrixMANDIBLE Bending Templates for Narrow Tension Band Plates for 1.0 mm Broad Tension Band Plates for 1.0 mm Adaption Plates for 1.25 mm Straight Plates for 1.25 mm 2 x 2 Hole Crescent Plates for 1.25 mm 3 x 3 Hole Crescent Plates for 1.25 mm Angle Plates for 1.25 mm Adaption Plates for 1.5 mm Straight Plates for 1.5 mm 3 x 3 Hole Straight Plates for 1.5 mm 3 x 3 Hole Angle Plates for 1.5 mm 6 Hole Crescent Plates for 1.5 mm Broad 2 x 2/3 x 3 Hole Plates for 2.0 mm Broad Crescent Plates for 2.0 mm Straight Plates for 2.0 mm Broad 3 x 3 Hole Angle Plates for 2.5 mm/2.8 mm Straight Reconstruction Plates for 2.5 mm/2.8 mm Angle Reconstruction Plates MatrixCOMBO DePuy Synthes 15
18 ALSO AVAILABLE MatrixMIDFACE Bending Templates for Orbital Floor Plate, anatomic, small for Orbital Floor Plate, anatomic, medium for Orbital Floor Plate, anatomic, large for Orbital Mesh Plates for Adaption Plates for Orbital Rim Plates for Oblique L-Plates, 2 x 3 holes for Oblique L-Plates, 3 x 4 holes for Oblique L-Plates, 4 x 6 holes for Y-Plates, 1 x 3 holes for X-Plates for H-Plates for T-Plates for Box Plates, 5 mm x 10 mm for Box Plates, 10 mm x 10 mm for Strut Plates for Silver Double Y-Plates for Blue Double Y-Plates for Pink Double Y-Plates MatrixMIDFACE Screwdriver Blades Self-retaining, hex coupling, 52 mm Self-retaining, hex coupling, 96 mm with Spring Holding Sleeve, short, hex coupling, 79 mm with Spring Holding Sleeve, long, hex coupling, 95 mm Titanium MatrixMIDFACE Adaption Plates holes, 0.4 mm thick holes, 0.4 mm thick holes, 0.5 mm thick holes, 0.5 mm thick holes, 0.7 mm thick holes, 0.7 mm thick holes, 0.8 mm thick holes, 0.8 mm thick MatrixMANDIBLE Screws mm Titanium MatrixMANDIBLE Screw, self-tapping, 18 mm mm Titanium MatrixMANDIBLE Locking Screw, self-tapping, 18 mm mm Titanium MatrixMANDIBLE Screw, self-tapping, 18 mm mm Titanium MatrixMANDIBLE Emergency Screw, self-tapping, 18 mm mm Titanium MatrixMANDIBLE Locking Screw, self-tapping, 18 mm Screwdriver Handles, hex coupling locking, medium small large MatrixMANDIBLE/THORAX Screwdriver Fixed Handle, self-retaining Graphic Case Components Graphic Case for MatrixCOMBO Set (includes lid) Lid for MatrixCOMBO Set Lid for Matrix Auxiliary Module, Large, for MatrixMANDIBLE System Lid for Matrix Auxiliary Module, Medium, for MatrixMIDFACE System Lid for Instrument Tray, Medium, for MatrixMANDIBLE System Holder for Calibrated Drill Bits, for MatrixMANDIBLE System * Please refer to MatrixMANDIBLE and MatrixMIDFACE brochures for additional product availability. 16 DePuy Synthes MatrixCOMBO
19 Label Sheets for MatrixMANDIBLE System for Small Plate Module for Large Plate Module for Instrument Tray ( ) for Instrument Tray ( ) for Trocar Instrument Module ( ) Strength Gradient Label Sheet for IMF Module for Lag Screw Module for Screw Module for Small Plate Insert Screw Length Label Sheet for Calibrated Drill Bits Screw Length Markers W 3 mm self-drilling mm W 4 mm self-drilling mm W 5 mm self-drilling mm W 6 mm self-drilling mm W 8 mm self-drilling mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Label Sheets for MatrixMIDFACE System for MatrixNEURO Module for Drill Bits and Screwdriver Blades for Small Auxiliary Module ( ) for 0.4 mm Plates for 0.5 mm Plates for Screws for 0.7 mm Plates for 0.8 mm Plates for Orbital Plates for Preformed Orbital Plates for MatrixMIDFACE and MatrixOrthognathic Strength Gradients Plate Holder for 1.0 mm 2.0 mm Plates EPI MatrixCOMBO Plating Set Implants EPA MatrixCOMBO Plating Set Instruments and Cases MatrixCOMBO Plating Set Midface and Mandible Trauma Mandible Reconstruction Module for MatrixCOMBO Plating Set Lag Screw Module for MatrixMANDIBLE Plating System Mini IMF Module for MatrixMANDIBLE Plating System Compact IMF Module for MatrixMANDIBLE Plating System MatrixCOMBO DePuy Synthes
20 Limited Warranty and Disclaimer: DePuy Synthes CMF products are sold with a limited warranty to the original purchaser against defects in workmanship and materials. Any other express or implied warranties, including warranties of merchantability or fitness, are hereby disclaimed. WARNING: In the USA, this product has labeling limitations. See package insert for complete information. CAUTION: USA Law restricts these devices to sale by or on the order of a physician. Not all products are currently available in all markets. DePuy Synthes CMF 1302 Wrights Lane East West Chester, PA Telephone: (610) To order: (800) Synthes (Canada) Ltd Meadowpine Boulevard Mississauga, Ontario L5N 6P9 Telephone: (905) To order: (800) Fax: (905) DePuy Synthes CMF, a division of DOI All rights reserved. J10015-C 6/13 DS Studio
MatrixMANDIBLE Preformed Reconstruction Plates. Preshaped to the mandibular anatomy.
MatrixMANDIBLE Preformed Reconstruction Plates. Preshaped to the mandibular anatomy. Technique Guide CMF Matrix Table of Contents Introduction MatrixMANDIBLE Preformed Reconstruction Plates 2 AO Principles
More informationTitanium Modular Hand System. For fractures, replantations and reconstruction of the hand.
Titanium Modular Hand System. For fractures, replantations and reconstruction of the hand. Plates precontoured for anatomic fit Instruments colorcoded for easy recognition Modules for 1.0 mm to 2.4 mm
More information1.5 MM LCP SYSTEM. For treatment of fractures and arthrodeses of canines and felines SURGICAL TECHNIQUE
1.5 MM LCP SYSTEM For treatment of fractures and arthrodeses of canines and felines SURGICAL TECHNIQUE TABLE OF CONTENTS INTRODUCTION 1.5 mm LCP System 2 AO Principles 4 SURGICAL TECHNIQUE Reduce Fracture
More informationLag Screw Device TECHNIQUE GUIDE. Indicated for symphyseal fracture fixation of the mandible. Instruments and implants approved by the AO Foundation
Lag Screw Device TECHNIQUE GUIDE Indicated for symphyseal fracture fixation of the mandible Instruments and implants approved by the AO Foundation Lag Screw Device Indicated for symphyseal fracture fixation
More informationMatrixMANDIBLE. Mandible Plating System.
MatrixMANDIBLE. Mandible Plating System. Surgical Technique EXPERT CMF Nailing Matrix System This publication is not intended for distribution in the USA. Instruments and implants approved by the AO Foundation.
More informationFor the Reduction of Displaced Craniofacial Fractures. Threaded Reduction Tools and T-Handle
For the Reduction of Displaced Craniofacial Fractures Threaded Reduction Tools and T-Handle Threaded Reduction Tools and T-Handle 2.4 mm (self-drilling) and 3.5 mm (self-tapping) Threaded Reduction Tools
More informationPart of the DePuy Synthes Cannulated Screw System. 3.5 mm Cannulated Screws
Part of the DePuy Synthes Cannulated Screw System 3.5 mm Cannulated Screws Surgical Technique Table of Contents Introduction 3.5 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique
More informationTechnique Guide. 4.5 mm Cannulated Screws. Part of the Synthes Cannulated Screw System.
Technique Guide 4.5 mm Cannulated Screws. Part of the Synthes Cannulated Screw System. TableofContents Introduction 4.5 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique Surgical
More information3.5 MM low-profile cortex screws
3.5 MM low-profile cortex screws Low-profle fxation option compatible with all Trauma 3.5 mm plates MechanicallY comparable To DEPUY SYNTHES TRAUMA standard 3.5 MM cortex screws low-profile option To MiniMiZe
More information7.0 mm Cannulated Screws
Part of the DePuy Synthes Cannulated Screw System 7.0 mm Cannulated Screws Surgical Technique Table of Contents Introduction 7.0 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique
More informationTechnique Guide. Quadrilateral Surface Plates 3.5. Part of the Low Profile Pelvic System 3.5.
Technique Guide Quadrilateral Surface Plates 3.5. Part of the Low Profile Pelvic System 3.5. Table of Contents Introduction Quadrilateral Surface Plates 3.5 2 AO Principles 4 Indications 5 Surgical Technique
More informationACLP Anterior Cervical Locking Plate System TECHNIQUE GUIDE
ACLP Anterior Cervical Locking Plate System TECHNIQUE GUIDE Instruments and implants approved by the AO Foundation ACLP Anterior Cervical Locking Plate System The ACLP System is designed to reduce the
More informationTechnique Guide. 7.0 mm Cannulated Screws. Part of the Synthes Cannulated Screw System.
Technique Guide 7.0 mm Cannulated Screws. Part of the Synthes Cannulated Screw System. Table of Contents Introduction 7.0 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique Surgical
More information3.5 mm/ 2.7 mm LCP. PanCarPaL arthrodesis S PLate. BroCHUre. For treatment of carpal joints in dogs
3.5 mm/ 2.7 mm LCP PanCarPaL arpal arthrodesis S PLate For treatment of carpal joints in dogs BroCHUre PLate DeSIGn the DePuy Synthes Vet 3.5 mm/2.7 mm LCP Pancarpal arthrodesis plate is intended for the
More information3.5 mm/2.7 mm LCP. Pancarpal Arthrodesis Plate. For treatment of carpal joints in dogs
3.5 mm/2.7 mm LCP Pancarpal Arthrodesis Plate For treatment of carpal joints in dogs Plate Design The DePuy Synthes Vet 3.5 mm/2.7 mm LCP Pancarpal Arthrodesis plate is intended for the treatment of hyperextension
More informationFor Minimally Invasive Application of Cerclage Wires. Cerclage Passer. Surgical Technique
For Minimally Invasive Application of Cerclage Wires Cerclage Passer Surgical Technique Table of Contents Introduction Cerclage Passer 2 Surgical Technique Preparation 4 Insert Cerclage Passer 5 Connect
More informationInstruments for Removing DePuy Synthes Screws. Screw Removal Set
Instruments for Removing DePuy Synthes Screws Screw Removal Set Surgical Technique Table of Contents Introduction Screw Removal Set 2 Surgical Technique Preoperative Planning and Preparation 6 Removal
More information6.5 mm and 7.3 mm Cannulated Screws Technique Guide
6.5 mm and 7.3 mm Cannulated Screws Technique Guide An Integral Part of the SYNTHES Cannulated Screw System Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF
More informationTechnique Guide. Modular Sternal Cable System. Flexibility and strength in sternal closure and repair.
Technique Guide Modular Sternal Cable System. Flexibility and strength in sternal closure and repair. Table of Contents Introduction Modular Sternal Cable System 2 Indications 4 Modular Sternal Closure
More informationCSLP Variable Angle. For Use with the Cervical Spine Locking Plate System TECHNIQUE GUIDE. Self-drilling Screw. Variable Screw Angulation
CSLP Variable Angle For Use with the Cervical Spine Locking Plate System TECHNIQUE GUIDE Self-drilling Screw Variable Screw Angulation Original Instruments and Implants of the Association for the Study
More informationScrew Removal Set
R 105.971 Screw Removal Set 105.971 Screw Removal Set 690.372 Screw Removal Set Graphic Case............................................ 1 ea. Instruments 309.035 Hollow Reamer, complete, for 3.5 mm Cortex,
More information2.4 mm and 3.0 mm Headless Compression Screws
For Fixation of Small Bones and Small Bone Fragments 2.4 mm and 3.0 mm Headless s Surgical Technique Table of Contents Introduction 2.4 mm and 3.0 mm Headless 2 Technique Overview 4 AO Principles 5 Indications
More informationTechnique Chart. DHS/DCS One-Step Insertion Wrench. For use with DHS/DCS One-Step Lag Screws.
Technique Chart DHS/DCS One-Step Insertion Wrench. For use with DHS/DCS One-Step Lag Screws. DHS/DCS One-Step Insertion Wrench DHS Triple Reamer (338.13) Assembly 338.10 8.0 mm Drill Bit 338.11 DHS Reaming
More informationSmall Fragment Locking Compression Plate (LCP ) System Stainless Steel and Titanium TECHNIQUE GUIDE
Small Fragment Locking Compression Plate (LCP ) System Stainless Steel and Titanium TECHNIQUE GUIDE R Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF Introduction
More informationACCS Anterior Cervical Compression System TECHNIQUE GUIDE
ACCS Anterior Cervical Compression System TECHNIQUE GUIDE Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF ACCS Anterior Cervical Compression System The Anterior
More information3.5 mm Cannulated Screw Technique Guide
3.5 mm Cannulated Screw Technique Guide An Integral Part of the SYNTHES Cannulated Screw System Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF The 3.5 mm
More informationVariable Angle LCP Mesh Plate 2.4/2.7. Part of the Variable Angle LCP Forefoot/Midfoot System 2.4/2.7.
Variable Angle LCP Mesh Plate 2.4/2.7. Part of the Variable Angle LCP Forefoot/Midfoot System 2.4/2.7. Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants
More informationTechnique Guide. Occipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput.
Technique Guide Occipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput. Table of Contents Introduction Overview 2 AO ASIF Principles 4 Indications and Contraindications
More informationInstructions for Use. LCP Locking Compression Plate. Combine without Compromise.
Instructions for Use LCP Locking Compression Plate. Combine without Compromise. Table of Contents LCP: Combine without Compromise 2 AO ASIF Principles of Osteosynthesis 4 Indications and Contraindications
More informationOPERATIVE TECHNIQUE RIVAL REDUCE FRACTURE PLATING SYSTEM. foot & ankle trauma procedures
OPERATIVE TECHNIQUE RIVAL REDUCE FRACTURE PLATING SYSTEM foot & ankle trauma procedures INTRODUCTION 3 SYSTEM DESCRIPTION 3 TECHNICAL DETAILS 4 SALES AND MARKETING CONFIGURATION 5 OPERATIVE TECHNIQUE 7
More informationVARIABLE ANGLE LOCKING HAND SYSTEM
VARIABLE ANGLE LOCKING HAND SYSTEM For fragment-specific fracture fixation with variable angle locking and locking technology SURGICAL TECHNIQUE TABLE OF CONTENTS INTRODUCTION Variable Angle Locking Hand
More informationTechnique Guide. 2.4/2.7 mm Locking Tarsal Plates. Talus Plate, Navicular Plate and Cuboid Plate.
Technique Guide 2.4/2.7 mm Locking Tarsal Plates. Talus Plate, Navicular Plate and Cuboid Plate. Table of Contents Introduction 2.4/2.7 mm Locking Tarsal Plates 2 AO Principles 4 Indications 5 Clinical
More informationThe Percutaneous Reduction Forceps Technique Guide
The Percutaneous Reduction Forceps Technique Guide Indications + Product Overview Introduction The Percutaneous Reduction Forceps The Percutaneous Reduction Forceps facilitate standard technique for fixation
More informationLCP Pilon Plate 2.7/3.5. Surgical Technique
LCP Pilon Plate 2.7/3.5 Surgical Technique Image intensifier control This description alone does not provide sufficient background for direct use of DePuy Synthes products. Instruction by a surgeon experienced
More informationVARIABLE ANGLE LOCKING HAND SYSTEM
VARIABLE ANGLE LOCKING HAND SYSTEM For fragment-specific fracture fixation with variable angle locking and locking technology Instruments and implants approved by the AO Foundation. This publication is
More informationLorenz Plating System LactoSorb Resorbable Fixation. Anticipate. Innovate ṬM
Lorenz Plating System LactoSorb Resorbable Fixation Anticipate. Innovate ṬM LactoSorb SE The Proven Leader In Resorbable Technology A Thoroughly Proven Product Anticipation and innovation. These two qualities
More informationEX NAIL INSTRUMENTATION
EX NAIL INSTRUMENTATION PRODUCT OVERVIEW OPENING INSTRUMENTS Awl Description Cannulated to accommodate a 3.0 mm Ball Tipped Reaming Rod 03.037.008 8.0 mm Cannulated Curved Awl Wire Guide Accessory Removable
More informationVariable Angle LCP Tarsal Plates 2.4/2.7. Navicular Plate and Cuboid Plates.
Variable Angle LCP Tarsal Plates 2.4/2.7. Navicular Plate and Cuboid Plates. Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by the AO
More informationVectra, Vectra-T and Vectra-One. Anterior cervical plating for spinal fusion.
Vectra, Vectra-T and Vectra-One. Anterior cervical plating for spinal fusion. Technique Guide Instruments and implants approved by the AO Foundation Table of Contents Introduction Vectra, Vectra-T and
More informationCerclage Passer. For minimally invasive application of cerclage cables.
Cerclage Passer. For minimally invasive application of cerclage cables. Handling Technique Cable application This publication is not intended for distribution in the USA. Instruments and implants approved
More informationLCP Pilon Plate 2.7/3.5
LCP Pilon Plate 2.7/3.5 Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by the AO Foundation. Table of contents Indications 2 Implants
More informationURS Degen. Top loading pedicle screw system for posterior stabilization.
URS Degen. Top loading pedicle screw system for posterior stabilization. Technique Guide This publication is not intended for distribution in the USA. Table of Contents Introduction URS Degen 2 AO Principles
More information3.5 mm and 4.5 mm Curved Locking Compression Plates (LCP )
For Minimally Invasive Osteosynthesis 3.5 mm and 4.5 mm Curved Locking Compression Plates (LCP ) Surgical Technique Table of Contents Introduction 3.5 mm and 4.5 mm Curved Locking Compression 2 Plates
More information90 SCREWDRIVER Minimally invasive drilling and screw insertion
90 SCREWDRIVER Minimally invasive drilling and screw insertion This publication is not intended for distribution in the USA. SURGICAL TECHNIQUE This description alone does not provide sufficient background
More informationIntegra. Stainless Headed Compression Screw System SURGICAL TECHNIQUE
Integra Stainless Headed Compression Screw System SURGICAL TECHNIQUE Table of Contents Design Rationale...2 Indications...2 Contraindications...2 Surgical Technique Step 1: Inserting Guide Wire... 3 Step
More informationRight-Angled Drilling and Screw Insertion. 90 Screwdriver. Surgical Technique
Right-Angled Drilling and Screw Insertion 90 Screwdriver Surgical Technique 90 Screwdriver The DePuy Synthes 90 Screwdriver consists of a screwdriver handle, shaft, screw holder, screwholder insert and
More informationTechnique Guide. Modular Sternal Cable System. Flexibility and strength in sternal closure and repair.
Technique Guide Modular Sternal Cable System. Flexibility and strength in sternal closure and repair. Table of Contents Introduction Overview 2 Indications and Contraindications 3 Surgical Technique A.
More informationCannulated Percutaneous Guiding System. For percutaneous placement of 3.5 mm pelvic and cortex screws in the pelvic area.
Cannulated Percutaneous Guiding System. For percutaneous placement of 3.5 mm pelvic and cortex screws in the pelvic area. Technique Guide This publication is not intended for distribution in the USA. Instruments
More informationTechnique Guide. Cable System. For Orthopaedic Trauma Surgery.
Technique Guide Cable System. For Orthopaedic Trauma Surgery. Table of Contents Introduction Overview 2 AO Principles 4 Indications and Contraindications 5 Surgical Technique Standard Cerclage Technique
More informationContents. How to Use Selecting Plate Configuration Plate Handling Drilling Pilot Hole Plate Fixation
System Contents How to Use Selecting Plate Configuration Plate Handling Drilling Pilot Hole Plate Fixation 5 11 7 9 Bone Screws Micro Screws Mid Screws Mini Screws Auto Screws Maxi Screws Mini Locking
More informationCable System. For Orthopaedic Trauma Surgery.
Cable System. For Orthopaedic Trauma Surgery. Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by the AO Foundation. Image intensifier
More informationSynapse System. An enhanced set of instruments and implants for posterior stabilization of the upper spine.
Synapse System. An enhanced set of instruments and implants for posterior stabilization of the upper spine. Technique Guide 100º Instruments and implants approved by the AO Foundation Table of Contents
More informationDLS Dynamic Locking Screw. Combined with LCP Locking Compression Plate.
DLS Dynamic Locking Screw. Combined with LCP Locking Compression Plate. Instructions for Use Discontinued June 2016 DSEM/TRM/0517/0844(1) Table of Contents Introduction DLS Dynamic Locking Screw 2 Indications
More informationVLP FOOT Variable Angle Locked Plating System
Surgical Technique VLP FOOT Variable Angle Locked Plating System Surgical Technique Table of Contents Product overview Implant selection...2 Introduction...3 System overview...4 Indications...4 Design
More informationVariAxFibula. Fibula Fractures. Locking Plate System. Operative Technique
Foot and Ankle VariAxFibula Locking Plate System Operative Technique Fibula Fractures Distal Fibula Fracture Repair Polyaxial Locking Technology Low Profile Design VariAx Fibula Locking Plate System Contributing
More informationLCP Pilon Plate 2.7/3.5
Surgical Technique LCP Locking Compression Plate Original Instruments and Implants of the Association for the Study of Internal Fixation AO/ASIF Table of contents Indications 3 Implants 4 Instruments 5
More informationOPERATIVE TECHNIQUE RIVAL BITE HEADED CANNULATED AND HEADLESS COMPRESSION SCREWS. foot & ankle applications
OPERATIVE TECHNIQUE RIVAL BITE HEADED CANNULATED AND HEADLESS COMPRESSION SCREWS foot & ankle applications INTRODUCTION 3 SYSTEM DESCRIPTION 3 TECHNICAL DETAILS 4 SALES AND MARKETING CONFIGURATION 6 OPERATIVE
More informationVariable Angle LCP Forefoot/Midfoot System 2.4/2.7. Procedure specific plates for osteotomies, arthrodeses and fractures of the foot.
Instruction for Use Variable Angle LCP Forefoot/Midfoot System 2.4/2.7. Procedure specific plates for osteotomies, arthrodeses and fractures of the foot. Table of Contents Introduction VA-LCP Forefoot/Midfoot
More informationSURGICAL TECHNIQUE GUIDE
SURGICAL TECHNIQUE GUIDE DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if
More informationTechnique Guide. LCP Dynamic Helical Hip System (DHHS). Part of the Synthes Large Fragment LCP System.
Technique Guide LCP Dynamic Helical Hip System (DHHS). Part of the Synthes Large Fragment LCP System. Table of Contents Introduction LCP Dynamic Helical Hip System (DHHS) 2 AO Principles 4 Indications
More informationInstruments for removing Synthes screws. Screw Extraction Set. Handling Technique
Instruments for removing Synthes screws Screw Extraction Set Handling Technique Image intensifier control This description alone does not provide sufficient background for direct use of DePuy Synthes products.
More informationPangea Degenerative Spine System. Top Loading Preassembled Pedicle Screw System for Posterior Stabilization of the Thoracolumbar Spine.
Technique Guide Pangea Degenerative Spine System. Top Loading Preassembled Pedicle Screw System for Posterior Stabilization of the Thoracolumbar Spine. Contents Introduction AO ASIF Principles 4 Indications
More informationVeterinary Product Catalog. Implants Instruments Sets
Veterinary Product Catalog Implants Sets Historical Background Before 1937, the treatment of fractures in large and small animals was confined mainly to casts and splints. Between this period and the mid-1960s,
More informationVariAx Fibula Locking Plate System
VariAx Fibula Locking Plate System Operative Technique Distal Fibula Fracture Repair Polyaxial Locking Technology Low Profile Design 1 Contributing Surgeon: Bradley R. Merk, MD Associate Professor of Orthopaedic
More informationOCCIPITO-CERVICAL FUSION SYSTEM Implants and instruments designed to optimize fixation to the occiput
OCCIPITO-CERVICAL FUSION SYSTEM Implants and instruments designed to optimize fixation to the occiput Instruments and implants approved by the AO Foundation. This publication is not intended for distribution
More informationOccipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput.
Occipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput. Technique Guide This publication is not intended for distribution in the USA. Instruments and implants
More informationVariAx Foot Locking Plate System
VariAx Foot Locking Plate System Operative Technique Trauma and Deformity Correction Polyaxial Locking Technology Comprehensive Calcaneal Fracture Plates Table of Contents 1. Introduction 3 2. Overview
More informationTable of Contents 2-6. Introduction. Indications Surgical Technique. Ordering Information 15-24
Table of Contents Introduction Product information ExtremiFix Midsize Large Screw Offering Headless Screw Characteristics Design Features & Benefits Instrumentation Technical Details Calibrated Drill Bits
More informationInion OTPS. Hand System. Including biodegradable plates, screws and pins. Inion OTPS Hand System. Biodegradable Fixation System
Including biodegradable plates, screws and pins Inion OTPS Hand System Inion OTPS Hand System Biodegradable Fixation System Predictable degradation Optimized implant strength/material ratio Biodegradable
More informationTechnique Guide. LCP Pilon Plate 2.7/3.5
Technique Guide LCP Pilon Plate 2.7/3.5 LCP Pilon Plate 2.7/3.5 Table of contents Indications 3 Implants 4 Instruments 5 Surgical technique 6 Implant removal 12 Image intensifier control Warning This
More informationOPERATIVE TECHNIQUE RIVAL VIEW PLATING SYSTEM. foot & ankle reconstruction procedures
OPERATIVE TECHNIQUE RIVAL VIEW PLATING SYSTEM foot & ankle reconstruction procedures INTRODUCTION 3 SYSTEM DESCRIPTION 3 TECHNICAL DETAILS 4 SALES AND MARKETING CONFIGURATION 5 OPERATIVE TECHNIQUE 7 OPERATIVE
More informationIntegra. Tibio Talo Calcaneus Plate SURGICAL TECHNIQUE
Integra Tibio Talo Calcaneus Plate SURGICAL TECHNIQUE Table of Contents Indications...02 Contraindications...02 Description...02 Surgical Technique...03 Step 1: Articular Surfaces Preparation...03 Step
More informationOperative Technique Distal Fibula Fracture Repair Polyaxial Locking Technology Low Profile Design
VariAx Fibula Locking Plate System Operative Technique Distal Fibula Fracture Repair Polyaxial Locking Technology Low Profile Design Contributing Surgeon: Bradley R. Merk, MD Associate Professor of Orthopaedic
More informationAesculap Spine S 4 Spinal System. Instrumentation Guide
Aesculap Spine S 4 Spinal System Instrumentation Guide S 4 Spinal System S 4 From initial conception, the S 4 Spinal System was developed to meet the spine surgeon s need for an extremely low profile and
More informationIntegra. Capture Screw System SURGICAL TECHNIQUE
Integra Capture Screw System SURGICAL TECHNIQUE Table of Contents Indications... 2 Contraindications... 2 System Description... 2 System Features... 2 Cannulated Low-Profile Screws (AC-Series) Overview...
More informationOccipito-Cervical Fusion System
Implants and Instruments designed to enhance Fixation to the Occiput Occipito-Cervical Fusion System Surgical Technique Image intensifier control This description alone does not provide sufficient background
More informationMINI INSTRUMENTS & IMPLANTS
Page 1 MINI INSTRUMENTS & IMPLANTS Page 2 JACOB CHUCK DRILL BITS MIS-001 1.1MM 45MM LENGTH MIS-002 1.5MM 70MM LENGTH MIS-003 2.0MM 85MM LENGTH MIS-004 2.7MM 85MM LENGTH QUICK COUPLING DRILL BITS MIS-005
More informationTechnique Guide. Synapse System. An enhanced set of instruments and implants for posterior stabilization of the cervical and upper thoracic spine.
Technique Guide Synapse System. An enhanced set of instruments and implants for posterior stabilization of the cervical and upper thoracic spine. Table of Contents Introduction Synapse System 2 AO Principles
More informationVECTRA SURGICAL TECHNIQUE. Anterior cervical plate system. This publication is not intended for distribution in the USA.
VECTRA Anterior cervical plate system This publication is not intended for distribution in the USA. SURGICAL TECHNIQUE Image intensifier control This description alone does not provide sufficient background
More informationSmall Plate and Screw System SURGICAL TECHNIQUE
MINI MAXLOCK EXTREME Small Plate and Screw System SURGICAL TECHNIQUE Contents Key Design Features 2 Surgical Technique 3 Implants and Instruments 9 Proper surgical procedures and techniques are the responsibility
More informationVECTRA. SURGICAL TECHNIQUE. Anterior cervical plate system. This publication is not intended for distribution in the USA.
VECTRA. Anterior cervical plate system. This publication is not intended for distribution in the USA. SURGICAL TECHNIQUE Contents Indications and contraindications Implants Vario Case Instruments Surgical
More informationXia 3 Reference Guide. Version 3-August 2015
Xia 3 Reference Guide Xia 3 Reference Guide Version 3-August 2015 Table of Contents Implants 03 Blocker 03 Monoaxial Screws 04 Polyaxial Screws 05 Uniplanar Screws 06 Iliac Bolts 07 Rod-to-Rod Connectors
More informationReflex Hybrid System Overview
Spine Reflex Hybrid System Overview Anterior Cervical Plating System Introduction The Reflex Hybrid ACP System offers a low-profile anterior cervical plate along with a selection of bone screw types to
More informationSYnaPSe oct SYSteM. An enhanced set of instruments and implants for posterior stabilization of the upper spine
SYnaPSe oct SYSteM An enhanced set of instruments and implants for posterior stabilization of the upper spine SurgIcal technique Table of Contents Introduction SYNAPSE OCT System 2 AO Principles 5 Indications
More informationHCS 1.5. The countersinkable compression screw.
HCS 1.5. The countersinkable compression screw. Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by the AO Foundation. Table of Contents
More informationDistal Radius System 2.5
SURGICAL TECHNIQUE STEP BY STEP Distal Radius System 2.5 APTUS Wrist 2 Distal Radius System 2.5 Contents 3 Introduction 3 Product Materials 3 Indications 3 Contraindications 3 Color Coding 3 Possible Combination
More informationVariAx DistalFibula. Foot & Ankle. Locking Plate System. Operative Technique
VariAx DistalFibula Locking Plate System Operative Technique Foot & Ankle Distal Fibula Fracture Repair Polyaxial Locking Technology Low Profile Design VariAx 2 Color Coded Screws and Instruments VariAx
More information2.4 mm Cannulated Screw. An integral part of the Synthes Cannulated Screw System (CSS).
2.4 mm Cannulated Screw. An integral part of the Synthes Cannulated Screw System (CSS). Surgical Technique This publication is not intended f distribution in the USA. and implants approved by the AO Foundation.
More informationDistal Medial Tibia Plate Surgical Technique
Locking Compression Technology by aap 1 Disclaimer This surgical technique is exclusively intended for medical professionals, especially physicians, and therefore may not be regarded as a source of information
More informationMTP Fusion Surgical Technique
MTP Fusion Surgical Technique Patent and Patent Pending CAUTION: Federal Law (USA) restricts this device to sale by or on the order of a physician. INDICATIONS FOR USE The Omni Foot Plating System is intended
More informationALLGEMEINE INSTRUMENTE FÜR KNOCHENCHIRURGIE GENERAL INSTRUMENTS FOR BONE SURGERY INSTRUMENTAL GENERAL
42-09-0009 3 Jaw Chuck Adaptor, Jacobs to quick coupling, incl. Wrench 42-09-0010 3 Jaw Chuck Adaptor, Jacobs to Quagrangular, incl. Wrench 42-09-0011 3 Jaw Chuck Adaptor, 3 Jaw to Quadrangular, incl.
More informationCETRA ANTERIOR CERVICAL PLATE
CETRA TM ANTERIOR CERVICAL PLATE The CETRA Anterior Cervical Plate System offers a low profile titanium alloy plate with an intuitive locking mechanism, large graft windows, a high degree of screw angulation
More informationDistal Volar Radius Plate Procedure Steps.
Distal Volar Radius Plate Procedure Steps www.carbo-fix.com Introduction The CarboFix Implants The CarboFix Distal Volar Radius Plates are made of numerous continues carbon fibers embedded in polymer (PEEK).
More informationAnterior Cervical Plate SURGICAL TECHNIQUE GUIDE. Surgeon Driven Innovation
Anterior Cervical Plate SURGICAL TECHNIQUE GUIDE Surgeon Driven Innovation 1 The Snowmass Anterior Cervical Plate System is intended for the surgical treatment and correction of traumatic and pathologic
More informationFibula Plating System
ANATOMIC LOCKED PLATING SYSTEM Fibula Plating System Securing optimal fixation through versatile locked and compression plating technology Contents Surgeon Design Team 2 Introduction 3 Anatomic Fibula
More informationLocking Small Fragment
Locking Small Fragment Page 1 Locking Small Fragment Table of contents Implants 5 Operation technique 7 Inserting drill guides 7 Drilling 7 Length measurement 7 Inserting the measured screw 8 Different
More informationMTP Set SURGICAL TECHNIQUE
MINI MAXLOCK EXTREME MTP Set SURGICAL TECHNIQUE Contents Table of Contents Key Design Features 3 Surgical Technique Standard MTP Plate 4 MTP Plate with POCKETLOCK Technology 10 Implants and Instruments
More informationAscent. Posterior Occipital Cervico-Thoracic (POCT) System
Ascent Posterior Occipital Cervico-Thoracic (POCT) System Ascent Posterior Occipital Cervico-Thoracic (POCT) System VERSATILITY, RELIABILITY AND SIMPLICITY FOR COMPLEX SPINAL PROCEDURES The Ascent POCT
More informationDART-FIRE. Small Screw System SURGICAL TECHNIQUE
DART-FIRE Small Screw System SURGICAL TECHNIQUE DART-FIRE Small Screw System SURGICAL TECHNIQUE Contents Chapter 1 4 Chapter 2 6 Appendix 1 9 Appendix 2 11 Introduction DART-FIRE Small Screw System Surgical
More informationAviator Anterior Cervical Plating System System Overview. Visual and tactile confirmation Increased Angulation Simplified instrumentation
Aviator Anterior Cervical Plating System System Overview Visual and tactile confirmation Increased Angulation Simplified instrumentation The Aviator anterior cervical plating system offers a unique double
More information