ALLGEMEINE INSTRUMENTE FÜR KNOCHENCHIRURGIE GENERAL INSTRUMENTS FOR BONE SURGERY INSTRUMENTAL GENERAL

Transcription

1 Jaw Chuck Adaptor, Jacobs to quick coupling, incl. Wrench Jaw Chuck Adaptor, Jacobs to Quagrangular, incl. Wrench Jaw Chuck Adaptor, 3 Jaw to Quadrangular, incl. Wrench Jaw Chuck Adaptor, 3 Jaw to Quick Coupling, incl. Wrench Jaw Chuck Adaptor, 3 Jaw to "Borchardt", incl. Wrench Jaw Chuck Stainless, mm Jacobs 3 Jaw Chuck Stainless, mm Adaptor for Jacobs Chuck to Quick Coupling.101

2 Drill Bits and Tap Handles complete Jacobs Chuck Wrench for Jacobs Chuck Tap Handle for Jacobs Chuck T-Handle Tap Handle for AO-Shaft Tap Handle for Dental Shaft Tap Handle for AO Shaft Tap Handle for quick coupling for flexible reamers.102

3 Instruments for Screw Fixation Countersinks For preparing the seat of the screw head For Mini-Screws Ø 1.5 mm and Ø 2.0 mm Tip Ø 1.1 mm For Small Screws Ø 2.7 mm, Ø 3.5 mm and Ø 4.0 mm Tip Ø 2.0 mm For Malleolar Screws Tip Ø 3.2 mm For large Screws Ø 4.5 mm and Ø 6.5 mm Tip Ø 4.5 mm Depth Gauge for Mini Screws Depth Gauge for Small Screws Depth Gauge for Large Screws Screw Forceps Sharp Hook for checking alignment of fracture ends and removing ingrown tissue in screw head.103

4 for hexagonal Head 1.5 mm 20 cm length 2.5 mm 20 cm length 3.5 mm 20 cm length for Philips Head 20 cm length for Single Head 20 cm length cm for slotted Head 20 cm length A Screwdriver Williams for Philips Head B Screwdriver Williams for Slotted Head C Screwdriver Williams for Single Head D Screwdriver Williams for Hexagonal Head 3.5 mm.104

5 Holding Sleeve Ø 1.5 mm Holding Sleeve Ø 2.5 mm Screwdriver for Mini Screws Screwdriver Screwdriver shaft 2.5 mm Screwdriver shaft 3.5 mm Screwdriver shaft 1.5 mm KARDANVERLÄNGERUNG LANG CARDAN JOINT LONG KLINGEN-ADAPTER MIT T-GRIFF T-HANDLE FOR INSERTS SCHRAUBENDEHERGRIFF SCREW DRIVER HANDLE KLINGE SW / Blade A/F 2,5MM KLINGE SW / Blade A/F 3,0MM KLINGE SW / Blade A/F 3,5MM KLINGE SW / Blade A/F 4,0MM KLINGE SW / Blade A/F 4,5MM KLINGE SW / Blade A/F 5,0MM KLINGE Einschlitz / Blade single slot KLINGE Phillips gross / Phillips large KLINGE Phillips klein / Phillips small.105

6 Mini Drill Sleeve Drill Bit Ø 1.1 mm and Ø 1.5 mm Drill Guide and Drill Sleeve Ø 2.0 mm with 3 and 1 hole respectively Drill Bit Ø 2.0 mm Tap Sleeve Ø 3.5 mm Drill Sleeve Ø 2.5 mm for Drill Bit and Tap for 3.5 mm Cortex Screws with fine thread Tap Sleeve Ø 3.5 mm for Taps Ø 3.5 mm and Ø 2.7 mm May also be used as a Guide for Ø 3.2 mm Drill Bits Pointed Drill Guide.106

7 Instruments for Screw Fixation Tap Sleeve Ø 4.5 mm for Taps Ø 6.5 mm. May also be used as a Drill Guide for Ø 4.5 mm Drill Bits The notched tip prevents slipping on the bone. Use Sleeve Ø 8 mm in the screw holes of plates Drill Guides for Round-Hole Plates, for Drill Bit Ø 3.2 mm Standard, 40 mm Neutral and Load Drill Guide, 2.0 mm for 2.0 mm screws. Use Drill Bit Ø 1.5 mm Neutral and Load Drill Guide, 2.7 mm for 2.7 mm screws. Use Drill Bit Ø 2.0 mm Neutral and Load Drill Guide, 3.5/1.25 mm for 3.5 mm Cortex Screws with fine thread. Use Drill Bit Ø 2.5 mm Neutral Load Drill Guide, 4.5 mm for 4.5 mm screws. Use Drill Bit Ø 3.2 mm Insert Drill Sleeve / 2.0 mm for 2.7 mm Cortex Lag Screws. Use Drill Bit Ø 2.0 mm Insert Drill Sleeve / 2.5 mm for 3.5 mm Cortex Lag Screws. Use Drill Bit Ø 2.5 mm Insert Drill Sleeve / 3.2 mm for 3.5 mm Cortex Lag Screws with fine thread. Use Drill Bit Ø 3.2 mm C-Clamp Drill Guide with thread for Drill Bit Ø 4.5 mm.107

8 DLP Hip Drill Guide, 60 mm. Use Drill Bit Ø 3.2 mm Drill Guide for Round Holes Plate, 60 mm long for hip operations. Use Drill Bit Ø 3.2 mm Triple Drill Guide Angle 130 for all 130 angled plates. Use Drill Bit Ø 3.2 mm Impactor Chisel Guide Condylar Plate Guide Reamer with end for quick coupling.108

9 Slotted Hammer Inserter / Extractor Seating Chisel for preparing blade channel for Adult Angled Plates with U-profile. Shaft and Blade width 16 mm Quadrangular Positioning Plate 110 / 90 / 90 / Triangular Positioning Plate 100 / 60 / Triangular Positioning Plate 80 / 70 / Triangular Positioning Plate 90 / 50 /

10 Seating Chisel 11 mm Seating Chisel 7 mm Inserter for Adolescent and Child Hip Plates Positioning Plates Triangular for children 90 / 50 / Triangular for children 80 / 70 / Triangular for children 100 / 60 / Quadrangular for children 110 / 90 / 90 /

11 Drill Guide for Ø 4.5 mm screws Drill Bit Ø 4.5 mm and Ø 3.2 mm Drill Guide for Ø 6.5 mm screws Drill Bit Ø 3.2 mm Drill Guide 3.5 mm for neutral and compression positioning, Drill Ø 2.5 mm Drill Guide Drill Guide 4.5 / 3.2 mm with 2 inserts.111

12 Bending Instruments for Plates cm Bending Iron for 3.5 mm Reconstruction Plates for 2.7 mm Reconstruction Plates Bending Iron for Mini- and Finger Plates Bending Pliers for 1.5 and 2.0 mm Plates Bending Pliers 24 cm, for 2.7 and 3.5 mm Plates Bending Pliers.112

13 Bending Instruments for Plates Bending Iron for Standard Plates 4 mm and 6 mm Bending Pliers for straight Plates Plate Bending Press.113

14 Socket Wrench width across flats 11 mm (not to be used to apply tension) Drill Sleeve for Tension Device for Drill Bit Ø 3.2 mm Combination Wrench width across flats 11 mm for Tension Device, External Fixator, Medullary Nailing Instruments etc mm Screw Type Compression Device Pin Wrench for Tension Device and Distractor Articulated Tension Device with indicator, span 20 mm. May also be used for distraction of Standard and Small Plates.114

15 42-T T-0112 General Instrument Set Aluminium Case Trays (2) Hohmann Retractors Blade width 8 mm, short narrow tip Blade width 18 mm, short narrow tip Blade width 18 mm, short narrow tip for Hip Surgery Blade width 24 mm, long, wide tip for Hip Surgery Wrench for Chisel Handle Periosteal Elevators Medium straight blade, straight edge, width 14 mm Medium curved blade, round edge, width 14 mm Small, curved blade, round edge, width 6 mm Hammer 500 gramms Chisel Handle, synthetic, autoclavable Chisel Blades 1 ea: 10, 16 and 25 mm Gouge, straight, width 10 mm for Cancellous Bone Grafts.115

16 Standard Bone Forceps Set 42-T T-0112 Standard Bone Forceps Set Aluminium Case Trays (2) Self Centering Bone Holding Forceps, size 1, 240 mm long Self Centering Bone Holding Forceps, size 2, 260 mm long Self Centering Bone Holding Forceps, size 3, 280 mm long Reduction Forceps, large, 240 mm long Reduction Forceps, small, 160 mm long Reduction Forcepswith points, 200 mm long.116

17 Self centering Bone Holding Forceps with Thread Lock For small Fragments 150 mm, jaw 9 mm Size 0, 190 mm, extra small jaw 10 mm Size 1, 240 mm, small jaw 14 mm Size 2, 260 mm, medium jaw 18 mm Forceps with ratchet fixation 145 mm Size 3, 280 mm,large jaw 23 mm Reduction Forceps with Thread Lock 240 mm Reduction Forceps with Thread Lock 160 mm mm, 7".117

18 Reil Forceps 170 mm Reduction Forceps with points 200 mm For Fingers, with Drill guide for Kirschner Wires up to Ø 1.0 mm, 150 mm Malleolar Forceps.118

19 Regular Forceps modified Reposition Forceps Repositioning Forceps 23 cm.119

20 Bone Holding Forceps Ulrich 23 cm, 9" Ulrich 25 cm, 10" Ulrich 28 cm, 11" Ulrich mini 19 cm, 7½" Ulrich 26 cm Ulrich 19 cm Charnley Bone Forceps Set includes: Hooked Jaws: 1 pair Serrated Jaws: 3 pairs sizes 32, 51 and 57 mm.120

21 Ed. 07/ width 8 mm, short, narrow tip Small, width 6 mm, short, narrow tip Small, width 8 mm, short, narrow tip For Small Fragments with broad shank cm, width 18 mm, tip 4 mm width 18 mm, long, narrow tip, for Hip Surgery width 43 mm width 70 mm, narrow tip width 43 mm, long shank, angled.121

22 width 22 mm, wide tip long, wide tip, for Hip Surgery, width 24 mm BENETT mm mm 24 cm, 9½" LANGE-HOHMANN A= 11 mm, B= 30 mm 26.5 cm, 10½" A= 12 mm, B= 33 mm 29 cm, 11½" BLOUNT Retractor for Knee, 27 cm, 10½" Retractor for Knee, 17.5 cm, 6¾".122

23 Periosteal elevators with synthetic handle, autoclavable Medium straight blade, round edge, width 14 mm Medium curved blade, round edge, width 14 mm Large straight blade, round edge, width 20 mm Medium curved blade, round edge, width 13 mm Small curved blade, round edge, width 6 mm Small curved blade, straight edge, width 6 mm Extra small curved blade, straight edge, width 3 mm Small straight blade, straight edge, width 6 mm.123

24 spare screw Chisel Blade mm mm mm mm mm 16 mm 25 mm 5 mm Wrench for Chisel Blade P Chisel Handle PPSU mm, 5" 4 mm 6 mm 8 mm 10 mm 12 mm 15 mm cm, 6¼" 4 mm 6 mm 8 mm 10 mm 12 mm 15 mm 20 mm MINI-LAMBOTTE.124

25 Gouge for removing broken screws, 220 mm, 8¾" ZIELKE mm mm Gouge for scoliosis operations, 230 mm, 9" Chisel Gouge Gouges mm mm mm 25 cm, 10", straight mm mm mm 25 cm, 10", curved LEXER (FLAT) mm mm mm mm mm mm 22 cm, 8¾" LEXER (HOLLOW) mm mm mm mm mm mm 22 cm, 8¾".125

26

27 GIPSSCHEREN PLASTER SCISSORS CIZALLAS PARA VENDAJES ENYESADOS CISEAUX A PLATRE Ed /2012 gezahnt serrated dentadas dentelés gezahnt serrated dentadas dentelés WALTON cm, 8" ESMARCH cm, 8" ASAL cm, 5¾" 17 cm, 6½" glatt smooth liso lisse gezahnt serrated dentadas dentelés BRUNS cm, 9½" BRUNS cm, 9½" UNIVERSAL BANDAGE cm, 7"

28 42.10 Ed /2012 GIPSINSTRUMENTE PLASTER INSTRUMENTS INSTRUMENTOS PARA VENDAJES INSTRUMENTS A PLATRE Messer mit verstärktem Rücken with reinforced back hoja con espalda reforzada lame à dos renforcé STILLE cm, 9" 26 cm, 10¼" 38 cm, 15" STILLE cm, 10½" HOPKINS cm, 8" ESMARCH cm, 7" REINER cm, 7¼" ENGEL cm, 6¼" WIGMORE cm, 7½"

29 GIPSINSTRUMENTE PLASTER INSTRUMENTS INSTRUMENTOS PARA VENDAJES INSTRUMENTS A PLATRE Ed /2012 BERGMANN cm, 7" MASON cm, 7" WOLFF cm, 7" 24 cm, 9½" BEESON cm, 12" USA cm, 9" HENNING cm, 10¾"