SN54HC165, SN74HC165 8-BIT PARALLEL-LOAD SHIFT REGISTERS
|
|
- Olivia Ellis
- 6 years ago
- Views:
Transcription
1 N5465, N465 8-BIT PAAE-OAD IFT EGITE 16C DECEMBE 1982 EVIED MAY 199 Complementary Outputs Direct Overriding oad (Data) Inputs Gated Clock Inputs Parallel-to-erial Data Conversion Package Options Include Plastic mall-outline (D), Thin hrink mall-outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and tandard Plastic (N) and Ceramic (J) 300-mil DIPs description N J O W PACKAGE N D, N, O PW PACKAGE (TOP VIEW) /D CK E F G Q GND V CC CK IN D C B A E Q The 65 are 8-bit parallel-load shift registers that, when clocked, shift the data toward a serial (Q ) output. Parallel-in access to each stage is provided by eight individual direct data (A ) inputs that are enabled by a low level at the shift/load (/D) input. The 65 also feature a clock-inhibit (CK IN) function and a complementary serial (Q ) output. Clocking is accomplished by a low-to-high transition of the clock (CK) input while /D is held high and CK IN is held low. The functions of CK and CK IN are interchangeable. ince a low CK and a low-to-high transition of CK IN also accomplish clocking, CK IN should be changed to the high level only while CK is high. Parallel loading is inhibited when /D is held high. While /D is low, the parallel inputs to the register are enabled independently of the levels of the CK, CK IN, or serial (E) inputs. The N5465 is characterized for operation over the full military temperature range of 55 C to 125 C. The N465 is characterized for operation from 40 C to 85 C. FUNCTION TABE INPUT FUNCTION /D CK CK IN X X Parallel load X No change X No change hift hift E F NC G hift = content of each internal register shifts toward serial output Q. Data at E is shifted into the first register. N FK PACKAGE (TOP VIEW) CK /D NC Q V CC E CK IN Q GND NC NC No internal connection D C NC B A Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright 199, Texas Instruments Incorporated POT OFFICE BOX DAA, TEXA
2 N5465, N465 8-BIT PAAE-OAD IFT EGITE 16C DECEMBE 1982 EVIED MAY 199 logic symbol /D CK IN CK G8 [OAD] 1 C2/ E A B C D E F G D 9 Q Q This symbol is in accordance with ANI/IEEE td and IEC Publication Pin numbers shown are for the D, J, N, PW, and W packages. logic diagram (positive logic) /D 1 A B C D E F G CK IN CK Q E 10 Q Pin numbers shown are for the D, J, N, PW, and W packages. 2 POT OFFICE BOX DAA, TEXA 5265
3 N5465, N465 8-BIT PAAE-OAD IFT EGITE 16C DECEMBE 1982 EVIED MAY 199 typical shift, load, and inhibit sequence CK CK IN E /D A B C Data Inputs D E F G Q Q oad Inhibit erial hift absolute maximum ratings over operating free-air temperature range upply voltage range, V CC V to V Input clamp current, I IK (V I < 0 or V I > V CC ) (see Note 1) ±20 ma Output clamp current, I OK (V O < 0 or V O > V CC ) (see Note 1) ±20 ma Continuous output current, I O (V O = 0 to V CC ) ±25 ma Continuous current through V CC or GND ±50 ma Package thermal impedance, θ JA (see Note 2): D package C/W N package C/W PW package C/W torage temperature range, T stg C to 150 C tresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JED 51, except for through-hole packages, which use a trace length of zero. POT OFFICE BOX DAA, TEXA
4 N5465, N465 8-BIT PAAE-OAD IFT EGITE 16C DECEMBE 1982 EVIED MAY 199 recommended operating conditions N5465 N465 MIN NOM MAX MIN NOM MAX upply voltage V = 2 V VI igh-level input voltage = 4.5 V V = 6 V = 2 V VI ow-level input voltage = 4.5 V V = 6 V VI Input voltage 0 0 V VO Output voltage 0 0 V = 2 V tt t Input transition (rise and fall) time = 4.5 V ns = 6 V TA Operating free-air temperature C If this device is used in the threshold region (from VImax = 0.5 V to VImin = 1.5 V), there is a potential to go into the wrong state from induced grounding, causing double clocking. Operating with the inputs at tt = 1000 ns and = 2 V does not damage the device; however, functionally, the CK inputs are not ensured while in the shift, count, or toggle operating modes. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PAAMETE TET CONDITION VO VI I = VI or VI VO VI I = VI or VI TA = 25 C N5465 N465 MIN TYP MAX MIN MAX MIN MAX 2 V IO = 20 µa 4.5 V V V IO = 4 ma 4.5 V IO = 5.2 ma 6 V V IO = 20 µa 4.5 V V V IO = 4 ma 4.5 V IO = 5.2 ma 6 V II VI = or 0 6 V ±0.1 ±100 ±1000 ±1000 na ICC VI = or 0, IO = 0 6 V µa Ci 2 V to 6 V pf UNIT UNIT 4 POT OFFICE BOX DAA, TEXA 5265
5 N5465, N465 8-BIT PAAE-OAD IFT EGITE 16C DECEMBE 1982 EVIED MAY 199 timing requirements over recommended operating free-air temperature range (unless otherwise noted) TA = 25 C N5465 N465 MIN MAX MIN MAX MIN MAX 2 V fclock Clock frequency 4.5 V Mz 6 V tw Pulse duration 2 V /D low 4.5 V V V CK high or low 4.5 V V V /D high before CK 4.5 V V V E before CK 4.5 V V V tsu etup time CK IN low before CK 4.5 V ns 6 V th old time 2 V CK IN high before CK 4.5 V V V Data before /D 4.5 V V V E data after CK 4.5 V V V PA data after /D 4.5 V V UNIT ns ns POT OFFICE BOX DAA, TEXA
6 N5465, N465 8-BIT PAAE-OAD IFT EGITE 16C DECEMBE 1982 EVIED MAY 199 switching characteristics over recommended operating free-air temperature range, C = 50 pf (unless otherwise noted) (see Figure 1) PAAMETE FOM (INPUT) TO (OUTPUT) TA = 25 C N5465 N465 MIN TYP MAX MIN MAX MIN MAX 2 V fmax 4.5 V Mz 6 V V /D Q or Q 4.5 V V V tpd CK Q or Q 4.5 V ns 6 V V Q or Q 4.5 V V V ttt Any 4.5 V ns 6 V UNIT operating characteristics, T A = 25 C PAAMETE TET CONDITION TYP UNIT Cpd Power dissipation capacitance No load 5 pf 6 POT OFFICE BOX DAA, TEXA 5265
7 N5465, N465 8-BIT PAAE-OAD IFT EGITE PAAMETE MEAUEMENT INFOMATION 16C DECEMBE 1982 EVIED MAY 199 From Output Under Test Test Point C = 50 pf (see Note A) igh-evel Pulse ow-evel Pulse tw OAD CICUIT VOTAGE WAVEFOM PUE DUATION Input tp tp eference Input Data Input 10% tsu th 90% 90% tr 10% tf In-Phase Output Out-of-Phase Output 10% tp 90% 90% 90% tr 10% 10% tf tp VO 10% VO tf VO 90% VO tr VOTAGE WAVEFOM ETUP AND OD AND INPUT IE AND FA TIME VOTAGE WAVEFOM POPAGATION DEAY AND OUTPUT TANITION TIME NOTE: A. C includes probe and test-fixture capacitance. B. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: P 1 Mz, ZO = 50 Ω, tr = 6 ns, tf = 6 ns. C. For clock inputs, fmax is measured when the input duty cycle is. D. The outputs are measured one at a time with one input transition per measurement. E. tp and tp are the same as tpd. Figure 1. oad Circuit and Voltage Waveforms POT OFFICE BOX DAA, TEXA 5265
8 IMPOTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. TI warrants performance of its semiconductor products and related software to the specifications applicable at the time of sale in accordance with TI s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. pecific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Certain applications using semiconductor products may involve potential risks of death, personal injury, or severe property or environmental damage ( Critical Applications ). TI EMICONDUCTO PODUCT AE NOT DEIGNED, INTENDED, AUTOIZED, O WAANTED TO BE UITABE FO UE IN IFE-UPPOT APPICATION, DEVICE O YTEM O OTE CITICA APPICATION. Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI products in such applications requires the written approval of an appropriate TI officer. Questions concerning potential risk applications should be directed to TI through a local C sales office. In order to minimize risks associated with the customer s applications, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor does TI warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. Copyright 1996, Texas Instruments Incorporated
SN54HC175, SN74HC175 QUADRUPLE D-TYPE FLIP-FLOPS WITH CLEAR
Contain Four Flip-Flops With Double-Rail Outputs Applications Include: Buffer/Storage Registers Shift Registers Pattern Generators Package Options Include Plastic Small-Outline (D), Thin Shrink Small-Outline
More informationSN54HC377, SN74HC377 OCTAL D-TYPE FLIP-FLOPS WITH CLOCK ENABLE
Eight Flip-Flops With Single-Rail Outputs Clock Enable Latched to Avoid False Clocking Applications Include: Buffer/Storage Registers Shift Registers Pattern Generators Package Options Include Plastic
More informationSN54HC191, SN74HC191 4-BIT SYNCHRONOUS UP/DOWN BINARY COUNTERS
Single Down/Up Count-Control Line Look-Ahead Circuitry Enhances Speed of Cascaded Counters Fully Synchronous in Count Modes Asynchronously Presettable With Load Control Package Options Include Plastic
More informationSN54HC373, SN74HC373 OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS SCLS140B DECEMBER 1982 REVISED MAY 1997
Eight High-Current Latches in a Single Package High-Current -State True s Can Drive up to LSTTL Loads Full Parallel Access for Loading Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline
More informationSN54HC04, SN74HC04 HEX INVERTERS
SCLS07B DECEMBER 92 REVISED MAY 997 Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK),
More informationSN54HC573A, SN74HC573A OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS SCLS147B DECEMBER 1982 REVISED MAY 1997
High-Current -State s Drive Bus Lines Directly or up to LSTTL Loads Bus-Structured Pinout Package Options Include Plastic Small-Outline (DW) and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and
More informationSN54HC00, SN74HC00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
Package Options Include Plastic Small-Outline (D), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description
More informationSN54HC373, SN74HC373 OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
Eight High-Current Latches in a Single Package High-Current -State True s Can Drive up to LSTTL Loads Full Parallel Access for Loading Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline
More informationSN54HC245, SN74HC245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
High-Current -State s Drive Bus Lines Directly or up to LSTTL Loads Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages,
More informationSN54HC365, SN74HC365 HEX BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
High-Current -State s Drive Bus Lines, Buffer Memory Address Registers, or Drive up to LSTTL Loads True s Package Options Include Plastic Small-Outline (D) and Ceramic Flat (W) Packages, Ceramic Chip Carriers
More informationSN54HC132, SN74HC132 QUADRUPLE POSITIVE-NAND GATES WITH SCHMITT-TRIGGER INPUTS
Operation From Very Slow Input Transitions Temperature-Compensated Threshold Levels High Noise Immunity Same Pinouts as HC00 Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB),
More informationSN54ACT00, SN74ACT00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
SCAS AUGUST 99 REVISED MAY 99 Inputs Are TTL-Voltage Compatible EPIC (Enhanced-Performance Implanted CMOS) -µm Process Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), Thin
More informationSN75446, SN75447 DUAL PERIPHERAL DRIVERS
, DUA PERIPERA DRIVER R00A DECEMBER 98 REVIED NOVEMBER 99 Very ow Power Requirements Very ow Input Current Characterized for Use to 0 ma No atch-up at (After Conducting 00 ma) igh-voltage s ( Min) Clamp
More informationSN54HC590A, SN74HC590A 8-BIT BINARY COUNTERS WITH 3-STATE OUTPUT REGISTERS SCLS039C DECEMBER 1982 REVISED MAY 1997
8-Bit Counter With egister High-Current 3-State Parallel egister Outputs Can Drive up to 15 LSL Loads Counter Has Direct Clear Package Options Include Plastic Small-Outline (D, DW), and Ceramic Flat (W)
More informationSN54HCT373, SN74HCT373 OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
Inputs Are TTL-Voltage Compatible Eight High-Current Latches in a Single Package High-Current -State True s Can Drive up to LSTTL Loads Full Parallel Access for Loading Package Optio Include Plastic Small-Outline
More informationPRODUCT PREVIEW SN54AHCT257, SN74AHCT257 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS. description
Inputs Are TTL-Voltage Compatible EPIC (Enhanced-Performance Implanted CMOS) Process Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), Thin Very Small-Outline (DGV), Thin Shrink
More informationSN54ALS273, SN74ALS273 OCTAL D-TYPE FLIP-FLOPS WITH CLEAR SDAS218A APRIL 1982 REVISED DECEMBER 1994
WITH CLEA SDAS2A APIL 2 EVISED DECEMBE 4 Contain Eight Flip-Flops With Single-ail Outputs Buffered Clock and Direct-Clear Inputs Individual Data Input to Each Flip-Flop Applications Include: Buffer/Storage
More information54ACT11020, 74ACT11020 DUAL 4-INPUT POSITIVE-NAND GATES
Inputs Are TTL-Voltage Compatible Flow-Through Architecture to Optimize PCB Layout Center-Pin V CC and GND Configurations to Minimize High-Speed Switching Noise EPIC (Enhanced-Performance Implanted CMOS)
More informationSN54ALS299, SN74ALS299 8-BIT UNIVERSAL SHIFT/STORAGE REGISTERS WITH 3-STATE OUTPUTS
Multiplexed I/O Ports Provide Improved Bit Deity Four Modes of Operation: old (Store) Shift Right Shift eft oad Data Operate With Outputs Enabled or at igh Impedance -State Outputs Drive Bus ines Directly
More informationSN54ALS273, SN74ALS273 OCTAL D-TYPE FLIP-FLOPS WITH CLEAR
WITH CLEA SDAS2A APIL 92 EVISED DECEMBE 99 Contain Eight Flip-Flops With Single-ail Outputs Buffered Clock and Direct-Clear Inputs Individual Data Input to Each Flip-Flop Applications Include: Buffer/Storage
More information74AC11873 DUAL 4-BIT D-TYPE LATCH WITH 3-STATE OUTPUTS SCAS095 JANUARY 1990 REVISED APRIL 1993
3-State Buffer-Type s Drive Bus Lines Directly Bus-Structured Pinout Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and Configuratio Minimize High-Speed Switching Noise EPIC (Enhanced-Performance
More information74ACT11374 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS
Eight D-Type Flip-Flops in a Single Package -State Bus Driving True s Full Parallel Access for Loading Inputs Are TTL-Voltage Compatible Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and
More informationSN54ALS00A, SN54AS00, SN74ALS00A, SN74AS00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain four independent 2-input positive-nand
More information54ACT11109, 74ACT11109 DUAL J-K POSITIVE-EDGE-TRIGGERED FLIP-FLOPS WITH CLEAR AND PRESET
Inputs Are TTL-Voltage Compatible Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and GND Configuratio Minimize High-Speed Switching Noise EPIC (Enhanced-Performance Implanted CMOS) 1-µm
More informationSN74ALVCH V 20-BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS
Member of the Texas Instruments Widebus Family EPIC (Enhanced-Performance Implanted CMOS) Submicron Process ESD Protection Exceeds 200 Per MIL-STD-883, Method 3015; Exceeds 20 Using Machine Model (C =
More informationSN75476 THRU SN75478 DUAL PERIPHERAL DRIVERS
N TRU N8 DUA PERIPERA DRIVER R0 DECEMBER 9 REVIED NOVEMBER 99 Characterized for Use to 00 ma No atch-up at V (After Conducting 00 ma) igh-voltage s (0 Typ) Clamp Diodes for Transient uppression (00 ma,
More informationSN54AHCT174, SN74AHCT174 HEX D-TYPE FLIP-FLOPS WITH CLEAR
Inputs Are TTL-Voltage Compatible EPIC (Enhanced-Performance Implanted CMOS) Process Contain Six Flip-Flops With Single-Rail s Applicatio Include: Buffer/Storage Registers Shift Registers Pattern Generators
More informationSN54ACT241, SN74ACT241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Inputs Are TTL Compatible EPIC (Enhanced-Performance Implanted CMOS) -µm Process Package Optio Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), Thin Shrink Small-Outline (PW), and DIP (N)
More informationCDC337 CLOCK DRIVER WITH 3-STATE OUTPUTS
Low Output Skew, Low Pulse Skew for Clock-Distribution and Clock-Generation Applications TTL-Compatible Inputs and CMOS-Compatible Outputs Distributes One Clock Input to Eight Outputs Four Same-Frequency
More informationSN74ALVCH BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS
Member of the Texas Instruments Widebus Family EPIC (Enhanced-Performance Implanted CMOS) Submicron Process ESD Protection Exceeds 200 Per MIL-STD-883, Method 3015; Exceeds 20 Using Machine Model (C =
More informationSN5407, SN5417, SN7407, SN7417 HEX BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS032A DECEMBER 1983 REVISED NOVEMBER 1997
Converts TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays s Fully Compatible With Most TTL Circuits
More informationSN54ALS688, SN74ALS688 8-BIT IDENTITY COMPARATORS
Compare Two -Bit Words Totem-Pole Outputs () ALS Are Identical to ALS2 Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J)
More informationSN74LVC1G06 SINGLE INVERTER BUFFER/DRIVER WITH OPEN-DRAIN OUTPUT
and Open-Drain Accept Voltages up to 5.5 V Supports 5-V V CC Operation description This single inverter buffer/driver is designed for 1.65-V to 5.5-V V CC operation. DBV OR DCK PACKAGE (TOP VIEW) NC A
More informationSN54ALS08, SN54AS08, SN74ALS08, SN74AS08 QUADRUPLE 2-INPUT POSITIVE-AND GATES
SNALS0, SNAS0, SN7ALS0, SN7AS0 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain
More informationSN54ALS873B, SN54AS873A, SN74ALS873B, SN74AS873A DUAL 4-BIT D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS036D APRIL 1982 REVISED AUGUST 1995
3-State Buffer-Type Outputs Drive Bus Lines Directly Bus-Structured Pinout Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Plastic (NT) and Ceramic (JT) DIPs
More informationSN74S ASYNCHRONOUS FIRST-IN, FIRST-OUT MEMORY WITH 3-STATE OUTPUTS
Independent Asychronous Inputs and Outputs 16 Words by 5 Bits DC to 10-MHz Rate 3-State Outputs Packaged in Standard Plastic 300-mil DIPs description This 80-bit active-element memory is a monolithic Schottky-clamped
More informationdescription V CC 2CLR 2D 2CLK 2PRE 2Q 2Q 1CLR 1D 1CLK 1PRE 1Q 1Q GND 2CLR 1CLR 1CLK NC 1PRE NC 1Q 2CLK 2PRE GND
Package Optio Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs TYPE TYPICAL MAXIMUM CLOCK FREUEY (CL = 0 pf) (MHz) TYPICAL POWER
More information74AC11373 OCTAL TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS
74A7 Eight Latches in a Single Package -State Bus-Driving True s Full Parallel Access for Loading Buffered Control Inputs Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and Configuratio
More informationdescription/ordering information
2-V to 6-V V CC Operation ( C190, 191) 4.5-V to 5.5-V V CC Operation ( CT191) Wide Operating Temperature Range of 55 C to 125 C Synchronous Counting and Asynchronous oading Two s for n-bit Cascading ook-ahead
More informationSN5407, SN5417, SN7407, SN7417 HEX BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
Converts TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays s Fully Compatible With Most TTL Circuits
More informationSN54ALS873B, SN54AS873A, SN74ALS873B, SN74AS873A DUAL 4-BIT D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS036D APRIL 1982 REVISED AUGUST 1995
3-State Buffer-Type Outputs Drive Bus Lines Directly Bus-Structured Pinout Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Plastic (NT) and Ceramic (JT) DIPs
More informationSN54AHCT132, SN74AHCT132 QUADRUPLE POSITIVE-NAND GATES WITH SCHMITT-TRIGGER INPUTS
Inputs Are TTL-oltage Compatible EPIC (Enhanced-Performance Implanted CMOS) Process Operation From ery Slow Input Traitio Temperature-Compeated Threshold Levels High Noise Immunity Same Pinouts as AHCT00
More informationSN54LVC14A, SN74LVC14A HEX SCHMITT-TRIGGER INVERTERS
Typical V OLP ( Ground Bounce) 2 V at V CC = 3.3 V, T A = 25 C s Accept Voltages to 5.5 V Latch-Up Performance Exceeds 100 ma Per JESD
More informationSN54221, SN54LS221, SN74221, SN74LS221 DUAL MONOSTABLE MULTIVIBRATORS WITH SCHMITT-TRIGGER INPUTS
Dual Versions of Highly Stable SN542 and SN742 One Shots SN5422 and SN7422 Demonstrate Electrical and Switching Characteristics That Are Virtually Identical to the SN542 and SN742 One Shots Pinout Is Identical
More informationSN74ALVCHR BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
Member of the Texas Instruments Widebus Family EPIC (Enhanced-Performance Implanted CMOS) Submicron Process UBT (Universal Bus Transceiver) Combines D-Type Latches and D-Type Flip-Flops for Operation in
More informationCD74HCT4514, CD74HCT LINE TO 16-LINE DECODERS/DEMULTIPLEXERS WITH INPUT LATCHES
4.5-V to 5.5-V V CC Operation Fanout (Over Temperature Range) Standard s... 0 LSTTL Loads Bus-Driver s... 5 LSTTL Loads Wide Operating Temperature Range of 55 C to 25 C Balanced Propagation Delays and
More informationSN54ALS74A, SN54AS74A, SN74ALS74A, SN74AS74A DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET
Package Optio Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs TYPE TYPICAL MAXIMUM CLOCK FREUEY (CL = 0 pf) (MHz) TYPICAL POWER
More informationSN75150 DUAL LINE DRIVER
Meets or Exceeds the Requirement of TIA/EIA-232-F and ITU Recommendation V.28 Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between 25 V and 25 V 2-µs Maximum Transition Time Through
More informationua9637ac DUAL DIFFERENTIAL LINE RECEIVER
ua967ac Meets or Exceeds the Requirements of ANSI Standards EIA/TIA--B and EIA/TIA--B and ITU Recommendations V. and V. Operates From Single -V Power Supply Wide Common-Mode Voltage Range High Input Impedance
More informationSN54ALS563B, SN74ALS563B OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS
-State Buffer-Type s Drive Bus Lines Directly Bus-Structured Pinout Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), Standard Plastic (N) and Ceramic (J) 00-mil DIPs,
More informationSN54ACT16373, 74ACT BIT D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS
Members of the Texas Itruments Widebus Family Inputs Are TTL-Voltage Compatible 3-State Bus Driving True s Full Parallel Access for Loading Flow-Through Architecture Optimizes PCB Layout Distributed and
More informationORDERING INFORMATION PACKAGE
Member of Texas Instruments Widebus Family Latch-Up Performance Exceeds 250 ma Per JESD 17 ESD Protection Exceeds JESD 22 2000-V Human-Body Model (A114-A) 200-V Machine Model (A115-A) Bus Hold on Data
More informationSN75158 DUAL DIFFERENTIAL LINE DRIVER
SN78 Meets or Exceeds the Requirements of ANSI EIA/TIA--B and ITU Recommendation V. Single -V Supply Balanced-Line Operation TTL Compatible High Output Impedance in Power-Off Condition High-Current Active-Pullup
More informationSN54AHCT273, SN74AHCT273 OCTAL D-TYPE FLIP-FLOPS WITH CLEAR
Inputs Are TTL-Voltage ompatible EPI (Enhanced-Performance Implanted MOS) Process ontain Eight Flip-Flops With Single-ail s Direct lear Input Individual Data Input to Each Flip-Flop Applicatio Include:
More information54AC11241, 74AC11241 OCTAL BUFFERS/LINE DRIVERS WITH 3-STATE OUTPUTS
SCAS032A JUL 187 REVISED APRIL 13 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and Configuratio Minimize High-Speed
More informationMC3487 QUADRUPLE DIFFERENTIAL LINE DRIVER
Meets or Exceeds Requirements of ANSI EIA/TIA-422-B and ITU Recommendation V. -State, TTL-Compatible s Fast Transition Times High-Impedance Inputs Single -V Supply Power-Up and Power-Down Protection Designed
More informationMAX232, MAX232I DUAL EIA-232 DRIVER/RECEIVER
Operates With Single -V Power Supply LinBiCMOS Process Technology Two Drivers and Two Receivers ± 0-V Input Levels Low Supply Current...8 ma Typical Meets or Exceeds TIA/EIA-22-F and ITU Recommendation
More information54AC16245, 74AC BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
4AC64, 74AC64 6-BIT BUS TRANSCEIVERS SCAS3A MARCH 990 REVISED APRIL 996 Members of the Texas Itruments Widebus Family 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers Flow-Through Architecture
More informationPCA8550 NONVOLATILE 5-BIT REGISTER WITH I 2 C INTERFACE
EPIC (Enhanced-Performance Implanted CMOS) Submicron Process Useful for Jumperless Configuration of PC Motherboard Inputs Accept Voltages to 5.5 V Signals are 2.5-V Outputs Signal is a 3.3-V Output Minimum
More informationSN54AS825A, SN74AS825A 8-BIT BUS-INTERFACE FLIP-FLOPS WITH 3-STATE OUTPUTS SDAS020B JUNE 1984 REVISED AUGUST 1995
Functionally Equivalent to AMD s AM2982 Improved I OH Specificatio Multiple Output Enables Allow Multiuser Control of the Interface Outputs Have Undershoot-Protection Circuitry Power-Up High-Impedance
More informationSN54AHC123A, SN74AHC123A DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS
EPIC (Enhanced-Performance Implanted CMOS) Process Operating Range 2-V to 5.5-V V CC Schmitt-Trigger Circuitry On A, B, and CLR Inputs for Slow Input Traition Rates Edge Triggered From Active-High or Active-Low
More information74ACT11652 OCTAL BUS TRANSCEIVER AND REGISTER WITH 3-STATE OUTPUTS
74ACT62 Independent Registers and Enables for A and B Buses Multiplexed Real-Time and Stored Data Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and Configuratio Minimize High-Speed Switching
More informationSN74ABT STROBED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY
Member of the Texas struments Widebus Family Advanced BiCMOS Technology dependent Asynchronous puts and puts Two Separate 512 18 FIFOs Buffering Data in Opposite Directions Programmable Almost-Full/Almost-Empty
More informationCDC LINE TO 10-LINE CLOCK DRIVER WITH 3-STATE OUTPUTS SCAS442B FEBRUARY 1994 REVISED NOVEMBER 1995
Low Skew, Low Pulse Skew for Clock-Distribution and Clock-Generation pplications Operates at 3.3-V LVTTL-Compatible Inputs and s Supports Mixed-Mode Signal Operation (-V Input and Voltages With 3.3-V )
More informationSN54ALS86, SN54AS86A, SN74ALS86, SN74AS86A QUADRUPLE 2-INPUT EXCLUSIVE-OR GATES
Package Optio Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain four independent 2-input exclusive-or
More informationSN75150 DUAL LINE DRIVER
Meets or Exceeds the Requirement of ANSI EIA/TIA-232-E and ITU Recommendation V.28 Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between 25 V and 25 V 2-µs Max Transition Time
More informationSN75C1406 TRIPLE LOW-POWER DRIVERS/RECEIVERS
Meet or Exceed the Requirements of TIA/EIA-232-F and ITU Recommendation V.28 Very Low Power Consumption... 5 mw Typ Wide Driver Supply Voltage Range... ±4.5 V to ±15 V Driver Output Slew Rate Limited to
More informationMC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A QUADRUPLE LINE RECEIVERS
MC89, MC89A, SN89, SN89A, SN789, SN789A SLLS9B SEPTEMPER 97 REVISED MAY 99 Input Resistance... kω to 7 kω Input Signal Range...± V Operate From Single -V Supply Built-In Input Hysteresis (Double Thresholds)
More informationSN55115, SN75115 DUAL DIFFERENTIAL RECEIVERS
SN, SN7 Choice of Open-Collector or Active Pullup (Totem-Pole) Outputs Single -V Supply Differential Line Operation Dual-Channel Operation TTL Compatible ± -V Common-Mode Input Voltage Range Optional-Use
More informationSN54ALS244C, SN54AS244A, SN74ALS244C, SN74AS244A OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SNALS2C, SNAS2A, SNALS2C, SNAS2A SDAS2C JUL 9 REISED AUGUST 99 -State Outputs Drive Bus Lines or Buffer Memory Address Registers pnp Inputs Reduce dc Loading Package Optio Include Plastic Small-Outline
More informationSN74ACT STROBED FIRST-IN, FIRST-OUT MEMORY
Member of the Texas Itruments idebus Family Load Clock and Unload Clock Can Be Asynchronous or Coincident 256 ords by 18 Bits Low-Power Advanced CMOS Technology Full, Empty, and Half-Full Flags Programmable
More informationTL594 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationSN75174 QUADRUPLE DIFFERENTIAL LINE DRIVER
SN Meets or Exceeds the Requirements of ANSI Standards EIA/TIA--B and RS-8 and ITU Recommendation V.. Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments -State s Common-Mode Voltage
More informationSN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS
PERIPHERAL DRIVERS FOR HIGH-CURRENT SWITCHING AT VERY HIGH SPEEDS Characterized for Use to 00 ma High-Voltage Outputs No Output Latch-Up at 0 V (After Conducting 00 ma) High-Speed Switching Circuit Flexibility
More informationORDERING INFORMATION PACKAGE
Member of Texas Instruments Widebus Family State-of-the-Art Advanced Low-Voltage BiCMOS (ALB) Technology Design for.-v Operation Schottky Diodes on All s to Eliminate Overshoot and Undershoot Industry
More informationTL494M PULSE-WIDTH-MODULATION CONTROL CIRCUIT
Complete PWM Power Control Circuitry Uncommitted Outputs for 00-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationLM148, LM248, LM348 QUADRUPLE OPERATIONAL AMPLIFIERS
µa741 Operating Characteristics Low Supply Current Drain...0.6 ma Typ (per amplifier) Low Input Offset Voltage Low Input Offset Current Class AB Output Stage Input/Output Overload Protection Designed to
More informationTL494C, TL494I, TL494M, TL494Y PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Circuitry Uncommitted Outputs for 00-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationAM26LS31 QUADRUPLE DIFFERENTIAL LINE DRIVER
AM6LS SLLSG JANUARY 979 REVISED FEBRUARY Meets or Exceeds the Requirements of ANSI TIA/EIA--B and ITU Recommendation V. Operates From a Single -V Supply TTL Compatible Complementary Outputs High Output
More information54AC11533, 74AC11533 OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS
5A1533, 7A1533 TAL D-TYPE TRANSPARENT LATHES SAS00 D257, JULY 187 REVISED APRIL 13 8-Latches in a Single Package 3-State Bus-Driving Inverting s Full Parallel Access for Loading Buffered ontrol Inputs
More informationMC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS
Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11 3-State, TTL-Compatible s Fast Transition Times Operates From Single 5-V Supply
More informationLM139, LM139A, LM239, LM239A, LM339, LM339A, LM339Y, LM2901 QUAD DIFFERENTIAL COMPARATORS
Single Supply or Dual Supplies Wide Range of Supply Voltage...2 V to 36 V Low Supply-Current Drain Independent of Supply Voltage... 0.8 ma Typ Low Input Bias Current... 25 Typ Low Input Offset Current...3
More informationORDERING INFORMATION PACKAGE
Operates From.65 V to 3.6 V Inputs Accept Voltages to 5.5 V Max t pd of 4.8 ns at 3.3 V Typical V OLP (Output Ground Bounce) 2
More informationIMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the
More informationTL598 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Function Totem-Pole Outputs for 200-mA Sink or Source Current Output Control Selects Parallel or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either Output
More informationTPS CHANNEL POWER SUPPLY SUPERVISOR
3-CHANNEL POWE SUPPLY SUPEVISO Over Voltage Protection and Lock Out for 5 V, 3.3 V, and 12 V Under Voltage Protection and Lock Out for 5 V and 3.3 V Fault Protection Output with Open Drain Output Stage
More informationSN QUADRUPLE HALF-H DRIVER
-A -Current Capability Per Driver Applications Include Half-H and Full-H Solenoid Drivers and Motor Drivers Designed for Positive-Supply Applications Wide Supply-Voltage Range of 4.5 V to 6 V TTL- and
More information1OE 3B V GND ORDERING INFORMATION. TOP-SIDE MARKING QFN RGY Tape and reel SN74CBTLV3126RGYR CL126 PACKAGE
SN74CBTLV326 LOW-VOLTAGE QUADRUPLE FET BUS SWITCH SCDS03H DECEMBER 997 REVISED APRIL 2003 Standard 26-Type Pinout 5-Ω Switch Connection Between Two Ports Isolation Under Power-Off Conditions Latch-up Performance
More informationTL594 PULSE-WIDTH-MODULATION CONTROL CIRCUIT
Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Operating Range 2-V to 5.5-V V CC 3-State s Drive Bus Lines Directly Latch-Up
More informationSN75C1406 TRIPLE LOW-POWER DRIVERS/RECEIVERS
Meet or Exceed the Requirements of ANSI EIA/TIA-232-E and ITU Recommendation V.28 Very Low Power Consumption 5 mw Typ Wide Driver Supply Voltage Range ±4.5 V to ±15 V Driver Output Slew Rate Limited to
More informationTSL230, TSL230A, TSL230B PROGRAMMABLE LIGHT-TO-FREQUENCY CONVERTERS
igh-resolution Conversion of ight Intensity to Frequency With No External Components Programmable Sensitivity and Full-Scale Output Frequency Communicates Directly With a Microcontroller description Single-Supply
More informationNE555, SA555, SE555 PRECISION TIMERS
Timing From Microseconds to Hours Astable or Monostable Operation Adjustable Duty Cycle TTL-Compatible Output Can Sink or Source up to 00 ma Designed To Be Interchangeable With Signetics NE, SA, and SE
More informationORDERING INFORMATION PACKAGE
Member of Texas Instruments Widebus Family Latch-Up Performance Exceeds 250 ma Per JESD 17 description This 16-bit (dual-octal) noninverting bus transceiver contains two separate supply rails; B port has
More informationSN54AHC573, SN74AHC573 OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
Operating Range 2-V to 5.5-V V CC 3-State s Directly Drive Bus Lines Latch-Up Performance Exceeds 250 ma Per JESD 17 description The AHC573 devices are octal traparent D-type latches designed for 2-V to
More informationSN54F74, SN74F74 DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET
WITH LEAR AND PRESET SDFS0A MARH 197 REVISED OTOBER 199 Package Optio Include Plastic Small-Outline Packages, eramic hip arriers, and Standard Plastic and eramic 00-mil DIPs description These devices contain
More informationTLC7524C, TLC7524E, TLC7524I 8-BIT MULTIPLYING DIGITAL-TO-ANALOG CONVERTERS
Easily Interfaced to Microprocessors On-Chip Data Latches Monotonic Over the Entire A/D Conversion ange Segmented High-Order Bits Ensure Low-Glitch Output Interchangeable With Analog Devices AD7524, PMI
More informationMC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
Short-Circuit Protection Wide Common-Mode and Differential oltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Designed to Be Interchangeable With Motorola MC1/MC1 and Signetics
More informationSN75C185 LOW-POWER MULTIPLE DRIVERS AND RECEIVERS
Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU Recommendation V.28 Single Chip With Easy Interface Between UART and Serial-Port Connector Less Than 9-mW Power Consumption Wide Driver Supply
More informationSN74ACT ASYNCHRONOUS BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY
dependent Asynchronous puts and puts ow-power Advanced CMOS Technology Bidirectional Dual 024 by 9 Bits Programmable Almost-Full/Almost-Empty Flag Empty, Full, and alf-full Flags SN74ACT2235 ASYNCRONOUS
More information