THM80X Series Industry degree high accuracy Temp. & humidity transmitter

Transcription

1 THM80X Series Industry degree high accuracy Temp. & humidity transmitter Introduction IP65 protection degree, rugged aluminum case, fit in variety harsh environment Capable of temperature compensation Linear adjustment temperature & humidity by computer, analogue output or option RS-485 Measure high accuracy Temp. & humidity, reaction quickly, the sensor can work well after temporary condensation, long term stable in high humidity environment Process Temp. : up to 0, S.S. probe proof pressure : 0 bar, metal connector : installation repeatedly Switch multifunction physical quantities:[%rh] [ ] [mbar] [g/kg] [g/m3] [kj/kg] Calibration physical quantities, measuring range, analogue output, station, etc Free calibration software : data logger / record datas / charts Application Industrial Process Monitoring / Air Conditioning / Environmental entilation Control Buildings / Factories / Hospitals / Clean rooms / Laboratories / Weather stations environmental monitoring Storage rooms / Environmental chambers / Greenhouses / Mushroom farms Semiconductor / Electronics / Paper / Printing / Textiles / Steel and iron industry / Food / Chemical / Pharmaceutical / Biotechnology industry

2 Specification Input Input type Output Output Signal connection Modbus Display type Display range Height of character Load resistance Output calibration ( ZERO & SPAN ) Response time t90 ( at 5 C ) Capacitive Humidity Sensor & PT 00Ω A class 0... / 4... / 0... / / wire option RS-485 ( programmable ) and analog output LCD Module with back light, double character upon request, one decimal place 5.55mm current output : max. 500Ω / voltage output : min. 0KΩ software;keybord S.S. metal grid filter with mesh );< 30S( sintered filter ) Accuracy ( at +5 C ) Temperature ± 0.5 C ± 0.00 C x t actual Humidity ( %RH ) nonar error : ±. % RH hysteresis error : ± 0.8 % RH repeatability error : ± 0.4 % RH Humidity ( %RH) ± % RH Thermal sensitivity Temp. error 0.05 % RH / C Factory Uncertainty ( at +5 C ) Temp. uncertainty 0.4 C Humidity uncertainty 0.4 %RH ( >0... % ) 0.65 %RH ( > % ) 0.97 %RH ( > % ) Environment Media measured Working Temp. Working humidity Working Temp. for probe storage temp. proof pressure for S.S. probe Certification CE certification Electrical supply Current consumption Electrical connection Protect degree Electric protection Installation Housing Probe Cable Weight Air Housing : C ; Housing with display : C Housing : % ( non-cond. ) Wall type: ; Duct type: ; Remote type: C 0 bar EN 636- : 06 EN : 06 Emissions EN 550 : 09/A : 0 Immunity IEC : 08 IEC : 06 / A : 07 / A : 0 IEC : DC /... 30AC DC 4 : 60 / DC : AC 4 : / AC : 30 M - 4 PIN metal connector with m cable or terminal ( metal cable gland ) Body : IP65;Probe : IP Polarity protection Over-voltage Short-circuit Metal fitting thread Aluminum alloy SUS 304 Teflon THM80 : 455g / THM80 : 5g / THM803 : 635g Physical Quantity Measuring Range List Temp. & Humidity QC Inspection System Beside Temp. & dew point, other physical quantities range as default setting Physical quantity THM80 Indoor THM80 Duct THM803 Remote Temp.(T) Humidity(H) %RH Dew point (D) Frost Point(F) Wet-bulb Temp.(W) apor pressure(e) Mixture ratio(r) Absolute humidity() Specific enthalpy(s) mbar g/kg g/m³ kj/kg Use Thunder 500 humidity generator, MBW473 dew point mirror, Laboratory level facility to produce products, and automatic QC inspection sheet printing and factory report.

3 3-cycle curve According to IEC 698 and ISO 705 standard to measuring 3-cycle curve. As the charts result, accuracy of test sample match with accuracy chart of humidity generator + dew point mirror 00 Ascending Descending Total average Standard Humidity generator + Dew point mirror THM80X Test sample THM80X Test sample Actual humidity ( % ) Target humidity ( % ) Humidity ( % ) USB to Isolated RS-485 Application USB SCADA CR-800 USB to RS-485 Converter Device. PC. RS-485 to USB Converter 3. power supply 4. Download THM80X UI please see THM80X product page attach Option converter : CR-800 HMI Transmitter PLC

4 Ordering Guide Type Installation Physical quantity output Wall Duct Remote Temperature Humidity Dew point Frost-point Web-bulb temperature apor pressure Mixture ratio Absolute humidity Speific enthalpy RS-485 ( default temp. ) Physical quantity scale As physical quantity measuring range list ( H, F, W, E, R,, S ) Special range Signal output RS-485 Physical quantity output Temperature Humidity Dew point Frost-point Web-bulb temperature apor pressure Mixture ratio Absolute humidity Speific enthalpy RS-485 ( Default Humidity ) Physical quantity scale As physical quantity measuring range list ( H, F, W, E, R,, S ) Special range Signal output RS-485 Display No Yes Electric connector M6 Metal cable gland M Metal connetor Filter S.S. Metal grid filter with mesh Sintered filter Remote cable ( max. length : 0 m ) THM80 m TEFLON cable 5 m TEFLON cable Other length Option / other request Other request ( quote as demand ) RS Analog 3 T 48 H 00 D N S 3 T H D F W E R S N YY T H D F W E R S N YY X D N M M S 5 W U

5 Electric Connector Unit : mm M type (M-4PIN metal connector RS-485 or analog M type (M-8PIN metal connector) RS-485+analog N type (M6 cable gland) RS-485+analog Dimension THM80 ( wall ) THM80 ( duct ) THM803 ( remote ) Ø4.3 mm 94mm 34mm 04mm 9.55mm 6mm 70mm M screw thread ( metal fitting thread ) or M6 metal cable gland 80mm 95.54mm M screw thread ( metal fitting thread ) or M6 metal cable gland Ømm 4mm M screw thread ( metal fitting thread ) or M6 metal cable gland 50mm 3mm length as request gauge : 5.3mm M type Ømm 63.3mm 3mm 50mm S.S. metal grid filter with mesh or sintered filter N type Ø mm

6 Analogue Diagram brown 4black white 3 blue OUT OUT DC & AC cc OUT OUT OUT OUT DC & AC M connector 4P terminal M type ( 4P ) N type RS-485 Diagram black white brown 4 3 blue M type ( 4P ) DC & AC cc OUT OUT Tx Rx DC & AC when output of ordering code is RS-485 ( without analogue ), RS-485 diagram of default setting is M type. N type Analogue + RS-485 Diagram cc OUT OUT DC & AC OUT OUT brown black 7 white 3 blue yellow green RS485 gray OUT Tx Rx OUT DC & AC M type ( 8P ) N type ( M6 )