SDE PEW- 12 Hand Tool
|
|
- Diane Merritt
- 5 years ago
- Views:
Transcription
1 SDE PEW- 12 Hand Tool Instructon Sheet Assembly wth De Assembly OCT 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are ntended for occasonal use and low volume applcatons. A wde selecton of powered applcaton equpment for extended -use, producton operatons s avalable. Locator De Set Nut Handle Wre Crmper (Upper De) Lower Contact Support Statonary Jaw Movng Jaw Emergency Ratchet Release De Retenton Screws Nut Insulaton Crmper (Upper De) Short Retanng Pns (2) Requred Anvl (Lower) Wre De Anvl (Lower) Insulaton De Ratchet Wheel Long Retanng Pns (2) Requred DIE ASSEMBLY PART NUMBER CONTACT WIRE SIZE INSULATION DIA STRIPLENGTH (Pn) , , , mm [24-22 AWG] [ ] [ ] (Socket) , INTRODUCTION SDE PEW--12 Hand Tool Assembly conssts of SDE PEW--12 Frame Assembly and de set assembly See Fgure 1. The tool s used to crmp Slm Seal SSL Contacts. Dmensons n ths nstructon sheet are n mllmeters [wth nches n brackets]. Fgures and llustratons are for reference only and are not drawn to scale. Reason for revson s gven n Secton 10, REVISION SUMMARY. Fgure 1 2. DESCRIPTION The tool frame features two jaws, a handle, ratchet adjustment wheel, and an emergency ratchet release. The de set conssts of an ndenter (upper de) and an anvl (lower de). The tool frame holds a de assembly wth two crmpng chambers. See Fgure 1. De retanng pns and de retanng screws are used to poston and secure the des n the tool frame. The tool features a ratchet and an adjustment wheel wth a range of settngs. The ratchet ensures that the tool has completed the cycle and wll not release untl the handles have been FULLY closed, unless the emergency ratchet release s rotated to manually release the ratchet. The adjustment wheel controls the amount of handle pressure exerted on the des durng the crmpng procedure. E2010 Tyco Electroncs Corporaton, Berwyn, PA TOOLING ASSISTANCE CENTER All Rghts Reserved PRODUCT INFORMATION TE logo and Tyco Electroncs are trademarks. *Trademark. Other product names, logos, or company names mght be trademarks of ther respectve owners. Ths controlled document s subject to change. For latest revson and Regonal Customer Servce, vst our webste at 1 of 5 LOC B
2 The des bottom before the ratchet releases. Ths feature ensures maxmum tensle performance of the crmp. DO NOT re -adjust the ratchet. The ratchet has detents wth audble clcks as the handles are closed. The ratchet releases on the sxth clck. 3. INSTALLATION AND REMOVAL OF DIE SET AND LOCATOR ASSEMBLY (Fgure 1) 1. Open the tool handles and remove the two de retanng screws from the tool jaws. 2. Place the wre anvl and nsulaton anvl so that ther chamfered sdes and ther marked surfaces face outward, when mounted n the movng jaw of the tool frame. 3. Insert the two de retanng pns. 4. Insert the short de retanng screw through the jaw and through both anvl des, and tghten the screw just enough to hold the des n place. Do not tghten the screw completely at ths tme. 5. Place the wre crmper and nsulaton crmper so that ther chamfered sdes and ther marked surfaces face outward, when mounted n the statonary jaw of the tool frame. 6. Insert the two de retanng pns. 7. Insert the long de retanng screw through the jaw and through both crmper des, and tghten the screw just enough to hold the des n place. Do not tghten the screw completely at ths tme. 8. Carefully close the tool handles, makng sure that the anvls and crmpers algn properly. Contnue closng the tool handles untl the ratchet n the tool frame has engaged suffcently to hold the anvls and crmpers n place, then tghten both de retanng screws. 9. Place the locator assembly over the end of the long screw, and poston the locator assembly aganst the sde of the tool jaw. 10. Place the nut onto the end of the long screw and tghten the nut enough to hold the locator assembly n place, whle stll allowng the locator to slde up and down. 11. To dsassemble, close the tool handles untl the ratchet releases, remove the nut, the locator assembly, the two de retanng screws, and the four de retanng pns, and slde the anvls and crmpers out of the tool jaws. 4. CONTACT SUPPORT ADJUSTMENT (Fgure 2) The contact support s preset pror to shpment, but mnor adjustment may be necessary. 1. Make a sample crmp and determne f the contact s straght, bendng upward, or bendng downward. 2. If adjustment s requred, loosen the screw that holds the contact support onto the locator assembly. 3. Place a contact wth wre nto the proper nest and close the tool handles untl the ratchet reaches the sxth clck, or untl the contact support touches the contact. 4. Slghtly loosen the nut that holds the locator assembly onto the tool frame. 5. Move the contact support as requred to elmnate the bendng of the contact. 6. Tghten the nut and close the handles untl the ratchet releases. 7. Remove and nspect the contact. 8. Make another sample crmp. If the contact s straght, tghten the contact support screw. If the contact s stll beng bent durng crmpng, repeat the adjustment procedure. 5. CRIMPING PROCEDURE Ths tool s provded wth a crmp adjustment feature. Intally, the crmp heght should be verfed as specfed n Fgure 3. Refer to Secton 6, CRIMP HEIGHT INSPECTION, and Secton 7, CRIMP HEIGHT ADJUSTMENT, to verfy crmp heght before usng the tool to crmp desred contacts and wre szes. Refer to the table n Fgure 1 and select wre of the specfed sze and nsulaton dameter. Strp the wre to the length ndcated n Fgure 1, takng care not to nck or cut wre strands. Select an applcable contact and dentfy the approprate crmp secton accordng to the wre sze markngs on the tool. Refer to Fgure 2 and proceed as follows: 2 of 5 Tyco Electroncs Corporaton
3 Contact Support Locator Screw for Contact Support Back of Tool (Wre Sde) Contact (Typ) Strp Length Lower Support Wre Locator n Wre Stop Slot Wre Inserted to Stop Fgure 2 1. Hold the tool so that the back (wre sde) s facng you. Squeeze tool handles together and allow them to open fully. 2. Holdng the contact by the matng end, nsert the contact nsulaton barrel frst through the front of the tool and nto the approprate crmp secton. 3. Poston the contact so that the matng end of the contact s on the locator sde of the tool, and so that the open U of the wre and nsulaton barrels must face the top of the tool. Place the contact up nto the nest so that the movable locator drops nto the slot n the contact. Refer to Fgure 2. Butt the front end of the wre barrel aganst the movable locator. Make sure that both sdes of the nsulaton barrel are started evenly nto the crmpng secton. Do NOT attempt to crmp an mproperly postoned contact. 6. CRIMP HEIGHT INSPECTION Crmp heght nspecton s performed through the use of a mcrometer wth a modfed anvl, commonly referred to as a crmp--heght comparator. Tyco Electroncs does not manufacture or market crmp--heght comparators. Detaled nformaton on obtanng and usng crmp--heght comparators can be found n Instructon Sheet Proceed as follows: 1. Refer to Fgure 1 and select a wre (maxmum sze) for each crmp secton lsted. 2. Refer to Secton 5, CRIMPING PROCEDURE, and crmp the contact(s) accordngly. 3. Usng a crmp heght comparator, measure the wre barrel crmp heght lsted n Fgure 3. If the crmp heght conforms to that shown n the table, the tool s consdered dmensonally correct. If not, the tool must be adjusted. Refer to Secton 7, CRIMP HEIGHT ADJUSTMENT. Poston Pont on Center of Wre Barrel Opposte Seam Modfed Anvl WIRE SIZE (MAX) CRIMP SECTION (WIRE SIZE MARKINGS) A CRIMP HEIGHT DIMENSION A AND TOLERANCE (+) 22 AWG [ ] Fgure 3 Damaged product should not be used. If a damaged contact s evdent, t should be replaced. Contacts must not be re -termnated. Tyco Electroncs Corporaton 3 of 5
4 7. CRIMP HEIGHT ADJUSTMENT Although the ratchet s preset pror to shpment, t s mportant to verfy the crmp heght usng a mcrometer or calper. General use and subsequent wear may cause the tool to go out of adjustment. It s recommended that crmp heght be nspected, and the ratchet be adjusted, f necessary, on a regular bass. Refer to Fgure 4, and proceed as follows: 1. If the crmp heght s larger than recommended, remove the ratchet wheel adjustment screw and rotate the adjustment wheel counterclockwse (+) to a hgher settng. Renstall the screw. Repeat as requred. 2. If the crmp heght s smaller than recommended, remove the ratchet wheel adjustment screw and rotate the adjustment wheel clockwse (--) to a lower settng. Renstall the screw. Repeat as requred. 3. If the crmp cannot be made to conform to the recommended crmp heght, the tool or de set must be replaced. See Secton 9, REPLACEMENT. 8. MAINTENANCE AND INSPECTION 8.1. Daly Mantenance 1. Remove dust, mosture, and other contamnants wth a clean, soft brush, or a clean, soft, lnt--free cloth. DO NOT use any objects that could damage the des or tool. 2. Make sure that the proper de retanng screws are properly secured. 3. When the tool s not n use, keep the handles closed to prevent objects from becomng lodged n the des. Store the tool n a clean, dry area. 4. Remove all lubrcaton and accumulated flm from the des by mmersng the des n a sutable commercal degreaser Inspecton 1. Close the tool handles untl the ratchet releases, and then allow them to quckly open freely. If they do not open quckly and fully, the sprng s defectve. See Secton 9, REPLACEMENT. 2. Inspect the crmpng surfaces of the des for flattened, chpped, worn, or cracked areas. If damage s evdent, the des must be replaced. Refer to Secton 9, REPLACEMENT. Screw Fgure 4 Ratchet Wheel 9. REPLACEMENT Order replacements through your representatve, or call , or send a facsmle of your purchase order to , or wrte to: CUSTOMER SERVICE ( ) TYCO ELECTRONICS CORPORATION P.O. BOX 3608 HARRISBURG, PA REVISION SUMMARY S Updated document to corporate requrements S Changed product name n Secton 1 S Changed wre sze n tables n Fgures 1 and 3 4 of 5 Tyco Electroncs Corporaton
5 De Assembly Can Be Used In the Followng Tools: PRO-CRIMPER III Hand Tool (Instructon Sheet ) SDE PEW- 12 Hand Tool (Instructon Sheet ) SDE Bench Termnator (Customer Manual ) 626 Adapter (Instructon Sheet ) Battery Tool (Shouldered De) , - 2 (Customer Manual ) Battery Tool (Pn De) , - 2 (Customer Manual ) Tyco Electroncs Corporaton 5 of 5
Instruction Sheet SDE- SA Hand Tool Assembly with Die Assembly
Instructon Sheet 408-10002 wth De Assembly 1752938-2 06 APR 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are ntended for
More informationPRO-CRIMPER* III Hand. with Die Assembly OCT 11 Rev C. Pivot Pin. Die Assembly Moving Jaw CONTACT FAMILY SIZE (AWG)
PRO-CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 58514-1 408-9973 wth De Assembly 58514-2 12 OCT 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationPRO- CRIMPER* III Hand Crimping
PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 91338-1 408-8377 wth De Assembly 91338-2 22 JUL 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationPRO- CRIMPER* III Hand Crimping
PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 58641-1 wth 408-4379 De Assembly 58641-2 18 JUN 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationPRO-CRIMPER* III Hand Crimping Tool Assembly with Die AssemblY
PRO-CRIMPER* III Hand Crmpng Tool Assembly 90758-1 wth De AssemblY 90758-2 Instructon Sheet 408-9938 01 NOV 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationPRO- CRIMPER* III Hand
PRO- CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 90759-1 408-9962 wth De Assembly 90759-2 03 MAY 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationPRO- CRIMPER III Hand Crimping Tool Assembly DESCRIPTION (Figures 1 and 2)
PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 58495-1 408-9819 Wth De Assembly 58495-2 22 JUL 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationPRO- CRIMPER* III Hand
PRO- CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 58529-1 408-9999 wth De Assembly 58529-2 11 AUG 14 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationPRO- CRIMPER* III Hand Crimping
PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool 58448-2 408-9357 Wth De 58448-3 10 Mar 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand
More informationPRO- CRIMPER III Hand Crimping Tool Assembly INSTALLATION AND REMOVAL OF DIE SET AND LOCATOR ASSEMBLY (Figure 2)
PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 90547-1 wth 408-9884 De Assembly 90547-2 02 NOV 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationonlinecomponents.com
PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 58535-1 wth 408-4021 De Assembly 58535-2 29 JUL 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationPRO-CRIMPER* III Hand Tool Assembly with Die Assembly
PRO-CRIMPER* III Hand Tool Assembly 2063778-1 wth De Assembly 2063778-2 Instructon Sheet 408-10290 02 FEB 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationPRO- CRIMPER* III Hand
PRO- CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 90684-1 408-9934 wth De Assembly 90684-2 09 OCT 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationPRO-CRIMPER* III Hand Crimping Tool Assembly with Die Assembly
PRO-CRIMPER* III Hand Crmpng Tool Assembly 90548-1 wth De Assembly 90548-2 Instructon Sheet 408-9885 02 NOV 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationPRO-CRIMPER* III Hand Crimping Tool Assembly and Die Assemblies [ ]
PRO-CRIMPER* III Hand Crmpng Tool Assembly 58546-1 and De Assembles 58545-[ ] Instructon Sheet 408-8678 13 MAR 14 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationHand Crimping Tool (For Insulated Heat Shrink Splices)
Hand Crmpng Tool 607949-1 (For Insulated Heat Shrnk Splces) Instructon Sheet 408-4087 23 JAN 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand
More informationLocator Pin Indexing Pin. Wire Size Marking CAUTION NOTE TOOLING ASSISTANCE CENTER PRODUCT INFORMATION
ROTA-CRIMP* Crmpng Tool Instructon Sheet 408-2681 68321-1 13 APR 12 Statonary De (Nest) Anvl De Hold-Down Devce and Contact Locator Front of Tool Locator Pn Indexng Pn Wre Sze Markng The hold-down devce
More informationSTRATO-THERM* Terminal and Splice Hand Crimping Tools and 59461
STRATO-THERM* Termnal and Splce Hand Crmpng Tools 59294 and 59461 Instructon Sheet 408-1259 17 AUG 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered
More informationInsertion/Extraction Tool and Replacement Tip Kits [ ]
Inserton/Extracton Tool 91285-1 and Replacement Tp Kts 543382-[ ] Instructon Sheet 408-9404 19 JUN 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered
More informationInstruction Sheet ROTA- CRIMP* Hand Crimping Tools and
Instructon Sheet ROTA- CRIMP* Hand Crmpng Tools 08-09 6007 and 6007- APR PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are
More informationTerminating Tools
Termnatng Tools 2-231652- 5 Instructon Sheet and 2-231652- 9 for 408-9770 DEConnect Modular Plugs 29 NOV 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually
More informationInstruction Sheet AMPMODU* MTE CONNECTORS Mar 11 Rev A
Instructon Sheet AMPMODU* MTE CONNECTORS 408-6919 10 Mar 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are ntended for
More informationPRO- CRIMPER* III Hand Crimping
PRO- CRIMPER* III Hand Crimping Instruction Sheet Tool Assembly 58448-2 408-9357 With Die Assembly 58448-3 10 Mar 11 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use
More informationJUL 15 Rev E
ORIGINAL INSTRUCTIONS SDE PEW-12 Hand Crimping Tool Assembly 2031734-1 with Die Assembly 2031734-2 Instruction Sheet 408-10243 02 JUL 15 Rev E PROPER USE GUIDELINES Cumulative Trauma Disorders can result
More informationRead these instructions thoroughly before crimping any contacts.
PRO CRIMPER III Hand Crimping Tool Assembly 58583 1 consists of Die Assembly 58583 2 and PRO CRIMPER III Hand Crimping Tool Frame 354940 1. The die assembly consists of crimping dies and a locator assembly.
More informationonlinecomponents.com
Figure 1 PRO CRIMPER III Hand Crimping Tool Assembly 58603 1 consists of Die Assembly 58603 2 and PRO CRIMPER III Hand Tool Frame 354940 1. The die assembly consists of crimping dies and a locator assembly.
More informationAUG 15 Rev M
ORIGINAL INSTRUCTIONS PRO-CRIMPER III Hand Crimping Tool Assembly 58433-3 with Die Assembly 58423-1 Instruction Sheet 408-9252 21 AUG 15 Rev M PROPER USE GUIDELINES Cumulative Trauma Disorders can result
More informationPneumatic Power Bench Assembly
Pneumatc Power Bench Assembly 58338-1 Instructon Sheet 408-9393 09 AUG 11 Fgure 1 1. INTRODUCTION Pneumatc Power Bench Assembly 58338-1 s a pneumatc power unt desgned to accept a varety of nterchangeable
More informationA socket contact support (supplied separately) must be installed onto the locator assembly.
Figure 1 PRO CRIMPER III Hand Tool Assembly 1976444 1 consists of PRO CRIMPER III Hand Tool Frame 354940 1 and Die Assembly 1976444 2. The tool assembly is used to crimp the contacts listed in Figure 1.
More informationMCP 2.8 mm Contact System and Wire Seal for 1P Starter Motor Connectors
MCP 2.8 mm Contact System and Wre Seal for 1P Starter Motor Connectors Applcaton Specfcaton 114-13295 05 MAY 11 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n
More informationShur-Plug*.156 Diameter Terminals and Receptacle Contacts
Shur-Plug*.156 Dameter Termnals and Receptacle Contacts Applcaton Specfcaton 114-2042 07 NOV 12 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and
More informationSDE Electric Bench Terminator READ THIS FIRST! customer manual TOOLING ASSISTANCE CENTER
SDE Electrc Bench Termnator 1490076-2 Customer Manual 409-10052 31 JAN 12 customer manual SAFETY A. PRECAUTIONS READ THIS FIRST!............................ 2 1. INTRODUCTION........................................................
More informationHand Crimping Tools , , and AUG 12 Rev D
Instruction Sheet 408-7332 Hand Tools 90123-2, 90123-5, and 90124-2 29 AUG 12 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools
More informationAMPINNERGY* Modular Wiring System 25 JUL 11 Rev G
Applcaton Specfcaton 114-6039 AMPINNERGY* Modular Wrng System 25 JUL 11 Rev G All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and nches]. Unless otherwse
More informationConnector Assemblies 06 JUN 11 Rev C
Applcaton Specfcaton Power Seres 50 114-13071 Connector Assembles 06 JUN 11 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and nches]. Unless otherwse
More informationUltra- Fast Series 110, 125,
Ultra- Fast Seres 0, 25, Applcaton Specfcaton 87, 205, and 250 Fully- Insulated 4-223 FASTON* Termnals 22 FEB 3 Rev H All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons
More informationSOLISTRAND* Flag Terminal Crimping Dies
SOLISTRAND* Flag Terminal Crimping Dies Instruction Sheet 408-8908 22 DEC 10 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools
More informationHand Crimping Tool [ ]
408-8738 Revision T, Jan. 2017 PRO-CRIMPER III Hand Crimping Tool 790163-[ ] 1. Introduction PRO-CRIMPER III Hand Crimping Tool Assembly 790163-[ ] consists of PRO-CRIMPER III Hand Tool Frame 354940-1
More informationCrimping Dies for TERMINYL* and PLASTI-GRIP* Terminals and Splices
Crimping Dies for TERMINYL* and PLASTI-GRIP* Terminals and Splices Instruction Sheet 408-10051 11 APR 17 Rev D PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually
More informationOCT 14 Rev K
ORIGINAL INSTRUCTIONS Hand Crimping Tool 68026 for TERMI-FOIL* Product Instruction Sheet 408-2363 27 OCT 14 Rev K PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of
More informationType III+ (Size 16) Contacts 15 MAR 11 Rev L
Applcaton Specfcaton 114-10004 Type III+ (Sze 16) Contacts 15 MAR 11 Rev L NOTE All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and nches]. Unless otherwse
More informationTerminals and Splices 19 OCT 11 Rev D. Crimping Dies for Head Numbers 69065, 69067, and Hand Tool Yoke. Place Screwdriver Here to Remove Dies
Instruction Sheet Crimping Dies for SOLISTRAND* 408-9786 Terminals and Splices 19 OCT 11 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
More informationCrimping Dies; PN thru 47825, 47915, and 47918
Crimping Dies; PN 47820 thru 47825, 47915, and 47918 Instruction Sheet 408-1729 22 NOV 16 Rev K Crimping Dies; PN 47820 thru 47825, 47915, and 47918 (Typical) Crimping Die Wire Size Part Number Color Code
More informationTerminal and Splice , , and JUN 12 Rev D NOTE. CERTI-CRIMP* Hand Crimping Tool Ratchet Control CAUTION NOTE
Terminal and Splice Instruction Sheet Crimping Tools 408-1254 69339, 69354-1, and 69355 11 JUN 12 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered
More informationDESCRIPTION 3. DIE INSTALLATION AND REMOVAL Die Removal (Figure 3) 3.1. Die Installation (Figure 3) Hydraulic Hand Tool
Crimping Dies Instruction Sheet for SOLISTRAND* 08 869 s and Splices 9 APR PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools
More informationHydraulic Hand Crimping Tool, PN
ORIGINAL INSTRUCTIONS Hydraulic Hand Crimping Tool, PN 59975-1 Instruction Sheet 408-6758 21 JUN 17 Rev F PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually
More informationInstruction Sheet 2 mm Common Termination (CT) Head Assembly
Instruction Sheet 2 mm Common Termination (CT) 408-9426 Head Assembly 58372-1 05 MAY 14 Wire Inserter (Shown In Up Position) Carriage Drag Wire Guide Feed Pawl (Portion of Head Assembly Shown Cut Away
More informationSOLISTRAND* Crimping Dies
SOLISTRAND* Crimping Dies Instruction Sheet (Used in Crimping Heads 08-697 69097 and 69099) 5 APR Terminals Butt Splices Parallel Splices = Wire Barrel DIE SET NUMBERS FOR DIE SET CRIMPING HEAD 69097 NUMBERS
More informationCrimping Dies for SOLISTRAND* Terminals and Splices
ORIGINAL INSTRUCTIONS Crimping Dies for SOLISTRAND* Terminals and Splices Instruction Sheet 408-8691 02 AUG 18 Rev H1 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use
More informationFEB 18 Rev D
ORIGINAL INSTRUCTIONS Terminal and Splice Crimping Die Assemblies Instruction Sheet 408-1632 01 FEB 18 Rev D PROPER USE GUIDELINES Cumulative trauma disorders can result from the prolonged use of manually
More informationAPR 15 Rev A
ORIGINAL INSTRUCTIONS CERTI-CRIMP* Hand Tools 47386-4, 47387-7, and 525690-1 Instruction Sheet 411-1050 24 APR 15 Rev A PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use
More informationThis instruction sheet covers the application and maintenance procedures for Crimping Die Assembly
Figure 1 This instruction sheet covers the application and maintenance procedures for Crimping Die Assembly 318106 1. For additional information on COPALUM terminals and splices, refer to Catalog 82020.
More informationINSTRUCTION MANUAL BENCH LATHE
WLLOUGHBY COMMUNTY MEN'S SHED mens 296C Salors Bay Road, l _ L^ NORTHBRDGE N.S.W 2063 The Wlkmghby Communty" NSTRUCTON MANUAL BENCH LATHE Before usng be sure to read ths manual carefully -C6- Safety nstructons
More informationCrimping Die Assemblies , , , , , , , , and 69653
Crimping Die Assemblies 46754-2, 46755-2, 46756-2, 46757-2, 46758-2, 46759-2, 46760-2, 59870-1, and 69653 Instruction Sheet 408-1602 10 NOV 16 Rev C 1. INTRODUCTION WIRE SIZE (MCM) (1) CMA (Circular Mil
More informationinstructions packaged with the tools or contact the Tooling Assistance Center number at the bottom of this page.
This instruction sheet provides instructions on product application, and maintenance and inspection procedures for SOLISTRAND Crimping Dies which are used in Crimping Heads 69097 and 69099. See Figure
More informationMULTIPOLE CONNECTORS SQUICH CN NEW SQUICH. Connections without tools reduced space SQUICH A TIMESAVER
SCREW CONNECTION ULTIPOLE CONNECTORS SQUICH CN SQUICH SQUICH Connectons wthout tools reduced space A TIESAVER SQUICH ULTIPOLE CONNECTORS SQUICH CN SQUICH seres Connectons wthout tools To mprove hgh performance
More informationSERVICE MANUAL
SERVCE MANUAL SEWNG MACHNE MODELS 11602090 12714090 TABLE OF CONTENTS. LOCATE AND DENTFY THE PARTS... 2. WND THE BOBBN... 3. PREPARE YOUR TOP THREAD..., STTCH SELECTOR/STTCH LENGTH CONTROLS... 4- & 4-2
More informationcurrent activity shows on the top right corner in green. The steps appear in yellow
Browzwear Tutorals Tutoral ntroducton Ths tutoral leads you through the basc garment creaton process usng an llustrated step by step approach. Each slde shows the actual applcaton at the stage of the acton
More informationRefer to Figure 2 and select the appropriate wire, die assembly, and terminal or splice. Strip the wire to the length indicated in the table.
The die assemblies consist of stationary dies (nests) and moving dies (anvils). Refer to Figure 2 to ensure the compatibility of die assemblies, crimping heads, and terminals and splices. The shanks on
More informationMICROWAVE HOOD COMBINATION INSTALLATIONINSTRUCTIONS
MICROWVE HOOD COMINTION INSTLLTIONINSTRUCTIONS Ths product s sutable for use above electrc or gas cookng products up to 36" (91.4 cm) wde. These nstallaton nstructons cover dfferent models. The appearance
More informationOCT 15 Rev E
ORIGINAL INSTRUCTIONS Coaxial Cable Stripper Kits 603995-[ ] Instruction Sheet 408-2766 09 OCT 15 Rev E PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered
More informationDynamic Optimization. Assignment 1. Sasanka Nagavalli January 29, 2013 Robotics Institute Carnegie Mellon University
Dynamc Optmzaton Assgnment 1 Sasanka Nagavall snagaval@andrew.cmu.edu 16-745 January 29, 213 Robotcs Insttute Carnege Mellon Unversty Table of Contents 1. Problem and Approach... 1 2. Optmzaton wthout
More informationTITLE ASSEMBLY DRAWING MTA - 5" APPROVALS DRAWN DATE
REV. DESCRPTON APPROVED A SEE DCN: 7762 0/29/200 ha k9, EXPRESS PROR WRTTEN CONSENT OF CELESCO TRANSDUCER PRODUCTS N( 20630 Plummer st Chatsworth, CA. 93 G MTA 5" E.GARCA 029200 SZE CODE DENT. NO DWG.
More informationHigh Current Pin and Socket Contacts 31 JUL 13 Rev C
Application Specification High Current Pin and Socket Contacts 31 JUL 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
More informationMICROWAVEHOODCOMBINATION INSTALLATIONINSTRUCTIONS
MCROWVEHOODCOMNTON NSTLLTONNSTRUCTONS Ths product s sutable for use above electrc or gas cookng products up to and ncludng 36" (91.4 cm) wde. See "nstallaton Requrements" secton for further notes. These
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63828-0200 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification
Order No. 63828-1200 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly
More information1. Actuate the upper die release button located in the C head or closed head. 2. Slide the nest into place in C head or closed head. See Figure 2.
The die assemblies consist of stationary dies (nests) and moving dies (anvils). The dies are retained in the crimp tool by retainer pins. Refer to the table in Figure 3 to ensure the compatibility of die
More informationOrder Number
Order Number 200218-5500 FEATURES Application Tooling Specification TYPE 4D A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly
More informationHow to Get Started with Virtual Goalie
How to Get Started wth Vrtual Goale HTC VIVE Set up your computer and moble devce Acqure a vrtual realty-enabled computer and the HTC Vve. For hardware specs, to test your computer, or to order from Amazon,
More informationInstruction Sheet Tool Kit [ ] (for SL Series 110 Jack Connectors)
Instruction Sheet Tool Kit 1725150 [ ] (for SL Series 110 Jack Connectors) 26 FEB 04 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
More informationC O N C E A L E D F I X I N G. PH:
C O N C E A L E D I X I N G D I Y S l a t Systems PH: 1300 336 237 Alumnum Concealed xng Slat Systems Our Concealed xng Alumnum Slat range offers the latest n archtectural style combned wth a unque nstall
More informationApplication Tooling Specification Sheet
Hand Crimp Tool Application Tooling Specification Sheet TYPE 4D Order No. 63819-0800 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification Sheet
Hand Crimp Tool Application Tooling Specification Sheet TYPE 4D Order No. 63819-1300 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification
Order No. 63819-0901 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly
More informationOrder Number
Order Number 200218-5900 FEATURES Application Tooling Specification TYPE 4D A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 200218-2400 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63825-8200 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification Sheet
Hand Crimp Tool FEATURES Application Tooling Specification Sheet Order No. 200218-2300 % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically designed soft handles % Precisely designed
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63827-7500 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0400 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63827-1400 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63825-8100 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationOnline Reporting. Online Reporting. A step-by-step guide. Important information for churches, schools and organisations
Onlne Reportng Onlne Reportng A step-by-step gude www.olr.ccl.com Important nformaton for churches, schools and organsatons May 2016 Reportng s a vtal part of beng a lcence holder... Reportng s a requrement
More informationApplication Tooling Specification
Order No. 200218-2200 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63811-8700 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63819-0300 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 200218-1700 A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationVS- 3 Hand Tool Kits , , and
VS- 3 Hand Tool Kits 244271-1, 244271-5, and 244271-6 Instruction Sheet 408-7280 Jan 2017 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0000 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationInstructions for Use. PetChatz.com. PetChatz.com
Instructons for Use PetChatz.com PetChatz.com POWER ON/OFF LED PET-SAFE MICROPHONE SOUND DETECTOR MANUAL TREAT RELEASE LOW TREAT LED LOW-LIGHT HD CAMERA for hgh-qualty vdeo MOTION DETECTION FULL-COLOR
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-1000 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationHAND CRIMP TOOL Specification Sheet Order No
HAND CRIMP TOOL Specification Sheet Order No. 63811-8200 FEATURES TYPE 4D A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0900 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationNordic - 2 Door Wardrobe
Nordc - 2 oor Wardrobe ssembly Instructons - lease keep for future reference 62967 mensons Wdth : 8. cm epth : 49,0 cm Heght : 9, cm Important - lease read these nstructons fully before startng assembly
More informationCustomer witness testing guide
Customer wtness testng gude Ths gude s amed at explanng why we need to wtness test equpment whch s beng connected to our network, what we actually do when we complete ths testng, and what you can do to
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0900 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationAbsco Space Saver Shed Assembly Instructions Model: 23081SK
Assembly Instructons Model: 2308SK FRONT BASE LENGTH: 2.26m SIDE BASE LENGTH: 0.78m FRONT WALL HEIGHT:.80m REAR WALL HEIGHT:.95m CONCRETE SLAB 880mm 2360mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63819-0100 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationAbsco Space Saver Shed Assembly Instructions Model: J30082S
Assembly Instructons FRONT BASE LENGTH: 9ft-0-7 64n SIDE BASE LENGTH: ft-6-45 64n FRONT WALL HEIGHT: 5ft-0-55 64n REAR WALL HEIGHT: 6ft-4-49 64n ft-0-4 64n CONCRETE SLAB 0ft--3 64n CONCRETE SLAB WHEN LAYING
More information