C O N C E A L E D F I X I N G. PH:

Size: px
Start display at page:

Download "C O N C E A L E D F I X I N G. PH:"

Transcription

1 C O N C E A L E D I X I N G D I Y S l a t Systems PH:

2 Alumnum Concealed xng Slat Systems Our Concealed xng Alumnum Slat range offers the latest n archtectural style combned wth a unque nstall system that make any job a breeze. Our powder coated slats wll not rust, warp or requre repantng & offer a cost effectve alternatve to hgh mantenance tmber screens. CONCEALED IXING SYSTEM Our unque concealed fxng system covers unsghtly screws for the perfect fnsh 900 x 1750mm WELDED GATES IN STOCK Avalable n 65 or 90mm 8mm spacngs Desgned to algn perfectly wth your DIY slat panels Custom Gates avalable on request In Stock Colours Our Alumnum Slat Prvacy system s also avalable n any of our Standard Powder Coatng range from Interpon. NB: These colour swatches are meant as a gude only DIY GATE KITS Adjustable DIY Gate Kts allow you to ft any job any tme. SATIN BLACK BL PALLADIUM SILVER SI SURMIST SM WOODLAND GREY WG MONUMENT MO JASPER JA SHALE GREY SG IRONSTONE IR PRIMROSE PR DUNE DU Red Cedar RC Manor Red* MR *Red Cedar Cappng and Perpherals Only Avalable n 65 or 90mm Slats Inc. all fttngs Care Instructons & Warranty: Exposure to UV Lght, polluton, salt deposts and chemcals can affect the long term performance of the fencng coatng f not removed wth regular washng. A gentle monthly clean wth a soft brush, warm water and mld detergent followed by a rnse of fresh water wll mantan the fnsh of both powdercoated, Colorbond and stanless steel fencng components and fulfll warranty condtons. Year Warranty Condtons Apply Dsclamer: Drawngs not to scale. Whle all care s taken n the producton of ths DIY (do t yourself) gude t s provded as an ndcatve nstallaton gude only. The seller or manufactureer are not lable or responsble for the outcome of any nstallaton usng ths gude. Copyrght All rghts are reserved n relaton to ths matter.

3 H Channel Post & U-Channel Install B J I Concealed xng Post Optons 1-Way (VS5035) A G E D C 2-Way (VS5040) U-Channel (VS5015) Cut Slats down to 10 - less than ths openng Channel Post xng 65 or 90mm Slat U-Channel xng Snap On xng Cover Ensure long leg sts on nsde of screen Centre Support Mullon xng Self-Tappng Tek Screw Corner Post Setup U-Channel fxed to 1-Way Post A Slats - 65 x 16mm (VS5005) or 90 x 16mm (VS5010) Snap-On xng Cover (VS5025) B 1-Way Concealed xng Post (VS5035) G Centre Mullon (VS5020) C Concealed xng U Channel (VS5015) H 50 x 50mm Post Cap - P/C Al (VS5090) or Plastc (VS5075) D In Post Spacers* - ; ; (VS5050; VS5055; VS5060) *Optonal I U-Channel Cap - P/C Al (VS5080) or Plastc (VS5065) E 10-16*16mm Self Tappng Tek Screw (HW5000) J Centre Mullon Cap - P/C Al (VS5085) or Plastc (VS5070) 1 Post Holes & Post/U-Channel Install 2 Slat Install Measure and mark post hole postons, accordng to the below dagram. Dg post holes along strng lne; 600mm deep x 200mm n dameter. Posts wll st approxmately 500mm nto the holes. or U-Channel scenaro, fx U-Channel to structure usng materal approprate fxngs. Ensure you use a relatvely flat head fxng so they won t foul the slats when they are nserted nto the U-Channel. U-Channel* *fx usng relatvely flat head fxngs 2-Way Panel Span Slat Lengths = Openng mnus 10-1-Way Gate Span Recommended Post Centres = Gate Wdth + 75mm* Cut Slat lengths 10- short of the spacng between post/wall openngs. Install Slats & Spacers startng at the bottom slat usng 2 x Tek screws (HW5000) per Slat (1 per sde). Only push n spacers half way - you wll nsert them fully once fxng cover s nstalled. Contnue up the panel untl the last slat s flush wth top of the post. If usng a Centre Mullon (VS5020) for larger panel wdths (1800mm and over), centre t and screw t off to each slat. Clp n Snap On xng Cover (VS5025) for posts and centre mullons & push n all spacers frmly. Insert all caps 600 x 200mm 50 x 50 Post centres = Cut Slat Lengths mm *dependent on gate hardware

4 G H Louvred Slat Panels & Gates D E A B C Channel Post xng Cut Slats down to 56mm less than ths openng 65mm Slat Only U-Channel xng Slat Louvre Brackets Snap On xng Cover Ensure long leg sts on nsde of screen Self-Tappng Tek Screw 1 Louvred Slat Install Left Hand Rght Hand A B C D E G H Slats - 65 x 16mm only (VS5005) Slat Louvre Bracket - LHS (VS5095) Slat Louvre Bracket - RHS (VS5100) 1-Way Concealed xng Post (VS5035) Concealed xng U Channel (VS5015) Snap-On xng Cover (VS5025) 50 x 50mm Post Cap - P/C Al (VS5090) or Plastc (VS5075) U-Channel Cap - P/C Al (VS5080) or Plastc (VS5065) Cut Slat lengths 56mm shorter than the openng between post/wall (6mm shorter than the dstance between the U channels). Insert Louvre brackets nto ether end of your slats, tappng them n frmly wth a rubber mallet. NB: Please note that there are Left hand (VS5095) and Rght hand (VS5100) brackets for each sde of the slat. Install Louvred Slats nto Posts or U-Channel startng at the bottom slat usng 2 x Tek screws (HW5000) per Slat (1 per sde). Contnue up the panel untl the last slat s flush wth top of the post. Clp n Snap On Covers (VS5025) for Posts/U-Channels. Insert all caps. You can create DIY Louvred Gates usng 1-way posts, 65mm Slats and our louvred brackets. Smply use 2 screws per bracket per sde (4 screws per slat).

5 Kt Contents 65mm SLAT DIY Gate Kt COMPONENT QTY A 65 x 16mm 900mm 24 B 1-Way Concealed xng 1800mm 2 C Concealed xng Snap On 1800mm 2 D In-Post Spacers - 50 Pack 1 E In-Post Spacers - 50 Pack 1 In-Post Spacers - 50 Pack 1 G Self Tappng Screws - 50 Pack 2 H 50 x 50mm Post Cap 2 I Concealed U-Channel Cap 2 Slat QTY Slat Spacngs Gate Heght Gude mm Hgh Hgh mm Hgh 1745mm Hgh mm Hgh 1665mm Hgh 1785mm Hgh 1490mm Hgh 1585mm Hgh 1680mm Hgh 14 Hgh 1505mm Hgh 1595mm Hgh 1340mm Hgh 1425mm Hgh 15 Hgh 1265mm Hgh 1345mm Hgh 1425mm Hgh 1190mm Hgh 1265mm Hgh 1340mm Hgh 11 Hgh 1185mm Hgh 1255mm Hgh 1040mm Hgh 1105mm Hgh 1170mm Hgh 2 Slat Gate Install Gate Span = Gate Openng - Hnge & Latch allowances (Dependent on specfc Hnge and Lock beng used) If you requre a custom wdth gate less than 1000mm, you wll need to cut down the slats to sut: Slat length = Requred Gate Span mnus 100mm. Install Slats & Spacers startng wth the bottom spacer usng 4 x Tek screws (HW5000) per Slat (2 per sde). Only push n spacers half way - you wll nsert them fully once fxng cover s nstalled. Contnue up the panel untl the last slat s flush wth top of the post. Clp n Snap On xng Cover (VS5025) for posts & push n all spacers frmly Insert all caps

6 Kt Contents 90mm SLAT DIY Gate Kt COMPONENT QTY A 90 x 16mm 900mm 18 B 1-Way Concealed xng 1800mm 2 C Concealed xng Snap On 1800mm 2 D In-Post Spacers - 50 Pack 1 E In-Post Spacers - 50 Pack 1 In-Post Spacers - 50 Pack 1 G Self Tappng Screws - 50 Pack 2 H 50 x 50mm Post Cap 2 I Concealed U-Channel Cap 2 Slat QTY Slat Spacngs Gate Heght Gude 1800mm Hgh mm Hgh 1770mm Hgh mm Hgh mm Hgh 1740mm Hgh 1500mm Hgh mm Hgh 1630mm Hgh 1400mm Hgh mm Hgh 15 Hgh 2 Slat Gate Install mm Hgh 1350mm Hgh Gate Span = Gate Openng - Hnge & Latch allowances (Dependent on specfc Hnge and Lock beng used) 14 Hgh 1200mm Hgh If you requre a custom wdth gate less than 1000mm, you wll need to cut down the slats to sut: mm Hgh Slat length = Requred Gate Span mnus 100mm mm Hgh 1100mm Hgh 1140mm Hgh Install Slats & Spacers startng wth the bottom spacer usng 4 x Tek screws (HW5000) per Slat (2 per sde). Only push n spacers half way - you wll nsert them fully once fxng cover s nstalled mm Hgh 1000mm Hgh 1035mm Hgh 1080mm Hgh Contnue up the panel untl the last slat s flush wth top of the post. Clp n Snap On xng Cover (VS5025) for posts & push n all spacers frmly Insert all caps

SPECIFICATION SHEETS PRE-FABRICATED ALUMINIUM SLAT SYSTEM

SPECIFICATION SHEETS PRE-FABRICATED ALUMINIUM SLAT SYSTEM SPECIFICATION SHEETS ALUMINIUM SLAT SYSTEM 38/65/90 x 16mm Slats @ specfed spacngs SLAT OptonS 90 x 16 x 1.4mm Alumnum Slat 65 x 16 x 1.4mm Alumnum Slat 38 x 16 x 1.4mm Alumnum Slat Heght LENGTHS: Avalable

More information

SPECIFICATION SHEETS PRE-FABRICATED ALUMINIUM SLAT SYSTEM

SPECIFICATION SHEETS PRE-FABRICATED ALUMINIUM SLAT SYSTEM SPECIFICATION SHEETS ALUMINIUM SLAT SYSTEM 38/65/90 X 16MM SLATS @ SPECIFIED SPACINGS SLAT OPTIONS 90 x 16 x 1.4mm Alumnum Slat 65 x 16 x 1.4mm Alumnum Slat 38 x 16 x 1.4mm Alumnum Slat HEIGHT LENGTHS:

More information

SPECIFICATION SHEETS. ALUMINIUM pool fencing

SPECIFICATION SHEETS. ALUMINIUM pool fencing SPECIFICATION SHEETS ALUMINIUM pool fencing PANELS - 6063 T6 Alumnum 1 Panel - Powdercoated 38 25m 1.6mm RHS 16mm CHS (1.2mm) Vertcal Tubes 38 25mm Horzontal Fence Brackets 2 Hole - Sngle Lugged 3 12-14*20

More information

Absco Space Saver Shed Assembly Instructions Model: J30082S

Absco Space Saver Shed Assembly Instructions Model: J30082S Assembly Instructons FRONT BASE LENGTH: 9ft-0-7 64n SIDE BASE LENGTH: ft-6-45 64n FRONT WALL HEIGHT: 5ft-0-55 64n REAR WALL HEIGHT: 6ft-4-49 64n ft-0-4 64n CONCRETE SLAB 0ft--3 64n CONCRETE SLAB WHEN LAYING

More information

Absco Workshop Shed Model: 45302WK

Absco Workshop Shed Model: 45302WK Absco Workshop Shed Model: FRONT: 4.48m SIDE: 3.0m HEIGHT: 2.m CONCRETE SLAB 300mm 4580mm CONCRETE WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 25mm DEEP AROUND THE PERIMETER 00mm REBATED

More information

Nordic - 2 Door Wardrobe

Nordic - 2 Door Wardrobe Nordc - 2 oor Wardrobe ssembly Instructons - lease keep for future reference 62967 mensons Wdth : 8. cm epth : 49,0 cm Heght : 9, cm Important - lease read these nstructons fully before startng assembly

More information

FEATHER LODGE BASE CABINET ASSEMBLY GUIDE

FEATHER LODGE BASE CABINET ASSEMBLY GUIDE FETHER LODGE SE CINET SSEMLY GUIDE WELCOME TO FETHER LODGE CINETS Thank you for purchasng Feather Lodge cabnets. You are on your way to a beautful, new ktchen, vanty, or closet. There are a few smple tools

More information

Nordic - 2 Door 2 Drawer Tallboy

Nordic - 2 Door 2 Drawer Tallboy Nordc - oor rawer allboy ssembly Instructons - lease keep for future reference 66390 mensons Wdth : 8. cm epth : 49,0 cm Heght : 5,9 cm Important - lease read these nstructons fully before startng assembly

More information

2E - 3E High Wind Kit Manual

2E - 3E High Wind Kit Manual Yag Dpole Vertcal (Patent# 6,677,914 E - 3E Hgh Wnd Kt Manual Antarctca at 7 mph SteppIR Antennas 11-116th Ave NE, Sute -, Bellevue, WA 984 Tel: 4-43-191 Fax: 4-46-441 Tech Support: 4-891-6134 www.steppr.com

More information

Nordic - 2 Door Wardrobe

Nordic - 2 Door Wardrobe Nordc - oor Wardrobe ssembly Instructons - lease keep for future reference 4457 mensons Wdth :. cm epth : 49,0 cm Heght : 9, cm Important - lease read these nstructons fully before startng assembly If

More information

Insertion/Extraction Tool and Replacement Tip Kits [ ]

Insertion/Extraction Tool and Replacement Tip Kits [ ] Inserton/Extracton Tool 91285-1 and Replacement Tp Kts 543382-[ ] Instructon Sheet 408-9404 19 JUN 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered

More information

Locator Pin Indexing Pin. Wire Size Marking CAUTION NOTE TOOLING ASSISTANCE CENTER PRODUCT INFORMATION

Locator Pin Indexing Pin. Wire Size Marking CAUTION NOTE TOOLING ASSISTANCE CENTER PRODUCT INFORMATION ROTA-CRIMP* Crmpng Tool Instructon Sheet 408-2681 68321-1 13 APR 12 Statonary De (Nest) Anvl De Hold-Down Devce and Contact Locator Front of Tool Locator Pn Indexng Pn Wre Sze Markng The hold-down devce

More information

Premier Garden Shed Assembly Instructions Model: J30232GK

Premier Garden Shed Assembly Instructions Model: J30232GK Assembly Instructons Model: J303GK 360mm (7.7") CONCRETE SLAB 300mm (0.7'') FRONT: 3.0m (9.84") SIDE:.6m (7.4") HEIGHT:.m (6.88") WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 0mm

More information

Scandi - 2 Door 2 Drawer Tallboy

Scandi - 2 Door 2 Drawer Tallboy cand - oor rawer allboy ssembly Instructons - lease keep for future reference odel 3630035 3630035 olour no. roduct catalogue number 0 0 050 00 olour ne Whte mensons Wdth :, cm epth : 49,0 cm Heght : 5,9

More information

PRO-CRIMPER* III Hand Crimping Tool Assembly and Die Assemblies [ ]

PRO-CRIMPER* III Hand Crimping Tool Assembly and Die Assemblies [ ] PRO-CRIMPER* III Hand Crmpng Tool Assembly 58546-1 and De Assembles 58545-[ ] Instructon Sheet 408-8678 13 MAR 14 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Frameless Glass Balustrade Systems

Frameless Glass Balustrade Systems Frameless Glass Balustrade Systems Frameless Glass Balustrade Systems i fg1 - systems Spigot Fixed Glass with Toprail OPTIONS B Toprail & Accessories A Glass Panel C Spigot Posts i fg2 - systems Spigot

More information

Absco Space Saver Shed Assembly Instructions Model: 23081SK

Absco Space Saver Shed Assembly Instructions Model: 23081SK Assembly Instructons Model: 2308SK FRONT BASE LENGTH: 2.26m SIDE BASE LENGTH: 0.78m FRONT WALL HEIGHT:.80m REAR WALL HEIGHT:.95m CONCRETE SLAB 880mm 2360mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm

More information

Nordic - Overbed fitment

Nordic - Overbed fitment Nordc - Overbed ftment ssembly Instructons - lease keep for future reference 144794 mensons Wdth : 248,9 cm epth : 49,0 cm Heght : 191,3 cm Important - lease read these nstructons fully before startng

More information

Absco Premier Garden Shed Assembly Instructions Model: 30302GK

Absco Premier Garden Shed Assembly Instructions Model: 30302GK Absco Premer Garden Shed Assembly Instructons FRONT: 3.0m SIDE: 3.0m HEIGHT:.m 300mm CONCRETE SLAB 300mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 0mm. 50mm 0mm 50mm THIS WILL

More information

Absco Regent Garden Shed Assembly Instructions Model: 30372RK

Absco Regent Garden Shed Assembly Instructions Model: 30372RK Shed Assembly Instructons Model: 3037RK FRONT: 3.0m SIDE: 3.66m HEIGHT:.m 3760mm CONCRETE SLAB 300mm CONCRETE WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 5mm DEEP AROUND THE PERIMETER

More information

Utility Knives & Blades

Utility Knives & Blades www.rwn.com.au Utlty Knves & s IRWIN Revolutonses Tradtonal Utlty s In 2003, IRWIN revolutonsed tradtonal utlty blades wth the release of B-Metal technology. As the name mples, B-Metal blades are produced

More information

Absco Workshop Shed Model: 45232WK

Absco Workshop Shed Model: 45232WK FRONT: 4.48m SIDE:.6m HEIGHT:.00m CONCRETE SLAB 360mm 4580mm CONCRETE WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 5mm DEEP AROUND THE PERIMETER 00mm REBATED EDGE CONCRETE SLAB THIS WILL

More information

ph fax

ph fax www.customron.com ph 800.732.7699 fax 507.732.7837 Balusters, pckets, spndles these are the bones of a star ralng system. At Custom Iron, we commonly refer to these as balusters. And, uncommonly, we nvent

More information

Absco Industries Workshop Shed Model: 60303WK

Absco Industries Workshop Shed Model: 60303WK FRONT: 5.96m SIDE: 3.00m HEIGHT:.0m CONCRETE SLAB 300mm 6060mm WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 5mm DEEP AROUND THE PERIMETER THIS WILL HELP WATER EGRESS FROM THE BASE OF

More information

PRO- CRIMPER* III Hand Crimping

PRO- CRIMPER* III Hand Crimping PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 91338-1 408-8377 wth De Assembly 91338-2 22 JUL 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Instructions for Use. PetChatz.com. PetChatz.com

Instructions for Use. PetChatz.com. PetChatz.com Instructons for Use PetChatz.com PetChatz.com POWER ON/OFF LED PET-SAFE MICROPHONE SOUND DETECTOR MANUAL TREAT RELEASE LOW TREAT LED LOW-LIGHT HD CAMERA for hgh-qualty vdeo MOTION DETECTION FULL-COLOR

More information

ASPEN STYLE. ORNAMENTAL GATE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. EGBR5842-N2P

ASPEN STYLE. ORNAMENTAL GATE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. EGBR5842-N2P 1 ASPEN STYLE ORNAMENTAL GATE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. EGBR5842-N2P INSTALLATION VIDEO AVAILABLE AT: video01.xcelfence.com Item Description Gate installation and assembly

More information

PRO- CRIMPER* III Hand

PRO- CRIMPER* III Hand PRO- CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 90759-1 408-9962 wth De Assembly 90759-2 03 MAY 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO-CRIMPER* III Hand Crimping Tool Assembly with Die AssemblY

PRO-CRIMPER* III Hand Crimping Tool Assembly with Die AssemblY PRO-CRIMPER* III Hand Crmpng Tool Assembly 90758-1 wth De AssemblY 90758-2 Instructon Sheet 408-9938 01 NOV 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER* III Hand Crimping

PRO- CRIMPER* III Hand Crimping PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool 58448-2 408-9357 Wth De 58448-3 10 Mar 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand

More information

PRO- CRIMPER* III Hand Crimping

PRO- CRIMPER* III Hand Crimping PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 58641-1 wth 408-4379 De Assembly 58641-2 18 JUN 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Absco EZISLIM Shed Model: 08151F

Absco EZISLIM Shed Model: 08151F FRONT: 0.78m SIDE: 1.52m HEIGHT: 1.80m CONCRETE SLAB 1620mm 880mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 10mm. 50mm 10mm 50mm THIS WILL ENSURE THAT WATER RUN OFF IS KEPT CLEAR

More information

PRO-CRIMPER* III Hand Tool Assembly with Die Assembly

PRO-CRIMPER* III Hand Tool Assembly with Die Assembly PRO-CRIMPER* III Hand Tool Assembly 2063778-1 wth De Assembly 2063778-2 Instructon Sheet 408-10290 02 FEB 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

How to Get Started with Virtual Goalie

How to Get Started with Virtual Goalie How to Get Started wth Vrtual Goale HTC VIVE Set up your computer and moble devce Acqure a vrtual realty-enabled computer and the HTC Vve. For hardware specs, to test your computer, or to order from Amazon,

More information

PRO- CRIMPER III Hand Crimping Tool Assembly DESCRIPTION (Figures 1 and 2)

PRO- CRIMPER III Hand Crimping Tool Assembly DESCRIPTION (Figures 1 and 2) PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 58495-1 408-9819 Wth De Assembly 58495-2 22 JUL 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER III Hand Crimping Tool Assembly INSTALLATION AND REMOVAL OF DIE SET AND LOCATOR ASSEMBLY (Figure 2)

PRO- CRIMPER III Hand Crimping Tool Assembly INSTALLATION AND REMOVAL OF DIE SET AND LOCATOR ASSEMBLY (Figure 2) PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 90547-1 wth 408-9884 De Assembly 90547-2 02 NOV 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

onlinecomponents.com

onlinecomponents.com PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 58535-1 wth 408-4021 De Assembly 58535-2 29 JUL 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Hand Crimping Tool (For Insulated Heat Shrink Splices)

Hand Crimping Tool (For Insulated Heat Shrink Splices) Hand Crmpng Tool 607949-1 (For Insulated Heat Shrnk Splces) Instructon Sheet 408-4087 23 JAN 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand

More information

Product Information. Jaw quick-change system BSWS-PGZN-plus

Product Information. Jaw quick-change system BSWS-PGZN-plus Product Informaton BSWS-PGZN-plus BSWS-PGZN-plus Productve. Flexble. Cost-effectve. BSWS jaw quck-change system The BSWS jaw quck-change system allows top jaws to be changed on the grpper manually and

More information

MCP 2.8 mm Contact System and Wire Seal for 1P Starter Motor Connectors

MCP 2.8 mm Contact System and Wire Seal for 1P Starter Motor Connectors MCP 2.8 mm Contact System and Wre Seal for 1P Starter Motor Connectors Applcaton Specfcaton 114-13295 05 MAY 11 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n

More information

Instruction Sheet ROTA- CRIMP* Hand Crimping Tools and

Instruction Sheet ROTA- CRIMP* Hand Crimping Tools and Instructon Sheet ROTA- CRIMP* Hand Crmpng Tools 08-09 6007 and 6007- APR PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are

More information

PRO- CRIMPER* III Hand

PRO- CRIMPER* III Hand PRO- CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 58529-1 408-9999 wth De Assembly 58529-2 11 AUG 14 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Screening extrusions

Screening extrusions Screening extrusions Interpon D1000 powdercoat colour guide B Black (Satin) GN150A S Palladium Silver GY184C MN Monument (Matt) GL229A SM Surfmist (Matt) GA236A G Woodland Grey (Matt) GL205A M Mill finish

More information

Instruction Sheet AMPMODU* MTE CONNECTORS Mar 11 Rev A

Instruction Sheet AMPMODU* MTE CONNECTORS Mar 11 Rev A Instructon Sheet AMPMODU* MTE CONNECTORS 408-6919 10 Mar 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are ntended for

More information

PRO- CRIMPER* III Hand

PRO- CRIMPER* III Hand PRO- CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 90684-1 408-9934 wth De Assembly 90684-2 09 OCT 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO-CRIMPER* III Hand Crimping Tool Assembly with Die Assembly

PRO-CRIMPER* III Hand Crimping Tool Assembly with Die Assembly PRO-CRIMPER* III Hand Crmpng Tool Assembly 90548-1 wth De Assembly 90548-2 Instructon Sheet 408-9885 02 NOV 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

laser cut screens oxworks.com.au

laser cut screens oxworks.com.au laser cut screens 1300 336 237 oxworks.com.au laser cut screen Designs Designs may vary slightly for different sized screens. Oxworks brand new range of Laser Cut Decorative Screens will bring style and

More information

Meredith Sinclair s DIY Clothespin Xmas Tree

Meredith Sinclair s DIY Clothespin Xmas Tree 1.Mer ed t hs nc l a r sdi YCl ot hes p nxma st r ee 2.DI YChr s t ma ss poons 3.DI YChr s t ma sca ndl ecent er p ec e Meredth Snclar s DIY Clothespn Xmas Tree Materals: Clothespns of varous szes, old

More information

Instruction Sheet SDE- SA Hand Tool Assembly with Die Assembly

Instruction Sheet SDE- SA Hand Tool Assembly with Die Assembly Instructon Sheet 408-10002 wth De Assembly 1752938-2 06 APR 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are ntended for

More information

SDE PEW- 12 Hand Tool

SDE PEW- 12 Hand Tool SDE PEW- 12 Hand Tool Instructon Sheet Assembly 2063956-1 wth 408-10370 De Assembly 2063956-2 07 OCT 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered

More information

Connector Assemblies 06 JUN 11 Rev C

Connector Assemblies 06 JUN 11 Rev C Applcaton Specfcaton Power Seres 50 114-13071 Connector Assembles 06 JUN 11 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and nches]. Unless otherwse

More information

current activity shows on the top right corner in green. The steps appear in yellow

current activity shows on the top right corner in green. The steps appear in yellow Browzwear Tutorals Tutoral ntroducton Ths tutoral leads you through the basc garment creaton process usng an llustrated step by step approach. Each slde shows the actual applcaton at the stage of the acton

More information

Absco Pool Pump Cover Assembly Instructions Model: PPCK

Absco Pool Pump Cover Assembly Instructions Model: PPCK Cover Assembly Instructons Model: PPCK EXTERNAL BASE DIMENSIONS: 520mm x 520mm EXTERNAL REAR WALL HEIGHT: 490mm EXTERNAL FRONT WALL HEIGHT: 220mm RECOMMENDED CONCRETE SLAB SIZE: 620mm x 620mm x 00mm THICK

More information

Organic Garden Co. Aviary Assembly Instructions Model: AOGC15081FKFD

Organic Garden Co. Aviary Assembly Instructions Model: AOGC15081FKFD Assembly Instructons Model: AOGC508FKF FRONT:.52m SIE : 0.78m HEIGHT:.8m CONCRETE SLAB 880 620mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EGES OWNWARS BY 0mm. 50mm 0mm 50mm THIS WILL ENSURE THAT

More information

ASPEN STYLE. ORNAMENTAL FENCE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. NBR7958-NPF

ASPEN STYLE. ORNAMENTAL FENCE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. NBR7958-NPF 1 ASPEN STYLE ORNAMENTAL FENCE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. NBR7958-NPF INSTALLATION VIDEO AVAILABLE AT: video01.xcelfence.com Item Description Fence installation and assembly

More information

Absco Aviary Assembly Instructions Model: AOGC15151F

Absco Aviary Assembly Instructions Model: AOGC15151F Absco Avary Assembly Instructons FRONT:.52m SIE :.48m HEIGHT:.8m 580 CONCRETE SLAB 620mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EGES OWNWARS BY 0mm. 50mm 0mm 50mm THIS WILL ENSURE THAT WATER

More information

laser cut screens oxworks.com.au

laser cut screens oxworks.com.au laser cut screens 1300 336 237 oxworks.com.au laser cut screen Designs Designs may vary slightly for different sized screens. Oxworks range of Laser Cut Decorative Screens will bring style and modern luxury

More information

Oxford Stalls Installation Instructions

Oxford Stalls Installation Instructions Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or

More information

MICROWAVE HOOD COMBINATION INSTALLATIONINSTRUCTIONS

MICROWAVE HOOD COMBINATION INSTALLATIONINSTRUCTIONS MICROWVE HOOD COMINTION INSTLLTIONINSTRUCTIONS Ths product s sutable for use above electrc or gas cookng products up to 36" (91.4 cm) wde. These nstallaton nstructons cover dfferent models. The appearance

More information

Absco Aviary Assembly Instructions Model: A15301FK

Absco Aviary Assembly Instructions Model: A15301FK Absco Avary Assembly Instructons Model: A15301FK FRONT: 1.52m SIE : 2.96m HEIGHT: 1.8m 3060mm CONCRETE SLAB 1620mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EGES OWNWARS BY 10mm. 50mm 10mm 50mm

More information

PRO-CRIMPER* III Hand. with Die Assembly OCT 11 Rev C. Pivot Pin. Die Assembly Moving Jaw CONTACT FAMILY SIZE (AWG)

PRO-CRIMPER* III Hand. with Die Assembly OCT 11 Rev C. Pivot Pin. Die Assembly Moving Jaw CONTACT FAMILY SIZE (AWG) PRO-CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 58514-1 408-9973 wth De Assembly 58514-2 12 OCT 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

laser cut Screen DESIGNS

laser cut Screen DESIGNS SPECIFICATION SHEETS laser cut Screen DESIGNS Desgns may vary for dfferent szed screens. otherwse specfed. Sldng gates have a 50m desgn border wth 100mm on the bottome to cater for the sldng gate frame.

More information

Shur-Plug*.156 Diameter Terminals and Receptacle Contacts

Shur-Plug*.156 Diameter Terminals and Receptacle Contacts Shur-Plug*.156 Dameter Termnals and Receptacle Contacts Applcaton Specfcaton 114-2042 07 NOV 12 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and

More information

Preparation 1 INSTALLATION INFORMATION

Preparation 1 INSTALLATION INFORMATION Preparaton 1 Pergo wood floorng materals are delvered wth nstructons n the form of llustratons. The texts below s coverng a floatng llustraton n regards of a floatng nstallaton, and are dvded n 3 areas:

More information

PATENTED NO WELD SYSTEM!

PATENTED NO WELD SYSTEM! PATENTED NO WELD SYSTEM! Patented no weld aluminium batten system Various batten sizes snap onto simple fixing clip Fit to face of walls and ceilings or between pillars or posts Cut to size system with

More information

ALUMINIUM & WIRE SYSTEMS DISTRIBUTORS TO TRADE ONLY BRISBANE GOLD COAST MELBOURNE NORTH MELBOURNE SOUTH EAST ADELAIDE

ALUMINIUM & WIRE SYSTEMS DISTRIBUTORS TO TRADE ONLY BRISBANE GOLD COAST MELBOURNE NORTH MELBOURNE SOUTH EAST ADELAIDE V4 ALUMINIUM & WIRE SYSTEMS DISTRIBUTORS TO TRADE ONLY BRISBANE GOLD COAST MELBOURNE NORTH MELBOURNE SOUTH EAST ADELAIDE WWW.GLASSOUTLET.COM.AU ADVANTAGES OF DOING BUSINESS WITH GLASS OUTLET TRADE ONLY

More information

INSTRUCTION MANUAL BENCH LATHE

INSTRUCTION MANUAL BENCH LATHE WLLOUGHBY COMMUNTY MEN'S SHED mens 296C Salors Bay Road, l _ L^ NORTHBRDGE N.S.W 2063 The Wlkmghby Communty" NSTRUCTON MANUAL BENCH LATHE Before usng be sure to read ths manual carefully -C6- Safety nstructons

More information

Fortress Railing Overview ACTUAL FREIGHT CHARGES APPLY TO ALL FORTRESS RAIL ORDERS

Fortress Railing Overview ACTUAL FREIGHT CHARGES APPLY TO ALL FORTRESS RAIL ORDERS Fortress Railing Overview 4 3 1 Fe 26 Iron Railing Systems Fortress Use the steps below for the following pages to complete your rail Vertical Cable and Glass Options Available Fortress Iron Railing System

More information

Cabinet doors, made with the same excellence that Cabinet Doors and More has become known for with its other quality wood products.

Cabinet doors, made with the same excellence that Cabinet Doors and More has become known for with its other quality wood products. Introducng Slhouette DoorS Cabnet doors, made wth the same excellence that Cabnet Doors and More has become known for wth ts other qualty wood products. Our msson s to supply wood products that exceed

More information

Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Top Support Kit: (x2) - 2 Top Supports. Quantities are per bench

Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Top Support Kit: (x2) - 2 Top Supports. Quantities are per bench Parts Included (per back to back bench) Column Kit: (x2) - 1 LH & 1 RH Column - Control Box - Hand Switch Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Depth Support Kit: -

More information

#11178 Providence ARBOR

#11178 Providence ARBOR #11178 Providence ARBOR ASSEMBLY INSTRUCTIONS TOOLS NEEDED Drill with #2 Phillips Bit (recommended) or Phillips Screwdriver Ruler Hammer or Mallet ARBOR TOP ASSEMBLY (Refer to Drawing 1) (Make 2) On clean

More information

1. REVIEW 2. DELIVERY SET

1. REVIEW 2. DELIVERY SET power status ON steps DIP test reset ON DIP off modes lght sensor / led sensor speed on sensor 2 speed off on/off delay pause to off REVIEW LED lghtng devce s desgned for automatc lghtng of starway steps

More information

Terminating Tools

Terminating Tools Termnatng Tools 2-231652- 5 Instructon Sheet and 2-231652- 9 for 408-9770 DEConnect Modular Plugs 29 NOV 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Gripping force, O.D. gripping. Gripping force, I.D. gripping

Gripping force, O.D. gripping. Gripping force, I.D. gripping Grppng force, O.D. grppng Fnger load Grppng force Grppng force, I.D. grppng Grppng force Fnger length M x max. 80 Nm M y max. 115 Nm M z max. 70 Nm F z max. 2000 N Fnger length The ndcated moments and

More information

Pneumatic Power Bench Assembly

Pneumatic Power Bench Assembly Pneumatc Power Bench Assembly 58338-1 Instructon Sheet 408-9393 09 AUG 11 Fgure 1 1. INTRODUCTION Pneumatc Power Bench Assembly 58338-1 s a pneumatc power unt desgned to accept a varety of nterchangeable

More information

SPECIFICATION SHEETS. DOUBLE Gate SETUPS

SPECIFICATION SHEETS. DOUBLE Gate SETUPS SPECIFICATION SHEETS DOUBLE Gate SETUPS Hi-Performance Hardware DOUBLE gate aluminium frame 38 x 25mm; 40 x 40mm; 50 x 50mm shs Frame Dependent on Gate Size D & D technologies self-closing hinges genuine

More information

OSCA Vermiculture Compost System

OSCA Vermiculture Compost System OSCA Vermculture Compost System 3.0 Constructon Plans: 3.1 General Gudelnes A detaled parts lst for each component of the OSCR compost system appeats n Appendx B, Table B-9. Use wood glue on all contact

More information

Architectural Excellence. El Centro Cultural Perelló Santo Domingo, Dominican Republic

Architectural Excellence. El Centro Cultural Perelló Santo Domingo, Dominican Republic Architectural Excellence El Centro Cultural Perelló Santo Domingo, Dominican Republic El Centro Cultural Perelló nterior & Exterior Sign Program Exterior signage consisted of Stainless Steel and Glass

More information

Preparation INSTALLATION INFORMATION

Preparation INSTALLATION INFORMATION Preparaton 1 Pergo domestc Elegance s delvered wth nstructons n the form of llustratons. The texts below provde explanatons for the llustratons, and are dvded n three areas: Preparaton, Installaton and

More information

Design Data 20M. Circular Precast Concrete Manholes

Design Data 20M. Circular Precast Concrete Manholes Desgn Data 20M Crcular Precast Concrete Manholes Crcular precast concrete manhole sectons are versatle n the constructon of bured structures; they may be used as catch basns for stormwater dranage, manholes

More information

Assembly Instructions

Assembly Instructions Laminate/Phenolic & 1 Pc Butcherblock Tops Before you begin, please make sure all parts and proper quantities are included. (See on next page) Any parts damaged during shipment must be reported within

More information

Product Information. Universal gripper JGZ

Product Information. Universal gripper JGZ Product Informaton Unversal grpper JGZ JGZ Unversal grpper Loadable. Relable. Compact. JGZ unversal grpper Unversal 3-fnger centrc grpper of the compact class wth T-slot gudance and best cost-performance

More information

SMD Common Mode Filter for Signal Line. PRODUCT IDENTIFICATION 2012 F P - E under development. (1) (2) (3) (4) (5) (6) APPLICATIONS

SMD Common Mode Filter for Signal Line. PRODUCT IDENTIFICATION 2012 F P - E under development. (1) (2) (3) (4) (5) (6) APPLICATIONS Motocraft SMD Common Mode Flter for Sgnal Lne CMF2012F Seres (Sheldng Type) FEATURES Ths common mode flter s characterzed by ts small szed Hghly effectve n nose suppresson,hght common mode mpedance at

More information

PRE-ENGINEERED HORSE STALL SYSTEMS SDFD SLIDING DOOR c/w FOLD-DOWN GRILL. & Assembly. Installation Instructions

PRE-ENGINEERED HORSE STALL SYSTEMS SDFD SLIDING DOOR c/w FOLD-DOWN GRILL. & Assembly. Installation Instructions PRE-ENGINEERED HORSE STALL SYSTEMS 4800 SDFD SLIDING DOOR c/w FOLD-DOWN GRILL & Assembly Installation Instructions 4800 SDFD Sliding Door c/w Fold-Down Grill Components - 1 3 /4" x 2" x 88" channels (2)

More information

Product Information. Long-stroke gripper PEH

Product Information. Long-stroke gripper PEH Product Informaton PEH PEH Flexble. Hgh Performance Densty. Bus capable. PEH long-stroke grpper Servo-electrc 2-fnger parallel grpper wth long jaw stroke for large parts and dverse parts spectrum Feld

More information

Specifications for Construction and Installation of Traffic Signs. Pennington County Highway Department

Specifications for Construction and Installation of Traffic Signs. Pennington County Highway Department Specificatins fr Cnstructin and nstallatin f Traffic Signs Penningtn Cunty Highway Department -, 2' - L - ~ NOT LESS THAN 7' (8' FOR STREET NAMES) 12' TO 16' - NOT LESS THAN 5' (7' FOR STREET NAMES) NOTE,

More information

MODULAR BUMPER INSTALLATION MANUAL

MODULAR BUMPER INSTALLATION MANUAL MODULAR BUMPER INSTALLATION MANUAL Parts List* 1 Center section 1 Side extension, passenger / right 1 Side extension, driver / left 1 Side cap, passenger / right 1 Side cap, driver / left 1 Brush guard,

More information

AMPINNERGY* Modular Wiring System 25 JUL 11 Rev G

AMPINNERGY* Modular Wiring System 25 JUL 11 Rev G Applcaton Specfcaton 114-6039 AMPINNERGY* Modular Wrng System 25 JUL 11 Rev G All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and nches]. Unless otherwse

More information

hydrosphere SERIES Semi-Inground Pool by Doughboy Semi-Inground Pool by Doughboy

hydrosphere SERIES Semi-Inground Pool by Doughboy Semi-Inground Pool by Doughboy hydrosphere SERIES Semi-Inground Pool by Doughboy Semi-Inground Pool by Doughboy 1 Installing the Optional Top Rail: Regardless if using the standard top rail or the deck mount top rail, the top rail will

More information

SERVICE MANUAL

SERVICE MANUAL SERVCE MANUAL SEWNG MACHNE MODELS 11602090 12714090 TABLE OF CONTENTS. LOCATE AND DENTFY THE PARTS... 2. WND THE BOBBN... 3. PREPARE YOUR TOP THREAD..., STTCH SELECTOR/STTCH LENGTH CONTROLS... 4- & 4-2

More information

Linear Pro Kit 27. features and benefits: dimensions: additional information:

Linear Pro Kit 27. features and benefits: dimensions: additional information: Linear Pro Kit 27 LN-K-3P-27 Linear Pro Kits provide a modern, slick and stylish appearance. The extrusion based exhibits feature a Velcro-applied fabric center graphic, UV printed or frosted plex headers

More information

ADD ADD 0.5.5" TO HEIGHT ADD 0.5 TO HEIGHT ADD 1 TO HEIGHT ADD 1 ADD 4' MODEL " (43) " (43) 1.82" (46.10) 1.82" (46.10) 1.82" (46.

ADD ADD 0.5.5 TO HEIGHT ADD 0.5 TO HEIGHT ADD 1 TO HEIGHT ADD 1 ADD 4' MODEL  (43)  (43) 1.82 (46.10) 1.82 (46.10) 1.82 (46. SlimLine Luminaire LED Product Features - Sheet metal body with end knock-outs and side knock-outs - For seamless LED lamps available in Flat Clear, Flat Frosted, Round Frosted - Dimming (LUTRON A SERES)

More information

ESS Awning / Casement / Fixed Lite 52

ESS Awning / Casement / Fixed Lite 52 05-01 83963/S8100PP SCREW SQ 8G X 1.0 PAN PP SS #2 (FRAME) 85990 /S8150PP SCREW SQ 8G X 1.5 PAN PP SS #2 (SASH) 83765 SCREW SQ 8G X 0.75 PAN SD SS #2 (SECURITY SCREEN TO FRAME) 86876 SCREW SQ M4 X 0.55

More information

..., E. Channel I,slands Boulevard Retail Center

..., E. Channel I,slands Boulevard Retail Center /""2'l41)channel slands Retal Center "---rag; 0 f3. Master Sgn program PZ 03-500-32 PC RE50 #2004-50 (Aprl 192006). GENERAL MASTER SGN PROGRAM... E. Channel slands Boulevard Retal Center l. The purpose

More information

INSTALLATION MANUAL FRONT. See pages 2 and 3 of this manual for configuration options. Level of Difficulty. Product Photo (center section only)

INSTALLATION MANUAL FRONT. See pages 2 and 3 of this manual for configuration options. Level of Difficulty. Product Photo (center section only) INSTALLATION MANUAL FRONT Level of Difficulty Moderate Product Photo (center section only) All hardware listed below will be provided with the bumpers center section. Additional hardware will be supplied

More information

626 - Mazda MX-6 - Mazda

626 - Mazda MX-6 - Mazda Factory Radio Other Documents Available For This Vehicle: No additional documents available at this time Adobe Acrobat Reader Printing Tips: 1) Select FLE then PRNT and select your printer. 2) n the print

More information

EASY-IN POOL STEP SYSTEM NE132

EASY-IN POOL STEP SYSTEM NE132 EASY-IN POOL STEP SYSTEM NE132 This instruction manual features multiple guides for the step unit components. 7939 EASY POOL STEP (NE113) FOR USE WITH: EASY-IN POOL STEP (NE126) 6492 PARTS & HARDWARE FOR

More information

STRATO-THERM* Terminal and Splice Hand Crimping Tools and 59461

STRATO-THERM* Terminal and Splice Hand Crimping Tools and 59461 STRATO-THERM* Termnal and Splce Hand Crmpng Tools 59294 and 59461 Instructon Sheet 408-1259 17 AUG 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered

More information

Parking barrier Parc 200 / Parc 200 speed

Parking barrier Parc 200 / Parc 200 speed GB Operatng nstructons Last updated: 01.2014 Parkng barrer Parc 200 / Parc 200 speed 1. Meanng of symbols 2. Table of contents Advce Cauton! Danger of personal njury! The followng safety advce must be

More information

MICROWAVEHOODCOMBINATION INSTALLATIONINSTRUCTIONS

MICROWAVEHOODCOMBINATION INSTALLATIONINSTRUCTIONS MCROWVEHOODCOMNTON NSTLLTONNSTRUCTONS Ths product s sutable for use above electrc or gas cookng products up to and ncludng 36" (91.4 cm) wde. See "nstallaton Requrements" secton for further notes. These

More information