FERROUS AND NON-FERROUS MATERIAL
|
|
- Angel Jefferson
- 5 years ago
- Views:
Transcription
1 Aluminum Cutting Small Material Large Material Brush Deburring Compound Angles In and Outside Deburring
2 FERROUS AND NON-FERROUS MATERIAL MADE IN GERMANY H350 & H450 For production cutting of mild steel and stainless steel tubes, pipes, sections, and profiles Durable wormwheel drive for full-time production H450 (cuts up to 6.3 tube) Motor 3-phase 220 V, 440 V, or 575 V 2 speed motor Saw blade speeds 27/54 rpm or 54/108 rpm H350 max size saw blade: HSS 350mm (14 ) H450 max size saw blade: HSS 450mm (18 ) H450 Vise opens 200 mm (7.9 ) with the jaw plates removed Miter-cuts up to 45 to both sides Positive locking pin at Double-Grip quick-action manual vise on H350 version A *pictured to right Dual air vise on the Version B models *Version B pictured (Dual Air Vises) Trigger switch standard on all machines H450 comes with 2 heavy-duty quick-action vises Cutting H350 (14 HSS Saw Blade) H450 (18 HSS Saw Blade) Range mm mm - 4.3" 160mm - 6.3" 135mm mm mm mm mm mm - 4.1" 95mm - 3.7" 140mm mm x70mm - 6" x 3 110x70mm- 4 x 3 200x80mm x x90mm x 3.5
3 Hand-operated High Quality Cold Saw Heavy duty wormwheel drive with hardened and ground wormshaft and special bronze wormwheel, completely free from clearance, running in an oil bath. Oversized main spindle for full-time operation, axial adjustable. Saw blade speeds: 60 Cycle = 27/54 RPM or 54/108RPM. Safety Guard System The two-piece hinged safety guard made of cast aluminum cares for best operator's safety. In rest position, it covers the saw blade completely and remains close to the cutting area when swiveling the saw head. It is a quick lift-up without tools for easy saw blade replacement. Saw Head Pivot System Rigid, double yoke pivot with hardened and ground shaft, adjustable on both sides. Mitering Saw Head Head easily miters within 45 to any position, with positive locking at Mitering table is clamped from top. Workpiece remains stationary while head rotates. Clamping System H350 standard double-grip quick-action vise and H450 standard with two quick-action vises, each movable and with exchangeable vise jaw plate. Air operated automatic vise system on version B models, with pilot valve behind the saw head for immediate clamping when the saw head is lifted from rest position, and with air filter-regulator-lubricator. Operating pressure: 6 bar (90 PSI). Separate air regulator for each vise cylinder. Water Coolant System Coolant tank 40 Liters (10 Gal.); separate, removable chip container; powerful diaphragm pump driven by eccentric bearing in the saw head; coolant supply to both sides of the saw blade. Electric Equipment 3-phase 2-speed motor, 1.7/3.0 KW (2.2/4.0 HP) 60 C. Main switch with thermal overload protection. Sawblades H.S.S. H450: 450x(3.0 or 3.5)x40 mm (18") for mild steel and non-ferrous metals. 400x(3.0 or 3.5)x40 mm (16") for stainless steel at slow speed. 350x(2.5 or 3.0)x40 mm (14") for steel solid material. Drive holes: 2 off 12 mm dia. on cycle 64 mm dia. Not recommendable for segmental blades. They overstress the machine. H350: 350x(2.5 or 3.0)x40 mm (14 ) Standard Equipment 1 set of operating tools, 1 instruction booklet with parts list. Extra Equipment Length stop 1 meter (40") ungraduated, digital length stops of various lengths, top clamp manual or air operated, air vise system, down-feed restriction cylinder, semi-automatic version, saw blades, coolant fluid, roller carriers, v-jaws (thin wall tubing and bundle cutting). Dimensions and Weights H450 Machine unpacked: MANUAL LARGE CUTTING CAPACITY 720 x 1000 x 1800 mm, 350 kg 37 x 40 x 71, 772 lbs *Version A pictured (Double Grip Quick Action Manual Vise
4 FERROUS AND NON-FERROUS MATERIAL H350H & H450H MADE IN GERMANY Automatic down feed and automatic clamping For production cutting of mild and stainless steel tubes, pipes, sections, and profiles HABERLE H450H (cuts up to 6.3 tube) Durable wormwheel drive for full-time production Motor 3-phase 220V, 440V or 575V Saw blade speeds 27/54 RPM or 54/108 RPM HSS Saw blades up to 350 x 40 mm (14 ) for H350H HSS Saw blades up to 450 x 40 mm (18 ) for H450H Vise opens 185 mm (7.3 ) H350H and 200 mm (7.9 ) H450H Miter-cuts up to 45 to both sides Pusher system available to convert machine to fully automatic *Optional adjustable V-Jaws available for thin wall tubing & bundle cutting Cutting H350H (14 HSS Saw Blade) H450H (18 HSS Saw Blade) Range mm mm - 4.3" 160mm - 6.3" 135mm mm mm mm mm mm - 4.1" 95mm - 3.7" 140mm mm x70mm - 6" x 3 110x70mm- 4 x 3 200x80mm x x90mm x3.5
5 SEMI-AUTOMATIC LARGE CAPACITY SAFETY GUARD 2-piece cast aluminum guard system for best operator's safety. The link operated forward section provides for maximum operator's safety and allows easy and quick saw blade replacement. DRIVE GEARS Extremely robust wormwheel drive with hardened and ground wormshaft, special bronze wormwheel and a saw blade drive shaft of Ø 70 mm, running in an oil bath, for 3-shifts operation, free of maintenance. Elastic coupling between motor and drive gears. AUTOMATIC DOWN-FEED SYSTEM Quick motion from rest position to the adjustable material level and infinitely adjustable power down-feed motion, with adjustable return point and quick return motion into the upper rest position. This allows the feeding of the material over the vise into the cutting area, but requires two-hands safety start system. PIVOT SHAFT Double yoke pivot system with hardened and ground shaft, adjustable on both sides. Little vibration due to the low pivot level. MACHINE TABLE Large table allows individual positioning for the two vise units. Mitering table allows for horizontal mitering of the saw head within 45 to both sides. Movable rear jaws allow a small cutting slot for easy and accurate straight and mitering cuts through thin-walled material. A length stop can be installed at both sides of the back fences using the adapter hole. SAW BLADES HSS (High Speed Steel) H350H and H450H: 350 x (2.5 or 3) x 40 mm, 315 x 2.5 x 40 mm H450H only: 450 x (3 or 3.5) x 40 mm, 400 x (3 or 3.5) x 40 mm 3-PHASE MOTOR Slow speed USA: 60 Hz: 850/1700 RPM, 1.3/2.4 kw Standard speed USA: 60 Hz: 1700/3400 RPM, 2.1/2.6 kw SAW BLADE SPEEDS Slow speed motor: 27/54 RPM for stainless and mild steel Standard speed motor: 54/108 RPM for mild steel and nonferrous metals SAWBLADE LUBRICATION SYSTEMS Water coolant system with diaphragm pump, stop cock and large containers for coolant fluid and swarf chips. Plus an additional low-consumption oil spray mist system with precision dispenser from UNIST Inc. (recommended for cutting thinner tubes, sections and rectangular profiles). AIR VISE Strong double-grip air vise with adjustable guide rails and adjustable arm bracket to hold the cut-off piece, for burr-free finished cuts. Replaceable vise jaws allow the installation of profiled jaws for special applications. CONTROL SYSTEMS For a minimum of maintenance and service, the electric system is held at the necessary minimum, including main switch, overload switches and 24 Volt circuit to watch the air control system. The automatic cycle of clamping and down-feed is completely air controlled, including the Emergency Stop button which locks the vise cylinder in any emergency situation, and with selective switch for permanent or stop & go motor drive. A control desk incorporates the manual actuators (Start / Stop / Emergency Stop), a cycle counter and an air coupling to install the air hose of the vise cylinder. Operating pressure for the air supply: 6 bar. DIMENSIONS AND WEIGHTS H350H: 360kg (793 lbs) 920x700x1960mm (36 x28 x77 ) H450H: 450kg (992 lbs) 1250x700x2050mm (49 x28 x81 ) STANDARD EQUIPMENT Maintenance tools, operating wrenches. English manual with parts list. OPTIONAL EQUIPMENT Saw blade, length stop, top clamp, roller tables, profiled jaws, v-jaws, lubrication fluids, pusher system (makes it fully automatic), double-grip air vise.
6 FERROUS AND NON-FERROUS MATERIAL H90 MADE IN GERMANY 350 mm (14 ) sawblade 180 mm (7 ) jaw opening Two-ways mitering for compound angle cuts Head tilts 0 - for notching cuts Vise placed for slitting cuts Compound angle cuts Notching Acute angles Slitting of tube, sections or channels of steel, stainless steel and nonferrous metals. Useful in vehicle construction, steel shaping and glass construction (diagonal compound cut)
7 COMPOUND ANGLES 2-PIECE SAFETY GUARD made of aluminum covers the whole sawblade in the rest position. Multiple latch linkage with quick release knob for easy and fast sawblade replacement without removing the guards. PRECISION WORMWHEEL DRIVE with hardened and ground wormshaft, special bronze worm wheel and a main spindle of 70 mm (2.7") dia. running in oil. Elastic coupling between motor and gears. TILTING SAW HEAD allows vertical mitering 0º- 90º to the right side. The vise in place, it allows compound angles with tilted head 0º- 45º and mitered vise 0º- 60º according to the 1º graduations. Quick adjustment by clamp levers without tools. Safe handling of the rigid moving head. Large tilting block for exact angle cuts. Double yoke pivot, adjustable. MITERING & MOVING VISE allows horizontal angle cuts 0º- 60º. Positive lock by spring-loaded pin in straight and 45º position. To meet the total cutting range of the sawblade, the mitering vise can be moved backwards. For notching and slitting cuts, the vise can be removed and placed to the left side. NOTCHING CUTS WITH TILTED HEAD: The vise placed to the left side, the saw head can be tilted vertical up to 90º for notching cuts into channels and T-size profiles. The spring-loaded saw head movement enables exact cuts. SLITTING CUTS IN DOOR FRAMES: Placing the vise to the left side, allows for parallel slits due to the positive 90º locking. All adjustments are done by clamp levers without tools. MATERIAL SUPPORT BLOCK on the left side of the table, supports the cut-off piece for safe straight and miter cuts. The block can be moved when the tilted head makes it necessary and removed to replace the vise to the left side. SPECIAL APPLICATIONS: Total altitude between table and sawblade is 210 mm (8.3") and allows various clamping devices for many purposes that is usually done on a milling machine (like slitting of bolts, etc.). FREE ADJUSTABLE TURN TABLE allows for material to be always fed in the same direction. After mitering adjustment, turn the whole machine into position. SAWBLADE SIZE HSS 350x40 mm (14"); 315x40 mm (12.5"); 300x40 mm (12"). Two drive holes 11 mm on circle 64 mm dia. Use the right rake angle: 16º-18º for steel and stainless steel, 22º-25º for soft aluminum alloys. Segmental blades are not recommended. They can overstress the machine. SAWBLADE SPEED AND MOTOR POWER 60 Hz: 27/54 RPM, 1.2/2.4 kw (1.7/3.3 HP) 60 Hz: 54/108 RPM, 2.2/2.7 kw (3.0/3.6 HP) WATER COOLANT SYSTEM consist of a large coolant tank and chip container in the base. Reliable diaphragm coolant pump for water emulsions. Optional: Low-consumption cutting oil lubricating system or air operated oil spray system available. ELECTRICAL EQUIPMENT 3-phase motor (220V, 460V, or 575V) with speed selective switch. Main switch with motor protection. H90 VERSION B: AIR OPERATED VISE SYSTEM with vise cylinder 160 mm (6.3") dia., automatic stroke 8 mm (0.3"), air pilot valve, front regulator and filter-lubricator. Clamping is actuated when the saw head is moved from rest position by operating handle. Necessary air supply: 6 bar (90 PSI). DIMENSIONS AND WEIGHT (W x L x H) 700 mm x1200 mm x 1900 mm (28" x 47 x 75 ), approx. 320 kg (705 lbs) Packed size: 800 mm x 1200 mm x 1700 mm (31" x 47" x 67"). STANDARD EQUIPMENT Grease gun, wrenches, operating manual, quick-action mechanical vise (version A), coolant system, 24 Volt stop & go switch. OPTIONAL EQUIPMENT Air vise system on version B, length stop, oil lubricant systems, sawblade, coolant fluid. CUTTING RANGE Round tube O.D. 115 mm - 4.5" 110 mm - 4.3" 100 mm - 3.9" Square tube 105 mm - 4.1" 100 mm - 3.9" 95 mm - 3.7" Flat profile 180x70 mm - 7.1"x x70 mm - 6.3"x x70 mm - 4.7"x2.8 Channel, girder 150x80 mm - 6"x x80 mm - 5.5"x x65 mm - 4"x2.6 Solid mild steel 60 mm - 2.5" with sawblade 300 mm, coarse toothing cut Solid Stainless Steel 50 mm - 2" with sawblade 300 mm, coarse toothing cut
8 BRUSH DEBURRING Description of the machine: The rotary deburring machine deburrs cuttings frontally on tubes, sections and solid bars in a stretched as well as in a curved shape. A simultaneous internal and external deburring takes place with hollow sections. The required rotation of the high performance round brush is performed by the machine. The deburring result is reached via 2 rotations of the brush: - The brush itself is driven via the brush receptacle. - The whole brush receptacle, with rotating brush, rotates around its own axis. The first movement provides for the impingement of the wire tips to the workpiece. As a result, the simultaneous internal and external deburring is achieved. By the second rotation, the turning of the workpiece is eliminated. It ensures that the workpiece is deburred all around. The machine consists of: - 1 sturdy housing engineering standard execution - 1 rotation deburring module
9 Required: either and/or RSA TURNAMAT - 1 front plate with changeable insert from plastic - 1 front plate with adjustable central prismatic guiding Working Sequence: The operator passes the workpiece with light contact pressure to the brush, without turning the workpiece. In one operation all the contours of the workpiece are deburred internally and externally at the same time. Tool data: External diameter of the deburring brush: 250 mm (10 ) Working width of the deburring brush: mm (1-4 ) Delivery extent: Machine installed ready for electrical installation, either with a front plate with adjustable central prismatic guiding (shown below) and/or with a front plate with changeable insert from plastic, 1 deburring brush included. The machine / installation is designed for the use in an explosionproofed area. The deburring principle, easy and efficient Technical Data Material: steel, stainless steel and non-ferrous metals Motor Speed 2 speed 1500 / 3000 rpm min. Workpiece diameter 10 mm ( 0.4 ) max. Workpiece diameter 120 mm ( 4.7 ) Drive power 3,7 / 4,4, pole changeable kw Voltage 3~460V or 220V (extra), 60Hz Width approx. 700 mm ( 2-4 ) Height approx mm ( 4-7 ) Depth approx. 930 mm ( 3-1 ) Weight approx. 580 kg ( 1,279 lbs ) Due to the double brush rotation it is not necessary to turn the workpieces during the deburring process 1st rotational direction (light arrow): high-speed deburring rotation 2nd rotational direction (dark arrow): low-speed service rotation The driving unit of the brush rotates All edges are reached without turning the workpiece Sound level Can be higher than 85 db(a) Quick in and outside deburring of material
10 DEBURRING MACHINES AND KOPAL TOOLING Haberle HR Deburring Series (Kopal tooling sold separate) Spindles USE HR301 1 when only one Kopal tool is needed HR302 2 used for multiple Kopal sizes or 1 interior and 1 exterior Kopal tool. HR304 4 used for a variety of Kopal tooling sizes Tube Size Per Tool Centre Angle: Centre Angle: 60 Shaft ERNAL CM1 ERNAL CM1 ERNAL CM2 ERNAL CM2 ERNAL CM2 ERNAL CM2 ERNAL CM2 ERNAL CM2 ERNAL CM2 ERNAL CM3 ERNAL CM3 ERNAL CM3 ERNAL CM3 MADE IN FRANCE Since 1951 Chamfering and Deburring Tools
11 ALUMINUM CUTTING AL380/A & AL380/B Manual Saws MADE IN GERMANY Cuts aluminum alloys and plastics Carbide tipped 15 Saw Blade (380mm) Saw blade speed is 3000 rpm *AL380/A Manual Saw With Dual Mechanical Clamp Vises Miters 45 both sides Spring loaded bolt for 0 and 45 Mechanical oil pump built in saw head - AL380/A 2 Mechanical push and clamp vises - AL380/A 2 Air vises and Unist Oil System - AL380/B 1 speed 3-phase motor 220V, 460V, & 575V AL380H Semi-Automatic With Dual Air Vises AL380H - Semi-Automatic Saw Powered Saw head with quick forward motion Adjustable power stroke and quick return 2 hand safety start and emergency stop Pneumatic control system with 2 air vises Unist oil lube system with nozzle built into the saw guard Chip chute channel with 4 exhaust connection Haberle Aluminum Cutting Series: AL380 & AL380H Cutting Range 45 Round tube Solid round 3 3 Square tube Rectangular tube 7 x x 3.5
12 Haberle S225 Haberle H250 Haberle H x x x x x 2.5 Carbide Saw Blades In Stock Size mm Thickness mm Bore mm Teeth Size mm HSS Saw Blades In Stock Thickness mm 350 x 3.5 x HSS (High Speed Steel) High Quality Saw Blades 225 x 2.0 x x 3.5 x Services: Sharpen, Re-tooth, & Grind and Re-Tooth for 250 x 2.0 x 40 HSS Saw Blades with bore sizes 32, 38, 40, 50mm 350 x 3.5 x 40 *112 SHARPEN RE-TOOTH GRIND & 300 x 2.5 x 38 RE-TOOTH 380 x 3.5 x 40 * x 2.5 or 3.0 x x 3.5 x x 2.5 or 3.0 x x 4.0 x Tooth HSS Saw Blade to The Proper Geometry - Steel, 350 x 2.5 or 3.0 x x 4.0 x Stainless Steel, Aluminum, Copper, or Lead 350 x 2.5 or 3.0 x 40 Carbide Tip Saw Blades ( for AL380 or similar machines) 350 x 3.0 x 50 Any size, thickness, bore, and number of teeth for a Carbide Tip Saw Blade can be ordered ½ New Saw Blades And Sharpening Service Quick Service - In house HSS Sharpening CNC Sharpening Machine *Carbide Tip Silencer Saw Blade Carbide Tip Sharpening and Re-Tipping Available Call for recommendation on the number of teeth for the material 400 x 3.0 or 3.5 x 40 being cut. Send sharpening to address below with note stating x 3.0 or 3.5 x 40 Company, contact, and phone number. Bore mm We can order any size needed KEN BERGMAN AND ASSOCIATES, LLC (KBA Saw) LOREL AVE OAK LAWN, IL USA or Warehouse located in BRIDGEVIEW, ILLINOIS web: sales@haberleusa.com
CSNC CARBIDE CIRCULAR SERIES
CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT
More informationP225 STANDARD FEATURES OPTIONAL FEATURES
CIRCULAR COLD SAWS P225 Manually operated Robust sawing head miters 45 left Bench top model no base Single blade speed of 1 HP Manual vise Material work stop rod for multiple cuts of the same length Flood
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationSAWING CATALOG. GRAINGER.COM/CHOICE l Grainger
SAWING CATALOG GRAINGER.COM/CHOICE l 1.800.Grainger BENCH MITER BAND SAW A bench top band saw comes with large cutting capacities. Easy to move and position where needed this lightweight bench unit is
More informationcold saws manual circular cold saws Cut 250 Super Cut 315CE Super Cut 315CE1PH Super Technics 350CE semi-automatic and automatic circular cold saws
cold saws manual circular cold saws Cut 250 Super Cut 315CE Super Cut 315CE1PH Super Technics 350CE semi-automatic and automatic circular cold saws Technics 350SA Technics 350A Euromatic 370S Euromatic
More informationHEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with
More informationALFRA PRESS. Made in Germany by ALFRA
52 ALFRA PRESS Made in Germany by ALFRA 53 ALFRA PRESS Overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 56 Page 58 Control cabinet housing, control cabinet doors, mounting plates Control cabinet housing,
More informationThis just may be the Rotary Transfer machine you ve been waiting for.
This just may be the Rotary Transfer machine you ve been waiting for. A Machine Like No Other T he new Eclipse 12-100 is a ground-up redesign of the famous Hydromat concept with all new components. It
More informationPilous ARG 220 DESCRIPTION
OFFER LIST Pilous Železná 9, 619 00 Brno, Czech Republic Tel.: +420 543 25 20 10 e-mail: metal@pilous.cz, www.pilous.cz ARG 220 2600 X 27 X 0,9 90 +45 +60 220 170 105 220 160 75 270 x 150 175 x 80 105
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationCircular Cold Saws and Systems for every application. Competence in Circular Cold Sawing Technology
Circular Cold Saws and Systems for every application Competence in Circular Cold Sawing Technology 2 VMS-Range Vertical Circular Cold Saws Manual, semi-automatic and automatic machines Robust and durable.
More informationTSM 355 MKS 355 CS 225 CS 250 eco CS 250 CS 315 L CS 350 L CS 275 H CS 315 H CS 350 SA EBS 85 B EBS 100 B
O.R.P.I., S.L. C/ Juan de la Cierva, 23 50014 Zaragoza Tel: 976 471 440 www.orpi-sl.com orpi@orpi-sl.com TSM 355 MKS 355 CS 225 CS 250 eco CS 250 CS 315 L CS 350 L CS 275 H CS 315 H CS 350 SA EBS 85 B
More informationWhen semi-automatic brings full satisfaction.
Powerful solutions passionate people When semi-automatic brings full satisfaction. SKL 450 E SEMi-automatic mitre circular saw > MADE IN GERMANY SKL 450 E semi automatic MITRE CIRCULAR SAW ADVANTAGES AT
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationSeries 8 Mark II. Universal Vertical Band Saw
Series 8 Mark II Universal Vertical Band Saw Capacity 18 x 22 Marvel Series 8 Mark II Universal Tilt-Frame Vertical Band Saw The Marvel Series 8 Mark II has a capacity of 18 x 22 (18 diameter round) with
More informationMC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding
MC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding Ex GST Inc GST $5,590.00 $5,290.00 $6,149.00 $5,819.00 Special
More informationSPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
More informationTRAV-L-CUTTER Pipe Cutter
TRAV-L-CUTTER Pipe Cutter Horizontal and vertical c utting Fast and accurate cutting and beveling Add mounting chain sections to fit larger diameters COLD CUTTING, COMPACT DESIGN, EASY SET-UP The Wachs
More informationALFRA. Deburring Technology. Bevel Milling and Deburring Devices for the universal use B/79
ALFRA B Deburring Technology Bevel Milling and Deburring Devices for the universal use B/79 ALFRA Bevel Milling and Deburring Devices Overview Made in Germany by ALFRA Page B/84 Page B/86 Type KFV KFH
More informationHOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationPrecision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
More informationDRILLING CATALOG. GRAINGER.COM/CHOICE l Grainger
DRILLING CATALOG GRAINGER.COM/CHOICE l 1.800.Grainger DRILL PRESSES BENCH fact sheet 8" BENCH DRILL PRESS Dayton's light duty drilling machine combines performance and economy into one. It s an ideal choice
More informationARG 330 plus H.F. OFFER SHEET. Pilous. Železná 9, Brno, Czech Republic Tel.:
OFFER SHEET Pilous ARG 330 plus H.F. Železná 9, 619 00 Brno, Czech Republic Tel.: +420 543 25 20 10 e-mail: metal@pilous.cz, www.pilous.cz A completely new, revolutionary concept of the band saw arm casting
More informationHM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical
HM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical Ex GST Inc GST (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System $7,250.00 ORDER
More informationCOLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
More informationInstruction Manual X97
Index Page Technical data... 2 Dimensions... 3 General description... 4 Selection of cutter... 5 Instruction for grinding... 5 Dimensions of bevel... 7 Bevelling angle... 8 Adjustment: Straight edge (Land)...
More informationHM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018
More informationChapter 24 Machining Processes Used to Produce Various Shapes.
Chapter 24 Machining Processes Used to Produce Various Shapes. 24.1 Introduction In addition to parts with various external or internal round profiles, machining operations can produce many other parts
More informationAL Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand
AL-336 - Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: MODEL: L682 AL-336 Swing Over Bed (mm): 300 Distance Between Centres (mm): 900 Spindle
More informationReed pipe tools and vises
Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such
More informationARG 520 DC CF-NC Automat
OFFER LIST Pilous Železná 9, 619 00 Brno, Czech Republic Tel.: +420 543 25 20 10 e-mail: metal@pilous.cz, www.pilous.cz ARG 520 DC CF-NC Automat 5770 x 41 x 1,3 kw 90 520 500 700 x 480 Main motor 400 V,
More informationProduct Brochure For L682D. Description. Features. Auckland: (09)
AL-336D DELUXE - Centre Lathe 300 x 900mm Turning Capacity Includes Digital Readout, Quick Change Toolpost, Leadscrew Covers, Foot Brake & Cabinet Stand Ex GST Inc GST $5,200.00 $5,980.00 ORDER CODE: MODEL:
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationHigh Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
More informationTU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head
TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head Package Deal Ex GST Inc GST $3,850.00 $4,235.00 Package Contents - SAVE $209.00 (Inc) 1 x L691
More informationKKS Circular Sawing Machines
If Steel is Your Deal! KKS Circular Sawing www.kaltenbach.com 1 The complete KALTENBACH program for metal processing 2 www.kaltenbach.com 3 The Economical One Applications: locksmith s shop, metal construction,
More informationSpecial Offers. December New! Sharpening machine for domestic knives and scissors.
December 2011 Special Offers! Sharpening machine for domestic knives and scissors. MVM Srl 42015 Correggio (RE) ITALY- Via del Progresso, 14 Tel. (+ 39) 0522 632266 - Fax (+ 39) 0522 642011 Email: mvmsrl@mvmsrl.it
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationTU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head
TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head Package Deal Ex GST Inc GST $3,980.00 $4,577.00 Package Contents - SAVE $402.50 (Inc) 1 x L691
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationPortable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel PORTABLE HACKSAWS Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable
More informationChapter 25. Other Machining Processes. Materials Processing. MET Manufacturing Processes. Shaping Planing Broaching Sawing Filing
MET 33800 Manufacturing Processes Chapter 25 Other Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Other Machining Processes Shaping
More informationSTARTING SERIAL NUMBER PARTS LIST FOR. Wellsaw MODEL 600 METAL CUTTING BAND SAW
STARTING SERIAL NUMBER 11075 PARTS LIST FOR Wellsaw MODEL 600 METAL CUTTING BAND SAW Wellsaw 2829 N. Burdick, Kalamazoo, MI 49004 Phone: 269-345-1132 Fax: 269-345-0095 Rev 171005 INSTALLATION, OPERATION
More informationAL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity
AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity Ex GST Inc GST $3,200.00 $3,680.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm):
More informationHorizontal and Vertical. Metal Cutting Band Saw MODEL: BS-115
Horizontal and Vertical Metal Cutting Band Saw MODEL: BS-5 SAFETY. Know your band saw. Read the operator s Manual carefully. Learn the operations, applications and limitation.. Use recommended accessories.
More informationPortable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable cutting of
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationTechnology with Time...
PLC Controlled Bandsaw Machine with LMG-LX Rails & Bearings Fully Automatic PLC Controlled Horizontal Double Column LMGA Type Bandsaw Machine.? Steel Center.? General Workshop.? Tool Room.? Forging Industries.?
More informationNAMEPLATE. For over a 105 years, Clausing has been a leader in the Metalworking industry with rugged dependable Machine Tools.
NAMEPLATE PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 NAMEPLATE For over a 105 years, Clausing has been a leader in the Metalworking industry with rugged dependable Machine Tools. Today, Clausing
More informationHigh Precision Diaphragm Chucks
Precision Workholding Technology High Precision Diaphragm Chucks Unique Diaphragm Chuck Design MicroCentric Improving the quality and efficiency of secondary machining operations.... through high workpiece
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationROOP LAL Unit-6 Lathe (Turning) Mechanical Engineering Department
Notes: Lathe (Turning) Basic Mechanical Engineering (Part B) 1 Introduction: In previous Lecture 2, we have seen that with the help of forging and casting processes, we can manufacture machine parts of
More informationMetals can be bought from suppliers in standardized forms and sizes, such as round,
1.4 METAL CUTTING BAND SAWS: Metals can be bought from suppliers in standardized forms and sizes, such as round, rectangular or square bar stock or in the form of large sheets (plates). Bar stock normally
More informationFLUSH-MOUNTED CIRCULAR SAWS
NO TEARS NO EFFORT. The basic principle is pulling instead of pushing. Those who have had to cut long, unhandy or particularly hard workpieces, know that pulling is easier and cleaner than pushing. Considerably
More informationPrecision Grinding and Control Vise. Vises PSS. Tools and Accessories. For more Information current prices, please
PSK 50 shown incl. pull-down feature Vises Precision Grinding and Control Vise high precision, robust structure, hardened and ground v-grooves, high holding capacity can be used on 4 different sides face
More informationMotor Power (kw / hp): Voltage / Amperage (V / amp): Shipping Dimensions (L x W x H) (cm): Nett Weight (kg): Features
AL-356V - Centre Lathe 356 x 1000mm Turning Capacity - 51mm Spindle Bore Includes Digital Readout, Quick Change Toolpost & Electronic Variable Speed With Digital Readout Ex GST Inc GST $7,150.00 $7,865.00
More informationHigh Performance Heavy Duty Lathe
High Performance Heavy Duty Lathe TC-46M series is the most powerful and rigid CNC lathe in its class. Designed with the latest technology and excellent equipment for highest material removal rate and
More informationVERTICAL BANDSAWS. A Line of Quality Constructed, Heavy-duty Tilt Frame Miter Saw and Vertical Bandsaws 20 to 40 Throat
VERTICAL BANDSAWS PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 VERTICAL BANDSAWS A Line of Quality Constructed, Heavy-duty Tilt Frame Miter Saw and Vertical Bandsaws 20 to 40 Throat TILT FRAME
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More information23 WOODWORKING EQUIPMENT
23 WOODWORKING EQUIPMENT Chisel Mortiser Chisel mortiser... 1199 Cutting Machine Heavy duty band saw... 1197 Scroll saw... 1197 Dust Collector Dust collector... 1201 Overarm Router Overarm router... 1202
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationS80 SERIES CNC SURFACING MACHINES
S80 SERIES CNC SURFACING MACHINES Machining Equipment Created for Performance Racing & Engine Remanufacturing. So Advanced, It s Simple. S80 SERIES SURFACING MACHINES The S80 series surfacers are the most
More informationFICHE TECHNIQUE. 275 C - ZA du Jasmin SAINT GENIX SUR GUIERS - Tel: +33 (0)
2880 x 27 x 0,9 Universal robust band saw is appraised for general use in continuous uninterrupted production plants and in work-shops (work on locks, maintenance) as well. Industrial band 27 x 0.9 mm
More informationMulti-axis milling/turning system IMTA 320 T2 320 T3. Interaction Milling Turning Application
Multi-axis milling/turning system IMTA 320 T2 320 T3 Interaction Milling Turning Application T e c h n i c a l D a t a s h e e t The consistent 75 step bed design allows the near rectangular arrangement
More informationCarbide Circular Sawing Systems. P-70B Min. 5/8 Max Capacity P-100B Min. 3/4 Max. 4 Capacity P-150B Min. 2-3/4 Max.
Carbide Circular Sawing Systems P-70B Min. 5/8 Max. 2.75 Capacity P-100B Min. 3/4 Max. 4 Capacity P-150B Min. 2-3/4 Max. 6 Capacity Carbide Circular Saws Standard Features Include Servo Driven Automatic
More information$ incl. Ø 12 5/8 /84T HM saw blade and 4 ft 7 guiderail $ Filip De Vis Cell: Tel:
The first metal circular saw with 4 3/4 cutting depth (on guiderail) $ 999.00 incl. Ø 12 5/8 /84T HM saw blade and 4 ft 7 guiderail Ref. 608270USET $ 899.00 incl. Ø 12 5/8 /84T HM saw blade Ref. 608270US
More informationMachining Processes Used to Produce Various Shapes. Dr. Mohammad Abuhaiba
Machining Processes Used to Produce Various Shapes 1 Homework Assignment Due Wensday 28/4/2010 1. Show that the distance lc in slab milling is approximately equal to for situations where D>>d. (see Figure
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationTOOLS THAT MEASURE UP!
TOOLS THAT MEASURE UP! 0-6 Inch Outside Micrometer Set Graduation: 0.0001 Carbide tips Micrometers over 1 /25mm are supplied with a setting standard Supplied in fitted storage case 0-12 set shown Range
More informationCollet Closer & Tailstock Options
Collet Closer & Tailstock Options Fail-Safe Collet Closers Spring-close, air-to-open for fail-safe operation (85psi max) Part remains clamped even if loss of air should occur Non-adjustable grip force
More informationDIVIDING EQUIPMENT DIVIDING EQUIPMENT
64 DIVIDING EQUIPMENT 65 D-01 UNIVERSAL TILTING ROTARY TABLE Model: HUT-300 QUICK MANUAL INDEXING. Suitable for milling, boring, shaping, drilling, dividing, setting angles and for circular cutting. Tilting
More informationI 640 West. c Offi. pany Phone. c ~ g CHICAGO 6. Ill. M h:tjryant OMPOUND RING BAR SUPPORT. GilBERT C DEarbom ~.
ll / - M h:tjryant c Offi I 640 West g CHICAGO 6. Ill pany Phone. c ~ GilBERT C DEarbom 2-5566 ~. OMPOUND TIL~:~ BORING, ~~: F:o~~:YH~~~ DRILLING ':~~~N~:E~~7:NE RECTANGULAR TAB ~~~;:E~:~z:T~~L TABLEe
More informationsaw SP 13V Transportable mitre belt saw with high cutting precision, particularly low-noise and infinitely variable saw belt speed
METAL BAND SAWS SP 13V Transportable mitre belt saw with high cutting precision, particularly low-noise and infinitely variable saw belt speed Ball bearing mounted saw band guiding providing outstanding
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationDOOR AND WINDOW COPE & STICK SYSTEMS HIGH PERFORMANCE PRODUCTION
DOOR AND WINDOW COPE & STICK SYSTEMS HIGH PERFORMANCE PRODUCTION P99-1 R-10C SINGLE END COPING SYSTEM Designed for a dedicated and accurate coping center with single or multiple part capability. Operation
More informationOperating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040
Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com
More informationLecture 18. Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing
Lecture 18 Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing For production of: Flat surfaces Grooves Notches Performed on long (on average 10 m) workpieces Workpiece moves / Tool
More informationThat s E[M]CONOMY: Big Performance for small Parts. EMCO MAXXTURN 25. Universal turning center for the complete machining of small, precision parts
[ That s ] E[M]CONOMY: Big Performance for small Parts. EMCO MAXXTURN 25 Universal turning center for the complete machining of small, precision parts EMCO MAXXTURN 25 [Work area] - Spacious - Free chip
More informationPRECISION CUTTING MICRACUT 202
PRECISION CUTTING MICRACUT 202 MICRACUT 202 MICRACUT 202 precision cutters are used for precise and deformation-free cutting of Metals, Ceramics, Electronic Components, Crystals, Composites, Biomaterials,
More informationCross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
More informationSPECIFICATIONS MS-10-5 MS Cutting capacity (Rated 80,000 PSI Tensile) Cutting length 62 in "
MS-25-10 STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere in the stroke the ram returns to "up" position. Two
More informationOverview Grinding Applications
GRINDING 14E Overview Grinding Applications SRG Workpieces High precision grinding Steady Rests Grinding diameter Ø 20-85 mm Camshafts Crankshafts Shafts Chapter 1 Fine adjustment of the grinding center
More informationMS HYDRAULIC GUILLOTINE SHEAR
MS-25-10 HYDRAULIC GUILLOTE SHEAR MS-25-10 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere
More informationBY LACKMOND TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS
TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS BEAST 10" WET TILE SAW BLADE SIZE: MOTOR CAPACITY: RIP CUT CAPACITY: DIAGONAL CUT CAPACITY: DEPTH OF CUT AT 90 : DEPTH OF CUT AT 45 : BEVEL:
More informationNEW VALID VT-1000 VERTICAL LATHE
NEW VALID VT-1000 VERTICAL LATHE The Valid VT-1000 CNC Vertical Lathe is the result of several years of collaboration between Valid Machinery of the United States and Precursor Tech Co. LTD. of Taiwan.
More informationHM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand
HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand Ex GST Inc GST $4,350.00 $3,990.00 $4,785.00 $4,389.00 Special
More informationHM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size
More informationAL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand
AL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,690.00 $5,159.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm): Swing
More informationCoolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
More informationSTC Hydraulic grinding milling machine for cylinder heads and blocks. BERCO S.p.A. A Company of ThyssenKrupp
STC 361-1300 Hydraulic grinding milling machine for cylinder heads and blocks A Company of ThyssenKrupp BERCO S.p.A. The machine and its executions - from grinding wheel to tool: 1 - from tool to milling
More informationHeadquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan E
YEONG CHIN MACHINERY INDUSTRIES CO., LTD Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan sales@ GENERAL TEL : 886-4-2562-3211 SERVICE TEL : 886-4-2561-2965 FAX : 886-4-2562-6479 FAX
More informationTENSILKUT ENGINEERING
TENSILKUT ENGINEERING For Accurate Test Specimens Manufacturer of equipment for the accurate preparation of physical test specimens since 1955 SIEBURG INTERNATIONAL, INC. 1901 Clydesdale Street, Maryville,
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationServomill. Multipurpose Milling Machine Servomill. Conventional Multipurpose Milling Machine.
Multipurpose Milling Machine Conventional Multipurpose Milling Machine for workshop applications, single parts production and training purposes Servo motors and preloaded ball screws on all axes infinitely
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationTM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout
TM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout Ex GST Inc GST $23,900.00 $27,485.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres
More information