WOOD TOY NEWS Monday August 25, 2014 Contributing Editors Imants Udie and Bryan Udris How to Make Lumber with a Chain Saw
|
|
- Martin Weaver
- 5 years ago
- Views:
Transcription
1 WOOD TOY NEWS Monday August 25, 2014 Contributing Editors Imants Udie and Bryan Udris How to Make Lumber with a Chain Saw toymakingplans.com Imants Udris Udie with Bryan at the saw. How to Make Logs into Planks with a Chain Saw Using the home-made Udie Chain Saw Jig for Variable Width Planks. After the posting of the July 6, 2014 Wood Toy News titled Free Wood from Fallen Trees there have been numerous requests for a video demonstrating the Udie Chain Saw Jig for Variable Width Planks shown in full action. I am always happy to fulfill requests from the Forum members of ToymakingPlans.com. Visit Udie s Toymaking Forum at toymakingplans.com So sit back, have a beverage, relax and enjoy watching my son Bryan seriously cut some Oak. First thing I needed was a flat surface for the jig to ride along. It is nothing more than a 2 x 8 board screwed onto the log to be cut. The 2 x 4 s are used to stop the log from rocking on the table surface. They are not screwed down. 2 x 8 makes flat surface for Chain Saw Jig. We screwed a scrap piece of 2 x 8 to the top of the log to make a base for the chain saw jig to slide along as we advanced the running chain saw into the log. The 2 x 4 s on each side of the log kept the log from rolling over as we sawed. The 2 x 4 s were held in place by the weight of the log. This is an easy setup to adjust. The 2 x 4 s are used to stop the log from rocking on the table surface. They are not screwed down. With a little effort and patience you can cut through a pretty good sized log using this setup. Watch video at: 1 August 25, 2014 Monday
2 Mounting the chain saw to the jig is pretty straight forward. the photo below shows that the chain saw bar, not the motor, is is attached to the jig. Short pieces of metal have been welded to the clamping jig, which provide the proper spacing necessary for the chain to move freely. 3 depth of cut 3 depth of cut The depth of cut has been adjusted to cut a three inch depth for removing the bark. This is a very easy jig to make and has provided us with the capability of making excellent planks. Just for fun here s Bryan s dog, Calie. She never leaves his side. She s trying to tell us: OK guys, I was at the cottage with you guys this morning and you made a lot of noise there. Now we re back at home and you guys are still making noise! Enough is enough, I m tired of stealing your off-cuts, I m taking my hearing protection off and I am going into the house see ya! 2 August 25, 2014 Monday
3 We welded up our own saw jig. It took awhile to get it just right but now it is working like a charm. Watch video at: chain saw 3 depth of cut chain saw jig 3 depth of cut chain saw This is the complete setup in operation. The plank screwed to the log top provides a smooth surface for the chain saw jig slide on. The jig is pushed slowly and steadily along to flatten the top of the log. 3 August 25, 2014 Monday
4 I must tell you that to our surprise this log was still very wet causing a little more resistance than expected when we were cutting through it. However, everything worked out just fine. Shown below are the results of the first cut. You will discover that during the cut, stop the chain saw so you can insert some wedges or shims inside the cut to prevent the wood from pinching the chain and blade. This takes only a couple of minutes to do and will make the saw move a lot smoother and easier throughout the cut. FIRST CUT FIRST CUT Chain Saw and Jig First cut is completed. We are very pleased with how well it all went. First cut. SECOND CUT The second cut requires the plank to be screwed to the log as shown. The 2 x 4 s are placed in position to hold the log in place while sawing. 2 x 4 support is placed on both sides. Not only did we go thru many chains and bars but we also burned out 1 chain saw motor. When we went to buy a new replacement chain saw, we purchased another Poulan and it just so happened the tool rental department at Home Depot was selling a 20 Echo so we bought that one also. Shim or wedge stops prevents pinching. 4 August 25, 2014 Monday
5 SECOND CUT This surface will be laid flat on the table for the third cut. Great, now I have two flat edges, but I will need to create a third flat edge before I am able to start cutting the final planks. THIRD CUT THIRD CUT THIRD CUT The guide board is screwed in place for the third cut. The second cut has created a flat edge to rest against the table surface. The 2 x 8 plank is mounted to the log after turning the log. Here you can see the condition of the scrap 2 x 8 we used.the bottom surface had some damage and that s ok. All we need is one side of the scrap to be smooth so the saw will be easy to slide the length of the surface. The third cut is completed and we are ready to start cutting planks to the correct thickness for our projects. 5 August 25, 2014 Monday
6 Both Bryan and I are pretty pleased with the results of our first three cuts. The home-made jig, chain saw and setup worked great. Now we are ready to cut the various planks. The photo below shows the fourth cut that produces the first plank from the prepared log. There was no 2 x 8 required for a sliding surface because for the plank cuts the chain saw jig slides along while resting against a previously cut surface on the log. Watch video at: We cut our first plank around 3 wide which was the original setting for the sliding jig. We left the depth of cut the same because I liked the grain and I can use that thickness for a few of my future projects. FOURTH CUT I finished one sawn surface on the Jointer before band sawing the 4th side. First Plank 3 FOURTH CUT As you can see, there remains a live edge on our plank. Before I used the band saw I ran our plank through the jointer a couple of times just to make it a little smoother. This photo shows how easy it is to band saw the bark edge off the plank. Again, we did feel dampness in the wood. FINAL CUT ON BAND SAW 6 August 25, 2014 Monday
7 There you have it my fellow toymaking friends. This is how our Udris Workshop processes free wood logs into usable planks for toymaking and furniture projects. Yes, the band width could have been wider with less teeth to cut faster. I was just being lazy by not changing it. But, it does show you that with a standard blade you can do it. Believe me, you can also do this on a hobby size band saw. You don t need the big band saw. If you were to cut your planks to a thinner width, this would be an easy task for the table saw. FINAL CUT ON BAND SAW Really, it is not that difficult. It can make a big of mess with the amount of sawdust. Sometimes the noise is loud. Hearing protection should always be used. We did forget to put on our special chain saw helmet which has a wire mesh screen and ear muffs and I offer my apologies for that. Hope you enjoyed the article and I encourage you to start using found wood for your projects! Watch Udie s companion video at: We harvested several planks of various thicknesses from the log. Now we are ready to send them through the jointer to smooth and square up the surfaces. Found wood is a great resource for toymakers. Once you are set up it is easy to harvest. And it saves wood from the landfill which is also good for the environment. Udie can be contacted at: udris@cogeco.ca 7 August 25, 2014 Monday
WOOD TOY NEWS SANDING DRUMS & JIGS ISSUE
WOOD TOY NEWS SANDING DRUMS & JIGS ISSUE toymakingplans.com June 11, 2014 Wednesday How to Make a Sanding Drum Jig for Smarter Toymaking. By Imants Udris Udie Our discussion begins based on the 5 piece
More informationWOOD TOY NEWS. Master Toymaker Ken Martin is Lead Idea Man for the Martin Motors Car Carrier. May 4, 2014 Sunday. toymakingplans.
WOOD TOY NEWS A Wood Toy News Special Edition May 4, 2014 Sunday toymakingplans.com Master Toymaker Ken Martin is Lead Idea Man for the Martin Motors Car Carrier. This fun new toy plan set would ve never
More informationPAUL DAUNNO ADDS TOYMAKING TO HIS
WOOD TOY NEWS Monday January 26, 2015 PAUL DAUNNO ADDS TOYMAKING TO HIS VAST ARRAY OF WOODWORKING SKILLS. toymakingplans.com Meet Toymaker Paul Daunno I was born and raised in New Jersey and my father
More informationWOOD TOY NEWS. July 23, 2013 Tuesday
WOOD TOY NEWS Make your own perfect turntable for spray painting toys with these useful tips. And it s fast, fun and easy to build! by Imants Udris Watch the video on our website at : http://www.toymakingplans.com/website/how-to/
More informationSimple Soap Cutter. This first photo shows the cutter sitting on top of the two bricks and the 8 bar log ready to rock-n-roll.
Simple Soap Cutter I've had this thing sitting in the garage for a year now and forgot about it. Last month I discovered it again and decided to finish it off and give it a test run. The idea is not one
More informationWOOD TOY NEWS. May 23, 2014 Friday. Imants Udris is the Contributing Editor and Photographer for this issue of Wood Toy News.
WOOD TOY NEWS How to Router and Paint Wood Toys May 23, 2014 Friday toymakingplans.com Master Toymaker Imants Udris shows us how to router and paint the Freaky Fords. In this Wood Toy News and accompanying
More informationPerfect Tapers. on the Tablesaw. Make tapered legs of all types, quickly and safely
Perfect Tapers on the Tablesaw Make tapered legs of all types, quickly and safely B Y S T E V E L A T T A 30 F I N e W o o D W o r K I N G COPYRIGHT 2012 by The Taunton Press, Inc. Copying and distribution
More informationButterfly Leaf Dining Table Plans
Butterfly Leaf Dining Table Plans Part 1 An attractive dining table with a secret: the leaf folds and stores inside the table. Season 1, Episode 7 P a g e 2 I first saw a butterfly leaf table in a back
More informationCopyright 2014 Curtis B. Vevang Page Number 1
As described on the Woodcraft Website: This is a 9 hour class consisting of 3, 3 hour sessions. The purpose of this class is to introduce woodworking from the ground up. The student will build a tool/garden
More informationThe saw is not a decoration piece but sees regular use at the school. The cross pieces at either end are made from oak, the long stretchers are made
Roy s Saw When you walk in the front door of Roy Underhill s Woodright s School and look to your left in the window hanging above Roy s stuffed chicken is a large frame saw. Now the chicken is an interesting
More informationGENERAL NOTES: Page 1 of 9
Laminating A Zia Into A Turning Blank by W. H. Kloepping, Jan. 2009 This describes how a zia (the New Mexico state symbol) can be laminated into a turning blank. Materials needed: Square Turning Block
More informationWorking with Wood & Tools. Marking and Measuring. Tools you will need:
Marking and Measuring English Measure If you want to make pieces of a certain size, you will have to measure and mark them before you do any cutting. Examine a rule and find an inch mark. The mark (")
More informationIntroduction to Carpentry Power Tools
Youth Explore Trades Skills Introduction to Carpentry Power Tools Description s use power tools every day, and the ability to use these tools correctly and safely is paramount. In this Activity Plan, students
More informationMaking a Corian Desktop Pen Holder
Making a Corian Desktop Pen Holder Contributed by: Pete Ripaldi A.K.A pete00 This tutorial was downloaded from http://www.penturners.org The International Association of Penturners - 2016 Making a Corian
More informationPhase Two. The Skirt, Play Area and Sub Table ( continued )
Dry fit the skirt in place and make sure all is tight. Drill a countersink screw hole on the back of the skirt down where you will connect it to the bull nose. Make three holes on each board (ends and
More informationTM TM DOG HOUSE Age 9+
TM TM DOG HOUSE Age 9+ Safety First! Use eye protection, always! Use ear protection with loud power tools Stay with kids while they work! Follow tool manufacturers safety guidelines This project is recommended
More informationThe York Woodworkers Association
The York Woodworkers Association Newsletter for February 4, 2019 Turning A Bowl From A Log Greetings all and welcome to the February 2019 club newsletter. If you have suggestions for improvements, please
More informationWOOD TOY NEWS. Joel Ferreira Builds Noah s Magnificent Ark. toymakingplans.com. Monday July 20, 2015
WOOD TOY NEWS Monday July 20, 2015 Joel Ferreira Builds Noah s Magnificent Ark toymakingplans.com Joel Ferreira writes: A long time ago I purchased a plan set for your Noah s Magnificent Father-Son Ark.
More informationShaker Shop Stool. By Glen D. Huey
Shaker Shop Stool By Glen D. Huey By the turn of the decade following Mother Ann Lee s visit in 1783, the Massachusetts Shaker community known as Hancock began its existence. From a small gathering of
More informationPRO System with Dedicated Automatic Kerf Keeper Installation Manual - SP-2 (V1.0) 0706
SP2 Micro Jig, Inc. PO Box 195607 Winter Springs, FL 32719, USA. Tel: 1-407-696-6695 Web site: www.microjig.com Email: sales@microjig.com Copyright 2006 Micro Jig, Inc. MJ Splitter PRO System with Dedicated
More informationWhile one of the most
Plans NOW www.plansnow.com TOOLS & TECHNIQUES SERIES While one of the most useful tools for cutting joints is a dado blade, selecting which type to buy can be a little bit confusing. To simplify it, all
More informationLumber Smith. Owners Manual. If you are having problems assembling the saw and need assistance, please contact us at:
Lumber Smith Owners Manual If you are having problems assembling the saw and need assistance, please contact us at: 804-577-7398 info@lumbersmith.com 1 General Safety Instructions Failure to follow these
More informationCan-Do Can Crusher. America s leading woodworking authority. Step by Step construction instruction. A complete bill of materials.
America s leading woodworking authority Can-Do Can Crusher Step by Step construction instruction. A complete bill of materials. Exploded view and elevation drawings. How-to photos with instructive captions.
More informationAbout.com :
http://woodworking.about.com/gi/dynamic/offsite.htm?sit...//www.popularwoodworking.com/features/fea.asp%3fid=1088 (1 of 8)1/28/2004 12:05:01 AM Modern Storage Tower The last thing I want to do when starting
More informationSquaring Up Rough lumber BY JOE HURST-WAJSZCZUK
LESSONS FROM A PRO Squaring Up Rough lumber BY JOE HURST-WAJSZCZUK Straight, flat, square boards aren t born that way. master this step-by-step sequence to make any stock shop-ready. 58 w o o d c r a f
More informationCastle loft bed [1] Additional Photos. Castle loft bed Published on Ana White (http://www.ana-white.com)
[1] Submitted by fsmumford [2] on Tue, 2011-10-18 21:51 [1] Additional Photos [3] [4] Page 1 of 31 [5] [6] [7] Summary: I stumbled upon Ana s blog about a year ago. Since, like many of you, I have become
More informationGrade 11 Woods Lift Lid Coffee Table. Based on Under the big Top from Popular Mechanics Website
Grade 11 Woods Lift Lid Coffee Table Based on Under the big Top from Popular Mechanics Website TABLE TOP 1. Select enough lumber to construct a top that is between 22 ½ and 24 wide after jointing. Ensure
More informationSome Thoughts About Tools
Some Thoughts About Tools So some of you builders will have your own way to do things but I d like to share you mine. I m using regular tools you can buy at the box stores. Nothing special. They arent
More informationLumber Smith. Assembly Manual. If you are having problems assembling the saw and need assistance, please contact us at:
Lumber Smith Assembly Manual If you are having problems assembling the saw and need assistance, please contact us at: 804-577-7398 info@lumbersmith.com 1 Step 1 Safety Carefully read the Owners Manual.
More informationCutless Bearing Removal and Replacement for a Watkins 27 By John Everson
Cutless Bearing Removal and Replacement for a Watkins 27 By John Everson This is a fairly difficult job, but if you are mechanically inclined and want to save a significant amount of cash, you might want
More informationTen Essential. These bits will conquer the majority of woodworking tasks. b y G a r y R o g o w s k i. Operating: handheld vs.
Ten Essential Router Bits These bits will conquer the majority of woodworking tasks b y G a r y R o g o w s k i You ve bought a new router, unpacked it, and even found the switch on it. But that s only
More informationJointer. Given a properly adjusted jointer, instruction and demonstration of use, each student will be able to:
Jointer I. Competencies Given a properly adjusted jointer, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the jointer. B. Complete a written test on
More informationWOOD TOY NEWS. Imants Udris keeps his workshop buzzing with tests, projects and professionalism. August 11, 2013 Sunday. toymakingplans.
WOOD TOY NEWS toymakingplans.com August 11, 2013 Sunday Imants Udris keeps his workshop buzzing with tests, projects and professionalism. Intro by John Lewman, Owner ToymakingPlans.com We love getting
More informationDigital Patterns. Designed by Steve Good
WWW.SCROLLSAWWORKSHOP.BLOGSPOT.COM Digital Patterns Designed by Steve Good Hundreds of free Patterns Stencil Printer Jigsaw Puzzle Templates DVD s Key Chain Pattern Printer Video Tutorials Reviews Community
More informationLift Top Coffee Table [1]
[1] Submitted by Dave M [2] on Mon, 2015-03-30 15:40 Page 1 of 14 [1] Additional Photos [3] [4] [5] Page 2 of 14 [6] It all started when my significant other and I decided that we wanted to get the ugly
More informationStep-by-Step Instructions for Making the Wall-hung Bookcase
Step-by-Step Instructions for Making the Wall-hung Bookcase When a piece of furniture has an air and look of simplicity, you can be sure that it deftly conceals the complexity of its making. I wanted this
More information15 Dovetail Jig. Instruction Manual. Part # 3452
15 Dovetail Jig Instruction Manual Part # 3452 CAUTION: Please read, understand, and follow all manufacturers instructions, guidelines and owners manuals that come with your power tools. Peachtree Woodworking
More informationFIRST GRADE FIRST GRADE HIGH FREQUENCY WORDS FIRST 100 HIGH FREQUENCY WORDS FIRST 100
HIGH FREQUENCY WORDS FIRST 100 about Preprimer, Primer or 1 st Grade lists 1 st 100 of again 100 HF words for Grade 1 all am an are as away be been before big black blue boy brown but by came cat come
More informationEmpire Dresser Plans
1 Empire Dresser Plans Materials 1 sheet 3/4" plywood (cabinet grade 4' x 8') 1 sheet 5 mm (3/16") underlayment plywood 4'x 8', buy another 1/2 sheet if you want to put a back on the dresser. 1-2" x 4"
More informationNineteenth-Century Dough Box
Nineteenth-Century Dough Box T he dough box was a functional piece found in many a country kitchen. The idea was that the cook would make a large batch of bread dough, knead it on the large work surface
More informationSeascape Bungalow Assembly instructions. Laser Dollhouse Designs
Seascape Bungalow Assembly instructions Laser Dollhouse Designs NOTE: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and fit. This also
More informationHalf-Blind Dovetails in Half the Time
Half-Blind Dovetails in Half the Time Get the hand-cut look with the speed and consistency of machines B Y S T E P H E N H A M M E R Bandsawn tails Zip, zip. A simple jig delivers accurate and uniform
More informationHANDCRAFTED LIDDED CHEST IN CHERRY With Red Cedar Lining
HANDCRAFTED LIDDED CHEST IN CHERRY With Red Cedar Lining Design A chest was desired as a gift to family. The Shaker style of furniture was identified as a pleasing style. After viewing a number of pictures
More informationWays to get the most out of your
5 Ways to get the most out of your router table When you mount a router on a table, you expand your shop s potential. To help you take advantage of this potential, we assembled five router table techniques
More informationGuild of Oregon Woodworkers Shop Safety Test
Guild of Oregon Woodworkers Shop Safety Test You must pass the Test with an 80% or better and self-correct it to 100% Make sure you put the answers under the correct portion of the answer sheet for the
More informationEXTREME LOAD no. TWO
1602 - EXTREME LOAD no. TWO Kit Features: 22' 4 " x 14' x 3'-6 Oversize Load 49mm (1.9") actual height Bolt Head Details Welded Load Mounting Fins Painting Handles Tools Required: Hobby Knife Tweezers
More informationStand & Bowls. optional. Online Extra
Online Extra optional Stand & Bowls Once you make a bowl using the jig and technique from Woodsmith No. 229, it s only natural to see what else you can do with it. The starting point is to make copies
More informationWindsor Chair Online. Assembly Instructions
Windsor Chair Online Assembly Instructions Date: 1/4/2007 Other Chairs Offered Philadelphia Arm Chair New England Comb Back Sackback d Arm Chair Bow Back Side Chair Fan Back Side Chair Page 1 Table of
More informationPrint Page Close Window
Page 1 of 16 Print Page Close Window Rivet Punch & Die Tooling Printed from: mylargescale.com Forums Topic URL: http://www.mylargescale.com/forum/topic.asp?topic_id=36536 Printed on: 30 Jan 2006 Topic:
More informationHow to Cut a Handlebar for Installation of PadLoc Grips. How to Cut a Handlebar for Installation of PadLoc Grips
How to Cut a Handlebar for Installation of PadLoc Grips How to Cut a Handlebar for Installation of PadLoc Grips Tools required 8. 5. 6. 7. 9. 4. 3. 2. 1. Bars with PadLoc Markings 1. Park SG-7.2 Saw Guide
More informationThe Universal Table Saw Sled
The Universal Table Saw Sled Do Precision Work Even with Inexpensive Table Saws! Table saw blades always tend to move the wood while the cut is being made. This is why it's so difficult to get accurate
More informationA Pictorial of David Dawes AA400 HFT Thumbhole Stock in the Making
DRAFT Version A Pictorial of David Dawes AA400 HFT Thumbhole Stock in the Making Part 1 and finally Part 2 as well Updated: February 2008 By James Mitchell (a.k.a. mitchejc) Note: Building rifle stocks
More informationWorkbench. Process Guide
Workbench Process Guide Design, Lumber, Tools & Nails Made entirely from 2x and 4x construction lumber Hardware speeds up the consturction while also reduces the amount of planing we have to do by using
More informationCV1B Sliding Table Installation and Setup Guide
CV1B Sliding Table Installation and Setup Guide Tech Mark, Inc 7901 Industry Drive North Little Rock, AR 72117 tel (501) 945-9393 fax (501) 945-0312 www.tech-mark.com email: info@tech-mark.com The CV1B
More informationCollege of Forestry 610: Power Tools
College of Forestry 610: Power Tools Safety Policy & Procedure Manual Section 600: Workshops and Shop Tools Effective: 01 January 2007 Revised: August 2014 PURPOSE The purpose of this section is to provide
More informationCNC Using the FlexiCam CNC and HMI Software. Guldbergsgade 29N, P0 E: T:
CNC Using the FlexiCam CNC and HMI Software Guldbergsgade 29N, P0 E: makerlab@kea.dk T: +46 46 03 90 This grey box is the NC controller. Let s start by turning the red switch to the ON position, then press
More informationENJOY THIS SELECTION FROM. Woodworking 101. Includes Step-by-Step Instructions for 8 Projects. Woodworking
W ENJOY THIS SELECTION FROM Woodworking 101 Includes Step-by-Step Instructions for 8 Projects Woodworking 101 Aimé Fraser, Matthew Teague, and Joe Hurst-Wajszczuk To purchase your copy of Woodworking 101,
More informationHardware Cabinet. Part 3
Hardware Cabinet Part 3 The vertical dividers are the next task on the cabinet and a bit of a trick to get right. The horizontal dividers are only ½ thick pine spanning the 31 width of the cabinet and
More informationDIY X Panel Side Table
DIY X Panel Side Table *Before beginning this project, please read through all of the plans as well as the blog post associated with this project. Always use safety precautions whenever using power tools
More informationOSU Woodshop Safety Manual
OSU Woodshop Safety Manual The College of Forestry currently has two dedicated woodshops: the Oak Creek Woodshop (OCW) and the Kiln Bay Woodshop (KBW). No person may use OCW or KBW before completing the
More informationFig01 A 1/8" x 1/2" parting tool, which is the raw material for the Shear Spear. Fig02 After marking a 45 on the end of the parting tool.
Shear Spear Introduction The pyramid point tool is a versatile tool that leaves a good surface off the tool because when held horizontally it automatically works as a shear scraper. But the point of the
More informationPump Replacement Manual. Bill Wallace by Wallace Marine Services, Inc.
by Wallace Marine Services, Inc. Maintain Your Equipment The Easy Way Bill Wallace 843-693-4336 info@willyvac.com www.willyvac.com Pump Replacement Manual 1 How to change the water pump on the Willy Vac
More informationBE CAREFUL Safety precautions should be taken when using tools, especially power tools. Please exercise caution.
PLEASE NOTE: A VIDEO HAS BEEN LAUNCHED ON OUR WEBSITE KEYHOLEFARM.COM THAT OFFERS THE EASY WAY TO CONSTRUCT THE KEYHOLE GARDEN FRAME. IT IS UNDER THE MENU ITEM EXTRAS IN THE UPPER RIGHT-HAND CORNER AREA.
More informationThe Queen Quilter Professional Quilters Kit Frame
The Queen Quilter Professional Quilters Kit Frame Assembly Instructions Table of Contents: Before you begin......................... Pg. 2 Wood parts............................. Pg. 3 Hardware..............................
More informationZen Toolworks CNC Carving Machine DIY Kit User Installation Manual
User Installation Manual Visit Us At: http://www.zentoolworks.com or http://www.zentoolworks.com/zenwiki/mediawiki Contact Us At: zentoolworks@gmail.com 1 P-01, Nema 17 Stepper Motor, 3 P-02, Motor Shaft
More informationLock on! Chris Tribe shows you how to cut a lock into the back of a door and fit an escutcheon
Technique Lock on! Chris Tribe shows you how to cut a lock into the back of a door and fit an escutcheon Pic.1 Chris fitted this oak display cabinet with a cut lock and covered his precise work with a
More informationAmerica s leading woodworking authority To download these plans, you will need Adobe Reader installed on your computer. If you want to get a free copy, visit: http://adobe.com/ reader. Having trouble downloading
More informationLaminated Furniture Components
Laminated Furniture Components Dec 2010 Woodworkers Simple Round Cherry Table Fritz Smith Cherry - 2008 Woodworkers 2 Snowboard Bench Fritz Smith White Oak Snowboard - 2009 Woodworkers 3 Fritz Smith Shell
More informationSmall Town Buildings. Scaled and easy to read patterns and instructions. Shoe / Western Union (with and without porch)
1 /24 th Scale Patterns kiva design G R O U P E 1 Story Flat Roof Yard and Garden Buildings Compatible with Garden Railroads or a delight for any child's collection Overall Dimensions Foundation: 10" x
More informationSlicing Jig For Pen Inlays
Slicing Jig For Pen Inlays By Randall Smith (randyrls) May 2008 This article has been downloaded from the library of the International Association of Penturners. www.penturners.org You are welcome to reproduce
More informationClose Encounters of the Bird Kind
Close Encounters of the Bird Kind Building some bird housing will improve your libido as the natural forces of Spring work their magic. Materials: ¾", 2" and 3" exterior screws 1" x 8" pine or spruce 1"
More informationClassic Kitchen Island
America s leading woodworking authority Step by Step construction instruction. A complete bill of materials. Classic Kitchen Island Exploded view and elevation drawings. How-to photos with instructive
More informationRelated Articles: Index of Siding and Exterior Trim Articles Index of Window Articles
Garage Remodel: In This Article: Case 1: Vinyl Window, New Sill Case 2: Aluminum Window, Old Sill Caulking Notes On Using Treated Yellow Pine Tools and Materials Related Articles: Index of Siding and Exterior
More informationMachine Quilting Frame assembly, and instruction manual
Machine Quilting Frame assembly, and instruction manual Table of Contents Parts List................. Pg. 2 Step 1 - Legs............... Pg. 4 Step 2 - Lower Leg Brace....... Pg. 5 Step 3 - Frame Ends..........
More informationA quick and easy way to make a hidden reinforced miter joint
A quick and easy way to make a hidden reinforced miter joint Text and photos by Jerry Work 2011 Carefully mitered corners add a touch of elegance to any square or rectangular piece. The problem is they
More informationBENCH MORTICER. Woodworking Equipment Bench Morticer with Sliding Table. trade level
BENCH MORTICER 01944 Bench Morticer with Sliding Table A compact bench mounted morticer giving high levels of accuracy, ease of use with industrial features at an affordable price. An important feature
More informationCOMPLIMENTARY WOODWORKING PLAN
COMPLIMENTARY WOODWORKING PLAN COFFEE TABLE PLAN This downloadable plan is copyrighted. Please do not share or redistribute this plan in any way. It has been paid for on your behalf by JET Tools, a division
More information35. Welded edge is good. If it has heavy rust blast it first for the weld to flow out and adhere properly.
35. Welded edge is good. If it has heavy rust blast it first for the weld to flow out and adhere properly. 36. Remove the spoon and you can see how smoother the back side is with hardly any grinding needed.
More informationSo once you get your 12 pieces sewn together, that s going to give you the width for your background fabric. And then I went ahead and sewed 8 half ch
Hi, I m Jenny from the Missouri Star Quilt Company. Every time I do a trunk show, I show this wall hanging. I ve fallen in love with the Dresden, and I show a lot of different Dresden things, and this
More informationHOW I BUILD A DOOR Ed Hollingsworth Omaha, Nebraska
HOW I BUILD A DOOR Ed Hollingsworth Omaha, Nebraska Some years ago, my wife and I bought a small wooded acreage in the bluffs above the Missouri River valley north of Omaha, Nebraska. My plan was to make
More informationRatcheting and Angled Leg Vises. Ratcheting Parallel Guide
Ratcheting and Angled Leg Vises Ratcheting Parallel Guide In Scott Landis s The Work Bench Book there is a drawing of a ratchet mechanism for a parallel guide. It was one of those little tidbits I tend
More informationVERSION 1.0 JANUARY 5, 2013 R2-ATL MOTOR MOUNT KIT ASSEMBLY GUIDE ASTROMECH DRIVE SYSTEM
VERSION 1.0 JANUARY 5, 2013 R2-ATL MOTOR MOUNT KIT ASSEMBLY GUIDE ASTROMECH DRIVE SYSTEM R2-ATL MOTOR MOUNT KIT PURPOSE The R2-ATL motor mount is designed for use in Astromech s Droids up to 300 pounds.
More informationExtendable Large Dovetail Jig
Extendable Large Dovetail Jig Instruction Manual Part # 3458 CAUTION: Please read, understand, and follow all manufacturers instructions, guidelines and owners manuals that come with your power tools.
More informationCrafting a Dizzy Bowl
Crafting a Dizzy Bowl Visit Youtube.com Visit Youtube.com In the search section type dizzy bowl and you will find dozens of videos about turning dizzy bowls. Visit Youtube.com In the search section type
More informationVisualization & construction of simple rotors for micro wind turbines
Visualization & construction of simple rotors for micro wind turbines John, Jafar & friends - 2002-2003 BLADE CARVING Friends: It has been our objective to conduct research into "construction and
More informationUpdated Tryde Coffee Table - Pocket Holes [1]
[1] Submitted by Ana White [2] on Tue, 2012-10-30 15:31 [1] Last Thursday we had our Third Birthday! I've been so exhausted from the flu and catching up on emails and the blog, I didn't even know! We have
More informationAN IMPROVED VANDERWILT ROCK SAW G. D. Eurcn, Uniaersity of Arizona, Tucson, Arizona.
AN IMPROVED VANDERWILT ROCK SAW G. D. Eurcn, Uniaersity of Arizona, Tucson, Arizona. A simple and inexpensive device for sawing rock specimens up to 7 inches square in cross section was designed and described
More informationFurnace build report
Furnace build report Cheap and Free Rick is the president of the Metro Detroit Metalworking Club. A few weeks ago we spent the better part of a Sunday over at C&F Rick s house while some aluminum casting
More informationMaking Cam Action Edge Clamps, version 2 *
Making Cam Action Edge Clamps, version 2 * By R. G. Sparber 01/15/2008 Copyleft protects this article. The idea of making these clamps came from Brian Lamb. They work great. If you have more money than
More informationEngineering Directive
Thing-a-ma-Jig Finishing To Finish a model means to apply paint and other decorations to complete the look of your model. Meaning to apply a finish. That is what we will discuss in this section. Applying
More informationEchos From the BAT. Cave. David Ellsworth. Baltimore Area Turners. Inside this issue: David Ellsworth 2 D&D Log Cradle 5 Other Stuff 6.
Echos From the BAT Baltimore Area Turners Cave March, 2012 David Ellsworth Inside this issue: David Ellsworth 2 D&D Log Cradle 5 Other Stuff 6 2012 Officers: In March, BAT was graced with a visit by Grandmaster
More informationMini Max 20 BAND SAW
OPERATING PROCEDURE FOR: Mini Max 20 BAND SAW SAFETY RULES: Warning: Willful violations of these safety rules, disruptive actions or horseplay may result in loss of the privilege to use the tools and machinery
More informationWoodturning Tip Dec Make a Bow Knife
Woodturning Tip Dec. 2009 Make a Bow Knife It s sure great to be back in the shop again. After several weeks of not being able to stand in front of the lathe for more that a couple of minutes before having
More informationChapter Six. Getting started inboard. Installing the false deck
A close look at the thinning down of the bulkhead extensions. They are just 1/16 thick after fairing them. Chapter Six Getting started inboard This next step is one of the last remaining messy tasks to
More informationThis Jig Sucks for Ripping Thin Strips
This Jig Sucks for Ripping Thin Strips Contributed by: Branden Wong A.K.A Penl8the This tutorial was downloaded from http://www.penturners.org The International Association of Penturners - 2013 This Jig
More informationA Tale of Two Budget Moxons
The two budget Moxons one with hardware the author made, and one with hardware she purchased. Within the hand-tool woodworking community, there has been all kinds of buzz recently about Moxon vises. So
More informationToolpost for HBM 290 lathe
Toolpost for HBM 290 lathe When I bought a new lathe it came with just a square toolpost so I had to use shims to get the tool to correct height. I decided to make a simple toolpost with tool-holders with
More informationDress up your dining room with this Southern delicacy. that was used to serve drinks after a hunt. Breeches and jodhpurs are optional.
Dress up your dining room with this Southern delicacy that was used to serve drinks after a hunt. Breeches and jodhpurs are optional. Huntboard Classic Six-Legged My dad has been making this six-legged
More informationEco Office File Base. Materials and Tools: Free Plans to build an office file cabinet base
Materials and Tools: Materials: 1 - Sheet 3/4 PureBond Hardwood Plywood (Available at the Home Depot) 1 - Sheet 1/4 PureBond Hardwood Plywood (Available at the Home Depot) 3-21 Drawer Slides, Euro Style
More informationWood Christmas Tree Base [1]
[1] Submitted by Ana White [2] on Mon, 2014-12-08 14:34 [1] Well, here we are, well into December, well past Thanksgiving... and no tree up yet. I've been dreading putting a tree up. Page 1 of 31 And here's
More information