TS931ILT/AILT/BILT SOT23-5L Tape & Reel
|
|
- Dylan Stokes
- 5 years ago
- Views:
Transcription
1 Output Rail-to-Rail Micropower Operational Amplifiers n Rail-to-rail output voltage swing n Micropower consumption (µa) n Single supply operation (.7V to V n Low offset (mv max for TS93xB) n CMOS inputs n Ultra low input bias current (1pA) n ESD protection (kv) n Latch-up immunity (class A) n Available in SOT3-5 micropackage Description The TS93x (single, dual & quad) series are operational amplifiers able to operate with voltage as low as.7v and to reach.9vpp of output swing with R L = kω when 3V. Offering a typical consumption of only µa, they are particularly well-suited for battery-powered applications. Fitting the TS93x onto your board design is very easy because of its space-saving 5-pin SOT3-5 package with outer dimensions of.8mm x.9mm. Applications n Battery-powered systems n Portable communication systems n Alarm, smoke detectors n Instrumentation & sensoring n PH Meter Digital scales n Pin Connections (top view) TS931ILT TS931ID-TS931IDT TS93IN-TS93ID-TS93IDT TS934IN-TS934ID-TS934IDT-TS934IPT Order Codes Part Number TS931ID/IDT/AID/AIDT/BID/BIDT Temperature Range Package Packaging Marking TS93IN/AIN/BIN DIP Tube -4 C, +85 C TS93ID/IDT/AID/AIDT/BID/BIDT SO Tube or Tape & Reel TS934IN/AIN/BIN DIP Tube TS934ID/IDT/AID/AIDT/BIDT/BIDT SO Tube or Tape & Reel TS934IPT/AIPT/BIPT TSSOP (Thin Shrink Outline Package) Tape & Reel December 4 Revision 1/15 SO Tube or Tape & Reel TS931ILT/AILT/BILT SOT3-5L Tape & Reel K5 K6 K7
2 Absolute Maximum Ratings 1 Absolute Maximum Ratings Table 1: Key parameters and their absolute maximum ratings Symbol Parameter Value Unit VCC Supply voltage 1 1 V Vid Differential Input Voltage ±1 V V in Input Voltage Range 3 Vdd-.3 to Vcc+.3 V T oper Operating Free Air Temperature Range -4 to + 85 C T std Storage Temperature Range -65 to +15 C T j Maximum Junction Temperature 15 C R thja Thermal Resistance Junction to Ambient 4 SOT3-5 DIP8 DIP14 SO8 SO14 TSSOP8 TSSOP14 ESD HBM: Human Body Model 5 kv MM: Machine Model 6 V CDM: Charged Device Model kv Latch-up Immunity ma Soldering Temperature (sec), leaded version 5 C 1) All voltages values, except differential voltage are with respect to network terminal. ) Differential voltages are non-inverting input terminal with respect to the inverting input terminal. 3) The magnitude of input and output voltages must never exceed V CC +.3V. 4) Short-circuits can cause excessive heating and destructive dissipation. 5) Human body model, pf discharged through a 1.5kΩ resistor into pin of device. 6) Machine model ESD, a pf cap is charged to the specified voltage, then discharged directly into the IC with no external series resistor (internal resistor < 5Ω), into pin to pin of device C/W Table : Operating Conditions Symbol Parameter Value Unit VCC Supply Voltage.7 to V Vicm Common Mode Input Voltage Range V dd -. to V CC V T oper Operating Free Air Temperature Range -4 to + 85 C /15
3 Electrical Characteristics Electrical Characteristics Tables 3 and 4 give the electrical characteristics at each V cc value. Table 3: V CC = +3V, V dd = V, T amb = 5 C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit V io Input Offset Voltage TS931//4 TS931//4A TS931//4B V io Input Offset Voltage Drift 3 µv/ C 5 mv I io Input Offset Current 1 1 pa I ib Input Bias Current 1) 1 15 pa CMR Common Mode Rejection Ratio V icm V CC db SVR Supply Voltage Rejection Ratio 85 db A vd Large Signal Voltage Gain V O = Vpp R L = 1MΩ R L = kω 1 6 db V OH V OL High Level Output Voltage V ID = mv R L = kω.95 Low Level Output Voltage V ID = -mv R L = kω 5 V mv I o Output Source Current V ID = mv, V O = V DD Output Sink Current V ID = -mv, V O = V CC ma I CC Supply Current (per amplifier) A VCL = 1, no load 31 µa GBP Gain Bandwidth Product R L = kω, C L = 5pF khz SR Slew Rate R L = kω, C L = 5pF 5 V/ms φm Phase Margin C L = 5pF 65 Degrees en Input Voltage Noise 75 nv/ Hz 1) Maximum values including unavoidable inaccurates of the industrial test. ) V CC has a.v variation. 3/15
4 Electrical Characteristics Table 4: V CC = +5V, V dd = V, T amb = 5 C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit V io Input Offset Voltage TS931//4 TS931//4A TS931//4B V io Input Offset Voltage Drift 3 µv/ C I io Input Offset Current 1 1 pa I ib Input Bias Current 1) 1 15 pa 5 mv CMR Common Mode Rejection Ratio V icm V CC db SVR Supply Voltage Rejection Ratio 85 db A vd Large Signal Voltage Gain V O = 4Vpp R L = 1MΩ R L = kω 1 11 db V OH V OL High Level Output Voltage V ID = mv R L = kω 4.95 Low Level Output Voltage V ID = -mv R L = kω 5 V mv I o Output Source Current V ID = mv, V O = V DD Output Sink Current V ID = -mv, V O = V CC 5 5 ma I CC Supply Current (per amplifier) A VCL = 1, no load 33 µa GBP Gain Bandwidth Product R L = KΩ, C L = 5pF khz SR Slew Rate R L = KΩ, C L = 5pF 5 V/ms φm Phase Margin C L = 5pF 65 Degrees en Input Voltage Noise 76 nv/ Hz 1) Maximum values including unavoidable inaccurates of the industrial test. ) V CC has a.v variation. 4/15
5 Electrical Characteristics Figure 1: Figure 4: Input Offset Voltage Drift ( µ V) Vcc=5V Supply Current ( µ A) Tamb=5 C Temperature ( C) Supply Voltage (V) Figure : Figure 5: 1 1 Vid=-mV Vcc from.7v to V Vid=+mV Supply Current ( µ A) Tamb=5 C Supply Current ( µ A) Supply Voltage (V) Temperature ( C) Figure 3: Figure 6: Output Short-Circuit Current (ma) 6 Isink, Vcc=5V 4 Isink, Vcc=3V Isource, Vcc=3V - -4 Isource, Vcc=5V Temperature ( C) Output Short-Circuit Current (ma) 3 Tamb=5 C Sink - Source Supply Voltage (V) 5/15
6 Electrical Characteristics Figure 7: Figure : Output Short-Circuit Current (ma) Sink T=+5 C T=-4 C T=-4 C T=+5 C Vcc=.7V Source Output Voltage (V) Output Short-Circuit Current (ma) Sink T=+5 C T=-4 C T=-4 C T=+5 C Vcc=3V Source Output Voltage (V) Figure 8: Figure 11: Output Short-Circuit Current (ma) 6 4 Sink Vcc=5V - -4 T=+5 C -6 T=-4 C T=-4 C T=+5 C Source Output Voltage (V) Output Short-Circuit Current (ma) 3 Sink - - T=+5 C T=-4 C T=-4 C T=+5 C Vcc=V Source Output Voltage (V) Figure 9: Figure 1: Voltage referenced to Vcc (mv) RL tied to VDD SINGLE SUPPLY Vid = +mv RL = k Ω RL = k Ω RL = 1M Ω Supply Voltage (V) Voltage referenced to VDD (mv) RL tied to Vcc SINGLE SUPPLY Vid = -mv RL = k Ω RL = k Ω RL = 1MΩ Supply Voltage (V) 6/15
7 Electrical Characteristics Figure 13: Figure 16: RL = k CL = 5 pf Vcc = 3V & 5V RL = k CL = pf Vcc = 3V & 5V Gain (db) 4 3 Gain Phase 1 Phase ( ) Gain (db) 4 3 Gain Phase 1 Phase ( ) ,, 5,,, 5,, Frequency (Hz) 4 5 1,, 5,,, 5,, Frequency (Hz) Figure 14: Figure 17: 1.8 RL=k Gain = RL=k Gain = + F = Hz Distortion (%).6.4 Vcc=5V Vo=4Vpp Vcc=3V Vo=Vpp Distortion (%) 1 Vcc=3V..5 Vcc=5V 5 5 1,, 5,, Frequency (Hz) Output Voltage (Vpp) Figure 15: Figure 18: -4 Equivalent Noise Voltage (nv/ Hz) Vcc=.7V Rs = Tamb = 5 C Supply Voltage Rejection (db) Vcc = 5V Gain = , 3,, Frequency (Hz) , 3,, 3,, 3, 1,, Frequency (Hz) 7/15
8 Electrical Characteristics Figure 19: Figure : Voltage (5mV/div) INPUT V Vcc = 5V Gain = +1 RL = k CL = 5pF Voltage (1V/div) INPUT V Vcc = 5V Gain = +1 RL = k CL = 5pF Time ( µ s) OUTPUT V OUTPUT V Time ( µ s) 8/15
9 Package Mechanical Data 3 Package Mechanical Data 3.1 DIP8 package Plastic DIP-8 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A a1.7.8 B B b.5. b D E e.54. e e F I L Z P1F 9/15
10 Package Mechanical Data 3. SO8 package SO-8 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A A A B C D E e H h L k 8 (max.) ddd /C /15
11 Package Mechanical Data 3.3 DIP14 package Plastic DIP-14 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. a1.51. B b.5. b1.5. D.787 E e.54. e F I L Z P1A 11/15
12 Package Mechanical Data 3.4 SO14 package SO-14 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A a a b b C.5.19 c1 45 (typ.) D E e e F G L M.68.6 S 8 (max.) PO13G 1/15
13 Package Mechanical Data 3.5 TSSOP14 package TSSOP14 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A A A b c D E E e.65 BSC.56 BSC K 8 8 L A A A1 b e c K L E D E1 PIN 1 IDENTIFICATION D 13/15
14 Package Mechanical Data 3.6 SOT3-5 package SOT3-5L MECHANICAL DATA DIM. mm. mils MIN. TYP MAX. MIN. TYP. MAX. A A A b C D E E e e L /15
15 Summary of Changes 4 Summary of Changes Date Revision Description of Changes 1 Nov 1 1 First Release 1 Dec 4 Modifications on AMR table page (explanation of Vid and Vi limits) Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners 4 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America 15/15
TSV321-TSV358-TSV324. General Purpose, Input/Output Rail-to-Rail Low Power Operational Amplifiers. Description. Applications
General Purpose, Input/Output Rail-to-Rail Low Power Operational Amplifiers Operating at V CC = 2.5V to 6V Rail-to-rail input & output Extended V icm (V DD -.2V to V CC +.2V) Capable of driving a 32Ω load
More informationPart Number Temperature Range Package Packing Marking. DIP14 Tube LM2902N LM2902D/DT SO-14 Tube or Tape & Reel
Low Power Quad Operational Amplifier Wide gain bandwidth: 1.3MHz Input common-mode voltage range includes ground Large voltage gain: 1dB Very low supply current per amp: 375µA Low input bias current: 2nA
More informationNon-inverting input 1. Part Number Temperature Range Package Packing Marking. 4558C MC4558CPT TSSOP8 Tape & Reel MC4558IN
Wide Bandwidth Dual Bipolar Operational Amplifier Internally compensated Short-circuit protection Gain and phase match between amplifier Low power consumption Pin-to-pin compatible with MC1458/LM358 Gain
More information1.8 V input/output, rail-to-rail, low power operational amplifiers. Reference. TS185x TS1851 TS1852 TS1854. TS185xA TS1851A TS1852A TS1854A
1.8 V input/output, rail-to-rail, low power operational amplifiers Features Operating range from V CC = 1.8 to 6 V Rail-to-rail input and output Extended V icm (V CC- -.2 V to V CC + +.2 V) Low supply
More informationTSM100 SINGLE OPERATIONAL AMPLIFIER AND SINGLE COMPARATOR
OPERATIONAL AMPLIFIER LOW INPUT OFFSET VOLTAGE : 0.5 typ. MEDIUM BANDWIDTH (unity gain) : 0.9MHz LARGE OUTPUT VOLTAGE SWING : 0V to (V CC - 1.5V) INPUT COMMON MODE VOLTAGE RANGE INCLUDES GROUND WIDE POWER
More informationTSM106. Dual Operational Amplifier and Voltage Reference. Operational Amplifier: Voltage Reference: PIN CONNECTIONS (top view) DESCRIPTION ORDER CODES
Dual Operational Amplifier and Voltage Reference Operational Amplifier: Low input offset voltage: 1 typ. Medium bandwidth (unity gain): 0.9MHz Large output voltage swing: 0V to (V CC - 1.5V) Input common
More informationInverting Input 1. Non-inverting Input 1
Micropower Dual CMOS Voltage Comparators Extremely low supply current: 9µa typ/comp. Wide single supply range 2.7V to 6V or dual supplies (±.35V to ±8V) Extremely low input bias current: pa typ. Extremely
More informationLMV321-LMV358-LMV324. Low cost low power input/output rail-to-rail operational amplifiers. Features. Applications. Description LMV321ILT (SOT23-5)
Low cost low power input/output rail-to-rail operational amplifiers Features Operating range from V CC = 2.7V to 6V Rail-to-rail input and output Extended V icm (V DD -.2V to V CC +.2V) Low supply current
More informationMC33172 MC Low power dual bipolar operational amplifiers. Features. Description
Low power dual bipolar operational amplifiers Features Good consumption/speed ratio: only 200 µa for 2.1MHz, 2V/µs Single (or dual) supply operation from +4 V to +44V (±2V to ±22V) Wide input common mode
More informationTS27L4. Very low power precision CMOS quad operational amplifiers. Features. Description
Very low power precision CMOS quad operational amplifiers Features Very low power consumption: µa/op Output voltage can swing to ground Excellent phase margin on capacitive loads Unity gain stable Two
More informationDIP14 Tube LM2901N LM2901D/LM2901DT SO-14 Tube or Tape & Reel
LM2901 Low Power Quad Voltage Comparator Wide single supply voltage range or dual supplies for all devices: +2V to +36V or ±1V to ±18V Very low supply current (1.1mA) independent of supply voltage (1.4mW/comparator
More informationLMV321, LMV358, LMV324
Low cost, low power, input/output rail-to-rail operational amplifiers Features Operating range from V CC = 2.7 V to 6 V Rail-to-rail input and output Extended V icm (V DD -.2 V to V CC +.2 V) Low supply
More informationTSM104W/A QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS
TSM14W/A QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 375µA/op. (@ V CC = 5V) LOW INPUT BIAS CURRENT : 2nA MEDIUM SPEED :.9MHz LOW INPUT OFFSET
More informationTS522. Precision low noise dual operational amplifier. Features. Description
Precision low noise dual operational amplifier Datasheet production data Features Large output voltage swing: +14.3 V/-14.6 V Low input offset voltage 850 μv max. Low voltage noise: 4.5 nv/ Hz High gain
More informationTEB1033 TEF1033-TEC1033
TEB1033 TEF1033-TEC1033 PRECISION DUAL OPERATIONAL AMPLIFIERS VERY LOW INPUT OFFSET VOLTAGE : 1mV max. LOW DISTORTION RATIO LOW NOISE VERY LOW SUPPLY CURRENT LOW INPUT OFFSET CURRENT LARGE COMMON-MODE
More informationLM158,A-LM258,A LM358,A
,A-LM258,A LM358,A LOW POWER DUAL OPERATIONAL AMPLIFIERS INTERNALLY FREQUENCY COMPENSATED LARGE DC VOLTAGE GAIN: 1dB WIDE BANDWIDTH (unity gain): 1.1MHz (temperature compensated) VERY LOW SUPPLY CURRENT/OP
More informationObsolete Product(s) - Obsolete Product(s)
OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 375µA/op. (@ V CC = 5V) LOW INPUT BIAS CURRENT : 2nA MEDIUM SPEED :.9MHz LOW INPUT OFFSET VOLTAGE :.5mV typ for TSM14A WIDE POWER SUPPLY RANGE : ±1.5V to ±15V
More informationObsolete Product(s) - Obsolete Product(s)
Low power quad operational amplifier Features Wide gain bandwidth: 1.3 MHz Extended temperature range: -40 C to +150 C Input common-mode voltage range includes negative rail Large voltage gain: 100 db
More informationTS3704. Micropower quad CMOS voltage comparators. Features. Description
Micropower quad CMOS voltage comparators Features Push-pull CMOS output (no external pull-up resistor required) Extremely low supply current: 9μa typ per comparator Wide single supply range 2.7V to 6V
More informationMC Low noise quad operational amplifier. Features. Description
MC3379 Low noise quad operational amplifier Features Low voltage noise: 4.5 nv/ Hz High gain bandwidth product: 15 MHz High slew rate: 7 V/µs Low distortion:.2% Large output voltage swing: +14.3 V/-14.6
More informationLM101A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS
LM1A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS LM1A LM201A LM301A INPUT OFFSET VOLTAGE 0.7mV 2mV INPUT BIAS CURRENT 25nA 70nA INPUT OFFSET CURRENT 1.5nA 2nA SLEW RATE AS INVERSINGV/µs V/µs AMPLIFIER
More informationOrder code Temperature range Package Packaging Marking
Micropower quad CMOS voltage comparator Datasheet production data Features Extremely low supply current: 9 μa typ./comp. Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V) Extremely
More informationLF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationLF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER INTERNALLY ADJUSTABLE INPUT OFFSET VOLTAGE LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW
More informationFeatures. Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking
Micropower quad CMOS voltage comparator Features Datasheet - production data D SO14 (plastic micropackage) P TSSOP14 (thin shrink small outline package) Pin connections top view Extremely low supply current:
More informationLF253 LF353. Wide bandwidth dual JFET operational amplifiers. Features. Description
Wide bandwidth dual JFET operational amplifiers Features Low power consumption Wide common-mode (up to V CC + ) and differential voltage range Low input bias and offset current Output short-circuit protection
More informationLF253, LF353. Wide bandwidth dual JFET operational amplifiers. Features. Description
Wide bandwidth dual JFET operational amplifiers Features Low power consumption Wide common-mode (up to + ) and differential voltage range Low input bias and offset current Output short-circuit protection
More informationTSM103/A DUAL OPERATIONAL AMPLIFIER AND VOLTAGE REFERENCE
TSM13/A DUAL OPERATIONAL AMPLIFIER AND VOLTAGE REFERENCE OPERATIONAL AMPLIFIER LOW INPUT OFFSET VOLTAGE :.5 typ.for TSM13A LOW SUPPLY CURRENT : 35µA/op. (@ V CC = 5V) MEDIUM BANDWIDTH (unity gain) :.9MHz
More informationTS27M2, TS27M2A, TS27M2B
Low-power CMOS dual operational amplifiers Features Wide supply voltage range: 3 to 6 V Ultra-low consumption: 50 µa/op typ Output voltage swing to ground Excellent phase margin on capacitive load Gain
More informationTL082 TL082A - TL082B
TL082 TL082A - TL082B GENERAL PURPOSE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION
More informationUA748 PRECISION SINGLE OPERATIONAL AMPLIFIER
PRECISION SINGLE OPERATIONAL AMPLIFIER INPUT OFFSET VOLTAGE : 3mV max. OVER TEMPERATURE FREQUENCY COMPENSATION WITH A SINGLE 30pF CAPACITOR (C1) OPERATION FROM ±5V to ±15V LOW POWER CONSUMPTION : 50mW
More informationLM2903W. Low-power, dual-voltage comparator. Features. Description
Low-power, dual-voltage comparator Datasheet production data Features Wide, single supply voltage range or dual supplies +2 V to +36 V or ±1 V to ±18 V Very low supply current (0.4 ma) independent of supply
More informationTS881. Rail-to-rail 0.9 V nanopower comparator. Description. Features. Applications
Rail-to-rail 0.9 V nanopower comparator Description Datasheet - production data SC70-5 (top view) SOT23-5 (top view) The TS881 device is a single comparator featuring ultra low supply current (210 na typical
More informationLM2902. Low power quad operational amplifier. Features. Description
Low power quad operational amplifier Features Wide gain bandwidth: 1.3MHz Input common-mode voltage range includes negative rail Large voltage gain: 100dB Very low supply current per amp: 375µA Low input
More informationTS982. Wide bandwidth dual bipolar operational amplifier. Features. Applications. Description
Wide bandwidth dual bipolar operational amplifier Features Operating from V CC = 2.5 V to 5.5 V 0 ma output current on each amplifier High dissipation package Rail-to-rail input and output Unity gain stable
More informationTS391. Low-power single voltage comparator. Features. Description
Low-power single voltage comparator Datasheet production data Features Wide single supply voltage range or dual supplies +2 V to +36 V or ±1 V to ±18 V Very low supply current (0.2 ma) independent of supply
More informationTS924 RAIL TO RAIL HIGH OUTPUT CURRENT QUAD OPERATIONAL AMPLIFIER
RAIL TO RAIL HIGH OUTPUT CURRENT QUAD OPERATIONAL AMPLIFIER RAIL TO RAIL INPUT AND OUTPUT LOW NOISE : 9nV/ (Hz) LOW DISTORTION HIGH OUTPUT CURRENT : 80mA (able to drive 32Ω loads) HIGH SPEED : 4MHz, 1.3V/µs
More informationMC MC35171 LOW POWER SINGLE BIPOLAR OPERATIONAL AMPLIFIERS
MC337 - MC357 LOW POWER SINGLE BIPOLAR OPERATIONAL AMPLIFIERS GOO CONSUMPTION/SPEE RATIO : ONLY 200µA FOR 2.MHz, 2µs SINGLE (OR UAL) SUPPLY OPERATION FROM +4 TO +44 (±2 TO ±22) WIE INPUT COMMON MOE MOE
More informationLM2901. Low power quad voltage comparator. Features. Description
Low power quad voltage comparator Features Wide single supply voltage range or dual supplies for all devices: +2 V to +36 V or ±1 V to ±18 V Very low supply current (1.1 ma) independent of supply voltage
More informationUA741 GENERAL PURPOSE SINGLE OPERATIONAL AMPLIFIER
GENERAL PURPOSE SINGLE OPERATIONAL AMPLIFIER LARGE INPUT VOLTAGE RANGE NO LATCH-UP HIGH GAIN SHORT-CIRCUIT PROTECTION NO FREQUENCY COMPENSATION REQUIRED SAME PIN CONFIGURATION AS THE UA709 N DIP8 (Plastic
More informationLM193, A LM293, A - LM393, A
, A LM293, A - LM393, A Low Power Dual Voltage Comparators Wide single supply voltage rangr dual supplies : +2V to +36V or ±V to ±8V Very low supply current (.4mA) independent of supply voltage (mw/ comparator
More informationTS27L4C,I,M PRECISION VERY LOW POWER CMOS QUAD OPERATIONAL AMPLIFIER VERY LOW POWER CONSUMPTION :
TS274C,I,M PRECISION ERY OW POWER CMOS QUAD OPERATIONA AMPIFIER ERY OW POWER CONSUMPTION : µa/op OUTPUT OTAGE CAN SWING TO GROUND EXCEENT PHASE MARGIN ON CAPACITIE OADS STABE AND OW OFFSET OTAGE THREE
More informationTL061 TL061A - TL061B
TL61 TL61A - TL61B LOW POWER J-FET SINGLE OPERATIONAL AMPLIFIERS VERY LOW POWER CONSUMPTION : µa WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGES LOW INPUT BIAS AND OFFSET CURRENTS OUTPUT
More informationLM248, LM348. Four UA741 quad bipolar operational amplifiers. Description. Features
Four UA741 quad bipolar operational amplifiers Description Datasheet - production data Features D SO14 Pin connections (top view) Low supply current: 0.53 ma per amplifier Class AB output stage: no crossover
More informationOPERATIONAL AMPLIFIERS
VOLTAGE AND CURRENT CONTROLLER OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 200µA/amp. MEDIUM SPEED : 2.1MHz LOW LEVEL OUTPUT VOLTAGE CLOSE TO V - CC : 0.1V typ. INPUT COMMON MODE VOLTAGE RANGE INCLUDES
More informationTL081 TL081A - TL081B
TL081 TL081A - TL081B GENERAL PURPOSE J-FET SINGLE OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION
More informationLM139, LM239, LM339. Low-power quad voltage comparators. Features. Description
, LM239, LM339 Low-power quad voltage comparators Features Wide single supply voltage range or dual supplies for all devices: +2 to +36 V or ±1 V to ±18 V Very low supply current (1.1 ma) independent of
More informationTS27M4C, TS27M4I, TS27M4M
Precision low power CMOS quad operational amplifiers Features Low power consumption: 50 µa/op Output voltage can swing to ground Excellent phase margin on capacitive loads Unity gain stable Two input offset
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. -LM258-LM358 A-LM258A-LM358A Low power dual operational amplifiers Features
More informationTSH110-TSH111-TSH112-TSH113-TSH114
Wide band low noise operational amplifiers Features Low noise: 3nV/ Hz Low supply current: 3.2mA 47mA output current Bandwidth: 100MHz 5V to 12V supply voltage Slew rate: 450V/μs Specified for 100Ω load
More informationTL062 TL062A - TL062B
TL62 TL62A TL62B LOW POWER JFET DUAL OPERATIONAL AMPLIFIERS VERY LOW POWER CONSUMPTION : µa WIDE COMMONMODE (UP TO + ) AND DIFFERENTIAL VOLTAGE RANGES LOW INPUT BIAS AND OFFSET CURRENTS OUTPUT SHORTCIRCUIT
More informationTL074 TL074A - TL074B
A B LOW NOISE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORTCIRCUIT PROTECTION
More informationTS mW Stereo Headphone Amplifier. Description. Applications. Order Codes
mw Stereo Headphone Amplifier Operating from to 5.5V mw into 6Ω at 5V 3mW into 6Ω at 3.3V.5mW into 6Ω at 2V Switch ON/OFF click reduction circuitry High power supply rejection ratio: 5dB at 5V High signal-to-noise
More informationTDA7231A 1.6W AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LOW QUIESCENT CURRENT HIGH POWER CAPABILITY LOW CROSSOVER DISTORTION SOFT CLIPPING
1.6 AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LO QUIESCENT CURRENT. HIGH POER CAPABILITY LO CROSSOVER DISTORTION SOFT CLIPPING DESCRIPTION The is a monolithic integrated circuit in 4 + 4 lead minidip
More informationTSH300 Ultra Low-Noise High-Speed Operational Amplifier Pin Connections (top view) + - Description Applications Order Codes OUT
TSH3 Ultra Low-Noise High-Speed Operational Amplifier Structure: VFA 2 MHz bandwidth Input noise:.6 nv/ Hz Stable for gains > Slew rate: 23 V/µs Specified on 1Ω load Tested on V power supply Single or
More informationMC4558 WIDE BANDWIDTH DUAL BIPOLAR OPERATIONAL AMPLIFIERS. INTERNALLY COMPENSATED SHORT CIRCUIT PROTECTION GAIN AND PHASE MATCH BETWEEN
MC4558 WIDE BANDWIDTH DUAL BIPOLAR OPERATIONAL AMPLIFIERS. INTERNALLY COMPENSATED SHORT CIRCUIT PROTECTION GAIN AND PHASE MATCH BETWEEN. AMPLIFIERS LOW POWER CONSUMPTION. PIN TO PIN COMPATIBLE WITH MC1458/LM358
More informationLM224A, LM324A. Low-power quad operational amplifiers. Features. Description
Low-power quad operational amplifiers Features Datasheet - production data D SO14 (plastic micropackage) Wide gain bandwidth: 1.3 MHz Input common mode voltage range includes ground Large voltage gain:
More informationLM193 LM293 - LM393 LOW POWER DUAL VOLTAGE COMPARATORS
LM293 - LM393 LOW POWER DUAL VOLTAGE COMPARATORS WIDE SINGLE SUPPLY VOLTAGE RANGE OR DUAL SUPPLIES : +2V TO +36V OR ±V TO ±8V VERY LOW SUPPLY CURRENT (.4mA) INDEPENDENT OF SUPPLY VOLTAGE (mw/comparator
More informationTS507. High precision rail-to-rail operational amplifier. Applications. Description. Features. Pin connections (top view)
TS57 High precision rail-to-rail operational amplifier Datasheet - production data SOT23-5 N.C. 1 8 N.C. Inverting Input 2 _ 7 VCC Non Inverting Input 3 + 6 Output VDD 4 5 N.C. SO-8 Features Pin connections
More informationTSV611, TSV611A, TSV612, TSV612A
TSV611, TSV611A, TSV612, TSV612A Rail-to-rail input/output 10 µa, 120 khz CMOS operational amplifiers Applications Datasheet - production data Out1 1 In1-2 In1+ 3 TSV611ILT - TSV611ICT In+ 1 5 V CC+ +
More informationTS331, TS332, TS334. Micropower low-voltage, rail-to-rail comparators. Applications. Description. Features. TS331 (single)
Micropower low-voltage, rail-to-rail comparators Datasheet - production data SOT23-5/SC70-5 TS331 (single) DFN6 1.2x1.3 Applications Mobile phones Notebooks and PDAs Battery-supplied electronics General-purpose
More informationTL084 TL084A - TL084B
A B GENERAL PURPOSE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT PROTECTION HIGH INPUT IMPEDANCE
More informationTL062. Low power JFET dual operational amplifiers. Features. Description + -
Low power JFET dual operational amplifiers Features Very low power consumption : 0µA Wide common-mode (up to V + CC ) and differential voltage ranges Low input bias and offset currents Output short-circuit
More informationLM2903H. Low-power dual voltage comparator. Features. Description
LM23H Low-power dual voltage comparator Datasheet production data Features Wide single supply voltage range or dual supplies +2 V to +36 V or ±1 V to ±18 V Very low supply current (0.4 ma) independent
More informationTL064 TL064A - TL064B
TL6 TL6A TL6B LOW POWER JFET QUAD OPERATIONAL AMPLIFIERS VERY LOW POWER CONSUMPTION : µa WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGES LOW INPUT BIAS AND OFFSET CURRENTS OUTPUT SHORTCIRCUIT
More informationTSC1021. High-side current sense amplifier. Features. Description. Applications
High-side current sense amplifier Features Wide common-mode operating range independent of supply: 2.8 to 30 V Wide common-mode surviving range: -32 to 60 V (reversed battery and load-dump conditions)
More informationTSH24 HIGH PERFORMANCE QUAD BIPOLAR OPERATIONAL AMPLIFIER
HIGH PERFORMANCE QUAD BIPOLAR OPERATIONAL AMPLIFIER HIGH GAIN BANDWIDTH PRODUCT : 25MHz HIGH SLEW RATE : V/µs SINGLE OR DUAL SUPPLY OPERATION : 3V TO 3V (±1.5V to ±V) LOW VOLTAGE NOISE : 14nV/ Hz NO PHASE
More informationTS461 TS462 TS464 OUTPUT RAIL TO RAIL OPERATIONAL AMPLIFIERS
TS461 TS462 TS464 OUTPUT RI TO RI OPRTION MPIFIRS HIGH YNMI FTURS PIN ONNTIONS (top view) RG OUTPUT SWING (±2.4V @ V = ±2.5V) OW NOIS V : 4nV/ Hz TS461T OW ISTORTION : 0.003% OPRTING RNG : 2.7V to 10V
More informationRT2904WH. RobuST low-power dual operational amplifier. Applications. Features. Description
RobuST low-power dual operational amplifier Datasheet - production data Features D SO8 (plastic micropackage) Pin connections (top view) Frequency compensation implemented internally Large DC voltage gain:
More informationTS834 MICROPOWER VOLTAGE SUPERVISOR RESET ACTIVE LOW OR HIGH INTEGRATED TIMER
MICROPOWER VOLTAGE SUPERVISOR RESET ACTIVE LOW OR HIGH INTEGRATED TIMER ULTRA LOW POWER CONSUMPTION : 12µA max. @ V CC = 5V BOTH ACTIVE HIGH AND ACTIVE LOW OUTPUTS RESET TIMER WITH DISABLE FUNCTION PRECISION
More informationLM2904WH. Low-power dual operational amplifier. Description. Features
Low-power dual operational amplifier Datasheet - production data MiniSO8 Wafer form SO8 Features Frequency compensation implemented internally Large DC voltage gain: 100 db Wide bandwidth (unity gain:
More informationLM193, LM193A, LM293, LM293A, LM393, LM393A
, A, LM293, LM293A, LM393, LM393A Low Power Dual oltage Comparators Wide single-supply voltage range or dual supplies: +2 to +36 or ± to ±8 ery low supply current (.4mA) independent of supply voltage (mw/comparator
More information. 2 SEPARATE STANDBY : REDUCED. . HIGH SPEED : 150MHz - 110V/µs UNITY GAIN STABILITY LOW OFFSET VOLTAGE : 3mV . HIGH VIDEO PERFORMANCES :
HIGH SPEED LOW POWER QUAD OPERATIONAL AMPLIFIER (WITH STANDBY POSITION). 2 SEPARATE STANDBY : REDUCED CONSUMPTION AND HIGH IMPEDANCE OUTPUTS LOW SUPPLY CURRENT : 4.5mA/amp. typ.. HIGH SPEED : 150MHz -
More informationTL084 TL084A - TL084B
TL84 TL84A TL84B GENERAL PURPOSEJFET QUAD OPERATIONAL AMPLIFIERS. WIDE COMMONMODE (UP TO VCC + ) AND DIFFERENTIAL VOLTAGE RANGE. LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT PROTECTION HIGH INPUT
More information. WIDE COMMON-MODE (UP TO VCC + ) AND
TL72 TL72A TL72B LOW NOISE JFET DUAL OPERATIONAL AMPLIFIERS. WIDE COMMONMODE (UP TO VCC + ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT. LOW NOISE e n = nv/ Hz (typ) OUTPUT SHORTCIRCUIT
More informationObsolete Product(s) - Obsolete Product(s)
RAIL TO RAIL CMOS DUAL OPERATIONAL AMPLIFIER (WITH STANDBY POSITION) RAIL TO RAIL INPUT AND OUTPUT VOLT AGE RANGES STANDBY POSITION : REDUCED CON SUMPTION (0.5µA) AND HIGH IMPEDANCE OUTPUTS SINGLE (OR
More informationTL081 TL081A - TL081B
TL8 TL8A - TL8B GENERAL PURPOSE J-FET SINGLE OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION HIGH
More informationTS HIGH THERMAL STABILITY MICROPOWER SHUNT VOLTAGE REFERENCE
HIGH THERMAL STABILITY MICROPOWER SHUNT VOLTAGE REFERENCE LOW Tc: ppm/ C MAXIMUM.V OUTPUT VOLTAGE LOW OPERATING CURRENT: 6µA max @ C HIGH PRECISION AT C: ±.% AND ±% STABLE WHEN USED WITH CAPACITIVE LOADS
More informationTSV6390, TSV6390A, TSV6391, TSV6391A
Micropower (60 µa), wide bandwidth (2.4 MHz) CMOS op-amps Features Low offset voltage: 500 µv max (A version) Low power consumption: 60 µa typ at 5 V Low supply voltage: 1.5 V 5.5 V Gain bandwidth product:
More informationTS374 LOW POWER QUAD CMOS VOLTAGE COMPARATOR
LOW POWER QUA CMOS VOLTAGE COMPARATOR WIE SINGLE SUPPLY RANGE OR UAL SUPPLIES 3V TO 6V OR ±.5V TO ±8V VERY LOW SUPPLY CURRENT:.mA/COMP INEPENENT OF SUPPLY VOLTAGE EXTREMELY LOW INPUT BIAS CURRENT : pa
More informationTEB1033 TEF1033-TEC1033
TEB TEF-TEC PRECISION DUAL OPERATIONAL AMPLIFIERS. ERY LOW INPUT OFFSET OLTAGE : 1m max. LOW DISTORTION RATIO LOW NOISE ERY LOW SUPPLY CURRENT LOW INPUT OFFSET CURRENT LARGE COMMON-MODE RANGE HIGH OUTPUT
More informationMC33001/A/B MC34001/A/B MC35001/A/B GENERAL PURPOSE SINGLE JFET OPERATIONAL AMPLIFIERS.
MC33/A/B MC3/A/B MC3/A/B GENERAL PURPOSE SINGLE JFET OPERATIONAL AMPLIFIERS. LOW POWER CONSUMPTION WIDE COMMONMODE (UP TO VCC + ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT. OUTPUT
More informationTSV911-TSV912-TSV914. Rail-to-rail input/output 8MHz operational amplifiers. Features. Applications. Description. Pin connections (top view)
TSV9TSV92TSV94 Railtorail input/output 8MHz operational amplifiers Features Railtorail input and output Wide bandwidth Low power consumption:.ma max. Unity gain stability High output current: 35mA Operating
More informationObsolete Product(s) - Obsolete Product(s)
WIDE BANDWIDTH AND BIPOLAR INPUTS SINGLE OPERATIONAL AMPLIFIER LOW DISTORTION GAIN BANDWIDTH PRODUCT : 150MHz UNITY GAIN STABLE SLEW RATE : 190V/µs VERY FAST SETTLING TIME : 20ns (0.1%) DESCRIPTION The
More informationTL081 TL081A - TL081B
TL8 TL8A - TL8B GENERAL PURPOSE J-FET SINGLE OPERATIONAL AMPLIFIER. WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT. OUTPUT SHORT-CIRCUIT PROTECTION HIGH
More information. WIDE COMMON-MODE (UP TO VCC + ) AND
A B LOW NOISE JFET QUAD OPERATIONAL AMPLIFIERS. WIDE COMMONMODE (UP TO VCC + ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT. LOW NOISE e n = nv/ Hz (typ) OUTPUT SHORTCIRCUIT PROTECTION
More informationMC33078 LOW NOISE DUAL OPERATIONAL AMPLIFIER
LOW NOISE DUAL OPERATIONAL AMPLIFIER LOW VOLTAGE NOISE: 4.5nV/ Hz HIGH GAIN BANDWIDTH PRODUCT: 15MHz HIGH SLEW RATE: 7V/µs LOW DISTORTION:.2% LARGE OUTPUT VOLTAGE SWING: +14.3V/-14.6V LOW INPUT OFFSET
More informationTL071 TL071A - TL071B
TL7 TL7A TL7B LOW NOISE JFET SINGLE OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 5nV/ Hz (typ) OUTPUT SHORTCIRCUIT
More information. WIDE COMMON-MODE (UP TO VCC + ) AND
TL7 TL7A TL7B LOW NOISE JFET SINGLE OPERATIONAL AMPLIFIERS. WIDE COMMONMODE (UP TO VCC + ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT. LOW NOISE e n = nv/ Hz (typ) OUTPUT SHORTCIRCUIT
More informationTL064. Low power JFET quad operational amplifier. Features. Description
Low power JFET quad operational amplifier Features Very low power consumption: 0 µa Wide commonmode (up to V + CC ) and differential voltage ranges Low input bias and offset currents Output shortcircuit
More informationPart Number Temperature Range Package Packaging VRef (%) Marking TSM1014ID
Low Consumption Voltage and Current Controller for Battery Chargers and Adaptors Constant voltage and constant current control Low consumption Low voltage operation Low external component count Current
More informationNE556 SA556 - SE556 GENERAL PURPOSE DUAL BIPOLAR TIMERS
NE556 SA556 - SE556 GENERAL PURPOSE DUAL BIPOLAR TIMERS LOW TURN OFF TIME MAXIMUM OPERATING FREQUENCY GREATER THAN 500kHz TIMING FROM MICROSECONDS TO HOURS OPERATES IN BOTH ASTABLE AND MONOSTABLE MODES
More informationTS271C,I,M CMOS PROGRAMMABLE LOW POWER SINGLE OPERATIONAL AMPLIFIER
TS7C,I,M CMOS PROGRAMMABE OW POWER SINGE OPERATIONA AMPIFIER OFFSET NU CAPABIITY (by external compensation) DYNAMIC CHARACTERISTICS ADJUSTABE I SET CONSUMPTION CURRENT AND DYNAMIC PARAMETERS ARE STABE
More informationTSL channel buffers for TFT-LCD panels. Features. Application. Description
14 + 1 channel buffers for TFT-LCD panels Datasheet production data Features Wide supply voltage: 5.5 V to 16.8 V Low operating current: 6 ma typical at 25 C Gain bandwidth product: 1 MHz High current
More informationL2720/2/4 LOW DROP DUAL POWER OPERATIONAL AMPLIFIERS
L2720/2/4 LOW DROP DUAL POWER OPERATIONAL AMPLIFIERS OUTPUT CURRENT TO 1 A OPERATES AT LOW VOLTAGES SINGLE OR SPLIT SUPPLY LARGE COMMON-MODE AND DIFFEREN- TIAL MODE RANGE LOW INPUT OFFSET VOLTAGE GROUND
More information74VHC20 DUAL 4-INPUT NAND GATE
DUAL 4-INPUT NAND GATE HIGH SPEED: t PD = 3.3 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON
More informationObsolete Product(s) - Obsolete Product(s)
TRIPLE 3-INPUT NOR GATE HIGH SPEED: t PD = 4.1 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON
More informationLM2904AH. Low-power, dual operational amplifier. Related products. Description. Features. See LM2904WH for enhanced ESD performances
LM2904AH Low-power, dual operational amplifier Datasheet - production data Related products See LM2904WH for enhanced ESD performances Features Frequency compensation implemented internally Large DC voltage
More informationLM2904, LM2904A. Low-power dual operational amplifier. Features. Description
, A Low-power dual operational amplifier Features Internally frequency-compensated Large DC voltage gain: 100 db Wide bandwidth (unity gain): 1.1 MHz (temperature compensated) Very low supply current/amplifier,
More informationTS3022. Rail-to-rail 1.8 V high-speed dual comparator. Applications. Description. Features
TS22 Rail-to-rail 1.8 V high-speed dual comparator Datasheet - production data Applications Telecom Instrumentation Signal conditioning High-speed sampling systems Portable communication systems Automotive
More information