TSM106. Dual Operational Amplifier and Voltage Reference. Operational Amplifier: Voltage Reference: PIN CONNECTIONS (top view) DESCRIPTION ORDER CODES
|
|
|
- Nickolas Cummings
- 5 years ago
- Views:
Transcription
1 Dual Operational Amplifier and Voltage Reference Operational Amplifier: Low input offset voltage: 1 typ. Medium bandwidth (unity gain): 0.9MHz Large output voltage swing: 0V to (V CC - 1.5V) Input common mode voltage range includes ground Wide power supply range: 4 to 32V ±2 TO ±16V 1.5kV ESD protection (HBM) Voltage Reference: Fixed output voltage reference 0.83V ±1% Voltage precision DESCRIPTION The is a monolithic IC that includes one independent op-amp and another op-amp for which the non-inverting input is wired to a 0.83V fixed voltage reference. This device offers both space and cost savings in many applications such as power supply management or data acquisition systems. D SO-8 (Plastic Micropackage) PIN CONNECTIONS (top view) Out1 Ve- Ve- Vref V - + Vcc Out2 Gnd Ve ORDER CODES Part Number Temperature Range Package Packaging Marking ID SO Tube -40 C, +105 C M106 IDT SO Tape & Reel October 2004 Revision 1 1/6
2 Absolute Maximum Ratings 1 Absolute Maximum Ratings Table 1: Key parameters and their absolute maximum ratings Symbol Parameter Value Unit V CC Supply Voltage 36 V V id Differential Input Voltage 36 V V i Input Voltage -0.3 to Vcc + 0.3V V T oper Operating Free-air Temperature Range -40 to +105 C T j Maximum Junction Temperature 150 C R thja Thermal Resistance Junction to Ambient (SO package) 175 C/W T l Maximum Lead Temperature (10 seconds maximum) 260 C ESD Electrostatic Discharge Protection 1.5 kv 2 Electrical Characteristics Table 2: General electrical characteristics I CC Total Supply Current Vcc+ = 5V, no load Tmin. < Tamb < Tmax. Vcc+ = 30V, no load Tmin. < Tamb < Tmax ma Table 3: Electrical characteristics for operator 2 (independant op-amp): VCC+ = +5V, VCC = Ground, Vo = 1.4V,Tamb = 25 C (unless otherwise specified) V io Input Offset Voltage V icm = 0V T amb = 25 1 DV io Input Offset Voltage Drift 7 µv/ C I io I ib Avd SVR Vicm CMR I source I o Input Offset Current 2 Input Bias Current T min. T amb T max 200 na Large Signal Voltage Gain V CC = 15V, R L = 2k, Vo = 1.4V to 11.4V V/ Supply Voltage Rejection Ratio V CC = 5V to 30V db Input Common Mode Voltage Range V CC = +30V - see note 1 0 (V CC +) (V + CC ) -2 V Common Mode Rejection Ratio db Output Current Source V CC = +15V, Vo = 2V, V id = +1V ma Short Circuit to Ground V CC = +15V ma na 2/6
3 Electrical Characteristics Table 3: Electrical characteristics for operator 2 (independant op-amp): VCC+ = +5V, VCC = Ground, Vo = 1.4V,Tamb = 25 C (unless otherwise specified) I sink V OH V OL SR GBP THD e n Output Current Sink V id = -1V, V CC = +15V, V o = 2V ma High Level Output Voltage T min. T amb T max T amb = 25 C, R L = 10k Low Level Output Voltage R L = 10k Slew Rate at Unity Gain V i = 0.5 to 3V, V CC = 15V R L = 2k, C L = 100pF, unity gain Gain Bandwidth Product V CC = 30V,R L = 2k, C L = 100pF f = 100kHz, V in = Total Harmonic Distortion f = 1kHz A V = 20dB,R L = 2k, V CC = 30V C L = 100pF, V o = 2V pp 0.02 Equivalent Input Noise Voltage f = 1kHz, Rs = 100Ω Vcc = 30V V V/µs MHz % 50 nv/ Hz 1) The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V. The upper end of the common-mode voltage range is V CC V. Both inputs can go to Vcc+ 0.3V without damage. Table 4: Electrical characteristics for operator 1 (op-amp with non-inverting input connected to the internal Vref): VCC+ = +5V, VCC- = Ground, Tamb = 25 C (unless otherwise specified) Input Offset Voltage V io V icm = 0.83V Vcc = 5V or 30V T amb = DV io Input Offset Voltage Drift 7 µv/ C I ib Input Bias Current negative input 20 na SVR Supply Voltage Rejection Ratio V icm = 0.83V + V CC = 5V to 30V db Output Current Source I source V o = 2V V CC = +15V, V id = +1V ma I o Short Circuit to Ground V CC = +15V ma Output Current Sink I sink V id = -1V, V CC = +15V, V o = 2V ma 3/6
4 Electrical Characteristics Table 4: Electrical characteristics for operator 1 (op-amp with non-inverting input connected to the internal Vref): VCC+ = +5V, VCC- = Ground, Tamb = 25 C (unless otherwise specified) V OH V OL THD High Level Output Voltage V + CC = 30V T amb = 25 C, R L = 10k Low Level Output Voltage R L = 10k Total Harmonic Distortion f = 1kHz A V = 20dB,R L = 2k, V CC = 30V C L = 100pF, V o = 2V pp 0.02 V % Table 5: Electrical characteristics for voltage reference V ref Regline Regload V ref Reference Input Voltage T amb = 25 C V V Reference Input Voltage over Vcc range Vicm = 3.7V to 30V T amb = 25 C 3 Reference Input Voltage over Ioutref current Ioutref = 1mA to 10mA T amb = 25 C 10 Reference Input Voltage Deviation Over Temperature Range /6
5 Package Mechanical Data 3 Package Mechanical Data SO-8 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A A A B C D E e H h L k 8 (max.) ddd /C 5/6
6 Revision History 4 Revision History Date Revision Description of Changes July First Release September Modifications on first page: Vio = 1 Curves will be added in the future Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners 2004 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Repubic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America 6/6
7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: ID IDT
TSM100 SINGLE OPERATIONAL AMPLIFIER AND SINGLE COMPARATOR
OPERATIONAL AMPLIFIER LOW INPUT OFFSET VOLTAGE : 0.5 typ. MEDIUM BANDWIDTH (unity gain) : 0.9MHz LARGE OUTPUT VOLTAGE SWING : 0V to (V CC - 1.5V) INPUT COMMON MODE VOLTAGE RANGE INCLUDES GROUND WIDE POWER
TSM103/A DUAL OPERATIONAL AMPLIFIER AND VOLTAGE REFERENCE
TSM13/A DUAL OPERATIONAL AMPLIFIER AND VOLTAGE REFERENCE OPERATIONAL AMPLIFIER LOW INPUT OFFSET VOLTAGE :.5 typ.for TSM13A LOW SUPPLY CURRENT : 35µA/op. (@ V CC = 5V) MEDIUM BANDWIDTH (unity gain) :.9MHz
TSM104W/A QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS
TSM14W/A QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 375µA/op. (@ V CC = 5V) LOW INPUT BIAS CURRENT : 2nA MEDIUM SPEED :.9MHz LOW INPUT OFFSET
Non-inverting input 1. Part Number Temperature Range Package Packing Marking. 4558C MC4558CPT TSSOP8 Tape & Reel MC4558IN
Wide Bandwidth Dual Bipolar Operational Amplifier Internally compensated Short-circuit protection Gain and phase match between amplifier Low power consumption Pin-to-pin compatible with MC1458/LM358 Gain
Obsolete Product(s) - Obsolete Product(s)
OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 375µA/op. (@ V CC = 5V) LOW INPUT BIAS CURRENT : 2nA MEDIUM SPEED :.9MHz LOW INPUT OFFSET VOLTAGE :.5mV typ for TSM14A WIDE POWER SUPPLY RANGE : ±1.5V to ±15V
TEB1033 TEF1033-TEC1033
TEB1033 TEF1033-TEC1033 PRECISION DUAL OPERATIONAL AMPLIFIERS VERY LOW INPUT OFFSET VOLTAGE : 1mV max. LOW DISTORTION RATIO LOW NOISE VERY LOW SUPPLY CURRENT LOW INPUT OFFSET CURRENT LARGE COMMON-MODE
LM101A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS
LM1A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS LM1A LM201A LM301A INPUT OFFSET VOLTAGE 0.7mV 2mV INPUT BIAS CURRENT 25nA 70nA INPUT OFFSET CURRENT 1.5nA 2nA SLEW RATE AS INVERSINGV/µs V/µs AMPLIFIER
Part Number Temperature Range Package Packing Marking. DIP14 Tube LM2902N LM2902D/DT SO-14 Tube or Tape & Reel
Low Power Quad Operational Amplifier Wide gain bandwidth: 1.3MHz Input common-mode voltage range includes ground Large voltage gain: 1dB Very low supply current per amp: 375µA Low input bias current: 2nA
OPERATIONAL AMPLIFIERS
VOLTAGE AND CURRENT CONTROLLER OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 200µA/amp. MEDIUM SPEED : 2.1MHz LOW LEVEL OUTPUT VOLTAGE CLOSE TO V - CC : 0.1V typ. INPUT COMMON MODE VOLTAGE RANGE INCLUDES
Obsolete Product(s) - Obsolete Product(s)
Low power quad operational amplifier Features Wide gain bandwidth: 1.3 MHz Extended temperature range: -40 C to +150 C Input common-mode voltage range includes negative rail Large voltage gain: 100 db
TS931ILT/AILT/BILT SOT23-5L Tape & Reel
Output Rail-to-Rail Micropower Operational Amplifiers n Rail-to-rail output voltage swing n Micropower consumption (µa) n Single supply operation (.7V to V n Low offset (mv max for TS93xB) n CMOS inputs
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
TSV321-TSV358-TSV324. General Purpose, Input/Output Rail-to-Rail Low Power Operational Amplifiers. Description. Applications
General Purpose, Input/Output Rail-to-Rail Low Power Operational Amplifiers Operating at V CC = 2.5V to 6V Rail-to-rail input & output Extended V icm (V DD -.2V to V CC +.2V) Capable of driving a 32Ω load
MC33172 MC Low power dual bipolar operational amplifiers. Features. Description
Low power dual bipolar operational amplifiers Features Good consumption/speed ratio: only 200 µa for 2.1MHz, 2V/µs Single (or dual) supply operation from +4 V to +44V (±2V to ±22V) Wide input common mode
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER INTERNALLY ADJUSTABLE INPUT OFFSET VOLTAGE LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW
LM158,A-LM258,A LM358,A
,A-LM258,A LM358,A LOW POWER DUAL OPERATIONAL AMPLIFIERS INTERNALLY FREQUENCY COMPENSATED LARGE DC VOLTAGE GAIN: 1dB WIDE BANDWIDTH (unity gain): 1.1MHz (temperature compensated) VERY LOW SUPPLY CURRENT/OP
Part Number Temperature Range Package Packaging VRef (%) Marking TSM1014ID
Low Consumption Voltage and Current Controller for Battery Chargers and Adaptors Constant voltage and constant current control Low consumption Low voltage operation Low external component count Current
TS522. Precision low noise dual operational amplifier. Features. Description
Precision low noise dual operational amplifier Datasheet production data Features Large output voltage swing: +14.3 V/-14.6 V Low input offset voltage 850 μv max. Low voltage noise: 4.5 nv/ Hz High gain
UA748 PRECISION SINGLE OPERATIONAL AMPLIFIER
PRECISION SINGLE OPERATIONAL AMPLIFIER INPUT OFFSET VOLTAGE : 3mV max. OVER TEMPERATURE FREQUENCY COMPENSATION WITH A SINGLE 30pF CAPACITOR (C1) OPERATION FROM ±5V to ±15V LOW POWER CONSUMPTION : 50mW
MC Low noise quad operational amplifier. Features. Description
MC3379 Low noise quad operational amplifier Features Low voltage noise: 4.5 nv/ Hz High gain bandwidth product: 15 MHz High slew rate: 7 V/µs Low distortion:.2% Large output voltage swing: +14.3 V/-14.6
LF253, LF353. Wide bandwidth dual JFET operational amplifiers. Features. Description
Wide bandwidth dual JFET operational amplifiers Features Low power consumption Wide common-mode (up to + ) and differential voltage range Low input bias and offset current Output short-circuit protection
UA741 GENERAL PURPOSE SINGLE OPERATIONAL AMPLIFIER
GENERAL PURPOSE SINGLE OPERATIONAL AMPLIFIER LARGE INPUT VOLTAGE RANGE NO LATCH-UP HIGH GAIN SHORT-CIRCUIT PROTECTION NO FREQUENCY COMPENSATION REQUIRED SAME PIN CONFIGURATION AS THE UA709 N DIP8 (Plastic
LF253 LF353. Wide bandwidth dual JFET operational amplifiers. Features. Description
Wide bandwidth dual JFET operational amplifiers Features Low power consumption Wide common-mode (up to V CC + ) and differential voltage range Low input bias and offset current Output short-circuit protection
TDA7231A 1.6W AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LOW QUIESCENT CURRENT HIGH POWER CAPABILITY LOW CROSSOVER DISTORTION SOFT CLIPPING
1.6 AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LO QUIESCENT CURRENT. HIGH POER CAPABILITY LO CROSSOVER DISTORTION SOFT CLIPPING DESCRIPTION The is a monolithic integrated circuit in 4 + 4 lead minidip
MC4558 WIDE BANDWIDTH DUAL BIPOLAR OPERATIONAL AMPLIFIERS. INTERNALLY COMPENSATED SHORT CIRCUIT PROTECTION GAIN AND PHASE MATCH BETWEEN
MC4558 WIDE BANDWIDTH DUAL BIPOLAR OPERATIONAL AMPLIFIERS. INTERNALLY COMPENSATED SHORT CIRCUIT PROTECTION GAIN AND PHASE MATCH BETWEEN. AMPLIFIERS LOW POWER CONSUMPTION. PIN TO PIN COMPATIBLE WITH MC1458/LM358
TS27L4. Very low power precision CMOS quad operational amplifiers. Features. Description
Very low power precision CMOS quad operational amplifiers Features Very low power consumption: µa/op Output voltage can swing to ground Excellent phase margin on capacitive loads Unity gain stable Two
TL081 TL081A - TL081B
TL081 TL081A - TL081B GENERAL PURPOSE J-FET SINGLE OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION
TL082 TL082A - TL082B
TL082 TL082A - TL082B GENERAL PURPOSE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION
LM248, LM348. Four UA741 quad bipolar operational amplifiers. Description. Features
Four UA741 quad bipolar operational amplifiers Description Datasheet - production data Features D SO14 Pin connections (top view) Low supply current: 0.53 ma per amplifier Class AB output stage: no crossover
RT2904WH. RobuST low-power dual operational amplifier. Applications. Features. Description
RobuST low-power dual operational amplifier Datasheet - production data Features D SO8 (plastic micropackage) Pin connections (top view) Frequency compensation implemented internally Large DC voltage gain:
Inverting Input 1. Non-inverting Input 1
Micropower Dual CMOS Voltage Comparators Extremely low supply current: 9µa typ/comp. Wide single supply range 2.7V to 6V or dual supplies (±.35V to ±8V) Extremely low input bias current: pa typ. Extremely
TL061 TL061A - TL061B
TL61 TL61A - TL61B LOW POWER J-FET SINGLE OPERATIONAL AMPLIFIERS VERY LOW POWER CONSUMPTION : µa WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGES LOW INPUT BIAS AND OFFSET CURRENTS OUTPUT
MC MC35171 LOW POWER SINGLE BIPOLAR OPERATIONAL AMPLIFIERS
MC337 - MC357 LOW POWER SINGLE BIPOLAR OPERATIONAL AMPLIFIERS GOO CONSUMPTION/SPEE RATIO : ONLY 200µA FOR 2.MHz, 2µs SINGLE (OR UAL) SUPPLY OPERATION FROM +4 TO +44 (±2 TO ±22) WIE INPUT COMMON MOE MOE
TSM1013. Constant Voltage and Constant Current Controller for Battery Chargers and Adaptors. Cc- Cc Out 7. Cc+ Gnd. 4 Cv- Cv Out 5 VOLTAGE REFERENCE
Constant Voltage and Constant Current Controller for Battery Chargers and Adaptors Constant voltage and constant current control Low voltage operation Low external component count Current sink output stage
TSM1011. Constant Voltage and Constant Current Controller for Battery Chargers and Adapters. PIN CONNECTIONS (top view) DESCRIPTION APPLICATIONS
Constant Voltage and Constant Current Controller for Battery Chargers and Adapters Constant voltage and constant current control Low voltage operation Low external component count Current sink output stage
LMV321-LMV358-LMV324. Low cost low power input/output rail-to-rail operational amplifiers. Features. Applications. Description LMV321ILT (SOT23-5)
Low cost low power input/output rail-to-rail operational amplifiers Features Operating range from V CC = 2.7V to 6V Rail-to-rail input and output Extended V icm (V DD -.2V to V CC +.2V) Low supply current
TL074 TL074A - TL074B
A B LOW NOISE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORTCIRCUIT PROTECTION
DIP14 Tube LM2901N LM2901D/LM2901DT SO-14 Tube or Tape & Reel
LM2901 Low Power Quad Voltage Comparator Wide single supply voltage range or dual supplies for all devices: +2V to +36V or ±1V to ±18V Very low supply current (1.1mA) independent of supply voltage (1.4mW/comparator
TSC1021. High-side current sense amplifier. Features. Description. Applications
High-side current sense amplifier Features Wide common-mode operating range independent of supply: 2.8 to 30 V Wide common-mode surviving range: -32 to 60 V (reversed battery and load-dump conditions)
LM2904AH. Low-power, dual operational amplifier. Related products. Description. Features. See LM2904WH for enhanced ESD performances
LM2904AH Low-power, dual operational amplifier Datasheet - production data Related products See LM2904WH for enhanced ESD performances Features Frequency compensation implemented internally Large DC voltage
TL062 TL062A - TL062B
TL62 TL62A TL62B LOW POWER JFET DUAL OPERATIONAL AMPLIFIERS VERY LOW POWER CONSUMPTION : µa WIDE COMMONMODE (UP TO + ) AND DIFFERENTIAL VOLTAGE RANGES LOW INPUT BIAS AND OFFSET CURRENTS OUTPUT SHORTCIRCUIT
Obsolete Product(s) - Obsolete Product(s)
WIDE BANDWIDTH AND BIPOLAR INPUTS SINGLE OPERATIONAL AMPLIFIER LOW DISTORTION GAIN BANDWIDTH PRODUCT : 150MHz UNITY GAIN STABLE SLEW RATE : 190V/µs VERY FAST SETTLING TIME : 20ns (0.1%) DESCRIPTION The
LMV321, LMV358, LMV324
Low cost, low power, input/output rail-to-rail operational amplifiers Features Operating range from V CC = 2.7 V to 6 V Rail-to-rail input and output Extended V icm (V DD -.2 V to V CC +.2 V) Low supply
TS982. Wide bandwidth dual bipolar operational amplifier. Features. Applications. Description
Wide bandwidth dual bipolar operational amplifier Features Operating from V CC = 2.5 V to 5.5 V 0 ma output current on each amplifier High dissipation package Rail-to-rail input and output Unity gain stable
MC33078 LOW NOISE DUAL OPERATIONAL AMPLIFIER
LOW NOISE DUAL OPERATIONAL AMPLIFIER LOW VOLTAGE NOISE: 4.5nV/ Hz HIGH GAIN BANDWIDTH PRODUCT: 15MHz HIGH SLEW RATE: 7V/µs LOW DISTORTION:.2% LARGE OUTPUT VOLTAGE SWING: +14.3V/-14.6V LOW INPUT OFFSET
TS mW Stereo Headphone Amplifier. Description. Applications. Order Codes
mw Stereo Headphone Amplifier Operating from to 5.5V mw into 6Ω at 5V 3mW into 6Ω at 3.3V.5mW into 6Ω at 2V Switch ON/OFF click reduction circuitry High power supply rejection ratio: 5dB at 5V High signal-to-noise
TEB1033 TEF1033-TEC1033
TEB TEF-TEC PRECISION DUAL OPERATIONAL AMPLIFIERS. ERY LOW INPUT OFFSET OLTAGE : 1m max. LOW DISTORTION RATIO LOW NOISE ERY LOW SUPPLY CURRENT LOW INPUT OFFSET CURRENT LARGE COMMON-MODE RANGE HIGH OUTPUT
LM193, A LM293, A - LM393, A
, A LM293, A - LM393, A Low Power Dual Voltage Comparators Wide single supply voltage rangr dual supplies : +2V to +36V or ±V to ±8V Very low supply current (.4mA) independent of supply voltage (mw/ comparator
TL064 TL064A - TL064B
TL6 TL6A TL6B LOW POWER JFET QUAD OPERATIONAL AMPLIFIERS VERY LOW POWER CONSUMPTION : µa WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGES LOW INPUT BIAS AND OFFSET CURRENTS OUTPUT SHORTCIRCUIT
1.8 V input/output, rail-to-rail, low power operational amplifiers. Reference. TS185x TS1851 TS1852 TS1854. TS185xA TS1851A TS1852A TS1854A
1.8 V input/output, rail-to-rail, low power operational amplifiers Features Operating range from V CC = 1.8 to 6 V Rail-to-rail input and output Extended V icm (V CC- -.2 V to V CC + +.2 V) Low supply
. WIDE COMMON-MODE (UP TO VCC + ) AND
TL72 TL72A TL72B LOW NOISE JFET DUAL OPERATIONAL AMPLIFIERS. WIDE COMMONMODE (UP TO VCC + ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT. LOW NOISE e n = nv/ Hz (typ) OUTPUT SHORTCIRCUIT
TL081 TL081A - TL081B
TL8 TL8A - TL8B GENERAL PURPOSE J-FET SINGLE OPERATIONAL AMPLIFIER. WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT. OUTPUT SHORT-CIRCUIT PROTECTION HIGH
TL081 TL081A - TL081B
TL8 TL8A - TL8B GENERAL PURPOSE J-FET SINGLE OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION HIGH
LM2902. Low power quad operational amplifier. Features. Description
Low power quad operational amplifier Features Wide gain bandwidth: 1.3MHz Input common-mode voltage range includes negative rail Large voltage gain: 100dB Very low supply current per amp: 375µA Low input
. WIDE COMMON-MODE (UP TO VCC + ) AND
TL7 TL7A TL7B LOW NOISE JFET SINGLE OPERATIONAL AMPLIFIERS. WIDE COMMONMODE (UP TO VCC + ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT. LOW NOISE e n = nv/ Hz (typ) OUTPUT SHORTCIRCUIT
. LOW LEVEL OUTPUT VOLTAGE CLOSE TO VCC - : 0.1V typ. INPUT COMMON MODE VOLTAGE RANGE INCLUDES GROUND
TSM102/A DUAL OPERATIONAL AMPLIFIER - DUAL COMPARATOR AND ADJUSTABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 200µA/amp MEDIUM SPEED : 21MHz LOW LEVEL OUTPUT VOLTAGE CLOSE TO VCC -
MC33001/A/B MC34001/A/B MC35001/A/B GENERAL PURPOSE SINGLE JFET OPERATIONAL AMPLIFIERS.
MC33/A/B MC3/A/B MC3/A/B GENERAL PURPOSE SINGLE JFET OPERATIONAL AMPLIFIERS. LOW POWER CONSUMPTION WIDE COMMONMODE (UP TO VCC + ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT. OUTPUT
OPERATIONAL AMPLIFIER & VOLTAGE REFERENCE KL103/A TECHNICAL DATA DESCRIPTION. PIN CONNECTIONS (top view) OPERATIONAL AMPLIFIER
TECHNICAL DATA OPERATIONAL AMPLIFIER & OLTAGE REFERENCE KL13/A OPERATIONAL AMPLIFIER LOW INPUT OFFSET OLTAGE :. typ. LOW SUPPLY CURRENT : 3 A/op. (@ cc = ) MEDIUM BANDWIDTH (unity gain) :.9MHz LARGE OUTPUT
LM2903W. Low-power, dual-voltage comparator. Features. Description
Low-power, dual-voltage comparator Datasheet production data Features Wide, single supply voltage range or dual supplies +2 V to +36 V or ±1 V to ±18 V Very low supply current (0.4 ma) independent of supply
TL071 TL071A - TL071B
TL7 TL7A TL7B LOW NOISE JFET SINGLE OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 5nV/ Hz (typ) OUTPUT SHORTCIRCUIT
. WIDE COMMON-MODE (UP TO VCC + ) AND
A B LOW NOISE JFET QUAD OPERATIONAL AMPLIFIERS. WIDE COMMONMODE (UP TO VCC + ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT. LOW NOISE e n = nv/ Hz (typ) OUTPUT SHORTCIRCUIT PROTECTION
TSH24 HIGH PERFORMANCE QUAD BIPOLAR OPERATIONAL AMPLIFIER
HIGH PERFORMANCE QUAD BIPOLAR OPERATIONAL AMPLIFIER HIGH GAIN BANDWIDTH PRODUCT : 25MHz HIGH SLEW RATE : V/µs SINGLE OR DUAL SUPPLY OPERATION : 3V TO 3V (±1.5V to ±V) LOW VOLTAGE NOISE : 14nV/ Hz NO PHASE
Order code Temperature range Package Packaging Marking
Micropower quad CMOS voltage comparator Datasheet production data Features Extremely low supply current: 9 μa typ./comp. Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V) Extremely
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. -LM258-LM358 A-LM258A-LM358A Low power dual operational amplifiers Features
TL062. Low power JFET dual operational amplifiers. Features. Description + -
Low power JFET dual operational amplifiers Features Very low power consumption : 0µA Wide common-mode (up to V + CC ) and differential voltage ranges Low input bias and offset currents Output short-circuit
. 2 SEPARATE STANDBY : REDUCED. . HIGH SPEED : 150MHz - 110V/µs UNITY GAIN STABILITY LOW OFFSET VOLTAGE : 3mV . HIGH VIDEO PERFORMANCES :
HIGH SPEED LOW POWER QUAD OPERATIONAL AMPLIFIER (WITH STANDBY POSITION). 2 SEPARATE STANDBY : REDUCED CONSUMPTION AND HIGH IMPEDANCE OUTPUTS LOW SUPPLY CURRENT : 4.5mA/amp. typ.. HIGH SPEED : 150MHz -
TL084 TL084A - TL084B
A B GENERAL PURPOSE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT PROTECTION HIGH INPUT IMPEDANCE
LM2903H. Low-power dual voltage comparator. Features. Description
LM23H Low-power dual voltage comparator Datasheet production data Features Wide single supply voltage range or dual supplies +2 V to +36 V or ±1 V to ±18 V Very low supply current (0.4 ma) independent
LM2904WH. Low-power dual operational amplifier. Description. Features
Low-power dual operational amplifier Datasheet - production data MiniSO8 Wafer form SO8 Features Frequency compensation implemented internally Large DC voltage gain: 100 db Wide bandwidth (unity gain:
TL084 TL084A - TL084B
TL84 TL84A TL84B GENERAL PURPOSEJFET QUAD OPERATIONAL AMPLIFIERS. WIDE COMMONMODE (UP TO VCC + ) AND DIFFERENTIAL VOLTAGE RANGE. LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT PROTECTION HIGH INPUT
LM224A, LM324A. Low-power quad operational amplifiers. Features. Description
Low-power quad operational amplifiers Features Datasheet - production data D SO14 (plastic micropackage) Wide gain bandwidth: 1.3 MHz Input common mode voltage range includes ground Large voltage gain:
TSH300 Ultra Low-Noise High-Speed Operational Amplifier Pin Connections (top view) + - Description Applications Order Codes OUT
TSH3 Ultra Low-Noise High-Speed Operational Amplifier Structure: VFA 2 MHz bandwidth Input noise:.6 nv/ Hz Stable for gains > Slew rate: 23 V/µs Specified on 1Ω load Tested on V power supply Single or
Features. Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking
Micropower quad CMOS voltage comparator Features Datasheet - production data D SO14 (plastic micropackage) P TSSOP14 (thin shrink small outline package) Pin connections top view Extremely low supply current:
TS391. Low-power single voltage comparator. Features. Description
Low-power single voltage comparator Datasheet production data Features Wide single supply voltage range or dual supplies +2 V to +36 V or ±1 V to ±18 V Very low supply current (0.2 ma) independent of supply
L2720/2/4 LOW DROP DUAL POWER OPERATIONAL AMPLIFIERS
L2720/2/4 LOW DROP DUAL POWER OPERATIONAL AMPLIFIERS OUTPUT CURRENT TO 1 A OPERATES AT LOW VOLTAGES SINGLE OR SPLIT SUPPLY LARGE COMMON-MODE AND DIFFEREN- TIAL MODE RANGE LOW INPUT OFFSET VOLTAGE GROUND
LM2901. Low power quad voltage comparator. Features. Description
Low power quad voltage comparator Features Wide single supply voltage range or dual supplies for all devices: +2 V to +36 V or ±1 V to ±18 V Very low supply current (1.1 ma) independent of supply voltage
TSH103. Low cost triple video buffer/filter for standard video. Features. Applications. Description
Low cost triple video buffer/filter for standard video Features Triple channels Internal 6 MHz reconstruction filter (4 th order) 6 db gain buffer for lines 5 V single supply Bottom of video signal close
LM139, LM239, LM339. Low-power quad voltage comparators. Features. Description
, LM239, LM339 Low-power quad voltage comparators Features Wide single supply voltage range or dual supplies for all devices: +2 to +36 V or ±1 V to ±18 V Very low supply current (1.1 ma) independent of
TS3704. Micropower quad CMOS voltage comparators. Features. Description
Micropower quad CMOS voltage comparators Features Push-pull CMOS output (no external pull-up resistor required) Extremely low supply current: 9μa typ per comparator Wide single supply range 2.7V to 6V
RT2902. RobuST low-power quad operational amplifier. Applications. Description. Features
RobuST low-power quad operational amplifier Datasheet - production data Features D SO14 (plastic micropackage) Pin connections (top view) Output 1 Non-inverting Input 1 3 Non-inverting Input 2 Inverting
TS27M2, TS27M2A, TS27M2B
Low-power CMOS dual operational amplifiers Features Wide supply voltage range: 3 to 6 V Ultra-low consumption: 50 µa/op typ Output voltage swing to ground Excellent phase margin on capacitive load Gain
TSH110-TSH111-TSH112-TSH113-TSH114
Wide band low noise operational amplifiers Features Low noise: 3nV/ Hz Low supply current: 3.2mA 47mA output current Bandwidth: 100MHz 5V to 12V supply voltage Slew rate: 450V/μs Specified for 100Ω load
TSC102. High-side current sense amplifier plus signal conditioning amplifier. Features. Applications. Description
High-side current sense amplifier plus signal conditioning amplifier Features Independent supply and input common-mode voltages Wide common-mode operating range: 2.8 to 3 V Wide common-mode surviving range:
TL061 TL061A - TL061B
TL TLA - TLB LOW POWER J-FET SINGLE OPERATIONAL AMPLIFIER. VERY LOW POWER CONSUMPTION : µa WIDE COMMON-MODE (UP TO + VCC ) AND DIFFERENTIAL VOLTAGE RANGES. LOW INPUT BIAS AND OFFSET CURRENTS OUTPUT SHORT-CIRCUIT
TSL channel buffers for TFT-LCD panels. Features. Application. Description
14 + 1 channel buffers for TFT-LCD panels Datasheet production data Features Wide supply voltage: 5.5 V to 16.8 V Low operating current: 6 ma typical at 25 C Gain bandwidth product: 1 MHz High current
LM193 LM293 - LM393 LOW POWER DUAL VOLTAGE COMPARATORS
LM293 - LM393 LOW POWER DUAL VOLTAGE COMPARATORS WIDE SINGLE SUPPLY VOLTAGE RANGE OR DUAL SUPPLIES : +2V TO +36V OR ±V TO ±8V VERY LOW SUPPLY CURRENT (.4mA) INDEPENDENT OF SUPPLY VOLTAGE (mw/comparator
Obsolete Product(s) - Obsolete Product(s)
2 W mono amplifier Features 2 W output power into 8 Ω at 12 V, THD = 10% Internally fixed gain of 32 db No feedback capacitor No boucherot cell Thermal protection AC short-circuit protection SVR capacitor
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER. INTERNALLY ADJUSTABLE INPUT OFFSET.
LF LF LF3 WIDE BANDWIDTH SINGLE JFET OPERATIONAL AMPLIFIER. INTERNALLY ADJUSTABLE INPUT OFFSET. VOLTAGE LOW POWER CONSUMPTION WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE. LOW INPUT BIAS
TS27L4C,I,M PRECISION VERY LOW POWER CMOS QUAD OPERATIONAL AMPLIFIER VERY LOW POWER CONSUMPTION :
TS274C,I,M PRECISION ERY OW POWER CMOS QUAD OPERATIONA AMPIFIER ERY OW POWER CONSUMPTION : µa/op OUTPUT OTAGE CAN SWING TO GROUND EXCEENT PHASE MARGIN ON CAPACITIE OADS STABE AND OW OFFSET OTAGE THREE
L165 3A POWER OPERATIONAL AMPLIFIER
3A POWER OPERATIONAL AMPLIFIER OUTPUT CURRENT UP TO 3A LARGE COMMON-MODE AND DIFFERENTIAL MODE RANGES SOA PROTECTION THERMAL PROTECTION ± 18V SUPPLY DESCRIPTION The L165 is a monolithic integrated circuit
TDA W MONO CLASS-D AMPLIFIER 18W OUTPUT POWER:
TDA481 18 MONO CLASS-D AMPLIFIER 18 OUTPUT POER: RL = 8Ω/4Ω; THD = 10% HIGH EFFICIENCY IDE SUPPLY VOLTAGE RANGE (UP TO ±25V) SPLIT SUPPLY OVERVOLTAGE PROTECTION ST-BY AND MUTE FEATURES SHORT CIRCUIT PROTECTION
TL064. Low power JFET quad operational amplifier. Features. Description
Low power JFET quad operational amplifier Features Very low power consumption: 0 µa Wide commonmode (up to V + CC ) and differential voltage ranges Low input bias and offset currents Output shortcircuit
TDA7241B 20W BRIDGE AMPLIFIER FOR CAR RADIO
TDA7241B 20W BRIDGE AMPLIFIER FOR CAR RADIO VERY LOW STAND-BY CURRENT GAIN = 32dB OUTPUT PROTECTED AGAINST SHORT CIRCUITS TO GROUND AND ACROSS LOAD COMPACT HEPTAWATT PACKAGE DUMP TRANSIENT THERMAL SHUTDOWN
TL082 TL082A - TL082B
TL82 TL82A TL82B GENERAL PURPOSE DUAL JFET OPERATIONAL AMPLIFIERS. LOW POWER CONSUMPTION WIDE COMMONMODE (UP TO VCC + ) AND DIFFERENTIAL VOLTAGE RANGE. LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT
Obsolete Product(s) - Obsolete Product(s)
TDA7263 12 +12W STEREO AMPLIFIER WITH MUTING WIDE SUPPLY VOLTAGE RANGE HIGH OUTPUT POWER 12+12W @ VS=28V, RL = 8Ω, THD=10% MUTE FACILITY (POP FREE) WITH LOW CONSUMPTION AC SHORT CIRCUIT PROTECTION THERMAL
L272 DUAL POWER OPERATIONAL AMPLIFIERS
L272 DUAL POWER OPERATIONAL AMPLIFIERS OUTPUT CURRENT TO 1 A OPERATES AT LOW VOLTAGES SINGLE OR SPLIT SUPPLY LARGE COMMON-MODE AND DIFFEREN- TIAL MODE RANGE. GROUND COMPATIBLE INPUTS LOW SATURATION VOLTAGE
LM193, LM193A, LM293, LM293A, LM393, LM393A
, A, LM293, LM293A, LM393, LM393A Low Power Dual oltage Comparators Wide single-supply voltage range or dual supplies: +2 to +36 or ± to ±8 ery low supply current (.4mA) independent of supply voltage (mw/comparator
TDA W AUDIO AMPLIFIER
TDA2006 12W AUDIO AMPLIFIER DESCRIPTION The TDA2006 is a monolithic integrated circuit in Pentawatt package, intended for use as a low frequency class "AB" amplifier. At ±12V, d = 10 % typically it provides
Obsolete Product(s) - Obsolete Product(s)
RAIL TO RAIL CMOS DUAL OPERATIONAL AMPLIFIER (WITH STANDBY POSITION) RAIL TO RAIL INPUT AND OUTPUT VOLT AGE RANGES STANDBY POSITION : REDUCED CON SUMPTION (0.5µA) AND HIGH IMPEDANCE OUTPUTS SINGLE (OR
TDA W MONO CLASS-D AMPLIFIER 1 FEATURES 2 DESCRIPTION. Figure 1. Package 25W OUTPUT POWER:
25 MONO CLASS-D AMPLIFIER 1 FEATURES 25 OUTPUT POER: RL = 8Ω/4Ω; THD = 10% HIGH EFFICIENCY IDE SUPPLY VOLTAGE RANGE (UP TO ±25V) SPLIT SUPPLY OVERVOLTAGEPROTECTION ST-BY AND MUTE FEATURES SHORT CIRCUIT