IRC 2015 Code Compliant Wood Framed Residential Details. Incorrect Installations of Connectors with code references and remedies, discussion.
|
|
- Blake Jenkins
- 5 years ago
- Views:
Transcription
1 IRC 2015 Code Compliant Wood Framed Residential Details Incorrect Installations of Connectors with code references and remedies, discussion.
2 You can help to avoid this, by being diligent with inspections.
3 Note to Attendees This presentation is intended to point out details referenced in IRC 2015 that pertain to wood framed structures relative to use of metal connectors. Some states and jurisdictions have adopted amendments to the IRC 2015 to provide local or state provisions that are unique to the state or local practices that may deviate from the wording in this presentation. MiTek Builder Products division encourages designers, builders, engineers and architects to contact the permitting agency for the local building code in effect for the selected construction site.
4
5 USP Structural Connectors is a product brand of MiTek USA, Inc. With roots beginning as TECO in 1933, the original connector company. With recognized names as Silver LumberLok, Kant Sag, Hughes, Semco. Acquired in 2011 by MiTek (a Berkshire Hathaway Subsidiary), the world s leading truss design software and hardware firm. Complete line of products for residential and commercial construction.
6 Watch this 90 second MiTek corporate video, Together We Rise
7 Learning Objectives Highlighting IRC code provisions pertaining to prescribed use of connectors and acceptable alternate methods. Examine table loads manufacturers use to identify capacities of various species of wood. Understand IRC Codes with regards to fasteners used in residential framing and reduced capacities for alternate fastener usage Viewing and evaluating photos of miss-installed connectors or incorrect application. Open discussion of remedies including contacting manufacturer for approval as installed or rejection.
8 Notes Regarding Code Versions This presentation has been created based on IRC Several slides, (the next 3) may be omitted in certain enforcement jurisdictions based on the version of the International Residential Code in effect or due to amendments that have modified local or state codes.
9 Not a tornado, just high winds south of Syracuse, NY in July of 2014
10 Fastener Changes Affect Connector Performance Catalog nail vs. Replacement Fastener
11 What if? Hanger calls for 8-16d nails and builder used 8-10dx1 ½
12 Handy Manufacturers optional nail table for use when it ain t quite right
13 R Foundation Anchorage Foundation anchorage is clearly defined for exterior walls and for interior walls on monolithic slabs for walls part of a BRACED WALL PANEL on page 89. The anchor bolts must be min. ½ diameter and extend min. 7 into concrete of grouted cells of CMU. The next slide will help determine the appropriate length of the anchor bolt.
14 What length anchor bolt? If the bolt has to be 7 into the concrete, the concrete has to be how thick at the outside edge? (8?) And if it has to go thru 1 ½ sill plate and have threads enough for a washer and nut, ½ + ½ for washer and nut= total minimum 9 Why are so many 6 anchor bolts are sold at the supply centers?
15 Hmmm Oops!
16 Additional Details on Page 89 Familiarize yourselves with the provisions for spacing 1. 6 min, 2 bolts per plate section 2. Must have one bolt not more than 12 from the end of each plate section. Please be aware that it is difficult to find load values assigned to the power of the anchor bolts.???
17 Is this good or bad? What is needed?
18 Typical J Bolt Installation This is not the only way to do it!
19 Exceptions are allowed that provide equivalent anchorage to ½ J bolts Typical FA3 Foundation Anchor Anchored to form boards
20 Other Style Alternates Wrap around plate Thru a hole drilled in plate
21 Is it Equivalent?? Manufacturers test products to assign values that engineers and designers rely upon.
22 Does this hold down look OK? Is it missing anchor bolts?
23 How about this one?
24 Is this acceptable?
25 Will this pass?
26 Pier and Curtain Wall Straps R on page 116 refers to the embedment, gauge of the strap and number and size of nails needed to install
27 Typical Floor Truss Layout
28 Floor Joist span table from mycarpentry.com Nominal Size Spacing (o.c.) Species and Grade of Lumber ( based on 40 lb / sq. ft. Live Load) Southern Yellow Pine Southern Yellow Pine Douglas Fir Eastern Spruce #1 grade (kiln dried) #2 grade #2 grade Structural " x 6" 2" x 8" 2" x 10" 2" x 12"
29 Refer to the IRC table on page 125 of IRC 2015 for floor joist spans Code book,irc 2015, page 125 identifies floor framing, allowable girder spans, amount of bearing on wood or metal (1 ½ ). R calls for full depth solid blocking for lateral restraint at supports. R identifies BRIDGING Cutting, notching and drilling of floor joists is clearly explained in R502.8
30 2015 R cutting/notching sawn lumber
31 Floors, R502.6 Bearing To paraphrase the section; The ends of each joist, beam or girder shall have at least 1- ½ of bearing on wood or metal, or by the use of approved joist hangers. There are code evaluated joist hangers for a wide range of applications and load bearing conditions and lumber and beam sizes.
32 Example of Seat Depth Note the seat depth D is seat depth
33 EWP manufacturers spells out what can be done. Is this acceptable?
34 Wood Floor Trusses are Covered in R Refer to pages in the IRC 2015 for specific matters related to floor trusses and the modification, alteration and required bracing. SBCA, and BCSI, Building Component Safety Information have free information related to bracing floor and roof trusses for safety.
35 Floor Trusses Along a Girder Beam
36 Good Floor Truss Example
37 Manufacturers Test for Fewer Nails This is a table from the USP Structural Connector s table for minimum/maximum load values with fewer nails.
38 Is this a good installation of a floor truss?
39 Hanger Styles Face mount hangers Top mount or top flange and specialty hangers.
40 Specialty Hangers Some used for skewed angle joists. Some for purlins or saddle joists.
41 Here is a good bridging example! Other styles accommodate individual framing needs.
42 Can you find any problems?
43 This is not a trick, any issues here?
44 Floor joist supported by a bolted header on a brick wall: Good or bad?
45 C mon Man!?
46 Chapter 5- Sect.507- Decks We are pleased to advise that there is a separate 1.0 hour presentation devoted entirely to decks, deck footings, stair spans, joist spans etc. We will be pleased to address future opportunities to share Safe Residential Deck design and Construction, Now on to Walls, Chapter 6.
47 Wood wall framing IRC 2015 R602 The walls are the intermediate component that carry the load path from roof structure to the floor and on to the foundation. The walls support the gravity loads of the roof and floors above as well as resist lateral forces imposed on the structure. The walls are wide areas (like sails) that will collect the effects of wind, whether it be straight line, tornadic or gusts of varying intensity.
48 Wood framed walls Cont d This entire chapter is classic how to do it correctly and prescriptively. A frequently overlooked detail is the defined fasteners for a variety of substrates attached to studs and the stud to plate and built up studs and creating double top plates. IRC2015 references nail diameters that are common to power driven, NOT a typical COMMON nail diameter.
49 Compliant fasteners for walls Built up studs-face nail 16 o.c. 10d 3 x.135 Built up header, 2 piece w/1/2 spacer 16d 12 o.c. 3 ½ x.135 Rafter or truss to plate toe nail 3-16d or 3-10d common nails, 2 on one side and one on opposite side Top or sole plate to stud end nail 3-16d 3 ½ x.135 or 2-16d common (.162) Sole plate to joist or blocking 2-16d 16 o.c. defined as 3 ½ x.162 or 3 ea. 3 1/2 x oc Plywood panels ½ or < use 6d 2 x o.c. edge and 12 o.c. field. Use 8d 2 ½ x.131 in roof plywood.
50 Footnotes are important Particularly, note on page 161 Point d 4x8 or 4x9 panels shall be applied vertically. Point f wind speed 130 mph or less, roof sheathing to gable end = 6 oc, 130> 6 oc for 48 in from gable end also Questions? Comments?
51 Walls with minimal sheathing can be braced by using factory engineered panels
52 Minimum Hold-Down force for alternate braced wall sections Per the table R on IRC2015 pg. 189 Single story for wind speeds <140 in SDC A,B,C one story, wall heights of 8,9,10 = 1,800# for wall heights 11, 2,000#, for 12 high walls, 2,200# For first of 2 stories same criteria, minimum is safe to say 3,600#. Examples are shown on next slide
53 How do we secure the braced wall panels to the foundation? One way is via Pre- Deflected Hold-downs Tension Ties are an accepted method and there are others.
54 R Metal Wall Bracing is OK Metal wall bracing is acceptable in lieu of Let-in-Bracing (LIB) A saw kerf is cut into studs and a T is driven in and nailed off Some strapping products do not require a kerf.
55 Will plumbers hanger strap suffice?
56 Is this good, bad or just poor workmanship?
57 Is this going to pass or fail?
58 How about this one?
59 What s right or wrong?
60 R Notching a Top Plate When a top plate is notched or cut to 50% or more of it s width, it must be reinforced with a GALVANIZED strap of 16 ga, 1 ½ wide and extend 6 on each side, fastened with at least 8-10d x 1 ½ nails each side of the notch. This is a change from previous codes which had called for 10 16d nails each side There is an exception for wood sheathed walls on the side of the notch. (rarely happens on that side) See the next slide.
61 Typical reinforced top plate The code does not require a double strap as is indicated here, a single Galv. Strap nailed per code is adequate.
62 Will this be allowed?
63 Major manufacturers have solutions for protecting pipe penetrations in top International code plate that is 5 x 16 galv. and bottom plates International code plate that is 5 x8 galv.
64 Discussion Questions This session contains provision for discussion. To better help the presenter and manufacturers bring pertinent information and solutions, we need to know what is going on in your world. Please take a few minutes and share with all, the issues you observe in daily inspections of wood framed structures. Incorrect or improper???
65 Roof-Ceiling Construction, Chapter 8 Manufacturers make a variety of rafter connections to accommodate framing styles preferences R802.2 refers to framing details apply to roofs with 3/12 minimum pitch or greater. R802.3 Where the pitch is less than 3/12, joist and rafter supports shall be designed as beams Collar ties or ridge straps to resist wind uplift must be connected in the upper 1/3 of the attic space.
66 Ceiling joist and rafter spans tables are included on pages Spans differ with lumber species. 2x6 ceiling joist 16 o.c. of #3 Hem fir is 13 9 whereas same size #2 SYP is 17 8 these are maximum spans used as an example. It is crucial to verify the grade of lumber in use, some suppliers accept a grade lower to attempt to have a price advantage at the expense of safety.
67 Rafter table comparison this example is from table R (4) This assumes a dead load of 10 psf. and 16 o.c. and a ground snow load of 30 psf. The tables have many varying conditions included for environmental conditions. 2x8 #3 Hem-Fir span is 11 5 max 2x8 #2 SYP rafter span is 14 2 maximum, this is a change from IRC2012 that was 16 2
68 Many framing practices drive the variety of connectors available. R both dwgs. Manufacturers address I-Joists for rafters too
69 Rafter/Truss to plate connection loads Note the different load capacities with various species of wood.
70 There is a wide variety of Rafter/Truss to Plate Connectors
71 R802.9 Framing of openings This section details the framed openings into an attic or area over ceiling joists. When the header joist is 6 of greater, approved hangers must be used for the header to trimmer joists.
72 Framed Opening Does this conform?
73 R Wood Trusses Have any of you witnessed or seen the aftermath of a truss roof collapse during construction? Bracing is required!!!!!! Per R , truss design drawings must include permanent truss member bracing locations. Drawings shall be provided to the building official and approved PRIOR to installation. R says trusses must be braced to prevent rotation, see the note related to SBCA.
74 Plans for safety Using steel straps More steel braces
75 SBCA Building Component Safety Information guide
76 Roof Tie Downs R Trusses must resist wind uplift. Toe nailing is acceptable in CERTAIN instances. Some jurisdictions require toe-nail inspection if used. Please see the table in chapter 6 R602.3.(1) Individual rafters must be attached to supporting wall assemblies to resist loads imposed by various wind speeds as shown in table R802.11
77 Uplift girder tie (double) on left, corner on right Girder Roof Ties
78 4 Ply on masonry Other Wall Types
79 Looks nice, is it good?
80 Skewed Connections
81 Is this a good rafter strap?
82 High Five to the person who can identify this malady!
83 Special devices for maintaining dimensional integrity This allows for trusses to move up and down with snow or other loads while keeping aligned O.C. on the NON BEARING plate.
84 They don t make a connector for that! Don t believe it! We hear about the local metal shop making connectors to hold weird beams and angles, welded right there near the site, based on the information given. It s about this long, about this high and spans about 13 feet. It will hold about X, are you comfortable with (about) engineering. Major manufacturers can solve most applications as long as an engineer can provide accurate dimensions and calculate the loads imposed on the joint.
85
86
87 Questions or Comments? Any particular area you would like to visit? Can you share brief examples of errors in framing and how you helped get it fixed? Thank you for taking the time to share and explore the code s requirements that can result in safer-stronger-survivable-structures.
IRC 2012 Code Compliant Wood Framed Residential details. Miss Installed Connectors with code references and remedies, discussion.
IRC 2012 Code Compliant Wood Framed Residential details Miss Installed Connectors with code references and remedies, discussion. You can help avoid this, by being diligent with inspections. Notes to Attendees
More information3.1 General Provisions
WOOD FRAME CONSTRUCTION MANUAL 107 3.1 General Provisions 3.1.1 Prescriptive Requirements The provisions of this Chapter establish a specific set of resistance requirements for buildings meeting the scope
More informationROOF-CEILING CONSTRUCTION
CHAPTER 8 ROOF-CEILING CONSTRUCTION SECTION R801 GENERAL R801.1 Application. The provisions of this chapter shall control the design and construction of the roof-ceiling system for all buildings. R801.2
More informationWood Roof Framing Common Design and Construction Defects Concurrent Session #5.3, Friday April 28, 2017, 9:45 AM-10:30 AM
Wood Roof Framing Common Design and Construction Defects Concurrent Session #5.3, Friday April 28, 2017, 9:45 AM-10:30 AM William J. Dery, PE Sr. Structural Engineer Outline 1. Wood Roof Framing 101 the
More informationT-BRACE / I-BRACE DETAIL WITH 2X BRACE ONLY
August 10, 2010 T-BRACE / I-BRACE DETAIL WITH 2X BRACE ONLY ST - T-BRACE 2 R MiTek Industries, Chesterfield, MO Page 1 of 1 Note: T-Bracing / I-Bracing to be used when continuous lateral bracing is impractical.
More information3. Are component and cladding design pressures consistent with ASCE 7 for the wind speed and exposure category (ASCE 7 Fig. 6-3)?
Mobile County Public Works Residential Plan Reviewers Checklist For Structural Requirements of Wood Framed Residences Recommendation: Permit as Noted Revise Plans and Resubmit MCPW Ref. No. Design Criteria:
More informationFastener Schedule. a, b, c. FASTENER Roof 3-8d (2 1 / ) / ) 3-10d. 3-10d ( ) 3-16d box nails. (3 1 2 toe nails on one side
ITEM 1 DESCRIPTION OF BUILDING ELEMENTS Blocking between joists or rafters to top plate, toe 2 Ceiling joists to plate, toe 3 4 5 6 Ceiling joists not attached to parallel rafter, laps over partitions,
More informationROOF-CEILING CONSTRUCTION
CHAPTER 8 ROOF-CEILING CONSTRUCTION SECTION R801 GENERAL R801.1 Application. The provisions of this chapter shall control the design and construction of the roof-ceiling system for all buildings (see Section
More informationWood Connections. Concepts of Well Designed Connections
Wood Connections Sam Hensen, P.E. Branch Engineering Manager Concepts of Well Designed Connections Must provide sufficient capacity to transfer loads to supporting members Utilize fastener spacing which
More informationSECTION R507 DECKS DECKING LEDGER BOARD BEAM. FOOTING BEAM SPAN CANTILEVER For SI: 1 inch = 25.4 mm FIGURE R507.2 DECK CONSTRUCTION
SECTION R507 DECKS R507.1 Application. The provisions of this section shall provide prescriptive requirements for the design and construction of all uncovered, wood-framed, single-span exterior decks.
More informationROOF-CEILING CONSTRUCTION
CHAPTER 8 ROOF-CEILING CONSTRUCTION SECTION R801 GENERAL R801.1 Application. The provisions of this chapter shall control the design and construction of the roof-ceiling system for all buildings. R801.2
More informationIntroducing AJSTM INSTALLATION GUIDE USA. 8 th Edition USA
The SIMPLE FRAMING SYSTEMSM INSTALLATION GUIDE USA for Floors This Installation Guide is intended to provide general information for the designer and end-user. For further information, please refer to
More informationROOF-CEILING CONSTRUCTION
CHAPTER 8 ROOF-CEILING CONSTRUCTION SECTION R801 GENERAL R801.1 Application. The provisions of this chapter shall control the design and construction of the roof-ceiling system for all buildings. R801.2
More informationFASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
More informationVERSA-LAM BCI INSTALLATION GUIDE LIMIT STATES DESIGN CANADA
INSTALLATION GUIDE VERSA-LAM BCI LIMIT STATES DESIGN CANADA The information in this document pertains use in the CANADA ONLY, Limit States Design. Refer the appropriate Specifier Guide US for use in the
More informationAPA Performance Rated Rim Boards
D a t a F i l e APA Performance Rated Rim Boards A Rim Board is the wood component that fills the space between the sill plate and bottom plate of a wall or, in second floor construction, between the top
More informationMAT105: Floor Framing
MAT105: Copyright 2007 American Forest & Paper Association, Inc. Because the common applications for wood framing are in residential construction, the details of this program will be based on the IRC which
More information24" max from each end of the ledger. See detail 6A & 6B, typ. both ends IRC R Ledger R507.2
NOTE: All exposed lumber to be pressure treated (P.T.) or decay resistant. Fasteners for P.T. wood shall be hot-dipped galv. or stainless steel, typical. see pages 2 & 5 for footings 8'-0" -10'-0" Beam
More information2x6. 2x8. 2x10. Size. 2-2x10 8'-5" w/ 2 NJ 7'-3" w/ 2 NJ
1 Rafter Size Spacing Allowable span 24" 11'-9" 24" 2x6 14'-1" 2x4 12" 15'-6" 12" 24" 14'-10" 24" 2x8 18'-2" 2x6 12" 20'-5" 12" 24" 18'-2" 24" 2x10 22'-3" 2x8 12" 25'-8" 12" 24" 21'-0" 24" 2x12 25'-9"
More informationAttachment of Residential Deck Ledger to Metal Plate Connected Wood Truss Floor Systems Overview Revised 9/2/2016
Attachment of Residential Deck Ledger to Metal Plate Connected Wood Truss Floor Systems Overview Revised 9/2/2016 SBCA has been the voice of the structural building components industry since 1983, providing
More informationAttachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder. Installation Instructions Revised 9/2/2016
Attachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder Installation Instructions Revised 9/2/2016 SBCA has been the voice of the structural building components industry
More informationTrusted ICC ES PASLODE, Evaluation. report, or as to any. ICC-ES Evaluation
0 ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg Most Widely Accepted and Trusted ESR 3072 Reissued 09/2018 Revised 10/2018 This report is subject to renewal 09/2020.
More informationSECTION: 15 ZONING RULE LOT AREA 6134 S.F S.F. BUILDING AREA (FOOTPRINT) LOT COVERAGE 20.2% 24.86' FRONT YARD SIDE YARD 8.
PROPOSED 1ST FLOOR PROPOSED 2ND FLOOR Anthony Hatziioannou Architect, P.C. EXISTING 1ST FLOOR ZONING CALCULATION JURISDICTION: TOWN OF OYSTER BAY SECTION: 15 BLOCK: 71 LOT: ZONE: RESIDENCE R1-7 PERMITTED
More informationTypical Deck Details
Botetourt County guard decking ledger board fasteners existing house floor construction guard post attachment ledger board attachment to existing house s footing beam -to-beam connection post-to-beam connection
More informationLP SolidStart LSL. LP SolidStart LSL Prescriptive Roof Framing Technical Guide 2500F b-1.75e, 2360F b -1.55E and 1730F b -1.
LP SolidStart LSL LP SolidStart LSL Prescriptive Roof Framing Technical Guide 2500F b-1.75e, 2360F b -1.55E and 1730F b -1.35E LSL Please verify availability with the LP SolidStart Engineered Wood Products
More informationExterior Wall Fastener Schedule
City of Republic Community Development Department Exterior Wall Fastener Schedule REVISION DATE: JANUARY 2017 Design and construction (2012 IRC Section R602.3): Exterior walls of wood frame construction
More informationGarage Design Guide. October 2018
Garage Design Guide October 2018 The Corporation of the Township of Hamilton 8235 Majestic Hills Drive, P.O. Box 1060, Cobourg Ontario K9A 4W5 Tel: 905-342-2810 Fax: 905-342-2818 Email: Tim Jeronimus (Chief
More informationSDWH TIMBER-HEX Screw
Simpson Strong-Tie Fastening Systems Structural Wood-to-Wood Connections, Including Ledgers Double-barrier coating provides corrosion resistance equivalent to hot-dip galvanization, making it suitable
More informationFeaturing TJ Rim Board and TimberStrand LSL
#TJ-8000 SPECIFIER S GUIDE TRUS JOIST RIM BOARD Featuring TJ Rim Board and TimberStrand LSL Multiple thicknesses, grades, and products to cover all your rim board needs 1¼" Thickness matches lateral load
More informationGLOSSARY OF TERMS SECTION 8
GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the
More informationLoad Tables, Technical Data and Installation Instructions
W22. W22. W22. W22. W22 W22.. Simpson Strong-Tie Fastening Systems Structural Wood-to-Wood Connections Including Ledgers Designed to provide an easy-to-install, high-strength alternative to through-bolting
More informationROOF-CEILING CONSTRUCTION
CHAPTER 8 ROOF-CEILING CONSTRUCTION SECTION R801 GENERAL R801.1 Application. The provisions of this chapter shall control the design and construction of the roof-ceiling system for all buildings. R801.2
More informationTypical Deck Details
Based on the 2009 Michigan Statewide Building Code guard decking ledger board fasteners existing house floor construction guard post attachment ledger board attachement to existing house s footing beam
More informationAPPLICATION FOR A BUILDING PERMIT
APPLICATION FOR A BUILDING PERMIT City of San Jacinto 595 S. San Jacinto Ave San Jacinto CA 92583 95.487.7330 fax 95.654.9896 Must print legibly, submit (3) sets of building and plot plans. Fill out all
More informationStructural Criteria for Residential Rooftop Solar Energy Installations
DOCUMENT #5 Structural Criteria for Residential Rooftop Solar Energy Installations STRUCTURAL CRITERIA FOR RESIDENTIAL FLUSH-MOUNTED SOLAR ARRAYS 1. ROOF CHECKS A. Visual Review/Contractor s Site Audit
More informationBeam & Header Technical Guide. LP SolidStart LVL. 2900F b -2.0E. U.S. Technical Guide U.S. TECHNICAL GUIDE
U.S. Technical Guide U.S. TECHNICAL GUIDE LP SolidStart LVL & Header Technical Guide 2900F b -2.0E Please verify availability with the LP SolidStart Engineered Wood Products distributor in your area prior
More informationLateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later
Lateral Support Decks over 24 above grade require lateral support* *Exceptions to be discussed later Decking Types of Decking: -2x4s & 2x6s -five quarter span rated decking boards -Wood plastic composite
More informationICC-ES Evaluation Report Reissued March 1, 2011 This report is subject to renewal in two years.
ICC-ES Evaluation Report www.icc-es.org (800) -6587 (56) 699-05 ESR-0 Reissued March, 0 This report is subject to renewal in two years. A Subsidiary of the International Code Council DIVISION: 06 00 00
More informationTHE ENGINEERED WOOD ASSOCIATION
D A T A F I L E APA Performance Rated Rim Boards A rim board is the wood component that fills the space between the sill plate and bottom plate of a wall or, in second floor construction, between the top
More informationStructural Criteria for Residential Flush-Mounted Solar Arrays
Structural Criteria for Residential Flush-Mounted Solar Arrays Planning and Development Building & Safety Division 1. ROOF CHECKS A. Visual Review/Contractor s Site Audit of Existing Conditions: 1) Is
More informationA. Rough carpentry includes but is not limited to the following:
SECTION 06100 ROUGH CARPENTRY PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification Sections,
More informationTOLL FREE:(888) FAX:(941) ASSEMBLY of ProTEC CONCRETE STRUCTURAL INSULATED PANEL
ASSEMBLY of ProTEC CONCRETE STRUCTURAL INSULATED PANEL The ProTEC panels are manufactured with grooves on all four sides to accept the steel components. This grooving applies to the regular panel whose
More informationStructural Criteria for Residential Rooftop Solar Energy Installations
TOOLKIT DOCUMENT #5 Structural Criteria for Residential Rooftop Solar Energy Installations CRITERIA FOR RESIDENTIAL FLUSH-MOUNTED SOLAR ARRAYS STRUCTURAL 1. ROOF CHECKS A. Visual Review/Contractor s Site
More informationTypical Deck Details Based on the City of Nixa Residential Deck Ordinance
Typical Deck Details Based on the City of Nixa Residential Deck Ordinance The use of this package in lieu of submitted drawings applies to Single Span, Single Level, Residential Decks ONLY. Decks must
More informationBuilding for High Wind Resistance in Light-Frame Wood Construction
Building for High Wind Resistance in Light-Frame Wood Construction DESIGN GUIDE Meeting the Challenge of High Wind Design Designing a structure to withstand the devastating forces of tornados is one of
More informationJOIST DETAILS Plate nail, 16d (0.15" x 1 ") at 1 on-center Blocking panel: 1 1 8" TJ Rim Board, 1 1 TimberStrand SL or TJI joist Toe nail, 10d (0.11" x ") at on-center A1 CS BEAM DETAILS L1 eb stiffener
More informationCity of Virginia Beach, Virginia Typical Deck Details
City of Virginia Beach, Virginia Typical Deck Details Based on the 2012 Virginia Residential Code The design details in this document apply to residential, single-level decks only. Construction cannot
More informationTYPICAL PATIO COVERS. OWNER: ADDRESS: PHONE:
City of Aliso Viejo Building Division 12 Journey, Suite 100 Aliso Viejo, CA 92656 (949)425-2540 Fax (949)425-3899 www.cityofalisoviejo.com TYPICAL PATIO COVERS 111 I. GENERAL Patio covers are one-story,
More informationWall bracing is one of the most important structural elements of
CONTINUINGEDUCATION Wall Bracing and the Codes Introduction Wall bracing is one of the most important structural elements of any house, but it can also be one of the most confusing, because designing houses
More informationPV System Structural Criteria
PV System Structural Criteria Town of Atherton Building Department 91 Ashfield Road Atherton, California 94027 Phone: (650) 752-0560 STRUCTURAL CRITERIA FOR RESIDENTIAL ROOFTOP FLUSH-MOUNTED SOLAR ARRAYS
More informationSections & Details VOCABULARY
1 Sections & Details VOCABULARY 1 ROOF FRAMING DETAIL RIDGE BOARD SHEATHING SHINGLES WEB FASCIA RAFTER (chord) SOFFIT SHEATHING STUD INSULATION DOUBLE TOP PLATE CEILING JOIST 2 FOUNDATION DETAIL STUD SHEATHING
More information10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS
10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS 10x12 WOOD SKID FLOOR FLOOR SYSTEM FOR 10x12 TRICO AND FLORA SHEDS RAW MATERIALS LIST: 2 (9) FLOOR FRAMING AND SHEATHING: 1) BAND BOARD 2 x 6 x 12 PRESSURE
More informationPrescriptive Residential Wood Deck Construction Guide Based on the 2006 International Residential Code
Prescriptive Residential Wood Deck Construction Guide Based on the 2006 International Residential Code Where applicable, provisions and details contained in this document are based on the International
More informationESR-2403 Reissued October 1, 2009 This report is subject to re-examination in one year.
ICC-ES Evaluation Report ESR-403 Reissued October, 009 This report is subject to re-examination in one year. www.icc-es.org (800) 43-6587 (56) 699-0543 A Subsidiary of the International Code Council DIVISION:
More informationMain Floor Revisions: 38' 0" Rm1 H3 50' 0" Bk1 B1 Rm2 B5 (26)-2 H2 B2 H3 (3)-3 B3 (11)-4 Bk1 B1 (5)-5 Rm4 Bk1 Rm3 Bk1 24' 0" 6' 0" 20' 0" START FRAMIN
Main Floor Revisions: 38' 0" Rm1 H3 50' 0" B1 Rm2 B5 (26)-2 H2 B2 H3 (3)-3 B3 (11)-4 B1 (5)-5 Rm4 Rm3 24' 0" 6' 0" 20' 0" START FRAMING HERE 18" BCI 90'S @ 16"OC Products PlotID Net Qty Product Length
More informationSite Installation Guide
Site Installation Guide Site Checklist Stop and read this now. Tick box when checked. Floor Joist Layout If a floor joist design/layout was done, was a site copy of the layout provided with the joists,
More informationDeck Evaluation Checklist
Date: Reported By: Project Name/Client: Year Deck was Built: I. Stairs A. Not Applicable B. Are there any visible signs of cracks, decay or over-notching? No Yes 1. If yes, where? C. Stairway width: (Hint:
More information4) Verify that the size of the supporting member can accommodate the connector s specified fasteners.
DESIGN NOTES 1) Allowable loads for more than one direction for a single connection cannot be added together. A design load which can be divided into components in the directions given must be evaluated
More informationUse the Design Properties (100% Load Duration) Table from Page 3 for questions 1-7
www.garyklinka.com page 1 of 16 Truss Joist I-Joist Quiz Instructions: www.garyklinka.com 1. Print these pages. 2. Print referencing manual from my site at http://garyklinka.com/manuals/tj-4000.pdf or
More informationICC-ES Evaluation Report
ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-2608 Reissued January 2016 This report is subject to renewal January 2017. A Subsidiary of the International Code Council DIVISION:
More informationDECKS. Stairway illumination Positive attachment of ledger Lateral load connection required board (R507.2) required (R ) (R311.7.
DECKS Max. riser height-7 ¾ Min. tread depth-10 Landings required at (R311.7.5.1) (R311.7.5.2) top and bottom of stairs (R311.7.6) Notched guardrail post NOT allowed Graspable handrail required Spacing
More informationMaryland Building Officials Association Typical Deck Details
Maryland Building Officials Association Typical Deck Details Based on the International Residential Code The design details in this document apply to residential decks only. Framing requirements are limited
More informationVertical Offset Base and Safety Rail System Installation Instructions
Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat
More informationWind-Resistant. Framing Techniques. Cost-effective details to help houses weather the storm
Wind-Resistant Framing Techniques Cost-effective details to help houses weather the storm 64 FINE HOMEBUILDING BY BrYan readling You ve seen photos and videos of massive tornadoes ripping through towns
More informationPulaski County, Virginia Typical Deck Details Based on the 2012 Virginia Residential Code
Pulaski County, Virginia Typical Deck Details Based on the 2012 Virginia Residential Code The design details in this document apply to residential, single-level decks only. Construction cannot deviate
More informationTCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II
SECTION 061000 - ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The General Conditions, any Supplementary General Conditions and Division 1, General Requirements, are hereby made a part of
More informationSECTION ROUGH CARPENTRY
SECTION 06100 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work of this Section shall include all materials and installation necessary to provide Rough Carpentry as shown and detailed on the Drawings and
More informationSECTION ROUGH CARPENTRY
SECTION 06 10 00- ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including Contracting Requirements and Division 1 Specification Sections, apply
More informationCollins Engineers Palmetto Islands County Park Boardwalk Repairs 03/28/2014 SECTION ROUGH CARPENTRY
PART 1 GENERAL 1.1 RELATED SECTIONS SECTION 061000 ROUGH CARPENTRY A. Drawings and general provisions of the Construction Contract, including General Conditions and Division 1 Specification Sections, apply
More informationWood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 1
Wood structures Copyright G G Schierle, 2001-02 press Esc to end, for next, for previous slide 1 Wood Types: Balloon framing (rare) Platform framing Heavy timber framing Advantages: The only renewable
More informationDesign Guide Pryda Connectors for Steel Framing
Pryda Connectors for Steel Framing Copyright: (c) Pryda Australia A Division of ITW Australia November 2012 November 2012 Design Guide Pryda Connectors for Steel Framing INDEX General Notes General information
More informationPryda Timber Connectors
Pryda Timber Connectors Pryda Lintel Guide Engineered Steel Wall Lintels March 2014 ESSENTIAL NOTES PRYDA PRODUCT GUIDES INTRODUCTION The information in this Product Guide is provided for use in Australia
More informationShearwall System Installation Guide
Shearwall System Installation Guide Complete HFX product listing with dimensions, weights, connectors, typical installations and accessories. Also includes Hardy Frame Moment Frame information. Easy as
More informationESR-2648 Reissued May 1, 2012 This report is subject to renewal June 1, 2013.
ICC-ES Evaluation Report ESR-2648 Reissued May 1, 2012 This report is subject to renewal June 1, 2013. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council DIVISION:
More informationSECTION ROUGH CARPENTRY 1.1 DESCRIPTION OF WORK:
SECTION 061000 - ROUGH CARPENTRY 1.1 DESCRIPTION OF WORK: A. Definition: Rough carpentry includes carpent~y work not specified as part of other sections and which is generally not exposed, except as otherwise
More informationTRUS JOIST RIM BOARD. Featuring TJ Rim Board and TimberStrand LSL. Multiple thicknesses, grades, and products to cover all your rim board needs
#TJ-8000 SPECIFIER S GUIDE TRUS JOIST RIM BOARD Featuring TJ Rim Board and Multiple thicknesses, grades, and products to cover all your rim board needs 1¼" Thickness matches lateral load capacity of 2x
More informationHOME STRENGTHENING GUIDE HOW TO ECONOMICALLY STRENGTHEN YOUR HOUSE AGAINST EARTHQUAKES AND HURRICANES
HOME STRENGTHENING GUIDE HOW TO ECONOMICALLY STRENGTHEN YOUR HOUSE AGAINST EARTHQUAKES AND HURRICANES Grenville W Phillips II BSc, BEng, MASc, MURP, CEng, FIStructE, FCIHT, MAPM, MCSCE, MBAPE Chartered
More informationSections & Details. WOOD SILL and FLOOR CONSTRUCTION NOTES
2 Sections & Details WOOD SILL and FLOOR CONSTRUCTION NOTES 1 Commonly Used Lumber Common LENGTHS include: 8, 10, 12, 14, 16 NOMINAL SIZES 2 x 4 2 x 6 2 x 8 2 x 10 2 x 12 ACTUAL SIZES 1 ½ x 3 ½ 1 ½ x 5
More informationEWP Product Guide. For Use With Products Manufactured by THF23140 LSSH179 SKH1720L
EWP Product Guide www.connectors.com For Use With Products Manufactured by THF23140 LSSH179 SKH1720L Lumberton Largo Montgomery Houston Rancho Cucamonga Livermore Thornhill, Ontario 1018-071 2 General
More information24 X32 3 CAR GARAGE POLE BARN STYLE FRAME
24 X32 3 CAR GARAGE POLE BARN STYLE FRAME 3 ENTRY DOOR 2 WINDOWS, 1 @ EA. END 1-16 X8 GARAGE DOOR 1-9 X8 GARAGE DOOR 4 CONCRETE SLAB 10 WALLS 4/12 PITCH METAL ROOF METAL SIDING INDEX PAGE DESCRIPTION 1
More informationTimber to Timber - Timber to Concrete - Timber to Steel
01/2017 TIMBER CONNECTORS NOT TO BE USED IN EXTERIOR SITUATIONS Stainless Steel alternatives are available where stated Timber to Timber - Timber to Concrete - Timber to Steel MiTek manufactures and markets
More informationCall (770) STEP 6: Caulk bolt hole within the bracket for protection from the elements.
Call (770) 777 7007 Structural Deck Support System: Product Numbers: H1-GQ, H2-GCL (Also applies to H1-GK and H2-GCR) STEP 1: Following the spacing guidelines per the deck design and joist layout, mark
More informationMaterials. Description Quantity/Size Material Foundation Drainage material. 1.4 cu. yd. Compactible gravel
This 8 12-ft. shed features a simple gable roof, double doors, and side and rear windows for natural lighting. With full-height walls and doors, there's ample room for storing large items or creating a
More informationE-Blueprints. Children s Backyard Playhouse 8 x sq. feet main 32 sq feet porch 2 x 4 Framed Walls 6' Ceiling Height
SDS-CAD - Specialized Design Systems E-BLUEPRINTS C ABINS G ARAGES Children s Backyard Playhouse 8 x 10 80 sq. feet main 32 sq feet porch 2 x 4 Framed Walls 6' Ceiling Height Plan sets contain the following:
More informationONE AND TWO FAMILY DWELLINGS Uncovered Decks July, 2007
ONE AND TWO FAMILY DWELLINGS Uncovered Decks July, 2007 In the City of Lee s Summit, the construction of uncovered decks with a floor surface more than 30 inches above the adjacent grade level requires
More informationDoor Canopy. PDL Building Products Industrial Parkway, N. Olmsted, OH Phone:
Door Canopy Door Canopies are attractive and efficient while eliminating the need and expense of drafting and manufacturing canopies as part of the building package. Construction: 26 gauge material around
More informationWood I-Joists by Curtis Eck, P.E.
Roof Framing with Wood I-Joists by Curtis Eck, P.E. I-joists make for a strong, flat roof, but you have to pay attention to the connections at the ridge and eaves W hile many builders have incorporated
More informationDesign Guidelines for Hurricane Resistant Buildings
Design Guidelines for Hurricane Resistant Buildings Date : October 20, 2017 INTRODUCTION These design guidelines were produced in the aftermath of Hurricane Hugo, which devastated the U.S. Virgin Islands
More informationDave's Glossary of Construction Terms. by Dave Osborne (www.daveosborne.com)
Dave's Glossary of Construction Terms by Dave Osborne (www.daveosborne.com) 5/4" A thickness of decking material between 1 x 6 and 2 x 6. Although it is called 5/4 x 6, it is actually 1" thick and 5 1/2"
More informationHOW TO BUILD A 12X8 SHED
HOW TO BUILD A 12X8 SHED With Illustrations, Drawings & Step By Step Details Note: This is a sample plan from RyanShedPlans. All other plans in our collection goes indepth with more details, more instructions,
More informationWith Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e H O W B U I L D S H E D.
With Illustrations, Drawings & Step By Step Details Click Here To Download 12,000 Shed Plans 1 P a g e H O W B U I L D S H E D. C O M Table of Contents OVERVIEW... 3 MATERIALS & CUTTING LISTS... 4 DRAWINGS,
More informationFor Use With Products Manufactured by
1 EWP PRODUCT GUIDE For Use With Products Manufactured by SKH34R- LSSH179 THF1795 THO17118 Westampton Largo Montgomery Humble Corona Livermore Thornhill, Ontario 945-131 GENERAL NOTES Follow these instructions
More informationPRESCRIPTIVE RESIDENTIAL DECK CONSTRUCTION GUIDE. Based on the 2015 International Residential Code
MULTI- JURISDICTIONAL BROCHURE PRESCRIPTIVE RESIDENTIAL DECK CONSTRUCTION GUIDE Based on the 2015 International Residential Code BP-68 guard decking ledger board fasteners existing house floor construction
More informationCity of Long Beach Department of Development Services Building and Safety Bureau. Wood Frame Prescriptive Provisions For Residential Construction
City of Long Beach Department of Development Services Building and Safety Bureau Wood Frame Prescriptive Provisions For Residential Construction Information Bulletin BU-010 Eff: 01-01-2011 Rev: 07-05-2017
More informationAttached/Detached Patio Cover
1 Attached/Detached Patio Cover NOTE: Check with your homeowners association and architectural review committee for Conditions, Covenants & Restrictions (CC&R s). The San Joaquin County has no regulatory
More informationMAT106: Wall Framing. AMERICAN FOREST & PAPER ASSOCIATION American Wood Council Engineered and Traditional Wood Products
MAT106: This portion of the program will address the code requirements for wall framing, although we won t address bracing in this section. The program contains a separate bracing section. 1 FASTEN PLATES
More informationBest Barns USA. the Brookhaven 10' x 16' Assembly Book. revised March 23, 2016
Best Barns USA Assembly Book revised March 23, 2016 the Brookhaven 10' x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
More informationCUTTING, NOTCHING, AND BORING OF WOOD FRAMING MEMBERS (Unless an alternate design is provided by a licensed Engineer or Architect)
INFORMATION BULLETIN / PUBLIC - BUILDING CODE REFERENCE NO.: 91.2320 Effective: 5-23-00 DOCUMENT NO. P/BC 2002-007 Revised: 2-01-01 Previously Issued As: IB ST-14 CUTTING, NOTCHING, AND BORING OF WOOD
More informationBest Barns. 10' x 12' the Elm R. Assembly Book. revised September 29, 2016
Best Barns Assembly Book revised September 29, 2016 the Elm R 10' x 12' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive - Greenville, PA 16125 This manual is copyrighted. Under the
More informationUnit 9. Wall and Ceiling Framing
Unit 9 Wall and Ceiling Framing Wall construction Wall framing includes the assembly of horizontal and vertical members that make up exterior walls and interior partitions. Theses walls support the ceilings
More information