Welcome to EONTEC
|
|
- Irene Elliott
- 5 years ago
- Views:
Transcription
1 Welcome to EONTEC
2 Our mission Our mission We make the best quality products with competitive price and on-time delivery in order to let our customers competitive as well. We provide quick response at a responsible attitude and target at long-term relationship with customers.
3 Company Profiles Established : 1984Y Factory Area : over 200,000 sq.meter Covered Area : over 70,000 sq.meter Number of employees : 1,800+ Stock Code: (Since June,2012) Map EON
4 Milestone Y2012 went public in mainland Y2011 Got ISO14001: 2004 Y2009 Got ISO/TS Y2008 Magnesium recycling center found. Y2007 Got ISO/TS Y Got ISO & QS9000. Y1997 Got ISO Y1984 E-ande SZ Company was founded.
5 Management & Engineering Team EON provides one-stop solutions in aluminum & magnesium die casting, from mold design to finish part. Raw material R&D team We have an excellent R&D team with more than 70 researchers in SongShan Lake High tech park,dongguan City. RD Team include Chinese Academy of Sciences, National Engineering Research Center for Magnesium Alloys, Chongqing University, HK die casting Association, HK productivity Council etc.
6 Technology and Innovation Biodegradation Mg-Physical Medical Mg Advantage: -No need 2 nd operation to take out Mg nail. -Mg nail is absorbed by human
7 Technology and Innovation Energy-saving locking system Hydraulic locking Advantage: -Saving energy with small size of DC machine -Saving cost
8 Technology and Innovation Rare earth Mg alloy Normal Mg Alloy Rare earth Mg Alloy Advantage: -Better strength -Better metal flow Microstructure of Mg Alloy
9 Technology and Innovation Liquid Metal Advantage: -Net sharp -High strength, High hardness -Precision part with complex structure 9
10 Project Management Time/Days PVT(15d) DVT(15d) EVT(7d) Tool(25d) DFM(3d) RFQ(3d) Remark: LT based on 14 inch of D cove. Stage
11 Our Key Customers Automotive CE Others
12 Products for Automotive
13 Products for CE-Ultra thin-wall DC Sports Camera Smart Phone E-Books/Tablet Note Book Al,Front Heatsink,T=0.4mm Mg,Mid Frame T=0.4mm Mg,Mid Frame T=0.5mm Mg,14 Keyboard,T=0.8mm Al,Bingin Thermal Ring,T=0.4mm Alu,Mid Frame T=0.4mm Mg,Mid Frame T=0.5mm Mg,15 Mid Frame,T=0.8mm
14 One-Stop Solution Service Mold Design Mold Fabrication Melting Die Casting Shot Blasting Deburings Trimming De-gate CNC Machining Cleaning Painting Leakage test Packing Remark: Product process will be subject to your product design.
15 Tooling Design By 3D mold-flow simulation
16 Tooling Facility Tooling Type of machines QTY Machine center 23 Wire-cut 13 E.D.M 16 CNC milling machine 11 Lathe 5 Drilling machine 4 Grinding machine 7 Saw machine 1 Sharper-knife machine 4 Sand-wheel machine 5 Total: 89 CNC machine Type of machines QTY Kitamura vertical CNC 5 16
17 Recycling system for Mg Alloy Scrap Material Recycling system Recycled Material 17
18 Die cast Facility-Big Size Die cast Facility-Both Mg and Alu Ton Quantity Chamber 1650T 1 Cold Chamber 2000T 1 Cold Chamber 2200T 1 Cold Chamber 2500T 1 Cold Chamber 2700T 1 Cold Chamber 4000T 1 Cold Chamber 6
19 Die cast Facility-Mg Die cast Facility-Mg Alloy Ton Quantity 800T 2 650T 4 630T 1 530T 1 400T T 1 315T 1 200T T 5 160T 11 Total 52
20 Die cast Facility-Alu Die cast Facility-AL Alloy Ton Quantity 800T 3 650T 1 630T 1 550T 1 500T 1 400T 7 350T 2 300T 3 280T 2 160T 2 140T 3 135T 1 125T 2 90T 1 Total 30
21 CNC Facility Machine type CNC Lathe Spec CJ625B Lathe machine LSEIKI NR 23,MAZAK CNC lathe machines Qty (sets) CNC Machining Center VX500 vertical CNC machine FANUC & BROTHER CNC milling machine TC-S2A Brother CNC machine Brother double rotary table CNC machines Total 300
22 Pretreatment Automatic-Precision Drill Machine Automatic chromate line Cleanliness Line Magnetic polishing Mirco-arc line Vacuum packing
23 Surface Treatment Painting & Coating We have the automatic spray process from painting, powder coating, industry coating, non-stick coating, etc. 10K Class Clean-room for Painting:1Line Clean-Room for Painting:4Lines Powder coating Line:4Lines Pad Printing Machine:10Sets Single Color Pad Printing machine:5sets Multi Color Pad Printing machine:5sets
24 Assembly Line 3C Assembly Line is working for sticking Gasket, conductive fiber, Display adhesive, form and so on. Fully Automatic Assembly Line Manual Assembly Line
25 Test Center 3D Scan Machine:ATOS III Triple Scan Quality Control Reverse Engineering Rapid Prototyping Rapid Milling Digital Mock-Up
26 Test Center Spectrometer X-ray Detection Machine RoHs Detector Cleanness inspection system Tensile Test Machine Projector
27 Test Center Hardness Detector High gauge CMM Inspection Roughness Checking Salt Spay Test Leakage Test
28 Certification ISO9001:2008 ISO/TS16949:2009 ISO
29 Team Building
30 Thanks for your attention! Contact information: Name:Eric Zeng C: P: Ext306
3ERP Presentation-2017
3ERP Presentation-2017 www.3erp.com The "3-E" Difference Excellence in Precision Efficiency in Production Economically Priced! CONTENT WHO IS 3ERP 1 3ERP TODAY 2 3ERP MISSION 3 CORE CAPABILITIES 4 CNC
More information3E RP Presentation-2018
3E RP Presentation-2018 www.3erp.com The "3-E" Difference Excellence in Precision Efficiency in Production Economically Priced CONTENT WHO IS 3ERP 3ERP TODAY 3ERP MISSION CORE CAPABILITIES CNC MACHINING
More informationCASTMAX (M) SDN. BHD. (Company) is a manufacturer of
CASTMAX (M) SDN. BHD. (Company) is a manufacturer of Aluminium alloy and Zinc alloy die-cast products. The Company was incorporated in Malaysia under the Company Act 1965 as Private Limited Companies.
More informationSun On Enterprises Group Ltd
Sun On Industrial Park No. 88, Hongying Gongyeyuan, Hongshi Bridge, Fenggang Town, Dong Guan City, 527300, Guangdong, P.R.China Our History: 1995, Mr. George Cheung established Sun On Plastic Moulding
More informationyour long-term reliable partner
Corporate Profile your long-term reliable partner 2018 Ozay Dokum www.ozaydokum.com 1 Key Figures - Integrated production facilities - 25 years of experience - 10.000 m 2 area - 120 employees - 45% export
More informationPacco Industrial Corporation
Pacco Industrial Corporation Engineering Division Profile Core Competencies Product Design And Development. Concept sketching. Manufacturing detailing. Development & Prototyping. Reverse Engineering. Value
More informationDM&E CORPORATION EQUIPMENT AND FACILITIES LISTING
DM&E CORPORATION EQUIPMENT AND FACILITIES LISTING DM&E Corporation PO Box 580 Shelby, NC 28151-0580 (704) 482-8876 Fax: (704) 484-8326 Email: sales@dmecutter.com Website: www.dmecutter.com Updated January
More informationAsian Manufacturing Solutions
Asian Manufacturing Solutions About AMS Benefits For Customer Manufacturing Technologies AMS Locations Services Next Steps Visit www.amsolutionforyou.com for more details. About AMS AMS brings over 30
More informationInternational Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications
1 2 International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications Joachim Gundlach, Jörg Detering Contents 3 Company Information
More informationWorld Class Fabrication and Machining Parts to Finished Assemblies
- Woman Owned Small Business - World Class Fabrication and Machining Parts to Finished Assemblies FABRICATION MACHINING POWDER COATING WET PAINTING PLATE PROCESSING WELDING FABRICATION MACHINING POWDER
More informationPrecision Quality Performance
Precision Quality Performance About Keats Keats Established in 1958, the Keats companies have been providing customers with the highest quality precision custom small metal stampings, wire forms, and assemblies
More informationET2C International. Low Cost Country Outsourcing/ Sub Contract Manufacture
ET2C International Low Cost Country Outsourcing/ Sub Contract Manufacture Who Are We For the past 18 years ET2C International have been supporting businesses globally benefit from the advantages of sourcing
More informationForrest MACHINE PRODUCTS CO. LTD. Any questions? FORREST MACHINE PRODUCTS CO. LTD When Precision Quality Counts
Forrest MACHINE PRODUCTS CO. LTD. Any questions? 139 S. Illinois Ave. Mansfield, OH 44905 P: 419-589-3774 / www.fmpcorp.com CO. LTD ABOUT US Manufacturing precision screw machine products for over 35 years.
More informationCOMPTAKE COMPANY PROFILE 2017
COMPTAKE COMPANY PROFILE 2017 HEATSINK SSD DESIGN WWW.COMPTAKE.COM WWW.COMPTAKE.COM ABOUT COMPTAKE HEADQUARTER (HQ) Established in 2004 by a group of experienced thermal experts Current capital : USD 1,000,000
More informationAATC PRESENTATION INVESTMENT CASTING PROCESS (2 OF 3 PRESENTATIONS REVISION 2014_0429) AATC, Inc W. Catalina Dr. Phoenix, AZ USA
AATC PRESENTATION INVESTMENT CASTING PROCESS (2 OF 3 PRESENTATIONS REVISION 2014_0429) 1 Wax Injection & Pattern Assembly Wax Injection: A wax pattern is made by injecting liquid wax into an aluminum mold.
More informationFrom Plate Materials & Services - To To COMPLETE PRESS FRAMES
From Plate Materials & Services - To To COMPLETE PRESS FRAMES Press Press Weldments Weldments & & Assemblies: Assemblies: Superior has Superior has specialized specialized in these in these unique Heavy
More informationAutomotive Industry Mechanical Engineering Hydraulics Locking Technology High-frequency Engineering Watch Industry Measurement and Test Equipment
Automotive Industry Mechanical Engineering Hydraulics Locking Technology High-frequency Engineering Watch Industry Measurement and Test Equipment Presentation Herbrig & Co GmbH precision FROM THE MUEGLITZ
More informationThink quality. Think global
Think quality. Think global B.B. Investment Casting Manufactures : Precision Lost Wax Investment Castings (Feinguss - Micro Fusione) VISION THE COMPANY, AT A GLANCE At B.B. Investment Casting, we commit
More informationIntroduction to Manufacturing Processes
Introduction to Manufacturing Processes Products and Manufacturing Product Creation Cycle Design Material Selection Process Selection Manufacture Inspection Feedback Typical product cost breakdown Manufacturing
More informationLoudon Industries, Inc. Facility List
Loudon Industries, Inc. Facility List 1 2 Thank you for your interest in Loudon Industries, Inc. We offer a diverse range of machining and engineering capabilities to satisfy our customers diverse requirements.
More informationTIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
More informationMold details: Mirror polish. Type: Plastic moulding Core surface finish: Production Material: PC Cavity surface finish: Mirro Polish
Welcome to shop for high quality plastic injection mold manufacturer with competitive price from our company - one of the leading manufacturers and suppliers in China. Top quality, high efficiency, wide
More informationBUMESH TECHNICS. Automotive.
BUMESH TECHNICS Automotive Company / BUMESH TECHNICS AUTOMOTIVE BUMESH TECHNICS has been founded as a supplier in Automotive Industry. Main Activities A) DIE DESIGN & MANUFACTURING ( Tandem ; Progressive
More informationASA Engineers Pvt. Ltd.
COMPANY PROFILE ASA Engineers Engineers Pvt. Pvt. Ltd. Ltd. Is Is Commercial Commercial Tool Tool room room Incorporated Incorporated In In 1995 1995 ASA An ISO ISO -9001-9001 :: 2008 2008 Certified Certified
More informationPIPE & TUBE FABRICATION SERVICES CUSTOM BENDING LASER CUTTING END FORMING UNRIVALED EXPERTISE.
PIPE & TUBE FABRICATION SERVICES CUSTOM BENDING LASER CUTTING END FORMING UNRIVALED EXPERTISE www.sharpeproducts.com INDUSTRIES SERVED AUTOMOTIVE MEDICAL FURNITURE & FIXTURES FOOD & BEVERAGE AEROSPACE
More informationProtokoll QMH Band 3 Supplier self information II - Range of Services- Title: L General Information about the company. KBA Supplier-no.
1. General Information about the company KBA Supplier-no. Company Postal address Delivery address Telephone Fax E-Mail Internet-Adresse: Supplier's code for KBA: 2. Technical questions 2.1 Which manufacturing
More informationCOMPANY PROFILE ABOUT US Ruizhun Precision Metal Co., Ltd. Focus on Semi solid die casting (magnesium alloy), Light alloy die casting, Precision injection molding, Mould manufacturing, CNC machining. As
More informationDie Life Checklist. Part Consideration. Critical to Function & Cosmetic. Cosmetic, No Function. Critical to Function. Not Critical but Functional
Tooling for Die Casting NADCA T-2-2-00 Guidelines Guidelines to increase die life are as follows: Before the start of tooling 1) Redesign of part to reduce or eliminate sharp internal corners or features
More informationCOMPANY PROFILE ABOUT US Dongguan City Ruizhun Precision Metal Co., Ltd Focus on Semi solid die casting (magnesium alloy), light alloy die casting, precision injection molding, mold manufacturing, CNC
More informationCasting Processes. ver. 2
Casting Processes ver. 2 1 Types of Parts Made Engine blocks Pipes Jewelry Fire hydrants 2 Complex, 3-D shapes Near net shape Low scrap Relatively quick process Intricate shapes Large hollow shapes No
More information1. T/T: 40% Deposit,30% upon T1 Sample,30% Balance before ship ment 2. L/C: irrevocable 100% L/C at sight. 1 Product Name Bicycle basket moulding
Our commitment to servicing our customers with quality product at competitive price and on-time delivery is backed by our continued investment in our equipment.our employees and in our systems. ABIS is
More information24-27 MAY 2017 PUTRA WORLD TRADE CENTRE. THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION KUALA LUMPUR, MALAYSIA
24-27 MAY 2017 PUTRA WORLD TRADE CENTRE KUALA LUMPUR, MALAYSIA THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION EXHIBITORS PROFILE MACHINE TOOLS Boring, Broaching, CNC
More informationTIPS FOR CHOOSING A PROTOTYPING MACHINE SHOP
CHOOSING the right prototyping machine shop for your next project is quite possibly the most important decision you will make in the entire process. This is particularly true for entrepreneurs with little
More informationA1, CNC Turning Centre with Slant Bed, CNC 1 A2, CNC Turning Centre, CNC 2 A3, CNC Turning Centre, CNC 4, CNC 5 A4, CNC Turning Centre, CNC 9
A1, CNC Turning Centre with Slant Bed, CNC 1 A2, CNC Turning Centre, CNC 2 A3, CNC Turning Centre, CNC 4, CNC 5 A4, CNC Turning Centre, CNC 9 A5, CNC Turning Centre, CNC 8 A6, CNC Turning Centre, CNC 10
More informationUpdated January 2019 METAL CUTTING EQUIPMENT BORING & DRILLING MACHINES GRINDING MACHINES HORIZONTAL LATHES. Page 1 of 7 MACHINE DESCRIPTION 3541.
METAL CUTTING EQUIPMENT BORING & DRILLING MACHINES JIG BORING 3541.205 BORING, HBM QUILL FEED SPINDLES CNC OR MANUAL 3541.207 DRILLING, NON-NC 3541.215 SENSITIVE VERTICAL DRILLING MACHINES, MANUAL 3541.216
More informationCopyright 2007 Sematco, Inc. All Rights Reserved 275 Eastpark Drive - Roanoke, VA 24019
Sematco employs a willing and talented workforce capable of identifying and solving difficult problems through ingenuity and work ethic. We produce quality parts in a cost efficient manner that consistently
More informationHarmony Castings, LLC TPi Arcade, INC
Harmony Castings, LLC TPi Arcade, INC Using the V-PROCESS V for Production and Prototype Casting Requirements What is the V-PROCESS V and how it works V-PROCESS produces castings with a smooth surface,
More informationFACILITY AND EQUIPMENT REPORT
Phone: (260) 758-3121 Fax: (260) 758-2521 FACILITY AND EQUIPMENT REPORT REGISTRATIONS ISO 9001:2008 / ISO 14001 REGISTERED FACILITY 18 acre Campus Markle Indiana 108,000 square feet of manufacturing space
More informationAgenda. Group Overview. 3 Further information. Focus on Sirone plant & our Core Business
Agenda 1 Group Overview 2 Focus on Sirone plant & our Core Business 3 Further information Who we were Our history The 1 st tool-shop Co.stamp was founded back in 1968. A small workshop with few employees,
More informationMANUFACTURER OF PRECISION MACHINED PARTS AND ASSEMBLIES.
MANUFACTURER OF PRECISION MACHINED PARTS AND ASSEMBLIES www.steuby.com John Steuby- Founder John J. Steuby Company, founded in 1962, is a family owned and operated manufacturing company, specializing
More informationMaterials & Processes in Manufacturing
Materials & Processes in Manufacturing ME 151 Chapter 15 Multiple Use Mold Casting Processes 1 Introduction Expendable Molds - melting point materials and castings General shortcomings of the expendable-mold
More informationStainless Steel CNC Machined Parts Turned Components :
STAINLESS STEEL CNC MACHINED PARTS TURNED COMPONENTS Stainless Steel CNC Machined Parts Turned Components : We create metal turned parts with virtually any material including aluminum, brass, cast iron,
More informationDIRECT METAL LASER SINTERING DESIGN GUIDE
DIRECT METAL LASER SINTERING DESIGN GUIDE www.nextlinemfg.com TABLE OF CONTENTS Introduction... 2 What is DMLS?... 2 What is Additive Manufacturing?... 2 Typical Component of a DMLS Machine... 2 Typical
More informationMetal Mould System 1. Introduction
Metal Mould System 1. Introduction Moulds for these purposes can be used many times and are usually made of metal, although semi-permanent moulds of graphite have been successful in some instances. The
More informationAll About Die Casting
All About Die Casting FAQ Introduction Die casting is a versatile process for producing engineered metal parts by forcing molten metal under high pressure into reusable steel molds. These molds, called
More informationStock Materials Interior Fillets... 10
Rapid Machining Overview... 3 Capabilities... 4 Certifications & Registrations... 4 Stock Materials... 5 Design Guidelines Tolerances... 6 Wall Thickness... 7 Outside Corners... 8 Hole Depth... 9 Interior
More informationPermanent Mold Casting Processes. Assoc Prof Zainal Abidin Ahmad Department of Manufacturing & Ind. Eng.
Assoc Prof Zainal Abidin Ahmad Department of Manufacturing & Ind. Eng. Universiti Teknologi Malaysia Permanent Mold Casting Processes Gravity die casting Pressure die casting Low pressure High pressure
More informationEldon Tool and Engineering Limited
Eldon Tool and Engineering Limited Precision engineering at its best Eldon Tool & Engineering Ltd Eldon Engineering Company Limited was established in 1975 to provide a sub-contract machining service to
More informationMolds & technologies. die. casting. molds
die casting molds Molds & technologies Company Introduction In last few decades, die casting has been instrumental in reducing the weight of an automobile contributing to fuel efficiency and lighter products.
More informationYour Idea We Achieve
- 2015 - PRESENTATION Your Idea We Achieve www.camelengineering.com Overview Presentation 1. COMPANY PROFILE 2. MARKET SHARE & INDUSTRIES 3. PROJECTS MANAGEMENT PROCESS 4. EUROPE ENGINEERING LOCATION (AUSTRIA)
More informationOur commitment to servicing our customers with quality product at competitive price and on-time delivery is backed by our continued investment in our
Our commitment to servicing our customers with quality product at competitive price and on-time delivery is backed by our continued investment in our equipment.our employees and in our systems. ABIS is
More informationWASHERS CATALOG 28,000 SIZES 2,000 MATERIALS ENDLESS POSSIBILITIES
M E T R I C E D I T I O N WASHERS 2014 CATALOG 28,000 SIZES 2,000 MATERIALS ENDLESS POSSIBILITIES Washers, Spacers and Shims Made to Order Choose from a wide variety of sizes and materials with no tooling
More informationSwastik Technocast Limited
An ISO-9001:2015 & ISO-14001:2015 Certified Co. PRECISION INVESTMENT & SAND CASTING UNIT About Us :- Founded in August-2007 and started production in January -2008. Swastik Technocast Limited is the premier
More informationAnjani Technoplast Ltd. Components Manufacturing
Anjani Technoplast Ltd. Components Manufacturing Thermoforming Molding Precision Machining Sheet Metal Stamping Tool Building Thermoforming Anjani is a pioneer in thermoformed component manufacturing.
More informationTwo Categories of Metal Casting Processes
Two Categories of Metal Casting Processes 1. Expendable mold processes - mold is sacrificed to remove part Advantage: more complex shapes possible Disadvantage: production rates often limited by time to
More informationDesign and Rapid prototype
DFM REVIEW XinHui precision mold Co.,ltd Design and Rapid prototype Ver. 2009.1 DFM REVIEW Profile XinHui precision mold company was established in July 2000, occupy 4000 m2. We engaged in Part s Design
More informationAmerica A VETERAN OWNED COMPANY. Engineering and Manufacturing Company USA COMPANY IN PENNSYLVANIA.
America A VETERAN OWNED COMPANY Engineering and Manufacturing Company ANALYSIS ENGINEERING DESIGN SOFTWARE DEVELOPMENT TESTING RAPID PROTOTYPING USA COMPANY IN PENNSYLVANIA www.scicast.com DIE CASTING
More informationElectropak Limited is an engineering company with an outstanding range of facilities. Whatever your engineering requirements are, we can help.
Electropak Limited is an engineering company with an outstanding range of facilities. Whatever your engineering requirements are, we can help. Established in 1986 with ISO 9001 and AS 9100 Rev C aerospace
More informationWe offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting
We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting bending, pressing and forming turning and milling welding - stainless,
More informationQUALITY FABRICATION INC.
QUALITY FABRICATION INC. PRECISION SHEETMETAL FABRICATION & MACHINING AS 9100 / ISO 9001 Certified 9631 IRONDALE AVENUE CHATSWORTH, CA 91311 TEL: (818) 709-8505 FAX: (818) 709-4530 http://www.quality-fab.com
More informationAATC PRESENTATION - COMPANY (1 OF 3 PRESENTATIONS REVISION 2014_0429) AATC, Inc W. Catalina Dr. Phoenix, AZ USA
AATC PRESENTATION - COMPANY (1 OF 3 PRESENTATIONS REVISION 2014_0429) 1 Investment Casting s About AATC Quality Commitment Management We want your business Investment castings reduce or eliminate alternate
More informationQUALITY CONTROL 3D MODELING
PRECISION CNC MACHINING DESIGN & DEVELOPMENT QUALITY CONTROL 3D MODELING 6435 Highway 411 South P.O. Box 130 Greenback, TN 37742 USA Telephone: +1(865) 856-2317 Fax: +1(865) 856-2092 E-mail: WYKO@Mesnac.US
More information4.1.3: Shell Casting.
4.1.3: Shell Casting. It is another expandable mold casting type; Shell molding is a casting process in which the mold is a thin shell (typically 9mm) made of sand held together by a thermosetting resin
More informationThreaded Products Gaskets & Seals Precision Machining
Threaded Products Gaskets & Seals Precision Machining FIRST CALL, ONLY CALL Dan-Loc Group was formed with the merger of Texthread, Dan-Loc Bolt & Gasket, and Spensall. Dan-Loc Group is a manufacturer and
More informationMembership Application
Membership Application Name of the Company : Key Person Name & Designation : Address : Tel : Fax : Email: Website: Name of the Nominee & Designation : Constitution : Public Ltd. Private Ltd. Proprietary
More informationManufacturing Processes (continued)
Manufacturing (continued) Machining Some other processes Material compatibilities Process (shape) capabilities Manufacturing costs Correct pg 142, question 34i should read Fig 6.18 question 34j should
More informationMachinist NOA (1998) Subtask to Unit Comparison
Machinist NOA (1998) Subtask to Unit Comparison NOA Subtask Task 1 Demonstrates safe working practices. 1.01 Recognizes potential health and safety hazards. A1 Safety in the Machine Shop 1.02 Recognizes
More informationQuality Screw Machine Components For The OEM
Quality Screw Machine Components For The OEM Description Screw Machine Specialties supplies precision screw machine parts and assemblies to world class OEM s in a wide variety of industries and markets.
More informationAdditive Manufacturing. amc.ati.org
Additive Manufacturing amc.ati.org Traditional Tooling 356-T6 lever casting for DSCR Wood pattern on matchboard Additive Manufacturing (AM) A new term but the technology is almost three decades old Formerly
More informationSHAPED BY INNOVATION.
SHAPED BY INNOVATION www.fishercast.com Engineering the best value At FisherCast Global, we are committed to engineering cost-effective, innovative manufacturing solutions for your small component production
More informationProtection of Propeller shaft
APPLICATION REPORT Protection of Propeller shaft Application: Place: Protection against bi-metallic corrosion on propeller shaft. Workshop - Chile Date: January 2015 Job and report done by: Wencon products
More informationH.G.Cockrill Corporation
Materials experience Aluminum 2011,2024,2017 5052,6061,6063 Investment castings Sand castings (continued) H.G.Cockrill Corporation Catalog and Buyer s guide Iron and steel alloys Products, Capabilities,
More informationSolidification Process(1) - Metal Casting Chapter 9,10
Solidification Process(1) - Metal Casting Chapter 9,10 Seok-min Kim smkim@cau.ac.kr -1- Classification of solidification processes -2- Casting Process in which molten metal flows by gravity or other force
More informationProfiling press braking CNC MACHINING FABRICATION FINISHING
Profiling press braking CNC MACHINING FABRICATION FINISHING +44 (0)114 321 6303 enquiries@dnametalwork.com www.dnametalwork.com Profiling Bevel Capability up to 45 LASER cutting PLASMA cutting WATERJET
More informationRONDAL. The use of slugs is extremely widespread and diverse, because they are processed in various industries, such as:
1 2 RONDAL Based on many years of experience, we provide our buyers with a wide range of high-quality stamped and sawn slugs from pure aluminium and aluminium alloys. Different dimensions and shapes with
More informationCompany profile.
MALLEABLE.CO Company profile 2 Saipamalleable.co (SMCo.) is one of the leading Iranian foundries involved in designing, producing and supplying the highest quality cast iron parts. SMCo was established
More informationPOWER TOOL ACCESSORIES
POWER TOOL ACCESSORIES SUPER PREMIUM CHALLENGER SEGMENTED SAW 100% hot press Anti clog bond system High premium treated diamonds Effortless fast cutting Segmented 105 1.8 X 8 20 Super Hard Granite and
More informationSelma Precision Technologies, NC 27576, LLC
Selma Precision Technologies, NC 27576, LLC 1 Agenda Introduction & Vision Technical Capabilities of Net Formed Gears at SPT Plan for Revival of SPT, NC, Selma Plant Investment Plan Staffing Plan & ISO
More informationMetal Casting Processes CHAPTER 11 PART I
Metal Casting Processes CHAPTER 11 PART I Topics Introduction Sand casting Shell-Mold Casting Expendable Pattern Casting Plaster-Mold Casting Introduction Metal-Casting Processes First casting were made
More informationABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials
ABRASIVE CATALOGS Reinforced Depressed Centre Grinding Discs are excellently fabricated depressed centre grinding discs that are exclusively available in varying diameters of 4-9 in different thickness.
More informationAL NASR ENGINEERING (AL QUSAIS FACILITY)
AL NASR ENGINEERING (AL QUSAIS FACILITY) CNC MACHINE SHOP, SPECIAL PURPOSE MACHINE MANUFACTURING, RETROFITTING, AVIATION EQUIPMENTS, ROBOTICS AND AUTOMATION TABLE OF CONTENTS INDUSTRIAL LICENSE COMMERCIAL
More information3D PRINTING & ADVANCED MANUFACTURING DESIGN GUIDELINES: DIRECT METAL LASER SINTERING (DMLS) STRATASYSDIRECT.COM
3D PRINTING & ADVANCED MANUFACTURING DESIGN GUIDELINES: DIRECT METAL LASER SINTERING (DMLS) STRATASYSDIRECT.COM WHAT IS DIRECT METAL LASER SINTERING? Direct Metal Laser Sintering (DMLS) is an additive
More informationBeijing TopValue Global Co.,Ltd.
Beijing TopValue Global Co.,Ltd. Value Integrity Profession Innovation Value Integrity Profession Innovation TopValue Philosophy 1) Value (Our objective is to add the value to customers, partners, employees
More informationTESTIMONIALS CREATIVE CUSTOMIZATION CALL US, NO MATTER WHAT
TESTIMONIALS CREATIVE CUSTOMIZATION ATEC Electronics Recycling, Inc. is a Computer Monitor and Television (CRT Glass) handling and recycling organization. We were called to fabricate an extraction system
More informationC L A S S C A T A L O G
C L A S S C A T A L O G Summary of Industries Served Machining Knowledge is confidence. Workholding Manual Machining Metal Cutting Abrasives CNC CNC Controls: Haas CNC Controls: GE Fanuc CNC Controls:
More informationWHERE THE WORLD MEETS INNOVATION
EN 3 www.siroco.com.pt Put all you are into the smallest thing you do. Kathy Fehst CEO It s a simple way to describe us. We like what we do and we are committed, to us, to our employees, to our customers,
More informationEngineering & Design: Additional Specification Guidelines
Section Contents NADCA No. Format Page Frequently Asked Questions (FAQ) -2 s e c t i o n Introduction -2 1 Pressure Tightness G--1-15 Guideline -3 2 Fillets G--2-15 Guideline -4 3 Ribs and Corners G--3-15
More informationTYONEK FABRICATION CORPORATION SHAREHOLDER TRAINING PROGRAM
TYONEK FABRICATION CORPORATION SHAREHOLDER TRAINING PROGRAM Within the framework of our capabilities in Huntsville, Alabama, Tyonek Fabrication Corporation would like to provide a shareholder training
More informationBLADES ENTERPRISES, LLC Trans X Drive Novi, MI Tel: Fax:
CAGE CODE: 59V92 DUNS# 826846284 JCP Cert# 0051780 NAICS: 332116, 332212, 332213, 332710, 332721, 332722, 332999, 333512, 333513, 333514,333515, 333518, 333613, 333992, 336992 FSC: 1005, 1010, 1015, 1020,
More informationOur expertise your advantage. Machine knives and precision parts
Our expertise your advantage. Machine knives and precision parts Small, sharp, sophisticated. We ve got the solution for you. We ve been making knives for the most diverse industrial fields, sectors and
More informationKnowledge about display stand wood materials. Fuyuan wood factory learning summary reporter:willian
Knowledge about display stand wood materials Fuyuan wood factory learning summary reporter:willian Ⅰ wood 1.Particleboard 2. MDF 3. Plywood 4. Solid wood board Ⅱ mechanical equipment 1. Automatic cutting
More informationTable Saw Disc Sander
instructables Table Saw Disc Sander by tomatoskins A disc sander is a must for any shop! They make quick work of shaping and smoothing stock. Getting the most out of your shop tools can often take you
More informationMultiplying Options. Keith Schneider is a big advocate for additive
By Christina Fuges Multiplying Options Additive manufacturing s greatest impact for this company is the versatility that has allowed it to offer different solutions than other manufacturers. Keith Schneider
More informationSURFACE CONDITIONING CUTTING ABRASIVES
SURFACE CONDITIONING CUTTING ABRASIVES 399 ABRASIVES SURFACE CONDITIONING POWERBLEND 503515 POWERBLEND SCD Flap Disc Surface Conditioning Super High Performance (for Angle Grinders) POWERBLEND SCD flap
More informationPayment Terms 1. T/T: 40% Deposit,30% upon T1 Sample,30% Balance before ship ment 2. L/C: irrevocable 100% L/C at sight. LKM;HASCO;DME VDI 33
Our commitment to servicing our customers with quality product at competitive price and on-time delivery is backed by our continued investment in our equipment.our employees and in our systems. ABIS is
More informationTravis Bishop. Submitted to: Dr. John Davis. Date: 3 December Course: ETME 310 Section: 004. Lab Topic: Milling Project (Vise)
Travis Bishop Submitted to: Dr. John Davis Date: 3 December 2012 Course: ETME 310 Section: 004 Lab Topic: Milling Project (Vise) Introduction: Purpose of Experiment: This experiment was conducted to teach
More informationCustomised Solutions is our Forte
Customised Solutions is our Forte 1 Introduction 80,000 Sq.Ft. of Manufacturing space, Centrally Air-Conditioned Tool Room Complete set up of Design, Manufacturing and Testing facilities under one roof
More informationInterim Logbook TOOL & DIE MAKER
Interim Logbook TOOL & DIE MAKER Department of Advanced Education and Skills Apprenticeship and Trades Certification Division Note to Apprenticeship Applicants This form can only be used to record hours
More informationDies & special components
Dies & special components 250 people working to REACH your goals High speed milling machine in VETIMEC 4 activities HPDC machine 4200 T in S.V.PETRONI 7 plants Marble milling machine in AEDIS 50 mil euro
More information