CNC Gantry-Processing Center Optimat BHX 500 series

Transcription

1 CNC Gantry-Processing Center Optimat BHX 500 series BHX /D /D 2009

2 The new BHX 500 series There s no limit to flexibility Highlights: n Workpiece thickness up to 80 mm n Controlling of the workpiece thickness n Measuring of the workpiece length n Driving speeds up to 130 m/min n High-Speed drilling ( RPM) n Automatic spindle clamping system - patented n Sealed»long-life«linear guiding system n Smooth-Pressure System n TBO-System n»the simple way«optimal access to the processing aggregates n Interface for handling solutions (e.g. robots, portal feeder etc.) n 5- or 6-sided processing of the workpieces n Double panel processing in one step n Selectable operator side Configuration Clamping-Device-System TBO-System 0025 nspindles: 2 x 32 vertical n2 x 8 horizontal in X 2 x 2 horizontal in Y ngrooving saw: 2 x 90 swivable in X- and Y-direction nrouting spindle: 2 x 6 kw ETP nfast and precise - no set-up times nmeasuring system for workpiece length ncontrolling system for workpiece thickness nworkpiecethickness up to 80 mm (2 x 40 mm) nno friction points nclamping devices clamp and release the workpiece from top AND bottom

3 Configuration variants sixth side BHX 560 BHX 560/D Variant 1: Drilling aggregate, 3 spindles Variant 2: Corner notching saw (0 / 90 / 180 ) Variant 3: Routing aggregate, 2 spindles 3 2 1»The simple way«seperated pressure beam Smooth-Pressure System air cushion 0 pressure beam s 1* s 2* s 3* 40 mm 80 mm 40 mm s 1* s 2* s 3* preasure table Pictures also can show options nif necessary the operator receives quick and simple access to the processing aggregates nby lowering the front table part, the processing one the fixed side edge is easy and safe to handle. nthe pressure beam and the pressure table create a small but very solid air cushion noptimal and smooth feeding of the workpieces ncontrolled air consumption

4 Configuration variant Doweling BHX 500/D BHX 560/D ndue to the 2 dowel inserting tools the flexibility for minimal lot sizes is also secured. One dowel inserting tool each at the left and right side of the aggregate. Outfeeding section power control PC85 Software package nfrequency-controlled outfeed transport nmaterial-protective handling via 8 electropneumatic controlled disengaging devices n17" TFT-monitor Intel Core 2 Duo Processor Modem USB frontside bus nethernet connection 10/100 Mbit Ergonomic hand terminal Position of the switch cabinet»freely selectable«(left/right) nwoodwop, MCC, MDE Basic

5 Technical data Configuration 0025 n2 x 32 spindles n2 x 8 horizontal in X n2 x 2 horizontal spindles in Y n2 x swiveling grooving saw (90 ) n2 x 6 kw ETP routing spindle OPTION 3934: additional packet: 2 x 4 vertical spindles Configuration 0026 n2 x 21 spindles n2 x 4 horizontal spindles in X n2 x 1 horizontal spindles in Y n2 x swiveling grooving saw (90 ) n2 x 6 kw ETP routing spindle OPTION 3936: additional packet: 2 x 2 vertical spindles Handling example with the Optimat ABD 100 and a vertical buffer

6 980 Technical data Dimensions in mm 800 Position of the control cabinet»freely selectable«setting up dimensions L W H S Technical Data BHX 500 Workpiece feeding dimensions Workpiece dimensions Rapid traverse speed X - Y - Z-axis Compressed air connection Compressed air required Dust extraction port Dust extraction volume Electrical power - total connection load Total machine weight Member of the HOMAG Group BHX 500/D BHX / / / / / / / / / / / / 39.4 mm / inch mm mm m/min inch bar mm m³/h kw kg BHX L BHX 560/D H BHX 500/D 960 You may contact us - WORLDWIDE BHX 560 BHX 560/D 2500 x x x x x x x x " 1x1" + 1x½" 1" 1x1 + 1x½" x Ø 280 2x Ø 280 2x Ø 280 1x Ø 160 2x Ø 280 1x Ø 160 min. 2x 4450 min. 2x 4450 min. 2x 4450 min. 2x ,5 19,5 23,5 23,5 appr appr appr appr Contact nteleservice possibility via basic internet-connection (TSN-possibility) ncompetent spare parts service nweeke Communication: Up-to-date information at all times: nany questions, new ideas, criticism & praise to: info@weeke.de WEEKE Bohrsysteme GmbH Benzstrasse Herzebrock-Clarholz GERMANY Tel.: Fax: info@weeke.de - Equipment as described in this brochure is subject to technical changes and further developments. Some photos show options which are not included in the standard machine configuration. Technical data refer to standard equipment and are not binding for the order. Optimat BHX 500 series 05/2009E