RatioLine G200/G300. Turn mill centers

Size: px

Start display at page:

Download "RatioLine G200/G300. Turn mill centers"

Cory Rosamund Atkins
5 years ago
Views:

1 RatioLine G200/G300 Turn mill centers

RatioLine G200/G300 Standard for us - future for others INDEX turn-mill centers set In case of collision, the Your system benefits: Auxiliary milling spindle for the standard for economic machine is

2 RatioLine G200/G300 Standard for us - future for others INDEX turn-mill centers set In case of collision, the Your system benefits: Auxiliary milling spindle for the standard for economic machine is protected by Main and counter spindle the B axis with 45 to 57 Nm high-precision solutions tailo- friction-locked connections based on identical torque and 6-fold tool red to the customer's needs. between headstock and components for complete storage with automatic tool Standards ranging from the machine bed and by overload machining change classic production turning clutches on all ball screws. Reduction of the cycle Glass scales for all X axes machine to tailor-made INDEX quality for long life. times achieved by working and the Z axis of the machining cells equipped with simultaneously on the main counter spindle for handling units. For the machi- The thermo-symmetric and counter spindle with up maximum precision ning of simple to highly com- headstock with its controlled to 3 turrets Integrated workpiece plex parts, in small to large lot heat transfer perpendicularly Y axis for off-center drilling handling for loading or sizes, INDEX is offering consi- to the tool plane impresses and milling work with large discharge of shaft and stently economic and techno- by its superior turning working range from 120 to chuck parts logically superior solutions. precision. 180 mm stroke NC tailstock and steady B axis with 360 swiveling rests for the complete We provide you with an Also manufactured with the range for machining at any machining of shafts individually configured known INDEX precision are: desired angle using simple machine for your production The highly rigid, rugged main standard tools on the main tasks. You can choose among spindles with a large diameter and counter spindle a multitude of universal units, in the front bearing. The high such as the machine bed and maximum speeds ensure spindles, available in various optimum and economical designs, different turret types, machining from the small to tailstocks, steady rests and the large workpiece. handling systems in accordance with your requirements. A solid construction - added value already in the machine construction The tubular machine bed made of heavily ribbed cast iron convinces by its maximum bending and torsional stiffness as well as excellent dampening. High-quality linear guideways provide precision in combination with a long service life. 2

4 RatioLine G200 All your options are open! You decide on the configuration of the machine. The clearly structured building block system offers the distinct advantage of incorporating exactly those functions into the machine that are necessary for your applications - not more, not less. INDEX G200 universal and individual Select your motor spindle among a modular series of spindles from 42 to 65 mm bar capacity. The hollow shaft motors with a patented air cooling system provide a continuous power of up to 20 kw. Chucks with diameters from 110 to 165 mm can be used depending on the spindle. Select the suitable turret types depending on your machining tasks. Tailstock and steady rests complete the selection. Handling systems integrated in the machine can be added if desired. 4

RatioLine G300 INDEX G300 highly flexible for the machining of chuck and

capacities of 65, 90 and 102 mm and chucks with up to 315 mm diameter.

kw. Three turrets in different versions are available for more complex

5 RatioLine G300 INDEX G300 highly flexible for the machining of chuck and shaft parts Compared to the G200, the G300 offers larger spindles with bar capacities of 65, 90 and 102 mm and chucks with up to 315 mm diameter. The high-performance motor spindles provide a continuous power of 19 to 43 kw. Three turrets in different versions are available for more complex machining tasks. The machine bed is available in two sizes with 710 and 1250 mm turning length. 5

RatioLine G200/G300 The solution in detail If you want to increase the 10/12-station turret Y / B axis - maximum Tailstock productivity, reduce costs and 2 turret types are available for precision in

6 RatioLine G200/G300 The solution in detail If you want to increase the 10/12-station turret Y / B axis - maximum Tailstock productivity, reduce costs and 2 turret types are available for precision in any position The manually positioned find new machining potentials, the G300: turrets with 10 or The Y axis runs in a hydrostatic tailstock is suitable for many our wide experience will help 12 stations. We offer fixtures circular guide. This stiff and applications. The approach you to find intelligent for different tool systems for precise guide is the basis for movement of the quill is solutions: adaptation to your special the 360 B axis swiveling hydraulically controlled via the requirements. range for machining at any program. 14-station turret desired angle. Therefore, the The programmable tailstock The turret of the G200 is Powerful tool drives turret can be used without which can be positioned equipped with 14 stations. You always use full machining any restrictions on the main electrically makes it possible With 2 turrets, 28 tools can capacity since only the tool and counter spindle, even if it to cover the most different be used. This offers distinct actually used is driven. The is equipped with long tools. support lengths. The setting benefits for the production of strong milling spindle in force is predefined in the more complex parts and leads connection with the B axis Steady rests parts program and controlled to a reduction of the setup stands for heavy machining The use of single or double via the motor current. times in case of small lot with a three times higher steady rests depends on the Practical: The tailstock can be sizes. torque. A magazine increases task to be executed. They are moved away for machining the number of tools by further self-centering and are the workpiece end face. 6 tools. attached to the steady rest carrier or to the lower turret and can be positioned directly in the parts program. 6

8 8

RatioLine G200/G300 Handling systems integrated in the machine WHU The universal workpiece handling for chuck parts and short shaft parts WHW The workpiece handling for

position in handling systems are a reduction of the set-up manufacturing cell by means the working area while the characterized by the small efforts. of WHU/WHW.

It picks up amount of space required, pieces are fed to the machine the finished part and, at the short travels and fast cycle externally on pallets or a same time, loads

A fully automatic control is also completely there again with correct measuring station can be integrated in the machine position orientation (adapted integrated in the

9 RatioLine G200/G300 Handling systems integrated in the machine WHU The universal workpiece handling for chuck parts and short shaft parts WHW The workpiece handling for longer shaft parts Your machine can be expand- double gripper puts the blank The integrated INDEX and safe setup which leads to ed to a fully automatic part in the stand-by position in handling systems are a reduction of the set-up manufacturing cell by means the working area while the characterized by the small efforts. of WHU/WHW. The work- machine is running. It picks up amount of space required, pieces are fed to the machine the finished part and, at the short travels and fast cycle externally on pallets or a same time, loads the blank times. The WHU/WHW conveyor and are deposited part. A fully automatic control is also completely there again with correct measuring station can be integrated in the machine position orientation (adapted integrated in the process, if control. This enables to the requirements of the desired. convenient programming, fast production processes). The Workpiece receiving unit Precision parts from bar stock are picked up directly from the spindle by means of a gripper and deposited on a discharge conveyor. The risk of damage to sensitive parts is thus excluded. The pick-up movements and positions can be programmed which thereby leads to a reduction of the setup times. 9

RatioLine G200/G300 Increased efficiency through intelligent control solutions Comfortable control cycles Extremely comfortable control cycles support your programmer in recurring tasks, such as:

10 RatioLine G200/G300 Increased efficiency through intelligent control solutions Comfortable control cycles Extremely comfortable control cycles support your programmer in recurring tasks, such as: Rigid tapping Thread chasing Deep hole drilling with cyclic chip removal Cutting cycles Workpiece transfer to the counter spindle with automatic length correction Workpiece handling Special cycles make it possible to easily program more complex machining tasks with difficult geometries, such as the use of the C, Y or B axis. The fields of programming Open control on-site or the teleservice in Optional process and set-up offer big potential The control based on the the INDEX service center. The monitoring for cost reduction. With the Windows NT operating information is displayed in The control can also be used INDEX C200-4D, based on the system offers optimum clear text on the screen. for a variety of other tasks. Siemens 840D powerline, conditions for the integration Comprehensive operating and We optionally offer: INDEX offers the ideal control in modern communication error messages make it Tool breakage and wear concept you need. The result: networks. The optional ISDN possible to eliminate faults monitoring most modern and up-to-date interface allows the control quickly. In-process measurement technology combined with to be integrated in the INDEX with measuring probes practice-oriented and user- teleservice. Extensive Post-process measurement friendly application. diagnosis displays for the with external gauges control and machine states Tool measurement inform the service engineers 10

RatioLine G200/G300 Programming lot size 1 with TurboH200 The TurboH200 option enables fast and comfortable programming of turning, grooving, drilling and milling work starting with lot size 1

11 RatioLine G200/G300 Programming lot size 1 with TurboH200 The TurboH200 option enables fast and comfortable programming of turning, grooving, drilling and milling work starting with lot size 1 directly at the machine. The contour of the blank and the finished part is defined based on predefined geometrical elements, such as cylinders, tapers or by means of a contour description. The operator is guided automatically and in a functional sequence through the programming process. Raw part definition Definition of the external and internal geometry of the finished part Definition of clamping Offline programming with Wire-EDM and Profile of course possible to update position and clamping the INDEX System200 grinding. The software has a the System200. All functions means If you prefer programming modular structure and ranges which require machines Generation of the one or several machines on from universal CAD/NC equipped with the latest machining steps an external PC in the coupling to DNC operation for technology can be realized Simulation with collision workshop or in the planning fast data transfer. Several thanks to the continuous control department, we offer clearly arranged and user- enhancement of the TurboH200 also for external friendly programming System200 - a NC The workplan with the PCs. TurboH200 is part of the interfaces which you can programming system from selection of the tools and INDEX System200 which is a switch efficiently and quickly the user for the user! cutting values is created universal, machine- and are available for the creation automatically. Thus, the NC control-independent NC of programs. The networkable program is very close even in programming system with software is equipped with case of extremely complex geometrically and interfaces to common workpieces. technologically powerful software. System200 can also functions including graphic be delivered as a turnkey simulation. It supports the system and configured and machining processes Turning, implemented according to the Milling, Drilling, Punching, customer requirements. It is 11

12 RatioLine G200 Technical data G200 Working range Turning length mm 400 Swing diameter mm 420 Main spindle, counter spindle D42 D60 D65 Bar capacity (max. bar diameter) mm Spindle O.D. front bearing mm Spindle nose ISO 702/1 Size mm (1) 140 mm (2) Chuck diameter mm 140 / / Speed rpm Power (at 100% kw 20 (13) 20 (13) 20 (13) (counter spindle) Torque (at 100%) Nm 95 (61) 95 (61) 95 (61) (counter spindle) Indexing and loading attachment degrees 2,5 2,5 2,5 C axis resolution degrees 0,001 0,001 0,001 Z axis rapid traverse (counter spindle) m/min Tool carrier 1 (upper) X Z Y B Slide travel (XZ) mm Slide travel (XYZ) mm Slide travel (XYZB) mm (degrees) Rapid traverse m/min 22,5 45 7,5 180 (degrees/sec) Tool carrier 2 (lower) X Z Slide travel mm Rapid traverse m/min 22,5 45 Turret 1 and 2 Number of stations 14 Tool system DIN mm 25 x 48 Tool drive speed rpm 6000 Tool drive power (at 25%) kw 5,5 Tool drive torque (at 25%) Nm 15 Milling spindle Speed rpm 2000 Power (at 25%) kw 5,5 Torque (at 25%) Nm 45 Tool holding fixture HSK-B50 Tool magazine, number of stations 6 Tailstock hydraulic NC Center distance mm Stroke mm Setting force N Taper DIN 2079 SK30 SK30 Weights and connecting power (max. configuration) Weight approx. kg 5500 Connecting power 42 kw, 53 kva, 80 A, 400 V, 50 / 60 Hz Control INDEX C200-4D (basis Siemens 840D powerline) (3) (1) taper D85 internal or D140 external and optionally short taper (2) taper D140 external, tensile stress only admissible with gripper and chuck clamping (3) optionally INDEX C200-4C (based on Siemens 840C) 12

13 RatioLine G G G200 / WHU

14 RatioLine G300 Technical data G300 Working range Turning length mm 710 / 1250 Swing diameter mm 590 Main spindle, counter spindle D65 D90 D102 Bar capacity (max. bar diameter) mm Spindle O.D. front bearing mm Spindle nose ISO 702/1 size Chuck diameter mm 200 / / / 315 Speed rpm Power (at 100%) kw 43 (28) 43 (28) 25 (19) (counter spindle) Torque (at 100%) Nm 275 (178) 275 (178) 240 (181) (counter spindle) Indexing and loading attachment degrees 2,5 2,5 2,5 C axis resolution degrees 0,001 0,001 0,001 Z axis rapid traverse (counter spindle) m/min 22,5 22,5 22,5 Tool carrier 1 (upper right) X Z Y B Slide travel (XZ) mm / 1250 Slide travel (XZ) version W mm / 1150 Slide travel (XYZ) mm / Slide travel (XYZB) mm / (degrees) Rapid traverse m/min ,5 90 (degrees/sec) Tool carrier 2 (lower) X Z Slide travel mm / 1245 Rapid traverse m/min Tool carrier 3 (top left) X Z Slide travel (XZ) version W mm / 1150 Rapid traverse m/min Turret 1, 2 and 3 DIN DIN (1) HSK-B50 (2) Capto C4 Tool system mm 30 x x 63 Number of stations Number of stations driven Tool drive speed rpm 6000 Tool drive power (at 25%) kw 9,4 Tool drive torque (at 25%) Nm 19 Milling spindle Speed rpm 2000 Power (at 25%) kw 9,4 Torque (at 25%) Nm 57 Tool holding fixture HSK-B50, Capto C4 Tool magazine, number of stations 6 Tailstock hydraulic NC Center distance mm 680 / / 1280 Stroke mm / 1310 Setting force N Taper DIN 2079 SK30 SK30 Weights and connecting power (max. configuration) Weight approx. kg 7700 / Connecting power 72 kw, 90 kva, 160 A, 400 V, 50 / 60 Hz Control INDEX C200-4D (basis Siemens 840D powerline) (3) (1) only for XZ tool carrier, max. nom. turning diameter approx. 230 mm (2) manual (3) optionally INDEX C200-4C (based on Siemens 840C) 14

15 RatioLine G G300 / 710 mm G300 / WHU G300 / 1250 mm

16 LL KS Printed in Germany Subject to change without prior notice INDEX-Werke GmbH & Co. KG Hahn & Tessky Plochinger Straße Esslingen, Germany Tel. +49 (711) Fax +49 (711)

MultiLine MS40C MS40P. CNC Multi Spindle Turning Machines

MultiLine MS40C MS40P. CNC Multi Spindle Turning Machines MultiLine MS40C MS40P CNC Multi Spindle Turning Machines MultiLine MS40C/MS40P INDEX CNC multi-spindle machine: the standard! With two model options fully configurable as desired, we offer you a machine