A Part. Hammer Assembly
|
|
|
- Damon Stevenson
- 5 years ago
- Views:
Transcription
1 ITEM NO. PART NUMBER DESCRIPTION round shaft/qty. driver_shaft_ Finished Blade Shaft tube_ Tube handle_ Hammer Handle 4 Head_plastic_face Hammer Head Head_plastic_face_ Plastic Face 6 socket set screw cup point_ai /4-x.7 Set Screw 6 4 FRACTIONAL /" ANGULAR: MACH. BEND TWO PLACE DECIMAL. THREE PLACE DECIMAL. INTERPRET DRAWING PER: ASME Y Steel/Acrylic onto head. Hammer Assembly /9/ DKR /9/ SCALE: : WEIGHT: SHEET OF 7 4 Hammer_plastic_face_
2 Operations List Trak CNC Lathe Turn radiuses, Cutoff Program 8 Trak CNC Lathe Face Cleanup, Drill DRO Sherline CNC Mill Mill Flutes R.. DEEP (6 PLACES) R.48 R.9 R.7 R. R Prog 8 notes FRACTIONAL /" ANGULAR: MACH. BEND TWO PLACE DECIMAL. THREE PLACE DECIMAL. INTERPRET DRAWING PER: ASME Y Acetel Hammer Handle /9/ DKR /9/ SCALE: : WEIGHT: Hammer_plastic_face_ SHEET OF 7
3 Saw Cut stock to 6-7/8 length Trak CNC Lathe Face/Turn/Center Drill one end Trak CNC Lathe Turn profile/thread/groove Prog 7 4 Wire brush wheel Burnish threads Prog 7 notes. DETAIL C SCALE :.. STOCK R CENTER DRILL C CHAMFER 6 DEG X.4 7/6- UNF THREAD.6 GROOVE.6 DIA.6 GROOVE.6 DIA (TO AID MILLING) FRACTIONAL /" ANGULAR: MACH. BEND TWO PLACE DECIMAL. THREE PLACE DECIMAL. INTERPRET DRAWING PER: ASME Y Low Carbon Steel CNC turned shaft /9/ DKR /9/ SCALE: : WEIGHT: Hammer_plastic_face_ SHEET OF 7
4 Emery cloth Polish shaft Trak Mill Machine blade shape/trim end/engrave Torch/casenite Heat treat and temper blade 4 Emery cloth Polish blade faces Lathe Knurl /" of shaft for friction fit 4.7 D.4. REMOVE CENTERDRILL MATL D VIEW D-D KNURL / INCH LENGTH FRACTIONAL /" ANGULAR: MACH. BEND TWO PLACE DECIMAL. THREE PLACE DECIMAL. INTERPRET DRAWING PER: ASME Y Low Carbon Steel Finished Blade Shaft /9/ DKR /9/ SCALE: : WEIGHT: Hammer_plastic_face_ SHEET 4 OF 7
5 Saw Cut stock to 4-/8 inch length Engine Lathe Face end/countersink Engine Lathe Drill 4 Engine Lathe Tap (Use tap guide, tailstock) THRU ALL 7/6- UNF.6.4 X 6, NEAR SIDE FRACTIONAL /" ANGULAR: MACH. BEND TWO PLACE DECIMAL. THREE PLACE DECIMAL. INTERPRET DRAWING PER: ASME Y / steel tubing /9/ DKR /9/ Tube SCALE: : WEIGHT: Hammer_plastic_face_ SHEET OF 7
6 Saw Cutoff long enough to make two heads ( inches) Engine Lathe Face/ Chamfer Hammer face Engine Lathe Turn Grooves - regrip for each groove 4 Engine Lathe Knurl Saw Cutoff hammer head -/8 6 Engine Lathe Face/Turn to. length 7 Bridgeport Drill/Ream (use fixture block to locate centers) 8 Engine Lathe Centerdrill/Drill/Tap /4- R. x. DEEP TYP. /64 DRILL.7 REAM.. X 4. CHAMFER KNURL. THRU /4- UNC THRU FRACTIONAL /" ANGULAR: MACH. BEND TWO PLACE DECIMAL. THREE PLACE DECIMAL. INTERPRET DRAWING PER: ASME Y Low Carbon Steel Hammer Head /9/ DKR /9/ SCALE: : WEIGHT: Hammer_plastic_face_ SHEET 6 OF 7
7 Prog..4 /4- UNC.4. / CHAMFER.7 FRACTIONAL /" ANGULAR: MACH. BEND TWO PLACE DECIMAL. THREE PLACE DECIMAL. INTERPRET DRAWING PER: ASME Y ABS Plastic Plastic Face /9/ DKR /9/ SCALE: : WEIGHT: Hammer_plastic_face_ SHEET 7 OF 7
HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
Machinist NOA (2010) Subtask to Unit Comparison
Machinist NOA (2010) Subtask to Unit Comparison NOA Subtask Task 1 Organizes work. 1.01 Interprets documentation. A16 Job Planning 1.02 Plans sequence of operations. A16 Job Planning 1.03 Maintains safe
Free Length Approx. LOAD (Lbs) Free Length Approx. LOAD (Lbs) Free Length Approx. LOAD (Lbs) Free Length Approx. LOAD (Lbs)
Poly stocks urethane spring lengths as indicated on the following pages, plus a 24-inch length. We also cut to any desired length (up to 24 inches) although this material may be easily cut to length using
MINI-LATHE QUICK CHANGE TOOL POST
MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here
COMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed)
COMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards. Wear, adjust,
Travis Bishop. Submitted to: Dr. John Davis. Date: 3 December Course: ETME 310 Section: 004. Lab Topic: Milling Project (Vise)
Travis Bishop Submitted to: Dr. John Davis Date: 3 December 2012 Course: ETME 310 Section: 004 Lab Topic: Milling Project (Vise) Introduction: Purpose of Experiment: This experiment was conducted to teach
AN ROINN OIDEACHAIS AGUS EOLAÍOCHTA THE JUNIOR CERTIFICATE METALWORK SYLLABUS. Contents
AN ROINN OIDEACHAIS AGUS EOLAÍOCHTA THE JUNIOR CERTIFICATE METALWORK SYLLABUS Contents METALWORK...2 TECHNIQUES AND DESIGN...3 MATERIALS AND TECHNOLOGY...5 METALWORK General Aims. The course provides an
Entry Level Assessment Blueprint Precision Machining
Blueprint Precision Machining Test Code: 4152 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Organization and Shop Practices Demonstrate safe work habits and operating procedures
Lathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.
Machine Tool Technology/Machinist CIP Task Grid
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 102 Identify & explain safety equipment and procedures. 103 Identify
Chapter Tests and Problems
Chapter Tests and Problems Chapter 11 Fasteners and Springs Test INSTRUCTIONS Answer the questions with short, complete statements or drawings as needed. QUESTIONS Define the screw thread terms given in
NABTEB Past Questions and Answers - Uploaded online PAST QUESTIONS AND ANSWERS GENERAL METAL WORK MAY/JUNE 2009
PAST QUESTIONS AND ANSWERS GENERAL METAL WORK MAY/JUNE 2009 1a. Enumerate TWO safety measures each as regards the use of the following hand tools. 1. Scriber 2. Chisel 3. File 4. Try-square 1. Scriber:
Making Cam Action Edge Clamps, version 2 *
Making Cam Action Edge Clamps, version 2 * By R. G. Sparber 01/15/2008 Copyleft protects this article. The idea of making these clamps came from Brian Lamb. They work great. If you have more money than
Machine Tool Technology/Machinist CIP Task Grid
1 Secondary Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machoning industry. 102 Identify & explain safety equipment and
Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018
Unit/Standard Number High School Graduation Years 2016, 2017 and 2018 Machine Tool Technology/Machinist CIP 48.0501 Task Grid Secondary Competency Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational
Job Ready Assessment Blueprint. Precision Machining. Test Code: 4052 / Version: 01. Copyright All Rights Reserved.
Job Ready Assessment Blueprint Precision Machining Test Code: 4052 / Version: 01 Copyright 2009. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written
COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004
1 COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004 I. OBJECTIVE To provide an overview and basic knowledge of the
Name: Machine Tool Technology ( )
Name: Machine Tool Technology (58.0501) Directions: Evaluate the student by checking the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no experience/knowledge
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF
MASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
JOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: Maintenance Mechanic Machine Shop Practical Hours: 250 hrs. JOB QUALIFICATION STANDARD (JQS) DOL Standard: Manual Machining Fundamentals: Apply a working knowledge of metal removal
TAP AND DRILL BIT SELECTION GUIDE TAPS AND DIES. NATIONAL STANDARD THREADS Imperial (NC, NF, NS, UNC and UNF)
TAP AND DRILL BIT SELECTION GUIDE NATIONAL STANDARD THREADS Imperial (NC, NF, NS, UNC and UNF) THREAD NOMINAL SIZE THREAD STANDARD DRILL SIZE* DECIMAL 0 80 NF 3/64".0469" 1 64 NC 53.0595" 1 72 NF 53.0595"
COMPETENCY ANALYSIS PROFILE MOULD MAKER 431A (All unshaded skill sets must be demonstrated/completed)
COMPETENCY ANALYSIS PROFILE MOULD MAKER 431A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards in the workplace. Wear,
Lathe. A Lathe. Photo by Curt Newton
Lathe Photo by Curt Newton A Lathe Labeled Photograph Description Choosing a Cutting Tool Installing a Cutting Tool Positioning the Tool Feed, Speed, and Depth of Cut Turning Facing Parting Drilling Boring
COMPETENCY ANALYSIS PROFILE GENERAL MACHINIST 429A. (All unshaded skill sets must be demonstrated/completed)
COMPETENCY ANALYSIS PROFILE GENERAL MACHINIST 429A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards. Wear, adjust, and
Cross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
Engineering Data Rail Lifters
Engineering Data Rail Lifters Bolt On Ready Stock Rails This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 12/13 - Rev.
SLIDE SHAFT PRODUCTS. 777 Schwab Road, Suite T, Hatfield, PA Toll Free: Fax:
SLIDE SHAFT PRODUCTS Materials Materials of NB slide shafts are selected AISI 52100, 1060, and 0C (or equivalent) on the basis of hardenability, fatigue strength, wear resistance, and toughness. AISI
Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations, Boring, Reaming, Tapping)
1 Manufacturing Processes (2), IE-352 Ahmed M El-Sherbeeny, PhD Spring 2017 Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations,
D E S I G N A N D M A N U F A C T U R E : C O U R S E M A T E R I A L
UNIT D E S I G N A N D M A N U F A C T U R E : C O U R S E M A T E R I A L metalwork processes Screw Threads The screw thread is a very important detail in engineering. It is used to hold parts together.
Made in USA. Download a full set of drawings from MorrisonandMarvin.com. Vise Assembly MORRISON & MARVIN ENGINE WORKS
Download a full set of drawings from MorrisonandMarvin.com Made in US DESIGNED Y DRWN Y ox 555 enton City, W 99320 US 4:1 Vise ssembly 1 of 18 1 14 3 6 7 18 5 2 11 12 9 10 13 1 15 16 17 Download a full
Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet
Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student
SHERLINE Drill Chucks
SHERLINE Drill Chucks P/N 1010/1015 (5/32"), P/N 1072 (1/4") and P/N 1069 (3/8") Chuck and Drill Sizes The size of the chuck indicates the largest size drill shank it will hold. Larger chucks will hold
AMETAL SHAPER is indispensable for certain METAL SHAPER FOR YOUR SHOP. By S. S. Miner
METAL SHAPER FOR YOUR SHOP By S. S. Miner AMETAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
A Countersink Gage, version 1.0
A Countersink Gage, version 1.0 By R. G. Sparber Protected by Creative Commons. 1 Marv Klotz recently presented a very nice design for a countersink gage on the Home Made Tools site: http://www.homemadetools.net/forum/countersink-gage-56314
LOC ATING COMPONENTS. Locating Components
Adjustable Jack Screws... 212 Adjustable Locating Buttons... 212 Alloy Steel Pull Dowel Pins...198 199 Bullet Nose Dowels... 219 Bullet Nose Pins... 220 Drift Handles... 213 Fixture Jacks... 212 Fixture
Machining The Clapper Pin and Hole, Version 2
Machining The Clapper Pin and Hole, Version 2 By R. G. Sparber 08/27/2008 Copyleft protects this article. Since I do metal working as a hobby, I am more interested in the journey than the destination.
Tool & Cutter Grinder
Tool & Cutter Grinder The Bonelle Tool and Cutter grinder (based on prof. Chaddock s Quorn) can be used to grind most kind of tools from lathe tools to end-mills and reamers. I have been grinding my end-mills
NIMS Machining Level I Preparation Guide. Job Planning, Benchwork, and Layout
NIMS Machining Level I Preparation Guide Job Planning, Benchwork, and Layout Table of Contents Overview pages 2 5 Introduction page 2 Who Wrote the Questions page 2 How to Prepare for the Credentialing
Drilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL.
Drilling Machine Drilling Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL. The machine used for drilling is called drilling machine. The drilling
APPENDIX A TOOLMAKER D.O.T. CODE O*NET CODE As Revised for MACNY, The Manufacturers Association
STATE OF NEW YORK DEPARTMENT OF LABOR APPENDIX A TOOLMAKER D.O.T. CODE 601.280-042 O*NET CODE 51-4111.00 As Revised for MACNY, The Manufacturers Association This training outline is a minimum standard
Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
MACHINIST TECHNICIAN - LATHE (582)
DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble, test products, and modify metal parts using machine shop and CNC processes in support of other manufacturing,
Machinist A Guide to Course Content
Machinist A Guide to Course Content Machinists work with metals; operate metal-cutting and shaping machinery. Training Requirements: To graduate from each level of the apprenticeship program, an apprentice
FUNDAMENTAL MANUFACTURING PROCESSES Plastics Machining & Assembly NARRATION (VO): NARRATION (VO): NARRATION (VO): INCLUDING: METALS,
Copyright 2002 Society of Manufacturing Engineers --- 1 --- FUNDAMENTAL MANUFACTURING PROCESSES Plastics Machining & Assembly SCENE 1. CG: Plastics Machining white text centered on black SCENE 2. tape
Installing CNC Stepper Motor Mounts On A Sherline Lathe
Installing CNC Stepper Motor Mounts On A Sherline Lathe P/N 6720 (6725 Metric) 4000/4100/4500/4600 Lathes P/N 6730 (6735 Metric) 4400/4410 Lathe USING THE TEMPLATE BLOCKS TO LOCATE NEW MOUNTING HOLES FOR
Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
TECHNICAL DESIGN II (546)
DESCRIPTION The second in a sequence of courses that prepares individuals with an emphasis in developing technical knowledge and skills to develop working drawings in support of mechanical and industrial
ICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)
ICS CUTTING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com COMBINED DRILL & COUNTERSINKS COBALT PLAIN TYPE...5 BELL
MACHINIST TECHNICIAN - LATHE (582)
DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble, test products, and modify metal parts using machine shop and CNC processes in support of other manufacturing,
J D SQUARED INC. NOTCH MASTER Tube and Pipe Notcher Operating Instructions
Copyright (c) 2006 J D SQUARED INC. www.jd2.com NOTCH MASTER Tube and Pipe Notcher Operating Instructions Angled Notches PATENT PENDING Straight Notches Offset Notches Tube Clamp Slider Tube Clamp Exploded
Machining I DESCRIPTION. EXAM INFORMATION Items
EXAM INFORMATION Items 50 Points 62 Prerequisites NONE Grade Level 10-12 Course Length ONE SEMESTER DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble,
Design Guide: CNC Machining VERSION 3.4
Design Guide: CNC Machining VERSION 3.4 CNC GUIDE V3.4 Table of Contents Overview...3 Tolerances...4 General Tolerances...4 Part Tolerances...5 Size Limitations...6 Milling...6 Lathe...6 Material Selection...7
Manufacturing Technician Training
Mike McKinney / Jefferson College I. Objective: Developed to meet the industry demands and provide a six-week certification program to fast track individuals to secure a position in the manufacturing industry
LocoGear. Technical Bulletin - 02 January 11, by LocoGear LIVE STEAM CASTINGS. Tech Bulletin - 02
LIVE STEAM CASTINGS Tech Bulletin - 02 LocoGear Technical Bulletin - 02 January 11, 2003 2003 by LocoGear John D.L. Johnson 3879 Woods Walk Blvd. Lake Worth, FL 33467-2359 jjohnson@locogear.com www.locogear.com
SPECIALIZED WATCH MAKING TOOLS 03 2 LATHES RIVETING STAKES 03 20
03 SPECIALIZED WATCH MAKING TOOLS 03 2 LATHES 03 12 RIVETING STAKES 03 20 SPECIALIZED WATCH MAKING TOOLS i Tools for locking/unlocking oscillating weight bolts. S Cal. 2892 and 7750 For calibres Base holder
INTRODUCING YG-1 TAPS COLOUR BAND MACHINE TAPS HAND TAPS PIPE TAPS
INTRODUCING YG-1 TAPS COLOUR BAND MACHINE TAPS HAND TAPS PIPE TAPS TAP SELECTION GUIDE HAND TAPS 3 SPIRAL POINT TAPS Plug Style 4 SPIRAL FLUTE TAPS Bottoming Style 5 SPIRAL POINT TAPS Plug Style 6-7 SPIRAL
Pennsylvania College of Technology One College Ave. Williamsport, PA Student ID Number:
Pennsylvania College of Technology One College Ave. Williamsport, PA. 17701-5799 Name: School: Student ID Number: Date: COMPETENCY ASSESSMENT FOR MACHINIST GENERAL (MG) MACHINE TOOL TECHNOLOGY (MY) AUTOMATED
DRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
Powder Actuated Fasteners - Drive Pins
122 Drive Pins Standard Pins Drive pins with a.300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured
Various Bolt Removal Process
Various Bolt Removal Process Introduction I have been climbing for over 25 years. The first bolt I placed in 1987 was a 5/16 Rawls carbon steel, split shank, button head in sandstone. Certainly the wrong
Tools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File. 2. Cut the stock Place stock in vise and cut with hack saw
Purpose: MAKE CATAPULT ARM Step 1 Tools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File Materials: Flat aluminum ½ inch stock (see picture below) Gloves required 1. Pick up the aluminum ½
Tool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
WORKSHOP DRAWING & DESIGN STANDARDS
WORKSHOP DRAWING & DESIGN STANDARDS Purpose: Function: Content: This handout is intended to provide a summary of basic drawing guidelines which will: a) enhance communication between you and the workshop
Various Bolt Removal Process
Various Bolt Removal Process Introduction I have been climbing close to 30 years. The first bolt I placed in 1987 was a 5/16 Rawls carbon steel, split shank, button head in sandstone. Certainly the wrong
9000 Level. DS-703 Page 1 of 22 3 TITLE WORK INSTRUCTIONS, GENERAL PRINT AMENDMENT
evel DS-70 Page 1 of 22 TITE WORK INSTRUCTIONS, GENERA PRINT AMENDMENT Revision EXPANATION OF CHANGE Approvals DATE A Initial Release WB, GR 2/26/99 B C D E F G Add PMR caveat WB, GR 5/1/99 Add Surface
Dimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards
Dimensioning Dimensions: Are required on detail drawings. Provide the shape, size and location description: - Size dimensions - Location dimensions - Notes Local notes (specific notes) General notes ASME
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The
PPM-5710 JK HEAVY DUTY SKID PLATE ASSEMBLY Version 2.0
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 PPM-5710 JK HEAVY DUTY SKID PLATE ASSEMBLY Version 2.0 GENERAL NOTES: These instructions are also available on our website; www.synergymfg.com.
POS Perkins Statewide Articulation Agreement Documentation Coversheet
POS Perkins Statewide Articulation Agreement Documentation Coversheet Student Name: Secondary School Name: Secondary School Address: CTE Program of Study: CIP # CIP Program Name Grade 9 1. CAREER AND TECHNICAL
Installing CNC Stepper Motor Mounts On A Sherline Mill
Installing CNC Stepper Motor Mounts On A Sherline Mill P/N 6700 (6710 Metric) 5000/5100/5400/5410 Mills P/N 6705 (6715 Metric) 2000/2010 Mills USING THE TEMPLATE BLOCKS TO LOCATE NEW MOUNTING HOLES FOR
OWNER: POSITION AUTHOR: POSITION Dan Boettcher Director of Engineering Richard Richardson Vice-Dir of Engineering
KRESS CORPORATION ENGINEERING Design of Thru and Threaded Holes Standard DOC ID 095007 REVISION A TYPE PORTAL OWNER: POSITION AUTHOR: POSITION Dan Boettcher Director of Engineering Richard Richardson Vice-Dir
Spotlight
Spotlight 2010 www.vargus.com Specials Advanced Tailor Made Solutions Inserts Solid Carbide Toolholders Mega Line Special Solution for Extra Large Pitches (up to 24mm) Designed to be extra tough, use the
Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2
Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2 Published by SOLAS 2014 Unit 3 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4
Machine Your Fishing Reel
Machine Your Fishing Reel You will be well prepared for the coming season if you start on this smooth-running job now. IF you're an enthusiastic fisherman and have a lathe in your workshop, we'll say no
Manufacturer & Exporter of: Tube Cleaning Equipments such as Flexible Shafts, Brushes, Cutters, Tube Expanders, Construction Equipments Concrete
Manufacturer & Exporter of: Cleaning Equipments such as Flexible Shafts, Brushes, Cutters, Expanders, Construction Equipments Concrete Vibrators, Flexible shaft Grinders & Accessories. SERRATING / GROOVING
Machinist NOA (1998) Subtask to Unit Comparison
Machinist NOA (1998) Subtask to Unit Comparison NOA Subtask Task 1 Demonstrates safe working practices. 1.01 Recognizes potential health and safety hazards. A1 Safety in the Machine Shop 1.02 Recognizes
A M Supply Co. Metalworking Machinery. Drill Presses Jet Tools J-2221VS 20" Variable Speed Drill Press 115/230V 1Ph
Drill Presses J-2221VS 20" Variable Speed Drill Press 115/230V 1Ph Part # Style Drills to Center Drilling Cap. Cast Drilling Cap. Mild Distance Column Circle Iron Steel to Spindle 354221 Variable 20" 1-1/4"
ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
Stock Materials Interior Fillets... 10
Rapid Machining Overview... 3 Capabilities... 4 Certifications & Registrations... 4 Stock Materials... 5 Design Guidelines Tolerances... 6 Wall Thickness... 7 Outside Corners... 8 Hole Depth... 9 Interior
SQ2 User Instructions SQ2 Overview:
SQ2 User Instructions SQ2 Overview: The stationary circular saws including table, radial and chop saws are arguably the most important tools in the shop. They may also be the most difficult to reliably
Audi > C5 > Suspension, Wheels, Steering 40 - Drive shafts with tripod joint AAR 3300 i, servicing
Page 1 of 10 Audi > C5 > 1998-2005 Suspension, Wheels, Steering 40 - Drive shafts with tripod joint AAR 3300 i, servicing Tripod joint AAR 3300 i, disassembling and assembling Special tools, testers and
A BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY
2011 Threading Solutions for Every Industry A BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY At Balax, we recognize the increased demands placed on our customers for improved quality and lower production
Caution: Always use safety glasses or a full face shield when turning anything on a lathe.
May 26, 2009 Making a 6 Peppermill Page 1 Acknowledgment is given to Jackie Johnson from Nashville, TN for providing the original instructions and method for this article. The design of this mill can be
College of Forestry 610: Power Tools
College of Forestry 610: Power Tools Safety Policy & Procedure Manual Section 600: Workshops and Shop Tools Effective: 01 January 2007 Revised: August 2014 PURPOSE The purpose of this section is to provide
STI-SCREW THREAD INSERT TAP OPTIONS
-SCREW THREAD INSERT TAP OPTIONS EXPANDED OFFERING SCREW THREAD INSERT TECHNOLOGY PREVENT STRIPPING on Safety Critical Threading Applications with. Screw Thread Insert Tapping Options EMUGE (Screw Thread
Build an Aluminum Whistle
Youth Explore Trades Skills Description In this activity plan the students will further develop their machining and metalworking skills by fabricating a two-piece aluminum whistle. The project will cover
Recoil KEYSERT Products
Recoil KEYSERT Products Solid Threaded Inserts,Tooling, & Kits Contents Description, Features, Typical Applications 1 Installation and Removal 1 Thinwall and Heavy Duty Inch Series Carbon Steel Bulk Inserts
Hand Tools.
Hand Tools 115 PLIERS THAT AUTOMATICALLY ADJUST TO ANY SIZE OBJECT THAT S A LOCKJAW REVOLUTION No more manual adjustment Rugged steel construction The Lockjaw Auto-Grip Self-Adjusting Groove Pliers are
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
Made of hardened and tempered tool steel with ground points. es have knurled grip. Set consists of 1 each of 5 punches in plastic pouch. Point Size Length 1/16 3 3040004 5/64 4 3040005 3/32 4 3040006 9/64
Engineering Design Representation. Use of 2D drawing format: Typical Design Annotation. Standardization. Extracted drawings. General dimensions
Engineering Design Representation Some elements of design representation not easily conveyed through model alone. Many are notational in nature. Examples are: Thread specifications Surface finishes Surface
1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe
1. The Lathe 1.1 Introduction Lathe is considered as one of the oldest machine tools and is widely used in industries. It is called as mother of machine tools. It is said that the first screw cutting lathe
Emuge Chip-Breaking Tapping Technology. Only one Tool, for Horizontal and Vertical Apps! NEW Sizes + Coolant-Fed Taps!
TM Emuge Chip-Breaking Tapping Technology. Only one Tool, for Horizontal and Vertical Apps! NEW Sizes + Coolant-Fed Taps! Emuge Chip-Breaking Technology TM Emuge s new Rekord DZBF Series Taps featuring
General Lathe Set Up. Lathe Manual JH compilation
General Lathe Set Up Lathe Manual JH compilation 3.3.06 1 Machine Shop Safety... 2 General Lathe Set-Up... 4 Facing, Turning, and Shouldering:... 4 Three things matter with your tool bit position:... 5
Annual Report for Assessment of Outcomes Machine Manufacturing Technology (MMT) Program
Annual Report for Assessment of Outcomes 2011-2012 Machine Manufacturing Technology (MMT) Program 1. Describe changes that have been implemented towards improving students attainment of outcomes that resulted
Trade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2
Trade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2 Published by SOLAS 2014 Unit 1 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction...
Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
Threading Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Threading Index 148 Threading Taps Carded 149 Threading Taps Bulk Metric 150 Threading Taps Bulk Metric
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The National
CNC Cooltool - Milling Machine
CNC Cooltool - Milling Machine Module 1: Introduction to CNC Machining 1 Prepared By: Tareq Al Sawafta Module Objectives: 1. Define machining. 2. Know the milling machine parts 3. Understand safety rules