CRRFTSHRHI. 0 TON HYDRAULIC LOG SPLITTER Model No Safety Assembly Operation Maintenance Parts IMPORTANT - READ THIS FIRST!!!
|
|
- Catherine Cornelia Collins
- 5 years ago
- Views:
Transcription
1 Owner's Manual CRRFTSHRHI 0 TON HYDRAULIC LOG SPLITTER Model No CAUTION: Before using this product, read this manual and follow all Safety Operating Rules and Instructions. IMPORTANT - READ THIS FIRST!!! For Missing Parts or Assembly Questions Please Call Mon.-Fri. 7am - 5pm CST. FAX or info@agri-fab.com Missing parts will be sent UPS in hours directly to your home. Safety Assembly Operation Maintenance Parts Sears, Roebuck and Co., Hoffman Estates, IL 6079 U.S.A. rs.comcraftsma n FORM NO (05)
2 SAFETY RULES CARTON CONTENTS 3 FULL SIZE HARDWARE CHART ASSEMBLY 5 OPERATION 6 MAINTENANCE 6 REPAIR PARTS LIST 7 PARTS ORDERINGSERVICE 8 LIMITED ONE YEAR WARRANTY ON CRAFTSMAN HYDRAULIC LOG SPLITTER For on year from the date of purchase, when this log splitter is maintained an lubricated according to the operating and maintenance instructions in the owner's manual, Sears will repair any defect in material or workmanship free of charge. If this log splitter is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. This warranty does not cover repairs necessary because of operator negligence or abuse, including the failure to maintain the equipment according to instructions contained in the owner's manual. WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS SERVICE CENTERDEPARTMENT IN THE UNITED STATES. This warranty applies only while product is in the United States. This warranty gives you the specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co. D87 WA. Hoffman Estates, Chicago, IL 6079 SAFETY RULES WARNING: When using hydraulic equipment, basic safety precautions should always be followed to reduce the risk of personal injury and hazards due to over pressurization. READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!. KEEP WORK AREA CLEAN. Cluttered areas invite injuries.. OBSERVE WORK AREA CONDITIONS. Do not use tools in damp, wet, or poorly lit locations. Don't expose to rain. Keep work area well lit. 3. KEEP CHILDREN AWAY. Children must never be allowed in the work area.. STORE IDLE EQUIPMENT. When not in use, log splitter should be stored in a dry location to inhibit rust. 5. DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool's capacities. 6. USE THE RIGHT TOOL FOR THE JOB. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. Do not use a tool for a purpose for which it was not intended. 7. DRESS PROPERLY. Do not wear loose clothing or jewelry as they can be caught in moving parts. 8. USE EYE AND EAR PROTECTION. WearANSl approved goggles when operating log splitter. 9. DO NOT OVERREACH. Keep proper footing and balance at all times. Do not reach over or across running machines 0. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. The handles must be kept clean, dry, and free from oil and grease at all times.. Keep hands, face and body away from log when it is being split.
3 . STAY ALERT. Watch what you are doing, use common sense. Do not operate any tool when you are tired. 3. CHECK DAMAGED PARTS. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician.. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. 5. DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. j3 # PART# DESCRIPTION QTY 6538 HITCH ASSY 650 HANDLE ASSY LOG SPLITTER 6539 AXLE ASSY WHEEL
4 z\ 8\ \ 3 7 I0 5 6 \ # PART# DESCRIPTION QTY # PART # DESCRIPTION QTY BOLT, HEX MIO x BOLT, HEX M8 x NUT, HEX M EWASHER, FLAT WASHER, LOCK WASHER, LOCK NUT, HEX MIO WASHER, FLAT 56 WASHER, FLAT 38 COTTER, HAIRPIN PIN, HITCH COTTER, PIN
5 0 7 5 Figure ASSEMBLY 8!, 3 INSTRUCTIONS Tools Needed: () MIO Open End Wrench () M8 Open End Wrench () Pliers. Verify that all parts and all fasteners (Shown full size) on page are included in the carton and parts bag. Refer to page to identify fasteners used in the following instructions.. With the Log Splitter(3) standing on end, attach the Hitch Assy() using two MIO x 5 Hex Bolts(6), and secure with two 38 Washers(), two 38 Lock Washers(lO), and two MIO Hex Nuts(). Be sure that all bolts are tight. (Figure ) 7 Figure 3. Attach Axle Assy() to the Log Splitter(3) using four M8 x 5 Hex Bolts(7), and secure with four 56 Washers(3), four 56 Lock Washers( ), and four M8 Hex Nuts(8). Be sure that all bolts are tight. (Figure ). Slide the Wheel(5) on to the Axle Assy() with the long hub facing inwards. Slide a Flat Washer(9) onto the outside of the axle. Secure with Cotter Pin(7), bend the ends with a pair of pliers. (Repeat for other wheel) (Figure ) This Log Splitter will attach and tow behind any standard lawn and garden tractor. Use the supplied Hitch Pin, and Haircotter Pin to attach to tractor. In addition there is a hitch located on the rear of the unit, which allows you to tow a cart behind the Log Splitter. As shown during assembly end for easy storage. this unit will stand on its
6 OPERATION HANDLE Gather the logs you wish to split. Make sure the maximum length of each log does not exceed 8" If the log does exceed that measurement, you must cut the log to fit the maximum length of the tool. RELEASE SCREW. 3. Make sure the Piston Rod is fully retracted into the cylinder. If necessary, turn the RELEASE SCREW counterclockwise to releaes the hydraulic pressure. Tighten the RELEASE SCREW. Place the log between the Wedge and Piston Assembly. Rest the log in the metal bracket Cradle.. Wear eye proctection (goggles) when operating the Hydraulic Log Splitter 5. It is recommended you operate the Log Splitter in the following manner. Stand behind the log splitter and grip one Handle in each hand and pump the Handles in a back-and-forth motion with one Handle fully forward and one fully rearward as shown in figure 3., Repeat Step "5" to advance the Piston Rod forward. will push the log against the Wedge and Split it. This Figure When you have split the log, remove the split pieces. Turn the RELEASE SCREW counterclockwise to draw the piston rod back into the cylinder. Tighten the RELEASE SCREW when the piston rod has retracted fully., When you are done, it is recommended you store your Hydraulic Log Splitter with the RELEASE SCREW opened to relieve any hydraulic pressure during non-use. MAINTENANCE After every use, wipe down the Hydraulic Log Splitter to remove any tree sap or dirt left behind. This will extend the life of the tool. Bleeding The Log Splitter. Operate the log splitter to extend the Piston Rod to its maximum length.. Remove the Oil Filling Plug. 3. Turn the Release Screw counterclockwise as fast as possible, the Piston Rod will retract and push air from the cylinder out of the Oil Filling Plug.. Replace the Oil Filling Plug. Repeat steps - as necessary. Adding Oil If you should need to add hydraulic oil to the Log Splitter, remove the Oil Filling Plug, and add oil until the oil is " from top (when laying down). SPECIFICATIONS Maximum Log Length: Ram Stroke: Cradle Dimensions: Base Dimensions: TROUBLE SHOOTING 8" 8-6" 3-3" x " x " -8"L x 8-6"W x 37"H If hydraulic cylinder does not move forward when pumping handles. A. Check to see if Release Screw is tightened in the closed position. B. Check to see if you need to add hydraulic oil. 6
7 REPAIR PARTS FOR HYDRAULIC LOG SPLITTER - MODEL \ \ I 3 \ _,, 6 I I 5 7 # PART # DESCRIPTION QTY # PART # DESCRIPTION QTY R Hitch Assembly Axle Assembly Wheel Hex, Bolt MIO x 30 Hex, Bolt M8 x 5 Hex, Nut M8 Washer, Axle Washer, Lock 38" Washer, Lock 56" Hex, Nut MIO Washer, Flat 56" Washer, Flat 38" Hairpin Cotter Hitch Pin Cotter Pin Spring Operating Lever Grip Ram Assembly U-Clamp Jack Top Plate Cotter Pin, 33 x 3" Spacer Clevis Pin Hex, Nut MIO Frame Handle Clamp Bolt, Hex M5 x 0 Nut, Hex M5
8 _ For repair of major brand appliances in your own home... iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii no matter who made it, no matter who sold it!... SM t 800 MY HOME Anyhme, day or night iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii ( m iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii To bring in products such as vacuums, lawn equipment and electronics ii!i_!i_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii!i for repair, call for the location of your nearest Sears Parts & Repair Center. iiiiiiiii:i!iiiiiiiiiiiii Anytime, dayornight HHHHHHHH_; For the replacement parts, accessories and owner's manuals SM that you need to do-it-yourself, call Sears PartsDirect! PART 0 a.m.= p.m. CST, iiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii ( ) 7daysaweek iiiiiiiii!iiii!ii!ii!ii!ii!ii!i o iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 7a.m.=5p.m. CST, Mon.=Sat. iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiii!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiil Para pedir servicio de reparaci6n a domicilio, Au Canada pourservice en frangais: iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiii'iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii yparaordenarplezasconentregaadomicilio: -877-LE-FOYER sm iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!_ -888-SU-HOGARSM (=877= ) iiiiiiiiiiiiiiii_i (=888-78=67) SEARS Registered Trademark TMTrademark of Sears, Roebuck and Co. Sears, Roebuck and Co Marca Registrada _-MMarca de Fabrica de Sears, Roebuck and Co
10 TON HYDRAULIC LOG SPLITTER Model No
Owner's Manual 0 TON HYDRAULIC LOG SPLITTER Model No..0 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions. IMPORTANT - READ THIS FIRST!!! For Missing
More informationSTOP 36" SPIKE AERATOR. Owner's Manual. Model No Safety Assembly Operation Maintenance Parts
Owner's Manual STOP 36" SPIKE AERATOR Model No. 46.243361 DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-66-576-3 CAUTION: Before using this product, read this manual and follow
More informationATD TON BAR TYPE PULLER/BEARING SEPARATOR SET
ATD-3056 5-TON BAR TYPE PULLER/BEARING SEPARATOR SET Made in China to ATD Inc. Specifications WARNING: When using this tool, basic safety precautions should always be followed to reduce the risk of personal
More informationMODEL W1.0X305A(12 ) MODEL W1.0X610A(24 ) HAND BENDING BRAKE ASSEMBLY&OPERATING INSTRUCTION
MODEL W1.0X305A(12 ) MODEL W1.0X610A(24 ) HAND BENDING BRAKE ASSEMBLY&OPERATING INSTRUCTION 1 SAVE THIS MANUAL You will need the manual for the safety warning and precautions, assembly instructions, operating
More informationUNIVERSAL BENDER Model: SBG-30
I UNIVERSAL BENDER Model: SBG-30. ) OPERATION MANUAL "". Note: This manual is only for your reference. Owing to continuous improvement of the machines, Changes may be made at any time without obligation
More information5" MULTI-JAW BENCH VISE
Operator's Manual 5" MULTI-JAW BENCH VISE Model No. 35.5 8580 CAUTION: Read and follow all Safety Rules and Operating Instructions before First Use of this Product. Safety Assembly Operation Maintenance
More informationBENDER/BRAKE. Model: CB-24 CB-30 OPERATION MANUAL
BENDER/BRAKE Model: CB-24 CB-30 OPERATION MANUAL Save This Manual You will need the manual for the safety warning and precautions, assembly instructions, operating and maintenance procedures, parts list
More information12 Slip Roll. Model Assembly & Operating Instructions
12 Slip Roll Model 36698 Assembly & Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product
More informationROUND BENDING MACHINE Model: RBM30
ROUND BENDING MACHINE Model: RBM30 Operation Manual SAVE THIS MANUAL:You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts
More information8-Ton Manual Splitter OWNER S MANUAL
8-Ton Manual Splitter OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information26 GARDEN CART ASSEMBLY & OPERATING INSTRUCTIONS. Rev 07/03
GARDEN CART 304 ASSEMBLY & OPERATING INSTRUCTIONS 3 Rev 07/03 THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner s record below: Model Serial No. Purchase
More information30 Bending Brake. Model Assembly and Operating Instructions. Distributed exclusively by Harbor Freight Tools.
30 Bending Brake Model 41311 Assembly and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1999 by Harbor Freight Tools. All
More informationITEM Pipe Thread Kit (10 Piece Set - 7 Dies) Assembly and Operating Instructions
ITEM 94098 Pipe Thread Kit (10 Piece Set - 7 Dies) Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 2006 by Harbor Freight Tools. All rights reserved. No portion
More informationSTOP 32" SPIKER SPREADER. Owner's Manual. Model No Safety Assembly Operation Maintenance Parts
Owner's Manual STOP 32" SPIKER SPREADER Model No. 486.24331 DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 CAUTION: Before using this product, read this manual and follow
More informationASSEMBLY AND OPERATING INSTRUCTIONS
Work Bench 91835 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights reserved.
More informationHAND HELD SAW W MILL
HAND HELD SAW W MILL 92247 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All
More information12 SHEAR, PRESS BRAKE &SLIPROLL
12 SHEAR, PRESS BRAKE &SLIPROLL OPERATION MANUAL SPECIFICATION Cpacity: Roller : Die set sizes: Weight: 1mm thick (20gauge), 305 mm (12 ) width 38mm(1-1/2 ) 101.6mm(4 ), 76.2mm(3 ), 50.8mm (x2)[2 9x2]],
More information18 PIECE HOLE SAW SET
18 PIECE HOLE SAW SET 94665 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationROLLER STAND WITH TWO-LEG SUPPORT ASSEMBLY AND OPERATING INSTRUCTIONS
ROLLER STAND WITH TWO-LEG SUPPORT 95621 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2006 by Harbor Freight
More informationModel ADJUSTABLE ROLLER STAND WITH THREE-LEG SUPPORT
ADJUSTABLE ROLLER STAND WITH THREE-LEG SUPPORT Model 46086 ASSEMBLY and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to
More information20 TON HyDRAULIC SHOP PRESS with GRID GUARD 06/2015 INSTRUCTION MANUAL MODEL: KHP-20T-GG COPYRIGHT 2015 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
06/2015 20 TON HyDRAULIC SHOP PRESS with GRID GUARD MODEL: KHP-20T-GG INSTRUCTION MANUAL COPYRIGHT 2015 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. warranty INFORMATION 2-yEAR LIMITED WARRANTY FOR THIS
More informationCRAFTSMAN CONVERTIBLE OWNERS. MANUAL. Model No Safety Assembly Operation Maintenance Parts
OWNERS. MANUAL Model No. 486.4385 CRAFTSMAN UTILITY CONVERTIBLE 0 POLY CART CAUTION: Before using this product,, read this manual and follow all Safety Rules and Operating Instructions.. Safety Assembly
More informationVARIABLE SPEED BECH LATHE
VARIABLE SPEED BECH LATHE Instruction Manual Please read this instruction manual thoroughly and follow all directions carefully. 1 Important Safety Instructions READ ALL INSTRUCTIONS AND WATNINGS BEFORE
More informationCRRFTSMRN 48" DOZER BLADE. Model No Safety Assembly Operation Maintenance Parts CAUTION: IMPORTANT - READ THIS FIRST??!
Owner's Manual CRRFTSMRN 48" DOZER BLADE Model No. 486.244122 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions. Safety Assembly Operation Maintenance
More information" PLUG AERATOR. Model No. Safety Assembly Operation Maintenance Parts. CAUTION: Read Rules for Safe Operation and Instructions Carefully
owner s manual Model No. 45-0383 48" PLUG AERATOR CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts the fastest way to purchase parts www.speedepart.com
More informationDRILL BIT SHARPENER MODEL NO: CBS43 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0710
DRILL BIT SHARPENER MODEL NO: CBS43 PART NO: 6480232 OPERATION & MAINTENANCE INSTRUCTIONS LS0710 INTRODUCTION Thank you for purchasing this CLARKE drill bit sharpener. Before attempting to use this product,
More information8 TONNE LOG SPLITTER
8 TONNE LOG SPLITTER MODEL NO: LOGBUSTER 9 PART NO: 3402043 OPERATION & MAINTENANCE INSTRUCTIONS LS03/16 INTRODUCTION Thank you for purchasing this CLARKE 8 Tonne Log Splitter. Before attempting to use
More informationSTOP. 48" GT DOZER BLADE For Garden Tractors with 23" Tires. Operator's Manual. Model No Safety Assembly Operation Maintenance Parts
Operator's Manual STOP 48" GT DOZER BLADE For Garden Tractors with 23" Tires DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-76-8388 Model No. 486.24414 CAUTION: Before using
More information3 IN 1 HEAVY DUTY TILE CUTTER. Model Visit our website at:
3 IN 1 HEAVY DUTY TILE CUTTER Model 41711 ASSEMBLY Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in
More informationAssembly Instructions
Assembly Instructions 10 CONTRACTOR TABLE SAW Model No. 351.218330 Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. www.sears.com/craftsman 31624.00 Draft (10/08/09) UNPACKING The
More informationATV Disc OWNER S MANUAL
ATV Disc OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationPLATE JOINER 4 INCH. ASSEMBLY and OPERATING INSTRUCTIONS. Distributed Exclusively by Harbor Freight Tools
PLATE JOINER 4 INCH 38437 ASSEMBLY and OPERATING INSTRUCTIONS Distributed Exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1998 by Harbor Freight Tools. All rights
More informationDUST COLLECTOR 70 GALLON, 2 HP
DUST COLLECTOR 70 GALLON, 2 HP Model 45378 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight
More informationINSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER
INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER Part No.: SW1250 PLEASE READ CARE AND SAFETY INSTRUCTIONS BEFORE USE SPECIFICATIONS Part No.: SW1250 Input Voltage: 240V Frequency: 50Hz Rated
More informationWALK-BEHIND SPREADER 50 LB. CAPACITY Model 99623
WALK-BEHIND SPREADER 50 LB. CAPACITY Model 99623 Assembly, Operating, and Maintenance Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product
More informationWISHING WELL LIGHT WOOD
WISHING WELL LIGHT WOOD 43362 ASSEMBLY AND OPERATING INSTRUCTIONS REVISED MANUAL 03e, 09k Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do
More information3/8 Butterfly Air Impact Wrench
3/8 Butterfly Air Impact Wrench 37730 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight
More informationPRODUCT MANUAL 5-IN-1 MITER SAW STATION *SAVE THIS MANUAL FOR FUTURE REFERENCE
PRODUCT MANUAL 5-IN-1 MITER SAW STATION *SAVE THIS MANUAL FOR FUTURE REFERENCE 92778 1 GENERAL SAFETY INFORMATION For your safety, please read these instructions carefully before use and keep them in the
More informationVARIABLE SPEED WOOD LATHE
MODEL MC1100B VARIABLE SPEED WOOD LATHE INSTRUCTION MANUAL Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Version: 2015.02.02
More information12 TON HYDRAULIC SHOP PRESS. Instruction Manual. Please read this instruction manual carefully before use.
12 TON HYDRAULIC SHOP PRESS Instruction Manual Please read this instruction manual carefully before use. IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFETY INSTRUCTIONS AND WARNINGS. USE
More informationDRILL BIT GRINDER MODEL: MR-26A
DRILL BIT GRINDER MODEL: MR-26A OPERATION INSTRUCTION INTRODUCTION SOME SAFETY ISSUES Common sense and caution are factors which can t be built into any product.these factors must be supplied by the operator.
More informationSAVE THIS MANUAL IMPORTANT SAFETY INFORMATION IMPORTANT SAFETY PRECAUTIONS. NOTICE is used to address practices not related to personal injury.
SAVE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s serial number in the back of the manual
More informationTow-Behind Spreader. 175 lb Capacity MODEL NUMBER SP-175TB Rev
Tow-Behind Spreader 175 lb Capacity IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. MODEL NUMBER SP-175TB Made In CHINA 15912 Rev.08-273 LIMITED WARRANTY
More informationOwner s Manual AE PLUG AERATOR MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Made In CHINA REV
MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner s Manual AE-48 48 PLUG AERATOR IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. Made In CHINA
More informationEASY DUMP CART. Sears, Roebuck and Co., Hoffman Estates, IL U.S.A. Visit our Craftsman website:
Operators Manual Cu. Ft, Heaped,000-Pound Capacity Removable Tail Gate EASY DUMP CART Model No. 60.4355 If there are any missing parts please call -800-65-3. All fasteners are readily available through
More informationElectric Chainsaw Sharpener
FPP CHAINSS Electric Chainsaw Sharpener Instruction Manual For your own safety, please ensure you have read these instructions before use and have fully understood all the safety guidelines. Specifications
More information9 QUICK RELEASE WOODWORKING VISE
9 QUICK RELEASE WOODWORKING VISE 94386 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 349 Mission Oaks Blvd., Camarillo, CA
More informationCRAFTSMAN+ 48" DOZER BLADE. Model No Safety Assembly Operation Maintenance Parts CAUTION: IMPORTANT - READ THIS FIRST!!!
Owner's Manual CRAFTSMAN+ 48" DOZER BLADE Model No. 486.244121 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions. Safety Assembly Operation Maintenance
More informationATV CULTIVATOR OWNER S MANUAL
ATV CULTIVATOR OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More informationOperation Manual Model #
3-Point Hitch Vertical/Horizontal Log Splitter Operation Manual Model # 100450 This safety alert symbol identifies important safety messages in this manual. Failure to follow this important safety information
More informationQuick Set Dovetail Jig
Quick Set Dovetail Jig FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CALL OUR CUSTOMER SERVICE HELP LINE : 01509 500359 THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE DESIGN OR SPECIFICATION TO THIS PRODUCT
More informationLOG SPLITTER WITH ROBIN ENGINE
LOG SPLITTER WITH ROBIN ENGINE Models Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. WARNING! IMPORTANT INFORMATION This trailer s Hitch Coupler MUST be
More information3pt 60 Spike Aerator OWNER S MANUAL
3pt 60 Spike Aerator OWNER S MANUAL WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information48in. Plug Aerator. Owner s Manual
48in. Plug Aerator Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationCOMPLEX GRINDER OF MILL& DRILL
COMPLEX GRINDER OF MILL& DRILL MODEL: MR-F6 OPERATING INSTRUCTION PLEASE REMEMBER 1. When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk
More information20 Ton HYDRAULIC SHOP PRESS
20 Ton HYDRAULIC SHOP PRESS Stock Number W41063 OWNER S MANUAL WARNING! It is the owner and/or operators responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product
More informationOwner s Manual LSP38 38 Lawn Sweeper
Owner s Manual LSP38 38 Lawn Sweeper Manual Contents Safety Instructions Assembly Operation Maintenance Parts Warranty 2 4-13 2 11 14-15 16 Your Lawn Sweeper Congratulations on your purchase of a new Precision
More informationowners Model No CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts
owners manual Model No. 45-03022 SLEEVE HITCH CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts the fastest way to purchase parts www.speedepart.com
More informationACREAGE SEEDER / PLANTER OWNER S MANUAL
ACREAGE SEEDER / PLANTER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationLB. POLY PRO DROP SPREADER
owners manual Model No. -02882 17 LB. POLY PRO DROP SPREADER CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts the fastest way to purchase parts
More informationTapping Screw (W/Flange) 46 Cord Armor 47 Tube (D) 48 Cord. 45 Cord Clip. Tapping Screw (W/Flange) 10 Gear Cover Ass'y. 12 Socket (B) Ass'y
W8VB The exploded assembly drawing should be used only for authoized service center. W8VB Item No. Part time 1 Magnetic Hex. Socket 2 Sub Stopper 3 O-Ring (S-16) 4 Locator (A) 5 Lock Sleeve (A) 6 O-Ring
More informationVARIABLE SPEED WOOD LATHE. Model DB900 INSTRUCTION MANUAL
VARIABLE SPEED WOOD LATHE Model DB900 INSTRUCTION MANUAL 1007 TABLE OF CONTENTS SECTION...PAGE Technical data.. 1 General safety rules....1-3 Specific safety rules for wood lathe.....3 Electrical information.4
More informationPLANISHING HAMMER STAND OWNER S MANUAL
PLANISHING HAMMER STAND OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationOPERATION & MAINTENANCE INSTRUCTIONS
FOOT OPERATED 1.5 TONNE LOG SPLITTER MODEL NO: LOGBUSTER 10 PART NO: 3402046 OPERATION & MAINTENANCE INSTRUCTIONS LS0815 INTRODUCTION Thank you for purchasing this CLARKE Foot Operated 1.5 Tonne Log Splitter.
More informationModel Assembly & Operating Instructions
30 SHEAR BRAKE ROLL Model 05907 Assembly & Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the
More information10" Wet Tile Cutting Saw
8035735 10" Wet Tile Cutting Saw Owner s Manual Read and understand all instructions before operation. Keep this manual for future reference pg. 2 SPECIFICATIONS ITEM DESCRIPTION Overall Dimensions (saw
More informationOWNERS MANUAL. Model No LB. POLY PRO SPIKER/SPREADER. CAUTION: Read Rules for Safe Operation and Instructions Carefully
OWNERS MANUAL Model No. -0301 CAUTION: Read Rules for Safe Operation and Instructions Carefully 17 LB. POLY PRO SPIKER/SPREADER Safety Assembly Operation Maintenance Parts PRINTED IN U.S.A. FORM NO. 78
More informationSTOP 42" SNOW BLADE. Operator's Manual. Model No Safety Assembly Operation Maintenance Parts
Operator's Manual STOP 42" SNOW BLADE Model No. 486.244414 DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 CAUTION: Before using this product, read and follow all Safety,
More informationAgri-Fab OWNERS MANUAL. Model No WHEEL CART. CAUTION: Read Rules for Safe Operation and Instructions Carefully
Agri-Fab OWNERS MANUAL Model No. 45-0270 4-WHEEL CART CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts the fastest way to purchase parts www.speedepart.com
More informationMODEL 7000 BEVEL-MILL
MODEL 7000 BEVEL-MILL HECK INDUSTRIES P.O. BOX 425 HARTLAND, MI 48353 TOLL FREE: 800-886-5418 PHONE: 810-632-5400 FAX: 810-632-6640 WWW.HECKIND.NET INSTRUCTION MANUAL Save This Manual You will need the
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL BladeRunner X2 WX572 9 10 8 11 5 7 12 6 20 1 2 4 3 14 13 15 A2 A1 17 18 B2 B1 1 2 1 2 19 B3 3 4 2 C 1 D1 D1 C 2 1 E1 D2 1 2 E2 1 2 F G1 G1 F OFF ON G2 G3 H1 H2 I1 I2 I1 I2 J
More information8 Buffer. Set up and Operating Instructions. (Buffing Wheels Not Included) Distributed exclusively by Harbor Freight Tools.
8 Buffer 40668 Set up and Operating Instructions (Buffing Wheels Not Included) Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationOWNERS MANUAL. Model No UTILITY CART
OWNERS MANUAL Model No. 45-00 UTILITY CART CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts PRINTED IN USA FORM NO. 46274 LOOSE PARTS IN CARTON
More informationGENERAL OPERATIONAL PRECAUTIONS
GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.
More informationSTOP. Operator's Manual. Model No FRONT SCOOP TRACTOR ATTACHMENT. Safety Assembly Operation Maintenance Parts
Operator's Manual STOP Model No. 486.248473 FRONT SCOOP TRACTOR ATTACHMENT DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 CAUTION: Before using this product, read this
More informationTROLLA LEAVY 97 CM Lawn sweeper
TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may
More informationSHRINKER/STRETCHER SET Create radius bends and contours in sheet metal
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationADIRONDACK CHAIR. Model 97458
ADIRONDACK CHAIR Model 97458 ASSEMBLY And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the
More informationShrinker and stretcher
Shrinker and stretcher Model 96465 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein 3491 Mission Oaks Blvd, Camarillo,
More informationInstructions for Stone Cutting Machine
Technical data Kg. Instructions for Stone Cutting Machine SCM600 3HP 2800rpm IP55 SCM800 3HP 2800rpm IP55 SCM1000 2800rpm IP55 SCM1200 2800rpm IP55 L=600 B=85(165) L=800 B=85(175) 500x510 0 or 45 600lt/h
More information48 inch lawn aerator
48 inch lawn aerator 99697 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationDust Collector. Model No: DC2200 (FM300S)
Dust Collector Model No: DC2200 (FM300S) GENERAL SAFETY INSTRUCTIONS Before attempting to operate this machine, it is important that you read, understand and follow these instructions very carefully. They
More information48" Wide Landscape Rake
48" Wide Landscape Rake OWNER S MANUAL WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationLandscape Drag OWNER S MANUAL
Landscape Drag OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More informationGENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING DISC GRINDER
GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.
More informationTow-Behind Spreader 125 lb Capacity
Tow-Behind Spreader 125 lb Capacity IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. Owners Manual #13696 13828 Rev. 07-149 SAFETY PRECAUTIONS 1. Always
More informationOWNERS MANUAL. Model No " SLEEVE HITCH ROCK RAKE. CAUTION: Read Rules for Safe Operation and Instructions Carefully
OWNERS MANUAL Model No. 45-0366 48" SLEEVE HITCH ROCK RAKE CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts the fastest way to purchase parts
More informationAgri-Fab. Model No "ATV" DUMP CART H.D. 17 CU. FT. CAUTION: Read Rules for Safe Operation and Instructions Carefully
Agri-Fab owners manual Model No. 45-02172 190-521-100 "ATV" DUMP CART H.D. 17 CU. FT. CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts the fastest
More informationATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size
Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880
More informationModel 204B-EM Elbow Mandrels Rev TABLE OF CONTENTS
92-0697 Rev. 970131 Model 204B-EM Elbow Mandrels TABLE OF CONTENTS CUSTOMER MESSAGE Inside Front Cover SAFETY PRECAUTIONS 3 GENERAL DESCRIPTION 6 MAINTENANCE 7 OPERATION 8 TROUBLE SHOOTING 11 ACCESSORIES
More informationOPERATOR'S MANUAL 46" SNOW BLADE. Model Numbers OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
OPERATOR'S MANUAL 46" SNOW BLADE Model Numbers 190-833-OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722 PRINTED IN U.S.A. FORM NO.
More informationBRAD NAILER / STAPLER 2-IN-1 KIT
BRAD NAILER / STAPLER 2-IN-1 KIT Model 44923 ASSEMBLY AND OPERATION INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,
More informationTiller Attachment ASSEMBLY AND OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at
Tiller Attachment 9664 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL
More informationMANUAL METAL SHRINKER/STRETCHER
MANUAL METAL SHRINKER/STRETCHER Model 95062 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationSTOP. Operator's Manual FRONT SCOOP TRACTOR ATTACHMENT. Model No Safety Assembly Operation Maintenance Parts
Operator's Manual STOP FRONT SCOOP TRACTOR ATTACHMENT Model No. 486.248474 DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 CAUTION: Before using this product, read this
More informationOWNERS MANUAL. Model No " PLUG AERATOR. CAUTION: Read Rules for Safe Operation and Instructions Carefully
OWNERS MANUAL Model No. 45-0299 48" PLUG AERATOR CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts the fastest way to purchase parts www.speedepart.com
More information125 Lb. Push Spreader
Operating Instructions and Parts Manual Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information,
More informationPlanishing hammer stand For use with SKU Planishing hammer
Planishing hammer stand For use with SKU 94847 Planishing hammer Model 96300 Assembly And Operation Instructions Please Note: Planishing Hammer not included with Stand. Due to continuing improvements,
More informationaccidents which arise due to nonobservance and the safety information herein. SPECIFICATIONS
7 TON ELECTRIC LOG SPLITTER Model: 05620 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.
More informationForm No Assembly & Operating Instructions for: SAFETY PRECAUTIONS
Form No. 0230 Assembly & Operating Instructions for: 833 20300 83 2220 837 0-0008 078 SHOP PRESS Max. Capacity: 2 Ton These instructions are intended for various shop presses. Some models are shipped assembled
More information