TOOLS STRIKING. They meet national and international, American and European, standards.

Transcription

1 STRIKING TOOS URREA striking tools are classified in two categories: direct striking tools (haers and mallets) and those designed to pass on stricken force, or indirect striking tools (chisels, punches and drift pins). Together they are very useful in industrial applications machinery, assembly lines, maintenance and for automotive service engines, bodywork, tires. In addition to the traditional ball pein and claw haers, striking tools also feature haers specially designed to deform, mark or damage stricken objects, and some others are designed so they do not give off sparks, very useful in environments where sparks are a risk factor. The materials used to make these haers are bronze, aluminum bronze, plastic, and rubber. There are haers designed for auto bodywork. They are shaped to fit auto body parts. This category includes air haers used for grinding, cutting and deburring. Struck tools include those used for cutting or breaking materials, to mark, to aid in centering tips, and still others are used to install or remove pins, bolts and rivets. The latter are made of steel, or bronze if it is required that they do not mark or damage the stricken material. This chapter also features punches, used in the perforation or manufacture of washers made from rubber or any other material used in seals. We also present alignment bars, used to align or disassemble machinery elements. URREA striking tools: A great product line with more than 140 types: - ronze and steel haers - all haers - Dead blow haers - Interchangeable face haers - Plastic or rubber mallets - odywork haers - Chisels - Steel or bronze punches - Center punches and drift pins - Hollow punches - Alignment bars - Non-spark haers They are grouped and combined in more than 23 sets in convenient organizers like plastic cases or canvas pouches cases that allow you to easily transport them and keep them organized. The haer heads are made of different materials, such as high-quality bronze, aluminum bronze, die-cast plastic, high-impact rubber, high-resistance micro-alloy steel; they are hot-forged, precision-machined and heat-treated to offer the best combination of strength and striking resistance. All URREA striking tools feature a natural finish with lacquer or paint that prevents corrosion. Striking tools with a phosphatized finish are recoended for use in FOD (Foreign Object Damage) applications, to prevent the shedding of particles. They meet national and international, American and European, standards. The quality image of these products is reinforced by the indelible and permanent mark showing the country of orig This mark meets standards set by the Federal Trade Coission in the United States. The information in this chapter is organized as follows: Technical Standards Quick Selection Guide Detailed product specifications

2 DRIING & SEDGE 43 DEAD OW 4 PASTIC AND RUER MAETS AND 47 A PEIN & CAW HOOW PUNCH CHISES, PUNCHES AND DRIFT PINS AIGNMENT

3 TECHNICA STANDARDS URREA manufactures its tools according to technical product standards. A technical product standard is a document specifying design and manufacturing guidelines to ensure adequate product performance under conditions that meet users requirements. These standards are issued by private or government bodies and associations. The only organization to issue international standards is known as ISO (International Organization for Standardization). It issues the ISO 9000 series, related to quality systems, although it also issues product technical standards. There are various associations that issue or used to issue standards, such as GSA/US FEDERA, ASME, ANSI, ISO; similarly, in Europe there is DIN (Deutsches Institut für Normung e.v.) German Institute for Standardization, which groups together different organizations and coittees dedicated to promoting the standardization and quality of products coercialized in Germany. The hand tool standards, known as Federal (in Mexico) are no longer updated and are being absorbed by ASME. The same is happening to standards issued by ANSI. Nowadays, ASME standards for hand tools are initially reviewed by coittees formed by different tool manufacturers, users, and distributors so they can be approved and issued by ASME. SAE standards (in particular are those applicable to the aerospace industry) are stricter standards, that for the most part, demand smaller tool dimensions and greater resistance. APPICAE STANDARDS FOR: APPICAE STANDARDS FOR: AND MAETS CHISES, DRIFT PINS & PUNCHES 7.47M 7.4M Metal chisels: safety requirements Metal Punches and Drift Pins Safety Requirements 7.3M all Pein Haers: Safety Requirements 7.6 ody Repair Haers: Safety Requirements 7.4 Heavy Striking Tools: Safety Requirements Aluminum - ronze Sand Casting DIN7462: DIN742: DIN130: Wooden haers Wooden handles for eyed wood bits Copper haers DIN13: DIN139: DIN143: DIN14: DIN1: DIN640: DIN641: DIN64: DIN64: DIN70: DIN720: DIN724: DIN72: DIN726: Chisel Handles Firmer chisels with tang Mortise chisel Chisels; technical specifications Chisels; denominations Pin punches Cape chisels DIN643: Flat chisels Grooving chisels Drift punches Hollow punches Center punches Mason chisels Engineers cold chisels and allied tools; technical specifications Pointed chisels GGG-H-6-C Haer (Forged steel head) GGG-C-313C GGG-C-330C GGG--1E GGG-P-31E GGG-P-33A Chisels, hand: cape, diamond point, cold, round nose and side Cutting Chisels. Tools blanks, Caltiking Tools and metal-forming Tools, Power Haer ars, Chisel, Pinch, Pry, Wrecking; digging; tamping, Digging, And Crowbars Punches; Center, coopers, drive pin, Aligning, and prick Punches, Cutting 476

4 TECHNICA STANDARDS STRIKING AND TENSION TESTS FOR AND MAETS ASME 7.3M, 7.6 & 7.4 STANDARDS STRIKING TEST TENSION TEST DEVICE Consists of striking the tested haer or mallet on a steel block a set number of times. The steel block must have a hardness between 92 and HRb. The tool's strike faces must not show any marks, fractures or deformations, or any type of failure. HAMMER AND MAET TENSION TEST RESUTS ower Spec RESUTADOS PRUEA DE TENSIÓN MARTIOS Y MARROS After the striking test, the tool undergoes a tension test where a given force is applied parallel to the handle. The head must withstand the force without coming apart from the tool. RESUTS STRIKING TOOS DESEMPEÑO DE TENSIÓN DE MARTIOS DE OA A PEIN HAMMER TENSION PERFORMANCE bf ,000 1,00 2,000 2,00 3,000 3,00 RESUTS 1324-PN 1332-PN 1340-PN bf=pounds force DESEMPEÑO DE MARROS DE ACERO 1433G bf. 0 0,000 SUPERIOR QUAITY AFFORDAE TOOS 0,000 10,000 0,000 20,0000 ASME/ANSI -PUG ASME/ANSI -INCH 477

5 TECHNICA STANDARDS HAMMER AND MAET HARDNESS TESTS ASTME 1 STANDARD A Rockwell hardness tester is used for this test. A load perpendicular to the testing surface is applied and the result directly depends on the diamond tip's penetration into the tested element (According to ASTME 1). HARDNESS TEST PRESS HARDNESS READINGS' STATISTICA TEST PERFORMED ON URREA ower Spec RESUTS Upper Spec Op CPU CP Opk Opm 4 SHORT-TERM CAPAIITY * Targ US S k n * Mean Mean+3s Mean-3s s %>US Exp Obs %<S Exp Obs FEXION TESTS FOR AND MAETS ASME 7.3M, 7.6 & 7.4 STANDARDS PPM>US Exp Obs PPM<S Exp Obs In this test the tool's head is firmly fastened. The other end is suspended and is positioned perpendicular to the grip. In the testing device, one of the strike faces will be positioned face down and a load will be applied on the handle's end, where users normally hold it, about " from the head's farthest point. The haer or mallet must resist this test without breaking or fracturing. FEXION TEST 47

6 SPECIFICATIONS AND STANDARDS HARDNESS TEST FOR CHISES, PUNCHES, ASTME 1 STANDARD This hardness test must be done on the striking area as well as on the cutting end. The test is performed using a Rockwell hardness tester, which features a diamond tip upon which a load perpendicular to the testing surface is applied. The result directly depends on the diamond tip's penetration into the tested element (According to ASTME 1). The hardness on the cutting end must be measured at no less than " from the edge. HARDNESS TEST PRESS HARDNESS READINGS' STATISTICA TESTS PERFORMED ON URREA CHISES ower Spec RESUTS Upper Spec IMPACT TEST FOR CHISES Op CPU CP Opk Opm * Targ US S k n SHORT-TERM CAPAIITY * Mean Mean+3s Mean-3s s %>US Exp Obs %<S Exp Obs PPM>US Exp Obs PPM<S Exp Obs IMPACT TEST FOR DRIFT PINS STRIKING TOOS IMPACT TEST The chisel must be vertically IMPACT TEST mounted on a " diameter bar. The chisel's cutting line must form a 90 angle with the shaft's centering line. The bar must rest on a steel block weighing at least 0 lb (91 kg) and have a 3 HRc. The chisel is struck by a load according to its size. The load must be a piece of steel with a HRc hardness. After repeating the impact times, no fracturing or chipping should be visible, or any other type of damage, or failure. The chisel must be vertically mounted on a " thick steel plate with 4-0 HRc hardness. The plate must rest on a steel block at least 0 lb (91 kg) in weight and have a 3 HRc minimum hardness. The drift pin is struck by a load according to its size. The load must be a piece of steel with a HRc hardness. After repeating the impact times, no fracturing or chipping should be visible, or any other any other type of damage, or failure. SUPERIOR QUAITY AFFORDAE TOOS 479

7 QUICK SEECTION GUIDE FOR STRIKING TOOS STRIKING TOOS DRIING & SEDGE RONZE SET DEAD OW RUER INTERCH. FACE A PEIN ODYWORK PASTIC RUER OZ WEIGHT FV 1432FV GFV 1434GFV 143GFV 1436GFV 1437GFV 143GFV 1439GFV 1440GFV G 1434G 143G 1436G 1437G 143G 1439G 1440G D 1436D 1439D 46 SF10HK SF PD 1326D PD DX 1332FV 1332P 1332E 1332PN 1336D 1430D 1340FV 1340P 1340PN 1344D 134D 1432D 134P 134PN FV 13FV 130P 13P 130PN 13PN FV 13P 13PN FV 1324P 1324E 1324PN 490 For your convenience the products in this catalog can be found on our Website at www. urreaprofessionaltools.com, a quick and free service available 24 hours a day. Thanks to its specialized search engine you can quickly and easily find the products you are looking for. VISIT US ONINE (00)

8 QUICK SEECTION GUIDE FOR STRIKING TOOS STRUCK TOOS PUNCHES CHISES CENTERING DRIING 90 O 0 O 3/ x 1/ x 3/32 / / x 1/ / x /32 3/" 3/ x 3/ 3/ x /32 7/ 7/ x 7/32 x x / x 7 / 3/4 3/4 x 3/4 x 7/ x 7/ x 1 x 1 x / 41-3/ / 44-3/ 41-7/ 44-7/ / 44-/ X1/ 47-X3/32 47-/X1/ 47-/X/32 4-3/X3/ 47-3/X3/ 4-3/X/32 4-7/X7/ /X7/32 4-X 4-X/ X THE EST WARRANTY / 96-3/ 96-/ 96-3/4 0-/ 96-7/ 0-7/ / 6A-3/ 0-6A- 76-6A-/ 0-3/ 6A-3/ 6A-7/ 6A- 76-6A-/ 6A-3/4X 6A-3/4X 6A-7/X 6A-7/X 6A-1X 6A-1X 76-/ 72-/ 76-3/ 72-3/ 76-/ URREA tools are designed to offer precision, quality and endurance. STRIKING TOOS They are made by highly qualified employees. They are marked with the country of origin, following the strictest quality standards. HAND TOOS PNEUMATIC TOOS (00) SUPERIOR QUAITY AFFORDAE TOOS 41

9 QUICK SEECTION GUIDE FOR STRUCK TOOS STRUCK TOO NO.46 NO.6 NO. NO.2 6D 96A 6 47A 0A NO.4 NO.3 4A 99 41A 6C 6A PIECES PIECES PIECES PIECES PIECES 7 PIECES 7 PIECES 7 PIECES 6 PIECES PIECES PIECES PIECES PIECES PIECES PIECES PIECES 3 PIECES RONZE PUNCH CHISES CENTER PUNCHES PIN PUNCHES ONG GUIDE PUNCHES SHORT GUIDE PUNCHES A-3/ 6A- 6A-/ 6A-3/ 6A-7/ 6A- 6A-/ 6A-3/4X 6A-7/X 6A-1X / 41-3/ / 44-/ 44-3/ 4-3/X/32 4-3/X3/ 4-7/X7/32 4-X 4-X/ 47-X1/ 47-X3/32 47-/X1/ 47-/X/ /X3/ 47-7/X7/32 47-X / 96-3/ 96-7/ / 96-3/4 0-3/ 0-0-/ 0-3/ 0-7/ 0-3/4 3/ / 3/ 7/ / 3/4 x 7/ x 1 x / 3/ / / 3/ 3/ x /32 3/ x 3/ 7/ x 7/32 x x / x 1/ x 3/32 / x 1/ / x /32 3/ x 3/ 7/ x 7/32 x / 3/ 7/ / 3/4 3/ / 3/ 7/

10 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES AIGNMENT ronze head does not deform stricken materials. RONZE Impact-resistant oak handle. Fiberglass ergonomic handle 1432FV 1432 RONZE HAMMER WITH FIERGASS HANDE FACE WEIGHT RONZE HAMMER WITH WOODEN HANDE FACE WEIGHT 1430FV 1432FV 1 3/ / / STANDARD: FEDERA GGG-H-33a ronze haers do not give off sparks when striking other metals, making them a very safe tool for use in flaable environments or for precision work such as bushings, transmissions, etc / / / STANDARDS: FEDERA GGG-H-33a STRIKING TOOS SUPERIOR QUAITY AFFORDAE TOOS 43

11 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES AIGNMENT STEE OCTAGONA SEDGE Epoxy resin connection guarantees secure hafting. Carbon steel forged head, quenched and tempered. 0 HRc hardness. eveled and polished faces. AMERICAN HICKORY 1433GFV 1434GFV 143GFV 1436GFV 1437GFV 143GFV 1439GFV 1440GFV OCTAGONA SEDGE HAMMER WITH FIERGASS HANDE WEIGHT FACE 1 / 1 3/4 2 1/ 2 3/ 2 3/ / 2 1/ GFV 4 1/ / / 7 11/ 7/ HANDE WEIGHT STANDARDS: FEDERA GGG-H-6c, ASME EG 1434EG 143EG ENGINEER SEDGE HAMMER WITH AMERICAN HICKORY " HANDE WEIGHT FACE 1 / 1 3/4 2 1/ 1433EG / / HANDE WEIGHT STANDARDS: ASME 7.4, FEDERA GGG-H G 1437G 143G 1439G 1440G STEE OCTAGONA SEDGE HAMMER, AMERICAN HICKORY 36" HANDE WEIGHT 6 FACE 1436G 2 3/ 6 2 3/ / 6 2 1/ / / 7/ HANDE WEIGHT STANDARDS: ASME 7.4, FEDERA GGG-H-6 AMERICAN Standard eye HICKORY 143G 1433G Includes wood and metal wedges 1433G 1434G 143G STEE OCTAGONA SEDGE HAMMER, AMERICAN HICKORY " HANDE WEIGHT G FACE 1 / 1 3/4 2 1/ / / HANDE WEIGHT STANDARDS: ASME 7.4, FEDERA GGG-H-6 SPARE HANDES FOR AMERICAN HICKORY SEDGE CA7UH CAUH CAUH Double wedge hafting, with wood and metal. USED IN: Construction Industrial Maintenance Railroad Industry Mining NOTE: These are not non-spark sledge haers. Not recoended in flaable, volatile, or corrosive environments. 44

12 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES AIGNMENT INTERCHANGEAE FACE DEAD OW These haers have two main characteristics. First, any deformations deriving from the strike action occur on the haer faces and not on the stricken object. Second, the haer's hollow head is filled with steel shot. This shot works as a strike vibration dissipater, preventing the haer from bouncing with each blow, thus creating a dead blow. SF10HK Steel shot in side head. The dead blow haer with interchangeable faces is mainly used in the assembly of machinery parts, where it is important that surfaces stricken do not get damaged. Fiberglass handle with rubber grip minimizes the vibration felt on the hand. SF10HK 1 OZ. WITH INTERCHANGEAE FACES oz. SF1SS SF1ST SF1M SF1T PIECE SET SF1MH SF1H SF1XH SFS CONTENTS Face assortment: Super soft (gray) Hard (black) Soft (brown) Medium (red) Rugged use (green) Medium rough (beige) SF Strike deformations occur on the faces, not on the object. 9 interchangeable faces, each with a different Shore or Rockwell hardness, measurement used to assign a hardness value on soft materials such as plastic, rubber, non-tempered steel, etc. SF1SS SF1ST SF1M SF1T SF1MH SF1H SF1XH SFS SF INTERCHANGEAE FACES FOR 1 DEAD OW STRIKE FORCE SUPER SOFT SOFT MEDIUM RUGGED MEDIUM HARD HARD EXTRA HARD SOID SOID FACE COOR IGHT GRAY ROWN RED GREEN EIGE ACK YEOW STEE FACE RONZE FACE HARDNESS SHORE A INSTANTANEOUS, 4- SHORE A 30 SEC, 4- SHORE A 30 SEC, 9-72 SHORE A 30 SEC, 9-73 SHORE D 30 SEC, 40-4 SHORE D 30 SEC, 49-6 SHORE D 30 SEC, HRC HR MATERIA PVC PVC PVC PVC POYURETHANE POYURETHANE POYURETHANE STEE RONZE Includes faces Extra hard (yellow) Steel Haer 1 Plastic case 1430DX oz SF10 OZ. DEAD OW HAMMER (DOES NOT INCUDE INTERCHANGEAE FACES) 1 oz SF FIXED FACE DEAD OW HAMMER 2 Indestructable fiber glass handle 0. HIGH-IMPACT, FIXED FACE DEAD OW HAMMER Indestructible non-slip fiberglass handle with Super Grip. Reinforced faces. 7 Non-slip, shock absorbtion handle 13 3/ STRIKING TOOS SUPERIOR QUAITY AFFORDAE TOOS 4

13 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES AIGNMENT DEAD OW IMPACT AND DEAD OW SEDGE Fiber glass handle with rubber grip minimizes hand vibration Steel shot inside head dissipates vibration 1430D 1432D 2 3 HEAVY-DUTY HIGH-IMPACT HAMMER oz /4 1432D / / / / Heads are partially filled with steel shot The high-impact dead blow haer, in addition to featuring a head filled with steel shot that makes it weigh more, also has a greater contact area, very useful in the assembly of machinery parts requiring great force. 1434PD 143PD 1 1. oz. 24 HIGH-IMPACT HAMMER 1 1/ / PD 1/ / The body is composed of a steel body with two fixed faces made of cellulose acetate, designed for use on metals and other materials susceptible to strike marks or deformations. The deformation is absorbed and occurs on the face, not on the stricken object. 1439D 1326D DEAD OW IMPACT SEDGE DEAD OW A PEIN FACE 143D 1436D 1439D 2 9/ 6 2 3/ / 0 7/ 7 3/ / Made of one piece from high-impact polyurethane, resistant to chemicals. Head filled with steel shot is heavier. Does not bounce or give off sparks D Does not damage any surfaces. More resistant to cuts, indentations, and abrasion than rubber haers. Flat faces deliver better strikes. Non-slip handle. Handle's bottom features a wide end cap to prevent the tool from slipping off hands. Ideal for any type of application. 1326D 1336D 1344D 134D oz ody made of high-impact polyurethane, resistant to chemicals. Face and ball made of steel alloy. eveled strike face does not produce shrapnel. all machined with accurate radii to deliver better impacts. Non-slip handle. Handle's bottom features wide end cap to prevent tool from slipping off hands. 46

14 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES AIGNMENT RUER MAETS Mallets with rubber heads are ideal for mechanics, bodyworkers, brass workers and carpenters. Very useful for striking large pieces requiring special care. RUER MAET Cylindrical head delivers greater impact area oz / /. 2 / / / / STANDARDS: FEDERA GGG-H-33a Head made of neoprene rubber that delivers strong blows without damaging the stricken object. 136 PASTIC OR RUER FACE Fixed plastic face haers are used for striking soft materials that do not require a lot of force. Resistant plastic faces prevent haer bouncing. 133FV FACT SHEET FOR 133FV WITH PASTIC FACES FEDERA STANDARD GGG-H-33a CHARACTERISTICS 133 HAMMER WITH FIXED PASTIC FACES FIERGASS HANDE 1 / SHORE HARDNESS A 7 3 1/32.1 STRIKE ower vibration through hand and arm. TYPE Fiberglass handle, rubber covered STANDARDS: FEDERA GGG-H-33a OZ.. 2 PASTIC FACES Resistant plastic faces prevent haer from bouncing / FACT SHEET FOR 133 WITH PASTIC FACES FEDERA STANDARD GGG-H-33a CHARACTERISTICS 133 SHORE HARDNESS A 7 STRIKE 1364XS Extra soft gray face Plastic face with 60 Shore hardness for soft strikes. 133 HAMMER WITH FIXED PASTIC FACES 3 1/32.1 TYPE STANDARDS: FEDERA GGG-H-33a OZ.. 2 PASTIC FACES T Rugged use beige face Center cast in Zamak for solid impacts XS 1364T Compact oak handle offers excellent impact resistance Oak handle provides excellent impact resistance. HAMMER WITH INTERCHANGEAE RUER FACES / INTERCHANGEAE FACES FOR SF10 AND 1364 STRIKE TYPE.7 EXTRA SOFT RUGGED USE Plastic face with 9 Shore hardness for solid strikes. SHORE HARDNESS STANDARD: FEDERA GGG-H-33a FACE COOR DARK GRAY EIGE STANDARD: FEDERA GGG-H-33b STRIKING TOOS 1 SUPERIOR QUAITY AFFORDAE TOOS 47

15 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN A PEIN HOE PUNCH CHISES, PUNCHES AIGNMENT all pein haers allow you to work on rivets and metal surfaces. A PEIN Forged and tempered steel alloy head, polished and varnished. AMERICAN HICKORY Epoxy resin connection guarantees secure hafting. 1332FVS Fiberglass handle with rubber grip minimizes the vibration felt on the hand. 1340FV American Hickory handle, polished and lacquered. 1332P ACK A PEIN HAMMER WITH FIERGASS HANDE POISHED A PEIN WITH FIERGASS HANDE POISHED A PEIN WITH AMERICAN HICKORY HANDE TENSION RESISTANCE ASME 7.3M -INCH TENSION RESISTANCE ASME 7.3M -INCH TENSION RESISTANCE ASME 7.3M -INCH 1332FVS 1324FVS oz / 7 7/ lbf STANDARDS: FEDERA: GGG-H-6C, ASME 7.3, NMX-O-3 130FV 13FV 13FV 1324FV 1332FV 1340FV oz / lbf STANDARDS: FEDERA:GGG-H-6C, ASME 7.3M NMX-O-3 130P 13P 13P 1324P 1332P 1340P 134P oz / lbf STANDARDS: FEDERA:GGG-H-6C, ASME 7.3, NMX-O-3 130FV 13FV 13FV 1324FV 1332FV 1340FV A PEIN FACT SHEET ASME 7.3M STANDARD HARDNESS O RC TENSION F FEXION F STRIKE 130P 13P 13P 1324P 1332P 1340P 134P A PEIN FACT SHEET ASME 7.3M STANDARD HARDNESS O RC TENSION F FEXION F STRIKE 4

16 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN A PEIN HOE PUNCH CHISES, PUNCHES AIGNMENT Phosphatized head prevents corrosion. Double heat-treated forged steel head. Hafted with metal and wood wedges to lock head and handle together. Forged steel alloy head, quenched and tempered, blued finish. 49 to HRc hardness on striking faces. Tempered eye. Includes wood and metal wedges. AMERICAN American Hickory handle. HICKORY 130PN 13PN 13PN 1324PN 1332PN 1340PN 134PN 130PN 13PN 13PN 1324PN 1332PN 1340PN 134PN oz A PEIN FACT SHEET ASME 7.3M STANDARD HARDNESS O RC 1324PN ACK A PEIN HAMMER 3/ TENSION F Oak handle offers excellent impact resistance FEXION F TENSION RESISTANCE ASME 7.3M -INCH lbf STANDARDS: FEDERA:GGG-H-6C, ASME 7.3, NMX-O-3 STRIKE 1324E 1332E 1324E 1332E oz CA6U 1332E A PEIN FACT SHEET ASME 7.3M STANDARD HARDNESS O RC ACK A PEIN HAMMER WITH ERGONOMIC HANDE TENSION F Ergonomic oak handle prevents slippage FEXION F TENSION RESISTANCE ASME 7.3M -INCH lbf STANDARDS: FEDERA: GGG-H-6C, ASME 7.3, NMX-O-3 STRIKE SPARE OAK ERGONOMIC HANDE 1324E AND 1332E CA1UH CA2UH CA3UH CA4UH CA3UH SPARE AMERICAN HICKORY HANDE FOR A PEIN Oak handle oz. & oz. 24 & 32 oz. 40 & 4 oz. Includes wood and metal wedges. STRIKING TOOS & 32 oz. CA6U SUPERIOR QUAITY AFFORDAE TOOS 49

17 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN A PEIN HOE PUNCH CHISES, PUNCHES AIGNMENT ODYWORK odywork haers are used to repair car dents. Their heads feature radii and geometries that make the heads fit very well in the various shapes found in bodywork. Impact-resistant oak handle ODYWORK HAMMER WITH TWO FACES Also called a dinging or engravers haer FACE FACE / / STANDARDS: FEDERA GGG-H-A, ASME 7.6 odywork haer with two round, flat faces. Features double heat-treated, steel alloy forged head. This haer is ideal for work on dents, wrinkles, undulations, and other bodywork damage ODYWORK FACT SHEET ASME 7.6 STANDARD HARDNESS O RC TENSION F FEXION F STRIKE CHARACTERISTICS OZ These are also called finishing haers Also called a dinging haer FAT TIP AND ROUND FACE HAMMER 1424 SQUARE AND ROUND FACE HAMMER 142 UNT POINT AND ROUND FACE HAMMER 1 3/ STANDARDS: FEDERA GGG-H-A, ASME 7.6 Haer with round face and flat tip for finishes on edges and molds STANDARDS: FEDERA GGG-H-A, ASME 7.6 Square and round face haer, quenched and tempered with 43-4 RC. Smooths damaged metallic surfaces, especially corner areas / STANDARDS: FEDERA GGG-H-A, ASME 7.6 lunt point and round face haer for smoothing out dents in metal sheets and deep areas. 490

18 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH HOE PUNCH CHISES, PUNCHES AIGNMENT HOOW PUNCH Hollow punch sets are used to cut out round sections on different materials. Their applications are very diverse. For example, they can be used to make seals for automobile crankcases, for hydraulic or toilet installations, etc. The materials it can cut are polyurethane foam, rubber, cardboard, leather, and joint materials / TO 2 IN PASTIC CASE DESCRIPTION 1/, 3/,, /, 3/, 7/,, 9/, /, 3/4, 7/, 1, 1 1/, 1 1/, 1 3/, 1, 1 /, 1 3/ 1 7/, 1, 1 /, 1 11/, 1 3/4, 1 7/, 2 27-PIECE SET ACCESSORIES Handle adapter Plastic case It is used to cut out round shapes and rings to make foam, cardboard, leather, rubber, fiber, plastic and lead seals, among other possible materials They are manufactured with high-carbon steel, with a 3 to 66 RC hardness. Handles made of impact-resistant steel alloy. Polypropylene case. This system was made so 2 or more hollow punches can be used at the same time. STRIKING TOOS PIECE SET 1/ TO 1 3/ IN PASTIC CASE DESCRIPTION 1/, 3/,, /, 3/, 7/,, 9/, /, 3/4, 7/, 1, 1 1/, 1 1/, 1 3/ ACCESSORIES Handle Plastic case PIECE SET 1/ TO 3/4 IN PASTIC CASE DESCRIPTION 1/, 3/,, /, 3/ 7/,, 9/, /, 3/4 ACCESSORIES Handle Plastic case M 49900M -PIECE SET 3 TO 30 MM IN PASTIC CASE DESCRIPTION 3, 4, 6,,,, 14,, 1,, 22, 24, 26, 2, 30. ACCESSORIES Handle Plastic case SUPERIOR QUAITY AFFORDAE TOOS 491

19 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH HOE PUNCH CHISES, PUNCHES CHISES, PUNCHES AIGNMENT SHEET META HOE PUNCH 0900 STRIKING PUNCH Ø / 3/ FOR SHEET META, / TO 1 1/14 IN PASTIC CASE OPENING MATRIX 9/ 19/32 1/64 1 1/32 Ø / 2/64 1/32 SCREWS THREAD /4 7-PIECE SET OPENING WEIGHT /9 14/ Saves time in perforation, serration, filing and manual adjustments. Make burr-free, clean holes to install conduit pipes, controls, instruments and for sheet metal boxes. Easy to use tools. Can be operated with a coon wrench. Assortment of hole punches for different hole sizes. RONZE DRIFT PUNCHES Drift punches are used to install or remove pins and rivets. Their length depends on the job at hand. Straight punches can also be used to align holes when assembling parts. Does not strip or deform. RONZE DRIFT PINS Designed to prevent any damage of the stricken object PIECE SET Knurled grasping area for a better grip. End designed to withstand strikes. DESCRIPTION ACCESSORIES 3/,, 3/4 POUCH RONZE DRIFT PUNCHES TIP SHAFT / / For medium steel and aluminum sheet metal, gauge (3. )

20 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES CHISES, PUNCHES AIGNMENT COMINATION OF CHISES, PUNCHES AND DRIFT PINS Combination sets make an expert's work easier. Manufactured with tempered, micro-alloy steel. Hexagonal body design. NO PIECE SET DRIFT PINS, PUNCHES, AND CHISES 41-3/ / 47-X3/32 47-/X1/ 47-/X/ /X3/ 47-7/X7/32 47-X 0-0-/ 0-3/ 0-7/ 0-6A-3/ 6A- 6A-/ 6A-7/ 6A- 6A-/ 6A-3/4X 6A-7/X 6A-1X NO.46 NO.6 NO. 3/ x 1/ x 3/ / x 7/64 x 3/32 / x 1/ / x /32 3/ x 3/ 7/ x 7/32 x x 3/32 / x 1/ 3/ x 3/ 7/ x 7/32 x x 3/ x / x / 7/ x 7/ x / x / 3/4 x 3/4 7/ x 1 1 x 1 3/ 9. x x x 2. x x x x x.6.7 x x x x x.6.7 x x 4. x 7.9 x x x x x x x 30.2 NO.6 DRIFT PINS AND PUNCHES 47-X3/32 47-/X1/ 47-/X/ /X3/ 47-X / 0-3/ 0-7/ / / / E14 x 3/32 / x 1/ / x /32 3/ x 3/ x x 1/ x 3/32 / x 1/ 3/ x 3/ 7/ x 7/32 x 3/ x 3/ x 3/ x 1/ x 3/ 3/ x /32 -PIECE SET x x x x 4..7 x x 1.6 x x x x.6.7 x 9. x 4..7 x 9. x x x 4.0 NO. -PIECE SET DRIFT PINS, PUNCHES AND CHISES 47-X3/32 47-/X1/ 47-/X/ /X3/ 0-/ 0-3/ 96-3/4 41-3/ 6A-3/ 6A-/ 6A-7/ 6A- E19 x 3/32 / x 1/ / x /32 3/ x 3/ / x 1/ 3/ x 3/ 3/4 x 3/ 3/ x 1/ x 3/ / x / 7/ x 7/ x x x x x x x x x 3.2 x x x x.7 STRIKING TOOS 96-/ 96-3/ 96- E / x 1/ 3/ x 3/ x 7.9 x x 4..7 x SUPERIOR QUAITY AFFORDAE TOOS 493

21 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES CHISES, PUNCHES AIGNMENT COMINATION OF CHISES, PUNCHES, DRIFT AND PINS NO.2 NO.4 NO.3 NO.2 -PIECE SET NO.4 -PIECE SET NO.3 -PIECE SET CHISES, DRIFT PINS AND PUNCHES CHISES, DRIFT PINS AND PUNCHES CHISES, DRIFT PINS AND PUNCHES 41-3/ 3/ x 1/ 9. x /X/32 / x / x / 3/ x 1/ 9. x X3/32 47-/X1/ 47-3/X3/ 0-3/ 0-/ 0-3/ x 3/32 / x 1/ 3/ x 3/ x 1/ / x 1/ 3/ x 3/ x x x 4. x x x / 41-3/ 6A-7/ 6A- E1 3/ x 3/ 3/ x 1/ 7/ x 7/ x 9. x x x x.7 47-/X1/ 47-3/X3/ 0-/ 6A- E300 / x 1/ 3/ x 3/ / x 1/ x 7.9 x x x x.7 6A- 6A-3/ 6A-7/ x 3/ x 3/ 7/ x 7/ x 9. x x 11.1 E

22 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES CHISES, PUNCHES AIGNMENT PUNCHES AND DRIFT PINS Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling parts. Straight tip, ideal for installing or removing guide bushings when die-cutting. Made with micro-alloy steel for greater resistance. The tool's butt end is designed to withstand strikes. 96A 96A ONG DRIFT PUNCHES 7-PIECE SET Tapered tip, ideal for installing or removing pins and center guides in deep holes / 96-3/ 96-7/ / 96-3/4 E303 x 3/32 / x 1/ 3/ x 3/ 7/ x 7/32 x / x / 3/4 x 3/ x x x x.6.7 x 1.9 x x 9. STRIKING TOOS 47A 47A 7-PIECE SET 0A 0A 6-PIECE SET 4A 4A -PIECE SET STRAIGHT PIN PUNCHES SHORT DRIFT PUNCHES EXTRA ONG PIN PUNCHES 47-X1/ 47-X3/32 47-/X1/ 47-/X/ /X3/ 47-7/X7/32 47-X x 1/ x 3/32 / x 1/ / x /32 3/ x 3/ 7/ x 7/32 x x 1.6 x x x x x.6.7 x 0-3/ 0-0-/ 0-3/ 0-7/ 0- E1 x 1/ x 3/32 / x 1/ 3/ x 3/ 7/ x 7/32 x x 1.6 x x x x.6.7 x 4-3/X/32 4-3/X3/ 4-7/X7/32 4-X 4-X/ E17 3/ x /32 3/ x 3/ 7/ x 7/32 x x / 9. x x x.6.7 x.7 x 7.9 E307 SUPERIOR QUAITY AFFORDAE TOOS 49

23 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES CHISES, PUNCHES AIGNMENT 99 -PIECE SET ONG DRIFT PUNCHES 96-/ 96-3/ 96-7/ / E17 / x 1/ 3/ x 3/ 7/ x 7/32 x / x / 7.9 x x x.6.7 x 1.9 x X1/ 47-X3/32 47-/X1/ 47-/X/ /X3/ 47-7/X7/32 47-X / / 3/ 7/ A STRAIGHT PIN PUNCHES / 3/32 1/ /32 3/ 7/ x / 4 3/4 / 6 1/ 6 6 3/ STANDARDS: FEDERA GGG-P-31F ASME 7.4M 47-X1/ 47-X 3/32 47-/X1/ 47-/X/ /X 3/ 47-7/X7/32 47-X STRAIGHT PIN PUNCHES FACT SHEET CUT AREA HARDNESS O RC ANSI 9.2 STRIKING AREA HARDNESS O RC IMPACT HEIGHT/INCH IMPACT WEIGHT/ To install or remove guide bushings when die-cutting. To install or remove pins and center guides, and in the alignment of pins that center two or more pieces. The tool's butt end is designed to withstand strikes. 4-3/ x 3/ EXTRA ONG STRAIGHT PIN PUNCHES A 4-3/X/32 4-3/X3/ 4-7/X7/32 4-X 4-X/ 3/ 3/ 7/ /32 3/ 7/32 / STANDARDS: FEDERA GGG-P-31F ASME 7.4M 496

24 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES CHISES, PUNCHES AIGNMENT PUNCHES AND DRIFT PINS A 0-/ 96- SHORT TAPERED DRIFT PUNCHES A ONG TAPERED DRIFT PUNCHES STRIKING TOOS 0-3/ 0-0-/ 0-3/ 0-7/ 0- / 3/ 7/ / 3/32 1/ 3/ 7/ / 4 / 1/ / STANDARDS: FEDERA GGG-P-31F ASME 7.4M / 96-3/ 96-7/ / 96-3/4 / 3/ 7/ / 3/ /32 1/ 3/ 7/32 / 3/ STANDARDS: FEDERA GGG-P-31F ASME 7.4M SHORT TAPERED DRIFT PUNCHES FACT SHEET ASME 7.4M ONG TAPERED DRIFT PUNCHES FACT SHEET ASME 7.4M CUT AREA HARDNESS O RC STRIKING AREA HARDNESS O RC IMPACT HEIGHT/INCH IMPACT WEIGHT/ CUT AREA HARDNESS O RC STRIKING AREA HARDNESS O RC IMPACT HEIGHT/INCH IMPACT WEIGHT/ 0-3/ 0-0-/ 0-3/ 0-7/ 0- SE SE SE SE / 96-3/ 96-7/ / 96-3/4 SE SE SE SE SE SE SE SE To install or remove guide bushings when die-cutting. To install or remove pins and center guides in deep holes, and in the alignment of pins that center two or more pieces. The tool's butt end is designed to with stand strikes. SUPERIOR QUAITY AFFORDAE TOOS 497

25 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES CHISES, PUNCHES AIGNMENT CENTER AND PRICK PUNCHES 0 center punches are used to mark pieces in manufacturing or assembly. 90 prick punches are used to center the bore point and prevent tips from slipping off FOR CENTERING OR MARKING 0 0 FOR PRICKING OR DRIING The tool's butt end is designed to withstand strikes / CENTER PUNCHES PRICK PUNCHES A A 41A / 41-3/ 41-7/ / / 3/ 7/ / /64 3/32 1/ /32 3/ / / 4 7/ / STANDARDS: FEDERA GGG-P-31F, ASME 7.4M / 44-3/ 44-7/ / / 3/ 7/" " /" /32 7/64 3/ 7/32" " 3/" /4 /" 6" 6 7/" STANDARDS: FEDERA GGG-P-31F, ASME 7.4M 41A -PIECE SET CENTER PUNCHES FACT SHEET ANSI 9.1 PRICK PUNCHES FACT SHEET ANSI 9.1 PRICK AND DRI PUNCHES / 41-3/ / E1 x /64 / x 3/32 3/ x 1/ x 3/ / x / x x x x x / 41-3/ 41-7/ / CUT AREA HARDNESS O RC STRIKING AREA HARDNESS O RC 9 max. 9 max. 9 max. 9 max. 9 max. 9 max. IMPACT HEIGHT/IN IMPACT WEIGHT/ For tracing on metal plates or sheet metal; to mark or punch guide holes; to place self-threading screws / 44-3/ 44-7/ / CUT AREA HARDNESS O RC STRIKING AREA HARDNESS O RC 9 max. 9 max. 9 max. 9 max. 9 max. 9 max. IMPACT HEIGHT/IN IMPACT WEIGHT/ Useful for initiating holes. The tool's butt end is designed to withstand strikes. 49

26 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES CHISES, PUNCHES AIGNMENT CHISES Designed to remove, cut or break materials with a hardness softer than the chisel's, such as concrete, rock, slag, brass, untreated steel, nuts, bolts, pins, etc. It is widely used in the construction industry, as well as in the installation and maintenance of fixed equipment and piping in the chemical and food industries. The tip's width dictates the chisel's uses, depending on the accuracy or brute force required. Made with micro-alloy steel for greater resistance. 6D Tip wider than body Designed to remove cold materials like iron, brass, bronze and steel. The tool's butt end is designed to withstand strikes. 6D 6A-3/ 6A- 6A-/ 6A-3/ 6A-7/ 6A- 6A-/ 6A-3/4X 6A-7/X 6A-1X CHISE SET -PIECE SET x 3/ x / x / 3/ x 3/ 7/ x 7/ x / x / 3/4 x 3/4 7/ x 1 1 x 1 3/ x 4. x 7.9 x x x x x x x x 30.2 E13 STRIKING TOOS 6 6 6C 6A 7-PIECE SET 6C -PIECE SET 6A -PIECE SET CHISE SET CHISE SET CHISE SET 6A- 6A-/ 6A-3/ 6A-7/ 6A- 6A-/ 6A-3/4X x / x / 3/ x 3/ 7/ x 7/ x / x / 3/4 x 3/4 x 7.9 x x x x x x A- 6A-/ 6A-3/ 6A-7/ 6A- E x / x / 3/ x 3/ 7/ x 7/ x x 7.9 x x x x.7 6A-/ 6A-7/ 6A- 6A-/ 6A-3/4X E / x / 7/ x 7/ x / x / 3/4 x 3/4" 7.9 x x x x x 19.1 E303 SUPERIOR QUAITY AFFORDAE TOOS 499

27 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES CHISES, PUNCHES AIGNMENT CHISES 6A- 76-3/ 72-3/ COD CUT CHISES DIAMOND TIP CHISES CAPE CHISES TIP A ODY TIP A ODY TIP A ODY 6A-3/ 6A- 6A-/ 6A-3/ 6A-7/ 6A- 6A-/ 6A-3/4X 6A-3/4X 6A-7/X 6A-7/X 6A-1X 6A-1X 6A-3/ 6A- 6A-/ 6A-3/ 6A-7/ 6A- 6A-/ 6A-3/4X 6A-3/4X 6A-7/X 6A-7/X 6A-1X 6A-1X / 3/ 7/ / 3/4 7/ 7/ / / / 3/ 7/ / 3/4 3/4 7/ 7/ 1 1 4, / 1/ 3/ 6 6 / STANDARDS: FEDERA GGG-P-31F, ASME 7.4M COD CUT CHISES FACT SHEET CUT AREA HARDNESS O RC ASME 7.47M STRIKING AREA HARDNESS O RC IMPACT HEIGHT/INCH / 76-3/ / 76A- 76A-/ 76A-3/ 76A- 76A-/ /32 3/ / / / 3/ 3/ / STANDARDS: FEDERA GGG-P-31C, ASME 7.4M DIAMOND TIP CHISE FACT SHEET CUT AREA HARDNESS O RC ASME 7.47M STRIKING AREA HARDNESS O RC IMPACT HEIGHT/INCH Designed to make V-shaped cuts and to clean interior corners / 72-3/ 11/64 13/ / 3/ / 1/ STANDARD: FEDERA GGG-C-313C Designed for cutting plumbing and make slits on metals. For removing, cutting or breaking materials with a hardness lower than the chisel's. Designed to remove cold materials like iron, brass, bronze and steel. The tool's butt end is designed to withstand strikes. 00

28 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES CHISES, PUNCHES AIGNMENT PUNCH AND CHISE HODERS Reduces the risk of hand injury. Ideal for holding punches and chisels up to 1 inch in diameter. Up to 1" holding capacity. Up to 1" holding capacity. 2A lued coating. Chromevanadium steel shaft. High-resistance ergonomic plastic handle. STRIKING TOOS 2 2A 2 SQUARE PUNCH AND CHISE HODER PUNCH AND CHISE HODER SHAFT SHAFT 2A 3/ / SUPERIOR QUAITY AFFORDAE TOOS 01

29 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES CHISES, PUNCHES AIGNMENT SPRING-OADED PUNCH SET Apply up to 3,00 PSI force. The user can easily control the amount of force applied by adjusting the spring's tension. This highly accurate tool offers great control. Ideal for work in tight areas or on jobs requiring great precision. 42AZ09 37-PIECE SET SPRING-OADED ETTER AND NUMER PUNCH SET DESCRIPTION 26 etters, A to Z numbers, 0 to 9 Spring-loaded punch Plastic case AZ09 The quality of URREA tools exceeds international manufacturing standards (ISO, ANSI, ASME, SAE, GSA, DIN, DGN, EMA, ANCE, VDE). When buying a URREA tool you are purchasing from the best tools in the world. INDISPUTAE QUAITY EADERSHIP (00)

30 STRIKING TOOS DEAD OW RUER MAETS AND PASTIC FACE A PEIN HOE PUNCH CHISES, PUNCHES AIGNMENT AIGNMENT There is a great variety of alignment bars for different purposes. They can be used to align, adjust, move or disassemble metal or wood pieces. Useful for prying PIECE SET AIGNMENT AIGNMENT PRY WITH TURNING DISTANCE ETWEEN HEXAGON PANES DISTANCE ETWEEN HEXAGON PANES / / STRIKING TOOS / Great tool for creating leverage, for aligning or for positioning mechanical parts or pipe flanges. The angled chisel tip allows greater leverage when used to remove wooden seals or machinery elements. AIGNMENT DISTANCE ETWEEN HEXAGON PANES 2 The flat tip is used mainly for aligning / 3/4 7/ / / SUPERIOR QUAITY AFFORDAE TOOS 03