Deadblow Hammer. Resists cut damage to Hammer head ends. Lightweight, plastic handle provides both comfort and control during use.

Transcription

1

2 ammers, unches, and hisels W offers a variety of striking tools that are regularly needed for maintenance and industrial applications. These hammers range in style from wood handled ball pein and sledge hammers to fiberglass handled ball pein, brass and deadblow hammers. The sizes range from 2 ounces to 2 pounds. Deadblow ammer on-sparking, no metal-to-metal contact. rgonomically designed for user comfort and maximum performance. 220 Our new rethane Deadblow hammer offers non-marring, nonsparking, non-cutting and noise reducing features. This deadblow hammer minimizes hammer bounceback, reducing muscle fatigue and improving productivity. The striking tool category also includes a diverse selection of punches, chisels, and pry bars. ach product is forged from hexagon alloy steel, properly hardened and tempered for demanding industrial applications. lso new are our new line of crewdriver handled ry Bars and unch/hisel older. These products provide improved user comfort and safety when properly used., & FTY: * rotective clothing and equipment should be worn to safeguard against flying chips. afety goggles/glasses and gloves are the minimum recommended protection. * ever use a hammer with a loose or damaged handle. * eplace hammers which show cracks, chips, mushrooming, or excessive wear. * ever strike hammer with another hammer. * lways avoid glancing blows and never strike upward. esists cut damage to ammer head ends. djustable screw allows holder to be used with most punches and chisels. -V Yellow allows for easier and quicker location of hammer. omfort Grip ry Bar ightweight, plastic handle provides both comfort and control during use. unch & hisel older Quality Tools For ndustry ince 882 Designed for powerful leverage and available in 8", 2", 8", 24", length. older keeps operator's hand safely away from swinging motion of the striking tool. ightweight, plastic handle provides both comfort and control during use.

3 ammers, unches, and hisels ammers Deadblow ammers roduct Weight Overall ead Face ode (ozs.) ength ength Diameter bs. Kgs. JW /6.8.6 JW JW JW JW / andles are ergonomically designed for user comfort and maximum performance. ard urethane construction: ) esists cut damage to hammer head. 2) rovides a non-marring contact surface that will not damage equipment. ) s non-sparking because of no metal-to-metal contact during application. 4) Will not absorb liquids. Deadblow feature minimizes hammer bounce back, reducing fatigue and improving productivity. -V yellow color allows for easier and quicker location of hammer at the job site. ower Drive ammers With Fiberglass andle roduct Weight andle Overall Face ode lass ength ength Diameter bs. Kgs. D lb D lbs D lbs D lbs hot-loaded head delivers more striking force per blow and reduces vibration as well as rebound. ushion grip handle provides greater comfort and safety. Durable design for a long lasting hammer.. Brass ammers w/fiberglass andle roduct Weight andle Overall Face ode lass ength ength Diameter bs. Kgs. B lbs B lbs B lbs deal for applications which require non-sparking conditions. The flat surface brass head absorbs impact blows, reduces rebound and helps eliminate marred work surfaces. on-slip cushion grip provides greater comfort and safety. WG Wear safety goggles. (sers and bystanders) Do not use chipped, mushroomed or cracked hammers. trike squarely and avoid glancing blows. Do not strike other hammers or similar hard surfaces. se body hammers only for striking automotive type sheet metal; Do not use near flammable substance. Do not use OOT or urethane hammers near liquid oxygen. 22

4 ammers, unches, and hisels ammers Wood andle Ball ein ammers roduct Weight andle Overall Face ode lass ength ength Diameter bs. Kgs. B oz B oz. 9 / B oz B oz B lb B-2 04 lbs. / B lbs B lbs. / deal for driving punches, chisels and other metal work. Wooden handles, which are made from white hickory and clear lacquered, are permanently wedged into the heads. ammer heads are drop-forged from specially selected steel and carefully heat treated for dependable strength, hardness, and uniformity. Fiberglass andle Ball ein ammers Wood andle ledge ammers 222 roduct Weight andle Overall Face ode lass ength ength Diameter bs. Kgs oz oz oz oz lb. / lbs. 2 4 / lbs lbs. 4 6 / deal for driving punches, chisels and other metal work. Fiberglass handle has a cushion grip for greater comfort and safety. ammer heads are drop-forged from specially selected steel and carefully heat treated for dependable strength, hardness, and uniformity. roduct Weight andle Overall Face ode lass ength ength Diameter bs. Kgs lbs lbs. /6 /6 / lbs. / lbs lbs. 2 /6 / lbs. / lbs. /6 4 / Double faced head is hardened and tempered forged for maximum strength and durability. andle is made from fire hardened hickory. Quality Tools For ndustry ince 882

5 ammers, unches, and hisels ammers Wood andle ross ein ammers roduct Weight andle Overall Face ode lass ength ength Diameter bs. Kgs lbs. 9 / ross pein hammer is designed to form or shape metals. Wooden handle, which is made from white hickory and clear lacquered, is permanently wedged into the heads. ammer head is drop-forged from specially selected steel and carefully heat treated for dependable strength, hardness, and uniformity. oft Face ammer Body w/fiberglass andle ead roduct Weight Dia- ead andle Overall ode lass eter ength ength ength Type bs. Kgs. F oz. 2 0 /6.8. F oz. 2 0 /6 Z.4.24 F oz. 2 0 /6 2 /6.6.4 F lbs. 4 /6 Z.68.6 F lbs /6 Z.6. F lbs F lbs Z F lbs /6 Z.82.8 F lbs F lbs. 2 2 /6 4 Z.8.62 F lbs F lbs. 4 Z luminum Z - Zinc lloy - hot loaded oft Face ammer Tips roduct ode ardness Diameter olor bs. Kgs. F ard Black F- 04 ard Black F ard 2 Black.8.08 F-2 04 ard 2 Black.4. F ard Black..26 F-0 04 edium ed F edium ed F edium 2 ed.8.08 F edium 2 ed.4. F edium ed..26 F edium ard ream F edium ard ream F edium ard 2 ream.8.08 F edium ard 2 ream.4. F edium ard ream..26 F oft Brown F oft Brown F oft 2 Brown.8.08 F oft 2 Brown.4. F oft Brown..26 F-0T 0404 Tough Green F-T 04 Tough Green F-20T 0428 Tough 2 Green.8.08 F-2T 04 Tough 2 Green.4. F-0T 0442 Tough Green..26 F-0X 049 xtra ard Yellow F-X 0466 xtra ard Yellow F-20X 04 xtra ard 2 Yellow.8.08 F-2X 0480 xtra ard 2 Yellow.4. F-0X 049 xtra ard Yellow..26 WG Wear safety goggles. (sers and bystanders) Do not use chipped, mushroomed or cracked hammers. trike squarely and avoid glancing blows. Do not strike other hammers or similar hard surfaces. se body hammers only for striking automotive type sheet metal; do not strike hard surfaces. Do not use near flammable substance. Do not use OOT or urethane hammers near liquid oxygen. 22

6 ammers, unches, and hisels unches in unches roduct tock oint ode ize Diameter ength bs. Kgs / / / /6 / / For driving out and removing already loosened pins and keys after initial movement by a solid or starter punch. olid unches roduct tock oint ode ize Diameter ength bs. Kgs / / For loosening frozen or tight pins and keys or knocking out rivets. lso called starter punches. ong Taper unches rick unches 224 roduct tock oint ode ize Diameter ength bs. Kgs / / / Designed for aligning the holes in metal pieces through which rivets, bolts, or screws will be inserted. Do not use for driving. lso called line-up, aligning or drift punches. roduct tock ode ize ength bs. Kgs For scribing lines into metal before cutting or riveting, and for punching starting holes for short metal screws. Quality Tools For ndustry ince 882

7 ammers, unches, and hisels unches enter unches roduct tock ode ize ength bs. Kgs / ierces or marks work by indentation for starting pilot drills in metal or other materials. hisels old hisels roduct tock Blade ode ize Width ength bs. Kgs / / / / The most commonly used chisels in the chisel line, cold chisels are designed for cutting, shaping and removing metal softer than the cutting edge of the chisel. xtra ong old hisels roduct tock Blade ode ize Width ength bs. Kgs Designed for cutting, shaping and removing metal softer than the cutting edge of the chisel ape hisels roduct tock Blade ode ize Width ength bs. Kgs Designed for cutting or grooving keyholes or slots. WG Wear safety goggles. (sers and bystanders) Do not use chipped, mushroomed or cracked hammers. trike squarely and avoid glancing blows. Do not strike other hammers or similar hard surfaces. se body hammers only for striking automotive type sheet metal; Do not use near flammable substance. Do not use OOT or urethane hammers near liquid oxygen. 22

8 ammers, unches, and hisels hisels Diamond oint hisels roduct tock quare ode ize ut ength bs. Kgs / Designed for making a V-groove in metal and to clean out inside corners. ound ose hisels roduct tock Blade ode ize Width ength bs. Kgs /6 / Designed for cutting round grooves in metal. lso called half round nose or gouge chisels. Wood hisels ivet Buster 226 roduct tock Blade ode ize Width ength bs. Kgs Designed for heavy duty wood cutting with one side ground to a sharp edge. roduct tock Blade ode ize Width ength bs. Kgs / Designed for shearing bolt heads and rivets. Quality Tools For ndustry ince 882

9 ammers, unches, and hisels Bars inch Bars Width roduct tock of ode ize Flat ength bs. Kgs sed for aligning, prying and positioning applications. oll Bars roduct tock ode ize ength bs. Kgs ligning and pry bar with long tapered body and 90 rolling head. ry Bars With andles roduct ode ength bs. Kgs unch and hisel older roduct ode ength bs. Kgs / WG Wear safety goggles. (ser and bystanders) Do not use pipe or lever extension. Do not use a prybar if chipped or cracked. Do not use a prybar as a punch or hammer. 22

10 ammers, unches, and hisels ets 4-pc enter unch et w/oll ouch roduct tock.6 bs. /.0 Kgs. ode Description ize ength -8 enter unch -9 enter unch -40 enter unch -42 enter unch #-4 / # / pc unch et w/oll ouch bs. /.8 Kgs. 8-pc hisel et w/oll ouch 2.2 bs. /.0 Kgs. 9-pc old hisel et w/oll ouch.8 bs. / 2. Kgs. roduct tock oint Diameter/ ode Description ize Blade Width ength - in unch -4 in unch - in unch -6 in unch -8 in unch -0 in unch - olid unch -4 olid unch - olid unch -6 olid unch - olid unch -2 ong Taper unch -26 ong Taper unch -28 ong Taper unch -0 rick unch -40 enter unch -42 enter unch roduct tock Blade Width/ ode Description ize quare ut ength -40 ape hisel -42 ape hisel -44 ape hisel -46 ape hisel -60 Diamond oint hisel -62 Diamond oint hisel -2 ound ose hisel -4 ound ose hisel roduct tock Blade ode Description ize Width ength -8 old hisel -0 old hisel -2 old hisel -6 old hisel -20 old hisel -24 old hisel -28 old hisel -2 old hisel -6 old hisel Quality Tools For ndustry ince 882 #- / # /6 /6 /6 /6 /6 /6 /6 /6 4 /6 /6 4 4 /6 6 8 /6 9 6 #-8 / # /6 / #-9 / # /

11 ammers, unches, and hisels ets 8-pc unch & hisel et w/oll ouch roduct tock oint Diameter/ ode Description ize Blade Width ength -4 in unch -6 in unch -8 in unch - olid unch -40 enter unch -0 old hisel -6 old hisel -24 old hisel /6 /6 /6 /6 /6 6 #-8 / # bs. /.8 Kgs. -pc unch & hisel et w/oll ouch roduct tock oint Diameter/ ode Description ize Blade Width ength -4 in unch -6 in unch -8 in unch -4 olid unch - olid unch -6 olid unch -2 ong Taper unch -28 ong Taper unch -2 rick unch -40 enter unch -0 old hisel -2 old hisel -6 old hisel -20 old hisel -24 old hisel -42 ape hisel -62 Diamond oint hisel roduct tock oint Diameter/ ode Description ize Blade Width ength - in unch -4 in unch - in unch -6 in unch -8 in unch -0 in unch - olid unch -4 olid unch - olid unch -6 olid unch - olid unch -2 ong Taper unch -26 ong Taper unch -28 ong Taper unch -0 rick unch -40 enter unch -42 enter unch -8 old hisel -0 old hisel -2 old hisel -6 old hisel -20 old hisel -24 old hisel -28 old hisel -2 old hisel -6 old hisel /6 /6 /6 /6 /6 /6 /6 /6 /6 4 /6 /6 4 4 /6 6 8 /6 9 6 /6 /6 /6 4 /6 8 6 /6 /6 26-pc unch & hisel et w/oll ouch / / #- / # bs. / 2. Kgs. #-26 / # bs. / 4. Kgs. WG Wear safety goggles. (sers and bystanders) Do not use punch or chisel having mushroomed ends; dress edges or mushroomed ends to original shape with a hand file. ammer head diameter should be approximately " larger than head of punch or chisel. Do not use near flammable substance. 229

12 ammers, unches, and hisels ets 4-pc inch & oll Bar et.06 bs. /.20 Kgs. roduct tock ode Description ize ength -80 inch Bar -82 inch Bar - oll Bar -8 oll Bar #B- / # Quality Tools For ndustry ince 882