NEW! COMPUTORQ3 ELECTRONIC TORQUE WRENCH Simple to use. Sleek new design. TOOLBOXES AND BAGS Perfect for organizing tools

Transcription

1 SALES BLASTER 208 ST QUARTER COPUTORQ3 ELECTRONIC TORQUE WRENCH Simple to use. Sleek new design. See Page 2 TOOLBOXES AND BAGS Perfect for organizing tools See Page 4 NEW! RATCHETING COBINATION WRENCHES Ratcheting gear minimizes swing arc in tight places See Page 8 ERGONOIC HAND TOOLS We use a scientific approach to develop ergonomic hand tools See Pages 8-9 OFFER VALID WHILE SUPPLIES LAST JANUARY, 208 TO APRIL 30, 208

2 COPUTORQ 3 ELECTRONIC TORQUE WRENCHES The COPUTORQ 3 Electronic Torque Wrench is a simple to use digital readout wrench that displays real time torque values in any of four torque units, ft.lbs., in.lbs., Nm, kg.cm. Simply set the desired torque value and apply force until the green LED illuminates. Great for light industrial, automotive, motorcycle, watercraft and aircraft applications. 240CI3 /4" Drive ft. lb. $72.98 $ CI3HA /4" Drive ft. lb. $ $ HIGH ACCURACY 002CF3 3/8" Drive 0-00 ft. lb. $ $ CF3HA 3/8" Drive 0-00 ft. lb. $, $ HIGH ACCURACY 2503CF3 /2" Drive ft. lb. $ $ CF3HA /2" Drive ft. lb. HIGH ACCURACY $,40.29 $ The certification of accuracy provided per ASE and ISO Standards is 20% to 00% of full scale. TORQUE SCREWDRIVERS - ICRO-ADJUSTABLE *HIGH ACCURACY % Clockwise direction only. It couldn t be easier to use! Features Sleek new design 5-degree flex ratcheting head Push button socket release head Large, easy to read digital display Long battery life, uses 2 each CR23 lithium batteries Ergonomically designed molded non-slip rubber grip Torques in both clockwise and counterclockwise directions Battery saving auto-shutoff after two minutes COPUTORQ 3 remembers last unit and torque setting selected Audible tone sounds when set torque value is reached, if the set torque value is exceeded, an alarm tone will sound. 3 color LED light bar YELLOW LED indicates approaching desired torque setting GREEN LED indicates desired torque value is reached RED LED indicates fastener was over torqued, loosen and re-tighten. HIGH ACCURACY ODELS AVAILABLE When desired torque value is reached, display will hold value and flash for ten seconds. COPUTORQ 3 will operate in any of four torque units, foot pounds (ft. lbs.), inch pounds (in. lbs.), newton meter (Nm) or kilogram centimeter (kg. cm.). ACCURACY: ±2% CW of readings from 20% to 00% of full scale ±3% CCW of readings from 20% to 00% of full scale N.I.S.T. traceable certificate of calibration included Adjustable models offer versatility for applications that require more than one torque value. These torque screwdrivers are particularly suited for the electronics industry and for instrument assembly work. A simple, cam-over design prevents over-tightening and possible damage to components. Torque settings are easily and accurately changed with a unique adjusting knob and easy-to-read window scale. Adjusting the screwdriver is simple. Just pull out the adjusting knob to unlock, turn to the desired setting, then push the knob in until it clicks! 6S Product Code Torque Range Increments W x L (inches) Weight (oz.) List Price: Sale Price: 6S in. ozs. in. oz.. x $ $ S 3-5 in. lbs..2 in. lbs.. x $384.7 $ S 5-40 in. lbs..5 in. lbs..2 x $ $ NS 0-80 cnm cnm. x $358.9 $ NS cnm 2 cnm. x $ $ NS cnm 5 cnm.2 x $ $68.60 TORKY - SINGLE SETTING WRENCHES CDI s TORKY is a right angle pre-set torque wrench. Torky is designed for production torque applications that require higher values than a torque screwdriver can deliver. The comfortable design eases the strain of repeated uses. Torque value may be ordered factory pre-set at an additional charge or it may be easily set by the operator with any quality torque calibration system. When the proper torque value is reached, a momentary release or break can be felt. Available in three drive styles to fit most needs. TORKY - SINGLE SETTING WRENCHES Product Code Drive Torque Range W x L (inches) Weight (oz.) List Price: Sale Price: 50TP- /4 ale Square in.lbs. x $ $ TPA- /4 Female Hex in.lbs. x $252.6 $ TP- 3/8 ale Square in.lbs. x $ $2.20 Prevents premature wear of carbide inserts and damage to cutter head due to improper clamp load. Features Factory Pre-Set models are set at the factory to the customer s specified torque setting and are furnished with a Certificate of Calibration Please specify desired torque setting when order is placed Three models available Simple, easy to use design Ruggedly built for years of reliable service Operates bi-directionally Accuracy: ± 6% of indicated value, CW, from 20% to 00% of full scale 2

3 ICROETER ADJUSTABLE NEWTON ETER TORQUE WRENCHES - SINGLE SCALE etal Handle Single Scale. The metal handle series offers the user a rugged, industrial strength torque wrench able to withstand the rigors of professional use. Handles are lightly knurled for a tough, non-slip grip. Product Code Nm Range Sq. Drive Incr. List Price: Sale Price: 602NRHSS 0-60 Nm $ $ NRHSS Nm $37.3 $ NRHSS Nm 2 2 $ $ NRHSS Nm 2 2 $ $ NRHSS Nm $,27.22 $ NRHSS* Nm 0 $2,93.0 $, *NOTE: 5005NRHSS supplied with one extension handle and is packed in a metal box. *NOTE: All single scale Newton eter only. FLEX-HEAD ICROETER ADJUSTABLE TORQUE WRENCH Product Code Drive Size Range Increments Ratchet List Price: Sale Price: 802FRFHSS 3 8" 0-80 ft. lb. 0.5 Flex-Head $ $ FRFHSS ICROETER ADJUSTABLE TORQUE WRENCHES - DUAL SCALE etal Handle Dual Scale. The metal handle series offers the user a rugged, industrial strength torque wrench able to withstand the rigors of professional use. Handles are lightly knurled for a tough, non-slip grip. Product Code Drive Size English Range Incr. Nm Range Incr. List Price: Sale Price: 50RH in. lb Nm 0.5 $29.85 $ RH in.lb Nm 0.2 $29.38 $ RH in. lb Nm.2 $ $ RH in. lb Nm.2 $29.85 $ RH in. lb Nm.2 $30.29 $ RH in. lb Nm.6 $37.3 $ RH in. lb Nm.6 $37.08 $ RH in. lb Nm.2 $ $ FRH ft. lb Nm.7 $37.3 $ FRH ft. lb Nm.7 $37.3 $ FRH ft. lb Nm.4 $ $ FRH ft. lb Nm.4 $ $ FRH ft. lb Nm 3.4 $,22.47 $ FRH ft. lb Nm 6.8 $,26.48 $ FRH* ft. lb Nm 6.8 $2,93.0 $, FHSS** ft. lb. 0 N/A N/A $5,872.2 $2,56.65 **NOTE: 0005FRH supplied with one extension handle and is packed in a metal box. **NOTE: 20005FHSS (English scale only) supplied with two extension handles, fixed/non-ratcheting head and is packed in a sturdy cardboard box. COFORT GRIP ICROETER ADJUSTABLE TORQUE WRENCHES - DUAL SCALE Product Code Drive Size English Range Incr. Nm Range Incr. List Price: Sale Price: 50RPH 4" in. lb Nm.2 $29.85 $ RPH 3 8" in. lb Nm.2 $30.29 $ RPH 3 8" in. lb Nm.6 $37.3 $ FRPH 3 8" 0-00 ft. lb Nm.7 $37.3 $ FRPH 2" ft. lb Nm.4 $ $ FRPH 2" ft. lb Nm.4 $ $ FRPH 3 4" ft. lb Nm 6.8 $,27.22 $

4 TOOL BAGS & TOTES 600 Denier polyester prevents the bag from damage and provides flexibility and is lightweight. Plastic hard bottom and double stitching reinforcement is 00 % waterproof and easy to clean. Heavy duty PVC zippers makes closing and opening quick and easy. 9" OPEN BAG WITH HARD BOTTO List Price: $24.89 Sale Price: $ " OPEN BAG WITH LUX HARD BOTTO List Price: $57.86 Sale Price: $ FB-9A 4750FB-9B 9" CLOSED BAG WITH HARD BOTTO 24" CLOSED BAG WITH HARD BOTTO List Price: $00.65 Sale Price: $43.5 List Price: $42.35 Sale Price: $ FB2-9A 4750FB2-24A LAPTOP & TOOLS BAG WITH HARD BOTTO List Price: $74.59 Sale Price: $ " CLOSED BAG ON WHEELS List Price: $ Sale Price: $ FB FB2W-24A 2" ELECTRICIAN BAG WITH HARD BOTTO List Price: $6.6 Sale Price: $ FB5A SALL TOOL ORGANIZER List Price: $6.8 Sale Price: $ FB FB5B EDIU TOOL ORGANIZER List Price: $28.46 Sale Price: $ FB5C LARGE TOOL ORGANIZER List Price: $36.23 Sale Price: $5.55 PLASTIC TOOL BOXES Heavy duty boxes made of virgin polypropylene are resistant to hot and cold temperatures. Strong and sturdy boxes, 2 mm thick, can take high load capacity, even allowing the user to stand on them. etallic latches are galvanized making them durable and rust resistant. Pad lock can be added to the box. 4750PTB PTB PTBW47 9.7" x.6" x 0.6" TOOL TOTE List Price: $69.43 Sale Price: $ " x 2" x.6" TOOL TOTE List Price: $83.47 Sale Price: $35.75 TOOL TOTE ON WHEELS List Price: $6.37 Sale Price: $

5 ODULAR INDUSTRIAL STORAGE Cabinet Heights from 30" to 59" Standard full length forklift base UNPRECEDENTED STORAGE OPTIONS TO ACCOODATE ANY STORAGE NEED TheWilliams odular Industrial Storage Program is designed, engineered and built specifically for industrial settings, processes, andsystems.heavy-dutysteelconstruction,innovativesafetyand security features, and workplace-specific configurations provide for customizable, scalable storage that meets even the most complex needs. ultiple Drawer Height/Depth Options Cabinet Widths from 23" to 58" WORK SURFACES Available in a variety of shapes and materials. COLOR OPTIONS 00% View Drawer Extension Full-Width Aluminum Handles with Safety Overlap and 45 Angle SWP Plus Series - 32-/2" Wide Ask your Snap-on Industrial Brands Representative for full options & pricing! 5

6 225 PIECE INTEREDIATE AINTENANCE SERVICE SET WSC-225-TH Complete Intermediate Tool Set (223 Pieces Total) $7,48.0 $7, PIECE TOOLS@HEIGHT GENERAL AINTENANCE SERVICE SET WSC-6-TH Complete Tools@Height General Service Tool Set Only (6 Pieces Total) $9, $4, PIECE TOOLS@HEIGHT STARTER SET WSC-45-TH 45 Piece Tools@Height Starter Set $, $ PIECE TOOLS@HEIGHT STARTER SET WSC-27-TH 27 Piece Tools@Height Starter Set $757.5 $ PIECE TOOLS@HEIGHT BASIC AINTENANCE SERVICE SET WSC-72-TH Complete Tools@Height Basic $6, $2, aintenance Tool Set in Safe Bucket 6

7 20008 DROP FORGED C-CLAPS Deep Throat Design, Copper Plated Screw Screw Product Capacity Throat Depth Diameter Working ax. Hand Frame Proof Sale Code (Inches) (Inches) (Inches) Load (lbs) Load (lbs) Load (lbs) List Price: Price: /4 9/ $37.44 $ /6 9/ $42.22 $ /4 / $47.72 $ /6 3/ $65.86 $ / $87.05 $ / $0.3 $ /2 7/ $68.3 $72.05 Features Copper plated screw resists weld splatter Drop-forged and heat treated for maximum strength and greater rigidity I-Beam design for extra strength Powder coated frame resists rust "Safety Yellow" color makes clamps easy to locate in dark work areas DROP FORGED C-CLAP SET Product Code Contents Include: List Price Sale Price: Piece C-Clamp Set. Includes $24.38 $9.85 sizes 2", 4", 6", and 8" WS-72RSC SUPERCOBO COBINATION WRENCHES WS-72YSC 7 Piece Hi-Vis Combination Wrench Set, 2 Point, SAE, in Pouch WS-70RSC 7 Pc. Hi-Vis RED Combination Wrench Set, 2 pt, SAE, in Pouch $98.88 $85.25 WS-70YSC 7 Pc. Hi-Vis YELLOW Combination Wrench Set, 2 pt, SAE, in Pouch $98.88 $85.25 Piece Hi-Vis Combination Wrench Set, 2 Point, SAE, in Pouch WS-7RSC Pc. Hi-Vis RED Combination Wrench Set, 2 pt, SAE, in Pouch $ $70.5 WS-7YSC Pc. Hi-Vis YELLOW Combination Wrench Set, 2 pt, SAE, in Pouch $ $ Piece Hi-Vis Combination Wrench Set, 2 Point, SAE, in Pouch WS-72RSC 4 Pc. Hi-Vis RED Combination Wrench Set, 2 pt, SAE, in Pouch $ $280.5 WS-72YSC 4 Pc. Hi-Vis YELLOW Combination Wrench Set, 2 pt, SAE, in Pouch $ $280.5 Features SUPERCOBO open end has specially designed grooves that direct wrench force away from fastener corners. SUPERTORQUE box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points. eets or exceeds aerospace specification AS 954 for 2 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application. ay be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy. Box and open end openings are identical SAFETY UTILITY KNIVES & BLADES Product Code Description List Price Sale Price: Ambidextrious Safety Cutter with Holster and Lanyard $32.8 $ Pack Replacement Safety Point Blades for $44.85 $ Pack Film Cutter Unit for $.79 $ DISPOSABLE SAFETY CUTTER Lightweight, ergonomic, ambidextrious disposable safety cutter $7.02 $3.00 7

8 RATCHETING COBINATION WRENCHES High Polish Chrome Finish, 2 Point, SAE Product Code Size OAL List Price: Sale Price: 208RS /4 4 5/6 $50.70 $ RS 5/6 5 29/32 $49.4 $2.05 2RS /32 6 5/32 $52.20 $ RS 3/8 7 $47.97 $ RS 7/6 7 5/8 $47.97 $ RS /2 8 /6 $52.26 $ RS 9/6 9 /4 $56.88 $ RS 5/8 0 /4 $6.49 $ RS /6 0 7/8 $63.83 $ RS 3/4 2 $70.33 $30.5 WS-70RS 7 Piece Ratcheting Combination Wrenches, $ $ /8" to 3/4" WS-80RS 0 Piece Ratcheting Combination Wrenches, $588.9 $252.0 /4" to 3/4" 2430G ERGO LONG NOSE PLIERS True Ergonomic Handles with Bi-olded Grips and On/Off Return Spring Product Code Overall Length (Inches) Jaw Length (Inches) 2430G-40 5 /2 /2 2430G-60 6 /4 5 /6 aximum Cutting Capacity (Inches) List Price: Sale Price: 3 /64 Hard Steel $49.56 $2.25 /6 Hard Steel $53.9 $ G RATCHETING COBINATION WRENCHES High Polish Chrome Finish, 2 Point, Product Code Size OAL List Price: Sale Price: 20RS 0 79 $47.84 $ RS 94 $47.97 $ RS $49.92 $ RS 3 22 $52.26 $ RS $56.75 $ RS $59.87 $ RS 6 26 $6.49 $ RS $63.70 $ RS 8 29 $66.7 $ RS $70.4 $30.05 WS-0RS 0 Piece Ratcheting Combination Wrenches, 0 mm to 9 mm $6.52 $262.0 ERGO SIDE CUTTING COBINATION PLIERS Ergonomically Designed Handles with Bi-olded Grips and On/Off Return Spring Product Code Overall Length (Inches) Jaw Length (Inches) aximum Cutting Capacity (Inches) List Price: Sale Price: 2628G-60 6 /4 5 /6 /6 Hard Steel $47.80 $ G /6 5 /64 Hard Steel $50.77 $ G /2 7 /64 Hard Steel $55.03 $ Features SUPERCOBO open end has specially designed grooves that direct wrench force away from fastener corners. SUPERTORQUE box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points. anufactured from special alloy steel, precision forged and head treated for optimum strength and durability. Ratcheting gear features up to 80 teeth, minimizing swing arc in tight places. Sized for optimum comfort and balance Nickel-chrome plating helps protect against corrosion and makes clearning easy. BIG-OUTH ERGO ADJUSTABLE JOINT PLIERS True Ergonomic Handles with Bi-olded Grips Product Code Overall Length (Inches) aximum Jaw Opening (Inches) Tip Width (Inches) List Price: Sale Price: /2 3 /8 $37.62 $6.5 8

9 YOU SHOULD NEVER HAVE TO ADAPT YOUR HANDS TO A TOOL. OUR ERGO TOOLS EAN YOU DON T HAVE TO. A fusion of innovation, design & materials: Bahco s ERGO tools are designed around you. They belong in your hand and respond to the demands of every twist and turn. ERGO Tools protect the 42 different hand muscles required for a secure grip, prevent avoidable conditions and, most importantly, make demanding work easier. 6 PIECE ERGO IXED SCREWDRIVER SET Three Component Handle with Black Oxide Tips Piece ERGO Screwdriver Set Phillips / Slotted $2.82 $ PIECE ERGO 000V SCREWDRIVER WITH SLI BLADE SET Three Component Handle with Black Oxide Tips BE-9890SL 2 Piece ERGO Screwdriver with Slim Blade Combination Tip Set $64.78 $ PIECE ERGO IXED SCREWDRIVER SET Three Component Handle with Black Oxide Tips BE Piece ERGO Screwdriver Set Phillips / Slotted $86.38 $ RC US 2 PIECE ERGO 000V SCREWDRIVER WITH SLI BLADE SET Three Component Handle with Black Oxide Tips BE-989SL 2 Piece ERGO Screwdriver with Slim Blade Phillips Set $45.48 $ R US 6 PIECE ERGO IXED SCREWDRIVER SET Three Component Handle with Black Oxide Tips BE Piece ERGO Screwdriver Set Phillips / Slotted /Pozidriv $96.66 $4.45 Design Program Length aximum Jaw Opening Product Code (Inches) (Inches) Chrome Finish: 903 RC US 8 2 Black Phosphate Finish: 9029 R US 8 /2 903 R US 8 / R US 8 / R US BIG-OUTH ERGO ADJUSTABLE WRENCHES Designed According to Bahco s Scientific -Step Ergonomic Head Thickness (Inches) 2 /2 /2 /2 3 8 Jaw Tip Thickness (Inches) List Price: Sale Price: 4 $55.07 $23.60 /4 $48.59 $20.85 /4 $46.86 $20.0 /4 $0.9 $ $29.43 $

10 Snap-on Industrial Brands: A TRADITION OF TRUST Whatever your job, whatever your industry, whatever your challenge Williams tools never flinch. Since 882 Williams has met the harshest challenges of the most demanding industries. Williams was among the first manufacturers in the world to offer mass produced drop-forged tools, a 5 angle wrench, and heavy-duty slugging wrenches. A century and a quarter later we continue to offer unique and innovative products for those industries, whose demands are greater than ever. Williams Tools: our heritage, your future. Bahco, inventor of the original adjustable wrench, is the world leader in adjustable wrenches, ergonomics, and cutting tools. We pioneered the bi-metal saw blade, an extraordinary achievement that melds two different metals into one saw blade that incorporates the best characteristics of each. We also know that each tool has to fit the hand, and have applied the science of Ergonomics to hand tool design in a unique -step scientific process called ergo. Bahco offers quality tools, saws and accessories that are synonymous with safe, comfortable, and productive performance. Bahco Tools: work smarter faster better. No one manufactures and sells more professional-grade torque products. We are the world s largest supplier of industrial quality torque tools, and a respected leader in precision torque, force and tension calibration systems. CDI is ISO 900 certified and a pioneer in the development of digital torque measuring instruments. So whether it s torque wrenches and drivers or torque testing and calibration equipment, all meet the most exacting standards. CDI Torque Products: torque without compromise. snapon.com/industrialbrands

11 67 PIECE /4" DRIVE SOCKET SET 6 Point Rugged-Case-System Tool Set, SAE and etric Contents Include: /4" Drive Tools, /4" Drive Deep 6 Point Sockets sizes: 4 to 3, /4" Drive Deep 6 Point Sockets SAE sizes: 3/6" to 9/6", /4" Drive Shallow 6 Point Sockets sizes: 4, 7 and 8, /4" Drive Shallow 6 Point Sockets SAE sizes: 3/6" to 9/6", /4" Drive Hex Bit Sockets SAE sizes: /8 to 5/6, /4" Drive Hex Bit Sockets sizes: 3 to 8, /4" Drive Slotted Bit Sockets SAE sizes 5/32" to 9/32", /4" Drive Phillips Bit Sockets SAE sizes #0, #, # A 67 Piece /4" Drive Socket Set $ $ PIECE 3/8" DRIVE SOCKET, SCREWDRIVER, & WRENCH SET 6 & 2 Point Rugged-Case-System Tool Set, SAE and etric Contents Include: /4" Drive Tools, 3/8" Drive Tools, 2 Point Combination Wrenches sizes: /4 to 5/8, Comfort Grip Screwdrivers, /4" Hex Screwdriver Bits, 3/8" Drive Shallow 6-Point Sockets SAE sizes: /4" to ", 3/8" Drive Shallow 6-Point Sockets sizes: 6 to 9 and /4" Hex Screwdriver Bits 50605A 63 Piece 3/8" Drive Socket, Screwdriver, $ $27.20 and Wrench Set 36 PIECE /4" DRIVE SOCKET SET 6 Point Rugged-Case-System Tool Set, etric Contents Include: /4" Drive Tools, /4" Drive Shallow 6 Point Sockets sizes: 4 to 3, /4" Drive Phillips Socket sizes: #, #2, #3, /4" Drive Slotted Socket sizes: 4, 5.5, 7, /4" Drive Hex Bit Sockets sizes: 3 to 8, /4" Drive Torx Bit Socket T8 to T A 36 Piece Socket Set $36.97 $ PIECE /2" DRIVE BASIC TOOL SET 2 Point Rugged-Case-System Tool Set, etric Contents Include: /2" Drive Tools and /2" Drive Shallow 2 Point Sockets sizes: 0 to Piece Basic Tool Set, etric $233.7 $ PIECE /2" DRIVE BASIC TOOL SET 2 Point Rugged-Case-System Tool Set, SAE Contents Include: /2" Drive Tools and /2" Drive Shallow 2 Point Sockets SAE sizes: 3/8" to -/4" Piece Basic Tool Set, SAE $233.7 $85.95 Features SUPERTORQUE lobular openings for greater turning power without deforming the fastener Designed for maximum engagement on 6 point fasteners Suitable for use with pneumatic and electric impact wrenches Specially heat treated for impact use to provide long life, safety, and durability Drive end features pin retention hole and groove

12 SOCKET AND DRIVE TOOL SETS SB-29HFTB 29 PIECE 3/8" DRIVE SOCKET AND DRIVE TOOL SET 26 PIECE /4" DRIVE SOCKET AND DRIVE TOOL SET 6 Point etric, Packed in Exclusive KeepSafe-Foam System with with etal Box 6 Point SAE, Packed in Exclusive Keep-SafeFoam System with with etal Box Contents Include: Drive Tools, Shallow 6 Point WS-26HFTB Sockets sizes: 8mm to 9mm, Deep 6 Point Sockets sizes: 8mm to 9mm SB-29HFTB List Price: $ Sale Price: $8.35 Contents Include: Drive Tools, Shallow 6 Point Sockets sizes: 5/32" to 9/6", Deep 6 Point Sockets sizes: 3/6" to 9/6" WS-26HFTB List Price: $ Sale Price: $42.0 WSB-23HFTB 23 PIECE 3/8" DRIVE SOCKET AND DRIVE TOOL SET 20 PIECE /2" DRIVE SOCKET AND DRIVE TOOL SET 6 Point SAE, Packed in Exclusive Keep-SafeFoam System with with etal Box 2 Point etric, Packed in Exclusive KeepSafe-Foam System with with etal Box SS-20FTB Contents Include: Drive Tools, Shallow 6 Point Sockets sizes: 3/8" to 7/8", Deep 6 Point Sockets sizes: 3/8" to 7/8" WSB-23HFTB List Price: $ Sale Price: Sockets sizes: 0mm to 36mm SS-20FTB $ PIECE /4" DRIVE SOCKET AND DRIVE TOOL SET WSS-5FTB Sockets sizes: 3/6" to 9/6" List Price: $ Sale Price: $92.35 AUTHORIZED DISTRIBUTOR Offer Valid While Supplies Last January, April 30, $ Sale Price: $ Point SAE, Packed in Exclusive KeepSafe-Foam System with with etal Box Contents Include: Drive Tools, Shallow 6 Point WS-5HFTB List Price: 5 PIECE /2" DRIVE SOCKET AND DRIVE TOOL SET 6 Point SAE, Packed in Exclusive Keep-SafeFoam System with with etal Box WS-5HFTB Contents Include: Drive Tools, Shallow 2 Point Contents Include: Drive Tools, Shallow 2 Point Sockets sizes: 7/6" to " WSS-5FTB List Price: $ Sale Price: $67.55