The Good Fencing Guide Price Book

Transcription

1 Crafted For Life, Made With Passion. The Good Fencing Guide Book All prices exclude VAT July 2018

2 Crafted for Life, Made with Passion Hopefully using this booklet to find the prices for our products in the Good Fencing Guide will be very simple and it should be almost self-explanatory after a look at the two books. However, here are some pointers: If you identify the page number that the product is on, say it is Venetian and it s page 19 of the Good Fencing Guide, look at the right hand coloured margin on the page of the price booklet - this tells you at a glance which pages are covered on which page - for instance, you are looking for garden gates pages It is also colour coded the same as the section colour in the main book to help you spot the section you want to be in. Now look for the page heading on the page in the price booklet, Page 4 - Garden Fencing Panels should be easy to spot, and you should find columns for the product dimension, erence code and. You may note a small image of some of the main products to help you even more, but please remember we are here to help with any queries you have, just call: Contents and s for Product Sections: Garden Fencing Panels, Posts & Accessories. 1-7 Garden Gates 8-10 Trellis, Shelters and Decking Gates: Entrance, Drive & Courtyard Agricultural, Equestrian & Demarcation Security, Chain Link & Miscellaneous Jacksons Fencing Calculator 31 Metric Imperial Conversion Chart 32 Information on FSC and PEFC 32 Approved Installer Programme 33 Delivery Charges 33

3 Featherboard Panels (page 9) Level top Concave Convex 0.6m 0.9m 1.05m 1.35m 1.65m n l l l l l l l at highest point 1.05m 1.35m 1.65m m m m m m at highest point 1.05m (0.9m at sides) (1.05m at sides) 1.35m ( at sides) (1.35m at sides) 1.65m ( at sides) (1.65m at sides) m m m m l l Tongue & Groove Effect Panels (page 11) Level top 0.91m 1.22m 1.52m 1.65m 1.83m Level top l l l l l Railing Topper Panels (page 13) Concave Convex at highest point 1.52m 1.83m l l Convex Panel cut width kits For use if panel will need to be cut on site. For Tongue and Groove Effect Panels. 0.91m 1.22m 1.52m 1.65m 1.83m K l K l K l K l K l Jakcure End Grain Treatment Where cutting or drilling after treatment cannot be avoided use Jakcure End Grain Treatment to ensure no timber is left untreated. 500g bottle l Level Top Concave Convex n n n l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY t WHILE STOCK LASTS i INCLUDES BOLTS AND SCREW Garden Fencing Panels - Page

4 Vertical and Horizontal Hit and Miss (page 15) Vertical Hit & Miss 0.91m 1.22m 1.52m 1.83m l l l l Horizontal Hit & Miss 0.91m 1.22m 1.52m 1.83m l l l l Panel cut width kits For use if panel will need to be cut on site. For Hit and Miss Panels. 1.83m std K l Garden Fencing Panels - Pages Louvre (page 17) 0.91m 1.22m 1.52m 1.83m Venetian Hit & Miss (page 21) 0.6m 0.9m Paliframe (page 31) Woven (page 35) 0.91m 1.22m 1.52m 1.83m m m n n l l n n n n m l Venetian (page 19) 0.61m 0.91m 1.22m 1.52m 1.65m 1.83m Panel cut width kits For use if panel will need to be cut on site. For Venetian Hit & Miss Panels 0.6m 0.9m 1.83m std 1.83m std K l K l K l K l l l l l n l Panel cut width kits For use if panel will need to be cut on site. For Paliframe Panels 1.83m K l Panel cut width kits For use if panel will need to be cut on site. For Woven Panels Chilham (page 33) 0.91m 1.22m 1.52m 1.83m Panel cut width kits For use if panel will need to be cut on site. For Venetian Panels 0.61m 0.91m 1.22m 1.52m 1.65m 1.83m K l K l K l K l K n K l n n l l Canterbury Combi (page 37) 1.83m l Please Note: from February 2018 our Canterbury Combi panel has been modified to ensure a contemporary design. Should you require panels pre-february 2018 please do let us know l 5.50 Panel cut width kits For use if panel will need to be cut on site. For Chilham Panels 0.91m 1.22m 1.52m 1.83m K l K l K l K l Panel cut width kits For use if panel will need to be cut on site. For Canterbury Combi Panels 1.83m std Jakcure End Grain Treatment Where cutting or drilling after treatment cannot be avoided use Jakcure End Grain Treatment to ensure no timber is left untreated. 500g bottle K l All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website 2 All prices exclude VAT Buy Online: or Call: for Sales or Advice

5 Jaktop Panels (page 39) Palisade Panels - Level Top and Concave (page 41) Palisade level top Concave Rounded tops 1.0m l l Jaktop Panels (for use with slotted posts) 0.86m n n n Traditional Palisade Fencing (page 43) Palisade Fencing Posts (for Traditional Fencing) Intermediate Rounded tops Pointed tops l l l l n m Palisade Fencing Corner Posts (for Traditional Fencing) These are 0.6m longer than the fence height & are 100 x 100mm section. Planed & morticed two ways. Fence 1m Post Rounded tops l l n Pointed tops l n m Pointed tops 1.0m n m Palisade Fencing Rails (for Traditional Fencing) long nominal 87 x 38mm section, scarfed both ends l 6.15 Palisade Fencing Pales (for Traditional Fencing) (14 per section) Rounded tops Pointed tops 1m l l l l l m Guide price per m for Traditional Palisade fencing 1m 2 rails 1.0m n m Traditional Featherboard Fencing (page 44-45) Featherboard Posts (for Traditional Fencing) Featherboard Rails (for Traditional Fencing) 125 x 100mm section recessed for rails 2 or 3 times according to height x 87 x 37mm l 6.25 Fence Post l Featherboard Pales (for Traditional Fencing) 29 per section l Fence Pale 2.7m l with gravel board Featherboard Corner Posts (for Traditional Fencing) 1.05m l x 1m weathered two ways. 1.35m l m l 1.35 Fence Post 2.7m l n l Fence Pale without gravel board 0.9m 0.9m l Featherboard Gravel Boards (for Traditional Fencing) l x 150 x m l l l 1.47 Capping for traditional featherboard fencing Guide price per m kit with fixings BM l l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY t WHILE STOCK LASTS i INCLUDES BOLTS AND SCREWS Garden Fencing Panels - Pages

6 Garden Fencing Panels - Pages Aran Panels Available 1.83m m p Aran Panels Jakcure End Grain Treatment Where cutting or drilling after treatment cannot be avoided use Jakcure End Grain Treatment to ensure no timber is left untreated. Available 1.0m Mitre Panels m m p g bottle l 5.50

7 Available 0.607m 0.907m Gravel boards Metro Panels m m m p Posts for Metro fencing can vary in height depending on the chosen fence panel height combination ranging from up to 3.0m. Please enquire with our sales team to confirm your exact requirements. l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) Available Storm Panels / m p Garden Fencing Panels - Pages

8 Fencing Posts & Accessories - Pages Slotted Jakpost and Standard Posts (page 46) Slotted Jakposts Posts are 100 x 100mm with two 54 x m slots for panels. Intermediate Corner Posts End Posts Fence 0.6 & 0.75m 0.9m & 0.75m 1.05m & 1.4m & 1.65m & 1.85m 2.0m Post 1.06m 2.1m 2.7m Screws (page 47) Stainless Steel Self-Drilling Countersunk Torx Head Screw Pack of mm l Hedgehog Gravel Boards (page 48) 1.83m long. For use with Slotted Posts l Support Peg 600 x 50 x 50mm l Post Caps and Finials (page 50) All s Exclude VAT l l l l l l l l l l l l l l l l l l Heavy Duty Jakposts Intermediate Corner Posts End Posts Posts are 120 x 124m with two 54 x m slots for panels. Certain conditions Post i.e. strong winds call for stronger 2.7m l l l posts or for them to be dug deeper into 3.0m l l l the ground - if you 3.3m l l l have any queries 3.6m l l l please ask for advice 3.9m l l l Style - A: for use with 75 x 75mm posts B1: for use with 100 x 100mm posts B2: for use with 125 x 1m posts C: for use with 100 x 100mm posts D: for use with 75 x 75mm posts E: for use with 75 x 75mm posts F: for use with 100 x 100mm posts K: for use with 100 x 100mm posts l l l l BM l BM l BM l BM l Stainless Steel Self-Drilling Countersunk Torx Head Screw Pack of mm l A B1 & B2 C Square Section Panel Posts (page 46) Planed finish (not slotted). These are standard square section posts without the unique slot that our superior slotted Jakposts have. Standard Panel Posts : 70 x 70mm nominal Fence 0.6m 0.9m 2.1m Gravel Boards (page 49) 1.83m long 150 x 28mm with 22mm packers l 2.40m long 150 x m l Post 2.1m 2.7m Buy Online: or Call: for Sales or Advice n l l l l l D E F K Heavy Duty Panel Posts : 91 x 91mm nominal Jakcured posts for hanging light gates etc. Certain conditions i.e. strong winds call for stronger posts or for them to be dug deeper into the ground - if you have any queries please ask for advice Post 2.1m 2.7m 3.0m 3.3m 3.6m n l l l l l l l l All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website

9 Capping for Panels Weathered Two Ways (page 50) Heavy Duty Capping Rail (page 51) 1.83m x 65mm x 35mm l Standard Capping for Panels (page 51) Planed timber with 2 rounded edges 1.88m x 120 x m l 2.01m x 120 x m l (to be cut to suit ends & corners) Jakoustic Acoustic Barriers (page 52-55) Barbican Imperial Residential Railings (page 56-57) Railings Galv. & PPC 1. Intermediate Posts 1. d by quotation, please ask m m m m Sentry Residential Railings (page 56) Railings Galv. & PPC m m Intermediate Posts m m For intermediate slotted posts 1.900m x 145 x 35mm For end and corner slotted posts 1.985m x 145 x 35mm Corner Posts 1. End Posts 1. Corner Posts 1. End Posts 1. l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY m m m m m m m m Bow Top panels and Gates (page 59) (Timber Playtime Panels - on Application) Bow Top Panels Bow Top Gates Panel 1m high m P.O.A Single gate 0.9m wide high m P.O.A 1m high Posts for panels high 1m high m P.O.A Double gates 3m wide high m P.O.A 1m high Connector (4 /panel) m P.O.A high H n H n Finials Finial 1 Finial 2 Finial 3 Finial 4 Finial 5 Finial BM m BM m m m Connectors m Bow Top is galvanised as standard, please ask about coating prices. Capping Rails and Metal Railings - Pages

10 Playtime Timber Fencing & Gates (page 59) d by quotation, please ask. EuroGuard Regular Panels (page 61) EuroGuard Panels Galvanised as standard, please ask about coating prices. Width 1.50m 1.80m 2.00m 3.00m 3.00m 3.00m m m m P.O.A P.O.A P.O.A EuroGuard Posts 2.1m 2.5m 2.8m Clips for fixing (3 per post) Driving tool for screws Fence height 2.0m m m m BM m m P.O.A P.O.A P.O.A P.O.A P.O.A EuroGuard Combi (page 61) P.O.A - On Application EuroGuard Combi (3.0m wide) Panels (inc panels & slats) 1.58m S n P.O.A 2.00m S n P.O.A Posts (inc posts, covers & 6 connects) 2.0m 2.5m S n S n P.O.A P.O.A Fixing Tool P.O.A - on application Garden Gates - Pages Featherboard Gates (page 62) Featherboard Gates (Level Top) Gate 1.18m 1.48m 1.78m 1.78m 1.93m Gate Width 900mm l l l l m Concave Featherboard Gates Gate 1.15m 1.45m 1.75m Gate Width Convex Featherboard Gates Gate 1.15m 1.45m 1.75m Gate Width m m m m m l Brook Gate (page 63) Gate 1.18m 1.48m 1.78m 1.78m 1.78m 1.93m Gate Width 750mm 900mm m m l l l l Brabourne Gate (page 63) (Convex Top) Gate 1.15m 1.45m 1.75m 1.75m 1.75m Gate Width 750mm 900mm m m l l l All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website 8 All s Exclude VAT Buy Online: or Call: for Sales or Advice

11 J-Lock and Latch (page 64) J-Lock fitted J-Lock supply only BM m BM n Wall Plates (page 63) Planed Finish 2.1m Planed Finish Planed Finish Planed Finish 95 x 70mm 95 x 70mm 95 x 70mm 95 x 45mm l n n l Hit and Miss Gates Vertical (page 64) Gate 1.78m Right handed 1.78m Left handed Gate Width l l Hit and Miss Gates Horizontal (page 64) Gate 1.78m Right handed 1.78m Left handed Gate Width m m Paliframe Gates (page 64) Gate 1.78m Right handed 1.78m Left handed Gate Width l l Venetian Gates (page 65) Gate 1.78m Right handed 1.78m Left handed Gate Width l l Chilham Gates (page 65) Gate 1.78m Right handed 1.78m Left handed Gate Width l l Canterbury Combi Gates (page 65) Gate 1.78m Right handed 1.78m Left handed Gate Width m m Woven Gates (page 65) Gate 1.78m Right handed 1.78m Left handed Mitre Gates (page 25) Gate 0.95m Right handed 0.95m Left handed 1.15m Right handed 1.15m Right handed Gate Width m m Jakcure End Grain Treatment Where cutting or drilling after treatment cannot be avoided use Jakcure End Grain Treatment to ensure no timber is left untreated. 500g bottle Gate Width l m m m m Garden Gates - Pages l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY t WHILE STOCK LASTS i INCLUDES BOLTS AND SCREWS 9

12 Square Top Standard Trellis Gates (page 66) Gate 1.78m Right handed 1.78m Left handed Gate Width m m Premier Trellis Gates (page 66) Gate 1.78m 100mm Square Lattice Diamond Gate Width m m m Garden Gates & Pergolas - Pages Jaktop Gates (page 66) Gate 0.86m 1.15m 1.75m 0.86m 1.15m 0.86m 1.15m Centre Gate Stop Gate Width 1.20m 1.20m 1.50m 1.50m Pergola Systems (page 71) Pergola Item A: Short Cross Member 0.57m B1: Long Cross Member B2: Long Cross Member 2.1m B3: Long Cross Member B4: Long Cross Member 2.7m D: Spacer Block F: In Line Brace 0.5m G: Corner Brace 590mm H: Post 91 x 91mm J: Post Top K: Mid Side Rail 1.92m L: End side Rail 2.174m M: Double End Side Rail 2.42m Pergola Pack PERGOLA l l l l l m m n n n n n n n n n l n n n n Pergola Calculator Single Pergola Double Pergola Width 2.10m 2.40m 2.70m Fixings pack 1 Bay Bay Palisade Gates Rounded Pale tops (page 66) Gate 0.95m 1.15m 1.75m Gate 0.95m 1.17m 1.75m Post Gate Width Rounded Tops l l n l l n Palisade Gates Pointed Pale tops (page 66) Gate 0.95m 1.15m 1.75m Gate Width l l m Bays Bays Palisade Gate Posts (page 66) & are 100 x 75mm & are 125 x 75mm section (not morticed). 3 Bays Bays Extra Bays Extra Bays (3x panels) BM m (2x panels) BM m Pointed Tops l n m Corner Pergola (page 69) All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website. 10 All s Exclude VAT Buy Online: or Call: for Sales or Advice

13 Trellis - Pages The Premier Trellis Range (page 74) Trellis Panels Panel framing is 45 x 51mm with 25 x 12mm battens. (100mm squares) 300mm 430mm 560mm 810mm 940mm 1190mm 1320mm 1450mm 1570mm 1830mm Width 1830mm 1830mm 1830mm 1830mm 1830mm 1830mm 1830mm 1830mm 1830mm 1830mm Premier Lattice Wing Panel 560 x 940mm (38mm squares) Item Pair BM m Left handed single panel m Right handed single panel m Premier Concave Topper Panel (100mm squares) 1830 x 560mm at ends l m l m m m m m m l m Standard Trellis Range (page 75) Standard Square Topper Panels 0.3m high l 0.6m high l Standard Square Trellis Panel 0.86m 1.18m 1.50m 1.83m Holes n n n l Curved Framed Trellis 1.83m wide x 300mm high diamond trellis Lattice Panels Panel framing is 45 x 51mm with 25 x 12mm battens. (38mm squares) Width 300mm 1830mm 430mm 1830mm 560mm 1830mm 810mm 1830mm 940mm 1830mm 1190mm 1830mm 1320mm 1830mm 1450mm 1830mm 1570mm 1830mm 1830mm 1830mm l m m m m m m m m l Premier Trellis Wing Panel 560 x 940mm (100mm squares) Item Pair Left handed single panel Right handed single panel Diamond Trellis Panels Panel framing is 45 x 51mm with 25 x 12mm battens. (100mm squares) Width 300mm 1830mm 430mm 1830mm 560mm 1830mm 940mm 1830mm 1190mm 1830mm 1450mm 1830mm 1830mm 1830mm BM m m m Premier Convex Topper Panel 430mm at the ends (100mm squares) 1830 x 560mm at centre m Metal Trellis (page 69) 2m x 700mm Fixings (6 req) Tartan Trellis (page 77) m m m m m m l l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY t WHILE STOCK LASTS i INCLUDES BOLTS AND SCREWS 1.83m m n B n Panel width cut down kits are available for all Premier trellis and Tartan trellis panels, please ask or see the website. Panel width cut down kits are available for all Premier Trellis and Tartan Trellis panels (741300K), please ask or see the website. 11

14 Decking Landscape Timbers - Pages Jakwall Grooved & Ungrooved (page 79) 2.35m x 140mm x 90mm grooved on 90mm face 2.35m x 140mm x 90mm grooved on 140mm face 2.35m x 140mm x 90mm grooved all round 2.35m x 140mm x 90mm not grooved Decking Boards and Fittings (page 80) Decking sizes Heavy decking board 3.0m x 150 x 32mm (nominal) Heavy decking board 3.6m x 150 x 32mm (nominal) Heavy decking board 4.2m x 150 x 32mm (nominal) Heavy decking board 4.8m x 150 x 32mm (nominal) Standard decking board 3.6m x 100 x m (nominal) Standard decking board 4.2m x 100 x m (nominal) Fittings Decking joist 3.0m x 100mm x 50mm Decking joist 3.6m x 100mm x 50mm Decking joist 3.6m x 150mm x 50mm Decking support post 0.6m x 100mm diameter Decking support post 0.9m x 100mm diameter Decking support post x 100mm diameter 60mm stainless steel screw T25 torx drive plus driver bit 60mm stainless steel screw T25 torx drive plus driver bit Stainless steel self drilling screws 60 x 5mm / box tread decking stringer (850mm long) 3 tread decking stringer (1200mm long) 4 tread decking stringer (1530mm long) 5 tread decking stringer (1865mm long) Weed Control Roll 12m roll x 1m wide Weed Control Sheeting 50m roll x 1m wide n n n n l n n l n l l l l n n n l l l n n n n l l Posts, Galvanised Shoes, and Base Boards (page 83) Item 1060mm intermediate Jakpost 1060mm corner Jakpost 1060mm end Jakpost Post for Pergola Topping 2100mm Intermediate post 2100mm corner post 2100mm end post PPC shoe & base plate for Inter (+ screws) PPC shoe & base plate for end/corner (+ screws) 3.9m 120 x 21mm capping & base board long decking spur & packer l l l n n n l l l n Jakwall Fixings 150mm fixing timber screw for hex head 200mm fixing timber screw for hex head Hex bit for 5/16 for timber screw 100mm Screw l l l l Landscape Sleepers (page 79) long 200 x 100mm n Slip Resistant Decking (page 82) 3.6m board SR n Balustrade (page 82-83) Style 1 Balustrade (Pales) 1.1m high panel 1.82m wide panel Post infill piece 2.0m x 50mm x m Capping rail x 60mm 3.9m x 120mm Balustrade Gates 1.0m wide Style 1 Right handed Left handed Style 2 Right handed Left handed l l n l Style 2 Balustrade (Spindles) 1.1m high Width 1.83m n m m m m Style 1 Style 2 Spur Post n Intermediate post Corner post End post Capping & base board All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website. 12 All s Exclude VAT Buy Online: or Call: for Sales or Advice

15 Jak-Deck Kits (page 84) 1.8 x 1.8 x 3.6m 3.6 x 3.6m BM n BM n BM n Venetian Retreat Garden Shelter (page 87) Retreat Shelter Retreat Shelter with polycarbonate roof covering Gutter Kit for rear of optional roof sheet (Inc. gutter & downpipe) Additional side panel (to fill right hand side) 20kg Bag Postcrete Woven Retreat Garden Shelter (page 89) Woven Retreat Shelter Woven Retreat with polycarbonate roof covering Gutter Kit for rear of optional roof sheet (Inc. gutter & downpipe) Additional side panel (to fill right hand side) 20kg Bag Postcrete Wheelie Bin Store (page 91) Wheelie Bin Store (Double) Additional unit bin store (Left hanging door) Single slatted shelf (optional) Cabin hook (300mm) galvanised Sissinghurst Planters (page 93) Square 560 x 560 x 500mm Long 1010 x 560 x 500mm BM m BM m BM m C1 m l BM m BM m BM m m l n m m n n n Decking Pergolas Shelters - Pages l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY t WHILE STOCK LASTS i INCLUDES BOLTS AND SCREWS 13

16 We re proud of the quality of our products, here s one of the biggest reasons why... Not a lot of people realise it, but even though Jacksons is one of the biggest fencing companies in the UK, people are amazed to find that our fencing and gates are hand made. Of course there are parts of the production process that are automated and machinery takes care of some of the cutting and drilling, but it s the hands on approach that makes the difference. Field & Entrance Gates - Pages The Jacksons staff know that what they do is a hugely important part of the process. They are trained to assemble panels and gates with great care, checking every component that passes through their hands, as they run an experienced eye over the timber, noticing blemishes or knots. Anything that doesn t pass our strict quality control procedures and guidelines is taken out to be re-purposed. Nothing goes to waste, and it s this attention to detail and constant watchfulness over quality that is a key part of what makes a Jacksons fence, a great fence. Courtyard Gates (pages 94-95) Standard Courtyard Gates We have a stock of our most popular sizes of the Hythe and the Rye gate below, for any other style or size please ask for a quotation, with no obligation. Gate, width and style A1 high x 3.1m clear opening Rye Courtyard Gate A2 high x 3.6m clear opening Rye Courtyard Gate B1 high x 3.1m clear opening Hythe Courtyard Gate B2 high x 3.6m clear opening Hythe Courtyard Gate Galvanised post for high Rye Courtyard Gate Galvanised post for high Hythe Courtyard Gate Extra over for timber clad posts Mortice lock and lockable drop bolt bracket option Stop post BM l BM l BM l BM l R l l CY/CLAD BM n BM n A1 & A2 B1 & B2 Railing Panel & Cathedral style (page 97) Courtyard Gates d by quotation, please ask. Timber Sliding Gates d by quotation, please ask. (page 99) Hardwood Gates d by quotation, please ask. (page 101) Ornamental Gates d by quotation, please ask. (page 103) Residential Gate Operators d by quotation, please ask. (p. 105) Access Control Options d by quotation, please ask. (pages ) All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website. 14 All s Exclude VAT Buy Online: or Call: for Sales or Advice

17 Entrance Gates for the Drive or Field (page 109) Entrance Gate Gate height high, except for the curved hanging stile that is high Uni-Gates (page 111) Uni-Gate Gates are 1.27m high overall Fitting Packs for Uni and Entrance Gates Items required for hanging a single narrow gate; Galvanised fittings, Hinge set, Spring catch fitted, anti-lift device, padlock & two 2.1m, 150 x 150mm gate posts. TRHSSLN l Items required to hang single gate; Galvanised fittings, Hinge set, Spring catch fitted, anti-lift device, padlock, 2.1m, 175 x 175mm Hanging post & 2.1m, 150 x 150mm Shutting post TRHSSL l Items required for hanging double leaf wide gate (includes loop over, drop bolt & centre gate stop etc.) TRHSDL l Entrance Gate Narrow 0.9m n n m Narrow Uni-Gates 0.9m* 1.05m* 2.1m l l l l l l * with a single brace For gates under 2.1m please use the above code but add an R for a right handed hanging gate option Additional Fitting Packs/Hanging Systems for Uni and Entrance gates Entrance Gate Wide 2.1m 2.7m 3.0m 3.3m 3.6m Wide Uni-Gates 2.7m 3.0m 3.3m 3.6m 3.9m 4.2m For double leaf gates hung behind posts, inc Hinges, Loopover, CGS, Fitting of irons - NO POSTS For single leaf gate hung behind posts, inc Posts, Hinges, Auto catch, Fitting of irons For single leaf gate hung between posts, inc Posts, Hinges, Spring catch, Fitting of irons For narrow leaf Uni or Entrance gate hung behind posts, inc Posts, Hinges, Auto catch, Fitting of irons For narrow leaf gate hung between posts, inc Hinges, Spring catch, Fitting of irons For single leaf gate hung behind posts, inc Hinges, Spring catch, Fitting of irons - NO POSTS For single leaf gate hung behind posts, inc Hinges, Auto catch, Fitting of irons - NO POSTS For single leaf gate hung between posts, inc Hinges, Spring catch, Fitting of irons - NO POSTS Automation - All gates featured on this page can be automated with adjustment please call: for a quotation m m m m n m n l l l l l l l TRHSDLNP l TRHSSLAC l TRHSSLBP l TRHSSLNAC l TRHSSLNBP l TRHSSLNP l TRHSSLNPAC l TRHSSLNPBP l Field and Entrance Gates - Pages STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY t WHILE STOCK LASTS i INCLUDES BOLTS AND SCREWS 15

18 Galvanised Fittings and Gate Accessories (pages ) Gates and Fittings - Pages Item Spring Catch Set Spring Catch Set alternative item Hinge Set with adjustable bottom hinge for wooden posts supplied with anti-theft nuts Hinge Set with hooks to build into brickwork Hinge Set with double swing rockerbottom hinge for wooden posts Pair Hooks on 100mm plate 19mm pin Pair of Hinge Hooks for concrete or wooden posts from mm (extra long) Wrought Heavy Latch for gates with rocker bottom hinge Gate Catch to fix in cement with wear plates Gate Catch with wooden stump and wear plates x 100 x 100mm to support full height of gate and catch on 2nd rail down for use on Entrance and Uni- Field gates Self closing adjustable hinge for timber gate Self closing adjustable hinge for steel gate The Vertical Pull Latch is ideal for gates that need to always be closed, for example swimming pool gates and where you need to confine pets,only to be operated by an adult l Gate Posts and Gate latches (page 114) Hanging Posts for Field Gates Section 2.1m Fine sawn finish 175 x 175mm 2.1m Fine sawn finish 150 x 150mm Slam Posts Section 2.1m Fine sawn finish 150 x 150mm Gate Posts for Special Gates Section Fine sawn finish 125 x 1m Fine sawn finish 175 x 175mm Fine sawn finish 150 x 150mm 2.7m Fine sawn finish 125 x 1m 2.7m Fine sawn finish 150 x 150mm 2.7m Fine sawn finish 175 x 175mm All s Exclude VAT l BM l l l l l l BM l 1BSLPOST l BM t l l The Extended Pull Latch is the same as the Vertical Pull Latch, but the handle has been extended to ensure toddlers cannot reach the latch l l l l Item Universal Hold Back Catch for wood or metal gates with wear plates Loopover Catch complete with bolt (for connecting two gates) and staple with extra knob Auto Catch with striker Drop Bolt Heavy Lockable Drop Bolt Anti-Lift device for padlock (Not for use with hooks on plates 4384) Fitting irons to gates Gate Latch-GRP General Purpose - 1 way lockable Gate Latch Deluxe 2 Way lockable - rust free, lock from either side of the gate Wall Plates Planed finish 2.1m Planed finish Planed finish Planed finish 2.1m Planed finish Planed finish Centre Gate Stops The Pull Latch is a general all purpose latch suitable for gates that do not require the security of a keyed lock l Section 95 x 70mm 95 x 70mm 95 x 70mm 95 x 45mm 95 x 45mm 95 x 45mm l n n l l l l l l l BM BM l Safety Warning: Jacksons magnetic pull latches are designed to be operated by adults only. Children must be supervised at all times if operating moving parts. 450 x 115 x 150mm l l l For use with entrance and uni-gates Courtyard gates 65mm Featherboard and boarded gates n l n l l l All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website. Buy Online: or Call: for Sales or Advice

19 Heavy Metal Field Gates (page 115) Standard un-clad Clad with welded mesh 2.1m 2.7m 3.0m 3.3m 3.6m 4.2m 4.6m m m m m l l l l l m 2.7m 3.0m 3.3m 3.6m 4.2m 4.6m Drop bolts and Loop over catches Item Drop bolt Loop over catch l l BM m BM m BM m BM m BM m BM m BM m BM m BM m Estate Railings (page 117) Panels and accesories 2m wide x high panel End post for cut back panel M8 x 65 coach bolt (2 per panel) Estate Gates long 3.0m long 3.6m long Hanging Posts 1.875mm long 89mm Diam mm long 114mm Diam. Special Heavy Post & Rail and Standard (nailed) Post & Rail (page 119) Special Heavy Post and Rail Fencing Posts Corner Posts Mortices Mortices 3 Mortices n Mortices 2.3m 4 Mortices m m 4 Mortices Standard Post and Rail Fencing (nailed) (page 121) Machine rounded, half-round Posts 115mm face 1m face 1m face l l l Post and Rail Fencing (nailed) Posts l 2.1m l Post and Rail (morticed) and Post and Rail (nailed) Post and Rail Fencing (morticed) Posts Mortices 3 Mortices l m 4 Mortices m Corner Posts Machine Rounded l l n m l m m m m BM m BM m BM m Slam Posts Item 1.9m long 88.9mm Diam. Rails 2.0m l n Guide 3 rail per m rail per m Machine rounded, half-round Rails Item 3.6m 100mm face l Example: 180m comprises: 180m with 100mm machine rounded rails & posts. 3-rail (100 posts + 1 for the end of each run +150 rails). Guide price per m Square Rails 3.6m long l 8.95 Half Round Rails 3.6m long with 100mm face l Example: 180m comprises: Three rail: 100 posts + 1 for the end of each run. 150 rails. Guide price with sawn rails or price with 100mm machine rounded Corner Posts 2.1m Mortices 3 Mortices 4 Mortices Square Rails 3.0m l l m Prick Posts long long l m 5.65 Guide 3 rail per m rail per m Agricultural Fencing - Pages : l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY t WHILE STOCK LASTS i INCLUDES BOLTS AND SCREWS 17

20 Containing Boards 3.6m x 38mm 4.0m x 38mm Splash Boards 3.6m x m l l l Square Rails Sawn Finish 100 x 38mm section. 4m long l Jumping Poles 3.6m long x 100mm diameter l Agricultural & Wires - Pages Chain Mesh Fencing (page 124) Posts Half round softwood, machine rounded and pointed 1m across the face l 9.20 Chain Mesh 50mm mesh. Line wire is supplied with each roll. Supplied in rolls, height 0.9m, 2.5mm gauge l Fencing Stakes and Posts (page 125) Stakes Softwood mixed cleft & round mm across or through the butts, peeled, pointed. 1.65m n n Anchor Stakes Half round with min of 75mm face, peeled mm n 1.20 Wire Netting Galvanised to BS EN (page 126) Mesh Wire Metre Rolls Gauge m l mm l mm l l Corner Posts Two sawn flat sides from round posts of 1m diameter l Machine Rounded Fencing Stakes Pointed, with chamfered tops. 75mm dia. long 1.65m long long 90mm dia. 1.65m long long l l l l l Half Round Rails Half round, machine rounded 100mm across face. 3.6m l 9.85 Example: 200m comprises: 112 posts, 56 rails, 8 rolls chain mesh, 3kgs. Staples, 4kgs. 100mm Nails, 1 box of galvanised ring clips Guide price per m Struts Machine rounded. Min diameter of 60mm l n l l n l Straining and Corner Posts Round and peeled. 2.3m long x dia. 150mm 2.7m long x dia. 150mm Machine rounded 2.1m long x dia. 150mm long x dia. 150mm l l All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website n n n n l All prices exclude VAT Buy Online: or Call: for Sales or Advice

21 Barbed Wire (page 126) Double strand, 200m with barbs at 100mm centres Gauge 200m 2.5mm 200m 1.6mm High tensile l l Plain Wire Mild steel galvanised (page 126) 25kg coils 5.00mm(6g.) 4.00mm(8g.) 3.15mm(10g.) 2.5mm(12g.) 2.0mm(14g.) Approx 162m 254m 410m 651m 1017m q l l l l mm(16g.) High Tensile 1590m q mm(10g.) 2.5mm(12 1 2g.) 410m 651m l l kg coils 3.15mm (10g.) 2.50mm (12g.) 2.00mm (14g.) Actual size Approx 82m 130m 203m 5.00mm 3.15mm 2.0mm l l l 4.00mm 2.5mm 1.6mm Cattle or Stock Fence 1.15m (Double Life Galfan coated) (page 127) Available in medium weight. Eight line wires and uprights 300mm apart. Type C8/11/ l Gauge - Top & Bottom 3.0mm Pig Fence 800mm (Double Life Galfan coated) (page 127) Eight line wires and uprights 150mm apart Type Medium C8/80/15 High Tensile HT8/80/15 Gauge - Top & Bottom 3.0mm Gauge Intermediate 2.5mm (50m rolls) l l all wires 2.5mm (100m rolls) Sheep Fence 900mm (Double Life Galfan coated) (page 127) Six line wires and uprights 300mm apart. Type Heavy B6/90/30 Medium C6/90/ l l Tree and Netting Stakes (page 128) Buckle Tree Ties 450mm l 0.70 Gauge - Top & Bottom 4.0mm 3.0mm Gauge Intermediate 2.5mm (50m rolls) Gauge Intermediate 3mm (50m rolls) 2.5mm (50m rolls) Forest Fence 1.0m (Double Life Galfan coated) (page 127) Seven line wires, uprights 150mm apart. Type Medium C7/10/ l Gripples (page 127) Grippler Wire Tensioning Tool l Gripple for Mild steel barbed wire l 1.35 Gauge - Top & Bottom 3.0mm Gauge Intermediate 2.5mm (50m rolls) Deer Fence 1.9m (page 127) High Tensile (100m rolls). Vertical wires 150mm apart for perimeter fencing. Type 60mm Diameter Pointed and chamfered 2.1m High Tensile 13/190/15 (close uprights) m l n l l Gauge - Top & Bottom 2.5mm Gauge Intermediate 2.5mm Gripple Wire Joiner Ideal for joining both Mild & High Tensile steel wire 1.6mm-3.2mm & High Tensile barbed wire l 75mm Diameter Pointed and chamfered 2.1m 2.7m l l l Agricultural and Wires - Pages l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY t WHILE STOCK LASTS i INCLUDES BOLTS AND SCREWS q SUPPLIED TO ORDER (CANNOT BE CANCELLED ONCE ORDERED We reserve the right to alter specification in accordance with our policy of continuous improvement. 19

22 Agricultural and Demarcation - Pages Cleft Chestnut Fencing (page 129) Please note: Cleft Chestnut Fencing is not Jakcured timber. Fence Intermediate Posts Machine round 75mm diameter use at 2.7m intervals Fence Post 0.9m l l m l l m l m l n m l l l 5.95 Style A 9.1m rolls 0.9m 1.1m Style B 9.1m rolls 0.9m 1.1m Style B 4.55m rolls 1.4m Kissing Gates (pages ) Standard timber Kissing Gate A Complete set Mobility timber Kissing Gate B Complete set Metal Kissing Gate Complete set l l l n Stiles and Bridle Gates (page 132) Stile BM n BM n Jacksons Galvanised Metal Kissing Gate Sag Hook Item Stile complete with dog gate Stile (without dog gate) Dog gate for attaching to existing stile All s Exclude VAT BM m l BM m BM m BM m Anchor Stakes Half round with minimum of 75mm face, pointed and peeled. One per strut mm n Padlock Item RADAR padlock and three keys A Corner and End Posts Machine rounded 100mm diam. Use at max 45m intervals or corners & changes in direction. Fence 0.9m & 1.1m & 1.4m Post 2.1m l l l l Struts Machine rounded 60mm diam. Use one on end posts & two on corner & intermediate straining posts. Fence 0.9m & 1.1m & 1.4m Post 1.4m 2.1m n l n n BM Bridle Gates 1 x wide Universal Gate, 1.3m high overall 2 x 2.1m hanging posts 150 x 150mm, sawn finish 1 x Hinge set with adjustable bottom hinge 1 x Spring catch set galvanised Fitting irons to gate. When ordering please state either right or left hand hanging BM n Two Way R.O.W. Latch Two way latch especially suitable for self closing gates for disabled access. Supplied complete with latch timber packer and activating pin n B All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website. Buy Online: or Call: for Sales or Advice

23 Demarcation Devices and Landscape Timbers (page 133) Posts 0.9m long long Post and Chain Fencing Silver Rail Fencing Diamond Rail Fencing Timber Poles & Bollards (pages 134) C D 150mm n n 175mm m n 200mm 150mm m n 175mm m n A B C D n n Posts for Chain Fencing Jakcured Softwood 100mm square section, planed shaped top n Chain galvanised 50mm x 6mm links spikes in every other link price per metre l Intermediate Post Corner Post End Post Rails 6m Galvanised rail (4m diam. inc. connector) A Machine rounded & chamfered B Machine rounded & grooved C Square with shaped top D Square with shaped top & grooved Rails 75 x 75mm nominal section 2.7m (posts at 1.35m centres) 75 x 75mm nominal section (posts at centres) Galvanised Strap for Diamond Rail n m n BM l l m l l l Hooks galvanised for attaching chain to wooden posts (including screws) l m 2.1m 3.0m 3.6m 6.0m Bollard A 75mm m m mm l l l l l l m m m m m m l l mm m m m m m l l l mm l B 150mm m m m l l KEY: l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY t WHILE STOCK LASTS i INCLUDES BOLTS AND SCREWS lectors Complete with fixings Colour Amber White Red l l l Agricultural and Demarcation - Pages

24 Metal Bollards (page 135) Bollard 1.4m x 101mm dia type K domed top 1.4m x 101mm dia type L sloped top m m Base plated posts are available at an extra cost. Metal bollards are supplied galvanised as standard. Powder coating is extra, please ask for details Demarcation and Security - Pages Metal Bollards E Domed top F Pyramidal top H Gold Dome top J Silver Dome top Page Verge Protection Marker Posts, Car and Lorry Stops and Barriers Security Rail (or fixed hoop barrier) l 178 x 5mm 100 x 100 x 3mm 178 x 5mm 178 x 5mm The Warden 3-9m (18m double) Single barrier up to 4.4m Barriers 4.5-6m Barriers 6.1-8m Verge Protection Marker post Posts come complete with either amber, red or white reflectors. Installed height 600mm m m m Cobra Spike & Security Comb (page 137) Cobra-Spike Standard Spikes 110mm long. Pitch of spikes 80mm. Depth of spikes 95mm. Cobra-Spike Standard Galvanised Galv. and coated m m m m Post with either: Amber reflector Red reflector White reflector l l BM l BM l BM l E F H J Danger Signs l 3.30 High Tensile Barbed Wire Best Jacksons galvanised barbed wire. Twin strand made to B.S.S. Security Comb s: Supplied in lengths. The double row of spikes is 40mm wide and depth of spikes m. Fixing: Security Comb comes drilled ready for fixing. lengths Galvanised Security Comb Galv. & coated Security Comb lectors Complete with fixings Colour Amber l White l Red l 200m 1.6mm l m l All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website. 22 All s Exclude VAT Buy Online: or Call: for Sales or Advice

25 Security Extras: Rota-Spike and Viper-Spike (page 138) Rota-Spike Security Toppings Rota-Spikes sold in 6m lengths (shorter lengths available) comprising: 6m galvanised rail Rota-Spikes for 6m End wall bracket Intermediate bracket Mitre corner BM l l l l l Viper-Spike Security Toppings Item Viper 1 (1.1m lengths) Viper l l Security Extras: Barbed Tape (page 139) Razor Wire Concertina Specification Coil diameter Approx. coil length Extended diameter Spirals turns per coil Clips per spiral 450mm 8m 400mm 54/ l mm 10-12m 620mm 54/ l Express Temporary Fencing (page 140) Temporary Fencing Anti-Climb Heavy Duty Anti-Climb Standard Pedestrian gate 2m high x 1m wide 1m high crowd control barrier Accessories Fence coupler - 2 per panel std Gate Hinge Anti-Lift Device Barbed Wire Extension l l l q l l l l 980mm 10-15m 820mm 54/ l Flat Wrap Barbed Tape Coil 500mm 700mm 900mm Approx. Coil 12m 14m 14m l q q Rolls of Barbed Tape Medium, 200m l Please note: Express Temporary Fencing is not covered by the 25 Year Service Life Footings Concrete Foot Thermoplastic foot* Double Metal Foot Fence Stabiliser l l q l *Thermoplastic foot replaces previous plastic foot filled with concrete l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY t WHILE STOCK LASTS i INCLUDES BOLTS AND SCREWS q SUPPLIED TO ORDER (CANNOT BE CANCELLED ONCE ORDERED We reserve the right to alter specification in accordance with our policy of continuous improvement. Security - Pages

26 Galvanised Tubular Systems - Pages Galvanised Tubular Fencing System (pages ) System 1 Medium Intermediate posts Fence 0.9m 1.4m System 1 Heavy Intermediate posts End posts Corner - 2 way posts Fence 0.9m 1.4m 2.0m BM BM BM BM BM GALV PPC BM BM BM BM BM GALV PPC BM BM BM BM BM GALV PPC m BM BM BM BM BM BM m BM BM BM m BM BM BM System 2 Fence 2.0m 2.75m 3.05m 3.6m System 3 Fence 0.9m 1.4m 2.0m 2.75m 3.05m 3.6m BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM GALV Systems 4, 5 and 6 continue on next page All s Exclude VAT PPC Intermediate posts End posts Corner - 2 way posts GALV PPC GALV PPC GALV BM BM BM BM BM BM BM BM BM BM BM BM Intermediate posts End posts Corner - 2 way posts GALV PPC GALV PPC GALV BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM PPC PPC Key GALV = Hot Dipped Galvanised PPC = Polyester Powder Coated Buy Online: or Call: for Sales or Advice E B B B B B System 3 C System 1 A A G B B B C D A A A System 2 A A A

27 Galvanised Tubular Fencing System continued System 4 Intermediate posts End posts Corner - 2 way posts Fence GALV PPC GALV PPC GALV PPC BM BM BM m BM BM BM BM BM BM m BM BM BM m BM BM BM m BM BM BM System 5 Fence 2.0m 2.75m 3.05m 3.6m System 6 Fence 2.0m 2.75m 3.05m 3.6m Intermediate posts End posts Corner posts BM BM BM BM BM BM BM BM BM BM BM BM A - line wire clip Top Rail 6m with connector GALV PPC BM BM BM BM BM BM GALV PPC Key GALV = Hot Dipped Galvanised PPC = Polyester Powder Coated BM BM BM BM BM BM GALV way posts PPC BM BM BM BM BM BM GALV Intermediate posts End posts Corner posts 2 way posts GALV PPC GALV PPC GALV PPC BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM BM B - stretcher bar/ferrule winder assembly E - top rail & stretcher bar assembly F - post cap BM C - strut connection assembly Galv D - barbed wire straining with ferrule winder G - T cap top rail system BM PPC GALV PPC l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY t WHILE STOCK LASTS i INCLUDES BOLTS AND SCREWS E B B D System 4 A A H - vertical extension I - cranked extension J - Y top end post top rail & stretcher bar assembly K - struts for securing cranked extensions at ends and corners H PPC E B B B B D K System 5 J System 6 All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website. A A A A J Security Chain Link and Miscellaneous - Pages

28 Galvanised Tubular System - Pages Tubular Gate System (page 145) Chain Link Gates Gate 0.86m 1.17m 1.32m 1.78m Plastic Coated Infil m high tennis court gate made in a frame for easy installation fitted with an integral key lock Galvanised Infill BM Chain Link Galvanised - 50mm Mesh Inc Line Wire (page 146) Roll Standard No. of Line Wires Wire Gauge 2.5mm 3.0mm 3.55mm g g 9 1 2g 12.5m 12.5m 12.5m 0.9m l 3 1.4m 3 3 Tubular Tennis Court Surrounds Items Post Top Rail Tennis Court Gates Chain Link Tying wire Corner Posts 2.0m 3 4 Single Court Total m 5 Double Court Total l l l l q l q q q l l l l q q q q q q q Chain Link Galvanised PVC Coated - 50mm Mesh Inc Line Wire (page 146) Roll 0.9m 1.4m Standard No. of Line Wires Wire 1.7/2.5mm (Green only) 2.24/3.15mm /10 1 2g. 2.5/3.55mm 12/9 1 2g. 3.0/4.0mm /8g. 10m 12.5m 12.5m 12.5m l l l l q l l l l q l l l q q l l l l l q q /4.75mm 9 1 2/6 1 2g. 12.5m q q q q q q q q All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website. All s Exclude VAT Buy Online: or Call: for Sales or Advice m l m m m q q l q q l q q l l q

29 Welded Mesh Heavy and Light (page 147) Welded Mesh (Light) 6m Roll 900mm 900mm 900mm 30m Roll 900mm 900mm 900mm Mesh (mm) 13 x x x 25 Gauge Chain Link Accessories (page 149) Stretcher bar kits (1) 0.9m 1.4m Mesh (mm) 13 x x x 25 Gauge l l l l l l Stretcher bars hot dip galvanised (2) 900 x 5mm 2 holes 1050 x 5mm 2 holes 1200 x 5mm 3 holes 1400 x 5mm 3 holes 1500 x 5mm 3 holes 1800 x 5mm 3 holes 2000 x 5mm 3 holes 2100 x 5mm 3 holes 2400 x 5mm 4 holes 2750 x 5mm 5 holes 3000 x 5mm 5 holes No. of Angle Cleats, Eyebolts, Adaptors & Hex bolts per bar l l l l l l l n l l l BM l BM l BM l BM l Welded Mesh (Heavy) 0.9m 0.9m 0.9m 2.67m 0.9m 0.9m M8 x 40 (supplied in 100s) 40 x 40 x 5mm 50 x 50 x 6mm Galvanised Eye Bolts (5) 200 x 10 mm l 300 x 10mm l 300 x 12mm l Mesh (mm) 50 x x x x x x x x x x x x x x x x x x x x x x x 50 Bolts for stretcher bars with 2 nuts galvanised (3) Galvanised Loop Adaptors for 10mm Eye Bolts (6) l l Galvanised Angle Cleats (4) l l Wire 2.5mm 3.0mm 3.1/2.5mm 2.5mm 3.0mm 3.1/2.5mm 2.5mm 2.5mm 3.0mm 3.0mm 3.1/2.5mm 2.5mm 3.0mm 3.0mm 3/3.5mm 3/3.5mm 3/3.5mm 3/3.5mm 3/3.5mm 3/3.5mm 3/3.5mm 3/3.5mm 3/3.5mm 3/3.5mm of Roll 12.5m 12.5m 12.5m 12.5m Tying Wire 1kg Coils Line Wire PVC coated green 25kg 2.24/3.15mm 2.50/3.55mm 3.00/4.00mm 3.55/4.75mm 710m 550m 420m 280m l l l l Finish Galv. Galv. Green PVC Galv. Galv. Green PVC Galv. Galv. Galv. Green PVC Galv. Galv. Galv. Galv. Green PVC Green PVC Green PVC Green PVC Black PVC Black PVC Black PVC Green PVC Black PVC l l l l l l l l q q l l q q q q q q q q q q q Strainers Galvanised (7,8,9) Type G Ratchet - Heavy duty q H Radisseur - Large q I Ferrule l Barbed Wire Stays (10) 710mm x 30mm x 6mm. Galvanised & notched for 3 rows of barbed wire l m l l l q KEY: l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY q SUPPLIED TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) Type 16g.(1.6mm) 14g.(2.0mm) Galvanised 62m Green PVC coated 70m l l Security Chain Link and Miscellaneous Pages

30 Fixing Tools and Miscellaneous - Pages Fixing Tools and Miscellaneous (page 150) Jakclips (1) l 3.95 Ballast 20kg bag l 2.30 Postcrete 20kg bag l 4.65 Mastercrete (3) 25kg bag l 9.95 Standard cement 25kg bag l 4.95 Countersunk Supascrews (5) 40mm 45mm 50mm 65mm 75mm mm mm 5mm 5mm 5mm 5mm Bolts & Nuts Cup Square Galvanised (4) M l l l l l l l l Per l l l l l M l l l l l l l l l l l Per l l l l l M l l l Jakcured Timber Spur Posts (2) n Coach Screws Square (6) Chamfered head Gimlet Point 65mm 75mm 90mm 100mm M l M l Roofing bolts - Galvanised (7) Diam. M8 40mm per l Heavy Iron Washers - Metric Galvanised (8) Bolt M6 M8 M10 M12 O.D.mm Approx. Thickness 2.0mm 2.0mm 2.0mm 2.5mm Stainless Steel Nails 1kg Bag 50mm l Jakcure End Grain Treatment Where cutting or drilling after treatment cannot be avoided use Jakcure End Grain Treatment to ensure no timber is left untreated. 500g bottle Per l l l l l Per l l l kg Box l All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website. 28 All s Exclude VAT Buy Online: or Call: for Sales or Advice

31 Fixing Tools and Miscellaneous (page 151) Galvanised Staples (1) mm 20 x x x 4.00 Approx Count per kg kg Carton l l l Galvanised (Barbed) Staples (2) 30mm x 3.15 Approx Count per kg kg Carton l Fixing Tools and Misc (continued) Wire Nails (Galvanised Wire) (3) 50mm 65mm 75mm 100mm 1m 150mm Approx Count per kg kg Carton l l l l l l Resin Anchor (4) l Resin Applicator (5) l Studding (6) Inc 7 nuts & washer per metre Type M8 M10 M12 M l kg Tub l l l 5kg Tub l 5kg Tub l l l l l l Steel Locking Bars (7) 300mm l Arris Rail Repair Brackets (8) 300mm l Heavy Cross Bolt (9) 450mm l i kg Tub l l l 1kg Tub l 1kg Tub l l l l l l Gate Return Spring (11) 250mm Epoxy Black l Lift Gate Hook (12) With coach screws to take 38mm rails l i Monkey Tail Bolts (15) 1 2 Brenton s Pattern Galvanised Bolts (10) No. of Screws/ Bolts 150mm 200mm 250mm 300mm 4/4 4/4 4/4 4/ li li li li Tee Hinges (16) of tail per pair Padlocks (13 & 14) A Padlock 60mm Also available RADAR padlock with 3 keys see page mm l i x 16mm 400mm l i l BM l 450mm l i mm l i Fixing Tools and Miscellaneous - Pages KEY: l STOCK ITEMS m MADE TO ORDER (CANNOT BE CANCELLED ONCE ORDERED) n CHECK FOR AVAILABILITY t WHILE STOCK LASTS i INCLUDES BOLTS AND SCREWS 29

32 Fixing Tools and Miscellaneous (page 152) Fixing Tools and Miscellaneous - Pages Ring Latches Galvanised (1) Both with two ring handles Item Heavy 1m Extra Heavy 175mm Fixing Tools and Misc Claw Hammer (1) Wire Tying Tool (2) Wire Tensioning Tool (3) l l l Post Level (5) l l i l i Monkey Hole Borer (6) 150mm diameter 2m diameter Automatic Latch (2) li 3.25 Pad Bolt (3) l l Grubbing Mattock (9) 5lb. (Head only) l Sledge Hammer (11) Square Rammer (12) 10lb. 10lb. Head l l Wire Ties Galvanised (4) per mm wire 100mm Galvanised 200mm Galvanised Post Driver (7) Item No. 5 for posts up to 120mm diam. No. 6a for posts up to 146mm diam. (two handles) Hickory Mattock & Pickaxe Handle (10) 900mm l Grafting Spade (13) l Ring Gun (5) Jackson Heavy Duty Hand 100mm li 3.70 Ring Clip Gun (7) Non rust aluminium clips l (8) Box of 2, Heavy Reversible Hinges (11) l mm 620 x x x 19 per pair Cranked folded eye 400mm per pair l i l i l i Hook & Band Hinge (12) l i Adjustable Hook & Band Hinge (13) 400mm 400mm 500mm 700mm Per Pair l i Per Pair l i l i l i Cabin Hook (4) 100mm li 150mm li l Fencing Pliers (14) l l l l l Spade Rabbiting - Telecom (14) 124mm x 320mm l Heavy Duty Shovholer Hole Digger (15) Crowbar Chisel & Point (16) Post Maul (17) l l l Ring Fasteners (6) In packs of 1000 Welded Mesh Clip Tool (9) Welded Mesh Clips (10) l Wire Cutters (15) Items as described on page 155 A B C l l l Item Galvanised Stainless Steel In box of l l l All prices were correct at the time of printing, but due to fluctuating raw material costs we reserve the right to alter prices. The latest product prices can be found on our website. (14) 30 All s Exclude VAT Buy Online: or Call: for Sales or Advice

33 You can access information, order online, or try our Fence Builder to help you work out what you need for your next project. At Jacksons we are always happy to hear from our customers, in fact we take a pride in being able to assist you with any query you have regarding your fencing or garden project, or any other part of our service. We have gathered up many of the most frequently asked questions or FAQs on our website for you access at any time. If you want to try the Fence Builder, look at the top of the home page and it s within the main menu under calculators and specifiers. Obviously we re still here to answer any of these queries too, during our normal business hours. 31

34 Metric / Imperial Conversion Chart* mm inch /4 1 1 / / m ft & inches / / / / / / m 6m 9.1m 10m 12.5m 30m Roll s 15 ft/5 yds 20 ft 30 ft/10 yds 32 ft 41 ft 82 ft 98 ft Wire Gauges - Galv 1.6mm 2.0mm 2.5mm 3.0mm 3.15mm 3.5mm 4.0mm 5.0mm Wire Gauges - PVC coated 2.24/3.15mm 13 1 /2/10 1 /2g 2.5/3.55mm 12 1 /2/9 1 /2g 3.0/4.0mm 10 1 /2/8g 3.55/4.75mm 9 1 /2/6 1 /2g *The conversions from Metric to Imperial measurements shown here are nominal. If you have any difficulty in working out any dimensions in our brochure or price booklet: please do call More Reasons to Choose Jacksons Fencing Jacksons has achieved certification under the environmental chain-of-custody schemes of both the FSC (Forest Stewardship Council ) and the PEFC TM (Programme for the Endorsement of Forest Certification TM ). 16g 14g 12 1 /2g 10 1 /2g 10g 9 1 /2g 8g 6g 32 The majority of our timber product range can be offered certified under one of these two schemes. The environmental chain-ofcustody which is monitored from forest source, to primary producer sawmills, through to Jacksons, allows us to ensure that all timber used in certified Jacksons products has been sourced from well managed forests and other controlled sources. However, despite the enormous added environmental and social value that this brings, there is no increased price to the customer. (Ask for FSC or PEFC TM certified products).

35 Delivery Charge (per each drop) Mainland - England and Wales south of (and not including) the counties of Cumbria, Durham and Cleveland. National London For orders under add VAT VAT For orders under add VAT VAT For orders over add VAT VAT Local deliveries from our fencing centres are charged at half of the above prices. For order values over 2000 delivery is FREE. Express delivery - 24 and 48 hours can be arranged at additional cost. We shall be pleased to quote competitively for delivery to north of Lancashire/Yorkshire border, Scotland, Ireland, I.O.M., The Orkneys and The Shetlands. For the Channel Islands Please Contact our Distributors: Guernsey Distributor: R H Gaudion & Sons Ltd Tel: Jersey Distributor: J F (T) U Town & Country Tel: Isle of Whight Distributor: County Fencing Please note our drivers are instructed not to take their lorries off the hard road. Jacksons Fencing: Approved Installer Programme Jacksons offers you a nationwide service that you can absolutely rely on. Our Approved Installers have all been carefully selected and are highly experienced professionals who will do the job competitively and without skimping - and get it right! We have developed a Customer Charter for your reassurance of our joint commitment to quality. This Charter establishes the Code of Practice expected from a Jacksons Approved Installer and your expectations from them. A copy of your Charter will be presented to you with your quotation. APPROVED INSTALLER Throughout the process from enquiry to completion of the installation, specific quality procedures must be adhered to by both Jacksons and the Jacksons Expert Installer. These cover all aspects of the installation in accordance with Jacksons instructions and best practices, working competently and responsibly throughout the duration of the contract. Please call with your initial enquiry and we will arrange for a Jacksons Approved Installer to contact you and give you a no obligation quotation. 33

36 The 25 year Jakcure Guarantee The Jakcure process is the ultimate in modern softwood preservation. Untreated woods have always been susceptible to rot and insect attack. The traditional remedy of brushing or dipping creosote or other preservative, only treats the surface, needs repeating frequently and cannot reach the parts underground. The answer is Jakcure. This is the preservative process unique to Jacksons Fencing that penetrates deep through the outer sap wood and into the heart wood. How the Jakcure process works First, all softwood is tested for moisture content - because excess moisture prevents absorption of the preservative. All timber with more than 30% moisture content is kiln dried. This drying process is essential to ensure deep penetration into the wood fibres. The preservative is forced by vacuum/pressure through the outside sap wood deep into the heart wood, where it forms an insoluble compound giving permanent protection against rot and insect attack. The greater the loading of preservative, the greater the protection and a guaranteed longer life Our unique Jakcure process gives us the confidence to back our treated timber products with a 25-year guarantee. Jakcure will not soil hands or clothing and is harmless to man, animal and plant life. It is non-inflammable and non-corrosive. It has no unpleasant odour and does not make timber brittle or reduce its strength. Jakcure exceeds the requirements of BS EN and BS 8417 and provides lasting protection, above and below ground, against all woodboring pests and all forms of wet and dry rot. The Lowest Lifetime Cost The Jakcure treatment process adds 15% to our costs, so Jacksons fencing and gates will cost you marginally more than lesser products, but it will last many times longer, so when you use Jacksons Jakcure treated timber products, you can be sure that they are guaranteed for 25 years without the need for further treatment, which means you only need to buy and erect them once. That s real economy and really good for the environment too. See the difference - the effect of timber drying on the treatment penetration Eight timber posts of the same species are selected as samples. Timber is a natural material and takes up water as it grows. So, when it arrives with us from the sawmill it will be very wet, sometimes with a moisture content in excess of 100% of the weight of the dry wood. Sample A 4 Sample A is then kiln dried to below 28% moisture content Sample B Sample B is left as it is

37 Both samples A and B are vacuum pressure treated identically After treatment, samples A and B are cross cut at more than 300mm from the ends to reveal the actual penetration of preservative achieved. You should note that while both samples look the same superficially, the penetration level of preservative into sample A extends to the heartwood a huge difference to that achieved in sample B. And it s this difference that dictates whether a fence or gate will last for 5 years or 25 years and if any guarantee offered on an inferior product is worth the paper it s written on. Sample A close up Sample A Sample B Sample B close up

38 Jacksons Service: Exceptional Fencing, Gates and Garden Structures Backed by Unrivalled Service Jacksons Fencing is a family run business that was started by Ian Jackson and his father in 1947 which today employs over 250 people in the UK. Peter Jackson, Ian s youngest son, is the Chief Executive. He is passionate about continuing the Jacksons commitment to providing the ultimate in quality, service and value. This commitment is shared by the whole Jacksons team who take care and pride in what they do - it s a Jacksons Fencing tradition. Over the years we have built up a sales and advisory team to be proud of. They are on hand to take your initial enquiry and help you with any further information or advice you might need throughout your purchasing journey with us. In addition to the Head Office in Ashford (Kent) we have two other Fencing Centres, one near Bath and the other near Chester. We also have six experienced Fencing Managers covering the country and can offer a nationwide installation service through our network of Approved Installers. Depending on the nature and location of your project, we will either send you a budget quotation from our Ashford office or hand your details over a regional Fencing Centre. If a site survey is required, one of Fencing Managers or Approved Installers will contact you to discuss your project and arrange to visit you. Installation services - even the finest fences can only be as secure as their installation - so why take chances? Jacksons offer you a nationwide service that you can absolutely rely on. Our Approved Installers have all been carefully selected and are highly experienced professionals who will do the job competitively and without skimping - and get it right. Please call with your initial enquiry and we will arrange for one of our Approved Installers to contact you to give you a no obligation quotation. 6

39 More Reasons to Choose Jacksons Jacksons Fencing has a third party audited Due Diligence System in place to ensure all of its timber products are sourced from verified legal timber sources and hence conform fully to the EUTR (European Timber Regulations) requirements. Jacksons has also achieved certification under the environmental chain-ofcustody schemes of both the FSC (Forest Stewardship Council ) and the PEFC (Programme for the Endorsement of Forest Certification ). The majority of our timber product range can be offered certified under one of these two schemes. The environmental chain-of-custody which is monitored from forest source, to primary producer sawmills, through to Jacksons, allows us to ensure that all timber used in certified Jacksons products has been sourced from well managed forests and other controlled sources. Please ask the Sales Team for FSC or PEFC certified products Quality Management System Jacksons Fencing has a certified Quality Management System that complies with the requirements of ISO 9001 for the design, manufacture, supply and control of installation of timber and steel fencing, gates and security barriers to commercial, trade and domestic customers. Gate Safe: Setting the Standard for Safe Automated Gates Gate Safe is the charity set up in 2010 with the support of Jacksons Fencing following the tragic deaths of two children in separate automated gate accidents. It has launched an official IOSH (Institution Occupational Safety and Health) accredited Gate Safe Aware Training course and only installers who have successfully completed the course are eligible to use the Gate Safe Aware Installer logo. Jacksons Fencing is a Gate Safe Premier Installer. The Door and Hardware Federation Jacksons Fencing is a member of The Door and Hardware Federation, a long-established trade association that helps its members comply with the latest CE marking legislation and health and safety compliance legislation. They work closely with installers of powered gates to raise awareness of the need for an enhanced understanding of automated gate safety. With the ultimate aim of maintaining and raising quality standards throughout the industry, all DHF members must meet Quality Assured standards of competence and customer service. They all operate within a code of conduct governing standards of workmanship, quality, training, safety, business integrity and CE marking compliance. Secured by Design and LPS 1175 Jacksons Fencing is a Secured by Design Licensed Company with products which meet technical standards endorsed by ACPO (Association of Chief Police Officers) CPI (Crime Prevention Initiatives) Ltd. In addition, Jacksons is one of the few manufacturers of security fencing to have products tested and certified by Loss Prevention Certification Board at Security Ratings SR1 to SR5. If you need higher levels of security than in the products shown in this Good Fencing Guide, please talk to our commercial and security fencing sales team. We design and manufacture a comprehensive range of security solutions to meet your specific needs. Our in-house CAD design department gives us the flexibility to respond to all our customers individual requirements, ensuring we provide the very best solution, whether it is in timber or steel. All steel used in our manufactured products is galvanised as standard and offered with optional colour powder coating, carried out in our powder coating plant on site. Our Jakcure treated timber fencing and all our security fencing carries a 25-year Service Life guarantee. Jacksons is not just about fencing and gates, we offer acoustic and pedestrian safety barriers, sports and security enclosures, temporary fencing, parking controls and gate and barrier automation. If you would like a copy of our Commercial brochure please call: or visit jacksons-security.co.uk 7

40 Crafted For Life, Made With Passion. Discover Premium Quality Fencing, Gates and Accessories With a 25 Year Guarantee. Issue 2 - Volume 1 JF/MKT/PG/0718/V1 Jacksons Fencing: Head Office, Stowting Common, Ashford, Kent, TN25 6BN Fax: International: +44 (0) Locations: Ashford, Bath and Chester sales@jacksons-fencing.co.uk Registered Office: Stowting Common, Ashford, Kent, TN25 6BN, United Kingdom. Registered in England No