AMS POWER DRILLS. Drill Adapters. AMS Cross Handles & Extensions. AMS Augers for 2" Bait Stations. AMS Augers for 3" Bait Stations

Size: px
Start display at page:

Download "AMS POWER DRILLS. Drill Adapters. AMS Cross Handles & Extensions. AMS Augers for 2" Bait Stations. AMS Augers for 3" Bait Stations"

Transcription

1 PHONE: ONLINE:

2 AMS POWER DRILLS AMS Augers AMS Augers are used to dig holes that fit popular termite bait stations. Their bits and cutting heads help pull the auger into the ground with each twist of their handle. Regular Augers are used in most soil conditions, Mud Augers are designed for moist and sticky soils, Dutch Augers will help you get through heavily rooted areas, and Open-Faced Augers feature an aggressive cutting head that is great for muds, clays, and hard soils. The One-Piece Open-Faced Auger has a total length of 52 inches. The Idaho Spoon is used to clear soil from Open-Faced Auger # # # # AMS Echo Gas Drills These lightweight, 2-cycle gas-powered drills make digging holes a cinch. 210 and 260 models have a 1/2" chuck. 410 models use an EA-410 adapter. # # # AMS Cross Handles & Extensions " Rubber-Coated Handle $ " Ratcheting Handle $ ' Extension $ ' Extension $ ' Extension $63.50 Echo Gas Drill Accessories The gas drill support bracket and side handle replacement are used with the Echo EDR-210 and the EDR-260 gas drills. # AMS Augers for 2" Bait Stations /4" Regular Auger $ /4 Mud Auger $ " Dutch Auger $ AMS Augers for 3" Bait Stations /4" Regular Auger $ /4" Mud Auger $ /2" Open-Faced Auger $ One-Piece 2 1/2" Open Faced Auger $ Idaho Spoon cleanout tool $ EDR-210 (rev.) Echo Gas Drill $ EDR-260 (rev.) Echo Gas Drill $ EA-410 Echo Gas Drill $ Echo Gas Drill Side Handle Replacement $22.30 Rotary Hammer Drills These drills offer a lot of power for heavy duty applications! Rotary hammer drills can be used to penetrate asphalt and concrete and offer both rotary and hammering capabilities. #55647 # # DeWALT D25600K $ Bosch $1, Drill Adapters # # # # # # # # # # # The outstanding quality of the AMS one-piece auger makes installation of the Advance bait stations a breeze. Darren Nauert, Termite Doctors Chesterfield, MO Heavy-Duty Splined Adapter (260.40, and only) $ Heavy-Duty SDS-Max Adapter (260.42, and only ) $ /8" NC Male to 1/2" Gas Drill Adapter $ /8" NC Male to SDS-Max Drill Adapter $ /8" NC Male to SDS-Plus Drill Adapter $ /8" NC Male to Splined Drill Adapter $ /8" NC Male to EA-410 Drill Adapter $ /8" NC Male to EA-410 Spring Adapter $ /8" NC Female to 5/8" Male Gas Drill Spring Adapter $ The World s Finest Sampling Equipment

3 AMS POWERED BAIT STATION INSTALLATION EQUIPMENT Tools for Whitmire TM Advance /2 Flighted Auger, Tip and 1/2 Gas Drill Adapter $ /2" Flighted Auger $ Cup Cutter $ /2" Standard Tip $ /8" Hard Surfaced Tip $ /8" Carbide Tip $ /2'' Flighted Auger W/ Carbide Tip $ /2'' Flighted Auger W/ Carbide Tip and Adapter $ Flighted Auger 2-1/2" W/ Tip $ For Hard and Compacted Clay Soil Conditions # Advance by Whitmire Micro-Gen Tools for Ensystex Exterra TM /16 Flighted Auger $ # Cup Cutter (Reverse Threaded) Tools for Dow AgroSciences Sentricon /8 Flighted Auger, Tip and 1/2 Gas Drill Adapter $ /8'' Flighted Auger W/ $ Carbide Tip /8'' Flighted Auger W/ $ Carbide Tip and Adapter /8 Flighted Auger $ STC Cup Cutter $ /8 Standard Tip $ Hard Surfaced Tip $ " Carbide Tip $ Station Flighted Auger $ /8 SNT Flighted Auger $ /8" Flighted Auger W/tip $ For Hard and Compacted Clay Soil Conditions Exterra System by Ensystex # # # # # #21016 #21015 Bait Station Installation Kits for Sentricon Bait Stations Sentricon Auger Kit $ Sentricon Flighted Auger Kit $ Sentricon Deluxe Auger Kit $1, Fits 1/2 Chuck Sentricon System by Dow AgroSciences # Fits 1/2 Chuck # # # # # # Deluxe Auger Kit for Sentricon Stations The kit includes: 1 7/8 Flighted Auger w/tip, and 1/2 Drill Adapter, 1 1/2 Clean Out Auger, 1 3/4 Regular Auger, 1 3/4 Mud Auger, 18 Rubber Coated Cross Handle, 2 Extension, Insertion Tool, Station Puller, Mini Slide Hammer, Poly-Canvas Carrying Case # # #21018 #21017 Order by phone: by fax: web:

4 Flighted Auger Kits for Sentricon and other 2" Bait Stations Bait Station Flighted Auger Kit includes: 1-7/8 Flighted Auger with tip and 1/2 Drill Adapter, 1/2 Clean Out Auger, Insertion Tool, Mini Slide Hammer. It is used with Sentricon, Termitrol, Firstline, and other 2 bait stations systems. Flighted Auger Kits for 2" Bait Stations Flighted Auger Kit for 2" Bait Station $ Auger Kits for Sentricon and other 2" Bait Stations The Bait Station Auger Kit includes: 2 Station Auger, Clean Out Auger, Insertion Tool, and Mini Slide Hammer. It is used with Sentricon, Termitrol, Firstline, and other 2 bait stations systems. Auger Kits for 2" Stations Bait Station Auger Kit $ for the Deluxe Auger Kit for Installing Sentricon and other 2" Termite Bait Stations and much more! Parts may also be purchased individually. Concrete Bits & Rocky Soil Screw Augers Screw augers are used with rotary hammer drills to penetrate hard soils, asphalt and concrete. They have extra large pilot tips, and include a built-in SDS-Max or splined adapter. Concrete bits are made for fast, accurate drilling with a rotary hammer drill. Concrete and wild bore bits are one-piece bits, while concrete core bits include a core body, SDS-Max or splined adapter, and a starter or pilot bit. Cleanout Augers # # # # Two-Piece Tile Probe The two-piece tile probe is used for locating underground obstructions. # Mini Slide Hammer Use the Slide Hammer with the Insertion Tool for shearing roots during inspection or installation of Sentricon bait stations. Cleanout Augers /2 Power Cleanout Auger $ /2 T-Bar Cleanout Auger $ /2 Power Cleanout Auger $ /2 T-Bar Cleanout Auger $13.40 Insertion Tool Use the Insertion Tool with the Slide Hammer to assist in the insertion or cleaning of Sentricon bait stations. # # # # # # Rocky Soil Screw Augers " Carbide Bit Splined $ " Carbide Bit SDS-Max $ Concrete Bits /2" Concrete Bit SDS-Max $ /2" Wild Bore Bit SDS-Max $ Concrete Coring Bits " Concrete Core Bit SDS-Max $ " Concrete Core Bit Splined $ Heavy-Duty Concrete Coring Bits " HD Concrete Core Bit Splined $ " HD Concrete Core Bit SDS-Max $ Concrete Port Covers These 3 port covers are great for covering 2 bait stations without a locking top or soil cover. They are secured by a 2 screw which expands the rubber o-ring that locks in the flushmounted cap and locks out moisture. # # # # Concrete Port Covers Aluminum Port Cover $ Black Port Cover $ Brass Port Cover $ Screw Driver for Port Cover $15.60 Station Puller Use the Station Puller to remove Sentricon bait stations # Accessories # Mini Slide Hammer $ Insertion Tool $ Station Puller $ Two-Piece Tile Probe $46.40 The World s Finest Sampling Equipment 2016 AMS, Inc. All rights reserved.

5 Header Why Choose Bait Stations over Liquid Treatments: Bait stations are safe for children and pets. Bait station chemicals do not contaminate your soil or the water under or around your home. There is no odor. There are no large holes drilled through the walls, floors or foundations of your home. There is no need for digging or trenching. Bait stations are more environmentally responsible. Liquid treatments use gallons of chemical solutions while baits use only a few grams of active ingredient. In many cases the termite colony is completely eliminated. Studies indicate that liquid termiticides do not completely eliminate termite colonies. AMS manufactures installation equipment for the following termite elimination systems: Dow AgroSciences Sentricon Colony Elimination System Whitmire Micro-Gen s Advance Termite Bait System Ensystex s Exterra Termite Interception and Baiting System FMC s FirstLine Termite Defense System Order by phone: by fax: online: 5

Masonry & Specialty Drilling

Masonry & Specialty Drilling www.irwin.com Masonry & Specialty Drilling SDS-Plus SPEEDHAMMER POWER FEATURES Powers Through rebar With 125 years of experience in drill bit manufacturing, product innovation, design, and development,

More information

Masonry & Specialty Drilling

Masonry & Specialty Drilling Masonry & Specialty Drilling www.irwin.com SDS-Plus POWERS THROUGH REBAR With 125 years of experience in drill bit manufacturing, product innovation, design, and development, and a full range of products

More information

Masonry Tools Index. Impact Hammer Drills. Percussion Bits. Spline Bits, Impact Hammer. Percussion Core Drills. Masonry Drill & Sets

Masonry Tools Index. Impact Hammer Drills. Percussion Bits. Spline Bits, Impact Hammer. Percussion Core Drills. Masonry Drill & Sets Index Impact Hammer Drills Type 606 Slot Drive System...... 112 Type 609 Extra Heavy-Duty...... 114 Masonry Drill & Sets Type 214 All-Purpose, HD........ 110 Type 215 Fast Spiral, HD........ 108 Type 216

More information

Melamine Plastic Laminate. Toilet Partition Installation Manual

Melamine Plastic Laminate. Toilet Partition Installation Manual Melamine Plastic Laminate Toilet Partition Installation Manual PHONE: FAX: 1-866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL THE

More information

Holemaking Products & Accessories

Holemaking Products & Accessories Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy

More information

VIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up

VIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will

More information

Wallboard or plastic Pre-drill holes and use hollow wall anchors or toggle bolts to install your shade in wallboard or plastic.

Wallboard or plastic Pre-drill holes and use hollow wall anchors or toggle bolts to install your shade in wallboard or plastic. Woven Wood Shades Installation Instructions Email: customerservice@blindster.com Call us: (888) 256-8672 Mon - Fri 8am - 7pm (CT) Congratulations on purchasing Woven Wood Shades from Blindster. This window

More information

Masonry Drill Bits

Masonry Drill Bits www.irwin.com Masonry Drill Bits Powers Through Rebar With 125 years of experience in drill bit manufacturing, product innovation, design, and development, and a full range of products available, IRWIN

More information

Drill Bits & Hole Saws

Drill Bits & Hole Saws F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill

More information

AUGER TOOLS. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD

AUGER TOOLS. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD AUGER TOOLS MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com AUGER TOOLS TABLE OF CONTENTS AUGER OVERVIEW... 3 HOLLOW STEM AUGERS... 4-12 2 1/4" Hollow Stem Augers...

More information

D25122(K) D25123(K) D25124(K) D25213(K)

D25122(K) D25123(K) D25124(K) D25213(K) D25122(K) D25123(K) D25124(K) D25213(K) English 6 Copyright DEWALT 2 3 1 5 4 9 7 6 11 10 D25213 5 4 3 9 7 6 11 10 1 2 D25123 8 4 A D25122 D25124 3 5 4 6 B1 5 4 7 12 B2 C 10 9 11 D 4 E 3 3 F1 F2 6 8 13

More information

POWER TOOL ACCESSORY GUIDE

POWER TOOL ACCESSORY GUIDE POWER TOOL ACCESSORY GUIDE TABLE OF CONTENTS METAL SAWZALL BLADES 3 WOOD SAWZALL BLADES & HACKZALL BLADES & BLADE KITS 4 SPECIALTY SAWZALL BLADES 5 HOLE SAWS & HOLE SAW KITS 6 SPECIALTY HOLE SAWS 7 THIN

More information

chisels & breakers HAMMER chisels & breaker steels SDS PLUS hammer chisels SDS MAX hammer chisels pneumatic breaker steels electric breaker steels

chisels & breakers HAMMER chisels & breaker steels SDS PLUS hammer chisels SDS MAX hammer chisels pneumatic breaker steels electric breaker steels 107 chisels & breakers HAMMER chisels & breaker steels SDS PLUS haer chisels SDS MAX haer chisels pneumatic breaker steels electric breaker steels MASONRY AND CONCRETE SDS plus chisels 108 MORTAR RAKING

More information

HAMMER chisels & breaker steels

HAMMER chisels & breaker steels 83 HAMMER chisels & breaker steels HAMMER chisels & breaker steels SDS PLUS haer chisels SDS MAX haer chisels pneumatic breaker steels electric breaker steels SDS plus chisels 84 MORTAR RAKING DP-SDS-MRC

More information

Hardwood Installation Products. Catalog No. 4

Hardwood Installation Products. Catalog No. 4 Hardwood Installation Products Catalog No. 4 Table of Contents Pages 1 2-4 5 6 7 8 9 Product Categories Moisture Meter & Self Leveling Concrete Restoration & Blades Abrasives Fastening Cutters & Accessories

More information

MAKO EC EXTENDED CABINET

MAKO EC EXTENDED CABINET MAKO EC EXTENDED CABINET INSTALLATION GUIDE VERSION 2.0 TDN 0702-00033 03/0 CORPORATE HEADQUARTERS: RMA (RETURN MATERIAL AUTHORIZATION) RETURN ADDRESS: 522 E. Railroad Street 2405 B Street Long Beach,

More information

MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox

MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox INSTALLATION INSTRUCTIONS MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox The MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit provides a sturdy support for LCD displays

More information

Complete line of Holemaking Products and Accessories

Complete line of Holemaking Products and Accessories Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related

More information

Holemaking Products & Accessories

Holemaking Products & Accessories Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get

More information

HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand

HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand Ex GST Inc GST $4,350.00 $3,990.00 $4,785.00 $4,389.00 Special

More information

ANCHORS SLEEVE ANCHORS BOLT DIAMETER

ANCHORS SLEEVE ANCHORS BOLT DIAMETER SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal

More information

Universal rotary hammer drill, 4 kg, SDS-plus. CHE 4-32 SDS-plus

Universal rotary hammer drill, 4 kg, SDS-plus. CHE 4-32 SDS-plus Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Universal rotary hammer drill, 4 kg, SDS-plus CHE 4-32 SDS-plus Order number 428.337 Universal rotary hammer drill, 4 kg, SDS-plus + 900

More information

HORIZONTAL BORING GRUNDOMAT PNEUMATIC PIERCING TOOL DO IT RIGHT THE FIRST TIME

HORIZONTAL BORING GRUNDOMAT PNEUMATIC PIERCING TOOL DO IT RIGHT THE FIRST TIME GRUNDOMAT PNEUMATIC PIERCING TOOL HORIZONTAL BORING DO IT RIGHT THE FIRST TIME Superior accuracy puts the Grundomat piercing tool in a class by itself. The Grundomat performs accurate horizontal bores

More information

HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column

HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table

More information

Stainless Steel 95C34 Series

Stainless Steel 95C34 Series Stainless Steel 95C34 Series Toilet Partition Installation Manual PHONE: FAX: 866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL

More information

HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column

HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table

More information

IMPORTANT: Read all sections before you start

IMPORTANT: Read all sections before you start 1 IMPORTANT: Read all sections before you start For the most up to date information please visit our website @ www.newtechwood.com Prior to installing the railing, please consult local zoning laws in regards

More information

INSTALLATION INSTRUCTIONS PRAVOL DURA-SHIELD COMPOSITE DECK RAILINGS

INSTALLATION INSTRUCTIONS PRAVOL DURA-SHIELD COMPOSITE DECK RAILINGS INSTALLATION INSTRUCTIONS PRAVOL DURA-SHIELD COMPOSITE DECK RAILINGS Important: Read all sections before you start Prior to installing railing, please consult local zoning laws in regards to load requirements

More information

MAKO TM CASH DISPENSER

MAKO TM CASH DISPENSER MAKO TM CASH DISPENSER PEDESTAL INSTALLATION GUIDE VERSION 2.0 TDN 0702-000 2/99 CORPORATE HEADQUARTERS: RMA (RETURN MATERIAL AUTHORIZATION) RETURN ADDRESS: 522 E. Railroad Street 2405 B Street Long Beach,

More information

ASPEN STYLE. ORNAMENTAL GATE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. EGBR5842-N2P

ASPEN STYLE. ORNAMENTAL GATE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. EGBR5842-N2P 1 ASPEN STYLE ORNAMENTAL GATE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. EGBR5842-N2P INSTALLATION VIDEO AVAILABLE AT: video01.xcelfence.com Item Description Gate installation and assembly

More information

16 Piece Twister Drilling Set.

16 Piece Twister Drilling Set. 16 Piece Twister Drilling Set. TECHNICAL REFERENCE GUIDE Drill. With Impact. Not all ¼ shank accessories can withstand the higher torque produced by an impact driver. Our 16 Piece Twister Drilling Set

More information

INSTALLATION INSTRUCTIONS John Deere 600C Corn Head Auger Trough Liner

INSTALLATION INSTRUCTIONS John Deere 600C Corn Head Auger Trough Liner www.polyskid.com P.O. Drawer 349, Monticello, GA 31064 Phone: 800.542.7659 Fax: 706.468.2881 e-mail: polytech@polyskid.com INSTALLATION INSTRUCTIONS John Deere 600C Corn Head Auger Trough Liner IT IS VERY

More information

TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE

TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE 1021 NO ITEM # DESCRIPTION QTY Item No: 199512 Hottest package deal from Toolway 1 199512 200 PC Picture Hanging Set 12 2 199512 2 PC

More information

PRIVACY INSTALLATION FOR: Standard 6 H x 8 W Privacy Fence 4 x 4 Post Sleeve & Brackets Dog Ear or Straight-Edge Pickets 1.75 x 3.

PRIVACY INSTALLATION FOR: Standard 6 H x 8 W Privacy Fence 4 x 4 Post Sleeve & Brackets Dog Ear or Straight-Edge Pickets 1.75 x 3. PRIVACY INSTALLATION FOR: Standard 6 H x 8 W Privacy Fence 4 x 4 Post Sleeve & Brackets Dog Ear or Straight-Edge Pickets 1.75 x 3.5 Rail Storage and Handling Fence Preparation and Layout Locate and Set

More information

POWER TOOL ACCESSORIES PROMOTION

POWER TOOL ACCESSORIES PROMOTION POWER TOOL ACCESSORIES PROMOTION BUY $100 in Accessories Any Mix & GET a $2 DRIVEKORE Gift Card GET a $2 DRIVEKORE Gift Card Offer available on all in stock accessories and any special order accessories.

More information

Overview. Linear Motion and Assembly Technologies /11 Aluminum Framing. Bosch Rexroth Corp. Section 15: Tools

Overview. Linear Motion and Assembly Technologies /11 Aluminum Framing. Bosch Rexroth Corp. Section 15: Tools 8981 500 201 08/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Section : Tools Overview With Bosch Rexroth aluminum structural framing, you can either specify profiles square cut to length,

More information

Qwik-Fence Installation Instructions

Qwik-Fence Installation Instructions Qwik-Fence Installation Instructions 1 Tools Required The following installation instructions should be used as a guide for installing Folding Guard Qwik-Fence Partitions. Good common sense and appropriate

More information

HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm

HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm On Sale Ex GST Inc GST $1,850.00 $1,690.00 $2,035.00 $1,859.00 ORDER CODE: M121 MODEL: Digital Readout: HM-32 Optional Type: Vertical Table

More information

Transform Cable Rail MUST be installed on 4" x 4" wooden posts sleeved with Transform post sleeves to support cable tension!

Transform Cable Rail MUST be installed on 4 x 4 wooden posts sleeved with Transform post sleeves to support cable tension! CABLE RAIL INSTALLATION INSTRUCTIONS OVERVIEW...2 LEVEL...3 STAIR...13 Transform Cable Rail MUST be installed on 4" x 4" wooden posts sleeved with Transform post sleeves to support cable tension! 1 Need

More information

SHELTON THERMOSTATIC SHOWER PANEL

SHELTON THERMOSTATIC SHOWER PANEL SKU(s): 413241 BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the plumbing, floor,

More information

Rear Katerack Installation Instructions

Rear Katerack Installation Instructions Rear Katerack Installation Instructions Ram Promaster City 2015+ Frame Kit Part #: CRC 26-1000-001 V1.0.12.04.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED

More information

INSTALLATION INSTRUCTIONS for EVERROCK SKIRTING

INSTALLATION INSTRUCTIONS for EVERROCK SKIRTING INSTALLATION INSTRUCTIONS for EVERROCK SKIRTING EVERLOCK SYSTEMS, INC. (ESI) has provided these suggested instructions as installation guidelines. ESI; however, neither installs the panels nor has any

More information

Pergola Installation Instructions

Pergola Installation Instructions Pergola Installation Instructions TOOLS REQUIRED HAMMER DRILL 1/2 MASONRY BIT PENCIL DRILL 3/16 DRILL BIT LEVEL SQUARE LADDER WRATCHET & SOCKETS RUBBER MALLET 2 TAPE MEASURE Column/Post Placement Table

More information

NEED HDD TOOLS, PARTS & ACCESSORIES?

NEED HDD TOOLS, PARTS & ACCESSORIES? NEED HDD TOOLS, PARTS & ACCESSORIES? Visit us on-line at straightlinehdd.com STRAIGHTLINE Produce Profitable Solutions In All Ground Conditions. THE RIGHT REAMER AVAILABLE FOR EVERY DRILL. StraightLine

More information

DELUXE HIGH SECURITY SET LKM116 INSTRUCTIONS

DELUXE HIGH SECURITY SET LKM116 INSTRUCTIONS DELUXE HIGH SECURITY SET LKM116 INSTRUCTIONS S&G 8400/8500 DRILL GUIDE LKM115 INSTRUCTIONS X-O7 Dial Puller & Drill Guide Components X-O7 DIAL SPACER RING Puller cup cup handle Spindle bolt Puller bolt

More information

ITB-48 - Industrial Tool Box (48") 2 x Gas Struts

ITB-48 - Industrial Tool Box (48) 2 x Gas Struts ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett

More information

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES PRICE HEAVY-DUTY BLADES PER PER E-BLADES NUMBER Great Low Prices E-100 10 22025 $14.65 Heavy Duty HSS for steel and aluminum.

More information

Grain Tank Cross Auger Trough Liner for John Deere 9400 / 9500 Combine

Grain Tank Cross Auger Trough Liner for John Deere 9400 / 9500 Combine www.polyskid.com P. O. Drawer 349, Monticello, GA. 31064 Phone: 800-542-7659, Fax: 706-468-2881 E-Mail: polytech@polyskid.com Grain Tank Cross Auger Trough Liner for John Deere 9400 / 9500 Combine FOR

More information

Zippity. Zippity Pet or Garden Enclosure Kit (8 x 8 x 30 H) ASSEMBLY INSTRUCTIONS. Ver 1.1/070116

Zippity. Zippity Pet or Garden Enclosure Kit (8 x 8 x 30 H) ASSEMBLY INSTRUCTIONS.   Ver 1.1/070116 ASSEMBLY INSTRUCTIONS Pet or Garden Enclosure Kit (8 x 8 x 0 H) Assembly Time... to Hours Installation Time... to Hours 9 /8 in 9 /8 in / in 0 in / in in 6 7/8 in Gate Opening in Ground 0 in Top View www.zippity-outdoor.com

More information

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES Great Low Prices HEAVY-DUTY E-BLADES BLADES PER NUMBER E-0 22025 PRICE PER $14.20 Heavy Duty HSS for steel and aluminum.

More information

Installation Guide. Capped Cellular PVC Fencing. Table of Contents. Storage and Handling Tools Needed Fence Layout and Locating Posts

Installation Guide. Capped Cellular PVC Fencing. Table of Contents. Storage and Handling Tools Needed Fence Layout and Locating Posts Capped Cellular PVC Fencing Installation Guide Table of Contents Storage and Handling Tools Needed Fence Layout and Locating Posts Installation instructions 4 x 4 Over Sleeve Post - 3.5 Rail Privacy Shadowbox

More information

Dublin Stalls Installation Instructions

Dublin Stalls Installation Instructions Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round

More information

CMA-455 Suspended Ceiling-Tile Reinforcing Kit

CMA-455 Suspended Ceiling-Tile Reinforcing Kit INSTALLATION INSTRUCTIONS CMA-455 Suspended Ceiling-Tile Reinforcing Kit The provides a sturdy support for LCD/DLP hanging brackets (and certain other products) when installing these products in a suspended

More information

SAMSON. Industrial. Quality Products...Excellent Service

SAMSON. Industrial. Quality Products...Excellent Service Quality Products...Excellent Service WET DIAMOND Premium Black Our Premium Black bit is the industry standard. Its very high diamond concentration gives maximum footage and drilling speed. Designed for

More information

STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal

STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity

More information

Fast and flexible use Powerful results

Fast and flexible use Powerful results Fast and flexible use Powerful results CORDLESS DRILLS AND BITS DRILL BIT GUIDE Turbo Stone Brad Point Bit Flat Wood Bit Lewis Auger Bit HSS-G Super-Pro Twist Drill Multimat Allmat Ceramic Master Concrete

More information

SHADOWBOX INSTALLATION FOR: Standard 6 H x 8 W Shadowbox Fence 5 x 5 Routed Posts Dog Ear or Straight-Edge Pickets 1.75 x 3.5 Rail

SHADOWBOX INSTALLATION FOR: Standard 6 H x 8 W Shadowbox Fence 5 x 5 Routed Posts Dog Ear or Straight-Edge Pickets 1.75 x 3.5 Rail SHADOWBOX INSTALLATION FOR: Standard 6 H x 8 W Shadowbox Fence 5 x 5 Routed Posts Dog Ear or Straight-Edge Pickets 1.75 x 3.5 Rail Storage and Handling Fence Preparation and Layout Locate and Set Posts

More information

Protective titanium nitrite coating. Double-fluted design. No. of Hole Sizes 1/8 to 1/2 13. Drill Diameter Sizes (In.) 1/4 to 7/8 11 1/16

Protective titanium nitrite coating. Double-fluted design. No. of Hole Sizes 1/8 to 1/2 13. Drill Diameter Sizes (In.) 1/4 to 7/8 11 1/16 Step Drill Bits 35-511 35-512 35-513 35-514 Trust IDEAL step drill bits for precise, repetitive drilling through the toughest materials including brass, carbon steel, cast iron, stainless steel, and more.

More information

KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Descriptions Description STEP DRILL BIT #14 DOUBLE-FLUTED, 3/16 TO 7/8"

KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8 Descriptions Description STEP DRILL BIT #14 DOUBLE-FLUTED, 3/16 TO 7/8 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Klein Tools Catalog Number Manufacturer Weight per unit Product

More information

(Watertown, SD)

(Watertown, SD) A Notes updated and cosmetic changes REV ph: 1.800.447.2781 DESC / PAGE NUMBERS AFFECTED fax: 903.957.0015 (Sherman, TX) 101911 DATE email: augertools@terex.com Rev 09/13/11 Spin-Bottom, Drill Bucket 3/4

More information

Anchor Kit Installation Guide

Anchor Kit Installation Guide Anchor Kit 105587 Installation Guide Use the following photos as guides to identify the rafter leg pipe diameter of your ClearSpan shelter. Install the anchor kit brackets as shown in the photos below.

More information

CAELI THERMOSTATIC SHOWER PANEL

CAELI THERMOSTATIC SHOWER PANEL SKU(s): 300280 CAELI THERMOSTATIC SHOWER PANEL BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for

More information

MILWAUKEE TOOLS

MILWAUKEE TOOLS INDEX ACCESSORIES BATTERY PACKS/CHARGER... 14-7 BIT EXTENSION... 14-9 BLADES BAND SAW... 14-7 CIRCULAR SAW... 14-10 SHEAR FOR MODEL 6850... 14-7 HOLE SAW KITS... 14-8 HOLE SAWS 4/6 BI-METAL... 14-8 ARBORS...

More information

56-6XX CLEAR-Pb Mobile Barriers

56-6XX CLEAR-Pb Mobile Barriers 56-6XX CLEAR-Pb Mobile Barriers User Manual January 2008 Manual No. 56-6XX-1 Rev. 2 2004, 2005, 2008 Fluke Corporation, All rights reserved. All product names are trademarks of their respective companies

More information

Introducing the next generation of E-Z Bore Machines

Introducing the next generation of E-Z Bore Machines Introducing the next generation of E-Z Bore Machines The rise in popularity of OHV motors leaves some flathead E-Z Bore owners thinking their equipment is obsolete. Don't dispose of your old E-Z Bore!

More information

118 Chiseling Overview Bosch Accessories 11/ % Bosch: the new flat chisel SDS-max RTec Sharp and the new pointed chisel SDS-max RTec Speed

118 Chiseling Overview Bosch Accessories 11/ % Bosch: the new flat chisel SDS-max RTec Sharp and the new pointed chisel SDS-max RTec Speed Chiseling 118 Chiseling Overview Bosch Accessories 11/12 100% Bosch: the new flat chisel SDS-max RTec Sharp and the new pointed chisel SDS-max RTec Speed Bosch Accessories 11/12 Chiseling Overview 119

More information

ASPEN STYLE. ORNAMENTAL FENCE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. NBR7958-NPF

ASPEN STYLE. ORNAMENTAL FENCE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. NBR7958-NPF 1 ASPEN STYLE ORNAMENTAL FENCE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. NBR7958-NPF INSTALLATION VIDEO AVAILABLE AT: video01.xcelfence.com Item Description Fence installation and assembly

More information

Titan Series Awning Assembly and Installation Instructions

Titan Series Awning Assembly and Installation Instructions Titan Series Awning Assembly and Installation Instructions Be sure to use safety glasses when assembling and installing the awning. Some metal parts may have sharp edges. Use work gloves to handle them.

More information

HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand

HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018

More information

Bulkhead Model Number and

Bulkhead Model Number and Bulkhead Model Number 96141-3-01 and 96142-3-01 Installing your ProMaster bulkhead is very clear cut following these instructions. Before cutting or drilling in the floor, verify the location of you gas

More information

Legacy DaVinci Pen Kit

Legacy DaVinci Pen Kit Description: The DaVinci model is a single tube pen kit that uses a 3/8 tube and is a great starter kit for those new to pen turning. They are look similar to our Viceroy kit with a more intricate design.

More information

Salter Industries Spiral Stair

Salter Industries Spiral Stair Salter Industries Spiral Stair The Leader in Spiral Staircases Continuous Sleeve Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4",

More information

CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW

CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:

More information

YUKON PATIO COVER INSTALLATION INSTRUCTIONS

YUKON PATIO COVER INSTALLATION INSTRUCTIONS YUKON PATIO COVER INSTALLATION INSTRUCTIONS Before You Begin: Consult your local building department for any required permits You may be required to obtain a building permit for this structure. Contact

More information

MAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION

MAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION ORNAMENTAL GATE HARDWARE JUST ASK FOR THE MAXIMA TRADITIONAL QUICK & EASY TO INSTALL Patent No. 4,871,203 No. 4,690,440 j j j j j PRE-ASSEMBLED You do not have to put it together EASIEST INSTALLATION Two

More information

Mounting Accessories. Installation Guide. VIVOTEK SD83XXE Speed Dome

Mounting Accessories. Installation Guide. VIVOTEK SD83XXE Speed Dome VIVOTEK SD83XXE Speed Dome Mounting Accessories AM-116/117 Pendant Pipe AM-118 Pendant Head AM-221 Gooseneck AM-231 Parapet Mount AM-519 Pendant Adaptor Installation Guide Corresponding part numbers: AM-116:

More information

Power Tool Accessories

Power Tool Accessories Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with

More information

Premium Power Tool Accessories Proudly Made in the USA

Premium Power Tool Accessories Proudly Made in the USA Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a

More information

Joe Jeter Sales Brunner & Lay Catalog 7850 Carr St, Dallas, TX fax

Joe Jeter Sales Brunner & Lay Catalog 7850 Carr St, Dallas, TX fax Joe Jeter Sales Joe Jeter Sales Brunner & Lay Catalog 7850 Carr St, Dallas, TX 75227-4019 214-388-4707 fax local 214-388-6707 800-455-3837 www.joejetersales.com The products featured in this catalog represent

More information

MODEL T27451/T " & 20" SPIRAL CUTTERHEAD INSTRUCTIONS

MODEL T27451/T  & 20 SPIRAL CUTTERHEAD INSTRUCTIONS MODEL T27451/T27452 15" & 20" SPIRAL CUTTERHEAD INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com The T27451 15" & T27452 20" indexable

More information

Reed pipe tools and vises

Reed pipe tools and vises Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such

More information

WTC Industrial Mobile Tooling Cabinet Workstation

WTC Industrial Mobile Tooling Cabinet Workstation WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load

More information

Step by Step Installation Instructions. Poly Shutters. Customer Service or visit us online at smithandnoble.com

Step by Step Installation Instructions. Poly Shutters. Customer Service or visit us online at smithandnoble.com Step by Step Installation Instructions Poly Shutters Customer Service 800.248.8888 or visit us online at smithandnoble.com THANK YOU for purchasing from smith+noble. Your new window treatments have been

More information

WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES

WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With

More information

Peco Fasteners 3/8 Internal Plug Drop In 50 Per Jar 3/8-16 SMART DROP IN ANCHOR ZINC

Peco Fasteners 3/8 Internal Plug Drop In 50 Per Jar 3/8-16 SMART DROP IN ANCHOR ZINC 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category 6337J 3/8-6 Smart Drop In Zinc Peco Fasteners,

More information

TAPPING CHUCKS & COLLETS

TAPPING CHUCKS & COLLETS TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression

More information

TCW Industrial Tooling Cabinet

TCW Industrial Tooling Cabinet TCW-1200 - Industrial Tooling Cabinet 881 x 653 x 1200mm 100kg per Drawer Ex GST Inc GST $1,070.00 $1,230.50 ORDER CODE: MODEL: T772 TCW-1200 Number of Drawers (No.): 7 Drawer Load Capacity (kg): 100 Maximum

More information

FOUNDATION AUGERS. FOR USE ON THE FOLLOWING CARRIES Foundation Drill Rigs

FOUNDATION AUGERS. FOR USE ON THE FOLLOWING CARRIES Foundation Drill Rigs FOR USE ON THE FOLLOWING CARRIES Foundation Drill Rigs PENGO AUGER SOIL CHART Pengo has developed the chart below to help you decide which auger will be best suited for your project. The above triangles

More information

MODEL NO (S ) POST HOLE DIGGER OWNER S MANUAL

MODEL NO (S ) POST HOLE DIGGER OWNER S MANUAL MODEL NO. 2100220 (S24045500) POST HOLE DIGGER OWNER S MANUAL ASSEMBLY & OPERATING INSTRUCTIONS THIS SAFETY ALERT SYMBOL IDENTIFIES IMPORTANT SAFETY MESSAGES IN THIS MANUAL. FAILURE TO FOLLOW THIS IMPORTANT

More information

Snappy. Make it. No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!

Snappy. Make it. No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly! Proudly Made in the USA ADAPTS ALL 1/4 HEX POWER BIT TOOLS TO YOUR POWER DRILL No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!

More information

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000 STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal

More information

Aluminum. Fence Systems

Aluminum. Fence Systems Aluminum M Fence Systems Lifetime Warranty Aluminum Fence Systems Gates & Hardware The Morgan Series Aluminum Fence System is manufactured of the highest quality aluminum and all parts of the system are

More information

INSTALLATION INSTRUCTIONS K9-C20-32 & K9-C CHEVROLET 4 DOOR TAHOE, GMC YUKON, SUBURBAN and YULON XL

INSTALLATION INSTRUCTIONS K9-C20-32 & K9-C CHEVROLET 4 DOOR TAHOE, GMC YUKON, SUBURBAN and YULON XL INSTALLATION INSTRUCTIONS K9-C20-32 & K9-C21-32 2007-2014 CHEVROLET 4 DOOR TAHOE, GMC YUKON, SUBURBAN and YULON XL TOOLS REQUIRED: Power drill Drill bit set Standard & metric socket sets Phillips screwdriver

More information

Congratulations! Your dog is going to love you!

Congratulations! Your dog is going to love you! DIY INSTRUCTIONS Congratulations! Your dog is going to love you! Thank you for ordering your non-electric dog fence kit from Pet Playgrounds. In less than a day you will have your very own personal dog

More information

INFUSIONS and METALWORKS Wings Accent and Acoustical Clouds

INFUSIONS and METALWORKS Wings Accent and Acoustical Clouds INFUSIONS and METALWORKS Wings Accent and Acoustical Clouds Assembly and Installation Instructions 1. GENERAL 1.1 Product Description Wings is a decorative ceiling element consisting of a 10 foot long

More information

53932 Wood Boring Bit, 78" Features. Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories.

53932 Wood Boring Bit, 78 Features. Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories. 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 53932 Wood Boring Bit, 78" Klein Tools Catalog Number 53932 Manufacturer Klein Tools Weight per unit 0.3500 (lbs/each)

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Furniture Solutions: 68 Shipstation with Storage Shelf Model Numbers: PB001 (D9001, D9010N, D9021, D9030, D9032/D9033, D9098, RC4054) Introduction This document provides the Pitney

More information

Get a $25 DriveKore Gift Card with Your Purchase!

Get a $25 DriveKore Gift Card with Your Purchase! Drill Bit Promo Get a $25 DriveKore Gift Card with Your Purchase! DRILL BIT PROMOTION BUY $100 in DRILL BITS & GET a $25 DriveKore Gift Card Offer valid on all stocked drill bits & sets: Offer valid through

More information

CBT LW BATCHING SYSTEM 25, 50, 100 & 200 INSTALLATION GUIDE

CBT LW BATCHING SYSTEM 25, 50, 100 & 200 INSTALLATION GUIDE CBT LW BATCHING SYSTEM 25, 50, 100 & 200 INSTALLATION GUIDE PICTOGRAMS Each Signifier displayed here is specific to this User Manual. Menu Previous Advance Note Tip Example Inspection Bowl & Frame Weigh

More information

Horizontal Directional Drilling (HDD)

Horizontal Directional Drilling (HDD) Horizontal Directional Drilling (HDD) Horizontal Directional Drilling (HDD) continues to be the most popular method of installing electrical cable, fiber optics, utility conduits and irrigation lines in

More information