Adams rite. Electric Strikes for exit device, deadlatch or lockset

Transcription

1 7400 & 74 SERIES GRADE 1 ULTRALINE electric strikes Adams rite Electric Strikes for exit device, deadlatch or lockset A What is Preload? Pressure is exerted on a door and transferred to the electric strike keeper. This pressure prevents the strike from releasing because of the pressure binds the latch to the keeper. Even small amounts preload can cause the electric strike to malfunction or be disabled. Preload Causes Stack pressure caused by heating and air conditioning, misaligned strike and locksets, or warped or damaged metal and wood doors. These preloads can under some conditions leave a door unlocked making building assets vulnerable. Solution The Ultraline strikes are fully adjustable for door & frame related conditioning which allows for the correct functioning of the strike under preload conditions. Using jaw inserts of various sizes, the UltraLine 7400 Series electric strikes are adjustable to compensate for door and frame related preload and security problems. 74R1 74R2 Single solenoid operates on 12, 16 or 24 volt AC/DC power Over 2000 lbs of holding force Open electrically with 30 lbs of preload Compact size: 1-1/16 overall depth Field selectable - fail secure or fail safe Retrofits previous Adams Rite 7800, 7500, 7100 & 7000 series, 74R1 & 74R2 replace old 71R1 & 71R2 series Exceeds Grade 1 standards Adjustable jaw Low current draw UL listed burglary resistance R1 130: for rim exit device 3/4 pullman rim For aluminum, wood, hollow metal jambs & rim exit device 74R2 130: for rim exit device 1/2 narrow rim Aluminum frame Mfg # Faceplate EZ # 74R /4 x 9 x 11/16 Deep R /8 x 9 x 1/2 Deep Current Draw in Amps Volts AC DC * * 16VDC Requires VA VDC adapter available by special order. 7400: For deadlatch or lockset For aluminum jambs or stiles 7410: For deadlatch or lockset For aluminum, hollow metal & wood jambs and doors 7440: For deadlatch or lockset For hollow metal & wood jambs and doors Mfg # Faceplate Corners Latch EZ # /4 x 4-7/8 Flat Radius 1/2 To 5/ /16 x 7-15/16" Flat Radius 1/2 To 5/ /4 x 4-7/8 Flat Square 1/2 To 5/

2 Adams rite Electric strikes & accessories 7100 SERIES GRADE 1 Electric STRIKES Case: 1 x 3-3/8 x 1-5/8, except 7170: 1-7/8 deep Fail safe/fail secure: Field convertible from one mode to the other AC Intermittent solenoid cannot be operated continuously Only DC strikes can be operated continuously Strike opening: Accepts latch of Adams Rite 4500 & 4900 series and cylindrical latches UL listed for burglary resistance A 7100/ Mfg # Voltage EZ # 1/2 to 5/8 latch, 4-7/8 x 1-1/4 flat faceplate with radius corners For Aluminum frame VAC VDC Continuously VAC/12VDC /2 to 5/8 latch, 4-7/8 x 1-1/4 radius faceplate with radius corners For Aluminum, pair of doors VDC Continuously VAC/12VDC /2 to 5/8 latch, 7-15/16 x 1-7/16 flat faceplate with radius corners For Aluminum, hollow metal & wood frames VAC VDC Continuously VAC/12VDC /2 to 5/8 latch, 6-7/8 x 1-1/4 flat faceplate with radius corners For aluminum & MS Cutout frames VDC Continuously VAC/12VDC F1/2 to 5/8 latch, 4-7/8 x 1-1/4 flat faceplate with square corners For hollow metal & wood frames VAC VDC Continuously VAC/12VDC /2 to 5/8 latch, 4-7/8 x 1-1/4 flat faceplate with square corners VAC/12VDC Electric strike accessories Converts low voltage AC current to DC of same voltage Installs in low voltage line between transformer and strike Full wave bridge type Rated 2 amps 4605 Converts 120VAC to 12 or 24VAC Rated 40 volt-amp for plenty of power Mfg # Description EZ # 4603 Rectifier or 24VAC Transformer

3 standalone biometric Fingerprint Cylindrical Lock CANSEC Biometric Cylindrical Lock, Electric Strike & Door Contact C Fake fingerprint/live finger detection Distinguishes between live and fake fingerprint by using electrostatic capacity technology Optical characteristics - analyses the image data achieved from certain angle lighting to the fingerprint using infrared Algorithm - detecting position differences between live and fake fingerprints using algorithmic analysis Fingerprint or prox bypass Enrolment/management via keypad Fingerprint user capacity of 100 Bypass proximity capacity of 50 cards Verification time (1:1) < 1 sec Identification (1:N) time (100 templates) < 2 sec Low battery audible warning Requires 4 x 1.5 V AA Alkaline batteries, 6 V (not included) Battery life: approx 1 year/7,200 cycles Operating temperature: -20 C to +50 C Humidity: < 90% RH, non-condensing 161 standard door prep Latch: 2-3/4 backset, 1/2 throw Door thickness: 1-3/8 and 1-3/4 MFG # Description EZ # UC DL473FR Biometric Cylindrical Lock Series Electric Strike Intended for use with Adams Rite style deadlatches or cylindrical latches For use on hollow metal or aluminum jambs Designed for use with access control systems for electronically locking and unlocking Faceplate: standard 4-7/8 x 1-11/16 x 1-5/8 clear aluminum - comes with 2; 1 square & 1 radius corner Current draw: 12V, 24V Voltage: 12VDC and 24VAC Fail safe or fail secure - field reversible MFG # Description EZ # CA TA DC Electric Strike door contact Recessed 3/4 door contact UL listed contact designed to provide a clean and easy installation for standard openings Provides a wide 1-1/4 opening gap Max. carry current: 1.0 amp Max. switching current: 0.3 amp Operating temperature range: 0 C to +49 C MFG # Description EZ # CA CONTACTCL Contact

4 EC141 Strikes for Aluminum Doors & Centerline locksets EFF EFF Electric strikes Designed for medium-duty applications Expanded latch cavity also accommodates centerline mortise and cylindrical locksets with a 5/8 to 3/4 throw (3/4 requires 1/8 door gap) For metal, wood or aluminum jambs Strike depth 1-1/2 Fail secure only Plug-in pigtail connectors included Static strength: 1,000lbs BHMA Grade 2 UL 1034 burglary resistant Faceplate not included Mfg # Description EZ # EC141 12A/D630 12VAC or 12VDC, Continuous Duty EC141 24A/D630 24VAC or 24VDC, Continuous Duty EC171 Strikes for Aluminum Doors & Centerline locksets E Designed with a 1/8 horizontal adjustable keeper to simplify the installation process Expanded latch cavity accommodates centerline mortise and cylindrical locksets with a 1/2 to 5/8 throw (5/8 requires 1/8 door gap) in metal, wood, aluminum or wood jambs Adjustable keeper Strike depth 1-1/2 Fail secure only Plug-in pigtail connectors included Static strength: 1,000 lbs BHMA Grade 3 UL 1034 burglary resistant Faceplate not included Mfg # Description EZ # EC171 12D630 12VDC, Conitunous Duty EC171 24D630 24VDC, Continuous Duty

5 310-2 & Electric strikes Folger Adam Grade 1 electric strikes Industrial grade electric strikes for use with cylindrical locks, mortise locks and mortise exit devices Horizontally adjustable keeper to allow for door and frame misalignment Tamper resistant, heavy-duty construction of entirely stainless steel for strength and corrosion resistance Static strength 1,500 lbs, reversible Plug-in connector Current Draw:.51 12VDC,.25 24VDC continuous duty Note: These products will require relocation of the centre line when used with mortise locks For a 1/2 or 5/8 throw latchbolt (without deadbolt) on single and pairs of doors. 1/2 keeper standard For a lockset with both a 3/4 throw latchbolt and a 1 throw deadbolt Deadbolt must be retracted manually Position of block within cavity is adjustable to properly locate auxiliary latchbolt for deadlocking purposes 1 keeper standard Mfg # Voltage Function EZ # D630 24VDC Fail Secure D630 24VDC Fail Secure Replacement solenoid Mfg # Voltage EZ # VDC 12VDC VDC 24VDC rim electric strike F Industrial grade electric strikes for use with rim exit devices For up to 3/4 pullman style latchbolts on single doors. 3/4 keeper depth Integrated shim for quick customization of faceplate thickness (3/4 to 1/2 ) Tamper resistant, heavy-duty construction construction of entirely of stainless steel for strength and corrosion resistance Static strength 1,500 lbs Integrated ramps to better accommodate deadlatches Set screws for horizontal lockdown In-frame horizontal adjustability Wider faceplate (1-3/4 ) for greater versatility Size: 9 x 1-3/4, reversible Fail secure (standard) Plug-in connector Current draw:.25 24VDC continuous duty Mfg # EZ # D

6 HES 1006 Series Electric Strikes & Optional faceplates 1006 Grade 1 electric StrikeS with K Option The strongest and most versatile electric strike that meets or exceeds every standard developed for electric strikes With 27 faceplate options, the 1006 can accommodate virtually every type of lockset on the market Fail secure Field selectable dual voltage 12VDC or 24VDC continuous duty».45» 12VDC continuous duty».25» 24VDC continuous duty Accommodates up to 1 deadbolt For steel, aluminum & wood frames Stainless steel construction Faceplates sold separately UL 10C fire-rated, 3hr single door UL 10C fire-rated, 1-1/2hr double door UL1034, burglary resistant listed ANSI/BHMA A156.31, Grade 1 ANSI A windstorm listed Mfg # Latch Bolt Monitor Finish EZ # 1006 LBM 630 Yes Stainless Steel U BLK12/24VDC No Black series optional faceplates A Options: A AD A Options Latchbolt and deadbolt are released by a single keeper The keeper is held open to recapture the latchbolt and the deadbolt when the door is closed Not LBM/LBSM compatible A: For use with mortise locksets with a normally extended 1 deadbolt without a deadlatch Compatible locksets: Arrow, Baldwin, Marks, Omnia, PDQ, Schlage & others AD: For use with mortise locksets with a normally extended 1 deadbolt without a deadlatch Compatible locksets: Sargent (7700 & 8100 series), Schlage & Yale (8700) E Option: Mfg # Size EZ # A OPTION /8 x 1-1/ AD OPTION /8 x 1-1/ E Option After releasing the latchbolt/deadbolt, the keeper is held open and recaptures the bolt when the door is closed Not LBM/LBSM compatible Corbin/Russwin security bolt, Weiserbolt, and normally extended 1 tubular deadbolts h Mfg # Size EZ # E OPTION /8 x 1-1/

7 HES 1006 series optional faceplates 1006 series optional faceplates HD Option: HD Option Lockout feature - the electric strike will not release when the deadbolt is extended The deadbolt is retracted during traffic hours The latchbolt is released by the keeper, then it returns to the locked position For use with mortise locksets with a 1 deadbolt without a deadlatch Compatible locksets: Sargent (7700 & 8100 series), Schlage & Yale (8700) Mfg # Size EZ # HDOPTION /8 x 1-1/ J Options: J Options After releasing the latchbolt, the keeper returns to the locked position J: Cylindrical locksets up to 3/4 throw and all locksets with center-lined bolts J2: Cylindrical locksets with up to a 3/4 throw, in wood frame applications 4-7/8 x 1-1/4 Mfg # Size EZ # J OPTION /8 x 1-1/ J2OPTION630 9 x 1-3/ K Options: K Options After releasing the latchbolt, the keeper returns to the locked position KD: For use with mortise locksets with a deadlatch positioned above the latchbolt Compatible locksets: Jackson, Sargent (7700 & 8100), Schlage & Yale (8700) KM: For use with mortise locksets with a deadlatch position below the latchbolt Compatible locksets: Accurate, Arrow, Best*, Corbin/Russwin, Falcon (1992 M Series), Sargent (7800, 8200 & 9200 series) & Yale (8800) *For Best 45H & 47H deadlatch below, and Best 34H - 37H deadlatch above Mfg # Size EZ # KD OPTION /8 x 1-1/ KM OPTION /8 x 1-1/ H N Options: N Options The deadbolt is retracted during traffic hours The latchbolt is released by the keeper The keeper returns to the locked position If the deadbolt is extended, the keeper will not recapture it N: For use with mortise locksets where the deadbolt is used for night-latch function only Compatible locksets: Accurate, Arrow, Baldwin, Marks, Omnia, PDQ, Schlage & others ND: Mortise locksets where the deadbolt is used for night-latch function only Compatible locksets: Sargent (7700 & 8100 series), Schlage & Yale (8700) Mfg # Size EZ # N OPTION /8 x 1-1/ ND OPTION /8 x 1-1/

8 HES 4500, 5000 & 5200 series electric strikes 4500 Low Profile Heavy Duty Fire Rated Strike Updated and versatile low profile, heavy duty fire rated solution. The first electric strike designed for installation in 2 UL 10C fire-rated frames with 1/2 drywall penetration Its strength is derived from a unique keeper pin locking design, enabling the 4500 to exceed the ratings of the frame, door and locking hardware Includes offset & centreline faceplates Field selectable fail secure/fail safe Field selectable dual 12VDC/VAC or 24VDC/VAC.24 12VDC/VAC.12 24VDC/VAC Strike body depth: 1-3/8 Designed for use with cylindrical and mortise locksets up to a 3/4 throw For steel, aluminum & wood frame application Stainless steel construction UL 10C fire-rated, 3hr single door UL1034, burglary resistant listed ANSI/BHMA A156.31, Grade 1 With offset faceplate Mfg # Latch Projection EZ # / /2 To 5/ Low Profile & 5200 Adjustable electric Strikes For steel, aluminum & wood frame application Field selectable fail secure/fail safe Field selectable dual voltage 12VDC/VAC or 24VDC/VAC».24» 12VDC/VAC».12» 24VDC/VAC Stainless steel construction Trim enhancer included Faceplates sold separately UL1034, burglary resistant listed ANSI/BHMA A156.31, Grade series A compact, high performance electric strike designed for low profile openings where there is limited space behind the jamb Strike body depth: 1-1/16 Accommodates 1/2-5/8 latchbolt (5/8 with 1/8 door gap) 5200 Series The 5200 series raises the standard in adaptibility for electric strikes. All new innovative approach to in-frame horizontal adjustability The perfect fit for multiple applications Strike body depth: 1-3/16 Accommodates 5/8-3/4 latchbolt (3/4 with 1/8 door gap) h Mfg # Latch Projection EZ # /24VDC 1/2 To 5/ /24VDC 5/8 To 3/

9 5000 series optional faceplates HES 7000 series electric strikes, 5000 & 7000 series optional faceplates Operation: After releasing, the keeper returns to the locked position 501: For use with cylindrical locksets in ANSI metal jambs 502: For use with cylindrical locksets, includes universal mounting tabs For aluminum & wood frames 501 Option Option 630 Mfg # Size Corners EZ # 501OPTION /8 x 1-1/4 Square OPTION /16 x 1-7/16 Radius Series Pre-loaded Electric strikes Newly updated 7000 series features hardened stainless steel locking cams With improved pre-load handling and heavy-duty construction, it is ideal for high usage applications. For cylindrical locksets & rim exit devices Field selectable fail secure/fail safe Strike body depth: 1-11/16 Accommodates various types of latchbolts from 5/8 to 3/4 throw For steel, aluminum & wood frame application Stainless steel construction * Trim enhancer (791 and 792 options) Faceplates sold separately UL1034, burglary resistant listed ANSI/BHMA A156.31, Grade 1 with use of faceplate 791 or 792 * Grade 1 with use of FP791 or FP792 faceplates below Mfg # Voltage EZ # 7000U12D.45 12VDC Continuous Duty U24D.25 24VDC Continuous Duty Series optional Faceplates H Operation: after releasing latchbolt, the keeper returns to the locked position 791 option: For use with cylindrical locksets up to 5/8 throw Size: 4-7/8 x 1-1/4 792 option: For use with cylindrical locksets up to 5/8 throw Size: 7-15/16 x 1-7/16 Mfg # Size Corners Jambs EZ # * FP * FP FP /8 x 1-1/4 Square Metal Jambs FP /16 x 1-7/16 Radius Metal Jambs

10 HES 8000 & 8300 series electric strikes 8000 series Concealed Electric Strikes A compact, high performance electric strike No cutting on the frame and vertical adjustability accomodates door sag and misalignment Updated to ensure frame clearance in an even greater selection of frames, this product now fits within an ANSI frame prep set at all hinge and door spacings per SDI with no frame interference For cylindrical locksets Field selectable fail secure/fail safe Field selectable dual voltage 12VDC/VAC or 24VDC/VAC»».24 12VDC/VAC»».12 24VDC/VAC Strike body depth: 1-1/16 Accommodates 1/2-5/8 cylindrical latchbolt (5/8 with 1/8 door gap) For steel, aluminum & wood frame application Stainless steel construction Faceplate included UL1034, burglary resistant listed ANSI/BHMA A156.31, Grade 1 Mfg # Description EZ # / For Cylindrical Locks series Fire rated Concealed Electric Strikes A compact high performance concealed fire rated electric strike Fits into a standard 1 ANSI/BHMA A dustbox, with little or no modification to the frame, and offers vertical adjustability to accommodate door sag and misalignment Complies with NFPA guidelines for retrofit into fire-rated frames. For cylindrical locksets Field selectable fail secure/fail safe Field selectable dual voltage 12 or 24 VDC/VAC»».24 12VDC/VAC»».12 24VDC/VAC Strike body depth: 1-1/16 Accommodates 1/2-5/8 cylindrical latchbolt (5/8 with 1/8 door gap) For steel, aluminum & wood frame application Stainless steel construction Faceplate included UL 10C fire-rated, 3hr single door UL1034, burglary resistant listed ANSI/BHMA A156.31, Grade 1 h Mfg # Description EZ # / For Cylindrical Locks

11 HES 8500 Series Electric strikes & accessories 8500 series Concealed Electric Strikes The first concealed electric strike solution for mortise locksets Fits into low profile openings with no modification to the face of the frame The creative design of the HES 8500 helps manage some of the unique challenges of a mortise lock installation Field selectable fail secure/fail safe Field selectable dual voltage 12 or 24 VDC/VAC continuous duty»».24 12VDC/VAC»».12 24VDC/VAC Strike body depth: 1-5/16 Accommodates 3/4 mortise latchbolts For steel, aluminum & wood frame application Stainless steel construction Faceplate sold separately UL 10C fire-rated, 3hr single door UL1034, burglary resistant listed ANSI/BHMA A156.31, Grade 1 Mfg # Description EZ # /24D630 For Mortise Locks series Faceplates 851M For use with mortise locksets Operation: after release, the keeper returns to the locked position 851M Option: Compatible with mortise locksets: Sargent 8100, 8200 & K option: Compatible with mortise locksets: Corbin Russwin ML K H 852L option: Compatible with mortise locksets: Schlage L L Mfg # Size Corners EZ # 851M /8 x 1-1/4 Square K /8 x 1-1/4 Radius L /8 x 1-1/4 Radius

12 RCI 4 Series Electric Strikes 4 Series Commercial duty centreline electric strikes R Body only, faceplates sold separately ANSI-size faceplate: 1-1/4 x 4-7/8 Accommodates 3/4 latch projection (pullman design not included) Enlarged latch cavity width allows compatibility with cylindrical and centreline mortise locks (including 3-piece anti-friction type) and mortise exit devices 1-1/2 cut-out depth accommodates most aluminum and hollow metal frames Use with wide range of door thicknesses: 1-3/8 to 2-3/8 AC/DC input acceptable for all fail locked models. Fully reversible for right or left-hand doors Standard mounting tabs and fasteners included Unique anti-vibration design prevents manipulation by vibration Finish: Stainless steel UL 1034 burglary resistant (highest level) Meets ANSI/BHMA A Grade 1 MFG # Description EZ # A41 12V 12VAC/DC Body A41 16VAC 11-16VAC Body A41 24V 24VAC/DC Body Series Faceplates B For 4114 Use with centreline mortise exit devices, cylindrical or centreline mortise locks 1-1/4 x 4-7/8 B for 4104 Use with aluminum, cylindrical or centreline mortise locks and centreline mortise exit devices 1-1/4 x 4-7/8 B4714 B4704 B4705 B For 4105 Use with centreline mortise exit devices, aluminum, cylindrical or centreline mortise locks 1-1/8 x 5-7/8 B For 4107 Use with aluminum locks, cylindrical or centreline mortise locks and mortise exit devices 1-1/4 x 6-7/8 B For 4108 Use with aluminum locks, cylindrical or centreline mortise locks and centreline mortise exit devices 1-7/16 x 7-15/16 Mfg # For Frame Corners EZ # B D 4114 Hollow Metal Square B D 4104 Aluminum Round B4707 B4708 B D 4105 Aluminum/Wood Round B D 4107 Aluminum Round B D 4108 Aluminum/Wood Round

13 RCI F4 & 7 Series Electric Strikes F4 Series Fire rated commercial duty centreline Electric Strikes Accommodates 3/4 latch projection (pullman design not included) Enlarged latch cavity width allows compatibility with cylindrical, and centreline mortise locks (including 3-piece anti-friction type) and mortise exit devices 1-1/2 cut-out depth accommodates most aluminum and hollow metal frames Use with wide range of door thicknesses 1-3/8 to 2-3/8 AC/DC input acceptable for all fail locked models Fully reversible for right or left-hand doors Standard mounting tabs and fasteners included Unique anti-vibration design prevents manipulation by vibration ANSI-size faceplate: 1-1/4 x 4-7/8 Finish: stainless steel UL 1034 burglary resistant - highest level Meets ANSI/BHMA A Grade 1 Fire labeled - UL 10C: 1-1/2 hr Stainless steel faceplate included R Mfg # Voltage EZ # F D 12VDC F D 24VDC Series Adjustable Electric Strikes Body only, faceplates sold separately Accommodates 5/8 latch projection (pullman design not included) Unique anti-vibration design prevents manipulation by vibration Enlarged latch cavity width allows compatibility with cylindrical, narrowline aluminum and centreline mortise locks (including 3-piece anti-friction type) 1-1/2 cut-out depth accommodates most aluminum and wood frames Use with wide range of door thicknesses (1-3/8 to 2-3/8 ) AC/DC input acceptable for fail locked models Fail unlocked mode requires DC Standard mounting tabs, fasteners, and trim plate included 1/8 horizontal adjustment UL 1034 burglary resistant Modular design MFG # Description EZ # A71 12VDC 12VDC Body A71 24VDC 24VDC Body

14 RCI 7 Series Electric Strikes faceplate & 4 & Series jig 7 Series Faceplates R B4714 B4704 B4705 B For 7114 Use with centreline mortise exit devices, cylindrical or centreline mortise locks 1-1/4 x 4-7/8 B For 7104 Use with aluminum, cylindrical or centreline mortise locks and centreline mortise exit devices 1-1/4 x 4-7/8 B For 7105 Use with centreline mortise exit devices, aluminum, cylindrical or centreline mortise locks 1-1/8 x 5-7/8 B For 7107 Use with aluminum locks, cylindrical or centreline mortise locks and mortise exit devices 1-1/4 x 6-7/8 B For 7108 Use with aluminum locks, cylindrical or centreline mortise locks and centreline mortise exit devices 1-7/16 x 7-15/16 Mfg # For Frame Corners EZ # B D 7114 Hollow Metal Square B D 7104 Aluminum Round B4707 B4708 B D 7105 Aluminum/Wood Round B D 7107 Aluminum Round B D 7108 Aluminum/Wood Round & 7 Series Jig Frame prep jig for ANSI-sized electric strike For series 4104, 4114, 7104 & 7114 Mfg # Finish EZ # 4/7 JIG Aluminum

15 RCI 6 Series Electric Strikes 6 Series Heavy Duty Universal Electric Strikes Body only, faceplates sold separately Field selectable lock mode choose fail locked or fail unlocked with the turn of a dial (fail unlocked mode requires DC voltage) Field selectable voltage input accommodates 12 or 24VDC, and 12 to 24VAC, and even 16VAC in one strike Low profile version (L) is shallow enough for use with narrow stile aluminum frames only 1-1/16 deep, standard version (S) requires 1-3/16 frame depth 1/4 horizontal adjustment Modular plug-in wire connectors for fast hook-up Tested to over 1,000,000 cycles UL listed 1034 burglary resistant Modular plug-in wire connectors for fast hook-up AS65LMKM The latch monitor is a SPDT switch with a trigger located in the strike cavity to indicate the presence of a latch bolt when the door is closed The keeper monitor is a SPDT switch that will indicate when the keeper moves from the closed (normal) position to the open position NOTE: LMKM switches are rated at 2 24VDC R Mfg # Description Latch projection EZ # AL65 Low Profile Body 5/ AS65 Standard Profile Body 3/ AS65LMKM LMKM Standard Profile Body 3/ Series Universal Strike Faceplates b614 32d - for S6514-Standard/ L6514-Low Use wi th centreline mortise exit devices, cylindrical or centreline mortise locks 1-1/4 x 4-7/8 b604 32d - for S6504-Standard/ L6504-Low Use with aluminum, cylindrical or centreline mortise locks and centreline mortise exit devices 1-1/4 x 4-7/8 B604 B614 B605 b605 32d - for S6505-Standard/ L6505-Low Use with centreline mortise exit devices, aluminum. cylindrical or centreline mortise locks 1-1/8 x 5-7/8 b607 32d - for S6507-Standard/ L6507-Low Use with aluminum locks, cylundrical or centreline mortise locks and mortise exit devices 1-1/4 x 6-7/8 b608 32d - for S6508-Standard/ L6508-Low Use with aluminum locks, cylindrical or centreline mortise exit devices 1-7/16 x 7-15/16 B607 B608 Mfg # For Frame Corners EZ # B614 32D S6514/L6514 Hollow Metal Square B604 32D S6504/L6504 Aluminum Round B605 32D S6505/L6505 Aluminum/Wood Round B607 32D S6507/L6507 Aluminum/Wood Round B608 32D S6508/L6508 Aluminum/Wood Round

16 F2 Series Fire rated commercial duty centreline Electric Strikes RCI F2 Series fire rated & 15 series economy Electric Strikes R Modular design allows compatibility with most locks without having to order special faceplates Includes offset and centreline faceplates Adjustable deadbolt keeper and deadlatch ramp Heavy-duty stainless steel construction Up to 1500 lbs (680 kg) holding force Fits HES 1006 (1003) frame cutout Accommodates 3/4 latch projection Faceplate and anti-tamper security screws included for centreline latch entry Unique sliding shim design for up to 1/8 (3mm) horizontal adjustment for misaligned frames Vertical adjustability of strike for precise positioning of lockset Accommodates up to 1 deadbolt; night-latch function only, bolt will not release Field selectable voltage input accommodates 12 or 24VDC and 12 to 24VAC Hex and security driver bit included Low current draw (0.19 Cool Keeper solenoid design prevents keeper from heating up Plug-in wire connector Trim plate included UL 10C, 3 hour fire-rated (fail secure only), 1034, burglary resistant listed Factory tested to meet ANSI/BHMA for strength and endurance Mfg # For Finish EZ # F2164 Centreline Latch Entry Stainless Steel Series Economy Strikes 5/8 latch projection Fail locked For hollow metal, aluminum and wood Voltage: VAC Size: 1-1/4 x 5-7/8 15BS Replaces Edwards #9 15CA Replaces Peso BS 15CA Mfg # For Faceplate EZ # 15BS01 26D Special Offset Latch Entry Satin Chrome CA01 28 Centreline Latch Entry Aluminum

17 3000 Series Low Profile Strikes Trine Access Low Profile Strike, Thin Rim Exit Strike & Door Signal Kit t Often requires up to 70% less cutting of the frame face as compared to conventional electric strikes An electric strike with a 1 total backset for installation without the removal of most dust boxes. Holding force: 1200 lbs Life cycle: 500,000 Fail secure Stocked intermittent duty only All stainless steel locking mechanism Mfg # Finish Voltage EZ # Fits ANSI 115.3, 2-3/4, T Style VDC26D Satin Chrome 12VDC VDC26D Satin Chrome 24VDC /2 Thin Rim Exit Device Strike 1/2 profile is 1/4 thinner than standard surface mount rim exit device strikes for applications where the door to frame gap is minimal Voltage: Built in electronics allow the strike to operate with DC voltages between volts Built-in surge and kick-back protection Patented anchoring system provides extra strength 1/8 steel spacer included when 5/8 profile is required Grade 1 all stainless steel construction Requires 500 ma pull-in & 178mA holding 12VDC, 255mA pull-in & 24VDC Measures: 9 H x 3/4 W x 1/2 D Mfg # Finish EZ # D Stainless Steel WIRELESS Entry/Exit Signal Kit 1 note, 2 note or 8 note melody chime, field selectable Wireless battery-operated door contact switch A-23 battery (included) Up to 100ft range selectable codes Receiver plugs into 120 VAC outlet Transmitter mounting hardware provided Adjustable volume control 74db (low) 82db 3ft UL recognized, FCC-IC approved Mfg # EZ #

18 Von Duprin 5100, 6100 & 6200 Electric Strikes 5100 Multi-Function Series Voltage: 12 or 24 VDC continuous duty Fail safe or fail secure, easily changed in less than thirty seconds Includes mounting tabs & neoprene filler plate 1300 lbs pounds of holding strength Keeper depth of 1 2 : Accommodates latches up to 5/8 throw Tested to over one million cycles Faceplates included: ANSI round corner, ANSI square corner, long, round corner wood frame prep Adjustable keeper provides a snug fit and reduces pressure from the door on the strike Mfg # EZ # & 6200 Heavy Duty Strikes 1 5 /8" 1 /2" 15/8" 6" 2 3 /16" 4 1 /2" 7 /8" 1 3 /8" 13 /16" 6111 Minimum Clearance Stainless steel construction Accepts 3 4 throw latchbolt Fail secure Horizontally adjustable Plug connectors V 1 5 /8" 9" 3 /4" 2 9 /16" 1 5 /8" 7 9 /8" /16" 4 1 /2" Minimum Clearance 6111 For use with rim exit devices on single doors or double doors with mullion applications For hollow metal, aluminum or wood 6112 For use with rim exit devices on single door applications For hollow metal, aluminum or wood 6211 Electric strike for use with mortise locks without deadbolt or cylindrical locks on single door, hollow metal frames /4" 1 11 /16" 1 15 /32" 1 3 /8" 4 7 /8" 3 3 /8" 2 1 /6" 7 /8" 1 /2" 1 /8" 12" Minimum Clearance 6211 Mfg # For Voltage EZ # D12VDC Rim Exit Devices 12VDC Fail Secure D24VDC Rim Exit Devices 24VDC Fail Secure VDC 630 Rim Exit Devices 12VDC Fail Secure D24VDC Rim Exit Devices 24VDC Fail Secure D24VDC Cylindrical Or Mortise 24VDC Fail Secure