GSA Price List. October 25, Contract Number: GS27F034DA

Transcription

1 GSA October 25, 2016 Contract : GS27F034DA

2 Content es Tables Casegoods Table Accessories - Forums Seating Nienkamper GSA 10/25/2016 1

3 WOOD VENEER/FINISHES - TABLES & CASEGOODS WOOD FINISH OPTIONS All wood surfaces are protected with a durable polyurethane clear laquer with UV inhibitor. This finish is known for its exceptional durability, as well as abrasion-, chemical-, impact- and scratch- resistance. Standard sheen level is 45 degrees unless otherwise noted below. Optional 10 and 35 degree sheen levels are available on request at no additional cost. Wood Veneer samples are available from your local sales representative, or by calling Nienkamper customer service at Wood Species Order Code Veneer/Stain Upcharge Maple F-01 Natural Maple No upcharge applies. F-04 Maple Stained Pear No upcharge applies. Cherry F-05 Natural Cherry No upcharge applies. F-06 Standard Cherry No upcharge applies. F-07 Cherry Stained Amber No upcharge applies. F-08 Cherry Stained Auburn No upcharge applies. F-09 Cherry Stained Burgundy No upcharge applies. Mahogany F-10 Light Mahogany No upcharge applies. F-11 Medium Mahogany No upcharge applies. F-12 Dark Mahogany No upcharge applies. F-13 Red Mahogany No upcharge applies. Walnut F-17 Burnt Walnut (35 sheen) No upcharge applies. F-19 Natural Walnut No upcharge applies. F-24 Carbon Grey Walnut No upcharge applies. White Oak F-18 Natural White Oak - Flat Cut Book Match (10 sheen) No upcharge applies. Sapele Ribbon Stripe F-20 Natural Ribbon Stripe Sapele - Qtr. Cut Slip-Match No upcharge applies. Moabe (Cherry substitute) F-21 Natural Moabe - Qtr. Cut Book-Match No upcharge applies. Cape Coast Walnut F-22 Dark Cape Coast Walnut - Qtr. Cut Slip-Match No upcharge applies. F-23 Natural Cape Coast Walnut - Qtr. Cut Slip-Match No upcharge applies. Ash F-25 Slate Grey Ash - Qtr.-Cut Slip-Match No upcharge applies. VENEER GRAIN OPTIONS Nienkämper products utilize the best quality veneers available, and, combined with Nienkämper s patented veneering systems, create work environments of incredible quality and beauty. All Nienkämper furniture comes standard with flat-cut book-match veneer; flat-cut slip-match veneer can also be specified. Quarter-cut slip-match and quarter-cut book-match veneers are available at a 5% upcharge. Facet edge, Taper edge tops with veneer are manufactured with a solid wood edge to create a seamless profile top. Standard Flat Cut Book-Match V1 Flat Cut Slip-Match V2 V3 Quarter Cut Slip-Match Add 5% V4 Quarter Cut Book-Match Add 5% Nienkamper GSA 10/25/2016 2

4 WOOD GRAIN PLASTIC LAMINATE SURFACES - TABLES & CASEGOODS Wood grain plastic laminate surfaces are available on Nienkämper tops with Facet and Taper edges. These tops are manufactured with a solid wood edge that is applied prior to the laminate top surface. This method conceals the thickness of the wood edge, while providing the durability required. Wood edges are selected that most closely resemble both the species and the color of the laminate chosen Nienkämper has pre-selected a number of standard wood grain plastic laminates that represent a cross section of both color and species. Simply include the order code with the model number to make these selections. Alternatively wood grain plastic laminates selected outside of Nienkämper s standard selection can be made by specifying the manufacturer as well as the description and model number of the laminate at the time of order. Note: for Facet edge tops the laminate must be a post-forming grade. Wood Grain Plastic Laminate Laminate Surfaces Order code Manufacturer # CHAMPAGNE SAGAWOOD HARDROCK MAPLE AMBER CURLY MAPLE ANAGRE MONTICELLO MAPLE MILLWORK CHERRY FIGURED ANAGRE HUNTINGTON MAPLE WILD CHERRY AMBER CHERRY FIGURED MAHOGANY FUSION MAPLE NEW AGE OAK NATURAL PEAR TUSCAN WALNUT NEPAL TEAK WILD CHERRY RIVER CHERRY MONTANA WALNUT SANARA WINDSOR MAHOGANY WILLIAMSBURG CHERRY FLORENCE WALNUT SKYLINE WALNUT STERLING ASH WL 1 WL 2 WL 3 WL 4 WL 5 WL 7 WL 8 WL 9 WL 10 WL 11 WL 12 WL 13 WL 14 WL 15 WL 16 WL 17 WL 18 WL 19 WL 20 WL 21 WL 22 WL 23 WL 25 WL 26 WL 27 Nevamar WM8349T Pionite WM791-N Pionite WM221-N Pionite WX041-N Wilsonart Pionite WC431H Formica Wilsonart Formica Wilsonart Wilsonart 7040A-60 Wilsonart Wilsonart Wilsonart Wilsonart Wilsonart Wilsonart Wilsonart Wilsonart Wilsonart Wilsonart Wilsonart Wilsonart Wilsonart 7964K-12 Wilsonart Textured Suede Suede Suede Fine Velvet Texture Hi-Brite Matte Fine Velvet Texture Artisan Fine Velvet Texture Matte Fine Grain Fine Grain Fine Grain Fine Grain Fine Grain Fine Grain Fine Grain Fine Grain Fine Grain Fine Grain Fine Grain Fine Grain Soft Grain Fine Grain To specify the wood grain laminate required, simply add the Order Code WL_ to the model number of the product. Wood-grain plastic laminate samples are available from Nienkämper by calling Nienkämper s Customer Service department at Nienkamper GSA 10/25/2016 3

5 COLORED PLASTIC LAMINATE SURFACES - TABLES & CASEGOODS COLORED LAMINATE Both Taper and Facet edge profiles are available with a colored laminate top. Laminate edging on Taper tops. Edging will match the top surface and is applied prior to the surface laminate. By applying the laminate in this way the seam is positioned horizontally, is much less conspicuous as well as more durable. Wood edging on Facet and Taper Edge tops is applied prior to the laminate. By applying the wood edge in this way the thickness of the wood edge is concealed, while providing the durability required. Wood species and finishes for edging, can be selected from page 10. For laminates specified outside of Nienkämper s standard selection, specify the manufacturer as well as the description and model number of the laminate selected at time of order. For Facet edge tops, the laminate must be a post-forming grade. Colored Plastic Laminate samples are available from Nienkämper by calling Nienkämper Customer Service Department at Coloured Plastic Laminate Surface Order Code Manufacturer # Grey (Nienkamper - Light Grey/Putty) CL-01 Wilsonart Matte Plantinum Grey (Nienkamper - Medium Grey/Clay) CL-02 Nevamar S6023T Textured Slate Grey (Nienkamper - Dark Grey) CL-03 Wilson D91-60 Matte Black CL-04 Wilsonart Matte Angel White CL-05 Pionite SW-826N Suede Frosty White CL-06 Wilsonart Matte ALUMINUM FINISHES - TABLES & CASEGOODS ALUMINUM FINISHES Anodized Aluminum es Silver Champagne Light Bronze Bronze Black Order Code AL-01 AL-02 AL-03 AL-04 AL-05 Simply specify the finish of choice when placing your order. Anodized aluminum finish samples are available from Nienkämper by callling Nienkämper s Customer Service department, at Nienkamper GSA 10/25/2016 4

6 SIN#: TABLES AND ACCESSORIES VOX CONFERENCE TABLES RECTANGLE shape DESIGN MARK MÜLLER Specify edge type; add the two letter code after the model number. Facet Edge FC Taper Edge TE Flowform Edge FF 5% upcharge laminate not available * Based on a chair width of 25. Camber Edge CE 5% upcharge DUO BASE Anodized Aluminum Base Ends L x D Sugg Seat Capacity* # of Bases Base Size Wood / , P-Lam / , Wood / , P-Lam / , Wood / , Wood / , Wood / ,300 TAPER BASE Metallic Silver Paint L x D Sugg Seat Capacity* # of Bases Base Size Wood / , P-Lam / , Wood / , P-Lam / , Wood / , Wood / , Wood / ,965 T BASE Anodized L x D Sugg Seat Capacity* # of Bases Base Size Wood / , P-Lam / , Wood / , P-Lam / , Wood / , Wood / , Wood / ,185 Nienkamper GSA 10/25/2016 5

7 SIN#: TABLES AND ACCESSORIES VOX CONFERENCE TABLES BOAT shape DESIGN MARK MÜLLER Specify edge type; add the two letter code after the model number. Facet Edge FC Taper Edge TE Flowform Edge FF 5% upcharge laminate not available * Based on a chair width of 25. Camber Edge CE 5% upcharge DUO BASE Anodized Aluminum Base Ends L x D Sugg Seat Capacity* # of Bases Base Size Wood / , P-Lam / , Wood / , P-Lam / , Wood /2 3 24, 26 10, Wood /2 3 26, 32 15, Wood /2 4 30, 36 25,910 TAPER BASE Metallic Silver Paint L x D Sugg Seat Capacity* # of Bases Base Size Wood / , P-Lam / , Wood / , P-Lam / , Wood / , Wood / , Wood / ,570 T BASE Anodized L x D Sugg Seat Capacity* # of Bases Base Size Wood / , P-Lam / , Wood / , P-Lam / , Wood / , Wood / , Wood / ,800 Nienkamper GSA 10/25/2016 6

8 SIN#: TABLES AND ACCESSORIES VOX CONFERENCE TABLES ROUND shape DESIGN MARK MÜLLER Specify edge type; add the two letter code after the model number. Facet Edge FC Taper Edge TE Flowform Edge FF 5% upcharge laminate not available * Based on a chair width of 25. Camber Edge CE 5% upcharge QUAD BASE Anodized L x D Sugg Seat Capacity* # of Bases Base Size 42 dia. 3-5 Wood / , dia. 3-5 P-Lam / , dia. 3-5 Wood / , dia. 3-5 P-Lam / , dia. 4-6 Wood / , dia. 4-6 P-Lam / , dia 5-7 Wood / , dia. 5-7 P-Lam / ,095 TAPER LEGS Metallic Silver Paint L x D Sugg Seat Capacity* # of Bases Base Size 42 dia. 3-5 Wood / , dia. 3-5 P-Lam / , dia. 3-5 Wood / , dia. 3-5 P-Lam / , dia. 4-6 Wood / , dia. 4-6 P-Lam / , dia 5-7 Wood / , dia. 5-7 P-Lam / ,005 Nienkamper GSA 10/25/2016 7

9 SIN#: TABLES AND ACCESSORIES VOX CONFERENCE TABLES SQUARE shape DESIGN MARK MÜLLER Specify edge type; add the two letter code after the model number. Facet Edge FC Taper Edge TE Flowform Edge FF 5% upcharge laminate not available * Based on a chair width of 25. Camber Edge CE 5% upcharge QUAD BASE Anodized L x D Sugg Seat Capacity* # of Bases Base Size 42 dia. 2-4 Wood / , dia. 2-4 P-Lam / , dia. 2-4 Wood / , dia. 2-4 P-Lam / , dia. 4-6 Wood / , dia. 4-6 P-Lam / , dia 6-8 Wood / , dia. 6-8 P-Lam / ,965 TAPER LEGS Metallic Silver Paint L x D Sugg Seat Capacity* # of Bases Base Size 42 dia. 2-4 Wood / , dia. 2-4 P-Lam / , dia. 2-4 Wood / , dia. 2-4 P-Lam / , dia. 4-6 Wood / , dia. 4-6 P-Lam / , dia 6-8 Wood / , dia. 6-8 P-Lam / ,720 Nienkamper GSA 10/25/2016 8

10 SIN#: TABLES AND ACCESSORIES METRONOME TM TABLES DESIGN FIGFORTY Specify edge type; add the two letter code after the model number. Taper Edge TE Self Edge SE Facet Edge FE Anodized Legs * Based on a chair width of 25. RECTANGLE 2 Supports 3 Supports L x D Sugg Seat Capacity* L x D Sugg Seat Capacity* Veneer /2 4, Laminate /5 3, Veneer /2 5, Laminate /5 4, Veneer /2 7, Laminate /5 6, Veneer /2 9, Laminate /5 7, Veneer /2 10, Laminate /5 8,325 BOAT 2 Supports 3 Supports L x D Sugg Seat Capacity* L x D Sugg Seat Capacity* Veneer /2 4, Laminate /5 4, Veneer /2 5, Laminate /5 4, Veneer /2 8, Laminate /5 7, Veneer /2 10, Laminate /5 8, Veneer /2 11, Laminate /5 9,000 Nienkamper GSA 10/25/2016 9

11 SIN#: TABLES AND ACCESSORIES METRONOME TM DESIGN FIGFORTY TABLES Specify edge type; add the two letter code after the model number. Taper Edge TE Self Edge SE Facet Edge FE Anodized Legs * Based on a chair width of 25. ROUND 2 Supports L x D Sugg Seat Capacity* Veneer /2 2, Laminate /5 2, Veneer /2 3, Laminate /5 2, Veneer /2 4, Laminate /5 3,345 SQUARE 2 Supports L x D Sugg Seat Capacity* Veneer /2 2, Laminate /5 2, Veneer /2 3, Laminate /5 2, Veneer /2 4, Laminate /5 3,345 Nienkamper GSA 10/25/

12 SIN#: TABLES AND ACCESSORIES GATEWAY TM DESIGN BUSK + HERTZOG TABLES Specify edge type; add the two letter code after the model number. Facet Edge FC Taper Edge TE Flowform Edge FF 5% upcharge Anodized Legs laminate not available * Based on a chair width of 25. Camber Edge CE 5% upcharge Self Edge SE RECTANGLE 2 Bases 3 Bases L x D Sugg Seat Capacity* L x D Sugg Seat Capacity* Veneer /2 6, Laminate /5 5, Veneer /2 7, Laminate /5 5, Veneer /2 9, Laminate /5 7, Veneer /2 12, Laminate /5 10, Veneer /2 14, Laminate /5 11,205 BOAT 2 Bases 3 Bases L x D Sugg Seat Capacity* L x D Sugg Seat Capacity* Veneer /2 5, Laminate /5 4, Veneer /2 6, Laminate /5 5, Veneer /2 8, Laminate /5 6, Veneer /2 11, Laminate /5 8, Veneer /2 13, Laminate /5 9,910 Nienkamper GSA 10/25/

13 SIN#: TABLES AND ACCESSORIES GATEWAY TM DESIGN BUSK + HERTZOG TABLES Specify edge type; add the two letter code after the model number. Facet Edge FC Anodized Legs Taper Edge TE Flowform Edge FF 5% upcharge laminate not available * Based on a chair width of 25. Camber Edge CE 5% upcharge Self Edge SE ROUND L x D Veneer /2 2, Laminate /5 2, Veneer /2 3, Laminate /5 2, Veneer /2 3, Laminate /5 3, Veneer /2 3, Laminate /5 3, Veneer /2 4, Laminate /5 3,575 SQUARE L x D Veneer /2 2, Laminate /5 2, Veneer /2 3, Laminate /5 2, Veneer /2 3, Laminate /5 3, Veneer /2 3, Laminate /5 3, Veneer /2 4, Laminate /5 3,575 Nienkamper GSA 10/25/

14 SIN#: TABLES AND ACCESSORIES VOX FLIPTOP TM MEETING TABLES Flush Legs DESIGN MARK MULLER Wood veneer tables are standard with a 1/8 solid wood edge that has a slight radius. P-lam tables are standard with a 1/8 translucent edging that has a slight radius. s are 1 thick. FLUSH LEGS Anodized L x D x H 2 T-Bases Veneer 56131/ , Laminate 56132/ , Veneer 56135/ , Laminate 56136/ , Veneer 56139/ , Laminate 56140/ , Veneer 56151/ , Laminate 56152/ , Veneer 56155/ , Laminate 56155/ , Veneer 56159/ , Laminate 56160/ ,130 INSET LEGS Anodized L x D x H 2 T-Bases Veneer 56428/ , Laminate 56428/ , Veneer 56430/ , Laminate 56430/ , Veneer 56432/ , Laminate 56432/ , Veneer 56440/ , Laminate 56440/ , Veneer 56442/ , Laminate 56442/ , Veneer 56444/ , Laminate 56444/ ,130 Nienkamper GSA 10/25/

15 SIN#: TABLES AND ACCESSORIES METRONOME TM FLIPTOP TABLE With No Modesty Panel DESIGN FIGFORTY Tables shown on this page are standard with Metronome base, locking casters, no modesty panel and 1 thick top. Wood tables have 1/8 solid wood self edge. P-lam tables have 1/8 translucent edge. Self Edge SE FLUSH LEGS Anodized L x D x H Veneer 30668/2 2, Laminate 30650/5 1, Veneer 30670/2 2, Laminate 30670/5 2, Veneer 30672/2 2, Laminate 30672/5 2, Veneer 30674/2 2, Laminate 30674/5 2, Veneer 30676/2 2, Laminate 30676/5 2, Veneer 30678/2 2, Laminate 30678/5 2,320 INSET LEGS Anodized L x D x H Veneer 30704/2 2, Laminate 30704/5 1, Veneer 30706/2 2, Laminate 30706/5 2, Veneer 30708/2 2, Laminate 30708/5 2, Veneer 30710/2 2, Laminate 30710/5 2, Veneer 30712/2 2, Laminate 30712/5 2, Veneer 30714/2 2, Laminate 30714/5 2,320 Nienkamper GSA 10/25/

16 SIN#: TABLES AND ACCESSORIES PIVOT TABLE With No Modesty Panel DESIGN NIENKAMPER Tables shown on this page are standard with Metronome base, locking casters, no modesty panel and 1 thick top. Wood tables have 1/8 solid wood self edge. P-lam tables have 1/8 translucent edge. Self Edge SE FLUSH LEGS Polished Chrome L x D x H Veneer 82006/2 1, Laminate 82006/5 1, Veneer 82008/2 2, Laminate 82008/5 1, Veneer 82010/2 2, Laminate 82010/5 1,695 INSET LEGS Polished Chrome L x D x H Veneer 82018/2 1, Laminate 82018/5 1, Veneer 82020/2 2, Laminate 82020/5 1, Veneer 82022/2 2, Laminate 82022/5 1,695 Nienkamper GSA 10/25/

17 SIN#: EXECUTIVE CONFERENCE ROOM FURNITURE, COORDINATED TABLES, CASE PIECES & ACCESSORIES VOX CREDENZA ON GLIDES DESIGN MARK MÜLLER Self Edge SE L x D x H Cabinet Product Description 23 1/ /4 Wood Wood *23501/2 2, / /4 Wood Laminate 23501/5 2,555 Standard finish options are selected by model number and include: Wood case with wood top Wood case with laminate top Choose standard wood veneers and plastic laminates from pages / /4 Wood Wood *23502/2 3, / /4 Wood Laminate 23502/5 3,385 Credenza doors include aluminum trim around the perimeter that is available in all of the standard aluminum finishes on page 4. Doors are standard with push latches. A variety of optional pulls are specified on page / /4 Wood Wood *23503/2 5, / /4 Wood Laminate 23503/5 4, deep credenzas cannot accommodate refrigerators and equipment storage racks. Standard features: Easily leveled from interior of cabinet One adjustable shelf per opening is self-edged on four sides Single pedestal interior dimensions: 20 deep: 22 W x 18 1/8 D x 28 3/4 H 94 3/ /4 Wood Wood **23504/2 5, / /4 Wood Laminate 23504/5 5,595 *Cabinet in 1 piece, top in 1 piece. **Cabinet in 2 pieces, top in 1 piece. Vox four-pedestal credenza in walnut veneer with silver anodized aluminum trim. Nienkamper GSA 10/25/

18 SIN#: EXECUTIVE CONFERENCE ROOM FURNITURE, COORDINATED TABLES, CASE PIECES & ACCESSORIES VOX CREDENZA ON GLIDES DESIGN MARK MÜLLER Self Edge SE L x D x H Cabinet Product Description /4 Wood Wood **23505/2 7, /4 Wood Laminate 23505/5 6,740 Standard finish options are selected by model number and include: Wood case with wood top Wood case with laminate top Choose standard wood veneers and plastic laminates from pages 2-4. Credenza doors include aluminum trim around the perimeter that is available in all of the standard aluminum finishes on page / /4 Wood Wood **23506/2 8, / /4 Wood Laminate 23506/5 7,810 Doors are standard with push latches. A variety of optional pulls are specified on page deep credenzas cannot accommodate refrigerators and equipment storage racks. Standard features: Easily leveled from interior of cabinet One adjustable shelf per opening is self-edged on four sides Single pedestal interior dimensions: 20 deep: 22 W x 18 1/8 D x 28 3/4 H 165 1/ /4 Wood Wood ***23507/2 9, / /4 Wood Laminate 23507/5 8, / /4 Wood Wood ****23508/2 10, / /4 Wood Laminate 23508/5 9,780 *Cabinet in 1 piece, top in 1 piece. **Cabinet in 2 pieces, top in 1 piece. ***Cabinet in 2 pieces, top in 2 pieces. ****Cabinet in 3 pieces, top in 2 pieces. Nienkamper GSA 10/25/

19 SIN#: EXECUTIVE CONFERENCE ROOM FURNITURE, COORDINATED TABLES, CASE PIECES & ACCESSORIES VOX CREDENZA ON LEGS /4 HIGH DESIGN MARK MÜLLER Self Edge SE L x D x H Cabinet Product Description 47 3/ /4 Wood Wood *28764/2 3, / /4 Wood Laminate 28764/5 3,340 Standard finish options are selected by model number and include: Wood case with wood top Wood case with laminate top Choose standard wood veneers and plastic laminates from pages / /4 Wood Wood **28765/2 6, / /4 Wood Laminate 28765/5 6,000 Credenza doors include aluminum trim around the perimeter that is available in all of the standard aluminum finishes on page 4. Doors are standard with push latches. A variety of optional pulls are specified on page deep credenzas cannot accommodate refrigerators and equipment storage racks / /4 Wood Wood ***28766/2 9, / /4 Wood Laminate 28766/5 9,280 Standard features: Easily leveled from interior of cabinet One adjustable shelf per opening is self-edged on four sides Single pedestal interior dimensions: 20 deep: 22 W x 18 1/8 D x 28 3/4 H *Cabinet in 1 piece, top in 1 piece. **Cabinet in 2 pieces, top in 1 piece. ***Cabinet in 2 pieces, top in 2 pieces. Nienkamper GSA 10/25/

20 SIN#: EXECUTIVE CONFERENCE ROOM FURNITURE, COORDINATED TABLES, CASE PIECES & ACCESSORIES VOX BOARDROOM CREDENZAS ON GLIDES DESIGN MARK MÜLLER Facet Edge FC L x D x H Cabinet Product Description 25 1/ /4 Wood Wood *29731/2 2, / /4 Wood Laminate 29731/5 2, / /4 Wood Wood *29732/2 3, / /4 Wood Laminate 29732/5 3, / /4 Wood Wood *29733/2 5, / /4 Wood Laminate 29733/5 5,055 Standard finish options are selected by model number and include: Wood case with wood top Wood case with laminate top Choose standard wood veneers and plastic laminates from pages 2-4. Credenza doors include aluminum trim around the perimeter that is available in all of the standard aluminum finishes on page 4. Doors are standard with push latches. A variety of optional pulls are specified on page deep credenzas cannot accommodate refrigerators and equipment storage racks. 96 3/ /4 Wood Wood **29734/2 6, / /4 Wood Laminate 29734/5 5,950 Standard features: Easily leveled from interior of cabinet One adjustable shelf per opening is self-edged on four sides Single pedestal interior dimensions: 20 deep: 22 W x 18 1/8 D x 28 3/4 H /4 Wood Wood **29735/2 7, /4 Wood Laminate 29735/5 7, / /4 Wood Wood ***29736/2 8, / /4 Wood Laminate 29736/5 8,295 Vox Boardroom four peddestal credenza with Natural Cherry finish / /4 Wood Wood ****29737/2 9, / /4 Wood Laminate 29737/5 9, / /4 Wood Wood ****29738/2 11, / /4 Wood Laminate 29738/5 10,455 Nienkamper GSA 10/25/ *Cabinet in 1 piece, top in 1 piece. **Cabinet in 2 pieces, top in 1 piece. ***Cabinet in 2 pieces, top in 2 pieces. ****Cabinet in 3 pieces, top in 2 pieces.

21 SIN#: EXECUTIVE CONFERENCE ROOM FURNITURE, COORDINATED TABLES, CASE PIECES & ACCESSORIES VOX CREDENZA DRAWER/DOOR PULL SPECIFICATIONS DESIGN MARK MÜLLER L x H x D Product Description FLUSH PULL - PAINT FINISH Silver Champagne Light Bronze FP-S 2 1 3/4 1/16 FP-C FP-LB The Flush Pull is cast stainless steel finished in standard paint finishes to match the cabinets. When ordering pulls, add the drawer pull code to the end of the model number of the cabinet selected. Flush pulls are horizontal on credenza fronts, vertical on closet fronts. FLUSH PULL 2 - PAINT FINISH Silver Champagne FP2-S 4 1 / /8 3/16 FP2-C The Flush Pull 2 is die cast zinc and is finished in a metallic silver or champagne paint, supplied in two sizes scaled to fit the cabinet fronts. When ordering pulls, add the drawer pull code to the end of the model number of the cabinet selected. Flush pulls are horizontal on credenza fronts, vertical on closet fronts. SWIVEL PULL - PAINT FINISH Silver Champagne Light Bronze SP-S 1 1/8 1 3/4 1/16 SP-C SP-LB The Swivel Pull is cast stainless steel finished in standard paint finishes to match the cabinets. When ordering pulls, add the drawer pull code to the end of the model number of the cabinet selected. LARGE SWIVEL PULL - STAINLESS STEEL Fine Brushed LSP-FBS 5 1/2 2 3/4 1/16 The Large Swivel Pull is die-cast zinc, finished in a smooth fine brushed stainless steel. Pushing lightly on the top of the centre component swivels the handle outword to grasp. Once the user lets go of the pull it swivels back into flush position. When ordering pulls, add the drawer pull code to the end of the model number of the cabinet selected BAR PULL - STAINLESS STEEL Satin BP-BSS 13 3/8-19 5/8 3/8 1 1/2 The Satin-finished Stainless Steel Bar Pull is supplied in two sizes scaled to fit the cabinet fronts. All bar pulls run horizontally on credenza fronts, and vertically on closet fronts. When ordering pulls, add the drawer pull code to the end of the model number of the cabinet selected. BAR PULL - ANODIZED ALUMINUM Silver Champagne Light Bronze BP-S /8 1 1/2 BP-C BP-LB The anodized aluminum Bar Pull is supplied in two sizes scaled to fit the cabinet fronts. All bar pulls run horizontally on credenza fronts and vertically on closet fronts. Available in three standard anodized aluminum finishes to match cabinets. When ordering pulls, add the drawer pull code to the end of the model number of the cabinet selected. Nienkamper GSA 10/25/

22 VOX CREDENZA - PULL LOCATIONS DESIGN MARK MÜLLER FLUSH PULL Flush Pull FP-S SWIVEL PULL Swivel Pull SP-S BAR PULL Aluminum Bar Pull BP-S, 14 Aluminum Bar Pull BP-S, 20 Nienkamper GSA 10/25/

23 SIN#: EXECUTIVE CONFERENCE ROOM FURNITURE, COORDINATED TABLES, CASE PIECES & ACCESSORIES SIMPLE CREDENZAS ON GLIDES DESIGN NIENKAMPER Self Edge SE L x D x H Cabinet Product Description 23 5/ /4 Wood Wood *36101/2 2, / /4 Wood Laminate 36101/5 2,035 Standard finish options are selected by model number: Wood case with wood top Wood case with laminate top Doors have chrome pull as standard. 47 1/ /4 Wood Wood *36102/2 2, / /4 Wood Laminate 36102/5 2,695 Cabinets are bult in sections not exceeding three pedestal widths with tops shipped separately. s longer than 118 in length are made in two pieces. Standard features: One adjustable shelf per opening Self edge on four sides Single pedestal interior dimension: 20 deep: 22 w x 18 1/8 d x 30 5/8 Polished chrome pull 70 7/ /4 Wood Wood *36103/2 3, / /4 Wood Laminate 36103/5 3, / /4 Wood Wood **36104/2 4, / /4 Wood Laminate 36104/5 4, / /4 Wood Wood **36105/2 5, / /4 Wood Laminate 36105/5 5, / /4 Wood Wood ***36106/2 6, / /4 Wood Laminate 36106/5 6,220 *Cabinet in 1 piece, top in 1 piece. **Cabinet in 2 pieces, top in 1 piece. ***Cabinet in 2 pieces, top in 2 pieces. # 36104/2 SIMPLE four pedestal credenza with Natural Cherry finish. Nienkamper GSA 10/25/

24 SIN#: WORKSURFACES, WORKSTATIONS, COMPUTER, FURNITURE & ACCESSORIES VOX FORUM DESIGN MARK MULLER U L US C Nienkämper is a recognized installer for data systems described in Vox Forum products. Vox Forums can be manufactured with several factory wired data systems including Amp, Systimax, Siemon, Beldon, Ortronics and Hubbel. All of these systems are designed from tip to tail with those components that are called out for these communications systems which guarantee the highest level of Category 5e, Category 6 or Category 6A transmissions. Vox Forum products have been tested by the independent laboratories of these companies and are compliant with all aspects of proper installation and performance. Nienkämper recommends the use of these pre-wired systems as they offer the best value, quality and safety. Options for data/voice connections Pair 2 Pair 2 Pair 3 Pair 1Pair Pair 3 4Pair 1 Pair 4 Pair 2 Pair 2 Pair 3 Pair 1Pair Pair 3 4Pair 1 Pair 4 SYSTIMAX T568A T568A CAT 5E System or CAT 6 110Connect Jacks T568A T568A PowerSUM CAT 5E System or GigaSPEED CAT 6 System Pair 2 Pair 2 Pair 3 Pair 1 Pair 4Pair 3 Pair 1 Pair 4 SYSTIMAX Pair 2 Pair 2 Pair 3 Pair 1 Pair 4 Pair 3 Pair 1 Pair 4 Pai T568A T568A Max 5 e or Max T568A T568A 1 T Nienkamper GSA 10/25/

25 SIN#: WORKSURFACES, WORKSTATIONS, COMPUTER, FURNITURE & ACCESSORIES VOX FORUM DESIGN MARK MULLER U L US C Nienkämper recommends the use of Vox pre-wired systems as they offer the best value, quality and safety to the consumer. Standard Vox Forums are listed by Underwriters Laboratories Inc. under several categories. These listings qualify a level of safety guaranteed by UL s published standards for safety which UL uses as a benchmark for testing and listing products. The right to bear the UL mark is contingent on the fact that absolutely no alteration is made to the product as it was submitted and tested by Underwriters Laboratories. This is to ensure that assemblies are not manufactured with inferior or replacement parts; this would void or alter the result of the original examination and tests conducted by UL. The UL mark is included on a label that is attached to the underside of listed Vox products. This label includes: The date the component was assembled and tested. A serial number for tracking purposes. The listing category located under the UL mark. UL file number that can be used as a reference at UL for any inquiries about the product. SAMPLE UL/CSA LABEL All listed assemblies have POWER/ELECTRICAL components wired by Nienkämper and undergo the following tests: Production Line Grounding Test - Continuity: This test checks for grounding continuity between the grounding conductor of the attachment plug and the designated main grounding point including any accessible dead-metal parts of the assembly. There must be grounding continuity between all parts. Production-line Dielectric Voltage Withstand Test - Hi-pot: Each product shall withstand without electrical breakdown, as a routine productionline test, the application of an AC potential at a frequency within the range of Hz or a DC potential between the primary wiring, including connected components, and accessible dead metal parts that are likely to become energized. This test is conducted when the product is fully assembled, and cannot be unwired, modified or disassembled afterwards. Production-line - Polarity Test: This test verifies proper electrical polarity of both the grounded (neutral) and the ungrounded (hot) supply circuit conductors of the Forum and all parts intended to be connected to the grounded (neutral) and ungrounded (hot) supply circuit conductors of the attachment plug. Conductivity indications must confirm the correct connection of all parts specified. Nienkamper GSA 10/25/

26 SIN#: WORKSURFACES, WORKSTATIONS, COMPUTER, FURNITURE & ACCESSORIES VOX FORUM - PRE-WIRED DESIGN MARK MULLER CERTIFIED STANDARD FEATURES Voice - Voice jack with 6 positions and 6 loaded contacts will accommodate any telephone requirement. Data - Data jack complies with all category 5e or optional category 6 wiring requirements. The standard data jack wiring configuration is T568A. Power - Providing two AMP, 110 volt, grounded receptacles, wired to a single grounded power cord. All connections are pass through and ready to plug in. es - 5 anodized alluminum colours Vox Forum must be installed on Nienkamper products. S SERIES Forum W x H Description Product Description 5 1/4 x 5 1/4 A AMP CAT-5E data jacks with 2-10 supply cords 2 receptacles grounded power with 1-10 supply cord 1 overload protector AMP Faceplate 5 1/4 W x 3 H DATA DATA POWER POWER 5 1/4 x 5 1/4 B AMP CAT-5E RJ45 voice jack with 1-10 supply cord 1 data jack with 1-10 supply cord 2 receptacles grounded power with 1-10 supply cord 1 overload protector AMP Faceplate 5 1/4 W x 3 H DATA VOICE POWER POWER 5 1/4 x 5 1/4 C AMP CAT-5E RJ45 voice jack with 1-10 supply cord 2 data jacks with 2-10 supply cords 2 receptacles grounded power with 1-10 supply cord 1 overload protector AMP Faceplate 5 1/4 W x 3 H DATA VOICE DATA POWER POWER 5 1/4 x 5 1/4 H AMP CAT-5E 945 HD DB15 (female gender) - computer/video with 18 supply cord data jack - Local Area Network (LAN) with 10 supply cord 3.5mm audio jack for connecting laptop audio with 18 supply cord 2 power receptacles grounded with 1-10 supply cord overload protector 12.5 AMP Faceplate 5 1/4 W x 3 H 3.5mm POWER DATA POWER HDDB15 Nienkamper GSA 10/25/

27 SIN#: WORKSURFACES, WORKSTATIONS, COMPUTER, FURNITURE & ACCESSORIES VOX FORUM - PRE-WIRED DESIGN MARK MULLER CERTIFIED M SERIES Vox Forum Configurator Vox Forum M series #: M - 1P - 0E - 7V : $1,040 Plate 1 : 1P, pre-wired Power contains the following: single module faceplate with - 1 duplex power receptcle / 15A - 120V - pre-wired with 10 cord and plug. Includes 12.5 amp overload protector. Plate 2 : 0E, 2 - amp CAT5E Data, 10 cord Plate 3 : 7V, single module blank faceplate #: M - 1P - 0F - 1P : $1,455 Plate 1 : 1P, pre-wired Power contains the following: single module faceplate with - 1 duplex power receptcle / 15A - 120V - pre-wired with 10 cord and plug. Includes 12.5 amp overload protector. Plate 2 : 0F, 3 - amp CAT5E Data, 10 cord Plate 3 : 1P, pre-wired Power contains the following: single module faceplate with - 1 duplex power receptcle / 15A - 120V - pre-wired with 10 cord and plug. Includes 12.5 amp overload protector. #: M - 1P - 0E - CX : $1,430 Plate 1 : 1P, pre-wired Power contains the following: single module faceplate with - 1 duplex power receptcle / 15A - 120V - pre-wired with 10 cord and plug. Includes 12.5 amp overload protector. Plate 2 : 0E, 2 - amp CAT5E Data, 10 cord Plate 3 : custom A: G-HD-DB15-18 cord B: C-Audio 3.5mm - 18 cord D: HD-HDMI - 24 cord Nienkamper GSA 10/25/

28 SIN#: MULTI-PURPOSE SEATING SENATOR EXECUTIVE CHAIR DESIGN NIENKAMPER Seat Arm Fabric Leather Unika Vaev Fabrics H H W D H Yds. Sq. Ft. COM COL Neather Verde Grano Cremoso Low Back /2-211/ /4 32 1,915 2,010 2,055 2,770 2,995 3,090 2,035 2,140 2,170 2,205 Medium Back /2-211/ / ,005 2,100 2,165 2,970 3,225 3,325 2,145 2,255 2,300 2,330 High Back /2-211/ /4 38 2,400 2,515 2,575 3,415 3,685 3,790 2,550 2,680 2,735 2,755 Standard Features: Urethane arm Pneumatic height adjustment Back tilt locking mechanism Tension control Carpet casters Black five-star base Optional Features: Hard floor casters, add $100 list per chair Glides, add $100 list per chair Polished aluminum five-star base, add $200 list Chrome finish sled base, add $155 list # 1 Urethane Arm Upholstery Details: Leather upholstery has channel stitching finished with a welt detail. Fabric upholstery is available in plain or channel stitching finished with a French seam detail. Nienkamper GSA 10/25/

29 SIN#: MULTI-PURPOSE SEATING SENATOR BOARDROOM CHAIR DESIGN NIENKAMPER Seat Arm Fabric Leather Unika Vaev Fabrics H H W D H Yds. Sq. Ft. COM COL Neather Verde Grano Cremoso Low Back /2-211/ /4 22 1,400 1,465 1,495 1,985 2,140 2,205 1,485 1,555 1,580 1,600 Medium Back /2-211/ /2 11/4 30 1,415 1,485 1,510 2,215 2,430 2,510 1,495 1,565 1,590 1,610 High Back /2-211/ /2 36 1,445 1,515 1,565 2,280 2,500 2,580 1,555 1,635 1,665 1,690 Standard Features: Urethane arm Pneumatic height adjustment Back tilt locking mechanism Back tilt tension control Carpet casters Black five-star base Optional Features: Hard floor casters, add $100 list per chair Glides, add $100 list per chair Polished aluminum five-star base, add $200 list Nienkamper GSA 10/25/

30 SIN#: MULTI-PURPOSE SEATING NIENKAMPER NOW CHAIR DESIGN MARK MULLER Seat Arm Fabric Leather Unika Vaev Fabrics H H W D H Yds. Sq. Ft. COM COL Mesh Neather Verde Grano Cremoso Fully Upholstered /2-271/ /2-391/ /4 28 1,280 1,305 1,405 1,825 2,005 2,070 1,405 1,445 1,480 1,545 Polished Arm Supports, Polished Alum. Base, Chrome Casters Horizontal Mesh Back 13090H /2-271/2 271/2 371/2-401/2 24 3/4 10 1,360 1,370 1,295 1,410 1,555 1,620 1,645 1,415 1,430 1,445 1,475 Multifunctional Armrests, Polished Alum. Base, Chrome Casters The Nienkämper NOW Chair brings Nienkämper s renowned fine upholstery and contemporary aesthetics to the conference-room chair. Height, back and tilt controls, firm lumbar support and a contoured back ensure a comfortable, ergonomic sitting experience. stitching on the edges, a distinctive Y detail on the back and a tuck on the seat and back emphasize the chair s crisp, tailored elegance. Nienkamper NOW chair passes CAL 133 certified for an upcharge of $290 list per chair. Certification applies to Nienkämper leathers and fabrics that have a minimum of 50% natural fibre content. COM s and COL s are subject to approval. Add the extension -CAL to the model number when ordering. Standard Features: Locking tilt with return safety function Pneumatic height adjustment Synchronized seat-and-back recline Tilt tension control -stitch detail on seat and back covers Large 75mm, un-hooded, hard wheel casters (for soft flooring) Chrome (zinc) or black (plastic) glides 26 diameter five-star base Suffix A B D CAL E F G H Optional Features: Armless (remove painted arm supports) (deduct $150 list) Verde/Terraverde, Grano/Carrillo or Cremoso/Tierno leather upholstered arm pads (for painted or polished arm supports) (add $160 list) - plus additional 3 sq.ft. of COL (remove painted arm supports) (add $490 list) - plus additional 11 sq.ft. of COL Contrast stitching (leather covers only) (no upcharge) CAL 133 Certified applies to leather & fabric that has a minimum (add $290 list) 50% natural fibre content. COM & COL subject to approval. Caster Chair Options: Soft wheel caster (for hard floors) Black (add $75 list) Soft wheel caster (for hard floors) Chrome (add $55 list) Hard wheel Electrical Static Discharge (ESD) caster Chrome (add $100 list) (for soft flooring) Fixed-height cylinder (no height adjustment, with swivel) (no upcharge) Nienkamper GSA 10/25/

31 SIN#: MULTI-PURPOSE SEATING OMADA CHAIR DESIGN FIGFORTY OMADA CHAIR - MESH SEAT & BACK Seat Arm H H W D H Omada with Adjustable Arms / / / Omada with Cantilever Arms / / / /2 880 OMADA CHAIR WITH UPHOLSTERED BACK PAD Seat Arm Fabric Leather Unika Vaev Fabrics H H W D H Yds. Sq. Ft. COM COL Neather Verde Grano Cremoso Omada with Adjustable Arms / / / /2 27 1,150 1,185 1,240 1,565 1,645 1,695 1,245 1,285 1,310 1,360 Omada with Cantilever Arms / / / /2 11/2 27 1,080 1,115 1,170 1,495 1,575 1,625 1,175 1,215 1,240 1,290 Standard Features: Mesh back available in 29 mesh colours Fully adjustable arms black polyurethane as standard, but can be upholstered Seat has optional slide feature and can be upholstered in fabric or leather, as well as a coordinating mesh Frame has a soft-touch cap on top Cushions are molded foam with 25% soy foam content Base is black as standard; add $65.00 list for polished aluminum with chrome casters # Nienkamper GSA 10/25/

32 SIN#: MULTI-PURPOSE SEATING NABU CHAIR DESIGN BANGDESIGN NABU CHAIR - STRIPED MESH BACK & MESH SEAT Seat Arm H H W D H Nabu with Cantilever Arms / / /2 251/ /2 825 Nabu with Adjustable Arms / / /2 251/ /2 845 NABU CHAIR - FULLY UPHOLSTERED BACK Seat Arm Fabric Leather Unika Vaev Fabrics H H W D H Yds. Sq. Ft. COM COL Neather Verde Grano Cremoso Nabu with Cantilever Arms / / /2 251/ /2 11/ ,030 1,040 1,135 1,170 1,205 1,045 1,060 1,075 1,095 Nabu with Adjustable Arms / / /2 251/ /2 11/2 24 1,020 1,050 1,060 1,155 1,190 1,220 1,070 1,085 1,095 1,115 NABU CHAIR - FULLY UPHOLSTERED MESH BACK & MESH SEAT Seat Arm H H W D H Nabu with Cantilever Arms / / /2 251/ /2 850 Nabu with Adjustable Arms / / /2 251/ /2 875 # Standard Features: Seat available in 29 solid mesh colors. Back available in 34 contrasting mesh stripe. Back mesh has a horizontal stripe pattern as standard created by the strong elastomer fiber woven in the mesh. Cushions are molded foam with 25% soy foam content Spring loaded pivot action provides a rocking motion 6 degree back and 3 degrees forward. Knee tilt action with tension control and 4 position back lock available for an upcharge of $80 list Swivel base is black as standard; add $65.00 list for polished aluminum with chrome casters Nienkamper GSA 10/25/

33 SIN#: MULTI-PURPOSE SEATING KLINT CHAIR DESIGN NIENKAMPER Seat Arm Fabric Leather COM Unika Vaev Fabrics H H W D H Yds. Sq. Ft. of Klint Fabric COL Verde Grano Cremoso Klint with Adjustable Amrs /2-421/2 13/4 28 1,280 1,305 1,405 2,005 2,070 1,405 1,445 1,480 1,545 Klint with Fixed Amrs /2-271/2 271/2 371/2-401/2 24 3/4 10 1,360 1,370 1,410 1,620 1,645 1,415 1,430 1,445 1,475 Standard Features Back upholstered in double layer mesh. Five Klint mesh colors available: Black Kl01 White Kl02 Light Grey Kl03 Dark Grey Kl04 Red Kl05 Seat upholstered in Klint fabric or COM. Eight Klint fabric colors available: Jute Kl101 Ochre Kl201 Venetian Kl302 Gulf Kl401 Fennel Kl503 Myriad Kl801 Titanium Kl802 Storm Kl902 Seat slides forward 2" and has five stop positions Available back stop with four stop positions Pneumatic height adjustment Back tension adjustment Adjustable arms have the following: 4" height adjustment Each arm has 1 1/2" width adjustment Arm cap has 2" front to back adjustment Arm cap has 2 inward and 2 outward position Black base is standard. Add $65 list for aluminum base. # Nienkamper GSA 10/25/

34 SIN#: MULTI-PURPOSE SEATING BLOB DESIGN KARIM RASHID Seat Arm Fabric Leather Unika Vaev Fabrics H H W D H Yds. Sq. Ft. COM COL Verde Grano Cremoso /2 29 2/4 50 1,480 1,550 2,545 2,825 2,945 1,670 1,825 1,885 1,920 Fully upholstered /2 29 1,480 1,670 1,825 1,885 1,920 Contrasting fabric sides 11/2 seat/back 11/ /2 29 1,550 2,545 2,825 2,945 Contrasting leather sides 27 seat/back 27 The curvaceous shape and soft molded foam of the Blob is conducive to fabrics with some stretch and minimum pattern. When upholstered in two different fabrics or leathers, use the COM price and ship your fabric yardage or leather square footage to Nienkämper. See page 8 for COM and COL details. Seams can have matching or contrasting stitching. Matching or contrasting welting detail can also be specified. *For patterned or directional fabrics please contact Customer Service at for yardages. Fabric to be upholstered on Blob requires approval from Nienkamper s factory. Please contact customer service at for our fabric approval list. #14904 Contrasting fabric #14904 Contrasting fabric Nienkamper GSA 10/25/

35 SIN#: MULTI-PURPOSE SEATING CHARLISLE DESIGN GEORGE YABU & GLENN PUSHELBURG Seat Arm Fabric Leather Unika Vaev Fabrics H H W D H Yds. Sq. Ft. COM COL Neather Verde Grano Cremoso Chair with Swivel Disk / /2 41/2 75 2,435 2,565 2,795 4,445 4,975 5,185 2,755 3,015 3,105 3,165 Chair with Legs / / ,435 2,565 2,755 4,305 4,805 5,000 2,715 2,945 3,025 3,085 2 Seat Sofa / / / ,235 4,445 4,805 7,025 7,760 8,055 4,735 5,130 5,280 5,370 3 Seat Sofa / / / ,270 6,585 7,070 9,915 10,870 11,255 6,980 7,540 7,750 7,885 Carlisle series passes CAL 133 certified for an upcharge of $415 list per chair, $825 list per two seater sofa, $1240 list per three seat sofa, and $360 list per ottoman. Certification applies to Nienkämper leathers and fabrics that have a minimum of 50% natural fibre content. COM s and COL s are subject to approval. Add the extension -CAL to the model number when ordering. Legs and swivel disk base are upholstered to match the frame. #16200 Fully upholstered When upholstered in leather, the two seat sofa (model 16220) has a center seam. When upholstered in fabric, the two seat sofa (model 16220) does not have a center seam. Nienkamper GSA 10/25/

36 SIN#: MULTI-PURPOSE SEATING KLOUD DESIGN KARIM RASHID Seat Arm Fabric Leather Unika Vaev Fabrics H H W D H Yds. Sq. Ft. COM COL Neather Verde Grano Cremoso Chair / /2 301/2 41/2 81 2,435 2,565 2,795 4,445 4,975 5,185 2,755 3,015 3,105 3,165 2 Seat Sofa / /2 301/ ,435 2,565 2,755 4,305 4,805 5,000 2,715 2,945 3,025 3,085 3 Seat Sofa / /2 301/2 71/ ,235 4,445 4,805 7,025 7,760 8,055 4,735 5,130 5,280 5,370 Laminated wood base frame with rubber webbing under the fixed cushion. The foam body is supported with a tubular steel frame inside. The seat and back are polyurethane foam covered in Fortrel. Upholstered in leather or fabric. Kloud Collection passes CAL 133 certified for an upcharge of $415 list per chair, $825 list per 2 seat sofa and $1,240 list per 3 seat sofa. Certification applies to Nienkämper leathers and fabrics that have a minimum of 50% natural fibre content. COM s and COL s are subject to approval. Add the extension -CAL to the model number when ordering. The swivel base is painted silver. The curvaceous shape and soft molded foam of the Kloud chair are conducive to fabrics with some stretch and minimum pattern. Fabrics should be approved by customer service. ( ) Nienkamper GSA 10/25/

37 SIN#: MULTI-PURPOSE SEATING MAX DESIGN MARK MULLER Seat Arm Fabric Leather Unika Vaev Fabrics H H W D H Yds. Sq. Ft. COM COL Neather Verde Grano Cremoso Lounge Chair /2 241/2 331/ /2 42 2,605 2,735 2,810 3,735 4,030 4,140 2,775 2,915 2,970 3,010 Open wood arm # Nienkamper GSA 10/25/

38 SIN#: MULTI-PURPOSE SEATING SATORI TM & SATORI TM WIHT TABLET ARM DESIGN MARK SAFFELL & DAVID RITCH Seat Arm Fabric Leather Unika Vaev Fabrics H H W D H Yds. Sq. Ft. COM COL Neather Verde Grano Cremoso Satori /2 281/2 261/ /2 52 2,175 2,285 2,460 3,575 3,945 4,090 2,425 2,620 2,695 2,750 Satori with Tablet Arm /2 243/4 303/4 241/4 301/2 31/2 50 3,280 3,450 3,565 4,685 5,055 5,200 3,530 3,725 3,800 3,855 mesh pocket Satori and Satori with Tablet Arm are available as CAL 133 certified for an upcharge of $415 list per chair. Certification applies to Nienkämper leathers and fabrics that have a minimum of 50% natural fibre content. COM s and COL s are subject to approval. Add the extension -CAL to the model number when ordering. Satori with Tablet Arm Mesh pocket dimensions are 21 w x 11 h. The tablet arm is made of marine-grade plastic. Legs are cast aluminum. Specify polished or brushed aluminum frame # Satori # A mesh pocket for storage and interchangeable cup holder. # Satori with interchangeable tablet arm accommodates right and left-handed users. Castors on the Satori chair make it easy to reconfigure meeting space. Nienkamper GSA 10/25/

39 SIN#: MULTI-PURPOSE SEATING SIX DESIGN NIENKAMPER Seat Arm Fabric Leather Unika Vaev Fabrics H H W D H Yds. Sq. Ft. COM COL Neather Verde Grano Cremoso Lounge Chair / ,255 2,355 2,395 3,060 3,270 3,350 2,405 2,495 2,530 2,505 Six Collection passes CAL 133 certified for an upcharge of $415 list per chair, $605 per 2 seat bench, $790 per 3 seat chair and $360 per ottoman. Certification applies to Nienkämper leathers and fabrics that have a minimum of 50% natural fibre content. COM s and COL s are subject to approval. Add the extension -CAL to the model number when ordering. Nienkamper GSA 10/25/

40 SIN#: MULTI-PURPOSE SEATING TUXEDO CLASSIC DESIGN ROBERT HAUSSMANN Seat Arm Fabric Leather Unika Vaev Fabrics H H W D H Yds. Sq. Ft. COM COL Neather Verde Grano Cremoso HIGH ARM Lounge Chair on Legs /2 301/ /2 72 2,775 2,915 3,140 4,710 5,220 5,420 3,095 3,350 3,450 3,515 2 Seat Sofa / ,030 4,230 4,505 6,655 7,275 7,490 4,445 4,790 4,920 5,000 3 Seat Sofa /2 301/ / ,280 5,540 5,880 8,490 9,335 9,675 5,805 6,230 6,390 6,490 LOW ARM Lounge Chair on Legs /4 301/2 301/ /2 72 2,775 2,915 3,140 4,710 5,220 5,420 3,095 3,350 3,450 3,515 2 Seat Sofa / / ,030 4,230 4,505 6,655 7,275 7,490 4,445 4,790 4,920 5,000 3 Seat Sofa /4 791/2 301/ / ,280 5,540 5,880 8,490 9,335 9,675 5,805 6,230 6,390 6,490 Tuxedo Classic is offered without a welting detail. Seat and back cushions have a foam core with Dacron wrap. Back cushions are attached to the frame. Seat cushions are loose. Square tubular legs made of cast aluminum are available in a brushed finish. A polished finish is available for an upcharge of $130 per chair or sofa. The swivel disk base is upholstered to match the frame. Tuxedo Classic with legs passes CAL 133 certified for an upcharge of $415 list per chair, $825 list per two seat sofa, $1240 list per three seat sofa, $1650 list per four seat sofa, and $360 list per ottoman. Certification applies to Nienkämper leathers and fabrics that have a minimum of 50% natural fibre content. COM s and COL s are subject to approval. Add the extension -CAL to the model number when ordering. #12421 Lounge chair fully upholstered in leather #12431 Lounge chair fully upholstered in leather Nienkamper GSA 10/25/