P-FH & P-FHS SELF CLINCHING STUD

Transcription

1 P-FH & P-FH LF The P-FH / P-FH LF is a threaded fastener which incorporates a knurled platform under the head, which when embedded in the sheet, displaces material into the cl ring ADVANTAG AY TO AMBL WITH ANY QUZ PR HIGH TORQU RITAN NO DAMAG TO DORATIV FINIH ON PANL VIUAL PROOF OF URITY ALWAY PRPNDIULAR TO PANL HAD INTALL FLUH WITH URFA OF HT DIGN GUID HOL PRPARATION It is recoended that the holes are formed using a punch operation, although drilled holes may be used. Holes should not be countersunk or de-burred. HOL IZ Holes must be held to a tolerance of ( ) MINIMUM HT THIKN ee product data sheets and method of assembly. MAXIMUM HT HARDN Rb80 for tuds (P-FH) Rb70 for tainless tuds (P-FH) INTALLATION excessive pressures. forces vary with sheet hardness and thickness. ee PRFORMAN DATA for recoended forces. TOOLING NOT: bottom anvil with a clearance hole to accept the threaded section of the stud. Where the sheet material is thin, a special thin sheet bottom anvil is required which includes a countersink at the top to create space for cl ring and displaced sheet material. ee MTHOD OF AMBLY page for details 2-20

2 P-FH & P-FH LF THNIAL DATA L MATRIAL OD P-FH - Hardened Zinc Plated P-FH - tainless TANDARD PLATING FINIH Zinc & lear Trivalent Passivation (Z) P-FH & P-FH TYP (MTRI) GNRAL DIMNION IZ / OD Hole ize in Hole in Mating omponent +/- 0.4 All dimensions in imum distance centre line hole to sheet edge M M M M M M M & LNGTH DATA IZ / OD Type tainless Length ode "L" +/-.04 (Length ode in millimeters) M2.5 P-FH P-FH N/A N/A N/A N/A M3 P-FH P-FH N/A N/A M3.5 P-FH P-FH N/A M4 P-FH P-FH M5 P-FH P-FH N/A M6 P-FH P-FH N/A N/A M8 P-FH P-FH N/A N/A N/A HOW TO PIFY P-FH ( tandard izes) Product ode P-FH-M4-10-Z ode P-FH-M4-10-Z Length ode P-FH-M4-10-Z Plating ode P-FH-M4-10-Z P-FH (tainless tandard izes) Product ode P-FH-M4-10 ode P-FH-M4-10 Length ode P-FH-M

3 P-FH & P-FH LF THNIAL DATA P-FH & P-FH TYP (UNIFID) L MATRIAL OD P-FH - Hardened Zinc Plated P-FH - tainless TANDARD PLATING FINIH Zinc & lear Trivalent Passivation (Z) GNRAL DIMNION IZ / OD & LNGTH DATA Hole ize in Hole in Mating omponent All dimensions in es +/ imum distance centre line hole to sheet edge / / / IZ / OD Type tainless 1/4.250 Length ode "L" +/-.015 (Length ode in 16ths of an ) 5/ / / / / / / P-FH P-FH N/A N/A N/A N/A 440 P-FH P-FH N/A N/A 632 P-FH P-FH P-FH P-FH / 024 P-FH P-FH N/A / 0428 P-FH P-FH N/A N/A / 0524 P-FH P-FH N/A N/A N/A HOW TO PIFY 1.1/ P-FH ( tandard izes) Product ode P-FH Z ode P-FH Z Length ode P-FH Z Plating ode P-FH Z P-FH (tainless tandard izes) Product ode P-FH ode P-FH Length ode P-FH

4 P-FH & P-FH LF P-FH / P-FH LF are easy to install because no special tooling is necessary. However, it is very important to note that they must always be installed by a squeeze action press rather than a haer blow. Punched holes are recoended MTHOD OF AMBLY Punch a hole in the metal sheet to the size recoended in our technical data table. Deburring of the hole is not recoended. Insert the stud through the hole in sheet and into the appropriate anvil as detailed below. Apply squeezing pressure sufficient to install the AMBLY DTAIL Anvil ize Metric A ize A Anvil Thin Anvil Use M2.5 - M5 for sheet M6 for sheet M8 for sheet for sheet.040" -.060" 0420 for sheet.062" -.092" 0518 for sheet.078" -.092" 2-23

5 P-FH & P-FH LF PRFORMAN DATA (MTRI) Test Material ode tud Type Nut Tightening Torque (kn) old Rolled (N) (kn) Aluminum (N) M2.5 M3 M3.5 M4 M5 M6 M8 tainless tainless tainless tainless tainless tainless tainless PRFORMAN DATA (UNIFID) ode tud Type tainless tainless tainless tainless tainless tainless tainless Nut Tightening Torque (in/lbs) old Rolled Test Material (in/lbs) Aluminum (in/lbs) Note: The above values are averages when correct installation is performed. Variations in holes consultation with your PM Technology entre. 2-24

6 P-HFH / P-HFH LF P-HFH / P-HFH LF have been designed to achieve higher levels of performance than the P-FH range of fasteners for applications that do not demand a flush finish condition. ADVANTAG AY TO AMBL WITH ANY QUZ PR HIGH TORQU RITAN VIUAL PROOF OF URITY ALWAY PRPNDIULAR TO PANL DIGN GUID HOL PRPARATION It is recoended that the holes are formed using a punch operation, although drilled holes may be used. HOL IZ Holes must be held to a tolerance of (-.000" +.005") MAD FROM THROUGH-HARDND TL FOR HIGH TRNGTH MINIMUM HT THIKN ee product data sheets and method of assembly. MAXIMUM HT HARDN Rb80 for tuds (P-HFH) Rb70 for tainless tuds (P-HFH) INTALLATION Using a squeeze action, apply sufficient force to fully embed the teeth into the host sheet metal, bringing the head in contact with the sheet. ee PRFORMAN DATA for recoended forces. The head of the stud is not designed to be TOOLING NOT: tuds are installed using a recessed top punch anvil with a clearance hole to accept the threaded section of the stud. Where the sheet material is thin, a special thin sheet bottom anvil is required which includes a countersink at the top to create space for the cl ring and displaced sheet material. ee MTHOD OF AMBLY page for details 2-25

7 P-HFH / P-HFH LF THNIAL DATA T L MATRIAL OD P-HFH - Hardened Zinc Plated P-HFH - tainless TANDARD PLATING FINIH Zinc & lear Trivalent Passivation (Z) MTRI GNRAL DIMNION IZ / OD Rec Hole ize Hole in Mating omponent +/ Height T All dimensions in millimeters Unthreaded Length imum distance centre line hole to sheet edge M M M M & LNGTH IZ / OD Type tainless Length ode "L" +/- 0.4 (Length ode in millimeters) M5 P-HFH P-HFH M6 P-HFH P-HFH M8 P-HFH P-HFH M10 P-HFH P-HFH HOW TO PIFY P-HFH ( tandard izes) Product ode ode Length ode Plating ode P-HFH-M6-20-Z P-HFH-M6-20-Z P-HFH-M6-20-Z P-HFH-M6-20-Z P-HFH (tanless tandard izes) Product ode ode Length ode P - H F H - M P - H F H - M P - H F H - M

8 P-HFH / P-HFH LF THNIAL DATA UNIFID T L MATRIAL OD P-HFH - Hardened Zinc Plated P-HFH - tainless TANDARD PLATING FINIH Zinc & lear Trivalent Passivation (Z) GNRAL DIMNION All dimensions in es IZ / OD Rec Hole ize Hole in Mating omponent +/ Height T Unthreaded Length imum distance centre line hole to sheet edge 032 / / / / & LNGTH DATA Type Length ode "L" +/-.015 (Length ode in 16ths of an ) IZ / OD tainless 1/ / / / / / 024 P-HFH P-HFH / 0428 P-HFH P-HFH / 0524 P-HFH P-HFH / 0624 P-HFH P-HFH N/A HOW TO PIFY P-HFH ( tandard izes) Product ode ode Length ode Plating ode P-HFH Z P-HFH Z P-HFH Z P-HFH Z P-HFH (tainless tandard izes) Product ode ode Length ode P - H F H P - H F H P - H F H

9 P-HFH / P-HFH LF PRFORMAN DATA (MTRI) ode M5 M6 M8 M10 tud Type Nut Tightening Torque (kn) old Rolled (N) Test Material tainless 7 (kn) Aluminum (N) tainless tainless tainless PRFORMAN DATA (UNIFID) ode tud Type Nut Tightening Torque (ft/lbs) old Rolled Test Material (ft/lbs) Aluminum (ft/lbs) 10 1/4 5/16 3/ tainless tainless tainless tainless 24 Note: The above values are averages when correct installation is performed. Variations strongly recoend consultation with your PM Technology entre. 2-28

10 P-HFH / P-HFH LF P-HFH / P-HFH LF are easy to install because only simple tooling is required. However, it is very important to note that they must always be installed by a squeeze action press rather than a haer blow. Punched holes are recoended. MTHOD OF AMBLY Punch a hole in the metal sheet to the size recoended in our technical data table. De-burring of the hole is not recoended. Insert the stud through the hole in sheet and into the appropriate anvil as detailed below. teeth, bringing the head into contact with the sheet. MTHOD OF AMBLY HT L+3.00 /.118 PUNH tandard Anvil ize Metric Recess Width D Punch Recess Depth F Die Length Bore Anvil /sink Dia A Thin M L M L M L M L L+3.00 /.118 D A Thin Anvil F ize Recess Width D Punch Recess Depth F Die Length Bore Anvil /sink Dia A Thin L / L / L / L