One Arm Articulating TV Wall Mount

Size: px

Start display at page:

Download "One Arm Articulating TV Wall Mount"

Kerry Phillips
6 years ago
Views:

One Arm Articulating TV Wall Mount Item No: 63607068/63607107/63607139 MIN:3.07 in / 78 mm MAX:21.65 in / 550 mm MIN: 2.95 x 2.95 in / 75 x 75 mm MAX:3.9 x 3.

1 One Arm Articulating TV Wall Mount Item No: / / MIN:3.07 in / 78 mm MAX:21.65 in / 550 mm MIN: 2.95 x 2.95 in / 75 x 75 mm MAX:3.9 x 3.9 in / 100 x 100 mm Congratulations on your latest Atlantic purchase. Follow these simple instructions and you ll have your TV mounted in no time. This kit fits most TVs 37in - 8in. (9cm cm), up to 132lbs (60kgs). Keep this Instruction Manual for future reference. Keep your original proof of purchase (store receipt). If you have any questions and/or wish to order parts, please call us toll free at , or customer_relations@atlantic-inc.com

3 Parts List Item Components Qty Item Components Qty A 1 F B 1 G 8 C 2 H x 8.66in. (220mm) Velcro Cable Ties Tools Needed (Not Included) 5/16 in. or 8 mm Safety Hammer Wood rill Bit Phillips rill Stud Finder Glasses Screwdriver Note: before assembly. Wood ouble Stud 16 in/06 mm or 2 in/610 mm 2

4 PLEASE CHOOSE BEST INSTALLATION OPTION BASE ON TV BACK PANEL HOLE SPACING: OPTION 1: 2.95 in x 2.95 in / 75 mm x 75 mm or 3.9 in x 3.9 in / 100 mm x 100 mm /06mm or 2 /610mm F A B A Remove TV mounting plate (B) from wall bracket (A). This mount is designed to be attached into wood studs. O NOT use wall anchors. Using a stud pencil, mark the hole locations at the desired height, making sure you are level. Use wall bracket (A) as a template to mark the two remaining holes. rill pilot holes at pencil marks 2.5 in. (6mm) deep, using a 5/16 in. or 8 mm diameter drill bit. Attach wall bracket (A) to the wall with screws (F). 3 B Safety Screws Attach TV mounting plate (B) to the back of the TV, by selecting mounting hardware and then using instructions on page 6. We strongly recommend two people, one on each side, hold the TV. Carefully position the TV over the wall bracket (A) until it locks in place. Tighten safety screws. 3

5 H PLEASE CHOOSE BEST INSTALLATION OPTION BASE ON TV BACK PANEL HOLE SPACING: OPTION 2: (7.87 to 23.6) in x 15.7 in / (200 to 600) mm x 00 mm 1 16 /06mm or 2 /610mm A F This mount is designed to be attached into wood studs. O NOT use wall anchors. Using a stud finder, find the center of two adjacent studs. With a pecil, mark the hole locations at the desired height, making sure you are level. Use wall bracket (A) as a template to mark the two remaining holes. rill pilot holes at pencil marks 2.5 in. (6mm) deep, using a 5/16in. or 8 mm diameter drill bit. Attach wall bracket (A) to the wall with screws (F). 2 B G B Attach horizontal bar () to TV mounting plate (B), then fix it with screws (G) and allen wrench (H).

Selecting mounting hardware and then using instructions on Page 6 Safety Screws We

6 H 3 C C Figure 1 G C UP Slide TV mounts (C) along with TV horizontal bar (). See Figure 1. allen wrench (H). Selecting mounting hardware and then using instructions on Page 6 Safety Screws We strongly recommend two people, one on each side, hold the TV. Carefully position the TV over the wall bracket (A) until it locks in place. Tighten safety screws. 5

7 OPTION 1 OPTION in x 2.95 in / 75 mm x 75 mm 3.9 in x 3.9 in / 100 mm x 100 mm (7.87 to 23.6) in x 15.7 in (200 to 600) mm x 00 mm UP TAKE EXTRA CARE AN PAY ATTENTION WHEN YOU FASTEN THE TV MOUNT(S) TO THE BACK TV PANEL IN STEP 3. MAKE SURE TO USE THE APPROPRIATE MOUNTING HARWARE FOR YOUR TV. 1. Select the correct Mounting Hardware according to the screw hole size on your TV. iscard any remaining screws and spacers. 2. Carefully lay your TV face down on a non-abrasive surface, laying padding underneath it to protect the screen. 3. OPTION 1: Place the TV plate (B) in the appropriate position, making sure it is CENTERE on the back of TV and LEVEL. OPTION 2: Place the right and left TV mounts in their appropriate positions, making sure they are CENTERE on the back of the TV and LEVEL with one another. Mounting Hardware List Q ty Mounting Hardware List Q ty I M8 X 16 Q M / M 5 washer J M6 X 12 R M6 / M 8 washer K M5 X 12 S M8 / M6 spacer L M X 12 T M / M5 spacer M M8 X 0 N M6 X 35 O M5 X 30 P M X 30 6

8 Product Warranty: Atlantic Inc., warrants to the original purchaser that its products are free from defect in materials and workmanship. If after inspection, we find that the product was defective in materials or workmanship we shall repair or replace the product at our discretion. This warranty does not cover accidental damage, misuse, improper care or alteration and excludes claims for incidental or consequential loss. This limited warranty applies to product purchased in the U.S. and Canada. This warranty gives you specific legal rights and you may also have other rights which vary from State to Stage. This warranty duration will last one year from the date of purchase U.S. and other foreign patents pending / Patentes de los EU A y países extranjeros en trámite / Brevets en cours pour les États-Unis et autres pays / U.S. und andere ausländische Patente sind hängig All rights reserved / erechos Reservados / Tous droits réservés Made in China / Hecho en China / Fabriqué en Chine R # / /

Item #: Versa 18 Wall Unit

Item #: Versa 18 Wall Unit For factory use only Option 1 Option Option 3 Item #: 38435833 Versa 18 Wall Unit Congratulations on your latest Atlantic purchase. Follow these instructions, and you ll have this new product assembled