Item #: Versa 18 Wall Unit

Transcription

1 For factory use only Option 1 Option Option 3 Item #: Versa 18 Wall Unit Congratulations on your latest Atlantic purchase. Follow these instructions, and you ll have this new product assembled in no time. If you need any help or to order replacement / missing parts, please call or customer_relations@atlantic-inc.com.

2 1

3 16 N 1 A F 16 P 51 Q 1 4 R S T 6 H U 1 C 4 V 16 W 1 J 40 Philips screwdriver needed (not included) 1 K 8 L 8 M

4 1 F ulid sets Insert shelf(f) into vertical panels(). M L F ulid sets Insert wood dowels() cam screws(m) into side panels(&), insert cam locks(l) into shelf(f). Attach side panels(&) to shelf(f), then turn cam locks(l) clockwise to tighten. 3 Top Section W Insert wood dowels () into side panel(&) and vertical panels(). Attach middle shelf () to side panels(&) and vertical panels(), then fasten them with screws (W). 3

5 4 Top Section P Figure 1 A N Insert cam screws(p) and wood dowels() into top panel(a), insert cam locks(n) into panels (,&),Attach top panel(a) to panels(,&), then turn cam locks(n) clockwise to tighten. See Figure ottom Section Figure C C W Insert wood dowels () into panels (,&). Attach bottom panel(c) to panels(,&) and fasten them with screws (W). See Figure. 6 Top Section Figure 1 A P N C ottom Section Figure Insert cam screws(p) and wood dowels() into middle shelf(). Insert cam locks(n) into panels (,&), Attach bottom section to top section, turn cam locks (N) clockwise to tighten. 4

6 7 Q 8 J H V K Turn the unit upright. Fasten back panels (J&K) to shelves and panels with screws (Q). Insert the pins(v) into panels,then put the adjustable shelves(h)onto the pins. We have three options for you(see below figures). Option 1 Option Option 3 Product Warranty Atlantic Inc. warrants to the original purchaser that its products are free from defects in materials or workmanship. If after inspection, we find that the product was defective in materials or workmanship, we shall repair or replace the product at our discretion. This warranty does not cover accidental damage, misuse, improper care or alteration and excludes claims for incidental or consequential loss. This limited warranty applies to product purchased in the U.S. and Canada. This warranty gives you specific legal rights and you may also have other rights which vary from State to State. The warranty duration is one year. Keep this Instruction Manual for future reference. Keep your original proof of purchase (store receipt). If parts are missing, O NOT return to the store. To order missing / replacement parts or for assembly assistance, please contact customer_relations@atlantic-inc.com. Or call M-Th, 8am-5pm; Fri, 8am-1pm P.S.T. 5

7 Safety Wall Mount for Wood Items WALL Part list (S) Plastic wall anchor T (R) Metal mounting bracket S (T) Wood screw U R (U) ry-wall screw UNIT Tools needed/not included * Phillips screwdriver * Pencil * Power drill Mounting Instructions Follw the instruction for the top of the unit ( sets) 1. Place mounting bracket(r) at the desired postion on your wall according to the height of your unit. Mark the hole postion on the wall with a pencil.. rill a hole on the pencil mark on the wall. Insert the plastic anchor(s) into the wall. 3. Place the mounting bracket(r) and screw(t) into pre-drill hole on the top of the unit. Move the unit closer to the wall. Adjust the sliding bracket(r) if needed. Screw the dry-wall screw(u) into the wall anchor(s). Note: For safe mounting, it is essential to use the proper hardware for your wall type(wood, concrete, etc.). Contact your local hardware store for assistance if necessary. 01 U.S. and other foreign patents pending / Patentes de los UA y países extranjeros en trámite / revets en cours pour les États-Unis et autres pays / U.S. und andere ausländische Patente sind hängig All rights reserved / erechos Reservados / Tous droits réservés Made in China / Hecho en China / Fabriqué en Chine R #