SolidPix Fixed-Frame Screen Integrated Type I Installation Manual. Revision A

Size: px

Start display at page:

Download "SolidPix Fixed-Frame Screen Integrated Type I Installation Manual. Revision A"

Stanley Gabriel Rose
6 years ago
Views:

1 SolidPix Fixed-Frame Screen Integrated Type I Installation Manual

3 Action: W: Written R: Page revised A: Page added D: Page deleted C: Rewritten completely Date Rev. N Action Rev. Pages New Pages A W - New document Reason For Revision 3

5 Table of Contents Package Contents 7 Frame Assembly 11 Projection Screen Material Installation 13 Mounting Dimensions 15 Screen Care 17 5

Package Contents The SolidPix Integrated I Fixed Frame screen is shipped as a kit for on-site

The kit contains the frame, the projection screen fabric, and the tools and accessories necessary

on screen size) Flat Corner Brackets (8 pieces) 3,5 x 25 screws (16 pieces + 2 spare) Wall mounting

larger than 126 are delivered with 6 wall mounting brackets.

7 Package Contents The SolidPix Integrated I Fixed Frame screen is shipped as a kit for on-site assembly. The kit contains the frame, the projection screen fabric, and the tools and accessories necessary for assembly. All Fixed-Frame screens include: Aluminum frame extrusions (2 long and 2 short) Frames larger than 126 are delivered in 8 pieces. SolidPix projection Screen Material (1 piece) Pi-Grip clipping extrusion 1m (39 ) (quantity depends on screen size) Flat Corner Brackets (8 pieces) 3,5 x 25 screws (16 pieces + 2 spare) Wall mounting brackets (4 pieces) M6x10 rounded screws (8pieces + 1 spare) Ø 6 Rings (8pièces + 1 spare) Frames larger than 126 are delivered with 6 wall mounting brackets. M6 Square nuts (8 pieces) In addition, screens larger than 100 wide include: Frame stiffeners (2 pieces) with M6 x 10 bolts and M6 square nuts (4 pieces) Frames larger than 126 are delivered with 4 stiffeners. Equipement required (not included) : - 1 drilling machine - 1 drill (diam.0,08 /2mm) 7

9 Package Contents Screens larger than 126 wide are shipped in sections, and also include: Flat frame extensions and set screws (8 pieces) 4mm Allen wrench (1 piece) All screens include the following tools for assembly: 6mm Allen wrench (1 piece) Gloves (1 pair) Mallet (1 piece) Short Pi-Grip clipping extrusions (12 pieces) Fabric cutting tool (1 piece) Instruction manual Protective plastic tarp (1 piece) 9

Frame Assembly 1. Prepare your workspace. You will need an area the size of the finished screen plus approx 18 / 50cm on all sides to walk around the screen.

If your frame has been delivered in multiple pieces (generally because it is more than 126 wide), assemble the three pieces as shown and tighten the set screws on the back. 3.

11 Frame Assembly 1. Prepare your workspace. You will need an area the size of the finished screen plus approx 18 / 50cm on all sides to walk around the screen. A soft surface, such as carpet, is best if possible. Roll out the tarp that is provided with the screen to protect the frame and fabric from foreign matter. 2. If your frame has been delivered in multiple pieces (generally because it is more than 126 wide), assemble the three pieces as shown and tighten the set screws on the back. 3. Insert the square nuts into one of the grooves in the frame. To know the number of square nuts you need to insert, refer to the following table or to the optional supports installation guides to know how many nuts you need to put and in which frame section (top or sides), depending on the frame section you want to use to attach your screen. Insert them now as there is no way to add them once the frame is fully assembled Frame Stiffeners 2 in the top bar and 2 in the bottom bar 4 in the top bar and 4 in the bottom bar TMount Legs Standard mounting brackets SCMB RWMB1 RWMB2 4 in the top bar and 4 in the bottom bar 2 per bracket in the desired frame section 4 in the left bar and 4 in the right bar 4 in the left bar and 4 in the right bar 2 in the left bar and 2 in the right bar 8 in the top bar and 4 in the bottom bar 2 per bracket in the desired frame section 4 in the left bar, 4 in the right bar and 2 in the top bar 4 in the left bar, 4 in the right bar and 2 in the top bar 2 in the left bar, 2 in the right bar and 2 in each stiffener 2 per bracket in the desired frame section 4 in the left bar, 4 in the right bar and 4 in the top bar 4 in the left bar, 4 in the right bar and 4 in the top bar 11

Frame Assembly You can install your integrated fixed screen as you want using the different dedicated grooves projection screen fabric / corner bracket 4.

Press the corner tightly together and pre-drill a hole of 0.08 / 2mm.

12 Frame Assembly You can install your integrated fixed screen as you want using the different dedicated grooves projection screen fabric / corner bracket 4. Insert the flat corner brackets into one of the grooves of the short frame piece. Repeat for all four flat corner brackets. 5. Press the corner tightly together and pre-drill a hole of 0.08 / 2mm. The hole should not be centered in the hole of the bracket but should be slightly away from the corner of the frame. 6. If your frame came with frame stiffeners, attach them to the long frame sections using the M6 x 10 bolts and the square nuts which were inserted in step 3 above. 12

Projection Screen Material Installation You can install your integrated fixed screen as you want using the different dedicated grooves, in the following steps we will illustrate one of the many

13 Projection Screen Material Installation You can install your integrated fixed screen as you want using the different dedicated grooves, in the following steps we will illustrate one of the many possibilities. projection screen fabric / corner bracket 1. The projection side of the SolidPix projection screen fabric is indicated by a sticker (in one corner of the fabric). Clip it in a groove, using a Pi-Grip. 2. Position the projection screen material using the short (2 / 50mm) pieces of Pi-Grip. Tension the fabric only slightly at this time. Please note that the above picture is concerning a ClearPix2 projection screen fabric. This will soon be replaced with picture for a SolidPix1 projection screen fabric. Please note, the way of attaching a SolidPix1 projection screen fabric is the same way of attaching a ClearPix2 projection screen fabric. 13

You should be able to insert it by hand, but you may use the included mallet if necessary.

14 Projection Screen Material Installation 3. Tension the fabric using the long pieces of Pi-Grip. Begin with the top of the frame. If your frame is equipped with frame stiffeners, cut a piece of Pi-Grip to match the distance between the two frame stiffeners. Begin at one end of the Pi-Grip and work your way towards the other end. You should be able to insert it by hand, but you may use the included mallet if necessary. As you insert the Pi-Grip, apply gentle tension on the fabric along the axis of the Pi-Grip that you are inserting. 4. Once you have finished clipping the fabric, verify that the tension is even and sufficient. You may want to lift the frame and inspect the front side. If necessary, retension the fabric by removing and reinserting the Pi-Grip. Once you are satisfied with the tension, trim the excess fabric with the fabric cutting tool. Leave about 1 ( 25mm) of spare fabric outside of the edge of the PI-Grip for future potential retensioning. Please note that the above pictures are concerning a ClearPix2 projection screen fabric. These will soon be replaced with pictures for a SolidPix1 projection screen fabric. Please note, the way of attaching a SolidPix1 projection screen fabric is the same way of attaching a ClearPix2 projection screen fabric. 14

15 Mounting Dimensions 3.2" 81mm 0.7" 17mm 3.2" 81mm 0.3" 8.20m 0.7" 17mm 0.32" 8.20mm Side Mounting Top Mounting There are 4 flat wall-mounting brackets. Each has a tapered notch to be hung on a hanging bolt up to 8mm (5/16 ) diameter. The hanging brackets attach to the frame with square nuts which can slide in any of the grooves around the frame s perimeter. The brackets can be positioned along the top or the sides of the frame. The brackets stand off 12mm (0.5 ) from the surface of the wall. 3.2" 81mm 0.5" 12mm Mounting brackets Frame 15

16 Screen Care Your cinema-quality viewing surface is delicate. Special attention to these instructions should be followed when cleaning. Cleaning your SolidPix Fixed Frame Screen surface NEVER attempt to use solvents, chemicals or abrasive cleaners on the screen. A soft cloth or brush may be used to lightly whisk away any loose dirt or particles. Do not use a sharp instrument to remove any particles. Softly brush from the center to the edges. An upholstery brush attachment on a vacuum cleaner may be used, but only if it is perfectly clean. We encourage you to keep your screen clean. Avoid getting any foreign materials on it, as cleaning it may prove very difficult or even impossible (paint, ink, etc.). Never paint in the vicinity of the screen unless the fabric is completely protected.

ADEO SCREEN Sp. Z o.o. Screen Research Ul. Boelslawa Krzywoustego 31 59-500 Zlotoryja, Poland - Europe Tel. +48 76 850 53 01 Fax + 48 76 850 53 70 North America Tel.

17 ADEO SCREEN Sp. Z o.o. Screen Research Ul. Boelslawa Krzywoustego Zlotoryja, Poland - Europe Tel Fax North America Tel Fax To place orders: To get quotations: orders@screenresearch.com quote@screenresearch.com To contact Technical Support: techsupport@screenresearch.com Copyright 2013 Adeo Screen. All rights reserved. Adeo Screen products are covered by one or more of the following patents: No (France); No (France); No (Europe); No (Europe); No. EP (Europe); No. US B2 (USA); No. US B2 (USA); No. US (USA); USPTO : (USA); No (China); No. 1126/CHENP/2007 (India); No (Japan) pending; ClearPix, ClearPix 2, ClearPix 3; ClearPix 4k, SilverPix 3D; SilverPix 3D Sonic; MultiPix 4K; MultiPix 4K Sonic; SolidPix, SolidPix Sonic, X-Mask, C-Mask, E-Mask, LeWing, TheaterCurve, Pi-Grip, E-Grip, StopLight, DécorMask, TailorMade and the Screen Research logo are all trademarks of Adeo Screen. THX is a trademark of THX Ltd. ISF is a trademark of Imaging Science Foundation Inc.. Sivoia QED and Sivoia QS are the registered trademarks of Lutron Electronics Co., Inc.. All other trademarks are the property of their respective owners.

ClearPix Fixed-Frame Screen Installation Manual

ClearPix Fixed-Frame Screen Installation Manual Introduction / Contents The ClearPix Fixed Frame screen is shipped as a kit for on-site assembly. The kit contains the frame, the projection screen fabric,