Service Parts Catalog. GS-Series Pinsetter. March 2011 / April

Transcription

1 Service Parts Catalog GS-Series Pinsetter March 2011 / April

2 GS-Series Pinsetter Service Parts Catalog March 2011 by Brunswick Bowling and Billiards Corporation GS-10, GS-92, GS-96, GS-98, and GS-X are trademarks of Brunswick Bowling and Billiards Corporation. Reorder Part Number Notice: If available, updates to this manual can be found on-line at com All information contained in this document is subject to change without notice. Brunswick Bowling and Billiards 525 West Laketon Avenue Post Office Box 329 Muskegon, MI U.S.A April 2010

3 Section A ELEVATOR Contents Elevator Frame Assembly...2A Elevator Drive/Lift Assembly...4A Dual Feed Pin Chute Assembly...6A Elevator Assembly - Square Frame Hole Short Pit Machines Series 43 and Above...8A Elevator Assembly - Round Frame Hole Short Pit Machines Series 43 and Above...10A Pin Deflector Boards Short Pit Machines Series 43 and Above...12A Elevator Belt Tensioner Assembly Short Pit Machines Series 43 and Above...14A Section B TRANSPORT BAND Transport Band Frame Assembly (Long Pit)...2B Transport Band Boards (Long Pit)...4B Transport Band Belt (Long Pit)...6B Deflector Boards and Plates (Long Pit)...8B Transport Band Assembly Short Pit Machines Series 43 and Above...10B Transport Band Belt Tensioner Assembly - Left Machine Short Pit Machines Series 43 and Above...12B Transport Band Belt Tensioner Assembly - Right MachineShort Pit Machines Series 43 and Above...14B Section C BALL CUSHION & PIT CURTAIN Ball Cushion Assembly... 2C Dual Feed Overflow Chute... 4C Dual Feed Overflow Chute (Plastic)... 6C Pit Curtain Assembly... 8C Pit Curtain Assembly... 9C Shock Mounted Dual Feed Overflow Chute (Plastic)... 10C Section D ACCELERATOR Accelerator Box Assembly... 2D GS-X/CPO Accelerator Box Assembly... 4D Ball Accelerator... 6D GS-X/CPO Ball Accelerator... 8D Ball Door/Lock Assembly... 10D Section E SWEEP WAGON Sweep Wagon Assembly - with Springs...2E Sweep Wagon Assembly - without Springs (Machine Series 424 and Above)...4E Sweep Release...6E Pre GS-X Sweep Attenuator Assembly...8E GS-X Sweep Attenuator Assembly...10E Section F SETTING TABLE GS-10 - GS-98 Setting Table and Gears...2F GS-X/CPO Setting Table and Gears (Series 424 and Above)...4F GS-10 - GS-98 Setting Table Swing Shafts...6F GS-X/CPO Setting Table Swing Shafts...8F GS-10 Setting Table Switch Cam Assembly...10F GS-10 - GS-98 Spotting Tong Assemblies...12F GS Spotting Tong Assemblies New Style...14F GS-10 and GS-92 Pin Holder Assembly...16F GS-96 - GS-98 Pin Holder Assembly...18F GS-X/CPO Pin Holder Assembly...20F Table Rack and Roller Assembly...22F Table Rack and Roller Assembly (Machine Series 443 and Above)...24F April

4 Section G DRIVE FRAME ASSEMBLIES Left Drive Frame Assembly... 2G Left Drive Frame Assembly (Machine Series 443 and Above)... 4G Gear Cluster Assembly... 6G Gear Cluster Assembly GS-96/GS-98/GS-X)... 8G Table Gear, Sweep Gear and Pulley Drive Assembly... 10G Stroke Limiter Assembly - Horizontal Solenoid... 12G Stroke Limiter Assembly - Vertical Solenoid... 14G Stroke Limiter Assembly (Machine Series 443 and Above)... 16G Front Pulley and V-Belt Tensioner Assembly... 18G Distributor Motor and Mount Assembly... 20G Sweep Motor and Brake Assembly... 22G Setting Table Stop Motor and Mount Assembly... 24G Sweep Drive Assembly... 26G Main Drive Shaft Assembly... 28G Setting Table Pinion Shaft Assembly... 30G Right Drive Frame Assembly... 32G Right Drive Frame Assembly (Machine Series 443 and Above)... 34G Two Piece Guide Tower Assembly... 36G Guide Tower Assembly (Machine Series 443 and Above)... 40G Switch Cluster... 42G Square Shaft Assemblies... 44G Section H MAIN FRAME Frame Assembly (GS-96 and Below)... 2H GS-X Frame Assembly (424 and Above)... 4H Support Braces... 6H Cable Channel (GS-98)... 8H Section J DISTRIBUTOR Dual Feed Distributor... 2J Pin Station Assembly (Machine Series 54 and Below)... 4J Pin Station Assembly (Machine Series 55 to 333)... 6J Universal Pin Station Assembly... 8J Dual Feed Distributor Pulley Shaft Assemblies... 10J Distributor Pulleys... 12J Single Feed Distributor... 14J Single Feed Distributor Pulley Shaft Assemblies... 16J Pin Separator Assembly (Single Feed Distributor)... 18J Pin Head Centering Device Assembly... 20J (Single Feed Distributor)... 20J Pin Head Centering Device Assembly... 22J Distributor Rear Pulley Shaft... 24J Shark Switch Assembly Short Pit Machines Series 43 and Above (Excludes Smart Shark)... 26J Smart Shark (GS - 96)... 28J GS-X Smart Shark... 30J 4 April 2010

5 Section K SILVER BOX/UNIVERSAL VOLTAGE SILVER BOX ELECTRICAL High Voltage Box, Common Box, Gamesetter Box and Cable Assemblies - Silver Box...2K Smart Shark, High Voltage Box, Common Box, Gamesetter Box and Cable Assemblies - Universal Voltage Silver Box..4K SRear Control Box and Plug Assembly with Pin Contacts Cable Assemblies - Silver Box...6K Rear Control Box and Foul & Optical Trigger Cable Assemblies - Universal Voltage Silver Box...8K RL.H.Side Function Solenoids & Switches and Side Switches, R.H. Trouble Light & Ball Door Cable Assemblies - Universal Voltage Silver Box...10K Setting Table Cable Assembly - Silver Box...12K Gamesetter Power & Peripheral Control Cable Assembly - Silver Box...14K Gamesetter Power & Peripheral Control and Setting Table Cable Assemblies - Universal Voltage Silver Box...16K Switch Data and Solenoid Data Cable Assemblies - Silver Box and Universal Voltage Silver Box...18K Player Control Station - Silver Box and Universal Voltage Silver Box...20K Player Control Station and Ball Lift Control Cable Assemblies - Silver Box and Universal Voltage Silver Box...22K Reflector and Ball Detector Assemblies - Silver Box and Universal Voltage Silver Box...24K Ball Accelerator, Table, Sweep and Elevator Motor Cable Assemblies - Universal Voltage Silver Box...26K Ball Rack Reset, High Voltage to Common Box and Power Adapter Cable Assemblies - Universal Voltage Silver Box..28K Manager s Control Box - Silver Box Electrical and Universal Voltage Silver Box...30K N.A. High Voltage Box - Silver Box...32K High Voltage Box - Universal Voltage Silver Box...34K Gamesetter Box - Silver Box and Universal Voltage Silver Box...36K Common Box - Silver Box...38K Common Box - Universal Voltage Silver Box...40K Section L RED BOX ELECTRICAL Low Voltage Electrical Box... 2L High Voltage Electrical Box... 4L Manager s Control Red Box Electrical... 6L Player Control Unit... 8L N.A. Player Control Connector Box... 10L Foul and Trigger Photocells... 12L Tel-E-Foul Connection Boards... 14L Pin Light Assembly... 16L N.A. Remote (Rear) Control Box and Connection Board Assembly... 18L Forward Cables... 20L Machine Cables... 22L Section M GS CONSOLIDATED ELECTRONICS & GS NEXGEN ELECTRONICS GS Consolidated Electronics High Voltage Box Assembly... 2M GS Consolidated Electronics Low Voltage Box Assembly... 4M GS Consolidated Electronics Box Mounting... 6M GS Consolidated Electronics Box Cabling... 8M Reflector and Ball Detector Assemblies - GS Electronics Boxes... 10M Reflector and Ball Detector Assemblies - GS Electronics Boxes... 11M Nexgen Controller Assembly (Includes Internal Cabling)... 12M Nexgen Controller Assembly External Cabling... 14M Reflector and Ball Detector Assemblies - Nexgen Controller Assembly... 16M April

6 Section N GUARDS Guards... 2N Guards... 4N Guards... 6N GS-10 Long Pit Guards... 8N C-Guards... 10N V-Belt Guard Base/Fixed... 12N Base/Fixed GS-X Machine Guards (Machine Series 443 and Above)... 14N Base/Fixed End Lane/Post Row Side Guards... 16N Base/Fixed Division/Elevator Guards... 18N Fixed Ball Return Guards... 20N Base/Fixed End Lane/Post Row Support Pole... 22N Base/Fixed Sweep Guard... 24N Base/Fixed Emergency Stop Switch... 26N UK Advanced/Advanced Left & Right Side Machine Guards Support Posts... 28N UK Advanced/Advanced Left & Right Side Machine Guards... 30N UK Advanced/Advanced Left & Right Side Upper Machine Guards... 32N UK Advanced/Advanced Division Support Posts... 34N UK Advanced/Advanced Division Machine Guards... 36N UK Advanced Upper Division Machine Guards... 38N UK Advanced/Advanced Rear Hinged Machine Guards... 40N Advanced Rear (Division) Hinged Machine Guards... 42N UK Advanced/Advance with WalkwaymWalkway Support... 44N UK Advanced/Advance w/walkway Sweep Guard... 46N Advanced w/o Walkway Sweep Guard... 48N UK Advanced/Advanced w/walkway... 50N UK Advanced/Advanced Cabling... 52N Consolidated Box Rear Display... 54N U K Advanced/Advanced Safety Controller... 56N UK Advanced/Advanced Interlocks... 58N U K Advanced/Advanced Sensors... 60N Section P MISCELLANEOUS Belt Welding Kit and Belt Cutter...2P Dual Pin Lamp System (Machine Series 443 and Above)...4P 6 April 2010

7 Section A ELEVATOR December A

8 Index No. Part No. Description Deflection Chain Gear w/bearing Complete Lockwasher (12 mm) Bearing Bolt Lower Chain Guide Carriage Bolt (8 mm x 30 mm) Hex Nut (8 mm) Lockwasher (8 mm) N.A. Elevator Frame w/felt Backing Upper Chain Guide Rubber Cord (1.1 m) Elevator Guard Complete Locknut (5 mm) N.A. Holding Bracket 14. N.A. Spacer N.A. Flat Washer (5.3 mm) R.O. Flat Washer (5.3 mm) (Pkg. of 20) N.A. Hex Hd. Cap Screw (5 mm x 25 mm) R.O. Hex Hd. Cap Screw (5 mm x 25 mm) Pkg. of N.A. Rubber Stop Hex Hd. Cap Screw (5 mm x 16 mm) Hex Hd. Cap Screw (6 mm x 16 mm) Lockwasher (6 mm) Hex Nut (6 mm) Elevator Foot Guard Hex Nut (5 mm) Lockwasher (5 mm) Wood Lag Screw (10 mm x 40 mm) Flat Washer (10.5 mm) N.A. Handle Hex Hd. Cap Screw (12 mm x 25 mm) Retaining Ring (17 mm) Transport Band Hold Down Clamp Hex Hd. Cap Screw (8 mm x 20 mm) Flat Washer (8.4 mm) Trouble Light Assembly (12V) * Lamp Only (12V) Trouble Light Bracket Switch (Red Box) Switch Bracket Switch (Silver Box) Shovel Alignment Bracket Hex Hd. Cap Screw (8 mm x 25 mm) Flat Washer (8.4 mm) 41. N.A. Locknut (8 mm) Elevator Repair Kit 43. N.A. Repair Kit Plate 44. N.A. Socket Hd. Screw (8 mm x 16 mm) N.A. = No Longer Available R.O. = Replacement Option * Not Illustrated Elevator Frame Assembly 2A December 2009

9 Elevator Frame Assembly December A

10 Index No. Part No. Description Hex Hd. Cap Screw (6 mm x 40 mm) Lockwasher (6 mm) Flat Washer (6 mm x 25 mm x 1.8 mm) Spacer Toothed Wheel w/cam Ball Bearing for Bearing Plate (6203ZZ) Hex Hd. Cap Screw (6 mm x 12 mm) Flat Washer (6.4 mm) Bearing Plate Complete Carrier Wheel w/bearing Complete Retaining Ring (17 mm) N.A. Flat Washer (17 mm) R.O. Flat Washer (17 mm) Pkg. of Drive Gear Drive Spindle Hex Hd. Cap Screw (6 mm x 10 mm) Key (5 mm x 5 mm x 25 mm) Locknut (4 mm) Switch Mounting Plate Switch Complete Sltd. Machine Screw (4 mm x 10 mm) N.A. Hitch Pin (3 mm x 62 mm) R.O. Hitch Pin (3 mm x 62 mm) Pkg. of N.A. Spacer Grooved Pulley R.H. Pin Turn Lever L.H. Pin Turn Lever N.A. PVC Bearing Tension Spring Hex Hd. Cap Screw (5 mm x 30mm) Flat Washer (5.3 mm) Locknut (5 mm) Flat Washer (8.4 mm) Chain Gear w/toothed Wheel and Bearing Complete N.A. = No Longer Available R.O. = Replacement Option Index No. Part No. Description /8" Chain w/shovel Pins Complete (4318 mm Long) Spacer Washer (40 mm x 5.1 mm) Retaining Ring Ext. (12 mm) N.A. Flat Washer (12 mm) R.O. Flat Washer (12 mm) Pkg. of Nylon Track Wheel (large) Pin Shovel Only N.A. Pin Shovel Complete R.O. Pin Shovel Assembly Pin Shovel Complete Pivoting Lever 41. N.A. Nylon Track Wheel (small) 42. N.A. Flat Washer (10.5 mm) 43. N.A. Retaining Ring (10 mm) 44. N.A. Locknut (6 mm) Hex Nut (6 mm) Spring Split Pin (1.6 mm x 16 mm) Flat Washer (8.4 mm) Ejecting Flap Socket Hd. Cap Screw (5 mm x 25 mm) Socket Hd. Cap Screw (5 mm x 16 mm) Rubber Plate N.A. Nylon Bumper Split Pin (2 mm x 16 mm) Hex Hd. Cap Screw (8 mm x 25 mm) Lockwasher (8 mm) Hex Nut (5 mm) Hex Nut (8 mm) Hex Hd. Cap Screw (8 mm x 50 mm) Cross Lever Pivoting Lever Assembly Master Link w/long Pin Standard Master Link Chain Break Tool Elevator Chain Repair Kit (includes 10 pins) Rubber Bumper 66. * Ejector Flap Rebuild Kit * Includes Index Nos. 1, 2, 17, 26, 29, 44, 45, 46, 47, 48 & 50 Elevator Drive/Lift Assembly 4A December 2009

11 Elevator Drive/Lift Assembly December A

12 Index No. Part No. Description Counter Weight N.A. Hitch Pin (3 mm x 60 mm) R.O. Hitch Pin (3 mm x 60 mm) Pkg. of N.A. Flat Washer (14 mm) R.O. Flat Washer (14 mm) Pkg. of Bushing "Y" Switch Flipper Shaft N.A. Dual Feed Pin Chute w/o "Y" Switch & Deflector Shoe (nose block) Hex Hd. Cap Screw (8 mm x 25 mm) Deflector Shoe Locknut (8 mm) Flat Washer (8.4 mm) Hex Hd. Cap Screw (10 mm x 25 mm) Lockwasher (10 mm) Hex Hd. Cap Screw (10 mm x 60 mm) Flat Washer (10.5 mm) Hex Hd. Cap Screw (10 mm x 20 mm) Cross Brace Locknut (5 mm) Socket Hd. Cap Screw (6 mm x 16 mm) N.A. Hex Hd. Cap Screw (5 mm x 25 mm) R.O. Hex Hd. Cap Screw (5 mm x 25 mm) Pkg. of N.A. Plastic Tube 22. *N.A. L.H. Stopper Arm R.H. Stopper Arm (shown) Hex Hd. Cap Screw (5 mm x 30 mm) N.A. PVC Bearing Plastic Ring L.H. Flipper Stopper Assembly Complete * R.H. Flipper Stopper Assembly Complete 27. N.A. "Y" Switch Assembly Complete Rubber Cord Dual Feed Pin Chute Plate 30. N.A. R.H. Pin Chute Repair Plate (ten pin side) L.H. Pin Chute Repair Plate (seven pin side) N.A. = No Longer Available R.O. = Replacement Option * Not Illustrated Dual Feed Pin Chute Assembly 6A December 2009

13 Dual Feed Pin Chute Assembly December A

14 Index No. Part No. Description N.A. Elevator Frame Complete Bearing Plate Hex Hd. Machine Screw (8 mm x 20 mm) Lockwasher (8 mm) Flat Washer (8.4 mm) Hex Nut (8 mm) Set Screw (8 mm x 80 mm) 8. N.A. Drive Shaft Shovel Guide Wheel Upper Chain Sprocket Flange Self-Tapping Screw (6 mm x 16 mm) V-Belt Pulley Key (5 mm x 5 mm x 20 mm) Retaining Ring (17 mm) Shovel Guide Hex Hd. Machine Screw (8 mm x 40 mm) Locknut (8 mm) Flat Washer (8.4 mm) Wedge Guide Rear Wooden Chain Guide Carriage Bolt (8 mm x 35 mm) Front Wooden Chain Guide Damper Guide Lower Pan Guide Well Nut Slotted Machine Screw (8 mm x 30 mm) Slide Band Rivet (8.9 mm) Deflection Chain Gear w/bearing Complete Lockwasher (12 mm) Hex Hd. Machine Screw (12 mm x 25 mm) /8 Chain w/shovel Pins Complete (3556 mm long) Bearing Bolt Pin Shovel Complete Spacer Washe (40 mm x 5.1 mm) Retaining Ring (12 mm) N.A. Flat Washer (12 mm) R.O. Flat Washer (12 mm) Pkg. of Large Nylon Track Wheel Pin Shovel Only Pivoting Lever Small Nylon Track Wheel Flat Washer (10.5 mm) Retaining Ring (10 mm) R.H. Rear Pin Deflector L.H. Rear Pin Deflector R.H. Front Pin Deflector L.H. Front Pin Deflector Spacer Hex Hd. Machine Screw (8 mm x 70 mm) Flat Washer (9 mm) Ejector Flat Washer (6.4 mm) Hex Hd. Machine Screw (6 mm x 20 mm) Locknut (6 mm) Switch Switch Plate Flat Washer (6.4 mm) Slotted Machine Screw Index No. Part No. Description (4 mm x 40 mm) Locknut (4 mm) Flat Washer (4.3 mm) N.A. Pulley Guard (metal) Self-Tapping Screw (6 mm x 10 mm) Master Link w/long Pin Standard Master Link Chain Tool Elevator Chain Repair Kit N.A. Elevator Rear Guard Only R.O. Elevator Rear Guard Complete Elevator Rear Guard Assembly Lower Pin Plate Camloc Fastener Assembly Hex Hd. Machine Screw (8 mm x 40 mm) Hex Nut (10 mm) Spring Shim Washer N.A. Seal (Washer) Elevator Bracket Mounting Bracket Hex Hd. Machine Screw (8 mm x 16 mm) Slotted Truss Hd. Machine Screw (8 mm x 50 mm) N.A. Flat Washer (17 mm) R.O. Flat Washer (17 mm) Pkg. of N.A. Mechanic s Switch Assembly V-Belt (1900 mm) Cable Channel Support Assembly 83. N.A. Elevator Assembly Complete Cone Bearing Assembly N.A. Shim Washer (18 mm x 30 mm x 1.5 mm) Key Flat Washer (18 mm) N.A. Shim Washer (18 mm) R.O. Shim Washer (18 mm) Pkg. of Guard (GS-10/GS-92) Trouble Light Assembly (12V) * Lamp Only (12V) Elevator Shaft Kit (square frame hole, two pieces) N.A. Rivet (3.2 mm x 7.4 mm) R.O. Rivet (3.2 mm x 7.4 mm) Pkg. of N.A. Hex Hd. Machine Screw (5 mm x 10 mm) Centering Guides N.A. Split Shaft Assembly R.O. Split Shaft Assembly Complete 96. N.A. Split Shaft Coupler Screw (6 mm x 30 mm) Lockwasher (6 mm) N.A. Frame Counter R.O. Frame Counter w/cable 100. * N.A. Chain Lube (spray can) - *G R.O. Pinsetter Chain Lube (12 oz. can) Flat Hd. Socket Screw (M6 x 10 mm) GS-X Label Danger/Warning Label Pulley Guard GS-96 and Above Plastic Mechanic s Remote Box (GS-10) N.A. = No Longer Available R.O. = Replacement Option * Not Illustrated Elevator Assembly - Square Frame Hole Short Pit Machines Series 43 and Above 8A December 2009

15 December 2009 Elevator Assembly - Square Frame Hole Short Pit Machines Series 43 and Above 9A

16 Index No. Part No. Description Hex Hd. Machine Screw (8 mm x 20 mm) Flat Washer (8.4 mm) Guard Nut (4 mm, GS-92) Nut (8 mm, GS-96) N.A. Screw (4 mm x 16 mm) - GS Screw (8 mm x 16 mm) - GS N.A. Mounting Angle 7. N.A. Mounting Plate Lockwasher (8 mm) Front Wooden Chain Guide N.A. Slotted Machine Screw (3 mm x 40 mm) Nut (8 mm) Micro Switch Complete w/mounting Plate and Guard (GS-96 and prior) Micro Switch Only - GS N.A. Guard Plate Nut (3 mm) Hex Locknut (6 mm) Centering Guide (upper) Hex Hd Machine Screw (6 mm x 20 mm) Lockwasher (6 mm) N.A. Elevator Frame Complete - GS S.O. Elevator Frame Complete - GS Screw (8 mm x 16 mm) 21. N.A. Shaft N.A. Metal Pulley Guard - GS R.O. Plastic - Pully Guard Plastic Pulley Guard - GS-96 & above Hex Hd Machine Screw (8 mm x 20 mm) - GS Hex Hd Machine Screw (8 mm x 25 mm) - GS Cross Bar V-Belt (1900 mm) Flange N.A. Bearing Plate Plastic Bearing Flange Rubber Bumper Support Bar Self-Tapping Screw (6 mm x 16 mm) Pulley w/clamp Shock Pad 34. *N.A. Damper Plate Well Nut (8 mm) Clamp Only Hex Hd. Cap Screw (6 mm x 16 mm) 38. ** Shaft Assembly Complete (GS-96 and above) Truss Hd. Mach. Screw (8 mm x 30 mm) Flat Washer (6.4 mm) N.A. Mechanic s Remote Box w/ Cable (Consolidated Electronics) Mechanic s Remote Box w/ Cable (Nexgen Electronics) N.A. Hex Hd. Machine Screw (5 mm x 10 mm) Trouble Light Assembly (12V) *** Lamp Only - Consolidated and Silver Box Electronics (12V) *** Trouble Light Assembly - Nexgen (24V) *** Lamp Only - Nexgen (24V) Flat CTS. Head Screw (6 mm x 10 mm) Bearing Shovel Guide Wheel Gear (Plastic) S.O. Elevator (Complete) N.A. Rear Wooden Chain Guide Key (6 mm x 6 mm x 20 mm) Z-Bracket Nut (8 mm) Mechanic s Remote Box w/cable (GS-10) N.A. = No Longer Available R.O. = Replacement Option S.O. = Special Order * To order entire Damper Plate kit, order (includes index nos. 1, 2, 18, 25, 29, 30, 33, 34, 35, 37, 39, and 40). ** Also order Plastic Bearing Flange ( ) and 2 each Wave Springs, *** Not Illustrated Elevator Assembly - Round Frame Hole Short Pit Machines Series 43 and Above 10A December 2009

17 December 2009 Elevator Assembly - Round Frame Hole Short Pit Machines Series 43 and Above 11A

18 Index No. Part No. Description R.H. Pin Deflector Board L.H. Pin Deflector Board Mounting Bracket Lockwasher (8 mm) Flat Washer (8.4 mm) Hex Hd. Machine Screw (8 mm x 16 mm) Hex Hd. Socket Button Hd. Machine Screw (8mm x 20mm) Flat Washer (8.4 mm) Locknut (8 mm) Lexan Division Barrier Camloc Fastener Assembly Pin Deflector Boards Short Pit Machines Series 43 and Above 12A December 2009

19 December 2009 Pin Deflector Boards Short Pit Machines Series 43 and Above 13A

20 Index No. Part No. Description 1. N.A. Support Bracket (order index # 20) Hex Hd. Machine Screw (8 mm x 65 mm) Flat Washer (8.4 mm) Locknut (8 mm) N.A. Lever Rolled Pin (10 mm x 26 mm) 7. N.A. Bearing Bolt Locknut (10 mm) Round Belt Pulley V-Belt Adaptor Pulley Hex Hd. Machine Screw (6 mm x 25 mm) Flat Washer (6.4 mm) Lockwasher (6 mm) Retaining Ring (17 mm) Threaded Rod (older version) Rod End Adaptor Cotter Pin (2 mm x 16 mm) Flat Washer (10.5 mm) Hex Nut (10 mm) Elevator Belt Tensioner Assembly S.O. Threaded Rod (newer version) N.A. = No Longer Available S.O. = Special Order Elevator Belt Tensioner Assembly Short Pit Machines Series 43 and Above 14A December 2009

21 Elevator Belt Tensioner Assembly Short Pit Machines Series 43 and Above December A

22 Intentionally Blank Page 16A December 2009

23 Section B TRANSPORT BAND December B

24 Index No. Part No. Description N.A. Frame Split Pin (2.5 mm x 25 mm) Flat Washer (15 mm) Roller Roller Bushing Rubber Bumper (16 mm Thread) N.A. Flat Washer (6.4 mm) R.O. Flat Washer (6.4 mm) Flat Washer (6.4 mm) Hex Nut (14 mm) Lockwasher (14 mm) Leg (70 mm) N.A. Leg (90 mm) N.A. Leg (140 mm) N.A. Leg (160 mm) 14. N.A. Transport Band Assembly w/rollers and Carpet Complete N.A. = No Longer R.O. = Replacment Option Available Transport Band Frame Assembly (Long Pit) 2B December 2009

25 Transport Band Frame Assembly (Long Pit) December B

26 Index No. Part No. Description Front Board Complete N.A. Middle Board Complete Rear Board Complete Rear Spacer Wedge Middle Spacer Wedge Front Spacer Wedge Socket Hd. Cap Screw (8 mm x 30 mm) Lockwasher (8 mm) Socket Hd. Cap Screw (8 mm x 45 mm) Socket Hd. Cap Screw (8 mm x 35 mm) Locknut (8 mm) Hex Nut (8 mm) N.A. Carriage Bolt (8 mm x 40 mm) Bracket (front) Bracket (middle) 16. N.A. Carriage Bolt (8 mm x 70 mm) Carriage Bolt (8 mm x 30 mm) Flat Washer (8.4 mm) N.A. = No Longer Available Transport Band Boards (Long Pit) 4B December 2009

27 Transport Band Boards (Long Pit) December B

28 Index No. Part No. Description Transport Band Belt (2450 mm x 1440 mm) 2. N.A. Roller (front) End Cap w/bearings 2 Stud - Rear Roller only N.A. End Cap w/bearings 2 Stud - Front Roller only Spacer Bushing Locknut (8 mm) Flat Washer (8.4 mm) Rolled Pin (3 mm x 26 mm) Spacer Bushing Pulley Screw 11. N.A. Roller (rear) Roller Assembly Complete (front) Roller Assembly Complete (rear) Shaft (rear Roller) Shaft (front Roller) N.A. = No Longer Available Transport Band Belt (Long Pit) 6B December 2009

29 Transport Band Belt (Long Pit) December B

30 Index No. Part No. Description N.A. R.H. Deflector Board N.A. L.H. Deflector Board R.H. Deflector Board L.H. Deflector Board Locknut (8 mm) Carriage Bolt (8 mm x 30 mm) Lockwasher (8 mm) Hex Nut (8 mm) Hex Hd. Cap Screw (8 mm x 20 mm) Flat Washer (8.4 mm) R.H. Deflector Plate L.H. Deflector Plate R.H. Deflector Plate L.H. Deflector Plate Hex Hd. Cap Screw (8 mm x 90 mm) Flat Washer (8.4 mm) N.A. = No Longer Available Deflector Boards and Plates (Long Pit) 8B December 2009

31 Deflector Boards and Plates (Long Pit) December B

32 Index No. Part No. Description R.H. Transport Band Side Frame Complete 2. N.A. R.H. Transport Band Side Frame Only Roller Roller Bushing Retaining Ring (15 mm) N.A. Flat Washer (17 mm) R.O. Flat Washer (17 mm) Pkg. of Socket Hd. Machine Screw (10 mm x 110 mm) R.O. Socket Hd. Machine Screw (M10 x 120 mm) Pkg. of Lock Nut (10 mm) L.H. Transport Band Side Frame Complete 10. N.A. L.H. Transport Band Side Frame Only Hex Hd. Machine Screw (10 mm x 30 mm) Roller Assembly Complete, (front) 3 Stud End Cap - Replaces 2 Stud End Cap Roller Assembly Rubber Well Nut (8 mm, machine series 43 to 76) N.A. Rivot Nut R.O. Side Frame Repair Kit (contains 1 Repair Nut and 1 screw ) End Cap w/bearing (2 Stud Front rollers Only) Flat Washer (8.4 mm) Locknut (8 mm) Shaft - Front Spacer Bushing Roll Pin (3 mm x 30 mm) Transport Band Carpet (2020 mm x 1440 mm) Certified Transport Band Belt L.H. Short Roller Assembly Complete (rear) R.H. Short Roller Assembly Complete (rear) 22. N.A. Roller Only (rear) Housing Deep Groove Ball Bearing Threaded Rod (10 mm x 140 mm) Flat Washer (10.5 mm) Spring Hex Nut (10 mm) Retaining Ring (20 mm) Front Board Assembly Complete Flat Washer (8.4, GS-92) Flat Washer (10.5 mm, GS-96 and above) L.H. Rear Board Assembly - Complete (odd lane) R.H. Rear Board Assembly - Complete (even lane) Index No. Part No. Description V Belt (10 mm x 6 mm x 2560 mm) - use with 110 mm pulley V-Belt (10 mm x 6 mm x 2650 mm) use with 125 mm pulley V-Belt Pulley (110 mm) V-Belt Pulley (125 mm) Rubber Spacer Locknut (3 mm) Sltd. Pan Hd. Machine Screw (8 mm x 50 mm, GS-92) Sltd. Pan Hd. Machine Screw (10 mm x 50 mm, GS-96 and above) N.A. Sltd. Pan Hd. Machine Screw (8 mm x 60 mm, GS-92) R.O. Sltd. Pan Hd. Machine Screw (8 mm x 60 mm, GS-92) Pkg. of He Hd. Cap Screw (10 mm x 60 mm, GS-96 and above) Rubber Washer (3 mm x 24 mm x 8 mm, GS-92) Rubber Washer (3 mm x 28 mm x 10 mm, GS-96 and above) Finishing Washer (8 mm, GS-92) Finishing Washer (5.3 mm x 28 mm x 10.2 mm, GS-96 and above) 41. * Bearing Block Repair Kit Lock Washer (8 mm) N.A. Board Screw Kit (8 mm) Board Screw Kit (10 mm) N.A. Flat Washer (15 mm) Bearing (3-stud) Retaining Ring (52 mm) Hex Head Cap Screw (3 mm x 30 mm) N.A. Spacer Bushing Hex Nut (6 mm) N.A.= No Longer Available R.O.= Repalcement Option * Includes index nos. 23, 24, 25, 26, 27 & 28 NOTE: For faster transport band belt/pulley operation, order Kit part number contains 1 each: (125 mm Pulley), (125 mm V-Belt), (12/15 mm Pulley), and (Polycord Belt) Transport Band Assembly Short Pit Machines Series 43 and Above 10B December January

33 January December Transport Band Assembly Short Pit Machines Series 43 and Above 11B

34 Index No. Part No. Description Support Bracket Hex Hd. Machine Screw (10 mm x 50 mm) Flat Washer (10.5 mm) Hex Hd. Machine Screw (10 mm x 80 mm) Hex Jam Nut (10mm) N.A. Lever (order Index No. 20) Shaft Bearing Self-Tapping Screw (6 mm x 16 mm) V-Belt Pulley for 2560 or 2650 mm V-Belt Retaining Ring (17mm) Round Belt Pulley for 12 or 15 mm Polycord Pulley Clamp Shaft Stop Collar (15 mm) Set Screw (6 mm x 6 mm) Flange Flat Washer (17 mm) Flat Washer (6.4 mm) Transport Band Belt Tensioner Assembly - Complete (left machine) 21. * Tensioner Shaft Retrofit Kit Key (5 mm x 5 mm x 25 mm) Polycord Belt (15 mm dia.) Polycord Belt (15 mm dia. x 7 m) N.A.=No Longer Available * Includes Index Nos. 6, 7, 8, 9, 11, 17, 19 and 22. NOTE: For faster transport band belt/pulley operation, order Kit part number contains 1 each: (125 mm Pulley), (125 mm V-Belt), (12/15 mm Pulley), and or (15 mm Polycord Belt) Transport Band Belt Tensioner Assembly - Left Machine Short Pit Machines Series 43 and Above 12B December 2009

35 December 2009 Transport Band Belt Tensioner Assembly - Left Machine Short Pit Machines Series 43 and Above 13B

36 Index No. Part No. Description Support Bracket Hex Hd. Machine Screw (10 mm x 50 mm) Flat Washer (10.5 mm) Hex Hd. Machine Screw (10 mm x 80 mm) Hex Nut (10 mm) Pivot Arm Round Belt Pulley for 12 mm or 15 mm polycord V-Belt Pulley for 2560 mm or 2650 mm V-Belt Hex Hd. Machine Screw (5 mm x 30 mm) Locknut (5mm) Flat Washer (5.3 mm) Retaining Ring (17 mm) Shaft Stop Collar (15 mm) Set Screw (6 mm x 6 mm) 16. * R.H Machine Transport Band Belt Tensioner Assembly Complete N.A. Polycord Belt (15 mm) R.O. Polycord Belt (15 mm x 7 mm) V Belt (10 mm x 6 mm x 2560 mm) - use with 110 mm pulley V-Belt (10 mm x 6 mm x 2650 mm) - use with 125 mm pulley N.A.= No Longer Available R.O.= Repalcement Option * Includes Index Nos. 7, 8, 9, 10, 11, and 12 Transport Band Belt Tensioner Assembly - Right Machine Short Pit Machines Series 43 and Above 14B December 2009

37 Transport Band Belt Tensioner Assembly - Right Machine Short Pit Machines Series 43 and Above December B

38 Intentionally Blank Page 16B December 2009

39 Section C BALL CUSHION & PIT CURTAIN December C

40 Index No. Part No. Description Stop Collar Bearing Bearing Block Hex Nut (12 mm) N.A. Flat Washer (13 mm) R.O. Flat Washer (13 mm) Pkg. of Lockwasher (12 mm) Socket Hd. Cap Screw (12 mm x 60 mm) Hex Hd. Cap Screw (10 mm x 70 mm) Flat Washer (10.5 mm) Lockwasher (10 mm) Hex Nut (10 mm) Transverse Bar Transverse Bar (short pit) Hex Hd. Cap Screw (10 mm x 55 mm) Pulley Holder Split Pin (2.5 mm x 25 mm) Hex Hd. Cap Screw (6 mm x 45 mm) Flat Washer (18 mm) Flat Washer (6.4 mm) Locknut (6 mm) 20. N.A. Long Brake Plate (for single feed distributors) 21. N.A. Rubber Material (rear) Hydraulic Protector Plate Hex Nut (8 mm) Short Spacer Hex Hd. Cap Screw (10 mm x 45 mm) 26. N.A. Short Brake Plate 27. N.A. Rubber Material (forward) N.A. Truss Hd. Machine Screw (6 mm x 20 mm) R.O. Truss Hd. Machine Screw (6 mm x 20 mm) Pkg. of Rubber Bumper - male (8 mm) Ball Cushion Frame w/bracket (for both R.H. and L.H. machines) Cushion Flap Kit Complete 32. N.A. Ball Cushion Hydraulic Complete N.A. Cushion Flap Assembly R.O. Hydraulic Ball Cushion Assembly 33. N.A. Hydraulic Mounting Plate Hex Hd. Cap Screw (10 mm x 90 mm) Index No. Part No. Description Spacer Mounting Plate Bearing Block 38. N.A. Wood Shim (5 mm) Wood Shim (10 mm) Locknut (10 mm) R.H. Ball Cushion Board w/facing (even lane) Top Ball Cushion Board Carriage Bolt (10 mm x 50 mm) L.H. Ball Cushion Board w/ Facing (odd lane) Carriage Bolt (8 mm x 45 mm) Impact Strip (Black) Hex Hd. Cap Screw (8 mm x 60 mm) Pulley Holder Complete Locknut (8 mm) Flat Washer (10.5 mm) Pulley w/bearing Bushing Socket Hd. Cap Screw (6 mm x 18 mm) Hex Nut (6 mm) Long Spacer 56. N.A. L.H. Ball Cushion Frame Assembly odd lane Complete 57. N.A. R.H Ball Cushion Frame Assembly even lane Complete Ball Cushion Repair Kit Rubber Head Screws Cap 61. N.A. Jam Nut (12 mm x 8 mm) Special Round Top Nut (12 mm) Flat Washer (13 mm) 64. N.A. R.H. Cushion Flap (even lane) 65. N.A. L.H. Cushion Flap (odd lane) N.A. Ball Cushion Hydraulic - Complete (all GS Pinsetters) R.O. Ball Cushion Hydraulic Assembly Spacer (used in new and old Shock) Sealing Ring (all GS Shocks) Compression Spring Bracket Spacer N.A.= No Longer Available R.O. = Replacement Option Ball Cushion Assembly 2C December 2009

41 Ball Cushion Assembly December C

42 Index No. Part No. Description 1. * S.O. R.H. Overflow Chute Complete (long pit version) * N.A. R.H. Overflow Chute Complete (short pit version) - see page 6C R.O. R.H. Overflow Chute w/o Sock Hex Hd. Cap Screw (8 mm x 12 mm) Pan Hd. Machine Screw (5 mm x 12 mm) Locknut (8 mm) Locknut (5 mm) Flat Washer (8.4 mm) Fender Washer (5.3 mm) Overflow Chute Clamp Chute Clamp Kit (consists of 10 clamps only - no banding) Sock (White) Sock - heavy duty (White) Sock (Black) 10. ** S.O. L.H. Overflow Chute Complete (long pit version) ** N.A. L.H. Overflow Chute Complete (short pit version) - see page 6C R.O. L.H. Overflow Chute w/o Sock Sock Brace Only Pin Wipe Felt (for Sock Brace) Felt (for inside wall, long pit version) Felt (for inside wall, short pit version) Felt (for bottom, long pit version) Felt (for bottom, short pit version) Felt (for outside wall, long pit version) Felt (for outside wall, short pit version) 17. N.A. R.H. Overflow Chute Only (long pit version) N.A. R.H. Overflow Chute Only (short pit version) 18. N.A. L.H. Overflow Chute Only (long pit version) N.A. L.H. Overflow Chute Only (short pit version) Bracket Bracket Rubber Mount Mounting Plate Plate Rubber Bumper Countersunk Screw (6 mm x 10 mm) Flat Washer (6.4 mm) Locknut (6 mm) Pan Hd. Machine Screw (5 mm x 16 mm) Hex Hd. Cap Screw (8 mm x 50 mm) Flat Washer (8.4 mm) Hex Hd. Cap Screw (8 mm x 16 mm) N.A.= No Longer Available R.O. = Replacement Option S.O. = Special Order * Includes Index Nos. 3,5,7,8,9,11,13,14,15,16 and 17 ** Includes Index Nos. 3,5,7,8,9,11,13,14,15,16 and 18 Dual Feed Overflow Chute 4C December 2009

43 Dual Feed Overflow Chute December C

44 Index No. Part No. Description Hex Hd. Cap Screw (5 mm x 20 mm) Flat Washer (5.3 mm) Locknut (5 mm) Locknut (8 mm) Hex Hd. Cap Screw (8 mm x 12 mm) Sock (Black) Sock - heavy duty (White) Overflow Chute Clamp 8. * L.H. Plastic Chute 9. * R.H. Plastic Chute Support Bracket N.A. L.H. Chute Assembly R.O. L.H. Chute Assembly w/o Sock N.A. R.H. Chute Assembly R.O. R.H. Chute Assemblyw/o Sock Pin Wipe Chute Bracket N.A.= No Longer Available R.O. = Replacement Option * When ordering - order the new style chute part numbers: L.H. Plastic Chute - only R.H. Plastic Chute - only And order upgrade kit to upgrade to a shock mounted overflow chute, contains parts for two chutes. ** Order new shock mounted overflow chutes: R.H. Chute Assembly w/out Sock L.H. Chute Assembly w/out Sock Reference page 11C. Dual Feed Overflow Chute (Plastic) 6C December 2009

45 December 2009 Dual Feed Overflow Chute (Plastic) 7C

46 Index No. Part No. Description Curtain Pit Curtain Holder 3. N.A. Pit Curtain Support Bracket Socket Hd. Cap Screw (8 mm x 25 mm) Locknut (8 mm) Hex Hd. Cap Screw (8 mm x 25 mm) Flat Washer (8.4 mm) Locknut (10 mm) N.A. Hex Head Cap Screw (8 mm x 20 mm) Pit Curtain Assembly Complete Lockwasher (8 mm) N.A. = No Longer Available Pit Curtain Assembly 8C December 2009

47 Pit Curtain Assembly December C

48 Index No. Part No. Description N.A. Hex Hd. Cap Screw (5 mm x 25 mm) R.O. Hex Hd. Cap Screw (5 mm x 25 mm) Pkg. of Flat Washer (5.3 mm) Locknut (8 mm) Hex Hd. Cap Screw (6 mm x 16 mm) Hex Hd. Cap Screw (8 mm x 16 mm) Sock (Black) Sock - heavy duty (White) Overflow Chute Clamp L.H. Plastic Chute - only R.H. Plastic Chute - only Angle Bracket R.H. Chute Assembly w/out Sock L.H Chute Assembly w/out Sock Rubber Bumper (25 mm x 15mm) Locknut (5 mm) Pressure Plate Locknut (6 mm) Mounting Plate Rubber Bumper (30 mm x 20 mm) Bracket Mounting Bracket Flat Hd. Screw (8 mm x 12 mm) Pin Wipe 22. * Overflow Chute Conversion Kit (contains index numbers: 2, 3, 4, 5, 10, 12, 14, 15, 16, 17, 19 and 20 ) N.A. = No Longer Available R.O. = Replacement Option * Not illustrated Shock Mounted Dual Feed Overflow Chute (Plastic) 10C December 2009

49 Shock Mounted Dual Feed Overflow Chute (Plastic) December C

50 Intentionally Blank Page 12C December 2009

51 Section D ACCELERATOR December D

52 Index No. Part No. Description Ball Accelerator Box Hex Hd. Cap Screw (10 mm x 25 mm) Flat Washer (10.5 mm) Ball Cushion Stop Locknut (10 mm) Ball Door Protector Ring Fiber Plate (small) R.H. Protector Wedge L.H. Protector Wedge Socket Hd. Cap Screw (10 mm x 20 mm) Lockwasher (10 mm) Socket Hd. Cap Screw (10 mm x 45 mm) Protector Wedge (lower) Socket Hd. Cap Screw (10 mm x 35 mm) Flat Hd. Machine Screw (6 mm x 16 mm) Locknut (6 mm) N.A. Fiber Plate (large) Retaining Plate Ladder (short pit) Guard Plate Locknut (8 mm) Hex Hd. Cap Screw (8 mm x 20 mm) Retaining Plate Bracket Flat Washer (9 mm) Washer (8.4 mm) N.A. = No Longer Available Accelerator Box Assembly 2D December 2009

53 Accelerator Box Assembly December D

54 Index No. Part No. Description S.O. Ball Accelerator Box (complete) L.H. Ball Door Protector Plate - 10 pin side R.H. Ball Door Protector Plate - 7 pin side (shown) EJOT Plastic Fastener (Nut Plate) EJOT Plastic Fastener Screw (25 mm x 60 mm) Flat Washer (6.4 mm) N.A. EJOT Screw (60 mm x 50 mm) Hex Socket Cap Screw (6 mm x 60 mm) Axle Wedge Front Accelerator Mount Bracket w/pin Hex Hd. Cap Screw (10 mm x 25 mm) Locknut (10 mm) Flat Washer (10.5 mm) Rear Ball Rod Assembly Mount w/pin Flat Washer (5.3 mm) Locknut (5 mm) Countersunk Screw (5 mm x 12 mm) Ball Cushion Stop Locknut (6 mm) Stop Bracket Hex Nut (8 mm) Rubber Bumper (30 x 20) N.A. = No Longer Available S.O. = Special Order GS-X/CPO Accelerator Box Assembly 4D December April

55 GS-X/CPO Accelerator Box Assembly April December D

56 Index No. Part No. Description N.A. Ball Accelerator Frame R.O. Ball Accelerator Frame (208/230V) * N.A. Ball Accelerator Pkg. (380V) Tension Spring Tension Bar Hex Nut (10 mm) Key (5 mm x 5 mm x 25 mm) Pivoting Lever Axle Flat Hd. Cap Screw (10 mm x 20 mm) Hex HD. Cap Screw (10 mm x 30 mm) Locknut (10 mm) Flat Belt 12. *** Front Driving Drum Complete - Spacers not included * Spacer - needed when replacing Driving Drum (2 each) Rear Driving Drum Complete - spacers not included * Spacer - needed when replacing Driving Drum (2 each) Hex Hd. Cap Screw (8 mm x 25 mm) Flat Washer (10.5 mm) Flat Washer (8.4 mm) Locknut (8 mm) Flat Washer (8.4 mm) Protective Cover (Pkg. of 4) N.A. Carriage Bolt (8 mm x 100 mm) R.O. Carriage Bolt (8 mm x 100 mm) Pkg. of N.A. Strain Relief R.O. Strain Relief N.A. Cable Assembly * Cable Assembly (GS Consolidated Electronics) Ball Rod Transition Track (GS Accelerators to Return Track) Hex Hd. Cap Screw (10 mm x 30 mm) Lockwasher (10 mm) Flat Washer (10.5 mm) Spacer Rubber Bumper (6 mm Thread) Index No. Part No. Description Hex Hd. Cap Screw (6 mm x 25 mm) Hex Nut (6 mm) Motor Mounting Bracket Lockwasher (6 mm) Hex Nut (8 mm) Shaft Split Pin (2.5 mm x 20 mm) Angle Bracket Locknut (6 mm) Bushing Spring Bracket Spring 42. ** Motor Drive Pulley V-Belt (10 mm x 6 mm x 950 mm, 50Cy, export only) V-Belt (10 mm x 6 mm x 925 mm) 60Cy - domestic only) Set Screw (16 mm x 8 mm) Hex Hd. Cap Screw (6 mm x 20 mm) Flat Washer (6.4 mm) Ball Accelerator Motor (1/2 H.P., 230VAC/380VAC) Ball Accelerator Motor (1/2 H.P., 208VAC) Ball Stop (for welded configuration) Guard Bracket Ball Stop Flat Belt Guard Complete Carriage Belt (6 mm x 20 mm) Lockwasher (8 mm) N.A. Ball Wipe w/sleeve N.A. Sleeve only N.A. = No Longer Available * Not Illustrated ** Replaces Motor Drive Pulley *** Replaces Front Drive Drum Ball Accelerator 6D December March