DetectorBoard.txt

DetectorBoard.txt 9-9-2011 Detector Board Rev-B Partlist Part Value Package Description -Resistors------------------------------------------------------------------- R1 N/A 1206 (Generic Thick Film resistor)

SelectivityBoard.txt

SelectivityBoard.txt 9-2-2011 Selectivity Board Rev-A Partlist Part Value Package Description -Resistors------------------------------------------------------------------- R1 0 1206 (Generic Thick Film

SwitcherBoard.txt 9-9-2011 Switcher Board Rev-A Partlist Part Value Package Description -Resistors------------------------------------------------------------------- R1 0 1206 (Generic Thick Film resistor)

S.Sirish Kumar CIRCUIT DIAGRAM

ABSTRACT The energy meter is an electrical measuring device, which is used to record Electrical Energy.Consumed over a specified period of time in terms of units. Every house, small factory, business establishment,

DRTXM2 TRANSMITTER BILL OF MATERIAL IDENT QTY PART NUMBER DESCRIPTION

DRTXM2 TRANSMITTER BILL OF MATERIAL H1 C1-5,7,10-11,15,17-18,20, 22-28,34,38, 43-46,49-53,1A,2A 8 Right Angle LED Mount 0 0.01uf 50V Ceramic Disc Capacitor 31 0.1 UF/50V Decoupling Capacitors C13,14,39-42

UCC38C42 25-Watt Self-Resonant Reset Forward Converter Reference Design

Reference Design UCC38C42 25-Watt Self-Resonant Reset Forward Converter Reference Design UCC38C42 25-Watt Self-Resonant Reset Forward Converter Lisa Dinwoodie Power Supply Control Products Contents 1 Introduction.........................................................................

ADP1864 and ADP1611 Reference Power Design

ADP1864 and ADP1611 Reference Power Design Preliminary Technical Data FCDC 00047 FEATURES Input Voltage 5V +/- 5% Generates two voltages: An adjustable negative voltage that tracks an adjustable positive

Development Board EPC9067 Quick Start Guide. EPC V Half Bridge with Sync FET Bootstrap Gate Drive

Development Board EPC9067 Quick Start Guide EPC8009 65 Half Bridge with Sync FET Bootstrap Gate Drive DESCRIPTION The EPC9067 development board is a 65 maximum device voltage,.7 A maximum output current,

Supertex inc. HV9911DB2 Boost LED Driver Demoboard with 1:3000 Dimming Ratio and Excellent Current Regulation. Board Layout and Connection Diagram

The is an LED driver capable of driving up to twenty 100mA LEDs in series from an input of 9-16V DC. The demoboard uses Supertex s HV9911 IC in a boost topology. The converter has a very good initial regulation,

High Efficiency DC-DC Converter Module

Design Note DN05108/D High Efficiency DC-DC Converter Module Device Application Input Voltage Output Power Topology I/O Isolation NCP12700 Module 9 to 36 Vdc Up to 15 W Output Specification Output Voltage

Supertex inc. HV9971DB1. Isolated, Constant Current HV9971 LED Driver Demoboard. Board Layout and Connection Diagram.

Isolated, Constant Current HV9971 LED Driver Demoboard Board Layout and Connection Diagram Terminals for Monitoring Bus Voltage - + V AC = + 180-265VAC = 18-24V - I OUT = 330mA Connections 1. Input Voltage:

Quantity available (A) Quantity required (R) Sl. No. Deficiency (R - A) Description of Equipment

. 2. 3. 4. 5. 6. (R 203) Semester II EE62 Electric Circuits Laboratory Regulated Power Supply: 0 5 V D.C Function Generator ( MHz) Single Phase Energy Meter Oscilloscope (20 MHz). Digital Storage Oscilloscope

Development Board EPC9066 Quick Start Guide. EPC V Half Bridge with Sync FET Bootstrap Gate Drive

Development Board Quick Start Guide EPC800 0 Half Bridge with Sync FET Bootstrap Gate Drive DESCRIPTION The development board is a 0 maximum device voltage,.7 A maximum output current, half bridge with

SY88422L. General Description. Features. Related Support Documentation. Evaluation Board. Optical Evaluation Board

SY88422L Optical Evaluation Board General Description This optical evaluation board allows for evaluating the performance of the SY88422L while driving a laser. Since the part is designed to work with

IR add-on module circuit board assembly - Jeffrey La Favre January 27, 2015

IR add-on module circuit board assembly - Jeffrey La Favre January 27, 2015 1 2 For the main circuits of the line following robot you soldered electronic components on a printed circuit board (PCB). The

High Efficiency DC-DC Converter Module

Design Note DN05109/D High Efficiency DC-DC Converter Module Device Application Input Voltage Output Power Topology I/O Isolation NCP12700 Module 18 to 160 Vdc Up to 15 W DCM Flyback Isolated Output Specification

Repair instruction. RB wap2nd

Repair instruction RB wap2nd Published November 5, 2015 These repair instructions are for NON WARRANTY repairs only! Please make visual inspection for signs of corrosion or mechanical damages before starting.

Evaluation Board for the AD8333 I/Q Demodulator AD8333-EVALZ

Evaluation Board for the AD333 I/Q Demodulator AD333-EVALZ FEATURES Factory tested and ready to use SMA input and output connectors (7) Configurable jumpers for user options Phase select Provision for

Freescale PRINTED WIRING BOARD ASSEMBLY P/N BOM ITEM QTY REFERENCE DESCRIPTION MFGR PART NUMBER NOTES

BILL OF MATERIALS 1 1 N/A BARE PWB ; RE Rev C for M523XEVB RapidPCB 170-20380 2 46 C1, C2, C3, C4, C12, C13, C14, C15, C18, C19, C24, C25, C26, C27, C37, C34, C39, C70, C71, C72, C73, C74, C75, C76, C77,

Revision of the ADC/DAC Board for NIJ Public Safety Radio

Revision of the ADC/DAC Board for NIJ Public Safety Radio S.M. Shajedul Hasan and S.W. Ellingson July 22, 2008 Contents 1 Introduction 2 2 Revised Design 2 3 Summary 3 A Bill of Materials 7 B Schematic

Precision Switchable Vout Regulator for OTP Applications

Precision Switchable Vout Regulator for OTP Applications Preliminary Technical Data FCDC 00159 FEATURES Output Voltage Switchable between 2.5V 2% and 7.0V 1% Output Current: 0 to 50 ma Input voltage: 3.2

Evaluation board Manual

Evaluation board Manual 11W Down Light AC85-265V MB39C602-EVBSK-01-EX Rev 1.0 Feb. 2013 1. General Description MB39C602-EVBSK-01-EX can light the LED, when the LED load is connected with the output and

TD99101 EVALUATION KIT USER S GUIDE. TD99101 Evaluation Kit. User's Guide March Teledyne e2v, Inc. All Rights Reserved

User's Guide March 2018 TD99101 Evaluation Kit TD99101 EVALUATION KIT USER S GUIDE Information contained herein is classified as EAR99 under the U.S. Export Administration Regulations. Export, re-export

ADP1829 and ADP1715 Reference Design

ADP1829 and ADP1715 Reference Design Preliminary Technical Data FCDC 00058 FEATURES Five Output Voltages: 5.0 V, 3.3 V, 3.3 V low noise, 2.5 V, 1.3 V Output Current: 0.005 A to 1.65 A Input voltage: 8-16

Fairchild Reference Design

Reference Design www.fairchildsemi.com This reference design supports inclusion of the FL7930C, FAN6300H, FAN7346, FSL138MRT, FAN7382, and FAN3111C devices in the design of an offline, 100 W, CCCV, LED

ADP1829. Preliminary Technical Data FCDC FEATURES ADP1829 DESCRIPTION

ADP1829 Preliminary Technical Data FCDC 00089 FEATURES Two Output Voltages: 5.0 V, 3.3 V Output Current: 3 A Input voltage: 8.0-16.0 V Ripple 2% ppk of Output Voltage Transient step ±5%, 50% max load ADP1829

S Powered by +5V Supply. S Input Configurable for Electrical and Optical Evaluation

19-4980; Rev 0; 9/09 MAX3806 Evaluation Kit General Description The MAX3806 evaluation kit (EV kit) is an assembled and tested demonstration board that simplifies evaluation of the MAX3806 receiver for

Component List L2, L3 2 Q1, Q2 2 J1, J3, J4 3

19-1061; Rev 1; 1/99 MAX3664 Evaluation Kit General Description The MAX3664 evaluation kit (EV kit) simplifies evaluation of the MAX3664 transimpedance preamplifier. The MAX3664 is optimized for hybrid

12 Bit 1 GS/s Return-to-Zero DAC Evaluation Board

EVRDA012RZ 12 Bit 1 GS/s Return-to-Zero DAC Evaluation Board Features 2 mating board options for input: UHD or SMA On-Board Balun Conveniently Converts High-Speed Clock Input to Differential Clock Fully

Construction. sunil kumar Electromechanical energy meters. Parts List

Low-cost Energy Meter Using ADE7757 S.C. DWIVEDI sunil kumar Electromechanical energy meters have been the standard for metering the electricity since billing began. But these are now being gradually replaced

PA70 Amplifier Operation and Maintenance Manual

Eclipse Series RF Technology rfinfo@rftechnology.com.au January, 2004 PA70 Amplifier Operation and Maintenance Manual This manual is produced by RF Technology Pty Ltd 10/8 Leighton Place, Hornsby NSW 2077

MAX16818 Evaluation Kit. Evaluates: MAX16818

9-08; Rev 0; 6/07 MAX688 Evaluation Kit General Description The MAX688 evaluation kit (EV kit) is a fully assembled and tested surface-mount printed-circuit board (PCB) designed to evaluate the MAX688

S Input Voltage from 7V Up to HB LED Forward Voltage. S Demonstrates Adaptive Output-Voltage Optimization

19-5077; Rev 0; 12/09 MAX16838 Evaluation Kit General Description The MAX16838 evaluation kit (EV kit) demonstrates the MAX16838 high-brightness LED (HB LED) driver, integrating a step-up DC-DC preregulator

MAX16840 Evaluation Kit Evaluates: MAX16840

19-5925; Rev 0; 6/11 MAX16840 Evaluation Kit General Description The MAX16840 evaluation kit (EV kit) demonstrates the MAX16840 HBLED driver IC used for solid-state lighting (SSL) applications. The EV

SiP11206DB. 200 W 1/16 th Brick IBC Demo Board using SiP Vishay Siliconix

00 W / th Brick IBC Demo Board using SiP0 SiP0DB DESCRIPTION SiP0 is a half-bridge controller for intermediate bus converters. While SiP0 allows for overall better efficiency through out the input voltage

Supertex inc. HV9861ADB2

HV986A LED Driver Demoboard Boost Assisted, Valley Fill, 0VAC Input, 7W Output, 50mA, 0V, Power Factor ~ 9% General Description Certain target markets for LED lighting require a power factor of at least

Evaluates: MAX MAX17016 Evaluation Kit. General Description. Features. Ordering Information. Component List

General Description The MAX706 evaluation kit (EV kit) demonstrates the standard 0A application circuit of the MAX706. This DC-DC converter steps down high-voltage batteries to generate low-voltage core

UM2477. How to use the 75 W digitally controlled constant current HB LED driver. User manual. Introduction

User manual How to use the 75 W digitally controlled constant current HB LED driver Introduction The EVAL LLL004V1 digitally controlled constant current LED driver features a PFC stage and two DC-DC converters

Deficiency (R - A) Sl. No. (A) (R) 7. Pspice / Matlab /other Equivalent software Package) with PC Single Phase Wattmeter

(R 03) Semester II EE6 Electric Circuits Laboratory.. 3. 4. 5. 6. Regulated Power Supply: 0 5 V D.C Function Generator ( MHz) Single Phase Energy Meter Oscilloscope (0 MHz). Digital Storage Oscilloscope

Diagnosing the Future of Medical Applications

Vishay Intertechnology, Inc. Diagnosing the Future of Medical www.vishay.com One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components ResistorS OptoelectronicS INDUCTORS

6. HARDWARE PROTOTYPE AND EXPERIMENTAL RESULTS

6. HARDWARE PROTOTYPE AND EXPERIMENTAL RESULTS Laboratory based hardware prototype is developed for the z-source inverter based conversion set up in line with control system designed, simulated and discussed

CD TRANSPORT SERVICE MANUAL CONTENTS

CD TRANSPORT CONTENTS Performance Specifications... 2 Notes... 2 Rear View and Section Location... 3 Block Diagram... 4 Interconnection Diagram... 5 Main Schematic and PCB... 7-10 Display Schematic and

Implementing multiple-output power supply for home appliances with FAN6605

Design Note DN05096/D Implementing multiple-output power supply for home appliances with FAN6605 Devices FAN6605MX FCD1300N80Z NCV8715 Output voltage 12V (isolated) 5V (isolated) 15V (PGND) 5V (PGND) Applications

Supertex inc. AN-H59. Application Note

Supertex inc. AN-H Application Note High Voltage DC/DC Converter for Supertex Ultrasound Transmitter Demoboards By Afshaneh Brown, Applications Engineer, and Jimes Lei, Applications Manager Introduction

TroubleShooting for RBOmniTIK U- 5HnD

TroubleShooting for RBOmniTIK U- 5HnD These repair instructions are for NON WARRANTY repairs only! Please make visual inspection for signs of corrosion or mechanical damages before starting. No power,

TroubleShooting for RB711GA-5HnD and RB711G-5HnD

TroubleShooting for RB711GA-5HnD and RB711G-5HnD These repair instructions are for NON WARRANTY repairs only! Please make visual inspection for signs of corrosion or mechanical damages before starting.

Workshop Part Identification Lecture N I A G A R A C O L L E G E T E C H N O L O G Y D E P T.

Workshop Part Identification Lecture N I A G A R A C O L L E G E T E C H N O L O G Y D E P T. Identifying Resistors Resistors can be either fixed or variable. The variable kind are called potentiometers

AMSynths AM8044 VCF & VCA. Project Notes V2.0

AMSynths AM8044 VCF & VCA Project Notes V2.0 AMSynths 2013 Rob Keeble Contact: sales@amsynths.co.uk Web Site: www.amsynths.co.uk 18 May 2013 1 Module Description This module is designed around the SSM2044

LAYOUTS. Thomas Henry SSM2164 VCF/VCA v1. Adapter PCB top view (Panel side) Main PCB. Adapter PCB bottom view. 9/13/2016

Thomas Henry SSM VCF/VCA v LAYOUTS The PCB/Panel combo is comprised of one main PCB, an adapter PCB, and an Eurorack format panel. Nevertheless, one can always use just the main PCB to build a module in

Multi-Window Comparator documentation. Written November 15, 2012 Last edited November 15, 2012

Multi-Window Comparator documentation. Written November 15, 2012 Last edited November 15, 2012 I. What is a Multi-Window Comparator? A. A "regular" window comparator is this. B. A Multi-Window Comparator

Supertex inc. HV748DB1 HV748 ±75V 1.25A Ultrasound Pulser Demoboard

HV78DB HV78 ±75V.5A Ultrasound Pulser Demoboard Introduction The HV78 is a monolithic -channel, high speed, high voltage, ultrasound transmitter pulser. This integrated, high performance circuit is in

PMP8020 TPS92560 High Power 20W AR111 Boost LED Driver Reference Design

PMP8020 TPS92560 High Power 20W AR111 Boost LED Driver Reference Design September, 2013 High Power 20W AR111 Boost LED Driver Reference Design 1 Introduction This reference design is to demonstrate a very

*Exposed pad. Ferrite beads (0805) Murata BLM21A102S C15, C16, C31, C32, C37, C45. Maxim Integrated Products 1

19-2159; Rev 0; 9/01 MAX3273 Evaluation Kit General Description The MAX3273 evaluation kit (EV kit) is an assembled demonstration board that provides optical and electrical evaluation of the MAX3273. The

Powering High Speed Analog-to-Digital Converters with Switching Power Supplies

Powering High Speed Analog-to-Digital Converters with Switching Power Supplies By Michael Cobb, Senior Applications Engineer, High Speed Converter Group, Analog Devices Reprinted with Permission from Power

Evaluation Board for Motor Driver, Single-phase, PWM,

Evaluation Board for Motor Driver, Single-phase, PWM, Full-wave, BLDC Motor Overview This evaluation board is designed to provide an easy and quick development platform for single-phase control applications,

MAX15005A Evaluation Kit. Evaluates: MAX15005A

9-0964; Rev 0; 8/07 MAX5005A Evaluation Kit General Description The MAX5005A evaluation kit (EV kit) is a fully assembled and tested PCB that contains an W flyback DC- DC converter for vacuum-fluorescent

MAX19586/MAX19588 Evaluation Kits

9-405; Rev ; /06 MAX9586/MAX9588 Evaluation Kits General Description The MAX9586/MAX9588 evaluation kits (EV kits) are fully assembled and tested PCBs that contain all the components necessary to evaluate

Line-Following Robot

1 Line-Following Robot Printed Circuit Board Assembly Jeffrey La Favre October 5, 2014 After you have learned to solder, you are ready to start the assembly of your robot. The assembly will be divided

CAT4237EVAL2 Evaluation Board for CAT4237 High Voltage White LED Driver

Application Note 24 CAT4237EVAL2 Evaluation Board for CAT4237 High Voltage White LED Driver Denisa Stefan, Applications Engineering Manager denisa.stefan@catsemi.com INTRODUCTION This document describes

Intermediate Bus Converter Demo Board Using SiP11205 or SiP11206

Intermediate Bus Converter Demo Board Using SiP05 or SiP06 SiP05/06DB INTRODUCTION Both SiP05 and SiP06 are controllers for half-bridge intermediate bus converters. The difference between SiP05 and SiP06

Description. THAT 1606/1646 Demo Block Diagram

/ OutSmarts Line Driver IC Demonstration System /-DEMO FEATURES Basic Line Driver Circuit Independent outputs for and ICs COMBO (XLR & TRS) Line Input Connector XLR and ¼" TRS Output Connectors DAC Input

SCHEMATIC TACHO_O DIAG_O PWM_I X1.6 X1.5 X1.8 X1.7 GND R28 R27 R25 R26 DIAG LED1 TP:DIAG R18. 47k. 6k8 R19 R17. 6k8 OFF TP:PWM R23.

1 1 2 2 3 4 2 6 7 5 9 8 3 3 4 4 5 5 6 6 A4960 SCHEMATIC REF X5.4 R21 X5.3 50k 1 2 3 +5 X5.2 STRN_I X5.1 D TITLE: A4960 Customer Demonstration Board D (Ground Bars) USB REV: SIZE: Allegro Microsystems Inc

MAX100 Evaluation Kit. Evaluates: MAX100

19-0330; Rev 0; 11/94 MAX100 Evaluation Kit General Description The MAX100 evaluation kit (EV kit) allows high-speed digitizing of analog signals at 250Msps, using the MAX100 ADC. All circuitry required

S U1 Configured for Filterless Output S U2 Configured for Filtered Output S Fully Assembled and Tested JU104, JU105, SHDN_1, TEMP_1

9-5477; Rev 0; 8/0 MAX98400A Evaluation Kit General Description The MAX98400A evaluation kit (EV kit) configures the MAX98400A Class D amplifier to drive x0w into a pair of 8I speakers in stereo mode,

ADP1829, APD210X and ADP171X Reference Design

ADP1829, APD210X and ADP171X Reference Design Preliminary Technical Data FCDC 00059 FEATURES Seven Output Voltages: 3.6 V, 3.3 V,3.3l V 2.5 V, 1.8 V, 1.25 V, 0.9 V Output Current: 0.002 A to 3.0 A Input

TroubleShooting for RB450Gr2v3

TroubleShooting for RB450Gr2v3 No power, blue LED doesn t shine Check diode D802 Change faulty diode D802 Check Zener diode D803 Check PNP transistor Q802, D804 Change faulty components Check N-channel

ALX-SSB 5 Band Filter Assembly Manual 19 November 2018

ALX-SSB 5 Band Filter Assembly Manual 19 November 2018 Contents Theory of Operation:... 1 Figure 1... 2 Parts Included:... 4 Board Overview:... 5 Figure 2... 5 Figure 3... 5 Board Assembly:... 6 Cable

Reference Design EBC iw for 5V 1A Mini-TA Charger Design

Reference Design EBC10010 iw1700-01 for 5V 1A Mini-TA Charger Design Table of Contents iw1700-01 For Mini-TA Charger Design (AC Input 90 264V AC, Output 5V 1A) EBC10010 1.0. Introduction...3 2.0. Design

MAX98355 Evaluation Kit Evaluates: MAX98355A/MAX98355B

19-6407; Rev 0; 7/12 MAX98355 Evaluation Kit General Description The MAX98355 evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX98355 PCM digital input Class D power amplifier.

Matrix Multimedia Limited Tel Fax

matrix multimedia Electronic Circuits and Components v2.0 Course material with Virtual Laboratories that stimulate, teach & test. This second version of Electronic Circuits and Components is bigger and

DEMO MANUAL DC2013A. LT3952EFE 60V LED Driver with Internal 4A Switch. Description

Description Demonstration Circuit DC2013A is a 60V LED driver with internal 4A switch featuring the LT 3952 monolithic LED driver. It accepts an input voltage from 5V to 36V (with transient to 42V) and

AMBIENT LIGHT DETECTOR

LX1973B AMBIENT LIGHT DETECTOR INTEGRATED PRODUCTS Page 1 INTRODUCTION TO PRODUCT The LX1973B Evaluation Board is available from for evaluating the functionality and performance of the LX1973B ambient

A High-Performance Digital Transceiver Design, Part 3

A High-Performance Digital Transceiver Design, Part 3 Transmit functions take center stage. By Jim Scarlett, KD7O In Part 1, we discussed an architecture that achieves very good transceiver performance,

Demo Board Schematic/Layout

8 7 6 A9 SCHEMATIC A9-DB 0/0/0 :06:8 MICROSYSTEMS EUROPE LTD >SHEET: A A B C D E F G H 9Demo P Normally open link / / X- X- X- X- X- X-6 X-7 PHASEB PHASEA PHASEC X- X- X-6 CSOUT P P G G G6 G7 G8 These

High Voltage OpAmp PR2201 / PR2202

High Voltage Operational Amplifiers PR2201 and PR2202 FEATURES PR2201 is a monolithic high-voltage operational amplifier with JFET input stage and NPN/PNP output stage. The wide common mode input range

MAX12527/MAX12528/MAX12529/ MAX12557/MAX12558/MAX12559 Evaluation Kits

-0; Rev 0; /0 MAX/MAX/MAX/ MAX/MAX/MAX Evaluation Kits General Description The MAX/MAX/MAX/MAX/ MAX/MAX evaluation kits (EV kits) are fully assembled and tested circuit boards that contain all the components

LM2736 Thin SOT23 750mA Load Step-Down DC-DC Regulator

LM2736 Thin SOT23 750mA Load Step-Down DC-DC Regulator General Description The LM2736 regulator is a monolithic, high frequency, PWM step-down DC/DC converter in a 6-pin Thin SOT23 package. It provides

Warm Tube Clock. Before we start, please make sure that you have all required parts that come for the main board :

Warm Tube Clock Assembly Instructions for the main board Introduction Congratulations on your purchase of OSH Nixie Tube Clock. In this document you will see all steps you need to follow in order to successfully

Bill of Materials - Annotated

Page 1 of 6 Bill of Materials - Annotated Home Page Power Supply Local Oscillator Dividers Op Amps; BPF(s) Mixer Bill of Materials Comments Kit Contents Here is the kit as received. Bill of Materials The

List of Figures and Photos

List of Figures and Photos p. xiii List of Tables p. xxv Acknowledgements p. xxix A Short History of References p. 1 Introduction p. 1 The first JFETs and op amps p. 3 The first bandgaps p. 5 The buried-zener

Component Identification

Generic Skills for Microelectronic Engineers Component Identification AIM: To be able to identify common electronic components used in miniature and medium power applications. Methods of labelling, range

Build this Direct Digital Synthesizer "Development Kit" By: Diz Gentzow, W8DIZ

Build this Direct Digital Synthesizer "Development Kit" By: Diz Gentzow, W8DIZ A great tutorial for adding a keypad to the DDS Kit by Bruce, W8BH This manual has been prepared to be read directly on screen.

DrGaN PLUS Development Board - EPC9202 Quick Start Guide. Optimized Half-Bridge Circuit for egan FETs

DrGaN PLUS Development oard - EPC9202 Quick Start Guide Optimized Half-ridge Circuit for egan FETs Single PWM Input Optimized Half ridge Circuit DESCRIPTION This development board, measuring 0.36 x 0.36,

AltiumLive 2017: Component selection for EMC

AltiumLive 2017: Component selection for EMC Martin O Hara Victory Lighting Ltd Munich, 24-25 October 2017 Component Selection Passives resistors, capacitors and inductors Discrete diodes, bipolar transistors,

SCHEMATIC X4.1 X4.2 SPD VDD J6 PWM_OC PWM LED1 GND VSS PWM GND. PWM_Loc. GND 10u BS170G. STRn TP7 TP6 TP8 TP5 SCK SDI SDO SPD. STRn GND GND SPD.

1 1 1 8 7 7 8 A9 SCHEMATIC Allegro Microsystems Inc Worcester MA 010 USA DATE: PCB: 17th Jul 01 EDC AUTHOR: Yi Li SHEET: 1 of 1 REV: SIZE: A. TITLE: D A9 Demonstration Board Rev D X.1 X. X. X. X. X. FTDI

AMBIENT LIGHT DETECTOR

LX1973A AMBIENT LIGHT DETECTOR TM Page 1 INTRODUCTION TO PRODUCT The LX1973A Evaluation Board is available from for evaluating the functionality and performance of the LX1973A ambient light sensor. The

LMZ23610/8/6 and LMZ22010/8/6 Current Sharing Evaluation Board

LMZ23610/8/6 and LMZ22010/8/6 Current Sharing Evaluation Board Introduction The LMZ23610/8/6 and LMZ22010/8/6 SIMPLE SWITCH- ER power modules are easy-to-use DC-DC solution capable of driving up to a 10,

UCC38C42 30-W Synchronous Buck Converter Reference Design (PR112B)

Application Report SLUU143 - February 2003 UCC38C42 30-W Synchronous Buck Converter Reference Design (PR112B) Lisa Dinwoodie System Power ABSTRACT This reference design presents a synchronous buck converter

BMC052. Chordizer Last updated

BMC052. Chordizer Last updated 8-27-2017 If you have any questions, or need help trouble shooting, please e-mail Michael@Bartonmusicalcircuits.com I Overview/Controls/Inputs/Outputs II Schematic III Construction

Power Entry. Input Signal Buffer. Introduction

Introduction The SMN Audio EQ board is designed to give users a platform to prototype active filters for use in audio electronics. The layout has been optimized for two-channel audio, with each channel

Low Cost, Balanced Line Receiver ICs

Low Cost, Balanced Line Receiver ICs THAT 0,, FEATURES Good CMRR: typ. 0 db at 0Hz Low cost, self-contained Excellent audio performance Wide bandwidth: typ. >8. MHz High slew rate: typ. V/μs Low distortion:

OpenAFM. Electronics

OpenAFM Electronics Voice Coils Each coil is controlled by a pair of push-pull amplifiers. One of each pair has a constant output voltage of 2.5v The other member of the pair is controlled by the output

10 2 2,13,15,16,46 27, non-inductive ,26,

HANDS-ON RADIO PARTS LIST (Thanks, John AF4WM and Steve AD7KR) Updated through Experiment 129 Quantities assume all parts available for re-use MAX QTY EXPERIMENT NOTES 1/4 WATT RESISTOR (All values are

Getting started with the STEVAL-ISC004V1 evaluation board for the STUSB4710A USB PD controller with on-board DC-DC

User manual Getting started with the STEVAL-ISC004V1 evaluation board for the STUSB4710A USB PD controller with on-board DC-DC Introduction The STEVAL-ISC004V1 evaluation board is a ready-to-use USB PD

Maxim Integrated Products 1

19-2363; Rev 0; 4/02 MAX3850 Evaluation Kit General Description The MAX3850 evaluation kit (EV kit) is an assembled demonstration board that provides optical or electrical evaluation of the MAX3850. The

Features. Reference Design R-REF01-HB

Features Reference Design Half-bridge voltage up to kv TTL-compatible signal input Single 5V to 4V supply Shoot-through protection Separate input for low and high-side switch for use with different topologies

ANP005. Contents. Application Note AP2001 CCFL Inverter

Contents 1. AP2001 Specifications 1.1 Features 1.2 General Description 1.3 Pin Assignments 1.4 Pin Descriptions 1.5 Block Diagram 1.6 Absolute Maximum Ratings 2. Hardware 2.1 Introduction 2.2 Description

Project: Electromagnetic Ring Launcher

Project: Electromagnetic Ring Launcher Introduction: In science museums and physics-classrooms an experiment is very commonly demonstrated called the Jumping Ring or Electromagnetic Ring Launcher. The

Reference Design EBC894. Dimmable LED Driver with iw3602 (AC Input 90V 135V AC. , Output 3 LEDs)

Reference Design Dimmable LED Driver with iw3602 (AC Input 90V 135V AC Table of Contents Dimmable LED Driver with iw3602 1.0. Introduction...3 2.0. Design Features...3 3.0. Schematic...4 4.0. PCB Layout...

Evaluation Board: Synchronous Buck Converter Integrated FET

ROHM Switching Regulator Solutions Evaluation Board: Synchronous Buck Converter Integrated FET BD9B300MUV-E2EVK-101 (3.3V 3A Output) No.000000000 Introduction This application note will provide the steps