AMIRUL NUR RASHID BIN MOHAMAD AHYAT
|
|
- Jacob Wilson
- 6 years ago
- Views:
Transcription
1 DESIGN A LINE FOLLOWING MOBILE ROBOT WITH DISTANCE MEASUREMENT AMIRUL NUR RASHID BIN MOHAMAD AHYAT MAY 2008
2 DESIGN A LINE FOLLOWING MOBILE ROBOT WITH DISTANCE MEASUREMENT AMIRUL NUR RASHID BIN MOHAMAD AHYAT This Report is submitted in Partial Fulfillment of Requirements for the Bachelor Degree of Electrical Engineering (Control, Instrumentation & Automation) Fakulti Kejuruteraan Elektrik Universiti Teknikal Malaysia Melaka May 2008
3 I hereby declared that I have read through this report and found that it has comply the partial fulfillment for awarding the degree of Bachelor of Electrical Engineering (Control, Instrumentation & Automation) Signature : Supervisor s Name :. Date :.
4 ii I hereby declared that this report is a result of my own work except for the works that have been cited clearly in the references. Signature :.. Student : AMIRUL NUR RASHID BIN MOHAMAD AHYAT Date : 5 May 2008
5 iii Dedication to my beloved parent. Thank you so much for helping.
6 iv ACKNOWLEDGEMENT ASSALAMUALAIKUM..... Firstly I have to thank Allah S.W.T. because the goodness that gives me strength in order to complete my PSM project. I have successfully finished my PSM project even though I have to gone through many difficulties during the process to complete the project. Very special thanks to my parent because of their support in term of financial and advice. Also very special thanks go to my project supervisor, Mr Ahmad Aizan Bin Zulkefle who is so supportive and has contributed a lot of ideas, and advice to me for realizes this project. He also was committed in helping pain to train me to be a versatile designer or engineer. His words of encouragement have kept me going and his kindness has made this project a valuable experience. Last but not least, thanks to all my friend for giving me so much supports to obtain the output of this project and spending their time teaching me about the PIC microcontroller connection, which seems to be very difficult for me to understand before. All the knowledge gained at Universiti Teknikal Malaysia Melaka (UTeM) present here in my PSM project report. I would like to beg my forgiveness for any problems, which occurred during realization this project. Thank You.
7 v ABSTRACT The main purpose of doing this project is to apply micro technologies to the other operational technologies which it can work independently. Mobile robots are autonomous machines that are capable of movement in a given environment in which they can perform desired tasks in unstructured environments without continuous human guidance. Different robots can be autonomous in different ways. Mobile robots are also found in industry, military and security environments, and appear as consumer products. A line following robot is one of the mobile robot where the robot is moving base on the line tracking. The main parts of this mobile robot are sensor, motor and controller. This mobile robot is being program to follow the black line on the white base or floor. The sensor will detect the line on the floor and send signals to controller to be processed. After that, it sends signals to motor to rotate and the robot is moving base on the signal given. To program the mobile robot, Programmable Integrated Circuit (PIC) microcontroller is used to detect black line and moving on the track. The mobile robot is also capable of measuring the distance travelled which is displayed on the Liquid Crystal Display (LCD) in a realtime.
8 vi ABSTRAK Tujuan utama perlaksanaan projek ini adalah untuk mengaplikasikan teknologi di dalam pengoperasian sesuatu teknologi yang boleh bergerak sendiri. Robot mobil merupakan sebuah mesin yang mampu bergerak mengikut arahan yang diberi tanpa memerlukan pengawasan manusia. Robot-robot ini mempunyai tugas yang berlainan bergantung pada arahan yang telah diaturkan. Robot-robot ini boleh dijumpai di industri, kawasan-kawasan sekuriti serat bertindak sebagai penghantar produk. Robot mengikut garisan merupakan suatu robot yang bergerak mengikut garisan yang telah diaturkankan programnya. Robot ini akan bergerak sama ada pada garisan hitam dengan permukaan putih atau pada garisan putih dengan permukaan hitam bergantung pada arahan yang telah diprogramkan. Bahagian-bahagian utama robot mengikut garisan ini adalah seperti motor, mikro-pangawal dan pengesan. Pengesan ini akan mengesan garisan di permukaan lantai dan seterusnya menghantar isyarat pada mikro-pengawal untuk diproses. Selepas itu isyarat tadi akan menggerakkan motor dan robot akan bergerak mengikut isyarat yang diberi. Untuk memprogram robot ini, mikro-pengawal PIC digunakan untuk mengasan garisan. Robot ini juga mampu mengukur jarak pada masa yang sama ketika robot ini bergerak mengikut garisan tersebut. Jarak ukuran tersebut akan dipaparkan pada Paparan Kristal.
9 vii TABLE OF CONTENTS CHAPTER CONTENTS PAGE SUPERVISOR DECLARATION i DECLARATION ii DEDICATION iii ACKNOWLEDGEMENT iv ABSTRACT v ABSTRAK vi TABLE OF CONTENTS vii LIST OF TABLES xi LIST OF FIGURES xii LIST OF ABBREVIATIONS xiv LIST OF APPENDICES xv 1 INTRODUCTION Introduction Problem Statement Objective of project Scope of project Project Schedule (Gantt Chart) Summary 3 2 LITERATURE REVIEW First Review: Robotics Follow System and Method Second Review: Mobile Robot Third Review: Obstacle Following Sensor Scheme for a Mobile Robot 5
10 viii 2.4 Fourth Review: Robot System and Autonomous 5 Mobile Robot 2.5 Fifth Review: Mobile Robot Sensor System Sixth Review: Mobile Robot for Monitoring a Subject Seventh Review: Air Gap Magnetic Mobile Robot Eight Review: Image Transmission System for a 8 Mobile Robot 2.9 Ninth Review: Automated Robotic Measuring System Tenth Review: Robotic Vehicle Eleventh Review: Distance Measuring Apparatus and 11 Distance Measuring Method 2.12 Summary 11 3 METHODOLOGY Flowchart of the Project Project Implementation Information Gathering Literature Review Conceptual Design Selection of the Electronics & Electrical 15 Components Designing the Electronics Circuits for the 15 Robot Software Design Material Selections and Manufacture the Robot 16 Base Assembled the Electronics & Electrical parts to 16 the Robot Test the Functionality of the Robot & Troubleshooting 16
11 ix 3.3 Line Following mobile Robot Design Considerations Concept General Dimension and Robot Shape Wheel Configuration and Wheel Sensor Supply Voltage Actuator Drives Controller PIC Microcontroller PIC 16F877A Pin Diagram Input / Output Pins Programming Languages Conceptual Design of the Line Following Mobile 22 Robot 3.5 Actuators Selection Sensors Selection Base Selection Controllers Selection Summary 26 4 RESULT Conceptual Design Robot Base Assembled the Electronic & Electrical Parts of Robot Positioning of Sensors for the Robot Develop and Testing the Electronics Circuit for 32 the Robot Flowchart of Circuits Testing Drive System 37
12 x 4.6 Writing a Robot Program Example of the Programming Program the PIC Microcontroller Test the Robot Functionality Result from the Test Run Robot Maze Summary 44 5 DISCUSSION QRD1114 Sensors Detect Black or White Line Tape on Different Surfaces Distance Range of QRD1114 Sensing from the Surface Supply Voltage for the Line Following Mobile Robot 47 System 5.4 Summary 48 6 CONCLUSION AND RECOMMENDATION Conclusion Recommendations 50 REFERENCES 51 APPENDICES 53
13 xi LIST OF TABLES NO TITLE PAGE 3.1 Microcontroller Specification Pins in PIC16F Motor Sensors Base Controllers Motor Response to Sensors LED Functionality on Surface After Get Signal from PIC Movement of the Motors The Instruction of the Programming Motor Movement 46
14 xii LIST OF FIGURES NO TITLE PAGE 2.1 Configuration of the Autonomous Mobile Robot Functional Block Diagram According to a First 7 Embodiment of a Mobile Robot 2.3 Overall Block Diagram of the System Embodying the 9 Present Invention 2.4 Embodiment of an Automated Robotic Measuring System Block Diagram Showing the Structure of Distance 11 Measuring Apparatus 3.1 Project Flowchart Pin Diagram of PIC16F Design Concept Design Concept Design Concept Design Concept The Acrylic Robot Base Placement of the Sensors Sensors Schematic Diagram Construct Sensor Circuit on the Proto-Board Flowchart of Circuits Testing Left Sensor Detects White Surface Right Sensor Detects White Surface Middle Sensor Detects White Surface All Sensors Detect Black Line 36
15 xiii 4.11 All Sensors Detect White Surface Drive Motor Schematic Diagram The L Programming Built Programming Compiled Flowchart of Line Following Mobile Robot Line Following Mobile Robot Circuit Diagram Distance Between Sensors and Surface 47
16 xiv LIST OF ABBREVIATION PIC - Programmable Integrated Circuit LCD - Liquid Crystal Display RAM - Random Access Memory LED - Light Emitting Diode IR - Infra-red PLC - Programmable Logic Controller PMMA - Polymethyl Methacrylate
17 xv LIST OF APPENDIX NO TITLE PAGE A Gantt Chart 53 B Full Programming of Line Following Mobile Robot 54 C PIC Microcontroller Programmer Manual (L4128D series) 59 D L293D Datasheet 60 E QRD1113/1114 Reflective Object Sensor Datasheet 65 F PIC16F877 Datasheet 70
18 1 CHAPTER 1 INTRODUCTION 1.1 Introduction The word robot originated from the Czech word robota, which means 'slave labour'. The term robotics was coined by Isaac Asimov in his short science fiction in 1940s, in which he defined robotics as a study of robots. A robot is a reprogrammable multifunctional manipulator designed to move material, parts, tools, or specialized devices through variable programmed motions for performance of a variety of tasks (Snyder, 1985). The word robot is used to refer to a wide range of machines, the common feature of which is that they are all capable of movement and can be used to perform physical tasks. Robots take on many different forms, ranging from humanoid, which mimic the human form and way of moving, to industrial, whose appearance is dictated by the function they are to perform. Robots can be grouped generally as mobile robots (autonomous robots), manipulator robots (industrial robots) and self reconfigurable robots, which can conform themselves to the task at hand. Robots may be controlled directly by a human, such as remotelycontrolled bomb-disposal robots, robotic arms, or shuttles, or may act according to their own decision making ability, provided by artificial intelligence. However, the majority of robots fall in-between these extremes, being controlled by preprogrammed computers. Such robots may include feedback loops such that they can interact with their environment, but do not display actual intelligence.
19 2 Mobile robots are autonomous machines that are capable of movement in a given environment in which can perform desired tasks in unstructured environments without continuous human guidance. Many kinds of robots are autonomous to some degree. Different robots can be autonomous in different ways. The most common class of mobile robots is wheeled robots. A second class of mobile robots includes legged robots while a third smaller class includes aerial robots, usually referred to as unmanned aerial vehicles. Mobile robots are also found in industry, military and security environments, and appear as consumer products. A path finding robot is one of the mobile robot where the robot is moving base on the line tracking. The main parts of the robots are sensor, motor and controller. The line can be in white / black line tape on the floor. The sensor will detect the line on the floor and send signals to controller to be process. After that it send signals to motor to rotate and the robot is moving base on the signal given. 1.2 Problem Statement In factories, the workers usually moved objects or material manually. It will waste a lot of man power and also will waste money to employ them to do the task. This mobile robot can avoid this problem and make easier. Line grids can be placed on the floor to indicate the path that the robot requires to go. 1.3 Objectives The main objective of this project is to assist and expose beginners who wish to learn about robotic system such as micro-controller (PIC16F877A), programming, electrical parts, electronic circuits and also to enhance knowledge and build the creativity in robotic field. Besides that, this project also design a line following mobile robot and display the distance measurement in real-time on the Liquid Crystal Display (LCD).
20 3 1.4 Scope of Project The scope of the project is to design and develop a path finding robot using a line tracking. It consists of designing the electronics part and develops a program. The function of the robot is to find a path base on a line tracking and display the measurement on the LCD on the real time. The robot will move base on the white line on the dark floor sense by an infra-red sensor. 1.5 Project Schedule (Gantt Chart) Project schedule is very important to manage the project. It can make us to finish the project on the fix time. So, it is very important to avoid us from delay the project. (Refer Appendix A) 1.6 Summary This chapter explained about the introduction of the project and the backgrounds of the robot. Besides that, here are also explained about the problem statement, objectives and scope of project. Base of this factor, this project was selected to minor the problem.
21 4 CHAPTER 2 LITERATURE REVIEW 2.1 First Review: Robotic Follow System and Method. Robot platforms, methods, and computer media are disclosed. The robot platform includes preceptors, locomotors, and a system controller, which executes instructions for a robot to follow a target in its environment. The method includes receiving a target bearing and sensing whether the robot is blocked front. If the robot is blocked in front, then the robot's motion is adjusted to avoid the nearest obstacle in front. If the robot is not blocked in front, then the method senses whether the robot is blocked toward the target bearing and if so, sets the rotational direction opposite from the target bearing, and adjusts the rotational velocity and translational velocity. If the robot is not blocked toward the target bearing, then the rotational velocity is adjusted proportional to an angle of the target bearing and the translational velocity is adjusted proportional to a distance to the nearest obstacle in front. 2.2 Second Review: Mobile Robot. A mobile robot which has a communication with a detection target by a motion of the mobile robot or by an utterance from the mobile robot, the mobile robot includes: a personal identification unit detecting an existence of the tag based on a signal transferred from the tag and obtaining the identification information stored on the tag; a position information acquisition unit obtaining
22 5 distance information indicating a distance from the mobile robot to the detection target; a locomotion speed detection unit detecting a locomotion speed of the mobile robot; a personal information acquisition unit acquiring personal information based on the identification information; a communication motion determination unit determining contents of a communication motion based on the personal information; and an operation determination unit adjusting a start timing of each content of the communication motion based on distance information and on the locomotion speed of the mobile robot. 2.3 Third Review: Obstacle Following Sensor Scheme for a Mobile Robot. A robot obstacle detection system including a robot housing which navigates with respect to a surface and a sensor subsystem aimed at the surface for detecting the surface. The sensor subsystem includes an emitter which emits a signal having a field of emission and a photon detector having a field of view which intersects the field of emission at a region. The subsystem detects the presence of an object proximate the mobile robot and determines a value of a signal corresponding to the object. It compares the value to a predetermined value, moves the mobile robot in response to the comparison, and updates the predetermined value upon the occurrence of an event. 2.4 Fourth Review: Robot System and Autonomous Mobile Robot. The present invention relates to a robot system which includes an autonomous mobile robot as well as to the autonomous mobile robot. In the system in which monitoring is performed using the autonomous mobile robot which travels along a predetermined path, the present invention can reduce the interval between the time when a user requests transmission of images or the like and the time when the user obtains the images. The autonomous mobile robot travels along a predetermined path at predetermined times, a camera takes
23 6 photographs at predetermined locations during the travel along the predetermined path, images taken by the camera are stored, and the stored images are sent to a requesting cell phone or the like in response to a transmission request from the cell phone or the like. (Refer Figure 2.1) Figure 2.1: Configuration of the autonomous mobile robot 2.5 Fifth Review: Mobile Robot Sensor System. An object of the present invention is to provide a sensor system which can effect local communications suitable for exchanging information to avoid collisions between mobile robots. The sensor system also prevents collisions between the mobile robots and obstacles. The system is well-suited for a multirobot environment where multiple mobile robots operate. The system includes infrared signal transmitters installed in each of the multiple mobile robots for sending transmission data via infrared signals. The system further includes infrared signal receivers installed in each of the multiple mobile robots for receiving the transmission data sent by the infrared signal transmitters. Each mobile robot includes a control unit. The control unit prepares transmission information which includes mobile robot identification information unique to the mobile robot. The
24 7 transmission information is included in the transmission data sent from the infrared signal transmitter. The control unit also extracts transmission information which is received by the infrared signal receiver. 2.6 Sixth Review: Mobile Robot for Monitoring a Subject. A mobile robot with a diagram indicating a moving path of a subject and a diagram showing a connection between locations, is capable of generating a path on which a subject is predicted to move from information of the subject detected by a detector, a detecting direction of the detector along the path, or tracking the subject by tracing the path, and predicting a location of a destination of the subject even when the subject has moved to another location. Further, the robot is capable of determining an abnormality based on detected location of the subject. (Refer Figure 2.2) Figure 2.2: Functional block diagram according to a first embodiment of a mobile robot
DESIGN AND IMPLEMENTATION OF AN AUTONOMOUS SUMO ROBOT
DESIGN AND IMPLEMENTATION OF AN AUTONOMOUS SUMO ROBOT MOHD.SY AHMAN B. ABU MOS ONN This Project Report submitted impartial Fulfillment of the Requirement for the Bachelor Degree of Electronic Engineering
More informationMAZE SOLVING BALBOT SOON CHI WEI
MAZE SOLVING BALBOT SOON CHI WEI This thesis is submitted as partial fulfillment of the requirements for the award of the degree of Bachelor of Electrical Engineering (Electronics) Faculty of Electrical
More informationSURVEILLANCE ROBOT MUHAMMAD BUKHARI BIN KAMAROZAMAN
SURVEILLANCE ROBOT MUHAMMAD BUKHARI BIN KAMAROZAMAN This Report Is Submitted In Partial Fulfillment Of Requirements For The Bachelor Degree of Electronic Engineering (Industrial Electronic) With Honours
More informationSignature. Supervisor :.. ~.~H-.~.~0~P..?.j.~H~~~.. ~.~.~ Date :...?./!!./~~ ~
.., admit that I had read this report and in my opinion, this report had fulfilled all scope and quality for the Bachelor Degree of Electronic Engineering (Computer Engineering) Signature Supervisor :..
More informationPORTABLE DISTANCE MEASUREMENT MOHD ASHRAF BIN MD SAID
PORTABLE DISTANCE MEASUREMENT MOHD ASHRAF BIN MD SAID This Report Is Submitted In Partial Fulfillment of Requirements For The Bachelor Degree of Electronic Engineering (Industrial Electronic) Faculty of
More informationFINAL YEAR PROJECT REPORT TITLE: MODELING AND PSO-BASED LQR CONTROLLER DESIGN FOR COUPLED TANK SYSTEM FIONA SERINA DAUD B
Universiti Teknikal Malaysia Melaka Fakulti Kejuruteraan Elektrik FINAL YEAR PROJECT REPORT TITLE: MODELING AND PSO-BASED LQR CONTROLLER DESIGN FOR COUPLED TANK SYSTEM FIONA SERINA DAUD B011110074 BACHELOR
More informationINTELLIGENT HOME AUTOMATION SYSTEM (IHAS) WITH SECURITY PROTECTION NEO CHAN LOONG UNIVERSITI MALAYSIA PAHANG
INTELLIGENT HOME AUTOMATION SYSTEM (IHAS) WITH SECURITY PROTECTION NEO CHAN LOONG UNIVERSITI MALAYSIA PAHANG INTELLIGENT HOME AUTOMATION SYSTEM (IHAS) WITH SECURITY PROTECTION NEO CHAN LOONG This thesis
More informationWIRELEES VIBRATION MONITORING SYSTEM (WVMS) WONG YOON KHANG APRIL 2007
WIRELEES VIBRATION MONITORING SYSTEM (WVMS) By WONG YOON KHANG APRIL 2007 ACKNOWLEDGEMENTS It always disturbing when life seems to imitate Engineering. First of all, thank God for letting me complete this
More informationBTST THIN FILM SENSOR APPLICATION: HEAT INDICATOR NUR FAIZAH BINTI JAAFAR
BTST THIN FILM SENSOR APPLICATION: HEAT INDICATOR NUR FAIZAH BINTI JAAFAR SCHOOL OF MICROELECTRONIC ENGINEERING UNIVERSITI MALAYSIA PERLIS 2007 BTST THIN FILM SENSOR APPLICATION: HEAT INDICATOR by NUR
More informationPRODUCT DESIGN IMPROVEMENT USING DESIGN FOR MANUFACTURE AND ASSEMBLY (DFMA) METHODOLOGY
PRODUCT DESIGN IMPROVEMENT USING DESIGN FOR MANUFACTURE AND ASSEMBLY (DFMA) METHODOLOGY MUHAMMAD NAZRUL BIN MOHD YUSOFF UNIVERSITI TEKNIKAL MALAYSIA MELAKA MUHAMMAD NAZRUL B MOHD YUSOFF BACH. DEG. OF MECHANICAL
More informationARDUINO BASED WATER LEVEL MONITOR- ING AND CONTROL VIA CAN BUS TUAN ABU BAKAR BIN TUAN ISMAIL UNIVERSITI MALAYSIA PAHANG
ARDUINO BASED WATER LEVEL MONITOR- ING AND CONTROL VIA CAN BUS TUAN ABU BAKAR BIN TUAN ISMAIL UNIVERSITI MALAYSIA PAHANG ARDUINO BASED WATER LEVEL MONITORING AND CONTROL VIA CAN BUS TUAN ABU BAKAR BIN
More informationSPDT SWITCH DESIGN USING SWITCHABLE RESONATOR AT 5GHZ FOR WIRELESS COMMUNICATIONS MOHD HAIDIL BIN ZURAIMI UNIVERSITI TEKNIKAL MALAYSIA MELAKA
SPDT SWITCH DESIGN USING SWITCHABLE RESONATOR AT 5GHZ FOR WIRELESS COMMUNICATIONS MOHD HAIDIL BIN ZURAIMI UNIVERSITI TEKNIKAL MALAYSIA MELAKA SPDT Switch Design using Switchable Resonator at 5GHz for Wireless
More informationELECTRONIC WAU CONTROLLER NOR HASYIMAH BINTI MAT ALI
ELECTRONIC WAU CONTROLLER NOR HASYIMAH BINTI MAT ALI This thesis is Part Fulfillment of the Requirement for a Bachelor Degree of Electrical Engineering (Electronic) Faculty of Electrical & Electronic Engineering
More informationPRODUCT DESIGN EVALUATION OF LUCAS HULL DFMA METHOD MOHD NAFIS BIN MOHAIZI
PRODUCT DESIGN EVALUATION OF LUCAS HULL DFMA METHOD MOHD NAFIS BIN MOHAIZI A report submitted in partial fulfillment of the requirement for the award of the degree of Bachelor of Mechanical Engineering
More informationDRAWBOT RADZI BIN NORZAN
DRAWBOT RADZI BIN NORZAN This thesis is submitted as partial fulfillment of the requirements for an award of the Bachelor of the Electrical Engineering (Electronics) Faculty of Electric and Electronic
More information18V TO 1000V BOOST CONVERTER BENNEDICT BALLY ANAK NAROK UNIVERSITI MALAYSIA PAHANG
18V TO 1000V BOOST CONVERTER BENNEDICT BALLY ANAK NAROK UNIVERSITI MALAYSIA PAHANG UNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS JUDUL: 18V TO 1000V BOOST CONVERTER SESI PENGAJIAN: 2009/2010
More informationSTRESS DETECTION USING GALVANIC SKIN RESPONSE SHAHNAZ SAKINAH BINTI SHAIFUL BAHRI UNIVERSITI MALAYSIA PAHANG
STRESS DETECTION USING GALVANIC SKIN RESPONSE SHAHNAZ SAKINAH BINTI SHAIFUL BAHRI UNIVERSITI MALAYSIA PAHANG STRESS DETECTION USING GALVANIC SKIN RESPONSE SHAHNAZ SAKINAH BINTI SHAIFUL BAHRI This thesis
More informationSOFTWARE PROCESS FOR INTEGRATED PATTERN ORIENTED ANALYSIS AND DESIGN (POAD) AND COMPONENT ORIENTED PROGRAMMING (COP) ON EMBEDDED REAL-TIME SYSTEMS
SOFTWARE PROCESS FOR INTEGRATED PATTERN ORIENTED ANALYSIS AND DESIGN (POAD) AND COMPONENT ORIENTED PROGRAMMING (COP) ON EMBEDDED REAL-TIME SYSTEMS SIMBA ANAK BAU` A project report submitted in partial
More informationUniversiti Teknikal Malaysia Melaka (UTeM)
THE DEVELOPMENT OF DATA ACQUISITION SYSTEM USING ARDUINO AND MATLAB HU ZHEN HAN This Report Is Submitted In Partial Fulfillment of Requirements for the Bachelor Degree in Electronic Engineering (Industrial
More informationSMART COLOR SORTING ROBOT SITI NADRAH BINTI SELAMAT
SMART COLOR SORTING ROBOT SITI NADRAH BINTI SELAMAT This report is submitted in partial fulfillment of the requirements for the award of the Bachelor of Electronic Engineering(Electronic Telecommunication)
More informationDEVELOPMENT OF REMOTELY OPERATED UNDERWATER VEHICLE AFIQ FIKRI BIN HAMID UNIVERSITI MALAYSIA PAHANG
DEVELOPMENT OF REMOTELY OPERATED UNDERWATER VEHICLE AFIQ FIKRI BIN HAMID UNIVERSITI MALAYSIA PAHANG DEVELOPMENT OF REMOTELY OPERATED UNDERWATER VEHICLE AFIQ FIKRI BIN HAMID Report submitted in fulfillment
More informationABSTRACT This project focuses on the development of Tyre Lifting System for mobile robot. Mainly, the Tyre Lifting System development consists of three main parts: mechanical part, electrical and electronic
More informationHAND GESTURE RECOGNITION SYSTEM FOR AUTOMATIC PRESENTATION SLIDE CONTROL LIM YAT NAM UNIVERSITI TEKNOLOGI MALAYSIA
HAND GESTURE RECOGNITION SYSTEM FOR AUTOMATIC PRESENTATION SLIDE CONTROL LIM YAT NAM UNIVERSITI TEKNOLOGI MALAYSIA HAND GESTURE RECOGNITION SYSTEM FOR AUTOMATIC PRESENTATION SLIDE CONTROL LIM YAT NAM A
More informationFAKULTI KEJURUTERAAN ELETRIK (FKE) UNIVERSITI TEKNIKAL MALAYSIA MELAKA PROJECT REPORT FINAL YEAR PROJECT
FAKULTI KEJURUTERAAN ELETRIK (FKE) UNIVERSITI TEKNIKAL MALAYSIA MELAKA PROJECT REPORT FINAL YEAR PROJECT DESIGN AND DEVELOPMENT AN INSTRUMENT FOR ROAD WIDTH MEASUREMENT SAIFUL ANWAR BIN HASNAWI BACHELOR
More informationMULTIPLE RFID DOORS CONTROL SYSTEM SYED MOHD SYUKRIZAL BIN AHMAD KORI
MULTIPLE RFID DOORS CONTROL SYSTEM SYED MOHD SYUKRIZAL BIN AHMAD KORI This thesis is submitted as partial fulfillment of the requirements for the award of the Bachelor of Electrical Engineering (Hons.)
More informationConceptual and Mechanical Design of Master- Slave Robot for Painting Application
UNIVERSITI TEKNIKAL MALAYSIA MELAKA Conceptual and Mechanical Design of Master- Slave Robot for Painting Application Thesis submitted in accordance with the partial requirements of the Universiti Teknikal
More informationSPACE VECTOR MODULATION FOR FIVE-PHASE INDUCTION SPEED DRIVE CONTROL NORAZELINA BINTI KAMISMAN. of Bachelor in Electrical Engineering
i SPACE VECTOR MODULATION FOR FIVE-PHASE INDUCTION SPEED DRIVE CONTROL NORAZELINA BINTI KAMISMAN A report submitted in partial fulfilment of the requirement for the degree of Bachelor in Electrical Engineering
More informationTHERMAL ANALYSIS OF H.V INSULATION OIL DURING PARTIAL DISCHARGE DETECTION RASOOL ABDELFADIL GATEA UNIVERSITI TEKNOLOGI MALAYSIA
1 THERMAL ANALYSIS OF H.V INSULATION OIL DURING PARTIAL DISCHARGE DETECTION RASOOL ABDELFADIL GATEA UNIVERSITI TEKNOLOGI MALAYSIA 4 THERMAL ANALYSIS OF H.V INSULATION OIL DURING PARTIAL DISCHARGE DETECTION
More informationSMART BOOST CONVERTER FOR DC ENERGY SOURCE APPLICATION MUNIRAH BT AYUB
i SMART BOOST CONVERTER FOR DC ENERGY SOURCE APPLICATION MUNIRAH BT AYUB A report is submitted in partial fulfillment of the requirements for the award of the degree of Bachelor of Electrical Engineering(Power
More informationUNIVERSITI TEKNIKAL MALAYSIA MELAKA ANALYSIS ON CORNERING PERFORMANCE OF PLC BASED MOBILE ROBOT NAVIGATION SYSTEM
UNIVERSITI TEKNIKAL MALAYSIA MELAKA ANALYSIS ON CORNERING PERFORMANCE OF PLC BASED MOBILE ROBOT NAVIGATION SYSTEM This report submitted in accordance with requirement of the Universiti Teknikal Malaysia
More informationUNIVERSITI TEKNIKAL MALAYSIA MELAKA FACULTY OF ELECTRICAL ENGINEERING FINAL YEAR PROJECT II (FYP II) BEKU 4973
1 UNIVERSITI TEKNIKAL MALAYSIA MELAKA FACULTY OF ELECTRICAL ENGINEERING FINAL YEAR PROJECT II (FYP II) BEKU 4973 SOLAR FARM POWER DISTRIBUTION MONITORING SYSTEM Rosmarni Binti Tajol Asnan Bachelor of Electrical
More informationLEADER FOLLOWER ROBOT LAU WHY CHUONG. A report submitted in partial fulfillment of the requirements for the degree
LEADER FOLLOWER ROBOT LAU WHY CHUONG A report submitted in partial fulfillment of the requirements for the degree of Bachelor of Mechatronics Engineering Faculty of Electrical Engineering (FKE) UNIVERSITI
More informationFAKULTI KEJURUTERAAN ELEKTRIK (FKE) PSM TITLE: DESIGN OF ROBOTIC STRUCTURE FOR PEOPLE WITH DISABILITIES FOR EATING AND DRINKING MOTION (EATING)
1 FAKULTI KEJURUTERAAN ELEKTRIK (FKE) PSM TITLE: DESIGN OF ROBOTIC STRUCTURE FOR PEOPLE WITH DISABILITIES FOR EATING AND DRINKING MOTION (EATING) PREPARED BY: MOHD QUSYAIRI BIN BADRUL HISHAM (4 BEKM) B011010299
More informationGRAPHICS PROCESSING UNIT BASED PARALLEL COPY MOVE IMAGE FORGERY DETECTION SCHEME AHMAD UWAYS BIN ZULKURNAIN
GRAPHICS PROCESSING UNIT BASED PARALLEL COPY MOVE IMAGE FORGERY DETECTION SCHEME AHMAD UWAYS BIN ZULKURNAIN A project report submitted in partial fulfilment of the requirements for the award of the degree
More informationBORANG PENGESAHAN STATUS TESIS
UNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS JUDUL: Saya COMPUTER BASED INSTRUMENTATION SYSTEM FOR TEMPERATURE MEASUREMENT USING RTD IN MATLAB SESI PENGAJIAN: 2007/2008 FAIZ BIN MOHD ZABRI
More informationRESONANT CONTROL OF A FLEXIBLE MANIPULATOR SYSTEM
RESONANT CONTROL OF A FLEXIBLE MANIPULATOR SYSTEM AUWALU MUHAMMAD ABDULLAHI UNIVERSITY TEKNOLOGI MALAYSIA RESONANT CONTROL OF A FLEXIBLE MANIPULATOR SYSTEM AUWALU MUHAMMAD ABDULLAHI A project report submitted
More informationDESIGN AND FABRICATE STORAGE CABINET FOR TURRET PUNCH TOOL MUHAMMAD AFIQ BIN AHMAD MUSTAZA
DESIGN AND FABRICATE STORAGE CABINET FOR TURRET PUNCH TOOL MUHAMMAD AFIQ BIN AHMAD MUSTAZA A report submitted in partial fulfillment of the requirements for the award of the Diploma of Mechanical Engineering
More informationMOTOR SPEED CONTROLLER USING FUZZY LOGIC METHOD FOR PCB DRILLING OPERATION KHAIRUL AZMIL BIN ADZMI UNIVERSITI MALAYSIA PAHANG
MOTOR SPEED CONTROLLER USING FUZZY LOGIC METHOD FOR PCB DRILLING OPERATION KHAIRUL AZMIL BIN ADZMI UNIVERSITI MALAYSIA PAHANG MOTOR SPEED CONTROLLER USING FUZZY LOGIC METHOD FOR PCB DRILLING OPERATION
More informationARDUINO-BASED TEMPERATURE MONITOR- ING AND CONTROL VIA CAN BUS MOHAMMAD HUZAIFAH BIN CHE MANAF UNIVERSITI MALAYSIA PAHANG
ARDUINO-BASED TEMPERATURE MONITOR- ING AND CONTROL VIA CAN BUS MOHAMMAD HUZAIFAH BIN CHE MANAF UNIVERSITI MALAYSIA PAHANG ii ARDUINO-BASED TEMPERATURE MONITORING AND CONTROL VIA CAN BUS MOHAMMAD HUZAIFAH
More informationBORANG PENGESAHAN STATUS TESIS
UNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS JUDUL: SOLAR VENTILATION FAN SESI PENGAJIAN: 2010/2011 Saya FARADILLA BINTI MOD YATIM ( 840830-05-5070 ) (HURUF BESAR) mengaku membenarkan tesis
More informationEliakim Bin Che Yaacob
TO DESIGN AND DEVELOP ISLANDING DETECTION INTERFACE SYSTEM FOR PV CONNECTED MICROGRID Eliakim Bin Che Yaacob Bachelor of Electrical Engineering (Industrial Power) JUNE 2013 I admit that I have read this
More informationSIMULATION AND OPTIMIZATION OF ELECTRICAL DISCHARGE MACHINING PROCESS USING MATLAB ELNAZ KARIMPOUR UNIVERSITI TEKNOLOGI MALAYSIA
i SIMULATION AND OPTIMIZATION OF ELECTRICAL DISCHARGE MACHINING PROCESS USING MATLAB ELNAZ KARIMPOUR UNIVERSITI TEKNOLOGI MALAYSIA 1 SIMULATION AND OPTIMIZATION OF ELECTRICAL DISCHARGE MACHINING PROCESS
More informationDIGITAL CODING SIMULATION USING MICRO-RING RESONATOR FOR LONG DISTANCE COMMUNICATION MASOUD RANJBAR. Universiti Teknologi Malaysia
DIGITAL CODING SIMULATION USING MICRO-RING RESONATOR FOR LONG DISTANCE COMMUNICATION MASOUD RANJBAR Universiti Teknologi Malaysia DIGITAL CODING SIMULATION USING MICRO-RING RESONATOR FOR LONG DISTANCE
More informationCOMPARATIVE EVALUATION OF EXISTING PRODUCT FOR ECO-DESIGN AHMAD ARIF FAHMI BIN TURIN B BMCD.
COMPARATIVE EVALUATION OF EXISTING PRODUCT FOR ECO-DESIGN AHMAD ARIF FAHMI BIN TURIN B041110055 BMCD Email: ariffahmi.turin@gmail.com Draft Final Report Projek Sarjana Muda II Supervisor: DR. MOHD NIZAM
More informationSignature : Supervisor : Date :...
I approve that I have read this thesis thoroughly and in my opinion, this thesis has fulfilled the criteria covering all the aspects of scope and quality and satisfied to be awarded for Bachelor of Mechanical
More informationRobodean / Nunrl Syahida Md. Dahad. ROBOCLEAN. NuruI Syahida Binti Md. Dahad
0000065899 Robodean / Nunrl Syahida Md. Dahad. ROBOCLEAN NuruI Syahida Binti Md. Dahad May 2009 ROBOCLEAN NURUL SYAHIDA BINTI MD. DAHAD A report submitted in partial fulfillment of requirements for the
More informationMODIFIED STEREO VISION METHOD FOR AN UNMANNED GROUND VEHICLE MASOUD SAMADI UNIVERSITI TEKNOLOGI MALAYSIA
MODIFIED STEREO VISION METHOD FOR AN UNMANNED GROUND VEHICLE MASOUD SAMADI UNIVERSITI TEKNOLOGI MALAYSIA MODIFIED STEREO VISION METHOD FOR AN UNMANNED GROUND VEHICLE MASOUD SAMADI A thesis submitted in
More informationUNIVERSITI TEKNIKAL MALAYSIA MELAKA FINAL YEAR PROJECT 2 BEKU 4894
UNIVERSITI TEKNIKAL MALAYSIA MELAKA FINAL YEAR PROJECT 2 BEKU 4894 TITLE: PID CONTROL TUNING USING CUCKOO SEARCH ALGORITHM FOR COUPLED TANK LIQUID LEVEL SYSTEM NAME AIN NADZIRAH BINTI AZMAN IC NO. 900918-10-5898
More informationTRACKING PERFORMANCE OF A HOT AIR BLOWER SYSTEM USING PID CONTROLLER WITH PSO AND HARMONIC SEARCH ALGORITHM ANDY HENG POH SENG
TRACKING PERFORMANCE OF A HOT AIR BLOWER SYSTEM USING PID CONTROLLER WITH PSO AND HARMONIC SEARCH ALGORITHM ANDY HENG POH SENG This Report Is Submitted In Partial Fulfillment Of Requirements For The Bachelor
More informationUNIVERSITI TEKNIKAL MALAYSIA MELAKA. DESIGN MONITORING POSITION SYSTEM OF UTeM BUS
UNIVERSITI TEKNIKAL MALAYSIA MELAKA DESIGN MONITORING POSITION SYSTEM OF UTeM BUS This report submitted in accordance with requirement of Universiti Teknikal Malaysia Melaka (UTeM) for Bachelor s Degree
More informationPID IMPLEMENTATION OF UMP MINI AUTOMATION PLANT PART 1 - HEATING TANK LEE MING JIE
PID IMPLEMENTATION OF UMP MINI AUTOMATION PLANT PART 1 - HEATING TANK LEE MING JIE This thesis is submitted as partial fulfillment of the requirements for the award of the Bachelor of Electrical Engineering
More informationPSO-TUNED PID CONTROLLER FOR COUPLED-TANK SYSTEM (CTS) VIA PRIORITY-BASED FITNESS SCHEME
UNIVERSITI TEKNIKAL MALAYSIA MELAKA FAKULTI KEJURUTERAAN ELEKTRIK FINAL YEAR PROJECT REPORT PSO-TUNED PID CONTROLLER FOR COUPLED-TANK SYSTEM (CTS) VIA PRIORITY-BASED FITNESS SCHEME SHARIFAH YUSLINDA BINTI
More informationA DESIGN METHODOLOGY FOR A SELF-OSCILLATING ELECTRONIC BALLAST AMIRA BINTI MUSTAPA
A DESIGN METHODOLOGY FOR A SELF-OSCILLATING ELECTRONIC BALLAST AMIRA BINTI MUSTAPA A Report Submitted In Partial Fulfilments of the Requirement of the Degree of Bachelor of Electrical Engineering (Power
More informationDESIGN A WIDEBAND LOW-NOISE AMPLIFIER FOR WIRELESS COMMUNICATION USING 0.35-µm CMOS TECHNOLOGY MOHD HAFIZ BIN ABU
DESIGN A WIDEBAND LOW-NOISE AMPLIFIER FOR WIRELESS COMMUNICATION USING 0.35-µm CMOS TECHNOLOGY By MOHD HAFIZ BIN ABU Report submitted in partial fulfillment Of the requirements for the degree Of Bachelor
More informationSignature :... : NORNADIA BINTI JUREMI
iii I hereby declare that this report is the result of my own work except for quotes as cited in the references Signature :... Author Date : NORNADIA BINTI JUREMI : iv I hereby declare that I have read
More informationUNIVERSITI TEKNIKAL MALAYSIA MELAKA
UNIVERSITI TEKNIKAL MALAYSIA MELAKA Development of Controller for Boost Converter This report is submitted in accordance with the requirement of the Universiti Teknikal Malaysia Melaka (UTeM) for the Bachelor
More informationVALVE CONDITION MONITORING BY USING ACOUSTIC EMISSION TECHNIQUE MOHD KHAIRUL NAJMIE BIN MOHD NOR BACHELOR OF ENGINEERING UNIVERSITI MALAYSIA PAHANG
VALVE CONDITION MONITORING BY USING ACOUSTIC EMISSION TECHNIQUE MOHD KHAIRUL NAJMIE BIN MOHD NOR BACHELOR OF ENGINEERING UNIVERSITI MALAYSIA PAHANG VALVE CONDITION MONITORING BY USING ACOUSTIC EMISSION
More informationWIRELESS POWER TRANSFER MONITORING. Ahmad Faiz Bin Ahmad Azahar Bachelor of Electrical Engineering. (Control, Instrumentation & Automation)
WIRELESS POWER TRANSFER MONITORING Ahmad Faiz Bin Ahmad Azahar Bachelor of Electrical Engineering (Control, Instrumentation & Automation) JUNE 2014 SUPERVISOR S ENDORSEMENT I hereby declare that I have
More informationSignature Author Date : 28 February Universiti Teknikal Malaysia Melaka
"I acknowledge indeed that I have read this report and on my opinion this report is sufficient from scope and quality for requirements for the Bachelor The Degree of Electronic Engineering (Industrial
More informationSLIDING MODE CONTROL FOR DC-AC CONVERTER POUYA IZADIFAR
SLIDING MODE CONTROL FOR DC-AC CONVERTER POUYA IZADIFAR A project report submitted in partial fulfilment of the requirements for the award of the degree of Master of Engineering (Electrical-Mechatronics
More informationNURSYAHIDA ASHIKIN BINTI NOR IZLANIN
1 DEVELOPMENTS OF PC BASED CONTROLLER FOR BUCK CONVERTER DRIVEN DC MOTOR NURSYAHIDA ASHIKIN BINTI NOR IZLANIN This thesis is submitted as partial fulfillment of the requirements for the award of the degree
More informationPATTERN AND FREQUENCY RECONFIGURABLE ANTENNA FOR WIRELESS APPLICATIONS DELPHINE ABIJURU. requirements for the award of the degree of
PATTERN AND FREQUENCY RECONFIGURABLE ANTENNA FOR WIRELESS APPLICATIONS DELPHINE ABIJURU A project report submitted in partial fulfilment of the requirements for the award of the degree of Master of Engineering
More informationBUS ALERT SYSTEM (BAS) MOHAMMAD AZIMI BIN BASARY
BUS ALERT SYSTEM (BAS) MOHAMMAD AZIMI BIN BASARY This Report is Submitted in Partial Fulfillment of Requirements for The Bachelor Degree of Electronic Engineering (Telecommunication Electronic) Fakulti
More informationTABLE OF CONTENTS CHAPTER TITLE PAGE
vii TABLE OF CONTENTS CHAPTER TITLE PAGE DECLARATION DEDICATION ACKNOWLEDGEMENT ABSTRACT ABSTRAK TABLE OF CONTENTS LIST OF FIGURES LIST OF ABBREVIATIONS ii iii iv v vi vii xi xiv 1 INTRODUCTION 1 1.1 Overview
More informationDEVELOPMENT OF EARTH LEAKAGE CIRCUIT BREAKER WITH AN AUTO RE-CLOSER UNIT MOHD TARMIZI BIN RAHIM
DEVELOPMENT OF EARTH LEAKAGE CIRCUIT BREAKER WITH AN AUTO RE-CLOSER UNIT MOHD TARMIZI BIN RAHIM This thesis is submitted as partial fulfillment of the requirements for the award of the Bachelor of Electrical
More informationPORTABLE DRAGON FRUIT GRADE SORTER (POWER SUPPLY AND STRUCTURE DESIGN) NOOR RAFIZA BINTI RAMLI
PORTABLE DRAGON FRUIT GRADE SORTER (POWER SUPPLY AND STRUCTURE DESIGN) NOOR RAFIZA BINTI RAMLI May 2008 I hereby declared that I have read through this report and found that it has comply the partial fulfillment
More informationJPEG IMAGE TAMPERING DETECTION BASED ON BLOCKING ARTIFACTS ALI EBRAHIMI
i JPEG IMAGE TAMPERING DETECTION BASED ON BLOCKING ARTIFACTS ALI EBRAHIMI A dissertation submitted in partial fulfillment of the requirements for the award of the degree of Master of Computer Science (Information
More informationOPTIMAL PROPORTIONAL INTEGRAL DERIVATIVE CONTROLLER FOR AUTOMATIC VOLTAGE REGULATOR SYSTEM USING PARTICLE SWARM OPTIMIZATION ALGORITHM
i OPTIMAL PROPORTIONAL INTEGRAL DERIVATIVE CONTROLLER FOR AUTOMATIC VOLTAGE REGULATOR SYSTEM USING PARTICLE SWARM OPTIMIZATION ALGORITHM WAN ZAKARIA BIN WAN HASSAN A project report submitted in partial
More informationOPTIMIZATION OF THE FABRICATION PROCESS PARAMETERS OF AN OPTICAL MODULATOR MOHAMMAD AZWAN SAFWAN BIN HARUN
OPTIMIZATION OF THE FABRICATION PROCESS PARAMETERS OF AN OPTICAL MODULATOR MOHAMMAD AZWAN SAFWAN BIN HARUN This Report Is Submitted In Partial Fulfilment of Requirements for the Bachelor Degree of Electronic
More informationUNIVERSITI TEKNIKAL MALAYSIA MELAKA FINAL YEAR PROJECT REPORT IMPLEMENTATION OF THE SECURITY MAIN GATE
UNIVERSITI TEKNIKAL MALAYSIA MELAKA FACULTY OF ELECTRICAL ENGINEERING FINAL YEAR PROJECT REPORT IMPLEMENTATION OF THE SECURITY MAIN GATE PREPARED BY: MOHD KHAIRERY ABDUL RAHMAN B010610160 BACHELOR OF MECHATRONIC
More informationDEMODULATION AND MODULATION OF HIGH BIT DATA TRANSMISSION IN LOW VOLTAGE SUPPLY SYSTEM ROSMADI BIN ABDULLAH UNIVERSITI TEKNOLOGI MALAYSIA
DEMODULATION AND MODULATION OF HIGH BIT DATA TRANSMISSION IN LOW VOLTAGE SUPPLY SYSTEM ROSMADI BIN ABDULLAH UNIVERSITI TEKNOLOGI MALAYSIA To my beloved mother and father iii iv ACKNOWLEDGEMET In preparing
More informationA GRAY-SCALE IMAGE STEGANOGRAPHY TECHNIQUE USING FIBONACCI 12-BITPLANE DECOMPOSITION AND LSB APPROACH SABAH FADHEL HAMOOD
A GRAY-SCALE IMAGE STEGANOGRAPHY TECHNIQUE USING FIBONACCI 12-BITPLANE DECOMPOSITION AND LSB APPROACH SABAH FADHEL HAMOOD A dissertation submitted in partial fulfillment of the requirements for the award
More informationSYSTEM IDENTIFICATION AND POSITION CONTROL OF PNEUMATIC ACTUATOR USING EMBEDDED SYSTEM TAHA MOHAMMED AHMED SADEQ
SYSTEM IDENTIFICATION AND POSITION CONTROL OF PNEUMATIC ACTUATOR USING EMBEDDED SYSTEM TAHA MOHAMMED AHMED SADEQ A project report submitted in partial fulfilment of the requirements for the award of the
More informationBORANG PENGESAHAN STATUS TESIS
UNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS JUDUL: ANALYSIS OF CONTROL METHODS FOR BOOST DC-DC CONVERTER SESI PENGAJIAN: 2011/2012 Saya FADZLAN NISHA BIN MUHAMAD NASHARUDIN ( 890902-08-5427
More informationPERFORMANCE STUDY OF VIRTUAL FENCING USING WIRELESS SENSING NETWORK CHAN HUI TING UNIVERSITI TEKNOLOGI MALAYSIA
PERFORMANCE STUDY OF VIRTUAL FENCING USING WIRELESS SENSING NETWORK CHAN HUI TING UNIVERSITI TEKNOLOGI MALAYSIA PERFORMANCE STUDY OF VIRTUAL FENCING USING WIRELESS SENSING NETWORK CHAN HUI TING A project
More informationDESIGN AND DEVELOPMENT OF LEAD-THROUGH PROGRAMMING METHOD USING LOW COST INCREMENTAL ENCODER FEEDBACK SAMEH MOHSEN OMER KANZAL
ii DESIGN AND DEVELOPMENT OF LEAD-THROUGH PROGRAMMING METHOD USING LOW COST INCREMENTAL ENCODER FEEDBACK SAMEH MOHSEN OMER KANZAL A report submitted as a partial fulfillment of the requirements for the
More informationTO DESIGN AND FABRICATE A MOVABLE MULTIFUNCTION TABLE MOHAMAD ILME BIN AHMAD BAHRI. Report submitted in partial fulfillment of the requirements
TO DESIGN AND FABRICATE A MOVABLE MULTIFUNCTION TABLE MOHAMAD ILME BIN AHMAD BAHRI Report submitted in partial fulfillment of the requirements For the award of Diploma in Mechanical Engineering Faculty
More informationiii I hereby declare that this report is the result of my own work except for quotes as cited in the references
iii I hereby declare that this report is the result of my own work except for quotes as cited in the references Signature : Author : Nurul Hikma binti A.Radzak Date : 30 April 2011 iv I hereby declare
More informationSPEED CONTROL OF DC MOTOR USING PID CONTROLLER IMPLEMENTATION WITH VISUAL BASIC NURUL IZZATI BINTI PANDAK JABO
SPEED CONTROL OF DC MOTOR USING PID CONTROLLER IMPLEMENTATION WITH VISUAL BASIC NURUL IZZATI BINTI PANDAK JABO This thesis is submitted as partial fulfillment of the requirements for the award of the Bachelor
More informationAN ANALYSIS OF VIVALDI RCS ANTENNA AT 6GHZ FOR SATELLITE COMMUNICATION ETTIE ATHIRA BINTI HADLIN
i AN ANALYSIS OF VIVALDI RCS ANTENNA AT 6GHZ FOR SATELLITE COMMUNICATION ETTIE ATHIRA BINTI HADLIN This Report Is Submitted In Partial Fufillment Of Requirement For The Bachelor of Degree of Electronic
More informationNur Athykah binti Basiran
SIMULATION ON HARMONIC RESONANCE IMPACT OF POWER FACTOR CORRECTION CAPACITOR IN DISTRIBUTION SYSTEM Nur Athykah binti Basiran Bachelor of Electrical Engineering (Power Industry) June 2014 I hereby declare
More informationFABRICATION OF PERPETUAL MOTION WATER DRINKING TOY BIRD CHEE SAI HOW UNIVERSITI MALAYSIA PAHANG
FABRICATION OF PERPETUAL MOTION WATER DRINKING TOY BIRD CHEE SAI HOW UNIVERSITI MALAYSIA PAHANG UNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS JUDUL: FABRICATION OF PERPETUAL MOTION WATER DRINKING
More informationSYSTEM IDENTIFICATION AND INTELLIGENT CONTROL OF AUTOMOTIVE AIR CONDITIONING SYSTEM. MOHD FIRDAUS BIN MOHAMED
SYSTEM IDENTIFICATION AND INTELLIGENT CONTROL OF AUTOMOTIVE AIR CONDITIONING SYSTEM. MOHD FIRDAUS BIN MOHAMED A project report submitted in partial fulfilment of the requirements for the awards of the
More informationTHE PRE-SIZING APPROACH OF DC-DC CONVERTER AS THE APPLICATION TO DESIGN A BUCK CONVERTER FOR THE AUTOMOTIVE DOMAIN NOOR SUHADA BINTI AB RAZAK
i THE PRE-SIZING APPROACH OF DC-DC CONVERTER AS THE APPLICATION TO DESIGN A BUCK CONVERTER FOR THE AUTOMOTIVE DOMAIN NOOR SUHADA BINTI AB RAZAK This thesis is submitted as partial fulfillment of the requirements
More informationVOICE RECOGNITION IGNITION SYSTEM MARK FIDELIS KENSIN UNIVERSITI TEKNIKAL MALAYSIA MELAKA
VOICE RECOGNITION IGNITION SYSTEM MARK FIDELIS KENSIN UNIVERSITI TEKNIKAL MALAYSIA MELAKA SUPERVISOR DECLARATION I hereby declare that I have read this thesis and in my opinion this report is sufficient
More informationTRACKING OF A PERSON IN SEMI-DENSE CROWD ASMIDA BINTI ISMAIL
TRACKING OF A PERSON IN SEMI-DENSE CROWD ASMIDA BINTI ISMAIL A project report submitted in partial fulfilment of the requirements of the degree of Master of Engineering (Electrical-Electronics & Telecommunication)
More informationUNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS
UNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS JUDUL: WELDING FAULT DETECTION USING ACOUSTIC EMISSION TECHNIQUE SESI PENGAJIAN: 2011/2012 Saya, FAREEZ FARHAN BIN SULIMAN (891012-01-5907) (HURUF
More informationSTUDY ON STABILITY OF REFLECTANCE CHARACTERISTICS OF NATURAL FEATURES FOR CALIBRATING REMOTE SENSING DATA
i STUDY ON STABILITY OF REFLECTANCE CHARACTERISTICS OF NATURAL FEATURES FOR CALIBRATING REMOTE SENSING DATA NUR SALISA BINTI CHE SAB UNIVERSITI TEKNOLOGI MALAYSIA i STUDY ON STABILITY OF REFLECTANCE CHARACTERISTICS
More informationCHARACTERIZATION OF LASER BEAM INTENSITY USED FOR MACHINING MOHD SYIMIR HAZIQ BIN NOOR ZAINAL
CHARACTERIZATION OF LASER BEAM INTENSITY USED FOR MACHINING MOHD SYIMIR HAZIQ BIN NOOR ZAINAL Thesis submitted in fulfillment of the requirements for the award of the degree of Bachelor of Mechanical Engineering
More informationCORRELATIVE INTERFEROMETRY FOR ANGLE OF ARRIVAL ESTIMATION AND SIGNAL SOURCE LOCATING USMAN BATURE ISYAKU
CORRELATIVE INTERFEROMETRY FOR ANGLE OF ARRIVAL ESTIMATION AND SIGNAL SOURCE LOCATING USMAN BATURE ISYAKU A project report submitted in partial fulfillment of the requirements for the award of the degree
More informationDESIGN AND IMPLEMENTATION OF ORTHOGONAL FREQUENCY DIVISION MULTIPLEXING RECEIVER NORAZNI BINTI YUSOFF
DESIGN AND IMPLEMENTATION OF ORTHOGONAL FREQUENCY DIVISION MULTIPLEXING RECEIVER NORAZNI BINTI YUSOFF This report is submitted in partial fulfillment of requirement for the award of Bachelor of Electronic
More informationPWM PIC16F877A DIMMING ELECTRONIC BALLAST FOR HPS LAMP NATRA BINTI ISMAIL
i PWM PIC16F877A DIMMING ELECTRONIC BALLAST FOR HPS LAMP NATRA BINTI ISMAIL A project report submitted in partial fulfilment of the requirements for the award of the degree of Master of Engineering (Electrical-Power)
More informationCARBON NANOTUBE FIELD-EFFECT TRANSISTOR FOR A LOW NOISE AMPLIFIER NGU KEK SIANG UNIVERSITI TEKNOLOGI MALAYSIA
CARBON NANOTUBE FIELD-EFFECT TRANSISTOR FOR A LOW NOISE AMPLIFIER NGU KEK SIANG UNIVERSITI TEKNOLOGI MALAYSIA CARBON NANOTUBE FIELD-EFFECT TRANSISTOR FOR A LOW NOISE AMPLIFIER NGU KEK SIANG A project report
More informationADAPTIVE CROSS WIGNER-VILLE DISTRIBUTION FOR PARAMETER ESTIMATION OF DIGITALLY MODULATED SIGNALS CHEE YEN MEI
ADAPTIVE CROSS WIGNER-VILLE DISTRIBUTION FOR PARAMETER ESTIMATION OF DIGITALLY MODULATED SIGNALS CHEE YEN MEI A thesis submitted in fulfilment of the requirements for the award of the degree of Doctor
More informationWIRELESS WEATHER STATION BY USING ZIGBEE
WIRELESS WEATHER STATION BY USING ZIGBEE AHMAD NAQIUDDIN BIN AHMAD SAAHIRY This Report Is Submitted In Partial Fulfillment Requirements For The Bachelor Degree Of Electronic Engineering (Telecommunication)
More informationNIGHT VISION CAMERA SYSTEM FOR INTRUDER DETECTION IN INDOOR AND OUTDOOR ENVIRONMENT SAK JENN SHIN
NIGHT VISION CAMERA SYSTEM FOR INTRUDER DETECTION IN INDOOR AND OUTDOOR ENVIRONMENT SAK JENN SHIN Thesis submitted in partial fulfillment of the requirements for the award of the degree of Bachelor of
More informationPUMP SCHEDULING OPTIMIZATION FOR WATER SUPPLY SYSTEM USING ADAPTIVE WEIGHTED SUM GENETIC ALGORITHM FOLORUNSO TALIHA ABIODUN
PUMP SCHEDULING OPTIMIZATION FOR WATER SUPPLY SYSTEM USING ADAPTIVE WEIGHTED SUM GENETIC ALGORITHM FOLORUNSO TALIHA ABIODUN A project report submitted in partial fulfilment of the requirements for the
More informationCOMPARATIVE STUDY OF REGTANGULAR MICROSTRIP PATCH ANTENNA ARRAY DESIGN ABDULLAHI MOALLIM YUSUF
COMPARATIVE STUDY OF REGTANGULAR MICROSTRIP PATCH ANTENNA ARRAY DESIGN ABDULLAHI MOALLIM YUSUF A project report submitted in partial fulfilment of the requirements for the award of the degree of Master
More informationUNIVERSITI TEKNIKAL MALAYSIA MELAKA
UNIVERSITI TEKNIKAL MALAYSIA MELAKA VISION-BASED LINE FOLLOWING ROBOT This report submitted in accordance with requirement of the Universiti Teknikal Malaysia Melaka (UTeM) for the Bachelor Degree of Manufacturing
More informationPRODUCTIVITY IMPROVEMENTS USING LEAN PRACTICES AT JAPANESE ELECTRICAL AND ELECTRONICS MANUFACTURING AFIF AIMADUDDIN BIN PARNON
PRODUCTIVITY IMPROVEMENTS USING LEAN PRACTICES AT JAPANESE ELECTRICAL AND ELECTRONICS MANUFACTURING AFIF AIMADUDDIN BIN PARNON A project report submitted in partial fulfilment of the requirements for the
More information