Bulletin 700-R -RM Sealed Switch Relays

Size: px

Start display at page:

Download "Bulletin 700-R -RM Sealed Switch Relays"

Abraham Powers
5 years ago
Views:

Bulletin 700-R -RM Sealed Switch Relays Bulletin 700 R, RM Sealed Switch Relays Sealed contacts Extremely long mechanical and electrical life Hazardous locations Class 1, Div Groups A, B, C, D Harsh

1 Bulletin 700-R -RM Sealed Switch Relays Bulletin 700 R, RM Sealed Switch Relays Sealed contacts Extremely long mechanical and electrical life Hazardous locations Class 1, Div Groups A, B, C, D Harsh environments Suitable for applications with shock and vibration High reliability circuit integrity Standards Compliance ISA 1.1 CSA C., No. 13 EN/IEC , -5-1 Certifications culus Listed (File No. E10314, Guide NOIV/NOIV7) CE Marked

2 No. of Poles Electrically Held s Arrangement and Markings AC-Operated Relay Only DC-Operated Relay Only Relay without 700-R000Ä 700DC-R000Ä R00Ä 700DC-R00Ä R110Ä 700DC-R110Ä R00Ä 700DC-R00Ä R400Ä 700DC-R400Ä R310Ä 700DC-R310Ä 700-R0Ä 700DC-R0Ä R130Ä 700DC-R130Ä R040Ä 700DC-R040Ä R600Ä 700DC-R600Ä R510Ä 700DC-R510Ä R40Ä 700DC-R40Ä R330Ä 700DC-R330Ä R40Ä 700DC-R40Ä R150Ä 700DC-R150Ä R060Ä 700DC-R060Ä R800Ä 700DC-R800Ä R710Ä 700DC-R710Ä R60Ä 700DC-R60Ä R530Ä 700DC-R530Ä R440Ä 700DC-R440Ä R350Ä 700DC-R350Ä R60Ä 700DC-R60Ä R170Ä 700DC-R170Ä R080Ä 700DC-R080Ä Ä Coil Voltage Code The as listed is incomplete. Select a voltage code from the table below to complete the Example: 700-R000Ä becomes 700- R000A4. Type of Relay [V] Coil Volts AC 5, 50, 60 Hz A1 A A4 A1 A DC Z4 Z48 Z1 Z Arrangement displays all contacts. Polarity must be observed for DC voltage (700 DC) relays. Location of contacts in pole relays. Location of contacts in 6 pole relays.

No. of Poles Magnetic Latch s Arrangement and Markings AC-Operated Relay Only DC-Operated Relay Only 0 0 0 Relay without 700-RM000Ä 700DC-RM000Ä 0 700-RM00Ä 700DC-RM00Ä 1 1 700-RM110Ä 700DC-RM110Ä 0

3 No. of Poles Magnetic Latch s Arrangement and Markings AC-Operated Relay Only DC-Operated Relay Only Relay without 700-RM000Ä 700DC-RM000Ä RM00Ä 700DC-RM00Ä RM110Ä 700DC-RM110Ä RM00Ä 700DC-RM00Ä RM400Ä 700DC-RM400Ä RM310Ä 700DC-RM310Ä 700-RM0Ä 700DC-RM0Ä RM130Ä 700DC-RM130Ä RM040Ä 700DC-RM040Ä RM600Ä 700DC-RM600Ä RM510Ä 700DC-RM510Ä RM40Ä 700DC-RM40Ä RM330Ä 700DC-RM330Ä RM40Ä 700DC-RM40Ä RM150Ä 700DC-RM150Ä RM060Ä 700DC-RM060Ä RM800Ä 700DC-RM800Ä RM710Ä 700DC-RM710Ä RM60Ä 700DC-RM60Ä RM530Ä 700DC-RM530Ä RM440Ä 700DC-RM440Ä RM350Ä 700DC-RM350Ä RM60Ä 700DC-RM60Ä RM170Ä 700DC-RM170Ä RM080Ä 700DC-RM080Ä Ä Coil Voltage Code The as listed is incomplete. Select a voltage code from the table below to complete the Example: 700-RM000Ä becomes 700- RM000A4. For other coil voltages, contact your local Rockwell Automation sales office or Allen-Bradley distributor. Type of Relay [V] Coil Volts AC 5, 50, 60 Hz A1 A A4 A1 A DC Z4 Z48 Z1 Z Arrangement displays all contacts. Location of contacts in 6 pole relays. Polarity must be observed for DC voltage (700 DC) relays. Location of contacts in pole relays. Accessories Description Pkg. Quantity Relay Rail Simplifies panel layout. These indexed strips are easily cut to the required length and bolted, riveted, or spot-welded in place. Relays are installed adjacent to one another on the mounting strip with the captive mounting screws provided. Rows of relays on Relay Rail form their own wiring trough. Can be used with the following relays: 700P, 700DC-P, 700S-P, 700N, 700-R, 700-RTC 4 Relays 8 Relays 1 Relays 16 Relays MP MP MP MP16

700S-P, 700-N, 700-R, 700-RTC 1 700-DRA A front deck can be attached to Bulletin 700 -, 3-, or 4-pole AC and DC

A dummy cartridge is also available to fill empty space not occupied by a contact cartridge.

700-CR8 700-CR5 700-CR6 700-CR9 DUMMY - Black and -RM Relays) 1 700-CR9 Surge Suppressor When the circuit to a DC

With the addition of the appropriate surge suppressor, the stored energy is absorbed and dissipated limiting the

4 DIN (#3) symmetrical hat rail 35 x 7.5 x 1 m DR1 199-DR1 DIN Rail Adapter Can be used with the following relays: Bulletin 700-P, 700DC-P, 700S-P, 700-N, 700-R, 700-RTC DRA A front deck can be attached to Bulletin 700 -, 3-, or 4-pole AC and DC Type R or RM relays. s These cartridges are used to increase the number of poles of a relay. A dummy cartridge is also available to fill empty space not occupied by a contact cartridge. M M - Green - Yellow - Blue M - Red M RA RA RB RB CR CR CR CR8 700-CR5 700-CR6 700-CR9 DUMMY - Black and -RM Relays) CR9 Surge Suppressor When the circuit to a DC operating coil is opened, the inductive energy stored in the coil can generate very high transient voltages. With the addition of the appropriate surge suppressor, the stored energy is absorbed and dissipated limiting the voltage spikes. A surge suppressor is not required with AC 700-R or -RM relays because the AC operating coil transients are suppressed by a full wave rectifier connected to the coil. 1V DC 1V DC M 4V DC 4V DC M 48V DC 48V DC M FSMA9 1 1

115 15V DC 115 15V DC M 30 50V DC 30 50V DC M 1 199-FSMA10 1 199-FSMA11 Bulletin 700-PS Solid-State Timing Unit You can attach a Bulletin 700-PS solid-state timing unit to 4-pole 700-R or -RM relays.

5 115 15V DC V DC M 30 50V DC 30 50V DC M FSMA FSMA11 Bulletin 700-PS Solid-State Timing Unit You can attach a Bulletin 700-PS solid-state timing unit to 4-pole 700-R or -RM relays. An adaptor kit, 700-N6, is required. See Accessories for description. Bulletin 85S Solid-State Timing Unit You can attach a Bulletin 85S solid-state timing unit to 4-pole 700-R or -RM relays. Application Data Because of the inherent characteristics of this device, the normally open contacts may close before the normally closed contacts open on energization and the normally closed contacts may close before the normally open contacts open on de-energization. Note: For Bul. 700-RM, energizing both the latch and unlatch coil together will cause the relay to be energized and both latch and unlatch coils can be operated together continuously. Ratings AC Voltage NEMA Rating Designation DC Voltage Voltage Make Break Continuous Carrying Current [A] NEMA Rating Designation Volts DC Make/Break Continuous Carrying Current [A] B300 Up to 300V AC 10V NEMA P VA 5 40V C600 Above 300V AC 480V A 5 600V Maximum Allowable Off-State Leakage Current Voltage Maximum Off-State Leakage Current [ma] Type R Maximum Off-State Leakage Current [ma] Type RM 4V DC 3 8 4V AC V AC 5 Relay Data Type 700-R 700-RM Arrangement Material Coil Voltage Range Up to 8 poles, available in any combination of or contacts W (tungsten in a controlled gas atmosphere) 4 50V AC 4 50V DC Coil Power Sealed Voltage Range: % 5.5 VA, 50/60 Hz 5.5 W DC 1.7 VA, 50/60 Hz (latch or unlatch) 1.7 W DC Inrush 5.5 VA, 50/60 Hz 5.5 W DC 1.7 VA, 50/60 Hz (latch or unlatch) 1.7 W DC Pickup Time 30 ms 75 ms min. latch pulse Dropout Time 30 ms 75 ms min. unlatch pulse Operating Temperature C ( F) C ( F) Mounting Haz. Loc. Ratings Panel mount Class I, Division, Groups A, B, C, and D Bulletin 700-R Operating Coils

Coil Volts Bulletin 700 R 8 Pole AC Bulletin 700-R 8 Pole DC 60 Hz 50 Hz 4 77AB7 77AB7 77D15 48 77AB134 77AB134 77D166 110 77AB86 77AB86 115 15 77D155 10

6 Coil Volts Bulletin 700 R 8 Pole AC Bulletin 700-R 8 Pole DC 60 Hz 50 Hz 4 77AB7 77AB7 77D AB134 77AB134 77D AB86 77AB D AB86 77AB AB83 77AB AB83 77AB83 Bulletin 700-R Operating Coil D156 Copyright 014 Rockwell Automation, Inc. All Rights Reserved.

Bulletin 700-RTC Solid-State Timing Relay

Bulletin 700-RTC Solid-State Timing Relay Bulletin 700 RTC Solid State Timing Relay Timing functions 8 ON-delay 8 OFF-delay Timing ranges Seconds: 0.05 2, 0.2 8, 0.4 30, 2 120 Minutes: 0.015 1, 0.06 4,