Trimble Productivity: Take control of your site. Trimble Site Positioning Systems

Transcription

1 Trimble Productivity: Take control of your site Trimble Site Positioning Systems

2 Unmatched jobsite performance The new Trimble Site Positioning System gives the contractor in site preparation, heavy highway, mining, landfill, and waste disposal the ability to quickly resolve problems onsite...and the flexibility to complete any task. When you need site measurement equipment that is productive, simple, easy to use, and delivers the functionality you need to get the job done every day, Trimble Site Positioning Systems are your best choice. Central to the system is your positioning sensor hardware. You can use either GPS or total stations. These can be combined with the Trimble SCS900 Site Controller Software developed specifically for construction applications. With Trimble Site Positioning Systems, you will simplify your operations, increase your efficiency in the field, and minimize your downtime at every stage of the project. Trimble Site Positioning System Applications With Trimble Site Positioning Systems, you can perform a wide range of site positioning and measurement applications. Site foremen, supervisors, grade checkers and site engineers now have the tools to help run the machines on site, to reduce downtime and resolve issues as they arise without office assistance. SITE CONTROL OPERATIONS The Trimble Site Positioning System allows you to calibrate the jobsite for GPS operations,and to record existing and establish new control points in convenient locations for total station operation or daily GPS check shots. General site measurements Position and record the location of features onsite, such as power lines, utilities, manholes, pipe inverts and existing structures. Grade Checking Check both the finished grade and laid material thickness to get an instant report showing areas for rework and overall accuracy and consistency of grading operations. The Site Positioning System helps you identify gross errors, machine problems such as blade slop and wear or site calibration problems.

3 Choose Total Station or GPS Trimble offers a choice of total station or GPS for site measurement and stakeout. Here are some key factors to consider when deciding whether to use GPS or total station for your application requirements Factors Accuracy/Precision needs Safety and accessibility Single or multi-user operation Coverage area from a single setup location Total Station Accuracy <3mm (.12 in) With DR reflectorless capability, measure to dangerous and inaccessible surfaces from remote locations easily and safely. One instrument supports a single rover asset. Line of sight dependent, <800m robotic range for typical topo measurement and stakeout operations. GPS Accuracy <10mm (.39 in); 20mm (.78 in) A single GPS base station supports multiple GPS rovers or GPS machine control systems on the same jobsite. >3 mile (5km) range from base station for typical topo measurement and stakeout operations. With repeater radios or via use of cell phone communications longer ranges are possible. Ease of use and operator skill Easy-to-learn and use SCS900 interface eliminates the complexities associated with traditional surveying systems. The system is designed for use by supervisors, foremen, grade checkers and site engineers. Operating conditions Sensor calibration Ideal where line of sight to the sky is obscured or partially blocked by trees, buildings, structures, bridges or tunnels. Mechanical design needs routine periodic calibration and checks to deliver specified accuracies. Ideal for large, open site operation. Needs no routine calibration to deliver specified accuracies. Progress Volumes Measure your site or material stockpiles to create surface models for the computation of volumes. Volumes can be computed simply within a bounded area, or between two surfaces e.g. original ground and current or between current and finished design. Stakeout Use the Site Positioning System to accurately stake out points, lines, alignments, plane and surfaces. Navigate using the real time map, select the stakeout feature from the live map and display cut / fill to get to grade. As-Built Site Measurement Carry out as-built site measurements for client submission and approval at the end of the project. Produce high-quality reports and improve your reputation with the client.

4 Trimble Site Positioning Systems Total Stations The simple solution to site measurement and stakeout The Trimble SPS700 Construction Total Station builds on over 50 years of total station technology to deliver unmatched performance for construction jobsite applications. The simple solution to all your site measurement and stakeout applications, the SPS700 provides superior tracking during measurement and stakeout, and the single-person operation increases cost savings and productivity. The direct reflectorless measurement system gives the contractor the ability to measure previously unreachable places such as quarry walls or peaks of stockpiles, without having to physically walk to the point being recorded. This long-range system lets the contractor measure up to 300 meters (984 feet) away without the need for a prism. From initial site measurements to finished grading, the SPS700 total station lets you take control of your site measurement and stakeout requirements and eliminates the daily need for contract surveyors. DR300+ Features/Benefits Long-range reflectorless measurement system can measure up to 300 meters away Measure hard-to-reach places such as quarry walls and stockpiles Eliminates the need to put an individual with a conventional prism in a dangerous location Scan surfaces and create an accurate model of objects such as tunnels Robotic option Features/Benefits Single user performs all measurements and stakeout from the rod. With the controller at the rod, stakeout navigation is faster and simpler increasing productivity. With the controller at the rod, site measurement and creating accurate surface models is easier because the operator has total control over the recording of points. Latest 2.4GHz spread spectrum radio technology eliminates interference associated with using traditional total station radio systems. * Licensing approvals are country specific. Contact your Trimble representative for more information.

5 The SPS700 Total Station Long-range reflectorless measurement Quicky and safely measure hardto-reach or unsafe places up to 300m away without a prism or walking on the surface 3D position pointing Quick, accurate stakeout and control point checks, the instrument turns 180 degrees in 3 seconds. Li-Ion battery More than 6 hours robotic operation from one battery at the instrument, and 12 hours operation at the rover rod Innovative Totally cable-free at instrument and robotic rod Exclusive MagDrive TM servos for quiet, effortless operation and the fastest, most accurate and responsive tracking available Unique SurePoint TM technology autocorrects instrument pointing for mislevelment and internal calibrations in real time Internal USB bus operating system Immediate data and communication of instructions between instrument and controller for high-speed response and unmatched performance 2.4 GHz radio License-free operation with reduced interference Handle with full 90 sweep Eccentric, detachable handle for steep sights and operation in tight places ATS TOTAL STATION The Trimble ATS Construction Total Station is a robotic total station enhanced to deliver measurements for both high-accuracy, automatic grade control and construction site measurement applications. It is ideal for contractors looking for a single total station for both grade control operations and site positioning applications. Invest today in an ATS total station measurement system that can be used later for machine control applications as your needs change. Features/Benefits: A fast internal processor that generates six position updates per second for frequent, very high accuracy position determination of fast-moving machines. Synchronized high-accuracy angle and distance measurements with low latency. Active target tracking with target ID guarantees lock onto the correct target all the time, especially in areas where there is more than one reflective object visible to the instrument

6 Trimble Site Positioning Systems GPS Solutions Satellite Tracking Made Simple Trimble SPS750 and SPS850 Modular GPS Receivers are ideal for semi-permanent and permanent base station installations, yet simple enough to configure for daily setups on smaller sites. Purchasing one receiver gives you the equipment versatility you need a base station today and a rover mounted in a site supervisor s vehicle tomorrow. Trimble SPS750 and SPS850 are available with an internal receive and transmit radio, either in 900 MHz or 450 MHz frequencies. With the SPS750 and SPS850 receivers, you can have an internal 900 MHz radio, and an external 450 MHz radio transmitting corrections over both frequencies from one receiver! The Trimble SPS750 and SPS850 receivers provide the Autobase capability which allows you to start a base station the first and every subsequent time by simply pushing the ON/Off key. The receiver determines if it is at a previously used location or at a new location, and automatically performs the setup procedure. The Trimble SPS780 and SPS880 receivers are ideal for fast, dailysetup as a base station for small-to-medium-size jobsites. Since all your required hardware is incorporated into one housing, the SPS780 and SPS880 receivers are your best choice for rover applications. And because they offer Bluetooth standard in every receiver, you can eliminate the hassle of cables! Options that grow with your business - The SPS750 and SPS850 Modular GPS ReceiverS and SPS780 a BASIC OPTION Max option Extreme option Features/Benefits Rover or base station configuration An entry-level price point for lower cost of ownership Upgradeable to Max capability as your needs or site operations change 1.5 mile (2.4km) range (rover) Cable-free Bluetooth operation Recommended for: Small site development contractors and growing construction companies New users to construction GPS systems Site base station or rover solution, where the ability to change from a base to a rover is not needed Features/Benefits Base and rover interchangeable Unlimited range of operation Fast update rate for vehicle-mounted solution Rover operation within a VRS network Cable-free Bluetooth operation Recommended for: Large site and infrastructure project development contractors Existing GPS base station, rover or machine control users Equipment fleet flexibility Vehicle or pole-mounted operations Features/Benefits Base and rover interchangeable GPS Modernization, L2C and L5 GLONASS Unlimited range of operation Fast update rate for vehicle mounted solution Rover operation within a VRS network Cable-free Bluetooth operation Recommended for: Large site and infrastructure project development contractors Equipment fleet flexibility Vehicle or pole-mounted operation Long-term compatibility with GPS system improvements as they become available

7 GPS and RTK Advantages Global Positioning System (GPS) is a satellite positioning system designed and operated by the U.S. Department of Defense. GPS satellites broadcast radio signals with their position, precise timing and other information to GPS receivers on the ground. The GPS receiver uses the radio signals from several satellites to compute its exact location in three dimensions. Because it uses GPS satellite signals, the Trimble family of GPS receivers is well suited to work anywhere that has a clear line of sight to the sky. Real-Time Kinematic (RTK) GPS delivers centimeter level (0.03 ft) accuracy even when you re on the move making it well suited to on vehicle or machine operations. RTK GPS technology can provide accurate positions at long distances from the base station, so most construction sites are covered from a single daily setup location. nd SPS880 Smart GPS AntennaS Smart GPS Antenna versus Modular GPS Receiver The Smart GPS Antenna concept gives you everything you need in one single unit. The GPS antenna, GPS receiver, radio, radio antenna, and battery are assembled in one housing, eliminating the need for cables or external components. This receiver system allows fast daily setups as a base station, and is your ideal configuration for rover systems mounted on a rod or supervisor vehicle. The Modular GPS Receiver concept provides the flexibility to configure your receiver system differently each day. Security is a key concern on larger, long-term projects. The modular receiver lets you leave the receiver and radio in the site trailer secured, while only the antennas are on the roof of the trailer exposed to the environment. The modular receiver can be used as either a base station or a rover, giving the contractor total fleet flexibility.

8 SCS900 Site Controller Software Keep Work Moving and Profits Growing Trimble SCS900 Site Controller Software is designed for contractors carrying out measurement and stakeout for construction earthworks, landfill cells, waste disposal, and mining. Features include: Features/Benefits Total station or GPS positioning sensor capability. Real-time elevation plus cut / fill to the design anywhere on the jobsite. Real-time map development, surface modeling and in field contours. Stockpile and progress volume computations. Grade and laid material thickness checks. As-built measurements for record keeping and client approvals. Easy-to-use tools measure, stake out and check points, lines, alignments, planes and surfaces selectable from live maps on the graphical touch screen. Color and graphics enhance text prompts and data to quickly convey information to the user. A live 3D map, generated from any engineer s CAD system, allows the user to select and stake any point based or linear object on the jobsite. SCS900 uses familiar techniques such as the unique laser receiver-style light bar display to get you rapidly to grade. SCS900 eliminates errors and performing mental math by using Stakewriter software to simplify stakeout of any point, line, alignment, plane or surface model. Cut / Fill information is displayed as needed to write the stake. Easier-to-understand information and dedicated task-specific applications. Automated selection of operation parameters suited to the task eliminates the complexities associated with traditional survey systems. Helps you efficiently control and quantify site operations. Easy to learn and use for more users in your company increases equipment utilization and improves your return on investment. Work order system keeps all the related data for a task together over time, and provides an easy method to locate the measurements, reports and design information associated with a task. Site-based data management approach lets the system easily locate site information required to perform any task on a particular jobsite. Automated reports and data management track and control operations for multiple crews and multiple jobsites.

9 Your Choice of Controllers Trimble SCS900 Site Controller software runs on either the TCU or TSC2 controller, depending on your preferences. The Trimble TCU is a clip-on controller that can be used with the GPS receivers, but is ideally suited for the SPS700 total station. The TSC2 offers you a handheld controller for use with either the SPS700 total station or the SPS750/850 and SPS780/880 families of SPS receivers. Both control units offer integrated Bluetooth technology and optional integrated 2.4GHz radios for cable-free operation when working robotically with an SPS700 Total Station. Large hard disk storage, configured with either 64 MB or 128 MB of RAM, ultra-fast processors and support of external storage devices, such as two compact flash card slots on the TSC2 controller, means you ll never run out of storage space or processor speed when working with large data files.

10 Integrated Construction Close the Gap Between Site and Office Operations Data transfer between office and field crew is managed automatically by the SCS Data Manager. The SCS Data Manager lets you organize, manage and track all measurement and stakeout operations for multiple crews on multiple jobsites. You can preview work carried out in the field or review work order design data before delivery to a field crew. Maximize your productivity and your return on investment In the office SCS Data Manager gives the office supervisor the ability to: Organize new site information into Sites and Designs and then create new work orders and assign them to field crews. Keep all devices current with the latest data and report progress on tasks assigned by crew, site, priority, work status and due date. Easily transfer data to the controller for field operations. Let supervisors assign construction tolerances and settings for all processes. For inexperienced crews, this is especially helpful to ensure conformance, guarantee results, and track everything that happens on the jobsite.

11 In the Field On the jobsite, SCS900 Site Controller Software gives you the tools to perform the following tasks: Site measurement and checking. Jobsite GPS calibration and establishment of additional control points in suitable locations. Initial site measurements to verify design levels as you start the project. Daily, weekly, monthly measurements to determine progress or material stockpile volumes and apply shrink / swell factors for bulking. Measure the locations of surveyor s hubs so that they can easily be reinstated if lost. Finished surface grade checks to ensure material thickness and finished grade elevations and tolerances have been achieved. Measure laid utilities to record location of pipes and sewers before they are covered. As-built measurements upon project completion to submit for client approvals. Stakeout Points Stake building corners, structures, manhole locations or grids for grading operations. Lines Stake structure foundation lines, locations of sewers or utilities. Alignments Stake roads, parking lots or any other complex alignment element. Planes Stake out or check flat or sloping plane surfaces such as pads, sports fields or concrete structures. Surfaces Stake out or check grade over a real-time 3D surface model of the jobsite. Determine elevation, design elevation and cut / fill anywhere you need it. Back in the office Using Microsoft Excel, the SCS Report Utility instantly allows you to view Report and Record data from a work order. The Report Utility software also lets you: Open the work order record and report files directly from the SCS Data Manager. Filter the data quickly to show only the data types you want to analyze, such as stakeout and grade check. Use colors and filters to see out-oftolerance measurements or staking. Automatically generate dedicated, highquality report files for any field operation. For busy site managers or supervisors running multiple crews, the SCS Data Manager is your indispensable work management and progress reporting tool on the jobsite.

12 Productivity is... Design software that helps you prepare data for use on the construction job site. Grade control that is faster, more accurate and minimizes rework. Check site measurement and stakeout on the job site. Manage your assets to improve efficiency, safety, and theft recovery. Build with precise laser and positioning for faster layout, leveling and alignment. Productivity is the key to profitability...getting the job done faster with less machine time and personnel. Only one company can support your productivity with the broadest, deepest and most advanced construction solutions in the industry. Productivity is... Trimble. NORTH AMERICA Trimble 5475 Kellenburger Road Dayton, Ohio U.S.A (Toll Free) Phone Fax EUROPE Trimble GmbH Am Prime Parc Raunheim GERMANY Phone Fax LATIN AMERICA Trimble Navigation Limited 6505 Blue Lagoon Drive Suite 120 Miami, FL U.S.A Phone Fax AFRICA & MIDDLE EAST Trimble Export Middle-East P.O. Box 17760, Jebel Ali Free Zone, Dubai, U.A.E Phone Fax ASIA-PACIFIC Trimble Navigation Australia PTY Limited Level 1/120 Wickham Street Fortitude Valley, QLD 4006 AUSTRALIA Phone Fax YOUR LOCAL TRIMBLE OFFICE OR REPRESENTATIVE CHINA Trimble Beijing Room Tengda Plaza No. 168 Xiwai Street Haidian District, Beijing CHINA Phone Fax , Trimble Navigation Limited. All rights reserved. Trimble, theglobe & Triangle logo, and Terramodel are trademarks of Trimble Navigation Limited registered in the United States Patent and Trademark Office and other countries. Bluetooth is a trademark owned by Bluetooth SIG, Inc., USA and licensed to Trimble Navigation Limited. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Reorder PN B (01/06)