CHS Controls AB Tel , Fax Approach & Navigational Aids

Transcription

1 Section 3 CHS Controls AB Approach & Navigational Aids

2 Section 3 CHS Controls AB Approach & Navigational Aids Approach and navigational aids are designed to aid the pilot in visual landings. A combination of lights from PAPI to approach and threshold lights, allow the pilot to visually identify the runway and align the aircraft to the correct approach. The airfield operation requirements will dictate the sophistication and configuration of the approaching lighting system for each runway. Application Icons PAPI Runway End Flash System Rotating Beacon Approach Threshold and Approach Wind Cone Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.1

3 Section Approach Head & Navigational Aids CHS Controls AB PAPI Precision Approach Path Indicator Compliances: FAA AC 15/5345-2: L- and L-1 ICAO Annex 14 Applications The PAPI System provides the pilot a positive visual indication of the aircraft s position relative to the optimal glide slope during final approach to the runway. The L- PAPI system consists of four units in a line or bar, each unit having two or three 2 watt lamps. The PAPI unit produces a beam of light, the upper portion being white, the lower red. As the pilot s vertical position changes, the color of the light as seen by the pilot changes instantaneously. The Style A PAPI uses a Power and Control Unit (PCU) which has a photocell for automatic day/night intensity control. The PCU can be operated by using an L-54 radio controller signaled by an approaching aircraft. The Style B PAPI is powered by an L-2 constant current regulator. Style B does not include isolation transformers or connector kits, please order those separately. Features PAPI UNIT ETL Certified 1 Hour Lamps Meets ICAO Recommendations Sharp Signal Transition: less than 3 Minutes of Arc Precise Setting Tool: ±2 Minutes of Arc (not included with PAPI unit) Lamp Bypass Circuit (Style B) Tilt Switch Indicator Lights (Style B) POWER AND CONTROL UNIT(PCU) (Style A) Power Circuit Breaker Adjustable Power Supply to 265 VAC (not included w/papi Unit) 5 Hz or 6 Hz Operation Remote Control Override Ordering Information How to Order: Construct the basic catalog number based on the number of units per system and the power available. Add dash numbers for the temperature class and options. Style A includes the PCU. Above ground mounting hardware is included except 2 inch EMT for the legs. Order baseplates, transformer bases, and all other below ground items separately. Example: A2A-2 is an FAA L- system. It includes the PCU and tilt switches for voltage operation. A2B-2-11 is an ICAO PAPI system. It includes the EMT legs and it does not have tilt switches. A - Fixture Type: = 4 Units 1 = 2 Units Model: Lamps: 2 = 2 Lamps per Unit 3 = 3 Lamps per Unit Style: A = 22V to 24V B = 6.6A Temperature Class: 1 = 35 C 2 = 55 C Options: 11 = ICAO (No tilt switch, light unit legs included, -55 C operation) (see above example) 12 = Day operation enabled, night operation on/off interlocked with R/W circuit (Style A Only) 13 = Day & Night operation on/off interlocked with R/W circuit. (Style A Only) 16 = Protective lens cover 21 = Grounded Transformers For No Tilt Switch units only S55 = Stainless Steel Bracket for PAPI Mounting Leg Note: Order one clinometer (aiming device) 2522 separately. Indicator Lights: Internal D.C. Power Supply Operation Remote Control Status Tilt Switch Status Photocell Status EATON S CROUSE-HINDS BUSINESS

4 CHS Controls AB Installation Information Note: See Advisiory Circular AC15/ (latest revision) for complete siting informa- *15 ± 5 L-1 MAY BE REDUCED to 3 on NON JET RUNWAYS, General AVIATION Only PCU Runway 5 17 m PAPI Unit 25 ± 5 TYPICAL m L m L-, L Suggested PAPI System Layout *Non Jet Runways Direction of Approach Typical Wiring Diagram: FAA Style A Power & CONTROL Unit PAPI Unit PAPI Unit PAPI Unit PAPI Unit Incoming Power. 2-24V, 6 Hz OR 22V, 5 Hz 1 = Consolidating Harness (supplied) 2 = Outgoing Power Feed from Power & Control Unit - # AWG min (not supplied) 4 = Tilt Switch Leads - #14 AWG min (not supplied) Indicates Field WATERPROOF Customer Splice Typical Wiring Diagram: FAA Style B (2-Lamps) / (3-Lamps) Indicates Secondary Plug PAPI Unit (Master) PAPI Unit (Slave) PAPI Unit (Slave) PAPI Unit (Slave) Indicates Secondary Receptacle Indicates Primary Plug 2-lamps Incoming Power. 6.6 AMPS CONSTANT Current Indicates Field WATERPROOF Customer Splice Indicates Primary Receptacle Indicates Primary Plug 3-lamps = 3W, Isolation Transformer (not supplied) 2 = 2W, Isolation Transformer (not supplied) 3 = Consolidating Harness (supplied) 4 = Power Leads with L-23 Connectors - Kit (not supplied) (L-23 Connector Kits supplied) 5 = Tilt Switch Leads #14 AWG min (not supplied) 6 = 1W, 6.6/6.6A Isolation Transformer (not supplied) Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.3

5 PAPI System Isolation Transformer and Connector Kit Usage Quantity CHS Controls AB PAPI System Part Number 1W 6.6/6.6A PN: TA166D-1 2W 6.6/6.6A PN: TA266D-1 3W 6.6/6.6A PN: TA366D-1 2W 6.6/6.6A PN: TA GRS 3W 6.6/6.6A PN: TA GRS L-23 Connector Kit- AWG PN: 54-D4-D4 1A2B-1 OR A2B-X -11 OR A2B-X A2B-1 OR A2B-X -11 OR -2 4 A2B-X A3B3-1 OR A3B-X -11 OR A3B-X A3B-1 OR A3B-X -11 OR -2 4 Note: This table pertains to 6.6A circuits only, Consult factory for 2A requirements Outline Drawings Power & Control Unit (PCU) (Style A System Only) SIDE VIEW Photoelectric CONTROL HASP FOR REMOVABLE TOP COVER PAPI Light Unit SIDE VIEW 37.7 (957) 7.9 (2) LIGHT OUTPUT LIGHT UNIT WITH 2 WATT LAMPS FLEXIBLE LIQUID-TIGHT CONDUIT & WIRING (INCLUDED) 2 INCH EMT (NOT SUPPLIED) FRANGIBLE BASEPLATE (ORDER SEPARATELY) FRANGIBLE COUPLING FLOOR FLANGE 2564 Power CONDUIT (2) 2 INCH EMT (not supplied) Support Leg (2) 2 INCH EMT (not supplied) PLUG & WIRE (9.5 FOOT LENGTH) CONSOLIDATING HARNESS (STYLE B SHOWN) CONCRETE PAD FRANGIble Coupling Floor Flange L-67 BASE 16 or 24 DEEP (ORDER SEPARATELY) PCU Footing Plan Note: L-67 Base may be located anywhere within reach of the cable assembly. PAPI Unit Footing Plan 2.75 (7) CONDUIT Elbow 2 (not supplied) Floor Flange E 7. (17) 6 Outside Diameter 4 Holes.625 (15.9) Diameter Equally spaced on a 4.75 (12) Bolt Circle Note: PCU mounting height is not specified. It is recommended to minimize the mounting height. The PCU may be wall mounted. D 6. (172) 16. (46) 12 (35) Baseplate with 2 Hub Mounted on L-67B Light Base (order separately) L-67 Base 16 or 24 DEEP (order separately) C Floor Flange B A 6 (152) Outside Diameter 4 Holes.625 (15.9) Diameter Equally spaced on a 4.75 (12) Bolt Circle Note: L-67 Base may be located anywhere within reach of the cable assembly. 3.4 EATON S CROUSE-HINDS BUSINESS

6 CHS Controls AB Footing Dimensions Chart Inches (Millimeters) A B. C D E PAPI Light Unit 2-Lamp (4) (654) 7.9 (2) PAPI Light Unit 3-Lamp 22.5 (572) (654) (26) PCU for 3A Systems 1. (457) 5.5 (14) All other PCU s 1. (254) 1.5 (3) Dimensions: Instruction Manual: Inches (mm) 243 (2-Lamp) 2439 (3-Lamp) Light Unit (2)* Light Unit (2)* PCU Shipping Weight: 75 lbs.. 1 lbs.. 15 lbs.. 34 kg. 45 kg. 4 kg. Shipping Volume: 9.3 cu. ft. 12 cu. ft. 3.7 cu. ft..26 cu. m..34 cu. m..1 cu. m. *Each Unit Accessories 3-Lamp Light Unit Catalog Shipping Weight Shipping Volume Description Number lb. kg. cu. ft. cu. m. Base L-67, class I, 24 deep 21242Q Clinometer 2522 Baseplate, 2 Hub AP Tilt Level 2557 Renewal Parts Description Part Number Description Part Number PAPI UNIT Power Entry-Frangible Coupling (1 per Unit) Leg-Frangible Coupling (3 per Unit) Connector Kit L-23, AWG,.32 to.43 O.D. 54 Super-D4-D4 Consolidating Harness Style A Consolidating Harness Style B - FAA (2-Lamp) Consolidating Harness Style B - FAA (3-Lamp) Consolidating Harness Style B - ICAO Floor Flange (3 per Unit) Lamp 2W (replaces 2531) Lamp Socket 4749 Plug 4-Pin with 4-Conductor wire Red Filter 2769 Tilt Switch (Class 1) Tilt Switch (Class 2, Style A) Tilt Switch (Class 2, Style B) Tilt Switch Control Board (2-Lamp) Tilt Switch Control Board (3-Lamp) Tilt Switch Control Board (3-Lamp) Isolation Transformer See Transformer Section PCU Floor Flange (2 per PCU) Frangible Coupling (4 per PCU) Fuse F Fuse F Lightning Arrestor Photocell Assembly 2745 SPARE PAPI UNITS: (Without Harness & Mounting Hardware)* 2-Lamp 3-Lamp Style A, Class Style A, Class Style A, Option Style B, Class 1 (Master) Power & Control Unit (PCU) PC Board Standard with no Options Power & Control Unit (PCU) PC Board with Options Relay K1,K Transformer See Transformer Section 2-Lamp 3-Lamp Style B, Class 1 (Slave) Style B, Class 2 (Master) Style B, Class 2 (Slave) Style B, Option * For complete 2-Lamp units, order * For complete 3-Lamp units, order Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.5

7 Approach & Navigational Aids CHS Controls AB PAPI-LED Precision Approach Path Indicator Compliances: FAA-E-37AC AC15/5345-2G (Draft) ICAO Annex 14 Applications The PAPI System provides the pilot a positive visual indication of the aircraft s position relative to the optimal glide slope during final approach to the runway. The L- PAPI system consists of four units in a line or bar and L1 PAPI consists of two units in a line or bar. The PAPI unit produces a beam of light, the upper portion being white, the lower red. As the pilot s vertical position changes, the color of the light as seen by the pilot changes instantaneously. Features Unique Optical Design Improved light efficiency and battery running time Compact Lightweight & Rugged Construction Ensuring versatility and portability A PAPI (2 box) or Full PAPI (4 box) systems available in manual & secure radio control options provides system flexibility for various deployments Powered from portable PAPI battery packs or alternative sources (generator, solar, wind or fuel cell etc) Flexible power input options Adjustable Intensity Settings 3 Intensity adjustments and custom settings to meet multiple ICAO and FAA requirements Semi permanent fixings aluminium fixing plates for secure fixing to the ground (optional) Transition Better than 3 mins of arc LED Life Expectancy >5,hrs Lens Accuracy Better than 4 mins of arc between the Red & White 1m & better than.1 mins of 1km Function Manual or Radio Control (Optional) Wireless Radio Receiver, 2.4 GHz Network + 12 bit Encryption Ordering Information Fixture Type: = 4 Box 1 = 2 Box Input Style 1 : A = 24VDC B = 2-24V Technology: 5 = Pro V LED Series Optics: VS = Visible VR = Infrared Photometrics: F1 = FAA I2 = ICAO Temperature: 35C = 35 C 55C = 55 C Control Interface: RF = Radio Frequency HW = Hardwire Options: = No Options 1 = Protective Cover 2 = Yellow Exterior 3 = Stainless Steel - 5 Note: 1. Input Style The Style A PAPI uses a Power and Control Unit (PCU) which has a photocell for automatic day/night intensity control. The PCU can be operated by using an L-54 radio controller signaled ay an approaching aircraft. The Style B PAPI is powered by an L-2 constant current regulator. Operating Temperature -4 C - +6 C Circuit Protection Integrated Charging Time of Battery Packs (Mains) hrs* IP Rating IP65, IP EATON S CROUSE-HINDS BUSINESS

8 CHS Controls AB Outline Drawings Power & Control Unit (PCU) (Style A System Only) SIDE VIEW PAPI Light Unit SIDE VIEW 37.7 (957) Photoelectric CONTROL HASP FOR REMOVABLE TOP COVER 7.9 (2) LIGHT OUTPUT LIGHT UNIT WITH 2 WATT LAMPS FLEXIBLE LIQUID-TIGHT CONDUIT & WIRING (INCLUDED) 2 INCH EMT (NOT SUPPLIED) BREAKABLE COUPLING Frangible BASEPLATE (ORDER SEPARATELY) FRANGIBLE COUPLING FLOOR FLANGE 2564 Power CONDUIT (2) 2 INCH EMT (not supplied) Support Leg (2) 2 INCH EMT (not supplied) PLUG & WIRE (9.5 FOOT LENGTH) CONSOLIDATING HARNESS (STYLE B SHOWN) CONCRETE PAD FRANGIble Coupling Floor Flange L-67 BASE 16 or 24 DEEP (ORDER SEPARATELY) Note: L-67 Base may be located anywhere within reach of the cable assembly. PCU Footing Plan PAPI Unit Footing Plan 2.75 (7) CONDUIT Elbow 2 (not supplied) Floor Flange E 7. (17) 6 Outside Diameter 4 Holes.625 (15.9) Diameter Equally spaced on a 4.75 (12) Bolt Circle Note: PCU mounting height is not specified. It is recommended to minimize the mounting height. The PCU may be wall mounted. D 6. (172) 16. (46) 12 (35) Baseplate with 2 Hub Mounted on L-67B Light Base (order separately) L-67 Base 16 or 24 DEEP (order separately) C Floor Flange B A 6 (152) Outside Diameter 4 Holes.625 (15.9) Diameter Equally spaced on a 4.75 (12) Bolt Circle Note: L-67 Base may be located anywhere within reach of the cable assembly. Footing Dimensions Chart Inches (Millimeters) A B. C D E PAPI Light Unit 2-Lamp (4) (654) 7.9 (2) PAPI Light Unit 3-Lamp 22.5 (572) (654) (26) PCU for 3A Systems 1. (457) 5.5 (14) All other PCU s 1. (254) 1.5 (3) Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.7

9 CHS Controls AB Accessories Catalog Shipping Weight Shipping Volume Description Number lb. kg. cu. ft. cu. m. Base L-67, class I, 24 deep 21242Q Baseplate, 2 Hub AP Clinometer/Tilt Level 2522 Renewal Parts Description Part Number Description Part Number PAPI UNIT Frangible Coupling (1 per unit) Frangible Coupling (3 per Unit) Connector Kit L-23, AWG,.32 to.43 O.D. 23KP-D4-D4 Consolidating Harness Style A Consolidating Harness Style B - FAA (2-Lamp) Consolidating Harness Style B - FAA (3-Lamp) Consolidating Harness Style B - ICAO Floor Flange (3 per Unit) Inclinometer Isolation Transformer 1W (Style B 2 & 3 lamp master) 334 Isolation Transformer 2W (Style B Slave) 336 Isolation Transformer 3W (Style B 2 & 3 lamp master) 331 PCU Floor Flange (2 per PCU) Frangible Coupling (4 per PCU) Fuse F Fuse F Lightning Arrestor Photocell Assembly 2745 Power & Control Unit (PCU) PC Board Standard with no Options P-253 LED Cassette-Red P-253 LED Cassette-White P-253 LED Power Board P-253 LED Control Board Plug 4-Pin with 4-Conductor wire Red Filter 2769 Tilt Switch (Class 1) Tilt Switch (Class 2, Style A) Tilt Switch (Class 2, Style B) Tilt Switch Control Board (2-Lamp) Tilt Switch Control Board (3-Lamp) Tilt Switch Control Board (3-Lamp) Transformer T Power & Control Unit (PCU) PC Board with Options Relay K1,K Transformer T1, 1VA 273 Transformer T1, 2VA 2712 Transformer T1, 9VA EATON S CROUSE-HINDS BUSINESS

10 Approach & Navigational Aids CHS Controls AB REIL Runway End Identifier Lights Compliances: FAA/AC 15/ ; L-49 A,B,E,F ICAO Annex 14 Applications The primary application of a REIL system is to positively identify the end or the threshold of a visual or instrument nonprecision runway. This REIL system consists of two synchronized flashing lights. One flasher unit is located at each side of the runway threshold. Features ETL Certified CSA Certified Easy to install each REIL unit consists of a flash head and a control box, mounted on the same support leg(s). Easy to maintain special tools are not required. Does not require separate control cabinet REIL Master Unit with integral system control. Elapsed time meter Safety interlock in each control box and flash head. Weather resistant painted parts are coated with U.V. resistant paint, electrostatically applied Note: Each current (series circuit) operated REIL must be powered by a dedicated 4kW (minimum) constant current Ordering Information How to Order: To the Basic Catalog Number, add the symbols for FAA Style and Input Power, as shown below. Add Option numbers as required. F T S Fixture Type: Beam Orientation: 4 = Omni Directional (FAA Style B,F) = Uni Directional (FAA Style A,E) Input Type: 1 = Voltage operated with internal (SC 415) controller** 3 = Current (series) operated*** Voltage* (Input Type 1 Only): 24 = 24 V. 6 Hz 23 = 23 V. 5 Hz * For optional 12 V, 6 Hz consult factory ** For optional current sensing control of the voltage operated REIL, also order FTC-435 Controller and (1) 3/45W isolation transformer *** For current operation two 3W isolation transformers and connector kit are required. FTS SERIES products are manufactured by Flash Technology, Franklin, TN. Technical Data Instruction Manua: FTS 4/ FTS 43/3 Primary Power: Voltage Unit, 24VAC +1% 6Hz / 23VAC +1% 5Hz, 1 Phase Current Unit, Direct connect to secondary of standard FAA type L3 Isolating Transformer: 12 Watts (High) 5 Watts (Med) 65 Watts (Low) 3 Volt Amperes (High Intensity) Effective Intensity: Style A, E = 2,, 2, 45 effective candelas. Style B, F = 3 ± 5%, 1,5 ± 5% and 5, ± 5% effective candelas Flash Rate: 6 Flashes per minute (4) 12 Flashes per minute () Beam Pattern: Omnidirectional coverage: 36 degrees horizontal, degrees vertical Unidirectional coverage: 3 degrees horizontal, 1 degrees vertical Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.9

11 CHS Controls AB Outline Drawings FTS Series Co-Mounted Uni Directional Dimensions: Inches (mm) FTS 4 Series Co-Mounted Omni Directional Renewal Parts Description Part Number Description Part Number Clamp, Lens (FH4) RC Network RC11 (FH4 & FH) Flash Tube FT 11 (FH4) 34329* Retaining Bezel (FH) Flash Tube FT 11 (FH) 4917* Spacer, Ceramic (FH4) 5944 Lens (FH4) Terminal Screw Lug (FH4) Post, Ceramic (FH) 5942 Trigger Transformer (FH4 & FH) 221 Shipping Weights and Volumes Shipping Weight Shipping Volume REIL Catalog Number lb. kg. cu. ft. cu. m. FTS 4 Series FTS Series EATON S CROUSE-HINDS BUSINESS

12 Approach & Navigational Aids CHS Controls AB REIL - LED Runway End Identifier Lights Compliances: FAA/AC 15/ (Current Edition) FAA EB 67 Applications The primary application of a REIL- LED system is to positively identify the end or the threshold of a visual or instrument non-precision runway. This REIL-LED system consists of two synchronized flashing lights. One flasher unit is located at each side of the runway threshold. Features Low Power Draw - entire system draws less than 4 Watts Nominal intensity - 22, effective candelas Beam Coverage - 1 vertically, 3 horizontally Flash rate: two flashes per second Separation: Control unit can be mounted in excess of 5 feet from flash head Remote Control: Four-position selector switch or Series Lighting Circuit current sensing Meets photometric beam requirements for MALSR, SSALR, and ALSF-I / II Voltage-powered - 12 VAC, 5 Hz or 6 Hz - 23 VAC, 5Hz - 24 VAC, 5Hz or 6 Hz Current-powered (Certification pending) - 2. to 6.6 amperes - No power adapter required - True RMS current sensing - Operates from L3-4 Ordering Information How to Order: To the Basic Catalog Number, add the symbols for FAA Style and Input Power, as shown below. Add Option numbers as required. Fixture Type: 49 = L-49 REIL-LED Voltage: 12 = 12 V, 5 Hz 121 = 2 V. 6 Hz 23 = 23 V. 5 Hz 24 = 24 V. 5 Hz 241 = 24 V. 6 Hz Options: 1 = Flash monitoring 2 = Elasped time meter 3 = Internal heater kit 4 = Error code LED display REIL-LED is manufactured by Airport Lighting Company, Manlius, NY Photometric Data: Physical Specifications: SAL-13 dimensions: Head and Junction Box: H x W x 5.5 D Weight (Head & Junction Box): 32lbs. Master Control Unit: 6.5 H x 13.5 W x 12 D Weight (MCU): 1.5lbs. System Ship Weight: 74.5lbs Model Style Type FPM Effective Intensity High Medium Low SAL 13 A L-49V, I 12 SAL 13 C L-49V, I 12 7 SAL 13 E L-49V, I 12 22, 15 Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.11

13 Approach & Navigational Aids CHS Controls AB ALSF Flasher System Compliances: FAA AC 15/ SSALR (Type I) ICAO ANNEX 14 Applications Precision approach to runway in visibility conditions where the runway visual range (RVR), is less than one-half mile requiring steady-burning approach lights with sequence flashing lights. The system consists of a master controller for monitoring and individual flashing lights that can be incorporated with steady burning lights to create various types of approach light systems such as the classic 21-position ALSF-1 or ALSF-2. Flashhead and power converter may be mounted as one unit or individually to meet local terrain needs. Inset (surface mount) flashers are also available. Other parts of the system, such as steady burning lights, towers, light bases, transformers and regulators must be ordered separately. Features ETL Tested and Verified Real-time dynamic fault detection and isolation Elapsed time metering (user-setable alarms) Standard input voltages 6 Hz 12 V, 24 V, 5 Hz-23 V Micro-processor control Transient protection Monitoring and dimming capability Local and remote control operation High-intensity default and failure detection, and caution indication NEMA 4 outdoor cabinet with Ordering Information Fixture Type: Input Power: 1 = Voltage operated with internal controller 3 = Current (series) operated Flashing Lights: Insert Number of Flashers Needed (3 Maximum) F T S - - Input Power: 12 = 12 V. 6 Hz 24 = 24 V. 6 Hz 23 = 23 V. 5 Hz FTS SERIES products are manufactured by Flash Technology, Franklin, TN. locking provisions -55 C to +55 C operation Remote tower and vault control panels available Computer-control compatible (dry contacts) 12 Flashes per minute (factory calibrated) LED display FTC13 25 Watts, Average power consumpiton Can be installed up to 25 from the approach system Current operated unit uses 3W transformer (not supplied) * 3.12 EATON S CROUSE-HINDS BUSINESS

14 CHS Controls AB Outline Drawings FRONT VIEW 19(42.6) 4.5(114.3) 1.(254) 4.5(114.3) Ø.44(11.1) Ø.44(11.1) Ø.5(12.7) 17.(447.5) 16.(46.4) 1.(47) Ø.44(11.1) Ø.44(11.1) 25.9(65) Dimensions: Inches (mm) Instruction Manual: FTC 13 / FTC 435 Master Flasher Timer Power Supply Shipping Weight: 29lbs.. 25 lbs.. 13 kg kg. Ø.75 (19) Ø.75 (19) Ø1.6 (26.99) Ø.75 (19) 6. (153) BOTTOM VIEW Standard Sequence Flasher System Components Item Part Number Fuse, Power, MDL2A PCB1 Control Board VRI Varistor 12 V Relay, Alarm 4951 PCB2 Panel Board Renewal Parts Description Part Number Description Part Number Clamp, Lens (FH4) RC Network RC11 (FH4 & FH) Flash Tube FT 11 (FH4) 34329* Retaining Bezel (FH) Flash Tube FT 11 (FH) 4917* Spacer, Ceramic (FH4) 5944 Lens (FH4) Terminal Screw Lug (FH4) Post, Ceramic (FH) 5942 Trigger Transformer (FH4 & FH) Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.13

15 Approach & Navigational Aids CHS Controls AB ARB Airport Rotating Beacon Compliances: FAA AC 15/ (Current Edition) ICAO Annex 14, part Applications The Airport Rotating Beacon is used primarily for night operations at airports as an identification and location marker. The dual-light beacon (clear and aviation green lenses) features 15-watt pulsestart lamps and a patented design that makes it maintenance free, except for lamp replacement. Features ETL Certified FAA Approved: L-1 4W A patented belt-drive system eliminates the lubrication required by conventional gear-drive beacons. (U.S. Pat. 5,339,224) A patented liquid-filled lamp connector eliminates the slip rings and brushes found on conventional beacons. (U.S. Pat. 5,16,67) Two 14,-lumen, 15-watt pulse-start metal-halide lamps Typical lamp life is 12, hours (3 years) One clear lens, one aviation green lens NO maintenance except lamp replacement All moving parts are permanently lubricated Impedance-protected motor eliminates burnouts Lamps preset 5 degrees above horizontal, adjustable 12 RPM rotation, 24 flashes/minute Weatherproof steel cabinet, powder-coated international orange Tested to wind velocities of 1 mph Ordering Information Fixture Type: L1 = L-1 Medium Intensity Application: A1 = Airport: White/Green Class: 1 = -35 C 2 = -55 C* Power: 16 = 12V, 6Hz 25 = 22-24V, 5Hz 26 = 22-24V, 6Hz Options: T HBM 12 = Tell-Tale Relay, 12V T HBM 24 = Tell-Tale Relay, 22-24V 42- = Tower Mounting Kit 42-2 = REA Pole Mounting Kit * All Class 2 ARB s require the T HBM option ARB products are manufactured by HALI-BRITE INC. Crosby, MN Optional photocell and/or tell-tale relay Power consumption: 395W Class I, 795W Class II Manufactured in the USA L 1 - A Dimensions: Inches (mm) Shipping Weight: 1 lbs. 5 kg. Shipping Volume: 4 x 25 x EATON S CROUSE-HINDS BUSINESS

16 CHS Controls AB Outline Drawings Renewal Parts Description Part Number Description Part Number Ballast Assembly, 6Hz 2-23 Ballast Assembly, 5Hz 2-24 Belt 6-3 Motor Fuse, 1/2 amp 23-2 Lamp Fuse, 6.25 amp 23-1 Clear Lens 2-6 Green Lens 2-43 Amber Lens 2-25 Lens Clip Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.15

17 Approach & Navigational Aids CHS Controls AB ARB Airport Rotating Beacon Compliances: FAA AC 15/ (Current Edition) ICAO Annex 14, part Applications The Airport Rotating Beacon is used primarily for night operations at airports as an identification and location marker. With two 4W pulse start lamps, the dual-light beacon (clear and aviation green lenses) features a patented design that makes it maintenance free, except for lamp replacement. Features ETL Certified FAA Approved: L-2A A patented belt-drive system eliminates the lubrication required by conventional gear-drive beacons. (U.S. Pat. 5,339,224) A patented liquid-filled lamp connector eliminates the slip rings and brushes found on conventional beacons. (U.S. Pat. 5,16,67) Two 4,-lumen, 4-watt pulse-start metal-halide lamps Typical lamp life is 15, hours (2-3 years) One clear lens, one aviation green lens NO maintenance except lamp replacement All moving parts are permanently lubricated Thermally-protected motor eliminates burnouts Lamps preset 5 degrees above horizontal, adjustable 12 RPM rotation, 24 flashes/minute Weatherproof steel cabinet, powder-coated international orange Tested to wind velocities of 1 mph Ordering Information Fixture Type: L2 = L-2 High Intensity Application: A6 = Airport: White/Green Class: 1 = -35 C 2 = -55 C* Power: 16 = 12V, 6Hz 25 = 22-24V, 5Hz 26 = 22-24V, 6Hz Options: T HBM 12 = Tell-Tale Relay, 12V T HBM 24 = Tell-Tale Relay, 22-24V 42- = Tower Mounting Kit 42-2 = REA Pole Mounting Kit * All Class 2 ARB s require the T HBM option ARB products are manufactured by HALI-BRITE INC. Crosby, MN Optional photocell and/or tell-tale relay Power consumption: 995W Class I, 395W Class II Manufactured in the USA L 2 - A Dimensions: Inches (mm) Shipping Weight: 11 lbs. 5 kg. Shipping Volume: 4 x 25 x EATON S CROUSE-HINDS BUSINESS

18 CHS Controls AB Outline Drawings Renewal Parts Description Part Number Description Part Number Ballast Assembly, 6Hz 2-13 Ballast Assembly, 5Hz 2-16 Belt 6-3 Motor Fuse, 1/2 amp 23-2 Lamp Fuse, 1 amp 23-3 Lamp, 4 Watt 34-4/H75/PS Clear Lens 2-6 Green Lens 2-43 Amber Lens 2-25 Lens Clip Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.17

19 Approach & Navigational Aids CHS Controls AB HRB Heliport Rotating Beacon Compliances: ICAO Annex 14, part Applications The Heliport Rotating Beacon is used primarily for night operations at heliports as an identification and location marker. With three lamps, the trilight beacon features clear, yellow and green lens. Features A patented belt-drive system eliminates the lubrication required by conventional gear-drive beacons. (U.S. Pat. 5,339,224) A patented liquid-filled lamp connector eliminates the slip rings and brushes found on conventional beacons. (U.S. Pat. 5,16,67) Three 14,-lumen, 15-wattmetal-halide lamps Typical lamp life is 12, hours (2 years) One clear lens, one aviation green lens and one yellow lens NO maintenance except lamp replacement All moving parts are permanently lubricated Impedance-protected motor eliminates burnouts Lamps preset 5 degrees above horizontal, adjustable 12 RPM rotation, 36 flashes/minute Weatherproof steel cabinet, powder-coated international orange Class I temperature range: -3 to +55 C (-22 to +131 F) Class II temperature range: -55 to +55 C (-67 to +131 F) Tested to wind velocities of 1 mph Ordering Information Fixture Type: L1 = L-1 Medium Intensity L2 = L-2 High Intensity Application: H7 = White/Green/Yellow Class: 1 = -35 C 2 = -55 C* Power: 16 = 12V, 6Hz 25 = 22-24V, 5Hz 26 = 22-24V, 6Hz Options: H = Hospital Heliport T HBM 12 = Tell-Tale Relay, 12V T HBM 24 = Tell-Tale Relay, 22-24V 42- = Tower Mounting Kit 42-2 = REA Pole Mounting Kit HRB products are manufactured by HALI-BRITE INC. Crosby, MN Optional photocell and/or tell-tale relay Power consumption: 595W Class I, 995W Class II Manufactured in the USA L - H Dimensions: Inches (mm) Shipping Weight: 124 lbs. 56 kg. Shipping Volume: 4 x 25 x EATON S CROUSE-HINDS BUSINESS

20 CHS Controls AB Outline Drawings Renewal Parts Description Part Number Description Part Number Ballast Assembly, 12/24 VAC, 6Hz 2-7 Belt 6-3 Motor Fuse, 1/2 amp 23-2 Lamp Fuse, amp Lamp, 15 Watt B Clear Lens 2-6 Green Lens 2-43 Amber Lens 2-25 Red Lens 2-1 Lens Clip Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.19

21 Approach & Navigational Aids CHS Controls AB EAL Elevated Approach Light Compliances: FAA Specification FAA-E-92* ICAO Annex 14 CSA Certified Applications The EAL is a unidirectional elevated light which may be used as a clear or red approach light, a red end of runway light, and a green threshold light. For more information, refer to the Application/Fixture Selection Table on page Features Meets FAA photometric requirements, using standard PAR 56 lamps, as specified in FAA-E-92 document. Suitable for replacement of MB-2 MILSPEC MIL-L-2699 lights per U.S. Air Force AFR -14. Easy to install - mounts on a standard 2 EMT (5mm pipe) and a frangible coupling or approach mast mounted. Sturdy filter clips - resist high winds and jet blasts. Cast aluminum housing. Easy to relamp - special tools are not required. Easy to aim - uses precise aiming device** with digital readout. Shipped fully assembled. Ordering Information How to Order: To the basic catalog number, add the symbols for Color, Lamp type, Cable Assembly and Options (if any). A frangible coupling may be required for proper mounting and must be ordered separately. Examples: 924-C-2 is a clear approach light with a 2 watt lamp, less cable. 924-G-3-2 is a green threshold light with a 3 watt lamp and 6.5 (2m) long 2 amp cable. Fixture Type Light Color: C = Clear (No Filter or Clips) R = Red, Absorption Filter with Clips G = Green, Absorption Filter with Clips DR = Red, Dichroic Filter with Clips DG = Green, Dichroic Filter with Clips Lamp Type: 2 = 2 Watts, 6.6 Amp, PAR-56 3 = 3 Watts, 2 Amp, PAR-56 No symbol means no lamp is included Cable Assembly: 2 = 6.5 Feet (2 meters) Long Cable, 2 Amp Rated, with L-23 Plug No symbol means a cable is not included Options: 1 = Mounting Kit (consist of Frangible Coupling and 253 Cable Clamp Assembly). 11 = Ground Wire 12 = External 6.6 Amp Cable 14 = Mounting Kit, fixture to baseplate * With Exception of the Weight. ** Order 5133 aiming device separately (one per facility). 3.2 EATON S CROUSE-HINDS BUSINESS

22 CHS Controls AB Photometric Data 2, CD MINIMUM 1, CD MINIMUM 1, CD MINIMUM 2, CD AVERAGE (ACTUAL AVERAGE - 22,3 CD SHOWN) 25 CD MINIMUM 5 CD MINIMUM 2,5 CD MINIMUM 5, CD AVERAGE (ACTUAL AVERAGE - 5,33 CD SHOWN) , CD 1, CD 15, CD 2, CD 16 5 CD 2,5 CD 5, CD APPROACH CENTERLINE & CROSS BAR WHITE LIGHT - 2 WATTS (ICAO FIGURE 2.1) CD = Candelas in white light CD = Candelas in red light APPROACH SIDE ROW RED LIGHT - 2 WATTS (ICAO FIGURE 2.2) 5 CD MINIMUM 1, CD MINIMUM 5, CD MINIMUM 1, CD AVERAGE (ACTUAL AVERAGE - 17,91 CD SHOWN) 5 CD MINIMUM 1, CD MINIMUM 5, CD MINIMUM 1, CD AVERAGE (ACTUAL AVERAGE - 17,6 CD SHOWN) , CD 16 5, CD 1, CD 15, CD 16 2,5 CD 5, CD 1, CD 2, CD CD = Candelas in green light THRESHOLD GREEN LIGHT - 2 WATTS (ICAO FIGURE 2.3) CD = Candelas in green light THRESHOLD WING BAR GREEN LIGHT - 2 WATTS (ICAO FIGURE 2.4) 125 CD MINIMUM 25 CD MINIMUM 1,25 CD MINUMUM 2,5 CD AVERAGE (ACTUAL AVERAGE - 5,54 CD SHOWN) 12 1,25 CD 4 2,5 CD 5, CD CD = Candelas in red light RUNWAY END RED LIGHT - 2 WATTS (ICAO FIGURE 2.) Application/Fixture Selection Table Application Compliances Catalog Number White, Approach Centerline and Cross Bar Light ICAO, USAF/NAVY, NATO, FAA 924-C C Red, Approach Side Row Light ICAO, USAF/NAVY, NATO, FAA 924-DR-2-66 Green, Runway Threshold and Wing Bar Light ICAO, USAF/NAVY, NATO, FAA 924-DG-2-66 Red, Runway End Light ICAO, USAF/NAVY, NATO, FAA 924-R Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.21

23 CHS Controls AB Outline Drawing HOUSING ASSY CAPTIVE SCREW PAR-56 SOCKET LENS LAMP Instruction Manual: 971 Shipping Weight: 934-C 924-R 5.5 lbs.. 7. lbs kg. 3.2 kg. Shipping Volume :.7 cu. ft..7 cu. ft.2 cu. m.2 cu. m LAMP BOLT, SLIPFITTER SLIPFITTER CLAMP LEAD ASSEMBLY Accessories Catalog Shipping Weight Shipping Volume Description Number lb. kg. cu. ft. cu. m. Aiming Device 5133 Base L-67B, Class I, 24 Deep AC21242H Base L-67D, Class I, 24 Deep AC63242H Baseplate, 2 Hub, 12 Diameter AP Baseplate, 2 Hub, 16 Diameter AP Frangible Coupling with Compression Fitting Connector Kit L-23, 6 AWG,.32 to.43 O.D. 23KP-D3-D3 Connector Kit L-23, AWG,.32 to.43 O.D. 54 Super-D4-D4 Heat Shrink Kit (1-piece) Heat Shrink Kit (2-piece) Transformer See Transformer Section Renewal Parts Description Part Number Description Part Number #6-32 Captive Screw Bolt, Slipfitter 1A1-25D32 Filter, Absorption Green ML4266 Filter, Absorption Red ML4265 Filter, Dichroic Green 4136-G* Filter, Dichroic Red 4136-R* Housing Assembly Lamp Clamp (with Filter) Lamp Clamp (without Filter) Lamp, PAR-56, 2 watts, 6.6A 4941 Lamp, PAR-56, 3 watts, 2A Lead Assy., 2A, 6.5 (2m) Long 5135 Lead Assy., 6.6A, 6.5 (2m) Long 5136 PAR-56 Socket 5252 Slipfitter (Less Bolts) 516 * Should be used with 2W fixtures EATON S CROUSE-HINDS BUSINESS

24 Approach & Navigational Aids CHS Controls AB EALK Elevated Approach Light/PK-3 Type Compliances: ICAO Annex 14 CSA Certified Applications The EALK is a unidirectional elevated light which may be used as a clear or red approach light, a red end of runway light, and a green threshold light. Features Suitable for replacement of MB-2 lights per U.S. Air Force AFR -14. Uses PK-3d low power consumption lamps. Easy to install - mounts on a standard 2 (5mm) pipe and a frangible coupling or approach mast mounted. Easy to relamp - special tools are not required. Cast aluminum housing. Easy to aim - uses precise aiming device* with digital readout. Sealed colored lens - eliminates need for filter and clips. Shipped fully assembled. Ordering Information How to Order: To the basic catalog number, add the symbols for Color, Lamp type, Cable Assembly and Options (if any). A frangible coupling may be required for proper mounting and must be ordered separately. Examples: 925-C-2 is a clear approach light with a 2 watt lamp. 925-G-2-66 is a green threshold light with a 2 watt lamp and 6.5 (2m) long 6.6 amp cable. Fixture Type: Light Color: C = Clear Lens R = Red Lens G = Green Lens Lamp Type: 1 = 1 Watts, 6.6 Amp, PK3d 15 = 15 Watts, 6.6 Amp, PK3d 2 = 2 Watts, 6.6 Amp, PK3d No symbol means no lamp is included Cable Assembly: 66 = 6.5 Feet (2 Meters) Long Cable, 6.6 Amp Rated with L-23 Plug No symbol means a cable is not included Options: 1 = Mounting Kit (Consist of Frangible Coupling and 253 Cable Clamp Assembly). 11 = Ground Wire 12 = External 6.6 Amp Cable 13 = Lamp Bypass Assembly (6.6A) 14 = Mounting Kit, fixture to baseplate S54 = ICAO, Body of fixture is painted yellow * Order 5133 aiming device separately (one per facility). Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.23

25 CHS Controls AB Photometric Data 2 CD MIN. 1 CD MIN. 1, CD MIN. 2, CD AVG. (Actual Average 22,377 CD Shown) 25 CD MIN. 5 CD MIN. 25 CD MIN. 5 CD AVG. (Actual Average 9,91 CD Shown) , CD 5, CD 1, CD 15, CD 2, CD CD 5 CD 2,5 CD 5, CD 7,5 CD 1,5 CD APPROACH CENTERLINE & CROSS BAR WHITE LIGHT - 2 WATTS (ICAO FIGURE 2.1) CD = Candelas in white light -24 CD = Candelas in red light APPROACH SIDE ROW RED LIGHT - 2 WATTS (ICAO FIGURE 2.2) 5 CD MIN. 1 CD MIN. 5 CD MIN. 1, CD AVG. (Actual Average 11,747 CD Shown) 5 CD MIN. 1 CD MIN. 5 CD MIN. 1, CD AVG. (Actual Average 1,93 CD Shown) , CD 5 CD 16 5, CD 7,5 CD 1, CD 16 1, CD 5, CD 7,5 CD 1, CD CD = Candelas in green light THRESHOLD GREEN LIGHT - 2 WATTS (ICAO FIGURE 2.3) -24 CD = Candelas in green light THRESHOLD WING BAR GREEN LIGHT - 2 WATTS (ICAO FIGURE 2.4) 125 CD MIN. 25 CD MIN. 125 CD MIN. 25 CD AVG. (Actual Average 5,4 CD Shown) CD 2,5 CD 5 CD CD = Candelas in red light RUNWAY END RED LIGHT - 2 WATTS (ICAO FIGURE 2.) Application/Fixture Selection Table APPLICATION (ICAO, USAF, NATO, U.S. NAVY) White, Approach Centerline and Cross Bar Light Red, Approach Side Row Light Green, Runway Threshold Light Green, Runway Threshold Wing Bar Light Red, Runway End Light * Confirmed by CSA Letter of Attestation. CATALOG NUMBER 925-C-15-66* 925-C-2-66* 925-R-15-66* 925-R-2-66* 925-G G-2-66* 925-G-2-66* 925-R EATON S CROUSE-HINDS BUSINESS

26 CHS Controls AB Outline Drawing REAR COVER HOUSING ASSY Instruction Manual: 972 LENS LAMP LENS SEAL Shipping Weight: Shipping Volume: 4.5 lbs kg..7 cu. ft..2 cu. m SLIPFITTER BOLT, SLIPFITTER LEAD ASSEMBLY Accessories Catalog Shipping Weight Shipping Volume Description Number lb. kg. cu. ft. cu. m. Aiming Device 5133 Base L-67B, Class I, 24 Deep AC21242H Baseplate, 2 Hub, 12 Diameter AP Franigible Coupling with Compression Fitting Connector Kit L-23, AWG,.32 to.43 O.D. 54 Super-D4-D4 Heat Shrink Kit (1-piece) Heat Shrink Kit (2-piece) Mounting Plate 5516-S532 Isolation Transformer See Transformer Section Renewal Parts Description Part Number Description Part Number Bolt, Slipfitter 1A1-25D32 Filter, Absorption Clear 5256 Filter, Absorption Green 5251-G Filter, Absorption Red 5251-R Housing Assembly Lamp, PK3d, 1 watts, 6.6A Lamp, PK3d, 15 watts, 6.6A Lamp, PK3d, 2 watts, 6.6A Lead Assy., 6.6A, 6.5 (2m) Long 5136 Lens Seal 5126 Rear Cover Assembly 5124 Slipfitter, Less Hardware Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.25

27 Approach & Navigational Aids CHS Controls AB FH 3F Inset SFL Flashead Approach Light Compliances: FAA: AC 15/ ICAO Annex 14 Applications The in-pavement FH 3F is used in MALSR or ALSF sequenced flashing approach lighting systems, or wherever inset lights are preferred over elevated lights. The FH 3F is built with highest quality materials to ensure long life. Features Available for both voltage and current-driven applications IP67/Nema 6 Rating. Ordering Information Fixture Type: Input Power: 1 = Voltage operated with internal controller 3 = Current (series) operated Flashing Lights: Insert Number of Flashers Needed (3 Maximum Input Power: 12 = 12 V. 6 Hz 24 = 24 V. 6 Hz 23 = 23 V. 5 Hz F T S - - * FTS Series product are manufactured by Flash Technology, Franklin, TN. Dimensions: Shipping Weight: 6.1 H x 12 W 34.5mm x 155 mm 16.5 lbs. 7.5 kg EATON S CROUSE-HINDS BUSINESS

28 Approach & Navigational Aids CHS Controls AB FH 3F-2 Semiflush Runway Approach Sequenced Flashing Light Compliances: FAA: AC 15/ ICAO Annex 14 Applications The semiflush in-pavement FH 3F-2 is used in MALSR or ALSF sequenced flashing approach lighting systems, or wherever inset lights are preferred over elevated lights. The FH 3F-2 is built with highest quality materials to ensure long life. Features Available for both voltage and current-driven applications IP67 / Nema 6 Rating Elasped time meter. Ordering Information Fixture Type: Input Power: 12 = 12 V. 6 Hz 24 = 24 V. 6 Hz 23 = 23 V. 5 Hz 66 = 6.6A Constant Current (Series) Operated F T S 3 F 2 - * FTS Series product are manufactured by Flash Technology, Franklin, TN. Dimensions: Shipping Weight: 6.1 H x 12 W 34.5mm x 155 mm 16.5 lbs. 7.5 kg. Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.27

29 Approach & Navigational Aids CHS Controls AB IAL Inset Approach Light Compliances: ICAO Annex 14: Figures A2-1, A2-2, A2-3, A2-4, A2- Applications The IAL is an unidirectional inset approach light, inset threshold light and inset end light compliant to ICAO specifications. It is also a bidirectional ICAO threshold/ end fixture. Features Low profile,.5 (12 mm) Few parts to stock Easy to maintain no sealant required for prism Pressure test plug for seal integrity verification Long lamp life Quartz Halogen, 15 W, 6.6 A Ordering Information 5 6 A Fixture Type: 5 = Runway 6 = Model 6 ICAO Figures: CS = Figure A2-1 Clear, straight, unidirectional R2L = Figure A2-2 2 degree toe-left, red unidirectional R2R = Figure A2-2 2 degree toe-right, red unidirectional G3L = Figure A degree toe-left, green unidirectional G3R = Figure A degree toe-right, green unidirectional G2L = Figure A2-4 2 degree toe-left, green unidirectional G2R = Figure A2-4 2 degree toe-right, green unidirectional RS = Figure A2- Red, straight, unidirectional GR* = G3L / RS Bidirectional RG* = G3R / RS Bidirectional GS = Green, straight, unidirectional - - Table 1 ICAO Fixture 15W CS 3 L-23 Connection: P1 = One plug P2 = Two plugs (GR and RG units only) R2L 3 R2R 3 G3L 2 G3R 2 G2L 2 G2R 2 RS 1 GR 3 RG 3 GS EATON S CROUSE-HINDS BUSINESS

30 CHS Controls AB Typical Photometric Data 1 CD MIN. 2 CD MIN. 1, CD MIN. 2, CD AVG 25 CD MIN. 5 CD AVG 25 CD MIN. 5 CD MIN , 2, ICAO Fig. A2-1, 3 x 15W Lamp, White, Straight ICAO Fig. A2-2, 3 x 15W Lamp, Red, Toe-In (Toe Left Shown) 5 CD MIN. 1 CD AVG 5 CD MIN. 1 CD MIN. 5 CD MIN. 5 CD MIN. 1 CD AVG 1 CD MIN ICAO Fig. A2-3, 2 x 15W Lamp, Green, Toe-In (Toe Left Shown) ICAO Fig. A2-4, 2 x 15W Lamp, Green, Toe-In (Toe Left Shown) CD MIN. 25 CD MIN. 125 CD MIN. 25 CD AVG ICAO Fig. A2-, 1 x 15W Lamp, Red, Straight Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.29

31 CHS Controls AB Outline Drawing O-RING LENS GASKET LENS LAMP.5 (12) 1.25 (32).75 (19) 5.6 (144) (33) Dimensions: Inches (mm) Instruction Manual: 2421 Shipping Weight: Shipping Volume: 17. lbs. 7.7 kg..6 cu. ft..4 m 3 Accessories Description Part Number Description Part Number Base: L-6B, Class I, 24 Deep* AC24242Q233 Connector Kit L-23, AWG,.32 to.43 O.D. 54 Super-D4-D4 Heat Shrink Kit 1 Piece Heat Shrink Kit 2 Piece Lifting Tool Setting Jig Primary Connector Kit, Resin Filled Isolation Transformer KDR6 See Transformer Section Renewal Parts Description Part Number Description Part Number Bottom Cover Assembly with Power Lead, -1 = 1 lead, -2 = 2 leads 2126-X Gasket Bottom Cover Lamp 15 W, 6.6 A 2112 Lens Replacement Kit Green Lens Replacement Kit Red Lens Replacement Kit White G** R*** C**** * Fixture with total lamp wattage greater than 15W should not be mounted on 12 inch diameter bases less than 2 inches (5mm) deep. Class II bases are not recommended for this application. ** Includes G lens, lens boot, 2111 lens retaining gasket and gasket lubricant. *** Includes R lens, lens boot, 2111 lens retaining gasket and gasket lubricant. 3.3 EATON S CROUSE-HINDS BUSINESS

32 Approach & Navigational Aids CHS Controls AB IALE Inset Approach Light Compliances: Designed in accordance with FAA Specification E-2952 for high intensity approach lighting applications and FAA Specification E-296 for MALSR applications. ETL tested to meet photometric requirements for FAA Specification E-2952 and E-296. Complies with UFC specification. Applications The Crouse-Hinds IALE semi-flush fixture is used in FAA high intensity approach lighting systems in the runway overrun pavement. They are also used at other locations beyond the overrun that require a low profile light fixture. The fixtures are unidirectional and provide applicable light beam colors of green for threshold, red for side row barrettes and white for centerline barrettes and crossbars. Features Low profile,.5 (12 mm) Few parts to stock Easy to maintain no sealant required for prism Pressure test plug for seal integrity verification Ordering Information 5 6 A Fixture Type: 5 = Runway 6 = Model 6 FAA Specifications: C52 = FAA-E-2952, Clear C6 = FAA-E-296, Clear G52 = FAA-E-2952, Green G6 = FAA-E-296, Green R52 = FAA-E-2952, Red UFC Specifications: GX1 = UFC , Green Straight, Blank, Unidirectional GR2 = UFC , Green Straight, Red Straight, Bidirectional RX1 = UFC , Red Straight, Blank, Unidirectional L-23 Connection: P1 = One plug P2 = Two plugs - - Long lamp life Quartz Halogen, 15 W, 6.6 A Table 1 FAA 15W C52 3 G52 2 R52 3 C6 1 G6 2 GX1 2 GR2 3 RX1 1 Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.31

33 CHS Controls AB Typical Photometric Data 1 CD MIN. 1 CD MIN ,,5 4 1,, FAA-E-296, 56A-C6 15W Lamp, White FAA-E-296, 56A-G6 2 x 15W Lamp, Green 1, CD MIN. REQ D 1, CD,5 CD 1,5 MIN. 7,5 CD MIN. 6,4 CD 7,5 CD FAA-E-2952, 56A-C52 3 x 15W Lamp, White FAA-E-2952, 56A-G52 2 x 15W Lamp, Green MIN. 4, CD MIN. 3,4 CD 4, CD 1, CD 5, CD MIN. 1, CD MIN. 5, CD , CD MIN. AVG FAA-E-2952, 56A-R52 3 x 15W Lamp, Red UFC x 15W Lamp, Green 3.32 EATON S CROUSE-HINDS BUSINESS

34 CHS Controls AB Outline Drawing O-RING LENS GASKET LENS LAMP.5 (12) 1.25 (32).75 (19) 5.6 (144) (33) Dimensions: Instruction Manual: Inches (mm) 2623 (FAA) 2645 (UFC) Shipping Weight: kg. Shipping Volume:.6 cu. ft..4 m 3 Accessories Description Part Number Description Part Number Adaptor ring, 15 base with 12 fixture Base: L-6B, Class I, 24 Deep* AC24242Q233 Connector Kit L-23, AWG,.32 to.43 O.D. 54 Super-D4-D4 Heat Shrink Kit 1 Piece Heat Shrink Kit 2 Piece Lifting Tool Isolation Transformer See Transformer Section Renewal Parts Description Part Number Description Part Number Bottom Cover Assembly with power lead, -1= 1 lead -2 = 2 leads 2126-X Gasket Bottom Cover Gasket Lubricant 5.3 oz. Container Lamp 15 W, 6.6 A 2112 Lens Replacement Kit Green G** Lens Replacement Kit Red R** Lens Replacement Kit White C** * Fixture with total lamp wattage greater than 15 W should not be mounted on 12 diameter base less than 2 inches (5mm) deep. Class II bases are not recommended for this application. ** Includes lens, lens boot, lens retaining gasket and gasket lubricant. Home Office: United States International Offices: Canada China Dubai Mexico Brazil 3.33

35 Approach & Navigational Aids CHS Controls AB WC Wind Cone Compliances: FAA AC 15/ : L-6 & L-7 NASAO Guidelines Applications A wind cone visually indicates prevailing wind direction at a particular location on an airfield or heliport. FAA Size 2 wind cones are used for airports at a central position on the airfield. FAA Size 1 rigid wind cones are installed at small airfields and heliports. FAA Size 1 frangible wind cones are called supplemental wind cones as they are installed in addition to the main wind cone adjacent to each runway touchdown zone to indicate local wind conditions. Wind cones are commonly supplied with a single obstruction light and four floodlights to illuminate the windsock. The customer may select lighting, windsock color, and windsock material without affecting FAA approval. Rigid wind cones use hinged poles which allow the top windsock and lighting assembly to be lowered for servicing. Features ETL Certified Ordering Information Windcone Type: L - 6 L - 7 FAA Size: S1 = Size 1 - Feet Long S2 = Size 2-12 Feet Long (L-7 Only) FAA Style: UN = Unlighted EX = External IN = Internal Power Source: NON = None 12 = 12 VAC 12 = 12 VDC 66A = 6.6 Amp Lamp Type: N = None/Halogen 5 = LED WC products are manufactured by HALI-BRITE INC. Crosby, MN Application Notes L6-S1-IN-12-ON-5, L6-S1-IN-12-ON-N, L6-S1-IN-66A-ON-5, L7-S1-IN-12-ON-5, L7 -S1-IN-12-ON-N and L7-S1- IN-66A-ON-5 these FAA styles cannot be certfified L6-S1-IN-66A-ON-5, L7-S1-IN-66A-ON-5, L7-S2-IN-66A-ON-5 requires a 2W transformer, sold separately L6-S1-EX-66A-ON-5, L7-S2-EX-66A-ON-5 requires a 3W transfomer, sold separately 3.34 EATON S CROUSE-HINDS BUSINESS