Pulse Niru Company. General Catalogue.

Transcription

1 Pulse Niru Company General Catalogue

2 Pulse Niru Company initiated its activities since 2003 in manufacturing Pulsed Power equipment such as High Energy Pulse Discharge Capacitors for High Energy Industries and High Energy Density Physics (HEDP) Centers. We manufacture our products under global standards. Also we manufacture Spark Gap Switch from the best Cu-W alloy with long lifetime and the capability of flowing more than 100 s KA current. Since 2004, with regard to application of pulsed power technology in HEDP, this institute has commenced and fulfilled many projects in this field. Now this firm has many activities in the following fields: Pulsed and electrical Power: Main part of activity in this firm is related to pulsed power. In this field we manufacture High Energy Pulse Discharge Capacitors and other high power capacitors, spark gap switch, pulsed power diagnostic instrument. Energy and Plasma: This section is active in the production of high energy density physics systems and laboratory controlled fusion system, such as Plasma Focus and Tokomak. Optics and Laser: In this division the high energy laser power supply for medical and industrial application is designed and manufactured. Microwave: One of the most important activities of this division is production of power supply for driving microwave tubes (modulator) applied in particle accelerator and X-ray for medical and radiotherapy application.

3 hat are our products? We are manufacturing basic Subsystems that are used in systems establishment including: Our production on pulsed power and electrical power field: Pulse discharge energy storage capacitors Voltage: KV Capacitance: uf Inductance: nh Peak Current: KA Case: metal (steel) Repetition Rate: Hz Medium Voltage (MV) Shunt capacitors for Power factor correction Capacitors with 2 bushings. Internal connection: Single phase, both poles are connected through the bushings with the terminals. Capacitor container has to be grounded. Technical Data Rated output Rated voltage Rated frequency Dielectric Impregnate 100 kvar 500 kvar 1,3 up to 13,85 kv 50 Hz (60 Hz on request) Polypropylene Film PXE - and PCB - free

4 Low Voltage (LV) Shunt capacitors for power factor correction Dielectric: Electrode material: Impregnant: Rated voltage and frequency : Test voltage terminal/terminal: Test voltage terminal/casing: Temperature limits: Cooling system: Polypropylen film Aluminium foil NON-PCB liquid 230 to 3000 V, 50 Hz (60 Hz on request) AC 2.15 x U N 10s 3 to 16 KV, 50 Hz 10s Air cooling = C Water cooling = C Natural air or water cooling Medium Voltage Capacitor bank for A.C power systems Technical data: Rated output: Rated voltage: Frequency: Insulation level: Connection: 1.2 Mvar 30 Mvar 1 kv up to 36 kv 50 Hz 70/170 kv YY

5 Oil Impremation Plant: Pulse niru auto clave is specially designed considering the requirement for oil impregnation plant of capacitors. Technical specification : Chamber size : 3500 mm ( Length ) 1150 mm ( Width ) 1350 mm ( Height ) Internal volume : 5.5 cubic meter or more on request Vacuum leak rate : below 100 micron/ hour Heating method : secondary heating method by thermic fluid Door opening : common door opening ( motorized is optional ) Door sealing : high quality O ring Viewing window : 4 set with toughened glasses Feed through : 2 terminal with proper insulation Chamber inside finishing : sand blasting with Zinc coating Insulating material : wool Oil tank : two oil tank ( main & intermediate ) Heat exchanger : Fin pipe Oil pump : 1.8 KW,220 AC, HZ. 8 Ltrs./min Injection method : each capacitors (or trans) will impregnate separately. 3 Vacuum : up to 10 torr High voltage high coulomb gas discharge spark gap switch Trigger Method: passive/trigatron/field distortion Voltage: KV Inductance: nh Peak Current: KA Insulator: Ceramic / Teflon Repetition Rate: Hz Charge transfer: up to 50 coul Life time : C/D

6 main systems: Designing and making an expansion/compression magnetic forming system Fast discharge pulse forming systems generator of metallic and non-metallic nano-powders by wire discharge method Designing and making focusing plasma system, TOKAMAK for fusion research, and Q-Machine generator

7 Evaporation system for coating aluminum and cooper deposition Designing and making two 2 MW linear accelerator And other main systems Like: sterilizing food industries by PEF method High voltage switch mode power supply Marx generator design and fabrication Designing and making optical speedometer system, VISAR Low jitter, high power laser diode driver And at the moment, this company is one the biggest research centers in the field of high energy density physics in the Middle East.

8 This is our contact detail If you are interested to try our products, please feel free to contact us. Our contact detail is as following; Marketing Manager Address Mohsen Abdollahi Tehran, IRAN Tel Fax: Website