Features. Models Adjustable Output Current Range. 150W AOC Driver for High Bay. EUR-150SxxxDV(SV)

Transcription

1 UR150SxxxV(SV) Features Inventronics patented metal case (Patent NO.: ) High fficiency (Up to 92.5%) Full Power at Wide Output urrent Range (onstant Power) Adjustable Output urrent (AO) with Potentiometer (SV models) Adjustable Output urrent (AO) with Programmability (V models) 010V/PWM immable (Only V models) Input Surge Protection: 4kV lineline, 4kV lineearth AllAround Protection: OVP, SP, OTP Waterproof (IP65) SLV Output Suitable for Independent Use 5 Years Warranty escription The UR150SxxxV(SV) series is a 150W, constantcurrent, AO L driver that operates from Vac input with excellent power factor. It is designed in round shape and specially created for bay lighting. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure troublefree operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Adjustable Output urrent Range FullPower urrent Range (1) efault Output urrent Input Voltage Range (2) Output Voltage Range Max. Typical Output fficiency Power (3) Power Factor 120Vac 220Vac Model Number (4) 90~305 Vac/ mA mA 3150mA 22 ~ 61Vdc 150 W 127~250 Vdc 92.5% UR150S350V 90~305 Vac/ mA mA 3150mA 22 ~ 61Vdc 150 W 127~250 Vdc 92.5% UR150S350SV 90~305 Vac/ mA mA 4200mA 14 ~ 39Vdc 150 W 127~250 Vdc 91.5% UR150S560V 90~305 Vac/ mA mA 4200mA 14 ~ 39Vdc 150 W 127~250 Vdc 91.5% UR150S560SV Notes: (1) Output current range with constant power at 150W (2) ertified voltage range: Vac or Vdc (except, PS and KS) (3) Measured at full load and 220Vac input (see below General Specifications for details). (4) SLV Output. 1 / 14 Tel: Fax: sales@inventronicsco.com

2 UR150SxxxV(SV) Output Voltage(V) (245,61) (10%Ioset,150/Ioset) UR150S350V (1470,61) 60%Load (2450,61) (350,22) (Ioset,22) (Ioset,150/Ioset) 100%Load IV Operation Area (3500,43) (3500,26) (3500,22) 12 Good Performance Area Programmed Operating Area Allowed Operating Area Output urrent (ma) Note: 2450mA Ioset 3500mA Output Voltage(V) (2450,61) (2450,36.5) (2450,22) UR150S350SV 60%Load Good Performance Area 100%Load (3500,43) (3500,26) (3500,22) Allowed Operating Area Output urrent (ma) Note: 2450mA Ioset 3500mA (385,39) UR150S560V (2310,39) (3850,39) (3850,39) UR150S560SV Output Voltage(V) (10%Ioset,150/Ioset) 60%Load (560,14) (Ioset,14) (Ioset,150/Ioset) 100%Load (5600,27) (5600,16) (5600,14) 8 Good Performance Area Programmed Operating Area Allowed Operating Area Output urrent (ma) Note: 3850mA Ioset 5600mA Output Voltage(V) 100%Load 28 (5600,27) (3850,23.5) (3850,14) (5600,16) (5600,14) 7 Good Performance Area Allowed Operating Area Output urrent (ma) 60%Load Note: 3850mA Ioset 5600mA Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 90 Vac 305 Vac 127~250 Vdc Input Frequency 47 Hz 63 Hz Leakage urrent 0.70 ma I605981; 240Vac/ 60Hz Input A urrent Inrush urrent(i 2 t) 1.85 A 2 s PF 0.90 TH 20% TH 10% 1.87 A Measured at full load and 100 Vac input A Measured at full load and 220 Vac input. 2 / 14 At 220Vac input, 25 cold start, duration=752 μs, 10%Ipk10%Ipk. See Inrush urrent Waveform for the details. At Vac, 5060Hz, 60%100% Load (90150W) At Vac, 5060Hz, 75%100% Load ( W) Tel: Fax: sales@inventronicsco.com

3 UR150SxxxV(SV) Output Specifications Parameter Min. Typ. Max. Notes Output urrent Tolerance 5%Ioset 5%Ioset At full load condition Output urrent Setting(Ioset) Range UR150S350V UR150S350SV UR150S560V UR150S560SV Output urrent Setting Range with onstant Power UR150S350V UR150S350SV UR150S560V UR150S560SV Total Output urrent Ripple (pkpk) Output urrent Ripple at < 200 Hz (pkpk) 245 ma 2450 ma 385 ma 3850 ma 2450 ma 2450 ma 3850 ma 3850 ma 3500 ma 3500 ma 5600 ma 5600 ma 3500 ma 3500 ma 5600 ma 5600 ma 5%Iomax 10%Iomax At full load condition. 20 MHz W 2%Iomax Startup Overshoot urrent 10%Iomax At full load condition At full load condition. Only this component of ripple is associated with visible flicker. No Load Output Voltage UR150S350V/SV UR150S560V/SV 80 V 50 V Line Regulation ±0.5% Measured at full load Load Regulation ±1.5% Turnon elay Time Temperature oefficient of Ioset 1.0 s 0.5 s 12V Auxiliary Output Voltage 10.8 V 12 V 13.2 V 12V Auxiliary Output Source urrent Note: All specifications are typical at 25 unless otherwise stated. General Specifications 3 / 14 Measured at 120Vac input, 60%100% Load Measured at 220Vac input, 60%100% Load 0.03%/ ase temperature = 0 ~Tc max 0 ma 20 ma Return terminal is im Parameter Min. Typ. Max. Notes fficiency at 120 Vac input: UR150S350V/SV Io=2450 ma Io=3500 ma UR150S560V/SV Io=3850 ma Io=5600 ma fficiency at 220 Vac input: UR150S350V/SV Io=2450 ma Io=3500 ma UR150S560V/SV Io=3850 ma Io=5600 ma 87.0% 86.5% 86.5% 85.0% 90.5% 90.0% 89.5% 88.0% 90.0% 89.5% 89.5% 88.0% 92.5% 92.0% 91.5% 90.0% Tel: Fax: sales@inventronicsco.com Measured at full load and steadystate temperature in 25 ambient; (fficiency will be about 2.0% lower if measured immediately after startup.) Measured at full load and steadystate temperature in 25 ambient; (fficiency will be about 2.0% lower if measured immediately after startup.)

4 UR150SxxxV(SV) General Specifications (ontinued) Parameter Min. Typ. Max. Notes fficiency at 277 Vac input: UR150S350V/SV Io=2450 ma Io=3500 ma UR150S560V/SV Io=3850 ma Io=5600 ma 90.5% 90.5% 90.0% 88.5% MTF Lifetime Operating ase Temperature for Safety Tc_s Operating ase Temperature for Warranty Tc_w 92.5% 92.5% 92.0% 90.5% 305,000 Hours 89,000 Hours Measured at full load and steadystate temperature in 25 ambient; (fficiency will be about 2.0% lower if measured immediately after startup.) Measured at 220Vac input, 80%Load and 25 ambient temperature (MILHK 217F) Measured at 220Vac input, 80%Load and 70 case temperature; See lifetime vs. Tc curve for the details ase temperature for 5 years warranty Storage Temperature Humidity: 5%RH to 100%RH imensions Inches ( H) Millimeters ( H) 5.90 x x 72 Net Weight 1610g Note: All specifications are typical at 25 unless otherwise stated. imming Specifications Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin Source urrent on Vdim (+)Pin imming Output Range UR150S350V UR150S560V UR150S350V UR150S560V Recommended imming Input Range 20 V 20 V 200 ua 300 ua 450 ua Vdim(+) = 0 V 10%Ioset Ioset 245 ma 385 ma Ioset PWM_in High Level 3 V 10 V 2450 ma Ioset 3500 ma 3850 ma Ioset 5600 ma 245 ma Ioset < 2450 ma 385 ma Ioset < 3850 ma 0 V 10 V efault 010V dimming mode. PWM_in Low Level 0.3 V 0.6 V PWM_in Frequency Range 200 Hz 2 KHz imming mode set to PWM in P interface. PWM_in uty ycle 1% 99% 4 / 14 Tel: Fax: sales@inventronicsco.com

5 UR150SxxxV(SV) Safety &M ompliance Safety ategory Standard N , N G , G KS KS 7655 MI Standards N 55015/G (1) N /G N MS Standards N N N N N N N N Notes onducted emission Test &Radiated emission Test Harmonic current emissions Voltage fluctuations & flicker Notes lectrostatic ischarge (S): 8 kv air discharge, 4 kv contact discharge RadioFrequency lectromagnetic Field Susceptibility TestRS lectrical Fast Transient / urstft Surge Immunity Test: A Power Line: line to line 4 kv, line to earth 4 kv onducted Radio Frequency isturbances TestS Power Frequency Magnetic Field Test Voltage ips lectromagnetic Immunity Requirements Applies To Lighting quipment Note: (1) This L driver meets the MI specifications above, but MI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. erating 5 / 14 Tel: Fax: sales@inventronicsco.com

6 UR150SxxxV(SV) Lifetime vs. ase Temperature Inrush urrent Waveform fficiency vs. Load UR150S350V/SV(Io=2450mA) UR150S350V/SV(Io=3500mA) 6 / 14 Tel: Fax: sales@inventronicsco.com

7 UR150SxxxV(SV) UR150S560V/SV(Io=3850mA) UR150S560V/SV(Io=5600mA) Power Factor Total Harmonic istortion 7 / 14 Tel: Fax: sales@inventronicsco.com

8 UR150SxxxV(SV) Protection Functions Parameter Over Temperature Protection Short ircuit Protection Over Voltage Protection Notes ecreases output current, returning to normal after over temperature is removed. Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Limits output voltage at no load and in case the normal voltage limit fails. imming 010V imming The recommended implementation of the dimming control is provided below. Implementation 1: Input Notes: 1. The dimmer can also be replaced by an active 010V voltage source signal or passive components like resistors and zener. 2. o NOT connect im to the output V or V+, otherwise the driver will not work properly. 3. If 010V dimming is not used, im + should be open. PWM imming L N G Vac Inventronics L river V+(RN) V(LU) Vaux(LK/WHT) im+(pur) im(gry) PWM Signal Implementation 2: Positive logic 8 / 14 Tel: Fax: sales@inventronicsco.com

9 UR150SxxxV(SV) V+(RN) L N Vac Inventronics L river V(LU) Vaux(LK/WHT) im+(pur) G im(gry) PWM Signal Implementation 3: Negative logic Notes: 1. o NOT connect im to the output V or V+, otherwise the driver will not work properly. 2. If PWM dimming is not used, im + should be open. 3. When PWM negative logic dimming mode and im+ is open, the driver will output minimum current. Programming onnection iagram (Only V models) Note: The driver does not need to be powered on during the programming process. Please refer to PRGMUL2 MultiProgrammer datasheet for details. 9 / 14 Tel: Fax: sales@inventronicsco.com

10 UR150SxxxV(SV) Installations Part Number Suffix Product Type enter Wire Feed Outside Wire Feed Product Appearance Installation Type aution: 1. omplete visual inspection prior to assembly to insure driver is received in proper condition. 2. Thread length for mounting accessory (hook, ring, etc.) should be 1622mm. After mounting accessory (hook, ring, etc.) is installed an M4 set screw should be secured in the open location on the driver collar. 3. Maximum weight of combined luminaire/driver assembly should not exceed 11Kg. 10 / 14 Tel: Fax: sales@inventronicsco.com

11 UR150S UNLSS OTHRWIS SPIFI TOLRANS AS FOLLOWS ISO AN ISO O NOT SAL RAWING SURF. ROUGHNSS TO IMNSIONS AR IN MM NOTS HANG WORKMANSHIP SHALL TH ST OMMRIAL QUALITY 3.2 UR150SxxxV(SV) MHANIAL OUTLIN RAWING Mechanical Outline UR150SxxxV0000 M4 10±2 IMMING WIR(V H05RNF 3*0.5mm 2 6.3) OUTPUT(V H05RNF 2*1.0mm 2 6.8) 440± ±30 60 ±10 25 Hositing thread: N15 5±1 GRAY PURPL LAK/WHIT A/L (ROWN) A/N (LU) GN (YLLOW/GRN) 45±5 35±5 25±3 10±2 50±5 400± ±5 15±2 V+ (ROWN) V (LU) Tc INPUT(V H05RNF 3*1.0mm 2 7.2) A A FRN RAWING NO. PROJ: Unspecified tolerance:±1.5 RAWN MATRIAL: HK SSML NO. F 1 UR150SxxxSV0000 M4 10±2 3 1 调整外观图格式 faxin 增加 M4 孔 rook 灯具安装孔加厚 rook MARK N NO. AT OUTPUT(V H05RNF 2*1.0mm 2 6.8) rook PROJ: ±30 MFG SHT Hositing thread: AUTHORIZ: N15 60 ±10 FINISH: WIGHT SAL VRSION SRIPTION: P/N: UR150SxxxV0000 UR150S00008 F A/L (ROWN) A/N (LU) GN (YLLOW/GRN) POTNTIOMTR 12 50±5 15±2 V+ (ROWN) V (LU) 10±2 50±5 31 Tc ±30 INPUT(V H05RNF 3*1.0mm 2 7.2) RFRN RAWING NO. PROJ: Unspecified tolerance:±1.5 RAWN HK ASSML NO. F / 14 Tel: Fax: sales@inventronicsco.com

12 UR150S UR150SxxxV(SV) UR150SxxxV0001 M4 10±2 IMMING WIR(V H05RNF 3*0.5mm 2 6.3) OUTPUT(V H05RNF 2*1.0mm 2 6.8) 440± ±30 60 ±10 45±5 35±5 5±1 GRAY PURPL LAK/WHIT A/L (ROWN) A/N (LU) GN (YLLOW/GRN) 25± ±5 15±2 V+ (ROWN) V (LU) Tc M ±2 50± ± INPUT(V H05RNF 3*1.0mm 2 7.2) A A RN WING NO. MHANIAL OUTLIN RAWING PROJ: Unspecified tolerance:±1.5 RAWN UR150SxxxSV0001 M4 OUTPUT(V H05RNF 2*1.0mm 2 6.8) 10± ±30 60 ±10 POTNTIOMTR 50±5 15±2 A/L (ROWN) A/N (LU) GN (YLLOW/GRN) 12 V+ (ROWN) V (LU) M ±2 50±5 31 Tc ±30 INPUT(V H05RNF 3*1.0mm 2 7.2) RFRN RAWING NO. PROJ: Unspecified tolerance:±1.5 RAWN HK ASSML NO. F / 14 Tel: Fax: sales@inventronicsco.com

13 UR150SxxxV(SV) Optional Metal Parts HKK1500 LTM1000 PROJ: Unspecified tolerance:±1 N15 PROJ: Unspecified tolerance:±1 M10*1.5 RoHS ompliance Our products comply with the uropean irective 2011/65/, calling for the elimination of lead and other hazardous substances from electronic products. RFRN RAWING NO. 13 / 14 Tel: Fax: sales@inventronicsco.com

14 UR150SxxxV(SV) Revision History hange ate Rev. escription of hange Item From To A atasheets Release / / Features / Updated Mechanical Outline / Updated Input Specifications PF/TH (Notes) Updated Output Specifications Temperature oefficient of Ioset Updated Safety &M ompliance / Updated Mechanical Outline / Updated Features 5 Years Warranty Added escription / Updated Models Notes(2) Updated General Specifications ase temperature for 5 years warranty Updated Mechanical Outline Optional Metal Parts Added 14 / 14 Tel: Fax: sales@inventronicsco.com