Inspection Report N : SOF/16/8703 Date of issuance: 30/05/2016 Page 1 of 11

Transcription

1 Inspection Report N : SOF/16/8703 Date of issuance: 30/05/2016 Page 1 of 11 Inspection requested by: Institute of Metal Science, Equipment and Technologies Akad. A. Balevski with Hydroarodynamics Centre BAS (IMSETHC-BAS) BV Inspection performed as Recognized Authority: P/o nr: (client to BV) Inspection performed on: 26/05/2016 Previous Inspection: n/a (.specify what recognition ) P/o nr: from 16/05/2016 (client to Manufacturer) Location: Tehnopol LTD technical laboratory and field polygon near to Stara Zagora, Bulgaria. Next Inspection: n/a MATERIAL / SUPPLY / SUBJECT OF INSPECTION ITEM / TAG Nr QTY Radio communication module BEEHIVE CELL TD01 TRS No Yes REFERENCE DOCUMENTS: See continuation sheet for additional documents: Yes No Title Reference n Rev. Approved by Date RCM BEEHIVE TD 01 - Technical requirements 05 BC ТИ n/a Prof. d-r Stoychev 05/19/16 RCM BEEHIVE TD 01 Functionality testing program 05 BC ПИ n/a Prof. d-r Stoychev 05/19/16 RCM BEEHIVE TD 01 - Functionality testing methodology 05 BC МИ n/a Prof. d-r Stoychev 05/19/16 INSPECTION RESULT Satisfactory Unsatisfactory: Non Conformities Raised (Total number of NCR - 0.) BV Inspector: Aleksandar Pandov BV Office: BV SOF BV Coordinator: Tane Tanev Attachments: Yes (Total number of pages: 40) No Distribution: CLIENT MANUFACTURER BV OTHER ( specify)

2 Inspection Report N : SOF/16/8703 Date of issuance: 30/05/2016 Page 2 of 11 Stage of inspection : Before manufacturing During manufacturing Final Packing Type of inspection : Pre-inspection meeting Document and QC record review Visual examination, checks Witnessing tests Manufacturing progress status Vendor assessment Final inspection Packing Stamping : No Results of inspection : Satisfactory Unsatisfactory Non Conformities Reports (NCR): NCR s issued during reported period : NO List of outstanding NCR s : n/a Main Conclusions & Remarks: (for details see continuation sheet) Next visit scheduled: n/a INSPECTION DETAILS: ATTENDEES : See continuation sheet for additional documents: Yes No Name Company Title (*) Note Vencislav Pehlivanski IMSETHC-BAS Gl. As., d-r, M. Sc. Stiliyan Goergiev IMSETHC-BAS mag Nikola Obreshkov IMSETHC-BAS mag Stanimir Minev Tehnopol LTD M Sc. (*) specify if BV inspector has role as supervisor or mentor (e.g. BV Inspector supervisor ) MEASURING EQUIPMENT USED: See continuation sheet for additional documents: Yes No

3 Inspection Report N : SOF/16/8703 Date of issuance: 30/05/2016 Page 3 of 11 MEASURING EQUIPMENT USED: See continuation sheet for additional documents: Yes No Equipment Type Equipment Identity n Last Calibration date Expiry date FLUKE /30/ /29/2017 Anritsu MS 2711D Spectrum Master S /06/ /05/2019 LIST OF NON CONFORMITIES ISSUED: NC identification n NC01 NC02 Description of the Anomaly n/a n/a LIST OF NON CONFORMITIES CLOSED: NC id number Ref report n Issued on Description n/a LIST OF ATTACHEMENTS Type of document Identification number Description testing program Attachment 1 RCM BEEHIVE TD 01 Functionality testing program RCM BEEHIVE TD 01 - Functionality testing methodology Attachment 2 testing methodology RCM BEEHIVE TD 01 - Technical Technical requirements Attachment 3 requirements Calibration Certificate Attachment 4 Calibration Certificate of FLUKE 23 Order of IMETHAC manager for Order Attachment 5 conducting the test Communication test Attachment 6 Successful communication window Test protocol Attachment 7 Receive mode power consumption Test protocol Attachment 8 Transmitter frequency band and channels Test protocol Attachment 9 Working distance Test protocol Attachment 10 Transmitter mode power consumption Test protocol Attachment 11 Test of power supply voltage

4 Inspection Report N : SOF/16/8703 Date of issuance: 30/05/2016 Page 4 of 11 Description of the inspections carried out : 1. Health and safety comments. All safety rules when working with electrical equipment are complied. There are no remarks or obstructions. 2. Manufacturing Progress Status (Quantities). The tested device was provided from IMSETHC-BAS (see pic 2) 3. Details of inspection activities carried out with respect to scope of work The inspection was carried out in accordance with the technical requirements (att 3) test methodology (att 2) test programs (att 1) provided by the client. The team performed the test is determined by order of the client, as follows: - Chairman Head Ass, d-r, M.Sc.Vencislav Pehlivanski, mag. Stiliyan Goergiev, mag. Nikola Obreshkov from IMSETHC-BAS and M.Sc. Stanimir Minev from Tehnopol LTD (see pic. 1). The test was carried out in two successive stages. Stage 1 - measuring electrical characteristics of RCM BEEHIVE TD 01. They were performed in the laboratory of Technopol Ltd. with calibrated measuring devices, as shown in the section MEASURING EQUIPMENT USED to this report. The results of measurements are shown in pic. 5 to 10. They are documented in protocols att. 7, 8, 10 and 11. The measured values correspond to those of the technical requirements (att. 3). Stage 2 - measuring the distance of liaison urban distance up to 600 meters in terms of direct sight distance up to 3500 meters. Measurements were made with two antennas provided by customers - small and big, urban and ground with direct visibility in vehicles provided by the company Technopol Ltd. The results of measurements are shown in pic. 11 to 40 and are documented in a report (att. 9). The measured values match those of technical requirements (att. 3). 4. Surveillance with reference to ITP. Inspection was conducted in the full range of client technical requirements (att.3). Results are documented according client requirements in 5 protocols (att. 7 to 11). 5. Results of Inspection The result of inspection is positive. The measured values correspond to those of the technical requirements (att. 3). They were made with calibrated measuring devices, as shown in the section MEASURING EQUIPMENT USED to this report. 6. Problems pending. No problems were observed during the inspection. Digital Pictures (with Legend)

5 Inspection Report N : SOF/16/8703 Date of issuance: 30/05/2016 Page 5 of 11 Pic 1 - The testing team Pic 2 - Tested device BEEHIVE TD 01 Pic 3 - Supporting device TD 03 Pic 4 - The device is working successful communication Pic 5 - Measuring device FLUKE 23 Pic 6 - Receive mode power consumption (scope 300 ma)

6 Inspection Report N : SOF/16/8703 Date of issuance: 30/05/2016 Page 6 of 11 Pic 7 - Transmitter mode power consumption (scope 10A) Pic 8 - Transmitting on 1 channel Pic 9 - Transmitting on 20 channel Pic 10 - Transmitting on 40 channel

7 Inspection Report N : SOF/16/8703 Date of issuance: 30/05/2016 Page 7 of 11 Pic 11 - Start the communication City mode DT 01 Pic 12 - Start the communication City mode DT 03 Pic 13 - Small antenna 100 meters distance Pic 14 - Small antenna 200 meters distance Pic 15 - Small antenna 300 meters distance Pic 16 - Small antenna 400 meters distance Pic 17 - Small antenna 500 meters distance Pic 18 - Small antenna 580 meters distance bad signal

8 Inspection Report N : SOF/16/8703 Date of issuance: 30/05/2016 Page 8 of 11 Pic 19 - Big antenna 580 meters distance Pic 20 - Big antenna 500 meters distance Pic 21 - Big antenna 400 meters distance Pic 22 - Big antenna 300 meters distance Pic 23 - Big antenna 200 meters distance Pic 24 - Big antenna 100 meters distance

9 Inspection Report N : SOF/16/8703 Date of issuance: 30/05/2016 Page 9 of 11 Pic 25 - Big antenna 0 meters distance Pic 26 - Point 0 in the field mode Pic 27 - Big antenna 500 meters Pic 28 - Big antenna 1000 meters Pic 29 - Big antenna 1500 meters Pic 30 - Big antenna 2000 meters

10 Inspection Report N : SOF/16/8703 Date of issuance: 30/05/2016 Page 10 of 11 Pic 31 - Big antenna 2500 meters Pic 32 - Big antenna 3000 meters Pic 33 - Big antenna 3500 meters Pic 34 - Small antenna 2900 meters Pic 35 - Small antenna 2500 meters Pic 36 - Small antenna 2000 meters

11 Inspection Report N : SOF/16/8703 Date of issuance: 30/05/2016 Page 11 of 11 Pic 37 - Small antenna 1500 meters Pic 38 - Small antenna 1000 meters Pic 39 - Small antenna 500 meters Punch List Items n/a END OF REPORT Inspected by: Inspector Industrial Services Name: Alexander Pandov Signature: Pic 40 - Small antenna 0 meters Checked by: Bureau Veritas Bulgaria (IND) Industry and Facility Development Manager Name: Tane Tanev Inspection Office: BV SOF Supervision during performance No Yes